[SOLVED] Mic does not work on Intel ICH8 (rev 3) sound card

Hi, folks.
I cannot get my sound card to record anything, using a built-in microphone. Audio output works just fine, though. I hope someone can help me, I have been banging my head against the wall for some time over this issue...
My laptop is Toshiba Satellite A200-1J0 (PSAE6E-04R036G3). alsamixer settings are fine, I tried supplementing additional options to /etc/modprobe.d/modprobe.conf, but no luck, tried some of the combinations (model=<> position_fix=<>).
When recording sound with gnome-sound-recorder, with Capture set as input, nothing is heard. Skype can't record anything, either. I can't even get the crackling or hissing sound like some users do.
Should I try to get the latest ALSA?
Debug details start from now on:
/etc/modprobe.d/modprobe.conf
options snd-hda-intel index=0 model=3stack position_fix=1
lsmod | grep snd
snd_seq_dummy 1099 0
snd_seq_oss 25304 0
snd_hda_codec_atihdmi 2051 1
snd_seq_midi_event 4452 1 snd_seq_oss
snd_hda_codec_realtek 179240 1
snd_seq 42628 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_hda_intel 18697 1
snd_seq_device 4313 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_hda_codec 56728 3 snd_hda_codec_atihdmi,snd_hda_codec_realtek,snd_hda_intel
snd_pcm_oss 33693 0
snd_mixer_oss 14810 1 snd_pcm_oss
snd_hwdep 5102 1 snd_hda_codec
snd_pcm 57479 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 16117 2 snd_seq,snd_pcm
snd 43847 13 snd_seq_oss,snd_hda_codec_realtek,snd_seq,snd_hda_intel,snd_seq_device,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_hwdep,snd_pcm,snd_timer
soundcore 5007 1 snd
snd_page_alloc 5809 2 snd_hda_intel,snd_pcm
lspci (parts of interest)
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at fc400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
01:00.0 VGA compatible controller: ATI Technologies Inc M76 [Radeon Mobility HD 2600 Series] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device ff00
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d0000000 (32-bit, prefetchable) [size=256M]
I/O ports at 2000 [size=256]
Memory at fc000000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at fc020000 [disabled] [size=128K]
Capabilities: <access denied>
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Subsystem: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at fc010000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
alsa-info.sh
upload=true&script=true&cardinfo=
!!ALSA Information Script v 0.4.58
!!Script ran on: Sat Jan 23 20:27:13 UTC 2010
!!Linux Distribution
Arch Linux \r (\n) (\l) DISTRIB_ID=arch
!!DMI Information
Manufacturer: TOSHIBA
Product Name: Satellite A200
!!Kernel Information
Kernel release: 2.6.32-ARCH
Operating System: GNU/Linux
Architecture: i686
Processor: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz
SMP Enabled: Yes
!!ALSA Version
Driver version: 1.0.21
Library version: 1.0.22
Utilities version: 1.0.22
!!Loaded ALSA modules
snd_hda_intel
snd_hda_intel
!!Sound Servers on this system
ESound Daemon:
Installed - Yes (/usr/bin/esd)
Running - No
Jack:
Installed - Yes (/usr/bin/jackd)
Running - No
!!Soundcards recognised by ALSA
0 [Intel ]: HDA-Intel - HDA Intel
HDA Intel at 0xfc400000 irq 22
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfc010000 irq 17
!!PCI Soundcards installed in the system
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
01:00.1 Audio device: ATI Technologies Inc RV630/M76 audio device [Radeon HD 2600 Series]
0c:04.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card Reader (SD/MMC/MS/MS PRO/xD)
!!Advanced information - PCI Vendor/Device/Susbsystem ID's
00:1b.0 0403: 8086:284b (rev 03)
Subsystem: 1179:ff00
01:00.1 0403: 1002:aa08
Subsystem: 1002:aa08
!!Modprobe options (Sound related)
snd-hda-intel: index=0 model=3stack position_fix=1
!!Loaded sound module options
!!Module: snd_hda_intel
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
single_cmd : N
!!Module: snd_hda_intel
bdl_pos_adj : 1,32,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : 0
id : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
index : 0,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
model : 3stack,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
patch : <NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>,<NULL>
position_fix : 1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
power_save : 1
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N,N
single_cmd : N
!!HDA-Intel Codec information
--startcollapse--
Codec: Realtek ALC268
Address: 0
Function Id: 0x1
Vendor Id: 0x10ec0268
Subsystem Id: 0x1179ff02
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=4, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[3]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x40 0x40]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x03 [Audio Output] wcaps 0x1d: Stereo Amp-Out
Amp-Out caps: ofs=0x40, nsteps=0x40, stepsize=0x03, mute=0
Amp-Out vals: [0x35 0x35]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x211: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0x1e]: 16 20 24 32
formats [0x1]: PCM
Node 0x07 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x24
Node 0x08 [Audio Input] wcaps 0x100111: Stereo
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x160]: 44100 48000 96000
bits [0x6]: 16 20
formats [0x1]: PCM
Connection: 1
0x23
Node 0x09 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0d [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0e [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00]
Connection: 1
0x02
Node 0x0f [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x1d
Node 0x10 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00] [0x80 0x80]
Connection: 3
0x03 0x1d 0x02
Node 0x11 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x12 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x13 [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Node 0x14 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x99130110: [Fixed] Speaker at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x0f
Node 0x15 [Pin Complex] wcaps 0x40018d: Stereo Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0001003c: IN OUT HP EAPD Detect
EAPD 0x0:
Pin Default 0x0221101f: [Jack] HP Out at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=00, enabled=0
Connection: 1
0x10
Node 0x16 [Pin Complex] wcaps 0x40010c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Connection: 1
0x0e
Node 0x17 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x02 0x02]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x02a11830: [Jack] Mic at Ext Front
Conn = 1/8, Color = Black
DefAssociation = 0x3, Sequence = 0x0
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x19 [Pin Complex] wcaps 0x40008b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x02 0x02]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x99a3093e: [Fixed] Mic at Int ATAPI
Conn = ATAPI, Color = Unknown
DefAssociation = 0x3, Sequence = 0xe
Misc = NO_PRESENCE
Pin-ctls: 0x24: IN VREF_80
Unsolicited: tag=00, enabled=0
Node 0x1a [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x02, stepsize=0x4f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x00003734: IN OUT Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
Node 0x1b [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1c [Pin Complex] wcaps 0x400001: Stereo
Pincap 0x00000020: IN
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1d [Pin Complex] wcaps 0x400000: Mono
Pincap 0x00000020: IN
Pin Default 0x4016852d: [N/A] Speaker at Ext N/A
Conn = Digital, Color = Purple
DefAssociation = 0x2, Sequence = 0xd
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Node 0x1e [Pin Complex] wcaps 0x400380: Mono Digital
Pincap 0x00000010: OUT
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=10
Processing Coefficient: 0x03
Coefficient Index: 0x01
Node 0x21 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x22 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x23 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x1d 0x1d]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x12
Node 0x24 [Audio Selector] wcaps 0x30010d: Stereo Amp-Out
Amp-Out caps: ofs=0x0b, nsteps=0x1f, stepsize=0x05, mute=1
Amp-Out vals: [0x00 0x00]
Connection: 7
0x18* 0x19 0x1a 0x1c 0x14 0x15 0x13
Codec: LSI ID 1040
Address: 1
Function Id: 0x2
Vendor Id: 0x11c11040
Subsystem Id: 0x11790001
Revision Id: 0x100200
Modem Function Group: 0x1
Codec: ATI R6xx HDMI
Address: 0
Function Id: 0x1
Vendor Id: 0x1002aa01
Subsystem Id: 0x00aa0100
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x40]: 48000
bits [0x2]: 16
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x201: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
Node 0x03 [Pin Complex] wcaps 0x400381: Stereo Digital
Pincap 0x00000094: OUT Detect HDMI
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Connection: 1
0x02
--endcollapse--
!!ALSA Device nodes
crw-rw----+ 1 root audio 116, 9 Jan 23 19:11 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 12 Jan 23 19:11 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 8 Jan 23 19:11 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 7 Jan 23 19:11 /dev/snd/hwC0D1
crw-rw----+ 1 root audio 116, 11 Jan 23 19:11 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 6 Jan 23 21:04 /dev/snd/pcmC0D0c
crw-rw----+ 1 root audio 116, 5 Jan 23 21:04 /dev/snd/pcmC0D0p
crw-rw----+ 1 root audio 116, 4 Jan 23 19:11 /dev/snd/pcmC0D1p
crw-rw----+ 1 root audio 116, 10 Jan 23 19:11 /dev/snd/pcmC1D3p
crw-rw----+ 1 root audio 116, 3 Jan 23 19:11 /dev/snd/seq
crw-rw----+ 1 root audio 116, 2 Jan 23 19:11 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Jan 23 19:11 .
drwxr-xr-x 3 root root 280 Jan 23 19:11 ..
lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:00:1b.0 -> ../controlC0
lrwxrwxrwx 1 root root 12 Jan 23 19:11 pci-0000:01:00.1 -> ../controlC1
!!Aplay/Arecord output
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC268 Digital [ALC268 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: ATI HDMI [ATI HDMI]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------Mixer controls for card 0 [Intel]
Card hw:0 'Intel'/'HDA Intel at 0xfc400000 irq 22'
Mixer name : 'Realtek ALC268'
Components : 'HDA:10ec0268,1179ff02,00100003 HDA:11c11040,11790001,00100200'
Controls : 21
Simple ctrls : 13
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 53 [83%] [-11.00dB] [on]
Front Right: Playback 53 [83%] [-11.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Front',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Front Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 2 [100%]
Front Right: 2 [100%]
Simple mixer control 'Line In Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 0 [0%]
Front Right: 0 [0%]
Simple mixer control 'Mic Boost',0
Capabilities: volume penum
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 2
Front Left: 2 [100%]
Front Right: 2 [100%]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 12
Mono:
Front Left: Playback 0 [0%] [-24.00dB] [on]
Front Right: Playback 0 [0%] [-24.00dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 29 [94%] [27.00dB] [on]
Front Right: Capture 29 [94%] [27.00dB] [on]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 0 [0%] [-30.00dB]
Front Right: Capture 0 [0%] [-30.00dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Line' 'CD'
Item0: 'Mic'
!!-------Mixer controls for card 1 [HDMI]
Card hw:1 'HDMI'/'HDA ATI HDMI at 0xfc010000 irq 17'
Mixer name : 'ATI R6xx HDMI'
Components : 'HDA:1002aa01,00aa0100,00100000'
Controls : 4
Simple ctrls : 1
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
!!Alsactl output
--startcollapse--
state.Intel {
control.1 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Front Playback Volume'
value.0 64
value.1 64
control.2 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Front Playback Switch'
value.0 true
value.1 true
control.3 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Headphone Playback Volume'
value.0 53
value.1 53
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Headphone Playback Switch'
value.0 true
value.1 true
control.5 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Mic Boost'
value.0 2
value.1 2
control.6 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Front Mic Boost'
value.0 2
value.1 2
control.7 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 2'
comment.dbmin 0
comment.dbmax 4000
iface MIXER
name 'Line In Boost'
value.0 0
value.1 0
control.8 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 31'
comment.dbmin -1650
comment.dbmax 3000
iface MIXER
name 'Capture Volume'
value.0 29
value.1 29
control.9 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
control.10 {
comment.access 'read write'
comment.type ENUMERATED
comment.count 1
comment.item.0 Mic
comment.item.1 'Front Mic'
comment.item.2 Line
comment.item.3 CD
iface MIXER
name 'Input Source'
value Mic
control.11 {
comment.access 'read write'
comment.type INTEGER
comment.count 2
comment.range '0 - 12'
comment.dbmin -2400
comment.dbmax 0
iface MIXER
name 'Beep Playback Volume'
value.0 0
value.1 0
control.12 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 2
iface MIXER
name 'Beep Playback Switch'
value.0 true
value.1 true
control.13 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.14 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.15 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.16 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
control.17 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Default PCM Playback Switch'
value true
control.18 {
comment.access 'read write'
comment.type INTEGER
comment.count 1
comment.range '0 - 64'
comment.dbmin -6400
comment.dbmax 0
iface MIXER
name 'Master Playback Volume'
value 64
control.19 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'Master Playback Switch'
value true
control.20 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 255'
comment.tlv '0000000100000008ffffec1400000014'
comment.dbmin -5100
comment.dbmax 0
iface MIXER
name 'PCM Playback Volume'
value.0 255
value.1 255
control.21 {
comment.access 'read write user'
comment.type INTEGER
comment.count 2
comment.range '0 - 120'
comment.tlv '0000000100000008fffff44800000032'
comment.dbmin -3000
comment.dbmax 3000
iface MIXER
name 'Digital Capture Volume'
value.0 0
value.1 0
state.HDMI {
control.1 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.2 {
comment.access read
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.3 {
comment.access 'read write'
comment.type IEC958
comment.count 1
iface MIXER
name 'IEC958 Playback Default'
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
control.4 {
comment.access 'read write'
comment.type BOOLEAN
comment.count 1
iface MIXER
name 'IEC958 Playback Switch'
value false
--endcollapse--
!!All Loaded Modules
Module
usbhid
hidp
hid
fuse
radeon
ttm
drm_kms_helper
drm
i2c_algo_bit
rfcomm
sco
bridge
stp
llc
bnep
l2cap
crc16
coretemp
ipv6
snd_seq_dummy
snd_seq_oss
btusb
joydev
snd_hda_codec_atihdmi
fan
snd_seq_midi_event
bluetooth
snd_hda_codec_realtek
arc4
ecb
snd_seq
snd_hda_intel
iwlagn
snd_seq_device
snd_hda_codec
sdhci_pci
iwlcore
snd_pcm_oss
uvcvideo
omnibook
videodev
snd_mixer_oss
snd_hwdep
pcmcia
tifm_sd
sdhci
snd_pcm
v4l1_compat
snd_timer
psmouse
mac80211
mmc_core
yenta_socket
vboxdrv
snd
cpufreq_powersave
i2c_i801
uhci_hcd
r8169
ehci_hcd
iTCO_wdt
intel_agp
tifm_7xx1
video
rsrc_nonstatic
soundcore
firewire_ohci
agpgart
mii
i2c_core
pcspkr
snd_page_alloc
pcmcia_core
iTCO_vendor_support
led_class
output
usbcore
tifm_core
serio_raw
cfg80211
evdev
cpufreq_conservative
battery
ac
firewire_core
rfkill
crc_itu_t
thermal
button
cpufreq_ondemand
sg
acpi_cpufreq
freq_table
processor
rtc_cmos
rtc_core
rtc_lib
ext3
jbd
mbcache
sr_mod
cdrom
ata_generic
sd_mod
ata_piix
pata_acpi
ahci
libata
scsi_mod
!!Sysfs Files
/sys/class/sound/hwC0D0/init_pin_configs:
0x12 0x411111f0
0x13 0x411111f0
0x14 0x99130110
0x15 0x0221101f
0x16 0x411111f0
0x18 0x02a11830
0x19 0x99a3093e
0x1a 0x411111f0
0x1c 0x411111f0
0x1d 0x4016852d
0x1e 0x411111f0
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D1/init_pin_configs:
/sys/class/sound/hwC0D1/driver_pin_configs:
/sys/class/sound/hwC0D1/user_pin_configs:
/sys/class/sound/hwC0D1/init_verbs:
/sys/class/sound/hwC1D0/init_pin_configs:
0x03 0x18560010
/sys/class/sound/hwC1D0/driver_pin_configs:
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
!!ALSA/HDA dmesg
pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
HDA Intel 0000:00:1b.0: setting latency timer to 64
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, 1.3.27ks
phy0: Selected rate control algorithm 'iwl-agn-rs'
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:01:00.1: setting latency timer to 64
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x82e0b1, caps: 0xb04711/0xe0440d
Bluetooth: L2CAP socket layer initialized
hda-intel: azx_get_response timeout, switching to polling mode: last cmd=0x018b0000
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
Bridge firewalling registered
Last edited by teMplaryum (2010-01-26 10:15:18)

Hi there!
I had the very same problem with the same soundcard and found this thread.
The problem got solved for me by adding the same line as you have to /etc/modprobe.d/modprobe.conf.
However, I also had to create /etc/modprobe.d/sound.conf and add:
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=toshiba power_save=0
Notice the difference on the "model=toshiba" part.
However, my laptop is not a Toshiba, but a Compal IFL90.
I remember that in Ubuntu I needed(a long time ago) to add a line to /etc/alsa.conf with model=toshiba. I figured it might be worth a try, and well, it did.
I hope this can help someone else.
As for the OP: "You have my thanks!"

Similar Messages

I have recently upgraded my iMac Intel G5 iSight to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old sys parts

I have recently upgraded my iMac Intel G5 iSight (iMac5,1) to OS 10.6.8 and now the internal mic does not work with skype or facebook. I can here static when playing back clips. Do I need to update firmware or reload old system parts. I have zapped PRAM. The blue indicator in system audio panel will appear for a second as I slide the bar for internal mic but then it disappears. Is there a fix?

The sound seems very faint but can here static on playback.

The T61 internal mic does not work when docked

The internal mic does not work when docked. However works fine when undocked.
Does anyone know how to fix this?

I go this issue very recently. What I did to solve the problem was probably mentioned before somwehre over the web.
First of all, I degraded Skype from the latest version to skype 6.1.0.129. Then I went in Skype - Tools - Option - Advanced Settings - Automatic Updates and click "Turn off automatic updates" and Save. I closed (Quit Skype) Skype then.
I clicked on Start (in toolbar) and in search area typed Device Meneger. Then in Sound Video and game controlers, highlite and right click on mouse on IDT High Definition Audio Codec and press Unistall. This will unistall IDT drivers from the system. You must restart your computer.
Once you come back after reboot, you must go again to the Sound Video and game controlers and remove the rest part of your driver. After reboot go Sound Video and game controlers and click "Scan for hardware changes" then system find your IDT Sound Card again. Please install the latest driver (6.10.6367.0) and reboot. After reboot you should have mic working while on Skype.

CIT200 Internal mic does not work??

I am using the CIT200 under WIndows 7. It connects fine to Skype and drivers are installed OK. When I call, the internal mic does not work (phone's internal speaker is fine), but when I plug in a headset, the headset mic (and speaker) works just fine. Does this mean the internal mic is physically damaged, or is there anything I can do software vise to get it to work?

Hmmm, well never tried to make the CIT200 software on a Virtual PC, but you can give a try and check if that solves your problem or not.

My mic does not work On my iPhone 5S when using FaceTime

The mic does not work when using the speaker either

Is Mute set?
On the left side of iPhone above the volume buttons. Red is mute.

After upgrading to Lion internal mic does not work with Facetime

After upgrading to Lion internal mic does not work with Facetime. The mic is picking up sound as noted in System Prefs. This was working just fine before the updgrade. Facetime works OK on my iPod.

you have in french a tutorial to recreate your partition here
Rebuild partition with Recovery HD lion after upgrade to 10.7.2
i tested, it's work !
For your wifi problem:
Try to change your setup of wifi, look this table given by apple:
I changed my wifi setup wep to wpa and it's work !

Window 10 build 10041 does not work with Intel 82579V Gigabit Ethernet on ASUS motherboard

I originally posted this question here:
answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_update/window-10-build-10041-does-not-work-with-intel/6729892f-83aa-4822-b20a-ea84f4fd06c7
and was asked to post it on this forum...
I updated a computer I have which is a quad core i7 that I built and includes an ASUS motherboard with Intel 82579V Gigabit Ethernet built in. Windows 10 preview 9926 worked fine with this network adapter. Window 10 build 10041 does not, and I have tried
it twice so far. I even went as far as buying a Thunderbolt-Gigabit Ethernet Adapter (Broadcom, sold by Apple)... and while it installed the driver automatically, it did not work either. Each time you try to view the properties of either of them, it locks
up or give an error. In fact, doing much of anything with the Intel adapter icon assures you of not being able to do a clean reboot... have to kill power. I have finally gone back the previous version 9926, which has its issues but no where near as bad
as not having any network connectivity! Does anyone have this issue and a workaround?
Note, there are two images on the windows 10 preview forum that I posted this question on. I could not post the full link as I was getting a message here that links and graphics are not allowed.

Thanks Roger, I posted the following yesterday in the other thread (thinking it was this thread - confusing after they moved it here)... It may be that the new driver fixes the issue that 10041 has with it, but I have not tried that yet. If I do I will update
this... Thanks!
I have more information about this, which basically exonerates any issue with the Intel 82579V Gigabit Ethernet hardware or software. I have 3 computers with Windows 10 preview so I have multiple angles to see issues from. With this I have found a culprit
(but I suspect not just the only culprit) in this above mentioned problem...
10041 build combined with installing (or attempting to install) CISCO VPN Windows 7 64bit 5.0.07.0440-k9 client causes the issue mentioned above. I confirmed this on a completely different machine with a totally different Ethernet adapter. First machine
is an ASUS motherboard in a tower system I built, with the Intel 82579V Gigabit Ethernet hardware built in. Second machine is a Gateway Laptop from 2008 which has a Marvell Yukon 88E8057 PCI-E Gigabit adapter built in. Build 10041 will work fine with my 2008
laptop, including the MS VPN client (which I have tested). However, if you attempt to install or even uninstall the Cisco client you will have to do a recovery to a restore point (as I have done twice) in order to get your network working again. Installing
or attempting to install (because it never even does install properly and times out), CISCO VPN client will render your entire network unusable. Going back to a restore point saved me and I am still running 10041 but I can't use CISCO VPN client any longer.
I could with build 9926, including on all 3 machines. I now have 9926 on two machines and 10041 on only the 2008 laptop.
Hopefully this above information helps someone resolve the issue. I will also mention, even though my network is working on the 2008 laptop, I still can't go into the Control Panel\Network and Internet\Network Connections and right mouse click on the Marvell
Yukon 88E8057 PCI-E Gigabit adapter icon. I get an error when clicking on Properties menu popup : "An unexpected error has occurred". So something is still up with my network adapter driver or windows software, but it could be a side effect of all
that has happened with the Cisco software install attempts under 10041.
Another note: CISCO Anyconnect also has the issue.

Bluetooth headset's mic does not work

I have NB205-312BL netbook and bought Acoustic Research ARWH1 bluetooth headset.
I am able to pair it with the netbook easily. However, the mic does not work! Only audio playback works. I know it is not the fault of the headset because the mic works pretty well with a cell phone.
When I look at Device's properties, I see that the device is identified as a 'headset' but an audio-sink device.
The mic does not work even if I explicitly select "Bluetooth Wave" as the sound/voice input device.
The netbook runs Windows XP. It has the latest Toshiba Bluetooth software 6.40.xx installed on it.
Any help is greatly appreciated. Thanks.

First you need to get your keyboard fixed. The caps lock appears to be stuck.
What have you tried, and what symptoms do you observe? "Does not work" does not tell us much.

My logitech mic does not work with Audition anymore

My Logitech mic does not work with Audition anymore. I had to reformat my hard drive and re install Audition, it is not working any more, I have test the mic with another software and it work fine. help please.

Fixed. Switched card into different slot, not sure exactly what made it work, but it does now.
Go ahead and delete thread if you like.

Hp pavillion dv4 windows7 mic does not work with google hangout.

Hi i have a hp pavillion dv4 1503tu laptop. when i connect an external headset it does not work when using google hangout. The same is the case with internal mic. I m able to hear the conversation but they are not able to hear me. works fine with skype. plz help

What brand and model of headset are you using?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Solved rEFInd does not work after update

Hello.
Today, I updated rEFInd with yaourt.
After the update, I copied the new files in /boot/efi.
I rebooted and now rEFInd does not work.
The only message I got is:
rEFInd - Initializing
After 2-3 minutes, the computer reboots and I got the same error message.
To boot, I had to use the UEFI shell.
First of all, is there a log file for rEFInd?
It is not easy at all to debug it when we don't have any error messages.
After that, I did the procedure to install rEFInd in /boot/efi twice without any success.
Do you know what to do to solve my problem?
Thanks for your help.
Last edited by antoyo (2012-11-07 23:29:55)

@antoyo: The old one is compiled using gnu-efi-libs, the new one is compiled using Tianocore UDK2010.
Full package: http://dl.dropbox.com/u/9710721/refind- … pkg.tar.xz
Src package: http://dl.dropbox.com/u/9710721/refind- … src.tar.gz (will compile only in x86_64 system)

Internal mic does not work !

I am trying to chat with friends on skype using my i5 MackBook Pro. The mic is not working since they can not hear me, I called the skype help and record my voice but it was not recorded. In the system preferences the level of the internal mic is showing a move while speaking, but it is not working
Any ideas guys?
Thanks

Hussainz wrote:
I am trying to chat with friends on skype using my i5 MackBook Pro. The mic is not working since they can not hear me, I called the skype help and record my voice but it was not recorded. In the system preferences the level of the internal mic is showing a move while speaking, but it is not working
Any ideas guys?
Thanks
You need to set it up in Skype preferences.

WebGL does not work on Windows 8 with NVidia (650M) cards

Hi, I`m working on WIndows8-64 and NVidia 650M GPU.
I use FF 17.0.1.
WebGL does not work until I set "webgl.force-enabled=true".
Can this be fixed to work by default ?
Thanks

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.

Upper speaker in my new iPhone 4 does not work properly. I hear strange sounds instead of speech. What to o?

Upper speaker in my new iPhone 4 does not work. When somebody calls me I hear only strange sounds. Please, help!

A couple of other things you can try -
With my 2010 Ford Fusion (and SYNC) I received the same not optimized message a few times. There were several things I had to do but eventually, I got it cleared up. Not sure exactly how this will translate to your Toyota but maybe it will.
- Try resetting the iPhone via a power off/on or a hard reset where you hold the home and power buttons. Then power back on and plug into your USB port.
- In my case I had an issue with SYNC in my car where I needed to reset the USB port in my car. Not sure if Toyota has something similar. The fact that you said it won't charge makes me wonder if the USB port got disabled in your car. This happened in my car and an easy reset for me was to remove a fuse for a few minutes and replace.
- Update your iPhone in iTunes and resync it there. Then try connecting again in yor car.
- Delete and re pair your iPhone from your Toyota system
Hope something here helps. Thanks

Mb sound not working. Can i add a sound card to work with PP cs6?

I have a sabertooth x58, pc, win 7. I lost the audio monitoring all of a sudden. Also tryed windows media player & all windows sounds are not being played as well. Tryed absolutely everything. Need to go to plan B.
Can i add a sound card to work with PP cs6?
http://www.newegg.com/Product/Product.aspx?Item=N82E16829132052

>Tryed absolutely everything
What does that mean?
Have you removed the sound card driver via control panel and let Win7 reinstall?

[SOLVED] Mic does not work on Intel ICH8 (rev 3) sound card

Similar Messages

Maybe you are looking for