[SOLVED] network-manager-applet not found

Hi, I'm quite noob here, and I'm trying to install network-manager-applet with no luck;
So far I've done
# pacman -S network-manager-applet
and I got
resolving dependencies...
looking for inter-conflicts...
Targets (1): network-manager-applet-0.8-1
Total Download Size: 1.01 MB
Total Installed Size: 4.35 MB
Proceed with installation? [Y/n] y
:: Retrieving packages from extra...
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from mi.mirror.garr.it : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from ftp.nluug.nl : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from ftp.hosteurope.de : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from ftp-stud.hs-esslingen.de : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from archlinux.puzzle.ch : Not Found
error: failed retrieving file 'network-manager-applet-0.8-1-x86_64.pkg.tar.gz' from ftp.surfnet.nl : Not Found
warning: failed to retrieve some files from extra
error: failed to commit transaction (Not Found)
Errors occurred, no packages were upgraded.
so I tried to download the package itself and install it with
pacman -U network-manager-applet-0.8-2-x86_64.pkg.tar.xz
and the answer was
loading package data...
checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: network-manager-applet: requires mobile-broadband-provider-info
what to do?
i cannot find in the repos the package mobile-broadband-provider-info
thank you in advance
Last edited by lsk (2010-03-10 10:15:21)

Update your system - "pacman -Syu". The clue is that the file you manually downloaded is different to the one pacman is trying to get.

Similar Messages

[SOLVED]Network Manager Applet and nmcli failing after GCC upgrade

Hi All,
So I went to update my system today and there were only like 8 or 9 updates. Like many other people I had an issue with gcc and pacman. To fix this I ran
pacman -S gcc
Then I ran:
pacman -Su
which updated pacman itself. On reboot though I noticed network manager applet was unable to find any of my network devices despite the fact that network manager was running and I had an IP address. I killed nm-applet and re-ran it and it spewed errors about not being able to connect to network manager. I tried running nmcli and it did the same thing. However, when I run nmcli as root it works. Looking at the arch wiki they suggest you be a part of the wheel and network group which I made sure I was. Everything was working up until I ran those two updates though. Anyone else have this happen or have any idea what is wrong?
Thanks,
Hemmar
EDIT: Never mind - a patch was released for consolekit which fixes the problem.
Last edited by hemmar (2012-04-13 00:36:49)

Hi guz46
I have already tried removing the ! and the same thing happened ... but I realised today that I was being automatically connected to "Auto eth0" despite there being no cable present. When automatic connection was disabled on "Auto eth0" my 3G connection (ppp0) connected fine.
Could you clarify that the preferred set-up in the /etc/rc.conf for the interfaces is without the !. The Wiki for networkmanager says to disable them, but then states that some may need to be reenabled with no explanation. The purpose of this confuses me!
Thanks for you help anyways,
Scott
EDIT:
I appear to have fixed my problem with the auto connection on the various interfaces by updating my /etc/rc.conf file to:
#Static IP example
#eth0="dhcp"
ppp0="dhcp"
wlan0="dhcp"
eth0="dhcp"
INTERFACES=(ppp0 wlan0 eth0)
Thus ensuring that I can connect in order of preference.
Last edited by ScottArch (2009-11-03 18:48:47)

[SOLVED] Network Manager Applet

One of the things I got used to from Ubuntu is the network manager applet, which allows managing connections with ease. As instructed in the Wiki, I tried installing it with the following commands:
pacman -S networkmanager
pacman -S network-manager-applet
And then launched it by typing
nm-applet
But this comes up in the terminal:
(nm-applet:1518): Gdk-CRITICAL **: gdk_visual_get_red_pixel_details: assertion `GDK_IS_VISUAL (visual)' failed
(nm-applet:1518): Gdk-CRITICAL **: gdk_visual_get_green_pixel_details: assertion `GDK_IS_VISUAL (visual)' failed
(nm-applet:1518): Gdk-CRITICAL **: gdk_visual_get_blue_pixel_details: assertion `GDK_IS_VISUAL (visual)' failed
** Message: applet now removed from the notification area
(nm-applet:1518): libnotify-WARNING **: Failed to connect to proxy
** (nm-applet:1518): WARNING **: get_all_cb: couldn't retrieve system settings properties: (25) Launch helper exited with unknown return code 1.
** (nm-applet:1518): WARNING **: fetch_connections_done: error fetching connections: (25) Launch helper exited with unknown return code 1.
** (nm-applet:1518): WARNING **: Failed to register as an agent: (25) Launch helper exited with unknown return code 1
** Message: applet now embedded in the notification area
** Message: applet now removed from the notification area
In the notification area the icon looked like it was going to show up, but it's removed immediately.
I'm not even sure if I can connect to a wireless connection without this, can I? I wouldn't mind using a different method for connecting to my wireless connection, just as long as it works and it automatically connects when I login. So if anyone has got a better idea, please share it with me. In the mean time, what would I need to do to fix this and have the network manager applet working?
Last edited by faviouz (2011-09-15 15:52:50)

faviouz wrote:
Thanks for the quick reply dodo3773!
It worked excellently! I also added networkmanager to the daemons array and it loads on boot now, which is great.
No problem. Glad to help. As karol said the wiki has many tips and tricks for almost anything that you need to get your system up and running. Make sure to read through the rest of the networkmanager one in regards to gnome-keyring, groups, etc.. Take care and welcome to Arch Linux Forums.

[xfce4] network-manager-applet not asking for Wifi password

I am running XFCE with the gnome network-manager-applet and kwallet as password storage and I do not want to use the gnome keyring because it is making many problems with my current setup.
There are multiple ways to store passwords in NetworkManager. To save them plain in the config files is not an option for me. So I can put them in a password store or hack them in every time I want to connect.
While the gnome network-manager-applet does not work with kwallet I accepted to do all the hackery every time.
Problem: I even can not hack in the passwords.
If I try to connect the connection is disconnected immediately. The logs say, that "The name org.freedesktop.secrets was not provided by any .service files".
Long story short:
- NetworkManager needs the dbus service "org.freedesktop.secrets" to read passwords (via password store or via prompt)
- kwallet does not announce "org.freedesktop.secrets" - this is done by the nm-plasma applet (which I can not run without hacking XFCE)
- gnome-keyring announces itself as a secret agent but does not work with my setup
Do I need to write my own secret agent which only shows a password prompt and parses the input to NM or is there any option/tool/patch/hack/miracle that I have missed to use kwallet with gnome network-manager-applet or to get a password prompt without installing gnome-keyring?
Thanks in advance
Last edited by frederik (2015-04-14 15:30:24)

add this to your start-up: gnome-keyring-daemon --components=gpg
Edit: and install gnome-keyring ofc
Last edited by MakeTheGOD (2015-04-28 05:24:33)

[SOLVED] Network Manager - Device not ready

Hey,
I can't use the wlan feature of networkmanager because its grayed out with "device not ready" written on it.
My wlan device is definitely enabled.
iwconfig:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
I use the
Intel Corporation WiFi Link 5100
thx 4 help
Last edited by GNA (2011-04-13 09:13:25)

ls -l /var/run/daemons:
total 0
-rw-r--r-- 1 root root 0 Apr 5 09:27 acpid
-rw-r--r-- 1 root root 0 Apr 5 09:27 crond
-rw-r--r-- 1 root root 0 Apr 5 09:27 dbus
-rw-r--r-- 1 root root 0 Apr 5 09:27 laptop-mode
-rw-r--r-- 1 root root 0 Apr 5 09:27 netfs
-rw-r--r-- 1 root root 0 Apr 5 09:27 networkmanager
-rw-r--r-- 1 root root 0 Apr 5 09:27 syslog-ng
groups:
lp wheel rfkill games network video audio optical storage scanner power
users networkmanager
I was originally not in the network and networkmanager group but tried adding myself in the course of reading your post, because I thought maybe that could be the reason, but it didn't change anything
I had to create the networkmanager group because it was not existent but https://wiki.archlinux.org/index.php/Groups#Groups says this group should exist.
Last edited by GNA (2011-04-05 14:00:08)

[SOLVED] Network Manager daemon not loading from rc.conf

Hi all,
I'm having a bit of trouble getting NetworkManager to load up on system start. Basically I put it in rc.conf like so...
DAEMONS=(syslog-ng !network netfs crond hal alsa dhcdbd NetworkManager @fam @openntpd)
During the startup it says it starts up successfully, but...
When I load up Gnome the nm-applet doesn't appear. If I try 'nm-tools' as root it tells me NetworkManager isn't loaded. So if I then load 'NetworkManager' as root on the command like then go back to Gnome with my user account, nm-applet appears.
Short of putting NetworkManager into every users' .xinitrc how can I get it to load on bootup?
Last edited by powerpleb (2008-08-06 01:27:17)

Thanks for the reply...
I checked out the command name:
[andrew@myhost ~]$ which NetworkManager
/usr/sbin/NetworkManager
[andrew@myhost ~]$ which networkmanager
which: no networkmanager in (/bin:/usr/bin:/sbin:/usr/sbin:/opt/java/jre/bin:/usr/bin/perlbin/site:/usr/bin/perlbin/vendor:/usr/bin/perlbin/core)
[andrew@myhost ~]$
So that's not the problem...
and I definitely added myself to the network group because before that nm-applet wouldn't work at all. Anyway, I just double checked and yes I am in the network group.
Last edited by powerpleb (2008-08-05 12:58:24)

Network-manager-applet not showing up in gnome-panel

I've installed it, but it doesn't show up in the list of things to add to the panel. Adding the "notification area" item doesn't do it either. What am I stupidly forgetting?

Um...ps -e | grep "nm" returns this:
1678 ? 00:00:00 nm-applet
1730 ? 00:00:00 nm-system-setti
Is there something other than those two that should be running? How would I check?

Error:The network path was not found after shifting the development to a new machine

I hope I will find the solution here.
I'm developing my own content management system and I used the concept of URL Routing in ASP.NET and everything works just fine until I shifted developing my website from a desktop to a laptop. The problem happens only with the pages related to URL
Routing. Can anyone kindly guide me to solve this problem?
This is the full error stack:
Server Error in '/' Application.
The network path was not found
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The network path was not found
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The network path was not found]
[SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5294791
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +558
System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover) +5307271
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +145
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +889
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +307
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions) +434
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +225
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +37
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnectionOptions userOptions) +558
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnectionOptions userOptions) +67
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1052
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +167
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +143
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +83
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +316
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +86
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +3387
System.Web.UI.WebControls.BaseDataList.GetData() +91
System.Web.UI.WebControls.DataList.CreateControlHierarchy(Boolean useDataSource) +488
System.Web.UI.WebControls.BaseDataList.OnDataBinding(EventArgs e) +97
System.Web.UI.WebControls.BaseDataList.DataBind() +131
System.Web.UI.WebControls.BaseDataList.EnsureDataBound() +97
System.Web.UI.WebControls.BaseDataList.CreateChildControls() +123
System.Web.UI.Control.EnsureChildControls() +171
System.Web.UI.Control.PreRenderRecursiveInternal() +138
System.Web.UI.Control.PreRenderRecursiveInternal() +337
System.Web.UI.Control.PreRenderRecursiveInternal() +337
System.Web.UI.Control.PreRenderRecursiveInternal() +337
System.Web.UI.Control.PreRenderRecursiveInternal() +337
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +5049

From logs found below issue, it seems remote connections are not allowed:
[SqlException (0x80131904): A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured
to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)]
Check the below links to trouble shoot this
http://blog.sqlauthority.com/2009/05/21/sql-server-fix-error-provider-named-pipes-provider-error-40-could-not-open-a-connection-to-sql-server-microsoft-sql-server-error/
http://forums.asp.net/t/1454592.aspx
Please click the Mark as answer button and vote as helpful if this reply solves your problem

Network Manager Applet Cannot Edit Options/Connections As Normal User

Today I installed Network Manager, and Network Manager Applet in XFCE as a normal user. I followed the instructions on the Arch Network Manager Wiki to the best of my knowlage. The NM-Applet connects to my ethernet, and everything is fine. Untill that is, when I right click the NM Applet.
Once right clicked as a normal user, 'Enable Networking', and 'Enable Wireless' are greyed out and unselectable. Also, when I right click the applet and select 'Edit Connections' 90% of the clickable options are greyed out, including the options to 'Edit' or 'Delete' connections. The only clickable option not greyed out is 'Add' button.
Clicking Add brings up the 'Add New Connection Window', but again everything is greyed out. 'Available To All Users' is checked, but is greyed out also. But, starting XFCE as root, allows me to use the NM Applet with no restrictions, AKA none of the greyed out options. Everything works fine.This is my second day using Arch, so I am not sure where to go now.
It also may be of help ito say I haven't gotten a display manager, such as lightdm or gdm.
My guess is that root is listed under a group the 'jesse' isn't. Or maybe it has something to do with PolicyKit. I'm not sure. If someone could give me a set of clear instructions on how to fix this annoyance, it would be greatly appreciated. Thank You.
My Current Normal User Groups wrote: disk lp wheel uucp games network video audio optical storage scanner power users
My /etc/hosts file wrote:
# /etc/hosts: static lookup table for host names
#<ip-address> <hostname.domain.org> <hostname>
127.0.0.1 localhost.localdomain localhost jesse
::1 localhost.localdomain localhost jesse
# End of file
My /etc/rc.conf wrote:
# /etc/rc.conf - configuration file for initscripts
# Most of rc.conf has been replaced by various other configuration
# files. See archlinux(7) for details.
# For more details on rc.conf see rc.conf(5).
DAEMONS=(alsa dbus syslog-ng crond ifplugd networkmanager bluetooth avahi-daemon acahi-dnsconfd avahi-dnsconfd fa$
# Storage
# USEDMRAID="no"
# USELVM="no"
# Network
# interface=eth0
# address=
# netmask=
# gateway=
My /etc/polkit-1/localauthority/50-local.d/org.freedesktop.NetworkManager.pkla wrote:Identity=unix-group:network
Action=org.freedesktop.NetworkManager.*
ResultAny=yes
ResultInactive=no
ResultActive=yes
Last edited by TriforceLZG (2012-09-02 13:43:23)

I found the solution, I had to install a Display Manager. Now everything is fine.

Network-manager-applet cannot run!!!!!!!!!!

Installed networkmanager and network-manager-applet, but I found it could not startup at boot time.....
When I run nm-applet in terminal as normal user, it print:
[yin@q ~]$ nm-applet
** (nm-applet:2168): WARNING **: <WARN> request_name(): Could not acquire the NetworkManagerUserSettings service.
Error: (9) Connection ":1.39" is not allowed to own the service "org.freedesktop.NetworkManagerUserSettings" due to security policies in the configuration file
When I run "sudo nm-applet", noting was wrong ,and the icon appeared in the panel right top.
Another question:
What's the difference between daemons in rc.conf and startup applications in gnome ?
I add "networknamager" in daemons line in rc.conf ,but I found there is a network manager entry in startup applications in gnome with the command : nm-applet --sm-disable. Does they conflict ??
Last edited by iamybj (2010-03-27 12:52:56)

iamybj wrote:
ngoonee wrote:You did not search the forums. Please do so before asking a question.
I think if the question was resolved, it should be updated to the wiki....
I find the wiki updating is very slow right now.
You misunderstand how this community works.
Users update the wiki, voluntarily. If you find a solution and feel its a common enough problem to post on the wiki, please do so.
Also, if you can't even bother to do a forum search or google search before asking questions, this may not be the right distro for you. Please read http://wiki.archlinux.org/index.php/FAQ … se_Arch.3F, especially the 'do-it-yourself' part.

Updating hybrid configuration failed - Kerberos authentication: The network path was not found

I'm configuring Exchange 2010 SP3 as a Hybrid server with Exchange Online. This is a single server running Exchange roles Mailbox, Client Access, Unified Messaging and Hub Transport.
When I run the Manage Hybrid Configuration, I receive the following error:
Updating hybrid configuration failed with error
'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occurred while using Kerberos authentication: The network
path was not found.
The full text from the Hybrid Configuration log file (C:\Program Files\Microsoft\Exchange Server\V14\Logging\Update-HybridConfiguration)
[1/5/2014 21:21:1] INFO:Opening runspace to
http://[servername]/powershell?serializationLevel=Full
[1/5/2014 21:21:1] INFO:Disconnected from On-Premises session
[1/5/2014 21:21:1] ERROR:Updating hybrid configuration failed with error 'System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server failed with the following error message : WinRM cannot process the request. The following
error occured while using Kerberos authentication: The network path was not found.
Possible causes are:
-The user name or password specified are invalid.
-Kerberos is used when no authentication method and no user name are specified.
-Kerberos accepts domain user names, but not local user names.
-The Service Principal Name (SPN) for the remote computer name and port does not exist.
-The client and remote computers are in different domains and there is no trust between the two domains.
After checking for the above issues, try the following:
-Check the Event Viewer for events related to authentication.
-Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
Note that computers in the TrustedHosts list might not be authenticated.
   -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
   at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
   at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOpen(IAsyncResult asyncResult)
   at System.Management.Automation.Runspaces.RunspacePool.Open()
   at System.Management.Automation.RemoteRunspace.Open()
   at Microsoft.Exchange.Management.Hybrid.RemotePowershellSession.Connect(PSCredential credentials, CultureInfo sessionUiCulture)
   at Microsoft.Exchange.Management.Hybrid.Engine.Execute(ILogger logger, String onPremPowershellHost, PSCredential onPremCredentials, PSCredential tenantCredentials, HybridConfiguration hybridConfiguration)
   at Microsoft.Exchange.Management.SystemConfigurationTasks.UpdateHybridConfiguration.InternalProcessRecord()'.
I have sought help, posting on the forum at community.office365.com -
http://community.office365.com/en-us/forums/158/t/212265.aspx. But I've got to a point where I believe the problem is more to do with how PowerShell is operating on the on-prem Exchange server.
Has anyone else come across this problem running the Hybrid Configuration Wizard?

Hello Darrell,
Have you verified the settings of Powershell virtual directories for the on-premises Exchange Servers? The following article has a list of some common issues with that virtual directory and how to correct them:
http://technet.microsoft.com/en-us/library/ff607221(v=exchg.80).aspxI would take a look at the one titled "Configure Kerberos Authentication" specifically to ensure everything
looks good.
As the article states you can run the Exchange BPA and it will check if any of these exist as well.

SCOM agent install fails Error 80070035 - the network path was not found

I have deployed SCOM 2012 agents to most servers (2008, 2008 R2, 2012, 2012R2) in our estate but some either fail to install or are not monitored. I assume the two problems are related, but for now I am concentrating on the servers that fail completely.
Installation is from the Discovery Wizard and I have about 20 servers that fail of various server versions.
So looking at one specific server that is failing to install the agent - a 2008 standard service pack 2
The firewall in on and file and printer sharing is enabled for domain, remote administration is enabled for domain
I added a specific rule to allow TCP 5723 and 5724
DCOM is enabled
I can Ping the target server from the SCOM server by both name and FQDN - both return the same IP and our DNS server has only one entry for this server
I can browse to the admin share \\server\C$ from the SCOM Server, using the same account that I specify for the agent install that is a domain admin with rights on this server (and on the other servers the agent
did install to) and the server has plenty of disk space available
I am not sure what else to look at so would welcome any ideas
Thanks

Hi Petro,
I have a Agent installation failure cheat sheet, For your error 80070035 it is said to perform a manual installation.
So i would like to understand which version of SCOM is this ? 2007 R2 or 2012 or 2012 r2 ?
Also check if your agents have the WMI service started and enabled ?
Also if yours is a SCOM 2007 R2 do you have a RMS & MS in your management group ? If yes then Pushing the agent installation from MS may cause such issue. So would suggest you push the installation from RMS.
Also check if your Network connectivity meets the minimum requirement as recommended by SCOM. Below is applicable for Both SCOM 2007 R2 & SCOM 2012 & 2012 R2.
Component A
Component B
Minimum Requirement
Root management server or management server
Agent
64 Kbps
Root management server or management server
Agentless
1024 Kbps
Root management server or management server
Database
256 Kbps
Also check if you have any Anti virus / Firewall which is blocking the install / communication. If yes disabe or add the "Monitoringhost.exe to the safe list or what your feature is.
Check if you have another IP assigned to the NIC card and remove it tempraurly andchecl.
Also post the event logs of the Agents which are in not monitored state for analysis.
SCOM Agent installation failure error codes
Error
Error Code(s)
Remediation Steps
The MOM Server could not execute WMI Query "Select * from Win32_Environment where
NAME='PROCESSOR_ARCHITECTURE'" on computer server.domain.com
Operation: Agent Install
Install account: domain\account
Error Code: 80004005
Error Description: Unspecified error
80004005
1. Check the PATH environment variable. If the PATH statement is very long, due to lots of installed third party software - this can
fail. Reduce the path by converting any long filename destinations to 8.3, and remove any path statements that are not necessary.
2. The cause
could be corrupted Performance Counters on the target Agent.
To rebuild all Performance counters including extensible and third party counters in Windows Server 2003, type the following commands at a command
prompt. Press ENTER after each command.
cd
\windows\system32
lodctr /R
Note /R is uppercase.
Windows Server 2003 rebuilds all the counters because it reads all the .ini files in the C:\Windows\inf\009 folder for the English operating system.
How to manually rebuild Performance Counter Library values
http://support.microsoft.com/kb/300956
3. Manual agent install.
The MOM Server could not execute WMI Query "Select * from Win32_OperatingSystem" on
computer “servername.domain.com”
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
8004100A
800706BA
1. Ensure agent push account has local admin rights
2. Firewall is blocking NetBIOS access
3. Inspect WMI health and rebuild repository if necessary
4. Firewall is blocking ICMP (Live OneCare)
5. DNS incorrect
The MOM Server failed to open service control manager on computer "servername.domain.com". Access is Denied
Operation: Agent Install
Install account: DomainName\User Account
Error Code: 80070005
Error Description: Access is denied.
80070005
80041002
1. Verify SCOM agent push account is in Local Administrators group on target computer.
2. On Domain controllers will have to work with AD team to install agent manually if agent push account is not a domain admin.
Disable McAfee antivirus during push
The MOM Server failed to open service control manager on computer "servername.domain.com".
Therefore, the MOM Server cannot complete configuration of agent on the computer.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 800706BA
Error Description: The RPC server is unavailable.
800706BA
1. Firewall blocking NetBIOS ports
2. DNS resolution issue. Make sure the agent can ping the MS by NetBIOS and FQDN. Make sure the MS can ping the agent by NetBIOS
and FQDN
3. Firewall blocking ICMP
4. RPC services stopped.
The MOM Server failed to acquire lock to remote computer servername.domain.com. This means there is already an agent management operation proceeding
on this computer, please retry the Push Agent operation after some time.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: 80072971
Error description: Unknown error 0x80072971
80072971
This problem occurs if the LockFileTime.txt file is located in the following folder on the remote computer:
%windir%\422C3AB1-32E0-4411-BF66-A84FEEFCC8E2
When you install or remove a management agent, the Operations Manager 2007 management server copies temporary files to the remote computer. One
of these files is named LockFileTime.txt. This lock file is intended to prevent another management server from performing a management agent installation at the same time as the current installation. If the management agent installation is unsuccessful and
if the management server loses connectivity with the remote computer, the temporary files may not be removed. Therefore, the LockFileTime.txt may remain in the folder on the remote computer. When the management server next tries to perform an agent installation,
the management server detects the lock file. Therefore, the management agent installation is unsuccessful.
http://support.microsoft.com/kb/934760/en-us
The MOM Server detected that the following services on computer "(null);NetLogon" are not running. These services are required for push
agent installation. To complete this operation, either start the required services on the computer or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Remote Computer Name: servername.domain.com Install account: DOMAIN\account
Error Code: C000296E
Error Description: Unknown error 0xC000296E
C000296E
1. Netlogon service is not running. It must be set to auto/started
The MOM Server detected that the following services on computer
"winmgmt;(null)" are not running
C000296E
1. WMI services not running or WMI corrupt
The MOM Server detected that the Windows Installer service (MSIServer) is disabled on computer "servername.domain.com". This service is
required for push agent installation. To complete this operation on the computer, either set the MSIServer startup type to "Manual" or "Automatic", or install the MOM agent manually by using MOMAgent.msi located on the product CD.
Operation: Agent Install
Install account: DOMAIN\account
Error Code: C0002976
Error Description: Unknown error 0xC0002976
C0002976
1. Windows Installer service is not running or set to disabled – set this to manual or auto and start it.
The Agent Management Operation Agent Install failed for remote computer servername.domain.com.
Install account: DOMAIN\account
Error Code: 80070643
Error Description: Fatal error during installation.
Microsoft Installer Error Description:
For more information, see Windows Installer log file "C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameAgentInstall.LOG
C:\Program Files\System Center Operations Manager 2007\AgentManagement\AgentLogs\servernameMOMAgentMgmt.log" on the Management Server.
80070643
1. Enable the automatic Updates service…. Install the agent – then disable the auto-updates service if desired.
Call was canceled by the message filter
80010002
Install latest SP and retry. One server that failed did not have Service pack installed
The MOM Server could not find directory \\I.P.\C$\WINDOWS\. Agent will not be installed on computer "name". Please verify the required
share exists.
80070006
1. Manual agent install
Possible locking on registry?
http://www.sysadmintales.com/category/operations-manager/
Try manual install.
Verified share does not exist.
The network path was not found.
80070035
1. Manual agent install
The Agent Management Operation Agent Install failed for remote computer "name". There is not enough space on the disk.
80070070
1. Free space on install disk
The MOM Server failed to perform specified operation on computer "name". The semaphore timeout period has expired.
80070079
NSlookup failed on server. Possible DNS resolution issue.
Try adding dnsname to dnssuffix search list.
The MOM Server could not start the MOMAgentInstaller service on computer "name" in the time.
8007041D
80070102
NSlookup failed on server. Possible DNS resolution issue.
Verify domain is in suffix search list on management servers.
The Agent Management Operation Agent Install failed for remote computer "name"
80070643
1. Ensure automatic updates service is started
2. Rebuild WMI repository
3. DNS resolution issue
The Agent Management Operation Agent Install failed for remote computer "name". Another installation is already in progress.
80070652
Verify not in pending management. If yes, remove and then attempt installation again.
The MOM Server detected that computer "name" has an unsupported operating system or service pack version
80072977
Install latest SP and verify you are installing to Windows system.
Not discovered
Agent machine is not a member of domain
Ping fails
1. Server is down
2. Server is blocked by firewall
3. DNS resolving to wrong IP.
Fail to resolve machine
1. DNS issue
The MOM Server failed to perform specified operation on computer "name". Not enough server storage…
8007046A
1. This is typically a memory error caused by the remote OS that the agent is being installed on.
There are currently no logon servers available to service the logon request.
8007051F
1. Possible DNS issue
This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version
of the Windows Installer service.
8007064D
1. Install Windows Installer 3.1
The network address is invalid
800706AB
Possible DNS name resolution issue.
Tried nslookup on server name and did not get response.
Verify domain is in suffix search list on management servers.
The MOM Server failed to perform specified operation on computer servername.domain.com
80070040
1. Ensure agent push account has local admin rights
The MOM Server detected that the actual NetBIOS name SERVERNAME is not same as the given NetBIOS name provide for remote computer SERVERNAME.domain.com.
80072979
1. Correct DNS/WINS issue.
2. Try pushing to NetBIOS name
Gautam.75801

After start-up "The network path was not found."

Hi Folks,
I have a Synology DS214se. I am running Windows 8.1, every time I start up I get the error:
An error occurred while reconnecting Y: to \\SERVER\home
Microsoft Windows Network: The network path was not found.
This connection has not been restored.
When I go into File Explorer 20-30 seconds after reaching the desktop, I have no problem accessing the NAS, including via the Y: drive.
My PC uses the NAS for it's Windows home directories, e.g. Documents, Downloads, Desktop, etc. I wonder if it has something to do with the speed/order at
which it connects on start up. The result is I never can see my desktop unless I click on it and push F5. I have similar issues when my PC awakes from sleep.
Is their some way to force windows to connect or set up my Y: drive before doing other things?
Thank you,
Delzrock

Hi Delzrock,
Would you please let us know current situation of this issue? Just check if above suggestion can help you to solve this issue. If any update, please feel free to let us know.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

The Network Path was not Found - Server 2008

I am managing a Windows Server 2008. When I go into the Group Policy Management Council and attempt to edit, or add group policy it comes up with an error "Failed to open Group Policy [...] The Network Path was not found." I am new to using Windows Servers and quite confused as to the problem.

Hi,
This problem may be related to network access. I list some common factors and corresponding troubleshooting steps as below. Please check them one by one and let me know the result.
1> DNS issue
From the problematic PC, please run the following commands and then check if the issue still exists:
1) Can you ping FQDN of the DCs in your networks?
2) Can you ping IP of all the DCs in your networks?
3) Does the DNS configuration point to the correct DNS server?
2.
1). Start -> run -> cmd
2) Type nslookup, and then press Enter; Type set type=all, and then press Enter.
3) Type _ldap._tcp.dc._msdcs.<yourdomainname>, and then press Enter to check the result.
If SRV records could not be resolved successfully, please type 'net stop netlogon' and 'net start netlogon' to regenerate SRV records.
2>. Permission
Ensure you logon DC using the user with domain administrator privilege. If so, please check if you have the proper permission on sysvol files under %systemroot% and inf file under %system root%
3>. PDC is not available.
By default, Group policy object editor connects PDC role to enumerate GP settings. Please
refer to the following article to confirm which DC is PDC role:
How to view and transfer FSMO roles in Windows Server 2003
http://support.microsoft.com/kb/324801
How to view and transfer FSMO roles in the graphical user interface
http://support.microsoft.com/kb/255690
After locating the PDC role, please logon it and see if sysvol file under %systemroot%\SYSVOL\ has been properly shared and has the correct structure.
If not, you can refer to the following KB to rebuilt Sysvol tree.
How to rebuild the SYSVOL tree and its content in a domain
http://support.microsoft.com/kb/315457/
4> We can control which DC is preferable DC that Group policy object editor connects by default via GP, which is User configuration\ administrative template\system\group policy\domain controller selection. Also, please enable it as 'Use any available Domain controller' and run 'gpupdate \force' to test the result.
If this issue still continue, please post back.

[SOLVED] Network Manager confusion on reading WiKi

I have installed KDE DE...I am unable to start the network through NM...
On going thru Arch Wiki , https://wiki.archlinux.org/index.php/NetworkManager
I understand that there are 2 NMs available..One is for GNOME but works in all DE (backend), Other is "Knetworkmanager" which is for KDE.(backend)...
The frontend GUI is Gnome- applet and KDEplasme-applet
It is stated under KDE 3.5 , that Knetworkmanager is not supported but available in AUR...
My doubt is as follows
1. What should I install for KDE backend? --- Gnome Networkmanager or Knetworkmanager (Is the version for 4.4 & above supported?, wiki is silent on this)?
2. For Frontend should I install the Plasma widget or the GNOME applet?
3. If backend is GNOME network manager will it work with KDE plasma widget (front end) ?
4. In /etc/rc.conf , in "DAEMONS = " should I give "knetworkmanager" or "networkmanager" If I install the KDE version?
I had installed WIcd to test my settings...It was working initially after typing
modprobe b43 <for bcm chipset>
/etc/rc.d/network start
/etc/rc.d/dbus restart
/etc/rc.d/wicd start
ifconfig wlan0 up
dhcpcd wlan0
wicd-curses
Then I typed the network pwd and booted my interface.
i wanted to go in for network manager as it would save me the typing time..(Currently I installed pacman -S networkmanager (GNOME version) and KDE plasma "the one with the icon similar to "m")But on selecting the interface it goes thru Activating Interface and then says "Network Connection failed"
Now I am also not able to get wicd up
Any pointers?
EDIT ---The title says Graphical Front end managers, So I guess there is only one backend....In that case , why is my Network not working??All the wireless are detected ,so there is no problem with firmware....I have also enabled dhcpc (automatic)...So it shld fetch an IP address....dunno what the problem is..
Last edited by vikrang (2011-04-29 10:11:02)

vikrang wrote:1. What should I install for KDE backend? --- Gnome Networkmanager or Knetworkmanager (Is the version for 4.4 & above supported?, wiki is silent on this)?
2. For Frontend should I install the Plasma widget or the GNOME applet?
3. If backend is GNOME network manager will it work with KDE plasma widget (front end) ?
4. In /etc/rc.conf , in "DAEMONS = " should I give "knetworkmanager" or "networkmanager" If I install the KDE version?
1. there is just one, networkmanager. network-manager-applet and kdeplasma-applets-networkmanagement are just front-ends to networkmanager.
2. https://wiki.archlinux.org/index.php/Ne … nager#KDE4 , but https://wiki.archlinux.org/index.php/Ne … ager#GNOME will work too. I use network-manager-applet on KDE 'cause the KDE front-end can't set a system connection.
3. I won't even bother to answer to this.
4. networkmanager!!!
vikrang wrote:I have also enabled dhcpc (automatic)...So it shld fetch an IP address....dunno what the problem is..
if you are using networkmanager you must the networkmanager daemon, not network. replace network with networkmanager in rc.conf in DAEMONS array.
Last edited by JokerBoy (2011-04-27 08:59:42)

[SOLVED] network-manager-applet not found

Similar Messages

Maybe you are looking for