[solved] Removing the "tab" from Fluxbox windows
How would I remove these little tabs from Fluxbox?
Last edited by synthead (2008-01-12 21:16:32)
fluxbox wiki wrote:To configure them just right click your your desktop to get the root menu, then scroll down to Fluxbox Menu -> configure -> tab options. If you want them off select tabs in titlebar and they will act like the tabs in the .9.x releases.
Similar Messages
-
Removal of TABS from File Upload
Hi all,
I made an upload of a local file with TAB spaces in an internal table .I am required to remove the TABs from the records.I tried to used command REPLACE '/h' by single space, where '/h' being the TAB , but it did not work.
How can I achieve the requirement?
Your ideas are appreciated
Thanks,
stockfirst you wil call GUI_UPLOAD in normal way.
<b>if you are in UNICODE system,</b>
CLASS CL_ABAP_CHAR_UTILITIES DEFINITION LOAD.
CONSTANTS: X_DELIM TYPE C VALUE CL_ABAP_CHAR_UTILITIES=>HORIZONTAL_TAB.
this X_DELIM is to store HORIZANTAL TAB value.
<b>if you are in a NON UNICODE SYSTEM,</b>
you can use,
data X_DELIM type x value '09'.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = V_FNAME
FILETYPE = 'ASC'
TABLES
DATA_TAB = IT_READFILE
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
EXIT.
ENDIF.
*--Delete any Empty lines in the input file,if any
DELETE IT_READFILE WHERE LINE IS INITIAL.
LOOP AT IT_READFILE INTO X_READFILE.
SPLIT X_READFILE-LINE AT X_DELIM
INTO X_INPUTFILE-F1
X_INPUTFILE-F2
X_INPUTFILE-F3.
APPEND X_INPUTFILE TO IT_INPUTFILE.
CLEAR X_INPUTFILE.
ENDLOOP.
HERE IT_INPUTFILE IS the internal table with your fields.
IT_READFILE IS a character type internal table
data : BEGIN OF IT_READFILE occurs 0,
LINE(1000) TYPE C,
END OF IT_READFILE.
or you can put HAS_FIELD_SEPERATOR = 'X' in calling the above function module.
Regards
Srikanth
Message was edited by: Srikanth Kidambi -
How to remove the frame from an ActiveX Web Browser window
I'm using a web browser window to display content from a web application in my LV front panel. I'd really like the content to appear as native parts of the front panel rather than being inside a frame. Is there a method that will allow me to hide or remove the frame from the ActiveX control? I've tried to make it a custom control and edit the decoration out but that does not seem to work.
Solved!
Go to Solution.Quite right, in my 8.2 the web browser is already borderless (probably transparent). If your web browser window doesn't look good you should be able to insert it into the activeX one, the other should be a special case.
/Y
LabVIEW 8.2 - 2014
"Only dead fish swim downstream" - "My life for Kudos!" - "Dumb people repeat old mistakes - smart ones create new ones."
G# - Free award winning reference based OOP for LV -
I have to manually close the extra windows and restore the tabs from the previous session, and reopen the sidebar. In disgust I uninstalled Firefox 4 and reinstalled 3.6. Everything works fine in 3.6. Looks to me like Firefox 4 has many major bugs and is not yet ready for prime time. I'll stay with 3.6 for now.
This can be a problem with the files [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
Delete [http://kb.mozillazine.org/sessionstore.js sessionstore.js] and sessionstore.bak in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder]
* Help > Troubleshooting Information > Profile Directory: Open Containing Folder
If you see files sessionstore-##.js with a number in the left part of the name like sessionstore-1.js then delete those as well.<br />
You will have to redo App Tabs and Tab Groups after deleting sessionstore.js.
See:
* http://kb.mozillazine.org/Session_Restore -
Moving tabs from one window to another makes the new window vanish. I have hot corners enabled so when I move up to the right corner of my display I can see all my open windows but when I click on the tab that I moved to make it its own window it vanishes
I came up with an alternative solution.
Instead of actually trying to move the JInternalFrame from one JDesktopPane to another, I added a single, maximized JInternalFrame to the left side. When one of the right side frames is to be docked, I merely copy its ContentPane to the single JInternalFrame on the left, set the original to be non-visible, and adjust the properties of the JSplitPane to make the "docked" frame appear.
When the "close" button on the docked frame is pressed, I simply undo this procedure to "undock" the frame and redisplay it on the right-hand side (with its content intact from the docked frame, but in its original position). -
Hi,
I need VB script which to checks the perticular user in AD and if it exists;that user needs to be removed from the member of perticular group
Ex:- Lets say
I have a user 783562 , I need to search this user in AD to verify user exists or not. If not then I no need to remove the mebership from perticular group
Second scenario:-
If user exists then I need to remove the user membership from the perticular group.I want to do it in automation
Manual Path:-
1.Type dsa.msc in run command of IT session(we using it to connect remote desktop).
2. Select the domain & right click (EX:-corp.ds.xxyyzz.com) and select "Find" to find the user form the domain.
3. Type the user name in the Name field and click on "Find Now" button user name will be displayed in search result.
4. Double click on this user ID and select "Member Of" tab.
5. Select any member of group from the Name section then click on "Remove" button.
6. Finally click on "Apply" and "OK" button.
Kindly help me out to do this by using vb script.
Thanks
RajaUsage: CScript NameOfVBS.vbs //NOLOGO /User:Jane.Doe /GroupDN:CN=Group1,DC=Contoso,DC=com
Option Explicit
On Error Resume Next
Dim str_User
Dim str_GroupDN
Dim obj_Connection
Dim obj_Command
Dim obj_RootDSE
Dim str_DNSDomain
Dim str_Base
Dim str_Filter
Dim str_Attributes
Dim str_Query
Dim obj_RecordSet
Dim obj_Group
Dim str_ADsPath
Dim obj_User
str_User = WScript.Arguments.Named("User")
str_GroupDN = WScript.Arguments.Named("GroupDN")
If Len(Trim(str_User)) > 0 And Len(Trim(str_GroupDN)) > 0 Then
Set obj_Connection = CreateObject("ADODB.Connection")
Set obj_Command = CreateObject("ADODB.Command")
obj_Connection.Provider = "ADsDSOOBject"
obj_Connection.Open "Active Directory Provider"
Set obj_Command.ActiveConnection = obj_Connection
Set obj_RootDSE = GetObject("LDAP://RootDSE")
str_DNSDomain = obj_RootDSE.Get("defaultNamingContext")
str_Base = "<LDAP://" & str_DNSDomain & ">"
str_Filter = "(&(objectCategory=person)(sAMAccountName=" & str_User & "))"
str_Attributes = "cn,ADsPath"
str_Query = str_Base & ";" & str_Filter & ";" & str_Attributes & ";subtree"
obj_Command.CommandText = str_Query
obj_Command.Properties("Page Size") = 1000
obj_Command.Properties("Timeout") = 1
obj_Command.Properties("Cache Results") = False
Set obj_RecordSet = obj_Command.Execute
obj_RecordSet.MoveFirst
If obj_RecordSet.RecordCount = 0 Then
WScript.Echo str_User & " was not found"
Else
Set obj_Group = GetObject("LDAP://" & str_GroupDN)
str_ADsPath = obj_RecordSet.Fields("ADsPath")
Set obj_User = GetObject(str_ADsPath)
obj_Group.Remove(obj_User.AdsPath)
If Err.Number = 0 Then
WScript.Echo str_User & " was removed from group " & str_GroupDN
ElseIf Err.Number = -2147016651 Then
WScript.Echo str_User & " not a member of group " & str_GroupDN
Else
WScript.Echo str_User & " error removing from group " & str_GroupDN
End If
End If
End If -
What will happen to the organization of library if I removed the songs from windows explorer?
Background: I found it easier to identify duplicated songs in windows explorer as the songs will be renamed .... 1.mp3, thus enabling me to remove the duplicated songs; unlike in iTunes where I know the trick of showing duplicate songs, but you don't know which one is the one with 1 at the end of the file name.
Will iTunes automatically update the library without all the deleted songs, or will it indicate 'missing location' songs? Any fast ways to clear this 'missing location' songs by highlighting them all and delete all at one go?
Thanks.One way is to use iTunes Folder Watch with its option to check for dead tracks on start up.
Another option is with a set of Lost & Found playlists.
Lost & Found
Create a playlist called Found, select everything in Music and drag it into the Found playlist. Create a smart playlist called Lost matching All the rules Playlist is Music and Playlist is not Found. Your lost tracks will be in this playlist. You can delete them all with a Ctrl-A to select them and Shift-Delete to remove them.
You can then delete the Lost & Found playlists.
tt2 -
Can I set up a new window to open without all the tabs from the current window opwning?
I have a new computer at work with what must be a new version of firefox. I use multiple windows to do my job. When I open a new window, all the tabs from the current window open in the new one. I am wondering how to configure a new window to open with either a blank page or just my homepage?
I restarted Firefox and changed the homepage settings a to a different choice and back to the desired page then restarted Firefox again. This eliminated all the initial tabs from opening from opening in the new window. I am not sure how all the pages were cached or what I should have done but I no longer have this issue.
-
So I've created a Software Update Group and I did NOT want anything in there dealing with Internet Explorer 11 since the organization is currently stuck at using 10 as the highest. So I made sure that Internet Explorer was NOT in the list and then I deployed
the package.
After running my Overall Compliance report it shows that the systems are compliant, but when I view the "Compliance 5 - Specific Computer" I see that "Internet Explorer 11 for Windows 7 for x64-based Systems" is listed in the report.
This is just a testing phase right now and I have not created a WSUS like Domain level GPO. I understand that the SCCM client creates a local policy on the clients for the location of the Software Update Point (Specify
Intranet Microsoft update service location), but the "Configure Automatic Updates" policy is set to Not Configured, which it looks like when this
is set, the "Install updates automatically (recommended)" at 3AM is the default.
Is the reason why the "Internet Explorer 11 for Windows 7 for x64-based Systems" update is showing up in the list due to the fact that the "Configure
Automatic Updates" policy is set to Not Configured
and therefore it is still reaching out to check Windows Update online?
So, if I do create a Domain level GPO to Disable the "Configure
Automatic Updates" policy, then the "Internet Explorer 11 for Windows 7 for x64-based Systems" update would not show up in the "Compliance 5 - Specific Computer" report?
By the way, I have a Software Update Maintenance Window configured for the hours of 1AM-4AM so the 3AM default time falls within this time frame, therefore, I am assuming the SCCM 2012 client will not allow the Windows Update Agent to install the "Internet
Explorer 11 for Windows 7 for x64-based Systems" update, even though it has detected it is "Required".
ThanksBut, don't you need a Deployment Package in order to deploy the Software Update Group? The Software Update Group uses the downloaded updates contained in the Deployment Package located in, wherever the Package Source is, right?
One more quick question that you will know right off hand, because, well, you just will I'm sure.
No. The software update group really has nothing to do with any update packages. The update group assigns updates to clients and in turn clients use update packages to download assign and applicable updates from. There is no connection between the two though
as the client can download an update from any available update package. Thus, it's more than possible to updates in an update package that are not in any update groups and it is also possible for an update to be in an update group without being in any update
package.
If the "Configure Automatic Updates" policy is set to "Not Configured" and since this keeps the 3AM Automatic Updates default, if I was to remove the Software Update Maintenance Window from being between 1AM-4AM, will the WUA agent install updates
at 3AM, or no because the SCCM 2012 client still manages and oversees it and basically blocks that from occurring?
No, ConfigMgr does not in any way block the WUA; however, the WUA can only autonomously install updates it downloads directly from WSUS. Thus, since there are no updates approved or downloaded in your WSUS instance, there's nothing for it to download and
install. If you happen to actually be going into WSUS and approving updates (which you should not be doing as its unsupported), then yes, it actually would install updates -- this is outside of ConfigMgr's control though. Generally, disabling the WUA via a
GPO is the recommended to prevent any accidental installations or reboots (as the WUA wil also check for initiate pending reboots outside of ConfigMgr).
Lots more info in these two blog posts:
- http://blog.configmgrftw.com/software-update-management-and-group-policy-for-configmgr-what-else/
- http://blog.configmgrftw.com/software-updates-management-and-group-policy-for-configmgr-cont/
Jason | http://blog.configmgrftw.com -
How do I move tabs from one window to another window?
With the previous version of firefox, I could drag a tab from one window to another window. (and if there was only one tab left in that window, it would automatically close that window because there were no more tabs open in it)
With the latest version of firefox, '''How do you drag or move a tab from one window to another window'''Hi,
To move to the next tab it's '''Ctrl''' + '''Tab''' or '''Ctrl''' + '''Pg Dn''' (Page Down). To go to the previous tabs (reverse order) it's '''Ctrl''' + '''Shift''' + '''Tab''' or '''Ctrl''' + '''Pg Up''' (Page Up) keys. More about this and other keyboard shortcuts [https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts here.] -
How can I remove the applications from the Content Administrator
I had undeployed the applications from Content Administrator in two ways:
A:
1. Start the tool using the go.bat located in \usr\sap\<SID>\<Instance Name>\j2ee\admin folder
2. Log in with an Administrator user.
3. Under the Server node click Services-> Deploy.
4. In the runtime tab, on the right hand side screen click on the Applications checkbox. The list of all deployed applications appears.
5. Select the application and click on the Remove button.
B:
Undeploying using SDM remoteGUI.
after I finished that,the application still exist in the browse of Content Administrator Web Dynpro.
But it is'n invailable.When I click the application name,it throws exceptions:
Failed to get the list of names of referenced deployable objects for deployable object 'local/Welcome'.
Failed to get list of defined JCO clients for deployable object 'local/Welcome'.
Failed to get the list of names of referenced deployable objects for deployable object 'local/Welcome'.
Failed to get enable state for 'local/Welcome'.
No resource bundles found for development component ''local/Welcome''.
My question is , how can I remove it form the list.Hi,
Have you restarted the server after removing the application from the Visual Admin?
Regards,
Satyajit. -
product - PC Toshiba satellite pro Windows
Iphone 3 Model MC603b/a
PC and Iphone were previously successfully associated. I have removed the device from the PC but cannot reconnect itCall AppleCare, because, according to Apple, removing the devices from your support profile should have fixed this issue. You can also try changing your Apple ID password, but given what you've done, I doubt this will help.
-
Realy no one knows how to remove the word "java applet window" besides sign
Hi, everyone,
I am trying to remove the line "java applet window" from my nice/colorful interface, but what I was told is that I can not remove if i do not sign for digital singiture. Is this really a limition of Applet?
I do not know why t he design want to add this stupid feature. As most people are not technical people, they do not care whether it is applet or not. For technical people, they should know that some thing popup from the browser and have a "java" sign on the right top corner is Applet.
Only too sad about that.In the browser window, the address bar will also display the correct URL for the page being displayed.
An applet window could spoof this address bar and otherwise mimic the look and feel of the browser (or any other application), thus tricking the user into believing the window to be legitimate.
Just because there are already potential security/privacy issues in the applet specification, doesn't mean we want to open up another one! Why do you want an unsigned applet with a window without a warning message? You'll need a certificate anyway if you're planning on using secure communication - sending client data across an unsecure connection is rather less professional than spawning a window with a well-known and generally-ignored warning message. -
How to remove the KF from cube .
How to remove the KF from cube , I am not able to .
When I drag the KF outside the structure , I am not able to .
Regards,Hi Jain,
If data is available in the Info cube we can not Edit,delet and Add a infoobject.But In BI7.0 we a option called remodeling in administration Tab.By this we can add a new infoobject or we can delet it nad we can edit it also.
i hope this will help u
assigne point if this help u
Regarding
JT Goud -
Revision: 4901
Author: [email protected]
Date: 2009-02-09 09:27:39 -0800 (Mon, 09 Feb 2009)
Log Message:
Only remove the children from the textFlow when they are going to be immediately replaced. Side effect from SDK-18880.
QE Notes:
Doc Notes:
Bugs: SDK-19177
Reviewers: Gordon
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-18880
http://bugs.adobe.com/jira/browse/SDK-19177
Modified Paths:
flex/sdk/branches/i10/frameworks/projects/flex4/src/mx/graphics/TextGraphic.asThis is a problem of overall design. It is not a scripting issue.
NET USE wil only delete the drive you tell it to delete. You will need to know in advance which drive that is. There is no magic in WIndows. YOu must tel it everything.
Bill suggests GPP which is very easy to use and very flexible. It avoids learning how to write scripts and understand much of Windows. Just set the values and they do allof this for you. There are checkboxes for most issues.
Most of us have not mapped drives since shortly after the release of Vista many years ago. Save your self a lot of headaches and use the tools that were built to do this/
¯\_(ツ)_/¯
Maybe you are looking for
-
MRP User Exit/BAdI for changing plant stock
Hi, I have a client who is wanting to add consignment stock to plant stock during the MRP run for materials with a certain material group. I need to find an exit or a BAdI which is called at an appropriate time to have a developer code this function.
-
Change the size of a .mov
A try to change the size from 640x480 to 480x320 pix how do i do that ? Tia
-
I can't synchronize my iPad 2 with my computer anymore
I used to synchronize and make a backup with my computer, with a connection cable. but now it doesn't work anymore. I don't use the icloud, can that be the problem?
-
How can I backup my whole system to dvd?
-
Request For Enhancement: paintForeground() and paintBackground()
I would like to propose that the paintComponent() methods of JComponent (and descendents) and the paint methods of ComponentUI (and descendents) be further broken down to call paintBackground() followed by paintForeground(), and possibly even paintBo