[SOLVED] SLiM locked in Virtual Box

So I installed the newest iso, got things ok in terminal and installed SLiM, but I'm stuck at the SLiM login. Neither root nor user works. I've tried console as username to force xterm, but all I get is a black screen with an X for a mouse. tried exit and nothing happened. I really need to get back to no GUI so I can edit the options for SLiM and get myself started. I'm going to be running Razor-QT on top of Openbox and SliM as login. Problem is I can't install Razor until I can visit the AUR..... Anyway, if someone can get me the hell out of slim I'd appreciate it.
Last edited by al0ngcam3asp1d3r (2012-08-01 00:25:50)

TheCuban wrote:Type "console" as a username, should give you a console. If it doesn't, it it kinda "freezes" on you, then hit ALT + F1 and you should be good to go!
You freaking rock bro. I'm sorry to be a pain in the ass to everyone, but most of my experience is in Ubuntu (I know that's like the f word) but I've run arch before and adored it, and have decided to use it as the base of a new distro which is like Bugtraq (I'm the graphics developer for the new version in dev) built on Arch for speed, so I'm I'm going to probably ask a lot of questions, however I am good at RTFM so I'll try not to ask any stupid questions.

Similar Messages

[SOLVED] Guest Arch in Virtual Box Internet Problems

I have installed Arch a few times already in virtual machines on Virtual Box and each time it is unable to configure the internet connection properly. Having gone through the beginner wiki-pages on starting with Arch, I have tried "ping -c 3 www.google.com" and get "ping: unknown host www.google.com". However, IP addresses usually work with 0% packet loss.
I then followed the "hwdetect" instruction and that yielded "-bash: hwdetect: command not found". The command "modprobe pcnet32" does not yield an error and returns nothing.
I have also tried other methods
http://eligere.wordpress.com/2008/03/05 … i-problem/
http://bbs.archlinux.org/viewtopic.php?id=55811.
Thanks.
Last edited by zeug (2009-05-08 23:03:56)

Wikimig wrote:
Hi,
Pretty much the same here
That is strange but adding "nameserver 192.168.0.1" to /etc/resolv.conf enables me to access the internet. 192.168.0.1 is of course the IP of the host computer's vitual card but what is strange is: I need to use dhcpcd from guest to be given an IP that isn't even in the same range as 192.168.0.1 (for instance 10.0.2.15)!!
So to basically, host PC has that virtual ethernet card with static IP 192.168.0.1 and internet connection shared (don't know if this is compulsory though) and guest uses dhcp, is given 10.0.2.15 (don't ask me where it gets it from because I disabled it on VirtualBox). Then I just have to add "nameserver 192.168.0.1" to resolv.conf and I'm good... till dhcpcd rewrites the resolv.conf. How could we set dhcp to use a particular DNS?
As you can see, I am not a DNS expert. Using static IPs for both would be great but it doesn't work
Does it help?
The 10.x.x.x.x address range is assigned because you are most probably using NAT networking on the Virtual Box configuration.
Try with 'Bridged'.
If all goes well you shouldn't need to fiddle with /etc/resolv.conf.
Still, if you still need to change /etc/resolv.conf, put your changes in a file called /etc/resolv.conf.head which will survive
the changes that sometimes DHCP does on /etc/resolv.conf.
Mektub

[SOLVED] Arch Linux Guest Virtual Box OSE problem

So I am installing my Arch Linux as a Guest in my Ubuntu partition, through Virtual Box OSE (3.2.8). I followed the wiki ( https://wiki.archlinux.org/index.php/Ar … lBox_Guest ) but still have an issue:
sudo pacman -S kernel26-headers xorg gcc make
sudo mount /dev/cdrom /mnt/cdrom
sudo /mnt/cdrom/VBoxLinuxAdditions-x86.run
But It fails on Shared folders, and cannot recognize X:
:: Building the VirtualBox Guest Additions Kernel Modules [BUSY]
:: Building the main Guest Additions module [DONE]
:: Building the shared folder support module [FAIL]
(Look at /var/log/vboxadd-install.log to find otu what went wrong)
:: Warning: Unknown version of the X Window System installed. Not installing X Window System drivers.
:: Installing graphics libraries and desktop services components [Done]
/var/log/vboxadd-install.log states:
/tmp/vbox.0/vfsmod.c:406:9: error: unknown field 'clear_inode' specified in initalizer
/tmp/vbox.0/vfsmod.c:406:9 warning: initalization from incompatible pointer type.
Which is strange, because as far as I know, clear_inode is part of the linux headers.
Any idea why this is happening? Do I just need to update VirtualBox to a newer version?
Last edited by gralamin (2011-03-11 18:22:14)

Updating Virtualbox fixed the issue.

[Solved] Canon 4400F In Virtual Box

Unfortunately Canon doesn't see fit to support Linux!:/ I noticed on an online review at Amazon that someone got it to work via XP in virtualbox. I tried this on an XP running in virtualbox and I can see the scanner listed in devices->usb devices->Canon CanoScan (0500). Unfortunately the scanning software can't find the scanner and Windows Device Manager doesn't show a scanner.
Any ideas? By the way, this is the only thing standing in my way to be able to run 100% Linux and yes I know I could buy another scanner.:D
Thanks
Last edited by rvickers (2009-10-29 16:21:53)

Solved
Added my user id to vboxusers

Cannot get my iphone5 to synch with my new computer. i am running itunes through a virtual box, Every time I try a box appeares telling me to enter security code- ? anyone know how to solve this ?

Cant get my iphone 5 to sync with my computer (new operating system). Am running XP through a virtual box. When I try to sync the phone it keeps asking for auto lock code, there is no box to type it into and I can find nothing on the phone itself to solve the problem.
This makes it impossibble to sync with my itunes account. Anyone out there able to help ?

Have you tried contactint the app's developer?

(solved?) Virtual Box, kernel26-bfs, 1000hz?

I switched to the bfs patched kernel, but I get an error when the kernel tries to load the virtualbox module. I assume this is because the default kernel is using a hz rate higher than 1000. I read 1000 is needed, or else you can break some things like virtual box. My question is how can I set the rate to 1000? I searched the grub page and looked around the bfs documentation and it seems everyone agrees to set the kernel hs to 1000 but how to do it doesn't seem to be discussed.
Sorry for the newbie question!
edit:
I may have solved it. I think I needed to recompile the kernel module and hopefully it will work on my next reboot automatically. I won't know until I reboot, and I can't until tomorrow. I may be back!
Last edited by Google (2010-09-28 12:05:07)

Regarding HZ, you set it in the kernel config when building the package (see the PKGBUILD). Another option is to use ck's patches which change the default from 250 to 1000.
And ... umm ... what is your rate anyways? The default is definitely not more than 1000.
I'm afraid I can't help you with VirtualBox as I know nothing about that.

[SOLVED] virtual box (vboxdrv: not loaded)

I have installed virtualbox
pacman -S virtualbox_bin
and installed virtualbox_bin 3.0.0-2
/etc/rc.d/vboxdrv not found
When I run virtual box, it says vboxdrv is not loaded
what to do
Last edited by sant527 (2009-07-10 06:33:36)

For reference..
pacman -Ql packageName shows what files a package contains.
You might add | grep bin or something of the sort after it to find the binaries quickly (sometimes.. some files contain 'bin' in the title or a folder name, obviously)
that question has been asked many times before. please learn to use Pacman, the Forum (and corresponding Search functions), and the Wiki before asking questions, and edit your first post to append [SOLVED] to the title when you find an appropriate answer to your questions.. it will save those of us looking to help time and frustration if you do all of that. thanks.
Last edited by FrozenFox (2009-07-06 09:26:17)

[Solved] Installing Virtual box

I'm trying to install Virtual box from `.run` file. (I downloaded that from http://download.virtualbox.org/virtualb … amd64.run)
I'm runing following command to install Virtual box :
sudo sh VirtualBox-4.3.6-91406-Linux_amd64.run
Gets me following error :
VirtualBox Version 4.3.6 r91406 (2013-12-18T16:33:45Z) installer
Please install the build and header files for your current Linux kernel.
The current kernel version is 3.12.6-1-ARCH
Problems were found which would prevent VirtualBox from installing.
Please correct these problems and try again.
Any helps would be appreciated.
Last edited by kamrava (2014-01-06 19:55:23)

haaja wrote:
TheSaint wrote:
Best was
# pacman -S linux-headers virtualbox
Virtualbox only need the kernel headers during the build phase. Even if that wasn't the case, pacman can handle dependencies just fine.
Indeed, my mistake.

[SOLVED] Virtual Box Install Question

I have been working through the Arch Linux wiki regarding installing virtualbox.
I do not believe I have a custon kernel, as I would not know how to customize it, but here is my kernel info:
Name : linux
Version : 3.8.4-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.8.4
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your
country
Required By : nvidia virtualbox-host-modules
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64728.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Wed 20 Mar 2013 05:16:17 PM EDT
Install Date : Tue 02 Apr 2013 09:36:32 AM EDT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Unknown
Following the wiki (https://wiki.archlinux.org/index.php/VirtualBox) I installed virtualbox and virtualbox-host-modules.
When I go to launch virtual box I get:
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.8.4-1-ARCH) or it failed toload. Please reinstall
the kernel module virtualbox-host-modules or if you don't use our stock kernel
compile the modules withsudo dkms autoinstallYou will not be able to start VMs
until this problem is fixed.
After googling I have read that many people get this warning after a kernel update but in
my cause this is a fresh install.
I even followed the steps for a custom kernel and reveived the follow:
input:
dkms install vboxhost/$(pacman -Q virtualbox|awk {'print $2'}|sed 's/\-.\+//') -k $(uname -rm|sed 's/\ /\//')
response:
Error! echo
Your kernel headers for kernel 3.8.4-1-ARCH cannot be found at
/usr/lib/modules/3.8.4-1-ARCH/build or /usr/lib/modules/3.8.4-1-ARCH/source.
Pretty much at a loss and any help would be appreciated.
Last edited by soulrainX (2013-04-13 18:03:58)

So now my kernel is up to date:
Name : linux
Version : 3.8.6-1
Description : The linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.8.6
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your
country
Required By : nvidia virtualbox-host-modules
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 64354.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Sat 06 Apr 2013 01:32:32 AM EDT
Install Date : Sat 13 Apr 2013 10:36:09 AM EDT
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
and now I can run
modprobe vboxdrv
and it seems to work, yet when I run VirtualBox, I still get:
WARNING: The vboxdrv kernel module is not loaded. Either there is no module
available for the current kernel (3.8.4-1-ARCH) or it failed to
load. Please reinstall the kernel module virtualbox-host-modules or
if you don't use our stock kernel compile the modules with
sudo dkms autoinstall
You will not be able to start VMs until this problem is fixed
Just tried removing virtualbox via
pacman -Rns virtualbox
and reinstalling and it stills reads kernet as 3.8.4-1
Last edited by soulrainX (2013-04-13 17:27:20)

[solved] Virtual Box

I have windows 7 installed in a virtual box. It worked perfectly. Then I upgraded my system to the lastest linux kernel. Now Virtual Box says that vboxdrv is not loaded so I can't boot windows.
When I did this:
[meskarune@Lychee ~]$ modprobe vboxdrv
WARNING: All config files need .conf: /etc/modprobe.d/framebuffer_blacklist.pacsave, it will be ignored in a future release.
FATAL: Module vboxdrv not found.
I tried to see if I could update virtual box...but yaourt is not finding it. There is another topic on that here: http://bbs.archlinux.org/viewtopic.php?id=74843
should I try to update it manually and see if that helps? Is there something I need to do with the new kernel?
Last edited by Meskarune (2009-06-26 16:11:09)

heh. ok now I feel dumb. Upgraded the package and saw the note:
"run vbox_build_module as root every time the kernel is upgraded"
now it works.

[solved] virtual box share folder unable to mount

I am having vista and using virtual box installed arch linux as the guest.
I have installed the base system from archlinus iso
I created a shared folder called prem
When I tried to mount share folder through I get the following
mount -t vboxsf prem /mnt/vbox
mount: unknown filesystem type 'vboxsf'
I found that I have to install guest additions
I clicked on the devices - install guest additions
I didnt found any file at /media/cdrom/VBoxLinuxAdditions-x86.run
How to install VBoxLinuxAdditions-x86.run where is the file located.
Or in arch linus should I install something to make share folder work
can any one help
Last edited by sant527 (2009-08-09 15:51:23)

howto use shared folders in Linux guests - http://forums.virtualbox.org/viewtopic.php?f=3&t=15868
After installing the Guest Additions, you can use the Shared Folders Functionality. To access them, you have to define at least one in the VM settings. Open the VM Settings and go to Shared Folders. You can define them there. Click on the Add button and browse for a folder you want to share. Make sure that the name of the share doesn't contain any illegal characters like white spaces. Keep the name as simple as possible. In this howto, I will use the name share.
Now that you have defined a SF, it's time to mount it. Boot the Guest and open a terminal. Create a folder where you will mount it on. E.g. in your home folder. I will use ~/host for the mount point.
Now mount it with the following command:
Code: Select all Expand viewCollapse view
sudo mount -t vboxsf share ~/host
Note that with this, the default mount options are used and all files are owned by root. This can be changed by adding some mount options. Options are passed on with the -o parameter. You can use multiple options with one parameter, seperate the values with a comma. See the man page of mount for more info on which options you can use. The User Manual also notes the options compatible with the Shared Folders. To mount the SF so that you are the owner of the files, use this command:
Code: Select all Expand viewCollapse view
sudo mount -t vboxsf -o uid=1000,gid=1000 share ~/host
If you want to have it mount automatically upon each boot, put the mount command in /etc/rc.local (Debian based distro's), or whatever script is run at the end of the boot process. The Shared Folders service should mount them automatically, but that doesn't always happen.
Using /etc/fstab has little effect, because that file is processed before the SF module is loaded and will fail to mount the share. Sometimes, the share does get mounted because the GA check for it when they are loaded upon boot, but it's very flaky, meaning it doesn't work most of the time. You're better of with the first option.

Virtual Box... [Solved]

Just updated my 64 bit arch to the latest everything. I have virtualbox_bin installed. I ran vbox_build_module as root. When I try to run my xp virtual machine i get this error:
Failed to open/create the internal network 'HostInterfaceNetworking-eth0' (VERR_SUPDRV_COMPONENT_NOT_FOUND).
Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND).
One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND).
/etc/init.d/vboxdrv setup doesn't work. Hence this post. I feel like i've fixed this problem before maybe, but searching around the net hasn't helped much nor has my memory been jogged. Ubuntu Forums: uninstall, reinstall
i have virtual box installed in /opt
Thanks in advance.
PS. "jog your memory" is a really weird phrase...
Last edited by Meskarune (2009-10-26 20:21:41)

Meskarune wrote:Just updated my 64 bit arch to the latest everything. I have virtualbox_bin installed. I ran vbox_build_module as root.
When i did:
lsmod | grep vboxdrv
lsmod | grep vboxnetflt
vboxdrv showed up and vboxnetflt did not, so i did modprobe vboxnetflt and it worked. Restarting probably would have worked as well.... maybe i should restart my computer more often...><
Thanks everyone. I'm feelling a bit dumb right now...I needed to use windows xp to do some japanese homework before my class at 1pm.
is there a way to automate these steps in the future so i don't have to run vbox_build_module and restart vboxdrv and vboxnetflt everytime i update the kernel?

[SOLVED]access apache from windows inside virtual box

Hi everyone,
I am a web developer and I use Linux and i have Apache, MySQL running on it, I have windows xp running as a guest inside Virtual Box, I really want to access my apache from windows guest so i test my sites on internet explorer, please help me, i tried the documents, and the forum here but i could not figure out how to do it, so please what is the simplest way to do this?
Last edited by shalaby (2012-04-22 19:52:13)

It'll depend on which networking mode you're using on that guest. If you're using the default (NAT), you can simply reach your host os on the default gateway ip of the guest's network adapter.

ERROR installing MAC OSX onto my W510 Mint 9 Virtual Box.....

Hi all,
Im running Linux Mint 9 & trying to install osx 10.6.3 via latest virtual box. (for viewing purposes only!!) Ive tried it with Empire EFI, iBoot and Legacy boot cd.
All settings in VB are as tutorials that are out there on the web so im pretty sure my settings are ok. Once one of the above bootable discs loads it asks me to replace the disc with the msc os dvd (retail) and then press F5
So i wait for the osx disc to mount, wait for about 1-2 minutes (as advised), press F5 and the disc starts spinning for about a second then stops. The following error then comes up on the Virtual screen window:
Block 0x18a96a sectors 0
this continues to scroll down the page then nothing. Im pretty much useless at pc's and i only use them for wmy work (CAD) Ive been getting help from a guy who is trying to step by step me through the installation process, he has installed it but running Ubuntu.
Here is the link to our blog he has created on his web page. (which i have to say a big thanks you to him for)
Moderator edit; Link removed
So can anyone suggest why the disc is not loading from the DVD drive? possibly a simple setting on my w510?
Any help with this would be greatly appreciated.

MrPeter1985 wrote:
READ THIS
Even though this is in VB it is still illegal per Apple.
Good point.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Installing oracle db 10.2.0.1 on REHL 5.6 using virtual box

I can't solve this erratic behavior:
Scenario: Phisical machine Windows 7 32b, virtual box v 3.2.12
Virtual machine Oracle Linux 5.6 64b installed without problems (I have installed several machines with p.e. SuSE 10 64b,
SuSE 11 64b and installed Oracle 10g without problems, Linux Oracle 5.6 with Oracle DB 11 ok)
Trying to install Oracle 10.2.0.1 (need to be this version) every time I exec runInstaller, it begins, but simply freezes the
machine. Each time it freezes at different points: sometimes at the first screen, other times I can reach the last screen with
the install button.
¿can someone give any ideas ?
Thanks

First attempt
The oui freezed the virtual machine, in the screen where i was setting the users passwords
Checking the oraInventory/logs folder, ther are 3 files:
     1) orainstallxxxx.err      is empty
     2) orainstallxxxx.out     is empty
     3) InstallActions.log: as follows (I'll cut several "middle" lines because of the 30000 characters limits in the forums messages)
INFO: Using paramFile: /opt/install/database/install/oraparam.ini
INFO: Checking installer requirements...
INFO: Checking operating system version: must be redhat-3, SuSE-9, redhat-4, redhat-5, UnitedLinux-1.0, asianux-1 or asianux-2
INFO: Passed
INFO: All installer requirements met.
INFO: The number of files bootstrapped for the jre is 619.
INFO:
INFO: The number of files bootstrapped for the oui is 94.
INFO: Execvp of the child jre : the cmdline is /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java, and the argv is
INFO: /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java
INFO: -Doracle.installer.library_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui/lib/linux
INFO: -Doracle.installer.oui_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui
INFO: -Doracle.installer.bootstrap=TRUE
INFO: -Doracle.installer.startup_location=/opt/install/database/install
INFO: -Doracle.installer.jre_loc=/tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2
INFO: -Doracle.installer.nlsEnabled="TRUE"
INFO: -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2011-05-24_11-54-43PM/prereq
INFO: -Doracle.installer.unixVersion=2.6.32-100.26.2.el5
INFO: -mx150m
INFO: -cp
INFO: /tmp/OraInstall2011-05-24_11-54-43PM:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oneclick.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/srvm.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/share.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xml.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/emCfg.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstImages.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/classes12.jar::/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4-nls.jar
INFO: oracle.sysman.oio.oioc.OiocOneClickInstaller
INFO: /tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2/bin/java
INFO: -Doracle.installer.library_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui/lib/linux
INFO: -Doracle.installer.oui_loc=/tmp/OraInstall2011-05-24_11-54-43PM/oui
INFO: -Doracle.installer.bootstrap=TRUE
INFO: -Doracle.installer.startup_location=/opt/install/database/install
INFO: -Doracle.installer.jre_loc=/tmp/OraInstall2011-05-24_11-54-43PM/jre/1.4.2
INFO: -Doracle.installer.nlsEnabled="TRUE"
INFO: -Doracle.installer.prereqConfigLoc=/tmp/OraInstall2011-05-24_11-54-43PM/prereq
INFO: -Doracle.installer.unixVersion=2.6.32-100.26.2.el5
INFO: -mx150m
INFO: -cp
INFO: /tmp/OraInstall2011-05-24_11-54-43PM:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstaller.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oneclick.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xmlparserv2.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/srvm.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/share.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraInstallerNet.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/xml.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-collation.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/orai18n-mapping.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/emCfg.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ojmisc.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstImages.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_de.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_es.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_fr.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_it.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ja.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_ko.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_pt_BR.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_CN.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/InstHelp_zh_TW.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/oracle_ice.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/help4-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/ewt3-nls.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/swingaccess.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/classes12.jar::/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/OraPrereq.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4.jar:/tmp/OraInstall2011-05-24_11-54-43PM/oui/jlib/jewt4-nls.jar
INFO: oracle.sysman.oii.oiic.OiicInstaller
INFO: UnixGroups="{oinstall,dba,}"
INFO: -scratchPath
INFO: /tmp/OraInstall2011-05-24_11-54-43PM
INFO: -sourceLoc
INFO: /opt/install/database/install/../stage/products.xml
INFO: -sourceType
INFO: network
INFO: -timestamp
INFO: 2011-05-24_11-54-43PM
INFO: -oneclick
INFO: Environment Variables:
INFO:      ORACLE_HOME =
INFO:      PATH = /opt/install/database/install:/usr/bin:/usr/ccs/bin:/usr/kerberos/bin:/usr/local/bin:/usr/bin:/bin:/usr/X11R6/bin:/home/oracle/bin
INFO:      CLASSPATH =
INFO: Username:oracle
INFO: Setting variable 'PREREQ_CONFIG_LOCATION' to '/tmp/OraInstall2011-05-24_11-54-43PM/prereq'. Received the value from variable association.
INFO: Reader/Writer 'oracle.sysman.oii.oiic.OiicGlobalContextXMLReaderWriter' was created.
INFO: Retrieving the global context: OiicGlobalContext.getGlobalContext()
INFO:
*** Welcome Page***
INFO:
*** Specify Inventory directory and credentials Page***
INFO: Setting the 'InventoryLocation ( INVENTORY_LOCATION )' property to '/opt/oracle/oraInventory'. Received the value from the UI page.
INFO: Setting the 'UnixInstallGroup ( UNIX_GROUP_NAME )' property to 'oinstall'. Received the value from the UI page.
INFO: Initializing install inventory
INFO: Setting up install inventory
INFO: Unable to read the list of homes from the inventory.
INFO: Oracle Universal Installer version is 10.2.0.1.0
INFO:
*** Specify Source Location Page***
INFO: Initializing OUI Shiphome access setup
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: fetch the file: /opt/install/database/stage/shiphomeinfo.properties
INFO: Performing operation for OUI Shiphome access setup
INFO:
*** Select a Product to Install Page***
INFO: Setting the 'TopLevelComp ( ToplevelComp )' property to 'oracle.server, 10.2.0.1.0, >0.0.0.0.0, [ 46 ][OH:2]'. Received the value from the default settings.
INFO:
*** Select Installation Type Page***
INFO: Setting the 'InstallType ( DEP_MODE )' property to 'EE'. Received the value from the UI page.
INFO: Setting the 'TopLevelInstallType ( TLDepModes )' property to 'EE,'. Received the value from the UI page.
INFO: The selected install type is "Enterprise Edition".
INFO:
*** Specify Home Details Page***
INFO: Setting the 'OracleHome ( ORACLE_HOME )' property to '/opt/oracle/oracle/product/10.2.0/db_1'. Received the value from the UI page.
INFO: Setting the 'OracleHomeName ( ORACLE_HOME_NAME )' property to 'OraDb10g_home1'. Received the value from the UI page.
INFO: Initializing OUI Oracle Home access setup
INFO: Setting variable 'ORACLE_HOME' to '/opt/oracle/oracle/product/10.2.0/db_1'. Received the value from the UI page.
INFO: Loading shiphomepropertiesfrom /tmp/OraInstall2011-05-24_11-54-43PM/shiphomeproperties.xml
INFO: DefaultifyLangiages : Value of oracle.installer.defaultifyLanguages : false
INFO: Setting the PROD_HOME variable of 'oracle.server_10.2.0.1.0' to ''. Received the value from the variable calculation.
INFO: oracle.server Product Location: Empty path specified.
INFO: This is not a cluster system.
variable = oracle.sysman.server.EMConfigureOption
value = LOCAL
INFO: Query Returned: true
INFO: Setting variable 's_recoveryAreaDestination' to ' -recoveryAreaDestination NO_VALUE '. Received the value from a code block.
INFO:
*** Specify Database Schema Passwords Page***

[SOLVED] SLiM locked in Virtual Box

Similar Messages

Maybe you are looking for