[Solved] stumpwm: how to get rid of newline using run-shell-command

Hi all,
in order to set up my mode-line for stumpwm, I've been using the commad
run-shell-command such as in:
(setf *screen-mode-line-format*
(list
'(:eval (run-shell-command "date" t))
'(:eval (run-shell-command "date" t))))
However, each instance of run-shell-command creates an unnecessary
newline (so that my mode line contains two lines without necessity).
Do you know how I can get rid of this newline?
Thanks!
Last edited by falsum (2011-05-23 07:12:27)

jiyuu wrote:
I didn't test it but the function you want is 'string-trim' or 'string-right-trim'.
You use it like this:
(string-trim '(#\Newline) my-string)
So in your case:
(setf *screen-mode-line-format*
(list
'(:eval (string-trim '(#\Newline)
(run-shell-command "date" t)))
'(:eval (run-shell-command "date" t))))
That works perfectly well. Thanks a lot jiyuu!!

Similar Messages

WebHelp - CSH X5 how to get rid of popups using browsers

I just registered today for the forum. I have seen a lot of
info about this issue, but I have not seen anyone elses solution
(code solution). Can you point me in the right direction to a
previous message posting please?
Problem: Producing WebHelp using RoboHelpX5 and when we call
the CSH from the application, we get the message about popups (need
to enable to view, etc.). Is there a workaround to this that will
bypass this and enable popups. I know that you can simply enable
popups on your personal machine's browser for this to work, but we
will be releasing a product on April 2nd and don't want all of our
customers to do this.
We need solutions for IE and Firefox.
Help if you can. Thanks!!!

Hi lanaweb and welcome to our community
Are you referring to the yellow Information bar you see when
you run WebHelp locally off the C drive? Or are you seeing
something else related to popups after placing your WebHelp content
on a server?
Cheers... Rick

When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can use my ID, which is in Mail, Contacts etc. The ID I get, I can't find, so that I can delete it. What to do?

When I try to buy something, I get an Apple-ID which is not the one I want to use, and I don't know how to get rid of it either, so that I can replace it with my ID in Mail, contacts etc. The ID I get without wanting it, I can't find anywhere. I have to delete it. How do I solve this problem, anyone?

My content was obtained through another ID, which popped up earlier. Now this one doesn't pop up, and my current ID doesn't pop up either, but another one. How do you find an ID which is not in the store, and not in Mail, contacts etc. either?
Or is it possible to write the ID yourself when you want to buy something, not only to have it popped up being unable to be changed?

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and why I have it

I've got OSX/Genieo.A virus on my mac and don't know how to get rid of it and w I have it

There is no need to download anything to solve this problem.
You installed the "Genieo" malware. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the malware (as long as you never reinstall it.)
Malware is always changing to get around the defenses against it. These instructions are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data before proceeding.
Step 1
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
          Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Applications/Genieo.app
/Applications/Reset Search.app
/Applications/Uninstall Genieo.app
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib
/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib
~/Library/Application Support/com.genieoinnovation.Installer
~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this trojan. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that this Internet criminal has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the attacker sometimes shows up under the name "Genieo support." He will tell you to run a fake "uninstaller." As he intends, the uninstaller does not completely remove the malware, and is in fact malware itself.

How to get rid of the reference lines on the front panel

I forgot how I created a couple of horizontal and vertical reference lines on the front panel. It looks like the origin lines on the front panel. When I move my program to another monitor with different resolution, all the layout is messed up because of the reference lines can not change with the resolution. Did anybody meet this before? How to get rid of them?
Attached are the 2 creen shot of front panels.
Thanks in advanced.
Solved!
Go to Solution.
Attachments:
front panel.png ‏63 KB
front panel2.png ‏42 KB

You will have to click on the top menu and choose options see below
when you do this window will pop up and you scroll down until you get to the front panel options. See below
Tim
Johnson Controls
Holland Michigan

How to get rid of the Unwanted background shadow

I created a popup (in DataGrid). However, when th popup DataGrid displays, the backgroun becomes shadowed (see the image). Anyone knows how to get rid of it? Thanks.
<?xml version="1.0" encoding="utf-8"?>
<mx:VBox
xmlns:mx ="http://www.adobe.com/2006/mxml"
borderColor ="#6CC417"
borderStyle ="solid"
dropShadowColor ="#F9B7FF"
dropShadowEnabled ="true"
shadowDirection ="right"
shadowDistance ="10"
>
<mx:Script>
<![CDATA[
import mx.containers.Grid;
import mx.events.FlexMouseEvent;
import mx.events.ListEvent;
import mx.managers.PopUpManager;
import com.esri.solutions.flexviewer.widgets.PopupForms.Popup_HomeState;
private var popup:Popup_HomeState;
private function itemClickEvent(event:ListEvent):void {
var iIndex:int = event.rowIndex;
var sItem:String = dg.dataProvider[iIndex].col1;
showPopup(sItem);
    popup.addEventListener(Event.CLOSE, closePopUpWindow);
    popup.addEventListener(FlexMouseEvent.MOUSE_DOWN_OUTSIDE, closePopUpWindow);
public function showPopup(s:String):void {
   if(s == "Home State" || s == "Unit State") {
popup = PopUpManager.createPopUp(this, Popup_HomeState, true) as Popup_HomeState;
PopUpManager.centerPopUp(popup);
private function closePopUpWindow(evt:Event):void {
    PopUpManager.removePopUp(popup);
]]>
</mx:Script>
<mx:VBox>
     <mx:DataGrid id="dg" width="360" height="176"
      rowCount="8" showHeaders="true" itemClick="itemClickEvent(event)" >
         <mx:columns>
             <mx:DataGridColumn dataField="col1" width="120" headerText=""
itemRenderer="com.esri.solutions.flexviewer.widgets.myForms.DGRenderers.ImageRenderer" />
             <mx:DataGridColumn dataField="col2" width="260" headerText=""/>
         </mx:columns>
     </mx:DataGrid>
</mx:VBox>
</mx:VBox>
--------------------- Below is Popuup_HomeState.mxml
<?xml version="1.0" encoding="utf-8"?><mx:VBox xmlns:mx ="
http://www.adobe.com/2006/mxml"borderColor ="
#6CC417" borderStyle ="
solid" dropShadowColor ="
#F9B7FF" dropShadowEnabled ="
true" shadowDirection ="
right" shadowDistance ="
10"
>
<mx:Script><![CDATA[import
mx.containers.Grid;import
mx.events.FlexMouseEvent;import
mx.events.ListEvent;import
mx.managers.PopUpManager;import
com.esri.solutions.flexviewer.widgets.PopupForms.Popup_HomeState;
　 private
var popup:Popup_HomeState; private
function itemClickEvent(event:ListEvent):void { var iIndex:int = event.rowIndex;
var sItem:String = dg.dataProvider[iIndex].col1;showPopup(sItem);
// register event listeners for closing the popup window
// when the popup window close button is clicked...popup.addEventListener(Event.CLOSE, closePopUpWindow);
// or when an area outside the popup window is clicked...popup.addEventListener(FlexMouseEvent.MOUSE_DOWN_OUTSIDE, closePopUpWindow);
public
function showPopup(s:String):void {
if(s == "Home State" || s == "Unit State") {
//helpWindow = PopUpManager.createPopUp(this, Popup_HomeState, false); popup = PopUpManager.createPopUp(
this, Popup_HomeState, true) as Popup_HomeState;PopUpManager.centerPopUp(popup);
// method to close the popup window on close or mousedownoutside eventprivate
function closePopUpWindow(evt:Event):void {PopUpManager.removePopUp(popup);
]]></mx:Script>
<mx:VBox>
<mx:DataGrid id="dg" width="360" height="176" rowCount="
8" showHeaders="true" itemClick="itemClickEvent(event)" >
<mx:columns>
<mx:DataGridColumn dataField="col1" width="120" headerText=""itemRenderer="
com.esri.solutions.flexviewer.widgets.myForms.DGRenderers.ImageRenderer" />
<mx:DataGridColumn dataField="col2" width="260" headerText=""/>
</mx:columns>
</mx:DataGrid>
</mx:VBox>
</mx:VBox>

Problem solved by change the
popup = PopUpManager.createPopUp(this, Popup_HomeState, true) as Popup_HomeState;
to
popup = PopUpManager.createPopUp(this, Popup_HomeState, false) as Popup_HomeState;

How to get rid of file name that pops up with mouseover?

When a user is on my website and mouses over a link to another page, the name of that page comes up - for example, if I mouse over the link to the Mums Night Out page (while on the home page) the file name pops up (mumsnightout.html)
Any idea on how to get rid of that annoying issue?
Thanks,
roxpat

Is this question now solved?
Excuse me if it is, but I am really freaking out about this and don't know what to do.
I don't want to launch my website before everything is perfect and I really want the yellow-pop-up-box-bstrd to go away.
I am using this code which works fine in ff and safari but not in ie:
<script type='text/javascript'>
function clearTooltip() {
_links = parent.document.links;
for (i=0; i<_links.length; i++) {
_links.setAttribute('title', '');
chkFooter = setInterval('checkFooter()', 100);
function checkFooter() {
if (parent.document.getElementById('footer_layer') != null) {
clearTooltip();
clearInterval(chkFooter);
</script>
Should I modify it in some way? Any ideas?

How to get rid of pix in my iphoto library that are not imported?

I needed to clear the memory card of my husband's camera recently, and didn't have the canon software installed on my computer. So I tried using iphoto, but it crashed because the movies are high resolution and I guess iPhoto couldn't handle it. I managed to get them transferred another way, but now every time I launch iPhoto I get a message telling me that there are images in my iPhoto library that are not imported, and asking if I want to import them. If I try to import them, iPhoto crashes again. If I say "cancel" I get the same message again next time. I tried going into the finder to get rid of them but don't know where they are. No matter what I try to throw away, I still get the same message. How to get rid of those photos?

and didn't have the canon software installed on my computer.
You could also have used Image Capture in your Applications Folder.
but it crashed because the movies are high resolution and I guess iPhoto couldn't handle it.
iPhoto managed high resolution just fine. Perhaps you don't have the correct codec.
To solve you more immediate problem: go to your Pictures Folder and there you'll see your iPhoto Library Folder. Open it and inside you'll see a folder called 'Importing' or something close to that. Drag it to the desktop. Restart iPhoto. Does that help?
Regards
TD

Can any one tell me how to get rid of error code ox80010108

can any one tell me how to get rid of error code ox80010108 when i put a dvd in my hp touchsmart 520 thanks

Hello @charly6,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you are getting the error 0x80010108 when you insert your CD into your Optical Drive on your HP Touchsmart 520 Desktop PC. The error you are receiving is related to Windows Essentials and I suggest that you download and install the latest version from the Windows Essentials website. I believe that Windows Essentials was aware of this error and have corrected it in their updates.
Please re-post if you require additional support. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

How to get rid of locked file

I have a file that's locked that I kept in a folder titled junk because five years ago I couldn't figure out how to get rid of it. Just installed a new HD and tried to trash the folder and file. It's not working and now it's in two places because when I moved it it asked for name and password, then copied it into the trash and left it on the desktop. I know there must be a way to get rid of it. Secure Trash in Onyx didn't work. the file is nununu HFS+private data?
Any suggestions?

*Trash Problems*
If trash can't delete because an item is busy, try restarting the computer.
If trash won't delete because an item is locked, try holding down the option key when emptying the trash.
Try booting to Safe Mode (hold down the shift key while booting, restart may take a long time but let it go), sometimes just doing that works. Restart normally.
Reading
[You can't empty the Trash or move a file to the Trash in Mac OS X|http://docs.info.apple.com/article.html?artnum=106272]
[Solving Trash Problems|http://www.thexlab.com/faqs/trash.html]
[How To Fix Stubborn Trash and Why it Won't Delete|http://www.osxfaq.com/Tutorials/LearningCenter/HowTo/Trash/index.ws]
[rccharles: Discussion on trashing problem files with Terminal commands|http://discussions.apple.com/message.jspa?messageID=9168842#9168842]
*Utilities for emptying trash*
[Trash It! v3.6.1|http://www.nonamescriptware.com/?page_id=5]
[DropNuke|http://www.versiontracker.com/dyn/moreinfo/macosx/12664]
[Super Empty Trash 2.3|http://www.macupdate.com/info.php/id/16727] - Simple AppleScript applet that will empty the Trash with administrator privileges

How to get rid of a Digeste.dll error

Does anyone know how to get rid of a digeste.dll error that is in my C:\window\system32 safely
Thanks
Bob
Solved!
Go to Solution.

lordkirivos, in the future, please research a question before you provide a possibly incorrect answer. In this case, digeste.dll is related to spyware, so your answer makes absolutely no sense, and is not at all helpful.
@OP - http://www.google.com/search?hl=en&q=digeste.dll&aq=f&oq=

How to get rid of pop-ups on my macBook air?

One of my roommates recently downloaded torrent on my macbook air to watch a movie, and since then I have been experiencing popups every time I open a new page on safari. Also, my search engine has switched to something known as search-quick? I've tried a few different mac detox sites to no avail. Very frustrated. Any suggestions on how to get rid of this "virus" and pop-ups would be much appreciated!

There is no need to download anything to solve this problem. You may have installed a variant of the "VSearch" ad-injection malware.
Malware is always changing to get around the defenses against it. This procedure works as of now, as far as I know. It may not work in the future. Anyone finding this comment a few days or more after it was posted should look for a more recent discussion, or start a new one.
The VSearch malware tries to hide itself by varying the names of the files it installs. To remove it, you must first identify the naming pattern.
Triple-click the line below on this page to select it, then copy the text to the Clipboard by pressing the key combination command-C:
/Library/LaunchDaemons
In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "LaunchDaemons" may open. Look inside it for two files with names of the form
          com.something.daemon.plist
and
           com.something.helper.plist
Here something is a variable word, which can be different in each case. So far it has always been a string of letters without punctuation, such as "cloud," "dot," "highway," "submarine," or "trusteddownloads." Sometimes the word is "apple," and then you must be especially careful not to delete the wrong files, because many built-in OS X files have similar names.
If you find these files, leave the LaunchDaemons folder open, and open the following folder in the same way:
/Library/LaunchAgents
In this folder, there may be a file named
          com.something.agent.plist
where the word something is the same as before.
If you feel confident that you've identified the above files, back up all data, then drag just those three files—nothing else—to the Trash. You may be prompted for your administrator login password. Close the Finder windows and restart the computer.
Don't delete the "LaunchAgents" or "LaunchDaemons" folder or anything else inside either one.
The malware is now permanently inactivated, as long as you never reinstall it. You can stop here if you like, or you can remove two remaining components for the sake of completeness.
Open this folder:
/Library/Application Support
If it has a subfolder named just
           something
where something is the same word you saw before, drag that subfolder to the Trash and close the window.
Don't delete the "Application Support" folder or anything else inside it.
Finally, in this folder:
/System/Library/Frameworks
there may an item named exactly
            v.framework
It's actually a folder, though it has a different icon than usual. This item always has the above name. Drag it to the Trash and close the window.
Don't delete the "Frameworks" folder or anything else inside it.
If you didn't find the files or you're not sure about the identification, post what you found.
If in doubt, or if you have no backups, change nothing at all.
The trouble may have started when you downloaded and ran an application called "MPlayerX." That's the name of a legitimate free movie player, but the name is also used fraudulently to distribute VSearch. If there is an item with that name in the Applications folder, delete it, and if you wish, replace it with the genuine article from mplayerx.org.
This trojan is often found on illegal websites that traffic in pirated content such as movies. If you, or anyone else who uses the computer, visit such sites and follow prompts to install software, you can expect more of the same, and worse, to follow. Never install any software that you downloaded from a bittorrent, or that was downloaded by someone else from an unknown source.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Then, still in System Preferences, open the App Store or Software Update pane and check the box marked
          Install system data files and security updates (OS X 10.10 or later)
or
          Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

How to get rid of song on phone?

this sounds like the dumbest question, but I can't figure out how to get rid of a certain song on my phone. It pops up on shuffle all the time, and I know I must have added it to a playlist at some point.
But I have a bunch of long playlists and I cannot find it in any of them!
How can I tell which playlist a certain song is on?
Thanks
Bob

OK -- so I actually called AppleCare about this. I went through 30 minutes on the phone with the entry-level guy, and he couldn't help. He actually wanted me to check 'manually manage music" and have iTunes wipe my phone, then I was going to have to reselect all my music! And that would not have even fixed the problem, I know. He was clueless but thankfully escalated me to a dude who solved this in 30 seconds.
I had to delete the song *from* the phone. Went to the Music App, under More->Purchased, and swiped left on the song and then could delete it.
So, because I bought the song on the phone, and it wasn't in a playlist, I was not able to remove it from iTunes. I had to do it on the phone.

How to get rid of volume warning?

Hi!
I've got a Curve 9320 instead of 8900 recently. And I cannot find how to get rid of that annoying warning about exceeding the recommended volume.
Every time I tick the checkbox "I understand this warning" and then click on Continue button. And it's OK until the next turn off of the 9320 (I turn it off every night). The next morning it will give that warning again if I will try to increase the volume of music.
Where I can find an option to switch that warning message off?

Hey f13bis,
Welcome to the BlackBerry Support Community Forums.
Thanks for the question.
Open Media on the BlackBerry Curve 9320 smartphone and press menu>Options. Put a checkmark for Audio Boost and accept the terms and press Menu>Save. Then try to increase the volume.
Let me know if you have any more questions.
Cheers.
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

How the get rid of Lenovo ThinkVantage Tools

Hi
Has anybody an idea how to get rid of Lenovo ThinkVantage Tools in Windows 7? This stupid software doesn't have an uninstaller.
I am really angry that Lenovo provides software in 2010 that can't be uninstalled cleanly from a system.
Gerhard
Solved!
Go to Solution.

Has anyone on Lenovo team knows how to properly uninstall "Lenovo ThinkVantage Tools"? I just received the NEW 2 desktop M91 series for our company to test wether it is suitable for us. But this annoying "thinkvantage tools" conflict with our System Centre Essentials and Symantec softwares. I had uninstall the tools in the control panel but still the application link still appear on the start up menu. If I right click the application link on the start up menu the properties of "lenovo ThinkVantage Tools" is listed below.
C:\Windows\explorer.exe ::{26EE0668-A00A-44D7-9371-BEB064C98683}\2\::{A8A91A66-3A7D-4424-8D24-04E180695C7A}\Provider%5CMicrosoft.Base.DeviceDisplayObjects//DDO:%7B00000000-0000-0000-FFFF-FFFFFFFFFFFF%7D\cat{8AA6B0C2-14A6-4da8-BF36-F7D93ACE9ACE}
I want this application completely remove from the system and NOT just on a single profile. I call Lenovo Support here in Australia and the Tech claims that there's NO TELEPHONE SUPPORT available for this product. I am VERY frustrated considering that I recommend this product to be rolled out here in our company but I guess I have to re-think that again considering the SUPPORT is VERY POOR.

[Solved] stumpwm: how to get rid of newline using run-shell-command

Similar Messages

Maybe you are looking for