Some 10.4.x-Clients won´t log in to new or changed OD-acc on 10.3.9-Server

Hi,
strange problem here
Server: Xserve with 10.3.9 Server, OD-Master with Kerberos, homedirectories located on this server
Clients 35 Clients with 10.3.9 (only a few) and 10.4.9-10.4.11
All clients work fine, only two clients (PPC G5) have a problem to login to new or changed accounts (e. g. password was changed).
There was nothing changed on these machines, the error occured the first time, after we changed a password of a OD-User and added a new one
I checked everything, what is mentioned in the many discussions here.
These two clients with 10.4.11 (error also happend on 10.4.9 and 10.4.10) can´t log in these new/changed accounts.
The accounts work on every other machine here, so the accounts are ok.
I also can log in to the server from these clients (with these changed/new accounts), when logged in via a local admin-account (Kerberos-authentication).
Conclusion: The Kerberos-entries are ok, too.
I deleted and created new entries in DirectoryServices on the clients -> no change
I deleted the /Library/Preferences/DirectoryService-folder on the clients -> no change
I deleted all Cache-Folder (System/Library/Caches and Library/Caches) -> no change
I checked all Network-Preferences -> ok
I checked DNS-responds from the clients -> ok
I also tried the setting to use the LDAP-server distributed by the DHCP-Server (which is working on other clients I also tried this setting on) -> no change
All other clients work in the same setup (LDAP-manuall or automatically), all other clients accept new passwords and accounts instantly (no reboot required). The accounts are ok, the Kerberos-entries are ok.
These two mentioned clients have only one local administration-account, which is the same account, all clients have.
the passwords are "keyboard-layout-independent" (we have had some problems here some time ago, with clients using US-layout, even though the layout was set to German-layout at the LoginWindow (we are located in Germany).
Does anyone have an idea, what else to check?
Many thanks in advance
Regards
svenc

Hi,
an additional discovery I made:
Take the account "A", which is functioning on these two "problem-clients". I change the password from "123456" to "abcdef".
I try to log in this account with one of these two Macs... -> does NOT work
I try to log in this account with another Client (w/o problems) -> does work
I change the password back to "123456"
I try to log in this account with one of these two Macs -> does work
I deleted the accounts and created new ones. The accounts work fine on every Mac despite these two machines.
It looks like these two clients are not updating the directoryservice information.
So I tried to get a look, which information is readable at the client machines (which are making the trouble):
lookupd version 369.5 (root 2006.12.02 12:00:25 UTC)
Enter command name, "help", or "quit" to exit
userWithName: test
Dictionary: "DS: user test"
lookupagent: DSAgent
lookupvalidation: 1195423412
gid: 1025
home: /Network/Servers/xserve/Volumes/DATA/HomeDir/test
name: test testuser Test User
passwd: ****** ******
realname: Test User
shell: /bin/bash
uid: 1026
+ Category: user
+ Time to live: 43200
+ Age: 0 (expires in 43200 seconds)
+ Negative: No
+ Cache hits: 0
+ Retain count: 7
I gathered this information on the client, which can NOT log into this account. I can try all new or changed accounts, all are visible to the client....
Does anybody here unterstand this?
• the used accounts are all ok
• other accounts work fine on this two machines
• the problem only occurs on changed or new accounts.
• reverting the changed accounts to the old state: the accounts work again
Regards
svenc

Similar Messages

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

My ipad logs me out of every site if my screen turns off. It also clears all history. Even some of my email accounts won't let me send mail. Ever since the ios7 update, I am frustrated daily! How do I fix these problems?

CM 13 Web server version installed but won't log in

Just finished the CM web server install after carefully following the instructions for MS SQL 2005 and jboss app server.
Close to the end of the install it gave the error: The CM Admin Config utility failed.
Refer to the c:\Program Files\Oracle\ContractManagement\utility\CMAdminConfig\CMAdminCOnfig.log
But it still seemed to finish. I can get to the login page but the sa account won't log in. It gives me the "Internal Server Error" page.
Can I make additional accounts some other way without logging into the web page?
Here's the log.
Begin
com.microsoft.sqlserver.jdbc.SQLServerException: Cannot open database "EXPADMIN" requested by the login. The login failed.
     at com.microsoft.sqlserver.jdbc.SQLServerException.makeFromDatabaseError(SQLServerException.java:196)
     at com.microsoft.sqlserver.jdbc.TDSTokenHandler.onEOF(tdsparser.java:246)
     at com.microsoft.sqlserver.jdbc.TDSParser.parse(tdsparser.java:83)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.sendLogon(SQLServerConnection.java:2532)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.logon(SQLServerConnection.java:1929)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.access$000(SQLServerConnection.java:41)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection$LogonCommand.doExecute(SQLServerConnection.java:1917)
     at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:4026)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1416)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connectHelper(SQLServerConnection.java:1061)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.login(SQLServerConnection.java:833)
     at com.microsoft.sqlserver.jdbc.SQLServerConnection.connect(SQLServerConnection.java:716)
     at com.microsoft.sqlserver.jdbc.SQLServerDriver.connect(SQLServerDriver.java:841)
     at java.sql.DriverManager.getConnection(DriverManager.java:582)
     at java.sql.DriverManager.getConnection(DriverManager.java:185)
     at com.primavera.a.b.b.h(Unknown Source)
     at com.primavera.a.b.b.<init>(Unknown Source)
     at com.primavera.admintool.AdminApp.main(Unknown Source)
End
There must not be many gurus on this forum. I find it hard to believe I'm the only one with this problem. If anyone from Oracle is listening You can make a SALE if you offer some advice and help me get this working.
Thanks,
Budgen

do not install as a standalone on Windows 7!!! this is not supported.
some people have reporterd success using Windows 7 as a client, but Not as a server.
also currently many issues with Windows 7 and Office 2007 compatibility with PCM 13.
- after you installed MS SQL 2005 did you enable the tcp/ip port in SQL Configuration Manager? set it to port 1433 on Dynamic Ports in IPAll
- run dbconfig.cmd in location: c:\Program Files\Oracle\ContractManagement\utility\CMAdminConfig\
set the database connection to MS SQL, username will be exp and password sql
- run admin.cmd in same location: c:\Program Files\Oracle\ContractManagement\utility\CMAdminConfig\
ensure the database groups are setup correctly. You should have one Admin and atleast one group database folder
the usernames and passwords should be exp and sql in all the databases

Final Cut Server 1.5: G5 clients won't launch from icon

So I upgraded my client from FCServer 1.1.1 to 1.5. They have a mix of G5 and Mac Pro stations. The 4 Mac Pros are all working fine after some fiddling and Java cache deleting. The G5s, however, won't run the client launched from the saved icon.
Scenario:
Access the client download from (IP address)/finalcutserver in a web browser - this works.
The applet downloads and saves - this works.
SOMETIMES it asks where to save the app - sometimes works.
The client app runs, logs in, all working fine - great.
BUT...if you quit and try to relaunch from that icon, it doesn't work. Purged Java caches, emptied the cache in the client, etc. - nothing. Updated from 10.5.7 to 10.5.8, same problem.
The Intel boxes all work, none of the G5s do - seems entirely platform specific.
-mike

Heh... I solved this... in a manner of speaking. I really appreciate the input from Nicholas, Andy, RadUS, and everyone else, but nothing worked.
Weird. May be actually a Java problem, not a FCSvr problem, maybe something in the Java implementation of 10.5.7 and later. But who knows? No word on this from Apple. There's a surprise.
Here's the solution I ended up with. It's a cop-out I know, but it works!
My solution was to put the Final Cut Server.jnlp file on my desktop and just launch it from there. You can even make it look like the desktop app if you want. Here's how:
First you have to get the Final Cut Server.jnlp file on your desktop. It's not easy to find, because it's located in some weird temp directory somewhere buried in the recesses of the OS. If you don't know where it is, look through your browser's download history and find it. You can always redownload it by going to your server (yourserver.com/finalcutserver) and redownloading it. When you find it, move it to your desktop. Then do a Get Info on both the desktop app and jnlp file. Click on the icon for the app (the tray with the balls) and press Command C to copy the icon. Then click on the jnlp icon (the document with the cup of java) and press Command V to paste the FCSvr desktop app icon to the jnlp. Then check "hide extension" in the jnlp's get info window. Voila. You now have a "fake" desktop app. Yes, it's fake. Get over it! You won't be able to tell a difference. This is the only solution I came up with and I reinstalled Leopard twice.
Hope this helps others too!
Jason
Message was edited by: nylonoxygen77
Message was edited by: nylonoxygen77

Old clients won't switch from Self-Signed Certs to PKI.

Greetings.
I am wondering if anyone can give me advise on problem I am having with some of my sccm clients.
When I originally deployed SCCM i used self signed certs on clients.
We needed to add MAC and Linux support and MAC clients won't work without PKI, so I following this http://technet.microsoft.com/en-us/library/gg682023.aspx to configure Certificate Authority.
It all seemed work well, I can now join MAC client with auto-enroll and all machines are requesting client certificates and I had couple of machine with new push on windows site installed with PKI.
So right now I have about 250 windows clients, only 22 of them use PKI and the rest keeps using self-signed certs.
I foolishly switched main site settings, MP settings and DP point settings to use https only.
As a result I lost all self-signed clients and have full log for mpcontrol saying that it's rejecting clients cause they certificate cannot be validated.
I logged in to couple of those machines and MMC i can see that it did enroll machine with valid Client Cert but Configuration Manager client itself still saying that it's using self signed one.
Am I missing a step that I need to do to make sure that all those clients switch to PKI?

It is. but how can i redeploy them?
I was under impression auto push won't reinstall them. If i do deployment - that seem to reuse existing configuration and still use self signed on old machines.
How can i verify that it does push clients to machine that already have it correctly and start using new config and not reuse old one.
I even tried removing clients from couple of machines and see if it gets pushed again on them with proper config and those machines don't seem to get client but used to get it fine before. I keep getting new machines being added to domain and they get client
pushed to them, but anything that had client with self signed doesn't seem to be happy.

Novell client on Vista log-in problem.

(Netware 6.5) Installing a Vista pro with the latest Novell VISTA
client ( 1.0), I ran into problems. It's like the client won't browse
the tree and therefore can't log in. If I enter the server's IP
address in the tree field, it finds both the context and the server
right away. But after a reboot, that's gone again and you have to
enter the server IP manually again to log in?
This works fine on the XP clients in the same network. I have tried
to enter the server IP in the SLP scope list and add DHCP to the
protocol list - but that didn't make any difference.
It's like the NW naming disappears after each reboot.
Any suggestions?

these are the classic "slp is not configured correctly" symptoms...
slpinfo /all shows what?
and do you have the proper DA IP# and scope configured?
there are MANY threads discussing this in this group. search should
find them....
Cheers!
Richard Beels
~ Network Consultant
~ Sysop, Novell Support Connection
~ MCNE, CNE*, CNA*, CNS*, N*LS

MacBook pro, won't Log in, debugger called Panic comes up, and prompts me to restart, when re-started same issue occurs

You need to restart your computer,
My MacBook pro 17inch 8g ram i7 won't log in, it says "unable to find driver for this Platform" Debugger Called Panic
This keeps coming up after re-starting it.

If remote logins are not enabled, don't know how you can do it now if you can't login.
Do the "other" Macs see the problem Mac in the list of "Devices"?
From a Terminal window on another Mac, try this:
# assume IP address of problem mac is 192.168.99.10 and the username is xxx
ssh [email protected]
If you don't know the IP address, there might be a way to figure it out depending on your network setup.
If you get a prompt for the password then give it and it should log you in. If you get a "refused" message of some kind, then you can't login. Also you will get a prompt the first time you "ssh" in about adding the RSA key to your list of "known hosts".
If that doesn't work I'm at a loss. Have you tried booting safe mode? Have you tried Recovery Mode and verify disk? -- never mind just read where you've already done this. Do you have a bad GPU and it's causing the display to do bizarre things?

Some small bug is client

Client interface language in "Nederlands".
The text "To" for received emails and calendar objects is wrong, should be "aan" is now "t/m"
Just funny:
New message: Change the language check to none dutch and the gray text for "klik om een handtekening toe te voegen" is also marked as "wrong"
If language "language check" (still Dutch interface language) is set to english and a new email is created then the "...handtekening..." is not marked.
Problem with right-click.
On the "Bron van bericht" (external email) page.
When you want to kopie some of the text: Select the text, and then you have to right click twice before the menu is shown
Hans

Hans,
there are a couple of localization issues in GW2014, from what I can see.
If I were you, I'd open an SR and make sure it gets logged.
Uwe
Novell Knowledge Associate
Please don't send me support related e-mail unless I ask you to do so.

Lync 2010 Client won't start

The Lync 2010 client won't start.
Frequently the Lync 2010 client won't start. If you open up task manager you will see a back log of the Lync 2010 client, but the client won't open.

Agree with Georg.
I had the same problem.
End all Lync application tasks.
Then start Lync 2010 just for once.
Lisa Zheng
TechNet Community Support

MBP won't log out of user account

Hello,-
My MBP won't log out of my user account. It just sits at a white screen with the apple logo. I have to reboot it (several times) to get back
to my user accounts.
I have done a disk repair and it worked fine for 2 days then back to issue.
Any suggestions?

If you don't already have a current backup, back up all data before doing anything else. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve your problem. The backup is necessary on general principle, not because of anything suggested in this comment.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The procedure will help identify which such modifications you've installed, as well as some other aspects of the configuration that may be related to the problem.
Don’t be alarmed by the seeming complexity of these instructions — they’re easy to carry out. Here's a brief summary: In each of two steps, you copy a line of text from this web page into a window in another application. You wait about a minute. Then you paste some other text, which will have been copied automatically, back into a reply on this page. The sequence is copy; paste; paste again. That's all there is to it. Details follow.
While investigating the problem, you may have started the computer in "safe" mode. If possible, these steps should be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing. If you can only boot in safe mode, you can still use this procedure, but not all of it will work. Be sure to mention that in your reply, if you haven't already done so.
Below are instructions to enter UNIX shell commands. The commands are safe and do nothing but produce human-readable output, but they must be entered exactly as given in order to work. If you question the safety of the procedure suggested here — which you should — search this site for other discussions in which it’s been followed without any report of ill effects. I am not asking you to trust me. If you can't satisfy yourself that these instructions are safe, don't follow them.
The commands will line-wrap or scroll in your browser, but each one is really just a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. Step 1 should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click anywhere in the line of text below on this page to select it:
PB=/usr/libexec/PlistBuddy; PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n\n' "$1" "$o"; }; PF () { o=$($PB -c Print "$2" | awk -F'= ' \/$3'/{print $2}'); PR "$1"; }; { o=$(( $(vm_stat | awk '/Pageo/{sub("\\.",""); print $2}')/256 )); [[ $o -gt 1024 ]] && printf "\nPageouts: %s MiB\n\n" $o; o=$(kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1); PR "Loaded extrinsic kernel extensions"; o=$(launchctl list | sed 1d | awk '!/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'); PR "Loaded extrinsic user agents"; o=$(launchctl getenv DYLD_INSERT_LIBRARIES); PR "Inserted libraries"; o=$(crontab -l); PR "User cron tasks"; o=$(cat /e*/lau*); PR "Global launchd configuration"; o=$(cat ~/.lau*); PR "Per-user launchd configuration"; PF "Global login items" /L*/P*/loginw* Path; PF "Per-user login items" L*/P*/*loginit* Name; PF "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed 's/\..*$//;s/-[1-9]$//'; o=$(find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l); [[ $o -eq 0 ]] || printf "\nRestricted user files: %s\n\n" $o; cd; o=$(find -L /S*/L*/E* {,/}L*/{A*d,Compon,Ex,In,Keyb,Mail/Bu,P*P,Qu,Scripti,Servi,Spo}* -type d -name Contents -prune | while read d; do ID=$($PB -c 'Print :CFBundleIdentifier' "$d/Info.plist"); ID=${ID:-No bundle ID}; egrep -qv "^com\.apple\.[^x]|Accusys|ArcMSR|ATTO|HDPro|HighPoint|driver\.stex|hp-fax|JMicron|microsoft\.MDI|print|SoftRAID" <<< $ID && printf '%s\n\t(%s)\n' "${d%/Contents}" "$ID"; done); PR "Extrinsic loadable bundles"; o=$(find /u*/{,*/}lib -type f -exec sh -c 'file -b "$1" | grep -qw shared && ! codesign -v "$1"' {} {} \; -print); PR "Unsigned shared libraries"; for d in {,/}L*/{La,Priv,Sta}* L*/Fonts; do o=$(ls -A "$d"); PR "$d"; done; } 2> /dev/null | pbcopy; echo $'\nStep 1 done'
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting.
The command may take up to a few minutes to run, depending on how many files you have and the speed of the computer. Wait for the line "Step 1 done" to appear below what you entered. The output of the command will be automatically copied to the Clipboard. If the command produced no output, the Clipboard will be empty. Paste into a reply to this message. No typing is involved in this step.
Step 2
Remember that you must be logged in as an administrator for this step. Do as in Step 1 with this line:
PR () { [[ "$o" ]] && printf '\n%s:\n\n%s\n\n' "$1" "$o"; }; { o=$(sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|post[fg]|x)/{print $3}'); PR "Loaded extrinsic daemons"; o=$(sudo defaults read com.apple.loginwindow LoginHook); PR "Login hook"; o=$(sudo crontab -l); PR "Root cron tasks"; o=$(syslog -k Sender kernel -k Message CReq 'error|GPU |hfs: Ru|I/O e|find tok|n Cause: -|NVDA\(|pagin|timed? ?o' | tail -n25 | awk '/:/{$4=""; print}'); PR "Log check"; } 2> /dev/null | pbcopy; echo $'\nStep 2 done'
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
You can then quit Terminal.
To prevent confusion, I'll repeat: When you type your password in the Terminal window, you won't see what you're typing.
Note: If you don’t have a login password, set one before taking Step 2. If that’s not possible, skip the step.
Important: If any personal information, such as your name or email address, appears in the output of these commands, anonymize it before posting. Usually that won't be necessary.
Remember, Steps 1 and 2 are all copy-and-paste — type only your password. Also remember to post the output.

Some InDesign CS5.5 files won't open until force quit and relaunch the application (Mac) ?

Some InDesign CS5.5 files won't open until force quit and relaunch application (Mac). It seems that this occurs rarely, but once it does it on a file, it happes every time.
Any suggestions?

Is your Indesign updated to 7.5.2 ?
Where are these file saved on network or on your computer?
Are you using any font mangement software link suitcase fusion.?

How long does Cisco VPN client keeps its logs

Hi,
How long does the Cisco VPN client keeps its logs? It seems like 2 weeks. Is it right?

February 18, 2010
Due to popular demand, the Cisco VPN Client v5.0.7 open beta is now available!
In addition to serving as a general maintenance release, the Cisco VPN Client 5.0.7 beta is compatible with Windows 7 & Windows Vista 64-bit environments.
A 64-bit specific compatible image is available for installation on these platforms.
Please have communicate feedback (both positive and problems) to [email protected]
Key Capabilities available for Beta Testing:
New Platform support – Windows 7 & Windows Vista 64-bit platform compatibility
Software Access: http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=281940730 (under 5.BETA)
Software is available for download by any customer with a Cisco.com SMARTnet™ enabled login.
Release Notes will be available next week via a link once the download image is selected.
There are currently no plans to support Windows XP 64 bit in the VPN client.

Email client won't working

Hi..
I have a problem till yesterday with iphone 4 email client..it won't show me my new emails..I just see 1 new message like notification and when I go to see inbox it is not there .
Pleas help me to fix this problem.
All the best
Dusica.

Well I know recently Google has started locking accounts (well where they can check from) when they are checked on too often or from too many different places.
My wife couldn't check her email anymore from new locations) until it got unlocked.
https://www.google.com/accounts/DisplayUnlockCaptcha to unlock an account.
For me I check from work computer, home computer, and my iPhone (thus AT&T ip assigned while in this home area). Never had an issue until I went on travel to another state and thus AT&T gave another IP and presto, kept getting bad user name or password messages when trying to check mail. Once doing the unlock I could check again.
Not sure if Yahoo is doing the same.

IWeb's built in ftp client won't upload new files

iWeb's built in ftp client is mad at me, refusing to upload new files. No doubt because last Sunday I asked GoDaddy to change my domain name (same site, name changed). They did. Immediately nothing would upload. GoDaddy said "Well some FTPs are picky." Problems continued so I said OK, please change the domain name back to its previous name, and all would be put right again. I thought.
No so. iWeb's ftp client seems still offended for having been disturbed. I make a change. Save. Click Publish Site Changes. Get the window saying Content Rights. Click Continue. The blue line scrolls nicely, "Publishing will continue in the background" shows, then **"Your site has been published"**...
...but no changes or files have been uploaded. The old page is the same.
Looks like I permanently po'd iWeb’s ftp. Should I give up and rebuild my site in a new folder? Try Fetch?
I shouldn't have done that stupid thing last Sunday. Live and learn.
Help?

The root folder on the server is the top level one that you upload your files to.
You publish your website files to a local folder on your Mac. This produces an index.html file and a folder with the same name as your site in iWeb.
An FTP application transfers the files on your Mac to the root folder on the server using File Transfer Protocol.
Unlike Cyberduck, most shareware FTP applications will show both the files on your Mac and those on the server in the same window so its just a question of browsing to the folder containing your website files on your Mac and dragging them across to the icon of the root folder on your server. The application will take care of the rest.
The process really is just about as simple as dragging files from one folder on your Mac to another as long as you have the FTP application set up correctly.

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

I have been having issues with my iCloud email on my iMac. For some time period, everyday, it won't reload and often shows symbols instead of letters for the text. Any ideas how to solve?

All I can suggest is that you open that file on the MBA and save it as a new file, then see if you can open the new one on the iMac.

Some 10.4.x-Clients won´t log in to new or changed OD-acc on 10.3.9-Server

Similar Messages

Maybe you are looking for