Some doubts regarding APD

Hi Friends,
I am working on APD for the first time. While working on it, I came across the following doubts/questions:
1. If we have created a query as the source for APD and transactional ODS as target in Dev. Now, I want to transport this APD in QA. We dont transport queries from one environment to other and manually create them in each environment. Now my question is if we transport this APD in QA without transporting query with/before APD, will transport fail?
2. Is transactional ODS the only ODS we can use as target for APD? Regular ODS will not work with APD?
3. When we load data from APD to transactional ODS, does it always delete data before loading new data?
Any other relevant information related to APD would be highly appreciated.
I would appreciate you help in solving my doubts.
Thanks,
Amit

Hi Manmit,
1)The transport may not Fail if u transport the APD without the Query.But from where will u pull the data for APD.So transport the Query along with the APD.Alwasy maintain SYNC between DEV_QA_PRODUCTION.
2)Yes WE have to use trasactional DSO
always while loading data from APD.
3)Yes,It always deletes data and Load the FRESH data that comes through APD.Hence we use a STANDARD DSO on top of transactional ODS,,such that the deltas are captured in the STD DSO.
Check these Links
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90886731-21e4-2a10-2ebf-901c2c2b4e3d
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/96939c07-0901-0010-bf94-ac8b347dd541
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/96939c07-0901-0010-bf94-ac8b347dd541
http://help.sap.com/saphelp_nw2004s/helpdata/en/39/e45e42ae1fdc54e10000000a155106/frameset.htm
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000585703&
APD and T-ODS automation questions
Hello Info on APD
BW 3.5 APD Enhancements
http://help.sap.com/saphelp_nw04/helpdata/en/49/7e960481916448b20134d471d36a6b/frameset.htm
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/96939c07-0901-0010-bf94-ac8b347dd541
http://help.sap.com/saphelp_nw2004s/helpdata/en/39/e45e42ae1fdc54e10000000a155106/frameset.htm
https://websmp206.sap-ag.de/~form/sapnet?_SHORTKEY=01100035870000585703&
Rgds
SVU
Edited by: svu123 on Jul 26, 2009 6:39 AM

Similar Messages

Have some doubt regarding the weblog (Lookup's in XI made simpler)

Hi All,
I have created the same scenario as mentioned in Siva's weblog (Lookup's in XI made simpler).
I having some doubts regarding the scenario, it will be great if you help me to resolve the same.
I am having a file-file scenario where I need to do lookup in database(MS-Access) through mapping.
The standard file-file scenario is in place and in addition I have created a receiver jdbc channel . I have also created the receiver agreement for the same in the cofiguration.
While creating the receiver agreement you have to specify the interface name which includes the message typeI have specified the normal format which we specify while configuring the jdbc receiver adapter.
In the message mapping I have created a advance user defined function as mentioned in your weblog which calls my receiver jdbc channel.
I have also specified the select query to be executed in the mapping program.
While testing I am getting the following error
Cannot produce target element /ns0:Role_MT/URole. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
<b>Can you please suggest me what all I need to do in addition to the file-file scenario for this lookup scenario to work.</b>
Thanks and Regards
Rahul

Hi,
Following is my user defined function
//write your code here
String Query = "";
Channel channel = null;
DataBaseAccessor accessor = null;
DataBaseResult resultSet = null;
Query = "Select URole from Lookup where UName = ' " + UName[0] + " ' and UPassword = ' " + Pwd[0] +" ' ";
try{
channel = LookupService.getChannel("DB_service","JDBC_channel_receiver");
accessor = LookupService.getDataBaseAccessor(channel);
resultSet = accessor.execute(Query);
for(Iterator rows = resultSet.getRows();rows.hasNext();){
Map rowMap = (Map)rows.next();
result.addValue((String)rowMap.get("URole"));
catch(Exception ex){
result.addValue(ex.getMessage());
finally{
try{
if (accessor!= null) accessor.close();
catch(Exception ex){
result.addValue(ex.getMessage());
Thanks and Regards
Rahul

Some doubts regarding sorcing cockpit in EBP

Hi all,
This is sankar bhatta , working in IBM . I am new to the EBP module. I got few doubts regarding the sourcing cockpit.
When a shopping cart comes to the sourcing cockpit of the purchaser. I mean in what cases??
i am listing some of the cases where i have doubts.
1) A user creates a SC , but he doesn't assign any vendors. in that case it comes to the sourcing cockpit of the Purchase . is it right??
2)A user created a shopping cart ( with more than one item) without vendor and it has gone to SOCO of purchaser . he has assigned the vendor and orders it. the PO is created in the Backend. now because of some reason ( for example the vendor is not able to supply the item ) the purchase deletes one item from the PO in EB. In this case is the SC comes again to SOCO of the Purchaser???
3) the user created the SC without vendor.The SC goes to the SOCO of the purchaser. The SC is in approval process. Now the user deletes one item and orders it again. In this case whether the SC goes to the SOCO again???
4) User created a SC ( with more than one item) and approval is over. PO is created in the backend. Now, if the user or somebody who has the authorisation deletes the item in SC , does the SC goes to the SOCO of the purchaser??
5)According to SAp standard functionallity, PO can be deleted only by one in purcasing organisation. Is this person person csn be a purchaser (or) some other person in the Purchasing organisation??
Please answer these questions and if you know any other case where a SC comes to the SOCO of the Purcher please include that also.
Thanks and regards
Sankar Rao Bhatta.

Hi Sankara,
The Sourcing cockpit is much more simple than that. Your questions show you'rre very confused in this.
There is only one customizing point used : SAP Reference IMG -> SAP Implementation Guide -> Supplier Relationship Management -> SRM Server -> Sourcing -> Define Sourcing for Product Categories
If Sourcing for Product Categories is not configured, the system creates purchase orders in the local scenario for all requirements; these are incomplete if the source of supply is missing. If you require additional control options, for example, the facility to control processing at product level, you can use the following BAdI: Define Execution of Sourcing.
The diferent options you have in the customizing point are:
-Sourcing is never carried out: This is the default setting. Enterprise Buyer does not transfer any items to the purchaser's sourcing application ¨C independent of the status of the shopping cart.
-Sourcing is always carried out: Enterprise Buyer transfers each item to Sourcing ¨C independent of the status of the shopping cart.
-Sourcing is carried out for items without a source of supply: Enterprise Buyer transfers all requirements that have multiple sources of supply of which none is assigned, or if there is no source of supply for the requirement, to Sourcing.
-Automatic requirement grouping; sourcing for items without assigned source of supply:
If a source of supply is assigned to a requirement, the report BBP_SC_TRANSFER_GROUPED automatically groups requirements together for the creation of a PO. If the requirement does not have a source of supply, it appears in the work list of the sourcing application for manual assignment. Once you have assigned a source of supply, you can submit the requirement to the report.
-Automatic grouping; sourcing is never carried out: If a source of supply is assigned to a requirement, the report BBP_SC_TRANSFER_GROUPED automatically groups requirements together for the creation of a PO. If the requirement does not have a source of supply, an incomplete PO is created.
-Automatic bid invitation for items without a source of supply: Enterprise Buyer creates a bid invitation for all requirements that do not have any source of supply.
So for your questions:
1)depending on your customizing, this SC will lead to:
-Backend PR (classic scenario)
-Local incomplete PO (standalone or extended classic without soircing)
-Requirement in the Sourcing cockpit (if customized)
2)The modification of a PO will never change the initial document (SC and/or requirement), nothing 'comes back' into the sourcing cockpit
3)If you customized the sourcink cockpit, the SC line goes into it only after the approval process
4)This has nothing to do with the sourcing cockpit
5)The POs can be deleted by people who have correct authorizations (that is purchasers of the document purch. org. in standard). Be careful the POs cannot be deleted as soon as they have been edited (as of R/3).
Regards.
Vadim
PS: Please don't forget to reward points for helpful answers on your threads.

Some doubts regarding project

Hi,
i was asked these questions in the recent interviw. plz help to find out the answers.
1. how many source systems do u use? what r they?
2. what is ur daily job ?
i told, job monitoring, solving tickets assigned to me.( correct or add some points to me).
3. how many loads u monitor daily? mastrer data & transaction data?
i said 4 m.d , 3 t.d ( give me details regarding this.)
4. how much time it will take to finsh m.d load?
5. use of t- code sm37?
6. what does SLA contain?
7. how does the users raise tickets?
i said thru remedy s/w tool, he asked me that user does not know the error type( whether it is trfc or no sid etc..), how does he convey?
8. members in offshore? onsite?
PLZ provide me the answers if possible with explanation, as i need it very much.
my mailid: [email protected]
Thanq,
Madhavi.

Hi Madhavi,
1.Depends on the project usually R/3,Myself source system(BW),flatfile etc..
2.For daiy activities in production support please check the following threads and the threads inside it.
Re: production support issues
Re: BI Tasks
3.This also depends,ranges between 30-60 depends on the project
5.SM37 is tcode to monitor back ground processes which are scheduled in the background whether there are any cancelled,failed or successful processes.
6.SLA-Service Level Agreement.
Hope this helps!
Thanks
Chandru

Some doubt regarding oracle 9i lite

Hai,
I am doing R @ D on 9i lite. My scenario is as follows,
1. first i installed oracle 8i 8.1.7 database.
2. using oracle 9i lite 5.0.2 setup, In another machine instllaing mobile server and mobile development kit.
3. how to synchronize the 9i lite database with my 8i database.
My scenario is i need to create a standalone mobile server environment.
help me.

Your environment is older versions than we use, but the basic process for creating oracle lite client databases synchronised with the main server database is as follows
1) install the mobile server following the installation guide.
This will create the mobile server repository (schema MOBILEADMIN) and application on the app server or standalone. For production the repository data would normally be a seperate schema in the main database, and the mobile application running on one of the app servers
2) next you need to create your 'application'.
This consists of defining the tables or views from the main system you want to be able to synchronise with the offline clients. If you are just starting, the easiest way is to use the wtgpack wizard that comes as a part of the development kit. Start this up, create an application name, specify the client environment it will be going to (eg: WIN 32 or PPC2003) do the connection to the main server schema, select a table from the main system you want to synchronise, and take it through to publish
For the first go to see it working i would advise keeping it simple and just picking a small table, and set the refresh option to complete, with server wins in the conflict resolution. Once you have got things working, you can then go back and add other tables and start to look at using thre data subsetting to select only data relevant to a particular client, fast refresh options, and using views from the main system as the basis for the snapshots (in 5.0.2 i would avoid sequences)
3) when the application is published, start up the mobile manager tool
you should now be able to see the application you created, and the publication items (the tables that will be synchrionised). You now need to go to users and create a user and associate them with the application
4) set up client device
on a device of the type you want to synchrionse with (we use PDAs), go into IE, and enter the mobile server URL/webtogo/setup. This will give a list of the downloadable clients. Pick the appropriate one and follow the install instructions, using the user/password set up above
5) synchronise
on the client device run the msync utility. This will ask you for the user name/password and the server url, enter these and press the sync button and two datyabase files (.odb) should be created on the client - a control one concli, and one with the same name as your application. The client set up should have also installed a utility msql that you can use to look at the new local database

Some doubts regarding queries

what is optimizing technique in abap programming?
what is the meaning of this below query?
why they using check syntax? i am begineer of abap please give solution.
SELECT * FROM SBOOK. CHECK: SBOOK-CARRID = u2018LHu2019 AND SBOOK-CONNID = u20190400u2032. ENDSELECT.
whether the above thing is used or not ?
or we can use
SELECT * FROM <TABLE> WHERE <CONDITION>
ENDSELECT
Edited by: thayuman on Feb 19, 2012 11:03 AM

please answer i am unable to find solution because whether its possible use that queries with check syntax?

Some doubts in BW3.5

<Moderator Message: Please read the rules of engagement. You should not post multiple questions to one thread, also use meaningful subjects. And don't offer points.>
HELLO Guys
I have some doubts regarding SAP BW3.5...cAN anyone please clarify.
1.this is regarding SID Concept.
iIn extended start schema,there will be one fact table connected to many dimendion tables.Fact table and Dim tables are connected by dimension IDs.then this Dim table will hold various characteristics.every characteristic will store the characteristic value and address(pointer) to SID table.This SID table will hold again addresses(pointers) to attributes,text and hierarchy tables(if we assume that characteristic have attribute,text,hierarchy) which in turn contain the values.When a query is executed,the OLAP processor searches first for characteristics in dim tables and then with help of dim IDs traces Transaction Data in Fact table relevant for this combination of characteristics and gives output.Did I understand the concept right?
how does OLAP Processor run if the query is on just text of a characteristic and it doesnot include this characteristic?
2.how does navigational attr decrease the performance?
3.cAN YOU ASSIGN
    a. many datasources to one infosource
    b.one datasource to many infosources
    c.many datasources to many infosources...
can you please give real time scenarios for this....
4.how do SID concept improve BW/BI.
thanks
Surekha Chand
Edited by: SChandx200 on Jul 2, 2009 7:35 AM
Edited by: SChandx200 on Jul 2, 2009 7:37 AM
Edited by: Siegfried Szameitat on Jul 2, 2009 1:09 PM

Hi,
You understanding is correct.
{code)
how does OLAP Processor run if the query is on just text of a characteristic and it doesnot include this characteristic?
{code}
This question of yours is not very clear. Re phrase and post it again.
2.how does navigational attr decrease the performance?
Ans:- Say for example in the customer master table customer phone no is the navigational attribute. Now when you select this navigation attriubte in your report then the processor will go and first check the value of Customer say C1 and then determine C1 phone number. Now this look up of cusotmer will happen for every customer . So if say there are huge number of records for which this look up of customer first has to happen then obviously the performance will be impacted.
Hope it is clear.

Doubt regarding ALE SETTINGS in IDOC scenario.

Hi Friends,
        I have some doubts regarding ALE settings for IDOC scenarios, can anyone please clarify my doubts.
For exmaple take IDOC to FILE scenario
The knowledge i got from SDN is --
One need to do at the R3 side is --- RFC DESTINATION (SM59) for the XI system.
                                                   --- TRFC PORT for sending IDOC to the XI system
                                                   --- CREATING LOGICAL SYSTEM
                                                   --- CREATING PARTNER PROFILE
               at the XI side is --- RFC Destination ( For SAP sender system)
                                       --- CREATING PORT for receiving IDOC from the SAP sending system(IDX1).
1. Do we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself or in XI system or in both systems we create these logical systems? Is this a mandatory step in doing ALE configurations?
In IDOC to IDOC scenario-------
2. Do we craete two RFC destinations in XI system? One RFC DESTINATION for the Sender R3 system and another RFC DESTINATION for the Receiver R3 System? and do we create RFC DESTINATION for the XI system in receiver R3 system? If not.....y we don't create like this........Please give me some clarity on this.............
3. If we use IDOC adapter ,since IDOC adapter resides on the ABAP STACK ,we don't need sender communication channel ,for the similar reason----
y we r creating receiver communication channel in the case of FILE to IDOC scenario?
4. Can any one please provide me the ALE settings for IDOC to FILE scenario,
                                                                                FILE to IDOC scenario,
IDOC to IDOC scenario individually.
Thanks in advance.
Regards,
Ramana.

hi,
1. Yes, we create two logical systems for both Sender ( R3 system ) and Receiver( XI system ) in R3 system itself and
it is a mandatory step in doing ALE configurations
2. We create 1 RFC destination each in R3 and XI.
    R3 RFC destination points to Xi and
    XI RFC destination points to R3
3 We need to create Communication Channel for Idoc receiver as the receiver channel is always required but sender may not be necessary
4. ALE settings for all IDOC scenarios are same as follows....
Steps for ALE settings:-
Steps for XI
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the R3 system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto IDX1.
     Create a new port.
     Give the port name.
     Give the client number for the R3 system.
     Select the created Rfc Destination.
Step 3)
     Goto IDX2
     Create a new Meta data.
     Give the Idoc type.
     Select the created port.
Steps for R3.
Step 1)
     Goto SM59.
     Create new RFC destination of type 3(Abap connection).
     Give a suitable name and description.
     Give the Ip address of the XI system.
     Give the system number.
     Give the gateway host name and gateway service (3300 + system number).
     Go to the logon security tab.
     Give the lang, client, username and password.
     Test connection and remote logon.
Step 2)
     Goto WE21.
     Create a port under transactional RFC.(R3->XI)
     Designate the RFC destination created in prev step.
Step 3)
     Goto SALE.
     Basic settings->Logical Systems->Define logical system.
     Create two logical systems(one for XI and the other for R3)
     Basic settings->Logical Systems->Assign logical system.
     Assign the R3 logical system to respective client.
Step 4)
     Goto WE20.
     Partner type LS.
     Create two partner profile(one for XI the other for R3).
     Give the outbound or inbound message type based on the direction.
Step 5)
     Goto WE19
     Give the basic type and execute.
     fill in the required fields.
     Goto IDOC->edit control records.
     Give the following values.(Receiver port,partner no.,part type and sender Partner no. and type)
     Click outbound processing.
Step 6)
     Go to SM58
     if there are any messages then there is some error in execution.
     Goto WE02.
     Check the status of the IDOC.
     Goto WE47.
     TO decode the status code.
Step 7)
     Not mandatory.
     Goto BD64.
     Click on Create model view.
     Add message type.
BD87 to check the status of IDOC.
In case if not authorized then go to the target system and check in SU53, see for the missing object
and assign it to the user.
SAP r3
sm59(status check)(no message)
WE02(status check)
WE05(status check)
BD87(status check)
Xi
IDx5(Idoc check)
SU53(authorization check)
Reward points if helpful
Prashant

Doubt Regarding validation of IDOCS

Hi Gurus,
I have some doubts regarding IDOCS.
1. If we are sending a IDOC from XI to R/3, where does we do validations from R/3 side and how do we do that. Suppose if we are sending a Purchase order IDOC form XI to R/3, how to do validations for that particular IDOC for PO number and some other fields from R/3 side.
2. Do we need to do validations in a aABAP Program.
please clarify me these Questions. Thanks in advance..
santosh.

Hi Santhosh,
If you want to do any validations in ur IDOC,then from XI just push the IDOC,dont post it.
(ie)Send the IDOC from XI in status 64 :IDoc ready to be transferred to application.
Once R/3 Received this status then thru your ABAP progream just get this IDOC no: and do the validations then Post the IDOC manually.
Thanks.
Note:Reward Points if you find useful.

Doubts regarding XML Form Builder

Hi All,
I am having some doubts regarding XML Forms (Projects) that is created using XML Form Builder. Where are exactly these projects stored. Can I edit these projects and add my own Java Functionality in these. And also the data which I fill using these project where is it stored. Suppose New Project I ve created using XML Form Builder, now I want to feed in the news. Where exactly are these news stored.
Thanks in Advance
Anish

Hi Anish
You can make the standard settings and modify the XML forms builder in line with your requirements in the options. You can set the standard paths for your project on the <b>Paths</b> tab page.
To get a clear understanding, please go through this link.
http://help.sap.com/saphelp_erp2004/helpdata/en/62/ca6f365a6df84e87ba085f9b5fb350/content.htm
Hope that was helpful
Warm Regards
Priya

Doubts regarding WAN Network sizing formula parameters

Hi
We have used the following SAP document - Front end requirements for SAP Business solutions
We have some doubts regarding the formula. Sometime we have the feeling it does not address very well issues as user's concurrency, WAN Optimization and contingency. However, it might be only that we are not using correctly the formula, so we would like to confirm some information regarding the parameters.
C = X * N * D * 0.25
The parameters are as follows:
C: Bandwidth in kbps that is needed for the SAP GUI
X: Amount of data per dialog step in kilo bytes
N: Number of active users (independent of the number of sessions)
D: Average number of dialog steps per minute per user7
Numerical factor: ~0.25 = 8 (kb/kilo bytes ) * 1.25 (protocol overhead) * 1/60 (min/s) * safety factor
1.58 (response time, peak load, different technologies)
The number of active user is the average number of concurrent users (from the total number of users) which are using the network? Therefore, we should calculate first the concurrent users number?
Does any body knows what is the reasoning behind the Numerical Factor and the safety factor? It is a contingency factor? It is related with a network bandwidth contingency?
Has anyone apply WAN Optimization?
Has anyone apply any additional contingency measure additional to the safety factor?
Kind regards
Gonzalo Pérez-Prim

Hi Gonzalo,
As you said, the number of active users is the mean number of concurrent users, since idle users don't normally need bandwidth.
I think that safety factor is an estimated number provided by SAP engineers to increase the final amount, just in case you have different issues that could lead to a lower network transmission rate. As it's a general estimation, please take into account that the particular issues of your network can have some influence in the speed calculation.
Please take into account that maybe you want to switch the option "slow network connection" in SAPGUI, just to decrease the ammount of traffic between frontends and server.
Hope this helps
Best Regards
Francisco

Doubts regarding the CTTYP field after a PU12 run

Hi Everyone,
I had some doubts regarding PU12. When I maintain the IT16 data for an employee belonging to Employee Group/Subgroup E/52, I want to keep the contract type blank. However, when I do this, CTTYP is not sent through in the IDoc after PU12 processing. I would like to know if this is standard behaviour. (If it is maintained as say unlimited contract, the field is sent through with the value 01) If I would like to send CTTYP through as 00, can I do it? Would I have to maintain a conversion? As of now, this field is configured as a key field in my system.
Regards,
Alpana.

I presume that you cave a template for your documents with unsigned signature fields. Add a text filed (or other field type that you wish to use) to this template. Then you will be able to fill in this field after signing.

Doubts regarding RRI

Hello Friends,
I have some doubts regarding RRI, please go through below questions.
I have 2 queries 1. sales report 2. Sales report world
I have built a jump target in RSBBS by giving sender and receiver details
In sales report I have the following data, my useer requirement is If he select one material -> right click -> goto -> jump to world report, then he wants to see the data for only that particular material , bu in my case it is showing for all the materials which are in 1st query.
Material--Dist Channel-Month
098647A639          G2     201002
098647A781          G2     200909
0265231927          G2     200901
0986479560          G2     200912
0204011474          G2     200912
098647A711          G2     201002
098647B772          G2     200909
0986473371          G2     200901
0265216627          G2     200901
1987482222          G2     200901
1987482202          G2     200901

Hi,
I have same requirement, I achieved by selecting go to on the respective company, Sales document (in my case). I have done no settings in assignment details.
I have another RRI requirement.
When we are in the report for Invoice, when we click on the Billing Document, It should go to transaction "VF03" in R/3.
I can able to achieve (we have SSO logon configured).
My requirement is when we select goto VF03, it should go to the respective billing document on which we right clicked, now i'ts displaying only VF03 transaction. It should display display of the respective Billing Document.
Can anyone help to resolve the issue?
Thanks in advance,
Venky

Doubts regarding CUBE

Hi all
I have some doubts regarding CUBE . If i get sip trunking from a service provider and i use a CUBE router to distribute those sip trunk to customers who are using IP pbx for there ip phones to connect .
As i know CUBE helps in ip to ip communication so does in this scenario i need a cucm anywhere ?
or a cme router ?
i got to know that i need a dsp resource in cube router so to avoid any mismatch of codecs.
Please guide me to clear my basics or you can provide me with any document to read.
Regards
Aateek

Hi Aateek,
You can start by checking the following links
http://docwiki.cisco.com/wiki/Cisco_Unified_Border_Element_SIP_Trunk_Configuration_Example
http://www.cisco.com/c/en/us/products/collateral/unified-communications/unified-border-element/white_paper_c11-620461.html
HTH
Manish

Some doubts in Workflow

HI Gurus ,
I have some doubt in workflow basically I know how to use them but i don't know what is functionality ,
could you plz explain me , else suggest me
1. why we have to do delegation , what happens at run time if we don't do delegation
2. What is the diff between task and workitem
Thanks
Prasad

Hello,
I would suggest searching for "sap workflow" on the internet, buying a SAP workflow book and/or taking a SAP workflow course.
regards
Rick Bakker
Hanabi Technology

Some doubts regarding APD

Similar Messages

Maybe you are looking for