Some Openfire/XMPP/Google Talk questions regarding SRV records

I'm trying to get my domain to have the correct SRV records so I can use my personal XMPP server to communicate to others using Google Talk. However, after I set up the SRV records correctly, when trying to connect to my XMPP server with SSL, it states that my certificate is for talk.google.com. Not really sure what's going on here... how does this work?
For the record, this is what I'm talking about: http://support.google.com/a/bin/answer. … swer=34143

The article you are referring to describes setup for Google Apps users; as you have your own server, it does not apply. Create records pointing at your server instead, as in http://wiki.xmpp.org/web/SRV_Records#XMPP_SRV_records.

Similar Messages

Some of my google talk contacts are not visible in the online list.

Hello!
I have problems with some of my google talk contacts.
When they are offline - I can see them in the contact list (in offline group).
But when they are arrived online they disappear from the contact list. Thus I can't find them neither among online people, nor among offline. But I still can chat with them.
What can be wrong with the iChat?
Tiger 10.4.11, iChat AV 3.1.9 (v446)
Message was edited by: leon.b

Hi,
I have seen this in a post before.
Unfortunately I can not remember of the top of my head what the issue turned out to be.
iChat can not turn the Jabber Buddy List to Invisible but that does not mean other clients can't. However you seem to think this is not the case.
A search here for Disappearing Buddies is likely to turn up all the AIM issue threads.
Are you using the Googlemail Web page at the same ?
I seem to remember I had an issue when I did this.
I would be tempted to delete com.apple.ichat.Jabber.plist and restart iChat to get the Login to Reset which may reset Flags on your Buddy List or your account info at GoogleTalk.
10:13 PM Thursday; June 26, 2008

Cisco Unity 7 Problem in Message Store Wiard. Showing some SRV Records Missing in DNS Table. Please suggest and help on this matter.

Installed Cisco Unity 7 on Windows Server 2000 and Unity Server is on Domain,and Exchange we are using is Exhcnage 2007. When we reach at Message Store Wizard it is showing some error at the end that " Failed reaching for Unity in Active Directory Global Catalog. The SVR Record may be missing in DNS Table" . It shows when we slected Exchange in Process and the Selected Storage Group. And the it takes time and then shows error. Please try to resolve this issue soon, we need this solution urgently. We have already spent several days on different issues regarding Unity.
If you need to talk regarding this matter, Please contact on +919780660619, and the conatct person name is Manav.
Thanks in Advance
Rosy

Rosy,
We cannot call you from this forum. If you truly need a call, you can open a TAC case. The info I can tell you is that you need to fix this in your dns. A simple google search of "no SRV record Windows 2000 server" comes up with numerous resources that can help you fix this. Here is just one example.
http://support.microsoft.com/kb/241505
and
http://www.petri.co.il/active_directory_srv_records.htm
I would also advise you, if you are doing a new install with Unity 7 and that version of Exchange, that you use Windows 2003 as the OS. Even MS doesn't support Windows 2000 Server any more so if you end up having an OS issue on your Unity server, we will not be able to get MS to help you. From a support perspective, I would advise you to use Windows 2003 Server in this implimentation.
Thanks!
Tray

Few questions about the recording

Hi,
I'm intersting in adding recording/playback option to my webcam application and i have few questions regarding the recording functionality:
1. My webcam app is using P2P connection, will the recording stop my P2P?
2. Will the recording create some latency in the audio/video?
3. can i change the quality of the recording?
4. is there away to encrypt the archived zip file?
Thanks,
Tzahi

1) yes, currently recording is always hub&spoke (and we don't have a real plan to support recording with p2p since it would require a substantial amount of changes in the server-side application)
2) no, recording is independent from streaming
3) no - I believe recordings are stored at the quality they are streamed. In theory you could re-encode audio and video stream to a lower quality for playback and repackage the zip file (assuming re-encoding the stream doesn't change the internal timestamps)
4) currently not. We are simply using the "zip" command (on *nix) to archive the files so in theory we could add the password/encryption option but that would require for you to store the required password on our servers and for us to pass it on the command-line making the process not very secure anyway.
Any specific reason to keep your archives on your servers encrypted ?

I have some questions regarding setting up a software RAID 0 on a Mac Pro

I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
I should be most grateful to receive advice regarding the following questions:
QUESTION 1:
I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
Or would I have to reinstall the OS, applications and software again?
I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
QUESTION 2:
I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
QUESTION 3:
Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
Or would this not be of any use anyway, in the event of a single drive failure?
QUESTION 4:
Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
QUESTION 5:
If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

Well said.
Steps to set up RAID
Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
1. Open Disk Utility (/Applications/Utilities).
2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
4. Name the RAID set.
5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
6. Click Create.
Recovering from a hard drive failure on a mirrored array
1. Open Disk Utility in (/Applications/Utilities).
2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
3. If an issue with the disk is indicated, click Rebuild.
4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
5. Repeat steps 1 and 2.
6. Drag the icon of the new disk on top of that of the removed disk.
7. Click Rebuild.
http://support.apple.com/kb/HT2559
Drive A + B = VOLUME ONE
Drive C + D = VOLUME TWO
What you put on those volumes is of course up to you and easy to do.
A system really only needs to be backed up "as needed" like before you add or update or install anything.
/Users can be backed up hourly, daily, weekly schedule
Media files as needed.
Things that hurt performance:
Page outs
Spotlight - disable this for boot drive and 'scratch'
SCRATCH: Temporary space; erased between projects and steps.
http://en.wikipedia.org/wiki/StandardRAIDlevels
(normally I'd link to Wikipedia but I can't load right now)
Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
To help understand and configure your 2009 Nehalem Mac Pro:
http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
http://macperformanceguide.com/
http://www.macgurus.com/guides/storageaccelguide.php
http://www.macintouch.com/readerreports/harddrives/index.html
http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
http://kb2.adobe.com/cps/404/kb404440.html

Some questions regarding CO-PA

Hello Experts,
I have some questions regarding de COPA module:
1-Where can i find wich G/L accounts are assigned to a especific condition type? Is there any transaction where i can check the g/l accounts for the condition types?
2-I heard that the condition type VPRS is statistical, can anyone explain me this concept?..wich accounts are assigned to this condition type?
3-Does anyone has a list of the most relevat transactions for COPA? especially regarding the value flows and the closing.
Thnak you for your support!
Leandro.

Hi,
a) VKOA transaction
b) try reading this one: http://help.sap.com/erp2005_ehp_04/helpdata/EN/40/c52df80d1e11d2b5cf0000e82de856/frameset.htm Statistical means that the value in the CO-PA document for VPRS is also updated (truly) in other CO component. For example, revenue could be assigned truly to CO-PA segment and statistically to, let's say, cost centre. With material costs - it's the opposite.
c) most of the data is flowing to CO-PA from other modules. However, just go to the standard menu: the transactions for CO-PA are not so many.
Regards,
Eli

Some simple questions regarding the Xcode.

I have some preliminary questions regarding the Xcode (objective C):
What is the difference between the programming files followed by .h and .m?
What does an asterisk * followed by a text mean (i.e. *window;)?
Is there any source that briefly explains the most common codes with examples (nsstring, nsarray, iboutlet, inaction.....etc)?
Any other tips will be highly appreciated.
Many thanks.

Xcode is the IDE.
Objective-C is the most common language used within Xcode.
UIWindow *window ..... the * means return the address of the instance variable 'window'.
An * is called a pointer to a variable.
Everything you need is explained here: https://developer.apple.com

Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

Hi !
Sir I have some questions regarding word report generation using(C language in labwindows) Please.
1.How can i add border to a word page?.
2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
3.How can i fill a cell of word report table withe the data type other than "character"?.
And sir one question about use of timer in cvi labwindows please.
Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
Regards
Imran
Pakistan
Solved!
Go to Solution.

Hello sir!
Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is involved i,m just trying to achieve minimum time interval of 1millisecond.
Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
And sir also waiting for your kind reply regarding word report generation.
Thanks.
Imran.
Attachments:
screen_shot_rigistry.docx ‏65 KB

Some question regarding time evaluation

Hello,
I have two questions regarding time evaluation:
1. Is it possible (if yes, how) to still include a employee in time evaluation even if this employee is inactive (status P0000-STAT2 = 0). We need this in order to calculate weeks of not working (this has to be calculated). I know that for payroll this is possible wih a setting in infotype 0003.
2. Is it possible (and how) to read data back from payroll into time. For example in payroll you export something to ZL table, can you then pick this up in time evaluation schema, as there is also ZL table. Or is there another way to do this?
Thanks for you answers,
Liesbeth

hi Schrage
Why you want to evaluate the time for inactive person.
If you want you can do.
Process :
First of all you have to group your employees. and sub groups.( for inactive emp)
Assign the employee sub group grouping for PCR in Basic Pay ( IMG ).
Then come to Time Evaluation Schema. Put the Day grouping nn nn nn nn in the Parameters. and run the time evaluation. You will get the output in DZL table.
For the above process you need to configure the T510S table.
Yes you can read the payroll into time.
the same concept will run in both of the modules.
the output should appear in the ZL table only.
Here the concept is.....Some companies, they will not use the payroll wage types. only they will use the time wage types.. these wage types has to be configure in the T510S. and we have to do the wage type copying from the part of time management only if they are not using the payroll. So either in Payroll or in Time management the evaluation of time willbe the same.
Cheers
Vijai

Some question regarding requirements in context of SAP XI

Hello!
I have few questions regarding Relational Database, Network Archtecture and Platform Support requirements in context of SAP XI. Can someone help by answering the questions, if possible with Yes/No (and short explanation)
<b>a) Does your system run native to the Oracle 10g RDBMS (RAC) and database tools? If not, please explain the databases and tools supported (Yes/No)
b) database accept binary-large-objects (BLOBs) and be referenced via the relational engine (Yes/No)
c) Deployable without using any fixed IP addresses (taking advantage of DHCP address resolution) (Yes/No)
d)software supported on HP-UX 11.i V2 (r6) on Itanium. (Yes/No)
e) Software supported on OS clustered servers (If mutliple products, please indicate if all are support or list areas where clustering may not be recommended and why) (Yes/No)</b>
Thank you very much!
Regards
A. Henke

Hi Axel,
I've just found your question by accident and would like to know whether you have already implemented 10gRAC in SAP environment?
regards
Barthez

Getting Truphone to work with Google Talk to make a free call

I'm trying to make a free call from my iPhone to my home computer using Truphone.
I installed Truphone on my iPhone and I have a Google Talk account on my Mac using Jabber in iChat. I'm trying to get the two the communicate with each other to make a phone call. Truphone requires me to call Google Talk using this number/code: [email protected] to invite it to engage in a phone call with the iPhone. Once the invite is accepted, then it will work - it says. Problem is that i cannot add this letters ([email protected]) on my iPhone to the mobile number field, only numbers. I am able to do it on my Mac and sync it to my iPhone, but for some reason the @ symbol gets dropped out of it and it won't work otherwise.
Has anyone had this same issue and was able to get it to work? Or...has anyone been able to get Truphone to be able to call their Mac using wifi to make a free call?

I sent a question to Truphone regarding this issue and this was their response. Bummer.
Dear K D,
Unfortunately it is not currently possible to dial SIP addresses
([email protected]) using the Truphone iPhone client. This includes calling
Google Talk addresses.
The Truphone service for the iPhone is an outbound calling solution. When
you're connected to Truphone you're able to make cheap Truphone calls over the
Internet. Please note that inbound calls will be received via your mobile/cell
network and not via Truphone.
New Truphone accounts for the iPhone won’t be assigned a separate Truphone
number. Instead your outgoing caller id will be presented as your
mobile/cellular number that you entered during the installation process.
Calls to other Truphone users who are using Nokia devices are free when both
parties are online.
If you have any further queries please reply to this email for assistance.
Regards,
The Truphone Support Team
Truphone
2 More London Riverside
London
SE1 2JR
UK
Web: www.truphone.com
Email: [email protected]

Questions regarding customisation/configuration of PS CS4

Hello
I have accumulated a list of questions regarding customising certain things in Photoshop. I don't know if these things are doable and if so, how.
Can I make it so that the list of blending options for a layer is by default collapsed when you first apply any options?
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions

NyanPrime wrote:
<answered above>
Can I make it possible to move the canvas even though I'm not zoomed in enough to only have parts of it visible on my screen?
Is it possible to enable a canvas rotate shortcut, similar to the way you can Alt+RightClick to quickly change brush size?
Is it possible to lock button positions? Sometimes I accidentally drag them around when I meant to click.
Is it possible to lock panel sizes? For example, if I have the Navigator and the Layers panels vertically in the same group, can I lock the height of the navigator so that I don't have to re-adjust it all the time? Many panels have a minimum height so I guess what I am asking for is if it's possible to set a maximum height as well.
Is it possible to disable Photoshop from automatically appending "copy" at the end of layer/folder names when I duplicate them?
These are things I'd really like to change to my liking as they are problems I run into on a daily basis.
I hope someone can provide some nice solutions
2. No. It's a sore spot that got some forum time when Photoshop CS4 was first released, then again with CS5. It's said that the rules change slightly when using full-screen mode, though I personally haven't tried it.
3. Not sure, since I haven't tried it. However, you may want to explore the Edit - Keyboard Shortcuts... menu, if you haven't already.
4. What buttons are you talking about? Those you are creating in your document? If so, choose the layer you want to lock in the LAYERS panel, then look at the little buttons just above the listing of the layers:
5. There are many, many options for positioning and sizing panels. Most start with making a panel visible, then dragging it somewhere by its little tab. One of the important features is that you can save your preferred layout as a named workspace. Choose the Window - Workspace - New Workspace... to create a new named workspace (or to update one you've already created). The name of that menu is a little confusing. Once you have created your workspace, if something gets out of place, choose Window - Workspace - Reset YourNamedWorkspace to bring it back to what was saved.
You'll find that panels like to "stick together", which helps with arranging them outside of the Photoshop main window.
As an example, I use two monitors, and this is my preferred layout:
6. No, it's not possible to affect the layer names Photoshop generates, as far as I know. I have gotten in the habit of immediately naming them per their usage, so that I don't confuse myself (something that's getting easier and easier to do...).
Hope this helps!
-Noel

No Video With Google Talk on Droid 3

Just got my wife the new Droid 3 that's running Android 2.3.4. This is the version of Android that is supposed to support video with Google Talk. Tried starting Talk and only thing I can do is messaging with Talk. No video option like on my Thrive tablet.
What's the Deal Google?Verizon/Motorola?

I know how software works and how companies have a habit of delivering products before they are ready, i.e. "get the device approved for software that is loaded on a device".
Based on what I found on the Motorola frequently asked questions page, see below, It appears that Motorola tried but right now it's in Google's & Verizon's court. Because of Google's urge to keep their products a step ahead of their competitors, I'd be surprised if it was them holding up approval.
Google Talk video chat
DROID 3 by Motorola will not support Google Talk videochat at the time of market launch. We are excited about the potential of videochat to enrich the Motorola smartphone experience, and we are working actively with Google and Verizon Wireless to enable this feature as soon as possible.
While we do not endorse or guarantee these solutions, or provide support for them, some owners have reported success using a 3rd party Android Application like "Tango". You can search the Android Market for 3rd party applications that are available that will enable you to video chat.
Here's the link to the info above: "https://motorola-enterprise.custhelp.com/app/answers/detail/a_id/69514/~/droid-3---google-talk"

Ichat not communicating with google talk

My iChat suddenly stopped working with google talk with a message stating that "iChat can't communicate with the Jabber Account [email protected]: could not communicate to host xmpp.l.google.com". I have tried to delete my google acct and add it back in but with little success. Other things I have tried are changing the server settings, clicking the SSL box on and off, restarting my mac, and turning my Wifi off and on. I tried to open up the Jabber Account on my roommate's computer and it worked fine. It is unusual as my Jabber Account was working fine yesterday and then it suddenly stopped working. Please help!
Thank you!

While we all have MacBooks in this forum not all of us use iChat. There's an iChat Support Community where everybody uses iChat. You should also post this question there to increase your chances of getting an answer.
https://discussions.apple.com/community/applications/ichat

How to enable usage of Jabber (& Google Talk) accounts w/Parental Controls

Hello all,
As someone who just spent a few hours trying to figure out how to get iChat in a Parental Controlled account to work with Jabber (and Google Talk) accounts, and seeing that there were no good solutions posted on these boards earlier, I just wanted to share a workaround which could potentially work for some people.
You can find the solution posted on my wiki: http://wiki.lensovet.net/EnableJabber_accounts_in_iChat_with_Parental_Controlledaccounts
Of course, the usual caveats apply: make sure you have a backup of all your data before you proceed, and I take no responsibility if things go awry. If you have any questions, please post them as replies to this thread.
Good luck! Hope you find this helpful.

Hi,
The reason I ask is that in Snow Leopard you can Add the Jabber/Google account's Buddies to the Allow List and they will work.
In Leopard this cannot be done (The Parental Controls vary in this extent).
In either case Bonjour also does not work.
Can you confirm you can Enable your Bonjour Buddy List (even if you have no other Macs) ?
Some people may find it useful to use to call kids, via Bonjour, for Tea or Dinner but still use other features of the Parental Controls.
7:34 PM Tuesday; November 30, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Some Openfire/XMPP/Google Talk questions regarding SRV records

Similar Messages

Maybe you are looking for