Sony dvd player with any creative 5.1 channel speaker

I have a sony dvd player(DVP-NS57P) with following outputs,
Composite Video Output -
Component Video Output -
Analog Audio 2ch Output (L,R) -
Coaxial Digital Output -
Optical Digital Output - and I want to connect this one wiht any creative 5.1 channel speaker to create a home theatre. I planned to by a sony home theatre, then my dvd player became waste. I want to utilise my existing dvd player, is there any possiblities there , also suggest which model in Creative is suitable? I really thankful to to you valuable suggesion. my budget is Rs6000.

interscope,
If you have a Li've! 5. card, the CMSS option is located in the PlayCenter application. You can check this thread for more info.
Jason

Similar Messages

Connecting a Sony DVD player to Sony STR-DH750 AV Receiver with RCA cables

I have connected a Sony DVD player with RCA cables to Sony STR-DH750 AV Receiver at the VIDEO inputs. I get audio, but no video. How do I connect the DVD player to the AV receiver to get both audio and video?

Hi JB4,
Are you using HDMI cable in addition to your RCA connection? This HDMI cable is from the receiver going to the TV using the HDMI OUT port. Another option, you are using the RCA yellow + red&white right? you may connect the yellow cable directly to your TV if it has yellow port for video.
Thanks.
>Joffrey
If my post answers your question, please mark it as "Accept as Solution"

Burning DVD in Lion Problems. Keep getting REGION ERRORS in SONY DVD PLAYER @ playback. Settings correct. Leopard burns fine with all media. Lion does not with TOAST. DVDSTYLER burns a readable disk.

I have tried several types of media in a brand new (less than 2 months old) 27" iMac running the latest version of Lion. It will not burn a standalone DVD player readable disk. I am in North America and buring in NTSC format. Settings are set properly. Buring at BEST speed - states its burning at 3x. I have tested SONY printable DVD's +R and Verbatim non printable -R disks in Lion with Roxio Toast 8 & 10. No luck. DVDSTYLER burns a readable disk, but not realy happy about the look and functionality.
I am getting REGION LIMITATION errors in the SONY and other stand alone DVD Players.
Disk plays in XBox 360 and laptop PC also.
I am set to region 1.
AS I stated, DVDSTYLER does burn a readable disk, the problem seems to be with TOAST and LION ?
My old 21" iMac running Leopard 10.5.8 has no problems with burning. Any media, Toast 8, disks perform just fine.
Any suggestions ?
My only solution is to do the editing of movies I need to do on the 27" and transfer them to the 21" for burning.
lame
Or use the sub par DVDSTYLER program.
acceptable but disappointing.
ideas ?

SONY DVD player is brand spankin new.
Have not tried Imation disks.
Its just puzzling that Leopard and Toast 8 produces a DVD where as Lion and Toast 8 produces a coaster.
I tried not printiable Verbatims. Same result.
Need printables for the projects that I do.
Appreciate the suggetsions.
Will be methodically dilligent and post any results here.
any help from any others would be appreciated.

DVD's not working on Sony dvd player

I just bought some TDK DVD-R 16x. I burned a DVD with my iMac G4 in iDVD. I tried to play it in my Sony DVD player and it said it was was not allowed because there were limitations or something. Can I fix this or do I need new DVDs??

Suggest you create a disc image and then burn the
DVD. File/Save as Disc Image...
http://docs.info.apple.com/article.html?artnum=164927
This will isolate any encoding/burning issues you may
encounter. Once the disc image is created,
double-click the .img and burn the virtual disc that
should appear on your desktop, using Toast to burn
the DVD. Disk Utility to burn the .img file. Usually,
you can select a burning speed in Disk Utility.
There are variations to this process based on which
OS X you are using...
Open Disk Utility (in Utilities folder in
Applications folder), click on the virtual disc
(maybe the .img) in the left-hand window. Click the
Burn icon. A new window should drop down and your
SuperDrive tray will open after clicking the Burn
icon. Insert a recordable DVD. (Verbatim DVD-R
preferred by me.) Click the Close button. Wait.
Select a burn speed. If you hold your mouse cursor
over the pop-up it says: "Select a slower speed to
work around burn failures," so select 4x or slower
for best results. Then click the Burn button.
-->If the virtual disk selection won't allow you to
click the Burn icon, use the .img file instead. This
may have changed in 10.3.9 and did change in Tiger.
Also, you can use DVD Player to play the virtual disk
to check your iDVD project before burning to DVD.
Launch DVD Player. File/Open VIDEO_TS (Open DVD
Media... in Player 4.6). Find the VIDEO_TS folder and
open that. (The audio folder is for DVD-Audio
disks.)
http://docs.info.apple.com/article.html?artnum=93006
I'm reading through the forums trying to figure why I am not able to play a DVD burned in iDVD that is "R", but the "RW" ones work fine.
Your post is very helpful and I've looked at the links suggested too. I just want to make sure I'm understanding. I've copied the movie to my hard drive using iMovie and then created an iDVD project. I then need to use either Disk Utility or Toast to make the DVD. I do not need to use the "burn" feature in iDVD. Is that correct?
I would appreciate any other suggestions. Maybe there is something else in the settings or preferences I need to adjust.
Thanks so much.
Margie
G5 Mac OS X (10.4.5)

Itrigue 5.1 5600 & Sony DVD Player Advice

Can anybody help.
I really love the look of the Creative Itrigue 5600 5.1 Speaker Kit and was hoping to install in my living room as a home cinema solution.
Will it connect to my Sony DVD Player through its single digital connection ?
Are the speakers any good in this type of setup ?
Can I extend the cable length if necessary ?
Do I need any additional bits ie decoder or does everything i need come in the box ?
Any help would be greatly appreciated.
Cheers
Karl.

Karl,
This DVD player only have digital output and stereo analog line out. There's a few option available for you. If you are bend on getting the I-Trigue 5600, you can either get the decoder that I have mention earlier to help decoder the signal from the DVD player to the speaker or you can connect the speaker to the stereo line out RCA jack from the DVD player Line out section. After which, use the CMSS upmix feature that's inbuilt in the speaker system to upmix the stereo sound to a virtual 5.1 surround effect. This of course isn't true 5.1 channel from the DVD sources.
Another option would be to get a digital speaker system like the Inspire GD580 that have the ability to decode DTS and Dolby without additional set of decoder box.
Jason

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggsts

I am trying to burn DVDs from iPhoto slideshows. My pictures number in the hundreds and we know that iPhoto captures 99 and then "starts over". This plays fine from the Mac Book but glitches arise on the DVD when playing it on a DVD player. Any suggestions on how to overcome the 99 "Chapter limitation" that IPhoto has? Has anyone heard or tried an app called Vilisoft? I read good things but I am not sure if it will do what I want.
Jim

Then use multipel 99 picture slideshows.
You can have up to 8 or 9 slideshows per menu. If you add a sub menu reduce that by 1 and add 8 more to the sub menu. The top menu can have links to up to 8 or so submenus (depends on the theme) and each submenu can have up to 8 or so slideshows.
However, converting a very large slideshow to a QT movie as Terence suggested does not envoke the 99 slide limit in iDVD. It just becomes a single video/movie file. So you should not have a problem with exporting at the large size, 720 x 540,
and dragging the resulting file into the iDVD menu being sure to avoid any drop zones.
OT

How do I record music from Itunes to a dvd to play on a Sony DVD player dvp sr500h?

How do I record music from Itunes to a dvd, that shows it is finishing but will not play on my hardrive or on a Sony DVD player, dvp sr500H?

If you are burning a DVD directly from iTunes (a feature which is present in older versions of iTunes but which was removed in iTunes 10.4), that creates a computer-type DVD for backup only and cannot play in any DVD player I know of. If you want to create a disk that can play in a DVD player, you'll need to burn an audio CD, an MP3 CD if the player will accept MP3 CDs, or use some other software.
Regards.

Looking for a DVD Player with same functionality as CyberPro Power DVD

I have just converted from PC to Mac, and love it, but have a special requirement and need some guidance.
I work in TV and need to be able to preview footage shot on site that has been converted onto a DVD. On my old PC using Power DVD, after hitting 'Play' I can fast forward and fast reverse, and increase the speed of FF or FR in small increments (up to 32 times normal speed) using the scroll wheel on my mouse. That gives me a lot of control as I search through countless hours of footage to shot list, and saves heaps of time.
With the standard Mac DVD Player, I can hold down the FF and FR buttons to get a slight increase in speed, but it is still far too slow and clumsy for what I need.
VLC was recommended, but when I hold down the FF and FR it scrolls in minutes, whereas I need to scroll in frames.
Does anybody know of a high quality DVD Player with the scrolling features similar to Power DVD that I can purchase?

Have you tried, +DVD Player>Controls>Scan Rate+ ?

I just purchased a Samsung DVD player with a USB port; says you can use a PC or player to play music; I tried to use my iPhone but it doesn't recognize it. Can you use an iPhone as a player, or would it have to be an iPod

I just purchased a Samsung DVD player with a USB port; Samsung says you can use a PC or player to play music using the USB port; I tried to use my iPhone but it doesn't recognize it. Can you use an iPhone as a player, or would it have to be an iPod? Or is there some ap?

Skip the DVD player use an HDMI connection to your system.
Use this http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a&fs =s%3Dalpha
or for just Audio use the 3.5 MM jack.

Can AE provide wired LAN connectto DVD player with internet streaming

Hi!
Can you please tell me if the Airport Express (in a home network that has a Airport Extreme as the primary router) be used to connect wirelessly to the router and then use the LAN 100 port to connect a DVD player with internet video streaming.
Bottom line, can the AE LAN port be used to feed a wired connection, or is it only for taking a LAN input to create a wireless network?
Thanks!

You could continue to use the older "g" devices to stream with AirTunes, but yes, the slower "g" speeds will drag down the performance on the network.
I would give a strong look to ethernet powerline adapters. They are almost as good as having a straight ethernet cable connection and will provide much more bandwidth and speed than wireless.
If you are going to download movies or stream audio and vide, wireless is not the way to go. Ethernet is always the best way to go if possible. Second choice is ethernet powerline adapters. Distant third for movie streaming or gaming applications would be wireless.

Can I use my Apple DVD player with USB connector with my new iPad?

Can I use my Apple DVD player with USB connector with my new iPad?

No, the iPad won't recognise it. If you are wanting to copy content to the iPad then you will need to copy it to your computer first, and you can then sync it to your iPad.

Connect sony dvd player to internet

I want to connect my sony blue ray dvd player to the internet but my router is in another room far away. I tried to connect the device directly to my verizon set top box and was unsuccessful. Do I have to buy another router and a splitter for each room that has a dvd player that I want to connect to the internet? Does anyone have a solution?

unfortunately the ethernet port is not operational, so unless the player is wireless, then you will have to hardwire it.
Two solutions.
1. the router can be moved to any room that has a working fios cable box. You will need a 5-1000mhz two way splitter, and then you take the cable out of the wall, put that splitter at the end of it, then one cable goes to the cable box, and the other to the router, and then it is now close enough for you to hardwire your player.
2. you can buy an inexpensive used actiontec off of ebay, and then use this configuration and it helps to extend your FiOS network to rooms that are too far for ethernet cables to reach.
Can I get an ethernet connection in a room with only coax?

Wow.. INSANITY.. Sony DVD player crashes!

Well.. I am a little discouraged here.. I got my project all perfect, and it plays great on my computer DVD player as well as in the simulator.
I play it on my Sony commerical DVD player, and if I stop the DVD during any one of the menus, upon playing/resuming it jumps to a video track which is not used!! and then immediately crashes.
This unused video track is actually split into two stories, and used for menu transitions. It makes no sense that resuming the disc should have anything to do with menu transitions-- Yet if it were, it's not even playing the stories-- It's playing the full track, and the DVD player stops immediately......
I tested this on my computer DVD player, and this behavior does not occur.
Has anyone else had anything like this happen? I have many sub menus which are not connected to these stories, and I tested playing those menus, and sure enough.. by stopping and playing it plays that one track and then dies!
It makes no sense, and I am a total loss as for what to do to................
If anyone has any suggestions, that would be greatly appreciated.
-patrick

If there is no resume information stored in Player's registers, then the player will resume into playing the first track in the physical order on the disc. This track will play in full, and if there is no end jump defined, the player will crash.
You can either change end jump for this "unused track" or change a disc layout in "by VTS" tab. One of the tricks of SPEC authoring is to put a short black video in VMG area that jumps to the menu, so there is always something for the player to resume to. Since DVD SP will not let you access VMG, you can simply make this short black video as your first play, that jumps into the main menu of your disc.

DVD Player with 10.4.3

I put in a commercially produced DVD of a film that has played many times without any problem and the system responds by asking me "What I would like to do with this blank CD-ROM"
Is there a system log somewhere that has got in a mess ?
G4 Powerbook / iMac Mac OS X (10.4.3)

l'hudson,
Perhaps the preference has been corrupted or needs to be reset.
Go to System Preferences...>CDs & DVDs>When you insert a video DVD: (Open DVD Player)
;~)

DVD menu title selection on DVD player with DVD's burn from iDVD

Regarding DVDs burned with iDVD 6.0.3, I have burned multiple DVDs with 6 buttons on the main menu page each of which links to a short film. On the menu screen when I push the right arrow button on the DVD remote not all the menu buttons light up. In addition to pushing the right arrow button on the remote, I have to push the up or down arrow button on the remote (to the DVD player hooked up to the TV) to get to some of the buttons in my DVD menu to be selectable. The buttons are arranged by me in a grid sort of pattern. Is there a way in iDVD I can get all the buttons to be selectable using only the right or left arrow keys on the DVD player remote? Do you understand what I am asking?
Message was edited by: powerbookaid

Hi powerbookaid
And welcome to apple discussions. It's actually difficult to find standalone versions on ebay and CL / Apple's FCP and DVDSP. I found them myself but it took me a very long time. Not always something you can do overnight. But if you are very patient something will show up eventually.
If you need something now that works (although I advise caution as in backup your dvd or video_TS first) then consider this app for much less money (donationware):
http://www.mydvdedit.com/index.php?lang=english
Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software / products that may be mentioned in this topic. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information above at your own discretion.
Message was edited by: SDMacuser

Sony dvd player with any creative 5.1 channel speaker

Similar Messages

Maybe you are looking for