Sort bin search for picking

Hello,
I have storage type X with multiple pallets for material A. I configured SLED picking strategy but I also need to sort the bin search by quantity.
For various reasons there are pallets smaller then the standard size in this storage type (there shouldn't be but... life is life), and I need to ship the standard pallets before the anomalous ones. Is there a standard exit where I can do this? (or a standard way to do this)
Thank you

Hi Joao,
In Standard we have picking Strategy Strategy A: Partial Quantities First,
you can have a look on that if that is not meeting the requirement then you can write the piece of code in user exit EXIT_SAPLL03A_005,
Please refer solution proposed in one of the existing SCN thread
Using 'Partial Quantities Management Strategy-A' without Storage Unit Management

Similar Messages

Bin search for putaway

Hello, experts!
Could someone give advice on following situation:
1) the storage type (high rack) has put away strategy P- storage unit type, mixed storage is set A- Several homogeneous storage units per bin, the mixed storage has value X - Addition to existing stock permitted.
2) material master has mark Addition to existing stock allowed.
When creating TO to move some returned quantities to stock, system is not searching for bin with existing stock. It adds the quantity to first available bin, where storage unit is allowed.
Is it possible to set system first add to existing stock without using strategy " I ", since mixed storage is not allowed for this strategy?
Thanx in advance!
WBR,
Brucke

Hi Brucke,
It is hard to diagnose without full information however you can try to find out which strategy it is executing by setting a
break point in the include LL03AF0B in the line PERFORM STRATEGIEN. Then try to trace LTAP-VLPLA: Source storage bin when you get into LL03AF1F you will see then the bin search strategy and why was that.
I hope to have helped you.
Best Regards,
Christian Rosa

If I'm reading a book on the iPhone and I want to pick up where I left off on my iPad, do I have to search for what page I was on on the iPad or is there a way to sync it?

If I'm reading a book on the iPhone and I want to pick up where I left off on my iPad, do I have to search for what page I was on on the iPad or is there a way to sync it? Or do I just have to search for a string of text from my iPhone on my iPad?

On both devices go to Settings>iBooks>Sync Bookmarks>On. Then when you want to quit reading on one device, tap the bookmark in the upper right corner and it will turn red. That marks your place. Close the book on the device now by tapping on the Library button in the upper left corner of the app. That will put the closed book back on the shelf. Tap the home button.
On the other device, when you tap on the book, it should open to that page. You have to be connected to WiFi in order for this to work. You can read this older discussion for more information. I was involved in that as well.
https://discussions.apple.com/thread/3754714?start=0&tstart=0

Can't we use Binary SEARCH for TYPE SORTED TABLE?(Performance Improvement)

Hi Expert!
                   I have declare a sorted type table with NON -UNIQUE, and want to use Binary search in read statement. But while using bunary search in read statement I'm facing an error. The ERROR is
"Table LI_MARC is a SORTED TABLE or INDEX TABLE. The BINARY SEARCH
addition is only allowed for these tables if the key specified is an
initial part of the table key."
Please find detail
TYES: tt_marc TYPE SORTED TABLE OF marc   WITH NON-UNIQUE KEY matnr,werks.
DATA: li_marc type tt_marc.
READ TABLE li_marc INTO marc WITH KEY matnr = i_mbew-matnr
                                                                      werks = i_mbew-bwkey BINARY SEARCH .
To my understanding , there is no need to mention Bianry Search for sorted table TYPE. Please let me know can i use ?

Hello,
there is no need to mention Bianry Search for sorted table TYPE.
Yes, this is because for SORTED TABLEs binary search algorithm is used by default for READ TABLE. Although you can use BINARY SEARCH addition but it's use is redundant.
As for your case you've defined the KEY fields incorrectly There shouldn't be any "comma(s)" between the fields.
TYPES: tt_marc TYPE SORTED TABLE OF marc WITH NON-UNIQUE KEY matnr werks.
When you define it with commas
TYPES: tt_marc TYPE SORTED TABLE OF marc WITH NON-UNIQUE KEY matnr, werks.
the result is something like this:
TYPES: tt_marc TYPE SORTED TABLE OF marc WITH NON-UNIQUE KEY matnr.
TYPES: werks.
Hence you were getting the syntax error!
BR,
Suhas
PS: As for MARC you can use UNIQUE KEY addition because MATNR & WERKS are the key fields in the table.

Anyone help? I click on buttons within websites and my mac opens new webpages advertising, mac keeper pro or some foreign exchange trading platform. Did i pick something hop in a download? how do i search for and get rid of this annoying infiltration?

Anyone help? I click on buttons within websites and my mac opens new webpages advertising, mac keeper pro or some foreign exchange trading platform. Did i pick something hop in a download? how do i search for and get rid of this annoying infiltration?

You've installed some form of adware. Take a look here: http://www.thesafemac.com/arg/

My ipad has been connecting to internet/email quite happily until the last few days, it just seems to be searching for my network, the ipod has picked this up. Help

My ipad has been connecting to internet/email quite happily until the last few days, it just seems to be searching for my network, the ipod has picked this up. Help
John

Thanks James
This has solved the problem. What I can't get my head roud is the ipod worked fine but the ipad didn't? any way thanks again.
John

When searching for an image in Finder on iMac, I found hundreds of images of printers !! All sorts of printer images which I certainly haven't loaded on.I went to Finder, File, Find and Image and there they are, hundreds,if not low thousands of them.

I was searching for an image on my Imac and when I went to Finder,File,Find and then Image, I found hundreds if not early thousand images of printers ! Amazing in one way but I didn't put them on my machine and don't really want them there.Did they come pre-loaded? Can I delete them safely? Thanks

Almost certainly, no absolutely not once you start deleting stuff like this that you think is not needed, eventually you'll trash something essential and cause yourself a lot of heartache.
There are numerous files classed as images, some will be temporary files in browser caches, others system files, others your "real" images, others files which are not really images but appear to be.
The amount of space of what I presume are essentially icons of printers will will be minimal, lets say these images are 5k in size (I guess they are much smaller?) and there are 1,000 of them, thats only 5Mb. No doubt your disk has multiple gigabytes free, eg thousands of times as much free as you'd save by deleting all of them. So you might gain back an extra 0.0001% disk space*. NOt worth the time, let alone the risk, plus then you'll get into a mindset "hmm, I dont think I can possibly need this 23byte file either I'll delete that as well etc, and then "problem......".
Where are the images stored? It may be that at some time you were searching for a new printer and these images are from that exercise (though I doubt you looked at thousands?) in which case they are in your browser cache and you can always delete that through the browser, but that space will be overwritten by other images anyway.
"If it ain't broke, don't fix it" is a motto to work by with computers.
*( or, if you really do need the (say) 5MB of disk space back because you are running out, this would only be a very temporary solution and that wont have done you any good)

I have just got the iphone 4s and have been using the siri option, the problem is mine wont find me business etc in the UK it says that it can only search for business in the US. do i have to change any settings for this to pick up UK based items?

I have just recieved the Iphone 4s and have updated it etc, i have just started to use the SIRI app which is great but when i want to search for say business etc it says it can only search for these based in the US. Im in the UK and have found this a little frustrating not being able to search for things locally.
Is there a setting i have to change or update.
Can anyone help??

Apple haven't yet signed agreements with yell.com and similar local information services here in the UK or in europe. The rumor is that in the UK and others, will get it sometime towards the beginning of the year.

In Pages document, how do I search for word and view its frequency and page numbers in a sidebar?

I have a long document and I want to be able to search for certain key words and phrases, and then see how many times they appear in the document and exactly where. How do I conduct this sort of search and viewing? In the past, in Pages and Word, I've been able to view my "finds" in a sidebar but I can't figure out how to activate that service anymore.
Thanks!

Here is a word frequency concordance Automator Service that works in both versions of Pages. It does not present a page number reference. It is by descending count, and alphabetically, within the repetitive counts as shown in the image here. In any document, you select the text to process, then Menu > Application Name > Services > Frequency. The Service will open TextEdit with the n-pages of scrollable results. It is 16 pt Helvetica Neue for legibility.
Here is the code:
on run {input, parameters}
     try
          set mySelection to input as text
          set formatted_result to concordance(mySelection)
          if formatted_result is not null then
               set textHeading to "Word Frequency List"
               tell application "TextEdit"
               activate
                     set NewDoc to make new document with properties {name:"Concordance"}
                     make new paragraph at beginning of text of NewDoc with data textHeading & return
                     make new paragraph at end of text of NewDoc with data formatted_result
                     tell text of NewDoc
                           set font to "Helvetica Neue"
                           set size to 16
                           set color of paragraph 1 to {0, 0, 65535}
                     end tell
                    end tell
          else
                    display dialog with title ¬
                     "No input selected" with icon stop ¬
                      giving up after 15
          end if
     on error errmsg number errnum
                display alert ¬
                           "AppleScript Error" message errmsg & "[" & errnum & "]" as critical ¬
                              giving up after 30
     end try
     return input
end run
on concordance(mySelection)
-- Use Ruby to count word frequency and alphabetically sort words
    set rb to ¬
    "selected = String.new\nfreqs = Hash.new(0)\nselected = ARGV.join(' ').gsub(/[,.]/, \"\")\n
     words = selected.split(/[^\\w-]+/)\nwords.each { |word| freqs[word] += 1 }\n
     freqs_sorted = freqs.sort do |a,b|\n\t
     a.last == b.last ? a.first <=> b.first : b.last <=> a.last\nend\n
     freqs_sorted.each { |k,v| printf \"[ %8s ]          %s\", v, k }"
    do shell script "/usr/bin/ruby -e " & rb's quoted form & space & mySelection's quoted form
end concordance
Launch /Applications/Automator and choose New Document, then click the Service icon, and then select the Choose button.
On the left, you will have a list of Libraries from which to choose workflow items. Find Library > Utilities. In the adjacent column, locate the Run Applescript workflow. Click on it, then drag and drop it in the large workflow window to your right.
At the top, you can select Service receives text in any application. Leave Output replaces selected text unchecked.
In your Run AppleScript workflow window, you will see AppleScript boilerplate. Click on it and press command+A, then backspace to delete this content. Copy and paste the above code into this Run AppleScript workflow window. Press the Run button in Automator's upper right corner. If (and it should) a TextEdit window pops up, you are good, and you want to press File > Save. A dialog box will pop-up where you can name your Service. I called my Frequency, you may wish to call it something else. Once you have save it, you can exit Automator. Services are deposited in yourlogin directory/Library/Services.
If you have a Pages document open with text, either select it, or command+a to select the entire document. Now, you select your Service via Pages > Services > Frequency. This will now pop-up a new TextEdit document with the results. If you want to save this new document, you must use option+File to Save as...

Searching for a single keyword in lightroom 5

Hi there,
I am a newbie to lightroom 5 and I am slowly learning the power of keywords.
My question is,
I have 1000's of images of my daughter in my catalog I have key worded all of them. There are some images with her on her own or with me, the mum, nan, granddad etc etc. I have also key worded the photos with, for example me. So on an image the key word is annie, nick. When I go to the 'text' search in the library list I type in annie and every single image of her comes up be it with me the nan, the mum etc. My daughter has hundreds of image with different family members. How do I just get the search to pick "annie" as the keyword and not the rest of the keywords in the catalog.
For example,
I know I can do a search like this, annie, !nick, !mum, !granddad etc etc, but this is so time consuming. Is there a character that can tell lightroom that you only want the image of annie with no one else or nothing else.
I am aware you can select all of the singular images of my daughter and create a collection with just her but this is also time consuming.
Another way this would be annoying is if you had images of trees for example, some trees might be taken by a water fall, mountain, road, picnic table or just one on its own. you might have hundreds of tree image on there own and hundreds of images of trees with a feature. If you try and search for just a tree or trees with nothing else in the image your search result is going to bring up every single image with a tree in it. Not just the images of a tree.
Hope this makes some sort of sense. I have searched all over the internet and there doesn't seem to be an option for this. Or maybe I am missing something. If I'm not missing something and this just isn't possible maybe lightroom designers could look at implementing this search criteria in future updates.
Regards,
Nick.

I have tried that and i think i am more confused. Its going to take me a while to learn this stuff. I have done the ! option and have narrowed it down to the images I want and have created a collection with just the images I wanted. I think I am going to have to think ahead with the keywording in the future. I will get there, its all trial and error at the moment.
Its only a problem at the moment as I have an external hard drive so I have just added 'ADD" all images (over 4000) to lightroom from there as I want to save all future photos I do on the external hard drive. I am reluctant to fill my new IMAC with loads of images and take up loads of space. With photos I do in the future I will be saving on the imac probably and backing up on my external hard drive. The 4000 images are from the last year or so before I got this MAC.
When I do future photo shoots etc it will be easier to move the images to the correct folders as I will be working on a lot less images. So I believe in the future it will be more managable. Trying to key word 1000's of images at the same time has confused me a bit.
Cheers for you inputs peeps, appreciate it.

Searching for a good file manager

I'm searching for a good file manager. Konqueror 3.5 is quite good, dolphin 4.1 and konqueror 4.1 are not. Since konqueror 3.5 is going to die due to lack of support in the future, I kind of need to find a new good file manager...
Do there exist file managers with the following features?
Many of these features are things I thought were quite logical to be in a file manager, but seem to be missing in most "modern" ones...
-independent of any desktop (gnome or KDE), just a standalone program
-preferably not being both a web browser and file manager in once, at least not in an annoying way. Konqueror 3.5 shows that being that combination is possible without being annoying.
-ability to have a tree view of the folders on one side and list view showing the files and subfolders of the folder currently selected in the tree on the other side
-detailed list view showing at least filename, type, date and size, and the ability to sort according to any of these properties
-a non-detailed view showing image contents would also be nice, to browse folders of photos or other images
-ability to open files in certain programs if you doubleclick the file, NOT open it by singleclicking, singleclicking may only select it
-ability to select multiple files by dragging box around files or using keys like "ctrl" and "shift"
-ability to do "open terminal here" or type terminal commands in the current open directory
-must have ability to drag files from one folder to another, from list view to tree view and vica versa, to move or copy them
-and must have ability to use "ctrl+c" and "ctrl+v" to copy files and foldes from here to there
-multiple tabs is a huge plus
-favorites (to local folder paths) is also a huge plus
-preview of files when hovering the mouse over them is nice
-must have ability to zip and unzip (or other compression formats) folders by just right clicking them and choosing a zip/unzip command there
-in addition to that, must also have ability to browse through a zip file as you would through a normal directory, and drag files from the insides of the zip file to the tree view to automatically unzip those files there, and of course "ctrl+c"/"ctrl+v" should also work to copy a file from the inside of the zip file, to some other folder on your disk
-no horizontal autoscrolling in the tree view, that is an invention straight from the abyss...

I know exactly how you feel about KDE 4 vs. 3 -- Konqueror was the best part of KDE for me (pretty much the only part I ever used, actually; my window manager is a slightly modified version of WMII and I generally loathe "desktop environments"). KDE 4 ruined it, completely and utterly.
I submitted about 20 different bug reports about Konqeuror 4, mostly features that they'd deleted or mangled; some of them are starting to be addressed now. I don't think they'll ever fix the speed issues though, because those are dependent on the underlying KDE 4 libraries as far as I can tell -- it's as if KDE 4 were purposely and deliberately designed to be slower than KDE 3. Even if they fix all of its deficiencies, that'll probably keep me from using it...
Right now there's KDEmod, which will hopefully maintain its KDE 3 branch for a while longer. It's starting to show some problems, though; I haven't been able to get kdemod konqueror 3 to work fully out of the box (the settings pages are all blank). On my main machine, I somehow managed to hack together some of the KDEmod3 packages so that I have a functional konqueror 3 running alongside the Arch repository's version of KDE4. I'm afraid to pacman -Syu now, though, because it will probably break horribly :P
I don't remember exactly how I got konqueror 3 going like that, as I did it in my initial fit of rage after I did the pacman -Syu that got me KDE4 (a decision I have regretted ever since), but it was something like this:
1. move /opt to /opt.kde4
2. make a new /opt
3. download several KDE 3 packages from the KDEmod3 repositories manually
4. extract those packages into the new /opt with tar -xzf (NOT pacman!)
5. try /opt/kde/bin/konqueror
6. read reams of error messages about missing libraries, segfaults, etc.
7. try to supply the missing libraries by downloading other kdemod3 packages and manually extracting them
8. goto 5
Then, when everything worked (sort of), I renamed some stuff so that 'konqueror' is konqueror 4 (I think having it konqueror 3 broke something else, but I don't remember what), and konqueror 3 is called 'k3nqueror'.
If KDEmod3 ever goes away and there's no other good replacement file manager by then, I'll probably take the source code of KDE3 and try to make a standalone version of konqueror out of it. (Which will probably be quite a project because of how interdependent all the KDE components are.)
Some features I "need" in a file manager, besides the ones you mentioned:
- Konqueror's tree view (where you can expand folder branches in the file list)
- Infinite view splitting -- I frequently have my konqueror windows split into 4, sometimes as many as 6 or 7 view panes. Very useful for sorting out files.
- Selection rectangles are sensitive only over files -- I find full-row-select really annoying, because there are no guaranteed "blank" areas that you can click on to clear a selection. I also use this behaviour to grab long-named files that are interspersed with short ones, because they hilight first when the rectangle touches them (you wouldn't think this very useful, but surprisingly often you do want to do something to all the long-named files...)
- Right-clicking on a folder and clicking "Paste" pastes into that folder, not the current one -- you'd be amazed at how many file managers get this wrong. I shouldn't have to cd into a folder just to paste some files there.

Searching for Image size

Hi,
I want to start a gallery of printed pictures at my home, and to find some decent pictures in my 6500 iPhoto holds, I wanted to make an "intelligent album", that only shows images greater than a minimum resolution... iPhoto of course has this information, but it seems that I cannot search for it...
Or am I missing something???

Dirk:
The feature you want to look for is the pixel dimension, the larger the better. Currently there is no way to sort in iPhoto by that feature or file size. With the Info window open at the bottom left of iPhoto's window, you can click on a photo's thumbnail and see the dimensions and file size.
There may be a way to do it from the Finder but you would have to be very, very careful to not rename, move any of the files you find in that manner. Or else you'll seriously damage the library.
Here's how you can find the largest image file in the library.
1 - open the library package and type Command-F to bring up the search window.
2 - click on the iPhoto Library title at the top and then set a search with the following criteria:
a - Kind is image
b - Size (under other) is greater than X MB - you pick the size.
This will display all those files that are larger than the size you selected. You can COPY those file to a folder on the desktop or just note their file name to find in iPhoto.
This is not a convenient way to do what you want but the only way to sort out the largest files. Again DO NOT RENAME or MOVE any files when viewing this way.
Depending on the size of the prints you want to make I'd first go thru iPhoto and select those pictures you'd like to use. Then check their pixel dimension.
A 1600 x 1200 image will be able to print a 5.3 inch x 4 inch print at 300 dpi. My current camera creates 2816 x 2112 image files which can print, at 300 dpi, a 9 x 7 inch print. I've gotten good prints at a lesser resolution, i.e. 200 dpi. It all depends on the size and what you expect. Good luck.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Error message popped up when vl06o for picking

Hi there:
When I am executing vl06o to create transfer order for outbound delivery,then I select for picking button and outbound delivery number shows up,so I selected it and click TO in background button,then green check,then I went into create transfer order for delivery,but sytem says "system canno find source storage bin",but I had checked via ls24 that there had inventory for this storage bin of warehouse,help.

Hello,
In warehouse ,management, during transfer order creation, if you to default storage type, you have define storagge type search in customization.
Following is the path for it
SPRO>>Logistics Execution>>Warehouse Management>>Strategies>>Activate Storage Type Search.
In this you have first define storage type indicators to be used. and then search sequence required.
Once you have setup this you can have automatic storage type determined during transfer order creation.
Br,
Tushar

Customised metadata - search for multiple fields?

Background: I'm logging a STACK of footage and attempting to arrange it all by a series of different keyword categories (the day the footage was shot, location, camera type, content type, key players, etc). Each category has multiple variables (ie: in the camera category the options are Sony FS700, Canon 5D, Canon 600D, GoPro). I'm adding custom fields via the PPr Project Metadata>Add Property function using a simple Boolean tickbox.
Question: Is there a way to sort and search the custom fields? For example if I wanted to pull up all the footage shot on day 5, with the Sony, that comprises of interview content with a particular person is there a way to search for all these fields? I've been able to search for one keyword if I tag the material but so far searching and organising by multiple fields has eluded me.
The long way round is to create multiple bins and/or sequences for each variable in each category by hand, but that's a little tedious and has the potential to bloat the project. Any ideas to solve the problem? I've come from FCP a few months ago so the metadata side of PPro is still something I'm getting my head around. Thanks for reading!
EDIT: I'm running PPro CC for reference and can install and use Prelude if it helped.

For the time being I'm using a workaround employing titles above the footage to signify the relevant categories, and tagging significant moments in clips with markers, but it is perplexing.. Premiere seems to employ metadata in a phenomenal way - such that I haven't come across in any other mainstream editor - I just wish it had the functionality to sort and manage all that metadata it is producing beyond the search bar in the Project window.
Premiere gurus and Adobe affiniados: am I missing something obvious?

Question about how itunes searches for my music

hi,
i have a large library of music that i used to store on an internal hard drive (f:), but recently i got an external hard drive and moved all my music to it (g:).
i copied all my music to the g drive, and in the advanced pull down menu in itunes i changed the location to search for music to g: my music... at that point i thought i was done.
but as it turned out, whereas i thought i had MOVED all my files to the g drive, i had actually copied them, and the ones that were originally on the f drive are still there.
since then i have added lots of music to the library, and it all lives on the g drive. but i am starting to run out of space on my f drive, so when i discovered there were duplicate files there, i wanted to delete them all. here's wherein my problem lies.
if i go to a song that was in the library before i switched over to the g drive, in the get info window for that song in itunes, it still lists the song as living in the f drive as opposed to the g drive.
i need to delete all the music off the f drive, but my concern is that itunes will say i've just lost all that music. is there a way to basically empty out/depopulate itunes of all the music, and then go to file> add folder to library and just choose the g: my music folder? i know it will take a while, but that's fine. i just don't want to lose access to 27 out of 38 gigs of music by deleting the music off my f drive, and i really don't want to have to go through folder by folder and make the transition, as there are several groups who have music listed in both the f anf the g folders... it would be a nightmare to have to go through group by group, album by album.
any help would be greatly appreciated. thanks!
pc running windows xp Windows XP
pc running windows xp Windows XP

Welcome to Apple Discussions!
If you delete everything from your iTunes library
(Moving it to the Recylcle Bin), you can then go to
File>Add Folder to Library and select the Music
folder from your external drive.
Or, from the file browser you can locate the Music
folder on the external drive and drag+drop it into
the iTunes window.
Hope this helps!
hi,
okay... this worked sort of, but now i've lost all my playlists. they are still on my actual ipod, but now i need to know... if i go to sync the ipod with itunes, will itunes recognize my playlists and move them into itunes? or do i now need to go through and manually re-setup all my playlists BEFORE syncing again, because the playlists will get wiped out when i go to sync?
please let me know if you have any info about this... i really don't want to lose all my playlists.
thanks,
lori
pc running windows xp Windows XP
pc running windows xp Windows XP
pc running windows xp Windows XP

Sort bin search for picking

Similar Messages

Maybe you are looking for