Sort Sequence for Multiple TO

Hi,
I need to configure the sort sequence for mutliple TOs with different materials (Fixed bin picking). I hope bin coordinate needs to be configured for this. How to assign site to the warehouse number? or please explain the configuration steps for sort sequence?
Appreciate your help on this.
Thanks,
Raja

Hi Raja,
In SPRO Logistics Execution --> Warehouse Mgt --> Activities --> Define Print Control
Define the Sorting Fields under button Sort Profile/coll proc for the corresponding Warehousee number.
This is the thing responsible for sorting transfer orders.
Along with this you will also have to Define
1. Spool Code
2. Print Code
3. Printer Lables
Than make assignments to Warehouse Number Strg Type & rest all as per your requirement
Njoy....!!!
Hiren Panchal

Similar Messages

Sort Sequence for mutli dimension table in SAP Lumira

Hi Experts,
I notice one interesting point in SAP Lumira for multi dimension
For example, we have a table like below
Country City   GSV
A1           B        100
               C        150
               D        130
A2           E        200
A3           F        100
               G        150
if you turn on the subtotal for GSV in Lumira table, result will be like below
Country City   GSV
A1           B        100
               C        150
               D        130
               Total   380
A2           E        200
               Total   200
A3           F        100
               G        150
               Total   250
Sort by GSV descending, result will like this
Country City   GSV
A1           C        150
               D        130
               B        100
               Total   380
A2           E        200
               Total   200
A3           G        150
               F        100
               Total   250
Here the sort sequence for City under each country is correct
But the sequence for country is incorrect and I think the correct sequence for country will be
Country City   GSV
A1           C        150
               D        130
               B        100
               Total   380
A3           G        150
                F        100
               Total   250
A3           E        200
               Total   200
It looks like this issue is not only for Lumira and other company tools behaviors same as well
Would you kindly let me know whether whether for sorting, the sort sequence should consider from 1st level to lowest level
Best regards
Alex yang

Hi,
I think you've got a typo in the last block.
with regards to next steps - if you feel you have identified a defect, please log a support ticket via the normal routes.
if this is considered an enhancement, please submit a request at the Ideas Place for Lumira.
Many thanks,
H

Can't change sort settings for multiple items in iTunes 7.1

iTunes 7.1 introduces a great feature—the ability to set a separate Sort Name, Sort Artist, Sort Album, etc. This means that "Weird Al" Yankovic songs can finally appear down among the Y's instead of up at the top of every list, by changing the Sort Artist to Yankovic, Weird Al.
Unfortunately, this feature is fatally crippled in 7.1. As far as I can tell, you can only change the Sorting information on individual tracks. When you change the information for multiple tracks, the Sorting tab doesn't show up. This renders the feature all but useless.
Let's say (hypothetically) that your friend is an enormous nerd (in theory) and your friend has 139 "Weird Al" Yankovic tracks (for the purposes of this example only, of course). Instead of just selecting all these tracks at once and changing the Sort Artist to Yankovic, "Weird Al", I (I mean, he) has to retype this information for each individual track. That's crazy! Surely this must be a bug.
Core 2 Duo 20" iMac Mac OS X (10.4.8)

I just found the solution to this myself.
In a very un-Apple way, this is an undocumented feature only accessible by right- (or control-) clicking.
1. Change one track to your desired sort settings (for instance, set the Sort Artist to Yankovic, Weird Al.
2. Right-click on that track. In the contextual menu that appears, there is a new submenu called "Apply Sort Field." If you choose "Same Artist," it will apply your new sorting information to all your other tracks by "Weird Al" Yankovic (or, if you are not a huge nerd, any other artist you substitute).

Sort Sequence for Product Catalogue ISA B2B

Hi there
I'm trying to find another way of sorting items within a catalogue area. As it is in the standard system , the products are simply sorted according to the Product number (acceding).
The requirement is to be able to rearrange the sequence according to alternate means such as product description. So that when it comes to browsing the product catalogue in the web shop the specific sort sequence is reflected.
we are using CRM4.0 E-Selling B2B
thanks in advance

Thanks for the responce,
No, we use Both Manual and Automatic too.
In this program can you re-import or is that only used for first time uploads ?
secondly does the sequence of products, within a catalogue area remain as it is in your spread sheet after the upload, or does it revert back to the accending oprder of the product numbers ?
thanks

One sequence for multiple lookup tables?

I am sorry if this is off-topic, however can anybody advise what is better - use one sequence for all tables (lookup tables) or to create unique sequence for each table?
Thanks
DanielD

Daniel,
After you read this (http://asktom.oracle.com/pls/ask/f?p=4950:8:::NO::F4950_P8_DISPLAYID,F4950_P8_CRITERIA:2985886242221,), you may be sorry you asked.
Scott

How to specify multiple sequence for multiple fields in a primary key!

Hi,
i have a table which has about 15 fields, one of the field is primary key and i am able to specify the sequence for it using toplink and when the object is created through toplink the sequence get generated automatically, which is fine.
Now i have to add another sequence generated field to the table this field is not nullable and
i am looking for a way in toplink to specify the sequence for this field too, so that when we create objects through toplink the value for the field is automatically generated instead of us fetching the next value from sequence using a sql statement and then using the set method for the field.
is there a way i can specify a sequence for another field through toplink, while keeping the sequence settings for the primary field untouched.
thanks for your help!
-

TopLink only supports a single sequence field in its' mappings. There should be an API you can use to get another sequence number from an event, but I could not find an easy one (please log a bug for this on EclipseLink). The following code might work if you define the other sequence in TopLink, but you could also just execute the raw SQL as you are doing.
i.e. something like,
preInsert(DescriptorEvent event) {
MyObject object = (MyObject) event.getObject();
object.setOtherId(event.getSession().getDatasourcePlatform().getSequence("MY_OTHER_SEQ").getGeneratedValue(event.getSession().getAccessor(), event.getSession()));
-- James : http://www.eclipselink.org

Looking for a way to change sort order for albums

I know how to set the sort order for each individual song (Sort tab on song info), but is there a way to set sort order for multiple tracks?

Please help!

How to read sort sequence and other properties of a specification in Cg02 .

hello ,
i need to update the specification properties in CG02 basing on sort sequence for hazards and mariane pollutant of a specification.
do we have any standard Bapi or Fm to read the properties of Specification .
thanks for your help
Ananta

well -
specifications are rather complicated - there are many tables linked by internal keys. As most of them (and all in the folowing overview) begin with 'EST' I only use the subseqent letters - so table ESTRH is written as RH below.
Here an - uncomplete - overview
Header: RH
2nd level:
- RR References
- RI Identifiers
- MJ Material Joins
- VH Valuation Headers (containing field ESTCAT for valuation type)
3rd level:
- VA - Valuation (instance - containing sequence number (field ORD - non unique!)
4th level - data of the valuation:
- PR Data stored in class system (such as regulation, DG-Class)
- DU Usage
- VP Components
- 0F Transport Classification (containing Hazard Inducers)
In general you can determine the related table if you look at the technical info at CG02. The structure name will be like
"RCGxxIOT" where xx stands for the last two letters of the table ESTxx. The structure of interfaces in FUGR C1F5 are defined with a similar pattern: ESPRH_APIxx_TAB_TYPE.
To read the data, you may use FM C1F5_SPECIFICATIONS_READ which has sufficient documentation. You may refer to the documentation of obsolete FM C1F2_SUBSTANCES_READ as well.
A good alternative is BAPI_BUS1077_GETDETAIL - as this is a BAPI Function it should work after an upgrade while FM of C1F5 migh make some adaption necessary.
However - it will take some days to understand both - the data model of specifications and the related FMs. I personally would recommend a developer familar with this 1yr+ before asking for implementations that are not only reading data - but they are hard to find....
have fun!
hp

AFS Sort - Sequence (table J_3ASORT)

We are in the process of upgrading from SAP 4.5B (AFS 2.5B) to ECC 5 (AFS 5). Table J_3ASORT has been marked as 'obsolete' by SAP and no new/substitute table is mentioned (in the SAP documentation nor notes - that I could find) that will contain data that I can use in its place.
J_3ASORT is used in many of our customer applications to control the sequence of our sizes / dimensions as they are presented on the screen or report.
If I let the screen display in the sequence based on the dimension then we will get (for example):
Dimension value Sort sequence
1X              00001350
28              00000100
2X              00001400
30              00000200
32              00000300
34              00000400
36              00000500
38              00000600
3X              00001500
40              00000700
42              00000800
44              00000900
46              00001000
48              00001100
4X              00001600
50              00001200
52              00001300
The dimensions are not in the correct 'size' sequence, but rather they are in the ASCII sort sequence.
When I use the sort sequence, I get the better readable version of:
Dimension value Sort sequence
28              00000100
30              00000200
32              00000300
34              00000400
36              00000500
38              00000600
40              00000700
42              00000800
44              00000900
46              00001000
48              00001100
50              00001200
52              00001300
1X              00001350
2X              00001400
3X              00001500
4X              00001600
Short of creating a new Z table does somebody know of a table that can be used to the same effect of being able to assign a sort sequence to the various dimensions?
I very much appreciate your time and effort.
Henry

Henry,
         Did you try out this note - Note 856352 - AFS 5.0 upgrade: Wrong values order for grid characteristics. Now in AFS 5.0 the characteristics maintenance is thro ct04. The dimension sort sequence for the relevant grids are now maintained in the following table - J_3APGDI . I guess you will have to populate this table using your dimension and grid relationships.
I hope this piece of information was useful to you.
Regards,
Gary

Sort functionality using MULTIPLE columns in a table control

Hi all,
I have a custom screen with table control.Now i need to provide SORT functinality in this screen for the columns in the table control.
My questins:
1.Is it possible to seelct MULTIPLE columns in a table control for SORTING?If yes,what explicit settings do i need to do while creatng the TABEL CONTROL in the screen?DO I need to select "Column selection " as MULTIPLE??
2.How do I write the code for SORT functinonality for multiple columns?
I know how to write the code for SORTING on basis of single column .
Thanks!

Hi Rob,
Thanks for the reply.
However I was thinking to apply the same logic as for single columns as follows:
types : begin of ty_fields,
            c_fieldname(20),
           end of ty_fields.
data : t_fields type table of ty_fields,
           wa_fields like line of t_fields.
WHEN 'SORTUP'.(Ascending)
      loop at TABLE tc01-cols INTO wa_tc01 where selected = 'X'.
      SPLIT wa_tc01-screen-name AT '-' INTO g_help g_fieldname.
      wa_fields-c_fieldname = g_fieldname.
      append wa_fields to t_fields.
      endloop.
      describe table t_fields lines l_index.
      c_count = 1.
      if c_count <= l_index.
      read table t_fields into wa_fields index c_count.
      case c_count.
      when '1'.
      l_field1 = wa_fields-c_fieldname.
      when '2'.
     l_field2 = wa_fields-c_fieldname.
    and so on depending on the no of columns in the table control...
      endcase.
      endif.
      SORT t_tvbdpl_scr BY l_fields1 l_fields 2......l_fieldn.
Let me know if the above method will work!Also for the above method to work will the type of fields(columns on whihc sort function will be applied) matter???
Thanks again for your time.

Is there a way to set up browse sequences for project with multiple TOCs and conditionalized modules

I'm using RoboHelp 9 with WebHelp output.
I've got five outputs, one of which contains Help for common functions, while the other four contain Help for licensed modules. When a user opens the Help for a licensed module, the user sees the core Help and the licensed Help. In addition, files are conditionalized so that searching for unlicensed content from a licensed Help module brings up nothing.
I've been troubleshooting problems with the Previous Topic and Next Topic which, thanks to William, I learned are related to browse sequences. After trying assorted configurations, I've got a couple of questions:
Does RH support only a single browse sequence in a project, even when the project has multiple outputs & TOCs?
If RH supports only a single browse sequence, does that mean there is no way to create a unique browse sequence for each separate output?
If RH supports multiple browse sequences, what is the workflow?
I also maintain a 'master' TOC that contains all the modules, both common and unlicensed. What I've done for now is to autocreate a browse sequence based on the 'master TOC'. When I generate output for a licensed module, which is conditionalized, I only see the TOC for that module and, therefore, can only browse between books and subbooks in that module. I've also verified that topics that do not appear in the conditionalized module, such as for another licensed module, do not appear in the Search results list either.
Carol

Me again, Carol
You also asked about the functional differences between WebHelp and WebHelp Pro, so let me elaborate.
I'm aware of only two major differences (other than the extra benefits of feedback analytics reports and management of "Areas" with authentication in RoboHelp Server).
The behavior of Browse Sequences as explained above
The fact that Content Categories are not supported in WebHelp Pro for this latest version 9.
As for the Browse Sequences you are trying to provide for different modules (licensed, etc.): Multiple Browse Sequences are included in a single .BRS file. The sequences are defined in the XML within the single file.
As a workaround (for either WebHelp or WebHelp Pro) you could create a NGP Help.brs. which you have already created for one module; then backup and archive it. Then, create a modification for the different module before you generate again. The NGP Help.brs. will need to have the same name as your project so you will have to manage the desired .brs file into the project folder when you generate that version. All of your other choices (TOC, Index, Conditional Tags, etc.) would remain the same for the respective modules.
Finally, I note that you are apparently generating WebHelp Pro right now even though you are not publishing it to the RH Server? This is really not the best practice. You should generate plain WebHelp for a web server that does not have RH Server on it (even though you may be getting away with it). As for your concern about "breaking" something; each output is placed in a different !SSL! folder automatically when you generate, so you should be able to generate WebHelp without interferring with the WebHelp Pro output. Then, you can re-publish to the RH Server using WebHelp Pro whenever the server is ready.
John Daigle
Adobe Certified RoboHelp and Captivate Instructor
Evergreen, Colorado
www.showmethedemo.com

Export Limits for Multiple Sequences in the Same Sequence File for TS3.0

Hi,
I am using TestStand 3.0 to a test application. Because we want to have our limits in a csv-file I have tried to use the Import/Export tools in TS. But this application only supports to export limits for the selected sequence (e.g. main, or subseq1) at a time. This makes it a pretty hard job to export limits from 30 test sequences. What I need is a possibility to export my limits from �all sequences� in my seq-file.
I have found an article on NI Dev. Zone about �Export Limits for Multiple Sequences in the Same Sequence File (TestStand 1.0.x)�.
http://sine.ni.com/apps/we/niepd_web_display.DISPLAY_EPD4?p_guid=B45EACE3D9CB56A4E034080020E74861&p_node=DZ52236&p_submitted=N&p_rank=&p_answer=&p_sourc
e=External
I have tried to use this code but because it�s for TS 1.0.2 the limits from my multi num test step and my custom steptypes isn�t exported. So that doesn�t fulfill my needs.
Is there an updated version with �all sequences� added to TS 3.0? Is there other good solutions to my problem out there?
Best Regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Hi David Mc,
Thanks for your reply. I have already considered this solution because the source code is added in the folder described in your reply. But that is not a good solution. It will cost me a lot of time to establish the toolchain, reverse engineer the source code, make the implementations and build a new dll (most off these is already knowledge by NI). And when NI make future releases of TestStand I have some merge work to do every time NI have made some changes in the files I have changed.
But as I write above: I have hoped that NI already has/or could made a solution like the one to 1.0.2 (see link in root) to me. And then they could include it in the next version.
I don't think I am the only one in the TestStand world that ne
ed this feature.
Best regards,
Morten Pedersen
CIM Industrial Systems A/S
Denmark

Sorting a Collection with dynamic columns using a custom compare function for multiple columns

I need help and ideas on how to sort a ListCollectionView. My problem is complicated by 3 requirements-
     1. The column values contain HTML tags that needs to be removed before sorting (use custom compareFunction to strip HTML)
     2. The columns are dynamic, so dataField names are not known at compile time (need a single compareFunction for all columns)
     3. The data is used in an AdvancedDataGrid so multi-column sorting is required
I have figured out how to solve any 2 of the 3 requirements. However, I am having difficulties supporting all 3 requirements.
Any help or ideas would be greatly appreciated. Thanks.

After playing with this some more I think I've figured out a solution. This seems to work in initial testing. Also, there is not a need to capture the current sort column in the headerRelease event which many offered solutions suggested. Another benefit to this solution is that keyboard initiated sorting is handled also. Whereas the headerRelease event is only triggered by a mouse click on the column header and special handling is required if the user uses the keyboard to access the column header.
One point that I don't understand is how ascending/decending order is determined. Behavior seems to be different between a single SortField versus multiple SortFields. Notice how the compareResults are handled for the different situations. Anyone out there know why???
private function colSortCompareFunction(obj1:Object, obj2:Object, fields:Array = null):int{
     var compareResults:int = 0;
     var newObj1:Object = new Object();
     var newObj2:Object = new Object();
      // should not be a condition that is met
     if (_dataProviderDetails.sort.fields == null)     {
          var s:Sort = new Sort();
          var f:Function = s.compareFunction;
          return f.call(null, obj1, obj2, fields);     }
     // when a single column is selected for sorting
     else if (_dataProviderDetails.sort.fields.length == 1)     {
          var firstFld:SortField = _dataProviderDetails.sort.fields[0];
          newObj1[firstFld.name] = stripHTML(obj1[firstFld.name]as String);          newObj2[firstFld.name] = stripHTML(obj2[firstFld.name]
as String);
          compareResults = ObjectUtil.compare(newObj1[firstFld.name], newObj2[firstFld.name]);
           return compareResults;     }
     // when multiple columns are selected for sorting
     else       {
          for each (var fld:SortField in _dataProviderDetails.sort.fields)          {
               newObj1[fld.name] = stripHTML(obj1[fld.name]
as String);               newObj2[fld.name] = stripHTML(obj2[fld.name]
as String);
               compareResults = ObjectUtil.compare(newObj1[fld.name], newObj2[fld.name]);
                if (compareResults != 0)               {
                    if (fld.descending)                    {
                         return compareResults * -1;                    }
                    else                      {
                         return compareResults;                    }
           return compareResults;     }
Does anyone see any problems with this solution?
NOTE: stripHTML(String) is a simple function using regular expression to remove HTML tags.
Thx

I am writting a test using a sequencer to test for multiple button click

I'm using flex sdk 4.1 and have a situation where a button click is sometimes called twice. I am writting a test for this using a sequencer and it will run for at least one button click, what I am not sure is how to test for multiple click events(which shouldn't happen, but occours randomly in my project)
package tests.view
    import flash.events.MouseEvent;
    import flexunit.framework.Assert;
    import mx.events.FlexEvent;
    import org.flexunit.async.Async;
    import org.fluint.sequence.SequenceEventDispatcher;
    import org.fluint.sequence.SequenceRunner;
    import org.fluint.sequence.SequenceWaiter;
    import org.fluint.uiImpersonation.UIImpersonator;
    import views.AddComments;
    public class TestAddComments
        private var view:AddComments;
        [Before(async,ui)]
        public function setUp() : void
            view = new AddComments;
            Async.proceedOnEvent( this, view, FlexEvent.CREATION_COMPLETE, 600 );
            UIImpersonator.addChild( view );
        [Test]
        public function testButtonClick():void
            view.addCommentBtn
            var sequence:SequenceRunner = new SequenceRunner( this );
            sequence.addStep( new SequenceEventDispatcher( view.addCommentBtn, new MouseEvent( 'click', true, false ) ) );
            sequence.addStep( new SequenceWaiter( view.addCommentBtn, MouseEvent.CLICK, 100 ) );
            sequence.run();

The only way you could test for that type of circumstance... one where something may happen... is to do so with a timeout. In other words, you cannot let the test pass simply because the first event occurred.
Two ways to handle this... with sequences:
Instead, you write a test that expects 2 clicks. In the assertion handler (which would only be reached if both clicks occur) you would fail the test:
fail('i shouldnt be here');
In the Waiter for the 2nd click, you would specify a timeout handler. That timeout handler will get called in the 2nd click does not occur in the specified time... (finding that time is the hard part). The default timeout handler fails the test, however, in your case, your timeout handler would just happily do any assertions needed and move on. A timeout does not necessarily mean failure... in your case, it is correct
Second choice:
You could create a timer. Create an event handler for the button click which increments a counter. Start the timer, do your test. However, have your test pending on the timer's completion rather than something like the click.. In that case, you would then be able to just check the count:
private var clickCount:int = 0;
[Test]
public function testButtonClick():void {
     var timer:Timer = new Timer( 100, 1 );
    Async.handleEvent( this, timer, TimerEvent.COMPLETE, checkClickCount );
     view.addCommentBtn.addEventListener( 'click', function( e:Event ):void { clickCount++ } );
     view.addCommentBtn.dispatchEvent( new MouseEvent( 'click;, true, false ) );
private function checkClickCount( e:Event ):void {
assertEquals( 1, clickCount );
However, I can't imagine how the test you are describing could ever yield more than one click event... I am guessing the problem is elsewhere, but this will help you verify
Mike

Sort sequence changes for batch determination

Dear pankaj
my client already using the "batch number" acending order sort method.
now i have to change to the FEFO concept.
i have to create new sort sequence in CU70..........?
because i deleted the existing one in CU71 and enter the FEFO .but it is not working.
PLEASE GIVE THE HIGH PRIORITY
regards

hi pankaj again i am distrubting you
1)The character and class are already existing for shelf life expiry so i think no need to create again.
2)my client using class type 22 (MCH1) for FIFO method.now i am using the same class type.
3) In CU70 i created one new sort sequence by coping the existing one and change the name.
4) Sort rule is maintaining the plant level.already the are maintain the "0" value in the selection type in MSC1.
5)In IMG side ,i maintained the strategy type for production and inventory.
still i have problem.
for normal goods issue MB1A-261 (based on the manual reservation) .If i put * in batch no column,then it will take the sort sequence.but it is not giving.if i gothough the WITH OUT BATCH view it is giving the all batches by order.
If i check the batch details of the received batch,it has "INCOMPLETE" status.
what i have to do?
please reply me

Sort Sequence for Multiple TO

Similar Messages

Maybe you are looking for