Sort the details record

Hey,
I got a problem...
I have a form which has master (say A)and detail (say B) table information displayed. When I query the master the corresponding details records are also displayed in the form. But the details records which are fetched automatically in the form are NOT SORTED out according to my criteria.
Can anybody tell me how to do this???
-Ganesh

Ganesh,
how and where do you set this criteria? Are you setting the order by property on the block?
Frank

Similar Messages

How to print blank records after the detail records in a masterdetail report

Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

Your solution works when I am not limiting the no. of records per page for a department to 10 records and when I want to print blanks lines for the depts that has fewer than 10 employees in it.
Exactly in my report I have several dept's that has more than 10 emp's. In such cases I'll be printing first 10 in one page and the rest in the next page. Now I want to dynamically print the blank lines in the second page depending on the no. of emp's on that page. I tried to acheive this by using a CS column that reset's at page level but, REPORTS is not letting me use CS column that reset's at page level in a format trigger. I also tried to copy the CS value into a parameter and or to a Place holder column and did not help.
Any more work around ideas to acheive this?? please help.
Thanks alot
Kavita.
Hi
Create a column called Serial_No in ur emloyee query like this
select 1 , empno ,ename from emp;
Create a summary column on the serial column with the function SUM
and resetting it to Page
Display the column in the report by using the text color as white
so it doesn't display in the report
I think this should help u i believe
Sri
Hi,
Developing a report for time and attendance record. In this report I am printing all the employees in a department, limiting the no. of records per page to 10.
I need to insert blank lines at the end of all of the detail records in a page that has less than 10 employee records so that the no. of records displayed on a page can always be 10(these blank lines will facilitate the management to note down the temporary employees who worked for the department but are not part of the department).
I am using a tabular form with group above layout.
The report layout is as follows:
Department : FINANCE & ADMINISTRATION
Employee Name | Employee Number |
1 Jim | 1234 | _________________
2 John | 5678 |__________________
3 blank
4 blank
5
6
7
8
9
10 balnk
Supervisor's Sign:______________________
Note: the no. of blank lines should be inserted dynamically based on the no. of emp. records being printed on the page.
Any help is greatly appreciated.
Thanks in advance.
Kavita.

Restrict the detail record based on the record indicator

Hi, i have a master detail form
when i query the form at header block it shows all the headers say
header block
header, line num, desc
1, 1, pen
1 ,2, rubber
1 ,3, sketchpen
line block
line num, sub item ,cost
1 ,1.1, 50
1 ,1.2, 60
2 ,2.1, 70
2, 2.2, 5
it shows the output in this way
i want to restrict the line level block (say if my cursor is at record indicating row 1 in header) then in line level it should show
lines pertaining to line num 1 and header 1 --eg pen records
if my cursor is at line num 2 in header block, in line level block it should show only line num 2 details ie rubber details, how can i restrict this.
Thanks,

Define the relation between header and detail
join condition : header.line_num = detail.line_num
delete record behaviour : non-isolated
prevent masterless operations : Yes
after this if you navigate, the detail records will automatically gets queried accordingly.
Regards
Dora

Not to show the detail records even though the mater records are existing.

Dear Oracle
I would like not to show the detail records even though the mater records are existing. Is there any block preperty I can set?
Thanks

I don't know the reason why you would want to do that but if you do not want to any record in the master block in
a master-details format, then you could achieve this by setting the WHERE clause property in the block.
e.g., master block DEPT (base table DEPT) and detail block EMP (base table EMP)
table DEPT is as follow
dept_id (pk)
dept_name
table EMP is as follow
emp_id
emp_name
dept_id (fk)
then you can set the WHERE clause in the DEPT block as follows
exists (select 1 from emp a where a.dept_id = dept.dept_id)
hope this help

Oracle 10gr2 Master/detail form running very slow when you navigate to the detail record.

Hi All, I have a master detail form, running in webserver, when I navigate to the detail block, the form start buffering and buttering for about 2 min. There is a trigger when-new-record instance that is firing when you navigate to a new record : The select part of this stament is taken a long time to execute. I modified this in toad and what used to take 25 seconds to run is taken less than a second now, but the slowness still persists in the form.
for rec in (select wrrh_col
                  wpbh_col_lvd,
                   wpbh_col_doc_no
      from wh_col,
           wkpl_col,
           wh_col
     where wrrh_col_no = :block.wreh_wrrh_col_no
       and wrrh_col_no = wreh_wrrh_col_no
         and wrrh_col_no = wpbh_col_no
       and wrrh_col_proj    = wpbh_col_proj
       and wrrh_proj_no     = wpbh_proj_no) loop
   if fun_name(rec.wpbh_col_lvd) = 'Y' then
    do something,
   end if;
end loop;
The select staement that used to run for 23 seconds is running in less than one second, but the form is still running very slow when I navigate to the detail record.
Please advise.
Thanks.

Thanks Andrea for your prompt response, the problem is the select statement and like I stated, I tuned the select statement in toad and what normally takes 23 secs is taking less than 1 sec to run. If I comment out the call to the function, it is still slow. The select stament will returned null and it will still be slow. When I comment out the for loop, it run very fast. I dont know what else to do than tuned the select statement.

How to sort the new records when you input them in a Forms bloc?

Hi,
I have a multi-record data block, how can I do to sort the records in this block when you enter some new records? for instance, you have a table(emp), 3 coloumns(empid, empname, deptno). when you enter new records, how can you do to make records order by deptno? not in quiry status.
Thanks. Please help me!

I think Steve has answered your question and I doubt that what Frank is suggesting is what you are actually trying to do.
However,
from the top of my head I don't know if you can set the order by clause on a datablock dynamically <<-Yes you can set it with set_block_property. You don't really want to put it in the where clause because if the user enters query criteria in database fields, they will get appended after the order by and the query will fail.

Sorting the table records based on date (stored as string in the database)

Iam storing the date as string(varchar2) in the database.
Date format: DD-MMM-YYYY hh:mm:ss am/pm
example: 12-MAY-1984 11:12:45 AM
now i have to sort the records in such a way that recent records should be displayed first, then past records.
i need help reagrding

Step one: Select from the table
Step two: Convert the string to a date
Step three. Order on this converted date descending (= recenct records first)

SUPPRESSING THE DETAIL RECORDS, URGENT

Hi,
I have a report, which has got three groups , G1,G2 and G3. Now G1 top group, G2 is the next group and G3 the last or the detail.
G1
||
||
G2
||
||
G3
The G1 and G2 has one database column each and some formula columns which is based on the database columns of G3. Now I am suppressing the repeating frame i.e. R_G1 which is based on Group G1 using the format trigger RETURN(FALSE). I am running the report to create a text file. The text file gets created. It Prints all the columns in G1 group, it does not print anything from group G3(as expected). But instead of printing all the columns of group G2, it just prints the DATABASE column of G2. all other summary columns and formula columns are blank. There is no data printed on that. Most surprisingly if I run the same report to the screen instead of file. It prints all the columns of group G2. Is this a bug ? or is there anything going wrong anywhere . Please help me . This is very urgent.
Thanks
Feroz

Hi Feroz
Check the following Repeating Frame Report Properties
(to ensure that formatting is not being suppressed or hidden):
a. Max Records to get:
- Should be set to 0 to allow for all returned rows to be formatted.
b. Base Printing On:
- Should be set to Enclosing Object
c. Print Object On:
- Set to 'default' (Setting to 'All Pages' will definitely cause problems as formatting can never take place in a repeating frame if the nested layers are set to this setting).
d. Print Direction:
- Ensure that this setting is correct for your type of formatting. See HELP>>>INDEX>>>"Print Direction" to understand the variables involved with this setting.
e. Page Protect:
- This should be set to OFF unless there is a specific know formatting
requirement. Protecting a page may disallow formatting to 'spill' into
the next formatted page.
f. Logical Panels:
- Typically not used unless explicitly set. Layouts formatted to page sizes larger than your paper size require Logical Panels set to > 1. Ensure your page size in report properties is set to the physical page size of
your printer. If this is not possible, you may need to implement Logical Panel featured. See >>INDEX>>>"Logical Panels" for complete explanation and understanding before use.
Thanks
The Oracle Reports Team

Sort the Valuenode records in table

Hi Experts,
Following is the code I wore to retrive and display Portal roles in a table. The context maintained is as follows and got the results properly. I want to know how to sort the table values by Role_Name?. Could some one help me?
[Value node]      Role_table
[Value Attribute] RoleID
[Value Attribute] Role_Name
[Value Attribute] PCD_Location
//Retrive the roles from the Role factory
String[] theroles = rolefact.getRolesOfUser(unique_id,true);
for(int i=0; i<theroles.length; i++ )
//Retrive user attributes and add to the context attribute values
String roleid = rolefact.getRole(theroles<i>).getDisplayName();
String rolename = rolefact.getRole(theroles<i>).getDescription();
String role_desc = rolefact.getRole(theroles<i>).getUniqueName();
IPrivateUserView.IRole_tableElement rowelement = wdContext.createRole_tableElement();
rowelement.setAttributeValue("RoleID",roleid);
rowelement.setAttributeValue("Role_Name",rolename);
rowelement.setAttributeValue("PCD_Location",role_desc);
//Append the roles obtained and bind to the rolenode
al.add(rowelement);
wdContext.nodeRole_table().bind(al);
Please help me with some code on how to sort the value node table?. I promise to award the points for the right solution. I appreciate coding help.
Thank you
Regards
Maruti

Hi Maruti,
1. Get the size of the node, save it in a variable say <b>si</b>
int si = wdContext.nodeRole_table().size();
2. Iterate as follows
for(int i=0;i<si;i++)
     for(int j=i+1;j<si;j++)
         if(wdContext.nodeRole_table().getRole_tableElementAt(i).getAttributeAsText("Role_Name").compareToIgnoreCase(wdContext.nodeRole_table().getRole_tableElementAt(j).getAttributeAsText("Role_Name"))<0)
         wdContext.nodeRole_table().swapElements(i,j);
Regards,
Mathan MP

Problem with Sorting Detail Records

Hello All,
I have an ODBC connection to our AS400 System and I am able to retrieve records in Crystal. I am trying to perform a sort on the Cost Center field and then on the Salaries Account field. These two fields are Alpha Numeric fields. I went to the Record Sort Expert and selected these two fields. However,the Salaries Account field does not sort. When I do Browse data for the Salaries Account (field 2) it is in Ascending Order. When the report prints the detail records within each cost center (the primary sort) the Salaries accounts do not appear sequentially. For example account 510110 appears before 510105. I do not understand why the Salaries Account would not sort?
I appreciate you input as to why this could be happening and how I could resolve this? I have exhausted evey thing I could think of but I just cant' get it to sort. You input is much appreicated.
thanks in advance.
Imty.

Hi Abhiash,
I don't see any dashes. The Cost Center sorts fine and is also Alphanumeric. The accounts are 6 digits. When I do Browse Data they appear in ascending order. So, It baffles me why it would be out of sequence when the detail prints out. See output below. Account 510110 appears before account 510105. This is in the account group view.
THIS IS BY COST CENTER AND ACCOUNT GROUPING *********
11002001     510100     LEE,DONNA R     01/29/2012
Sub Total     510100
11002001     510110     BEKKAIR,RADIA     01/29/2012
11002001     510110     BROWN,JILLEE S     01/29/2012
11002001     510110     SASPA,MADONNA T     01/29/2012
11002001     510110     THOMPSON,LISA Y     01/29/2012
11002001     510110     VAIL,SHEENA M     01/29/2012
11002001     510110     VANG,CHEN T     01/29/2012
Sub Total     510110
11002001     510105     COURTRIGHT,EMILY E     01/29/2012
11002001     510105     HUMPHRIES,CHRISTINA L     01/29/2012
11002001     510105     KALIFA-MAMAE,SILEPA T     01/29/2012
11002001     510105     MARTIN,KATHRYN M     01/29/2012
11002001     510105     MEYER,TRACY L     01/29/2012
11002001     510105     RODRIGUEZ,MICHELLE     01/29/2012
11002001     510105     SEXTON,JASMINE N     01/29/2012
11002001     510105     WILLARD,LISA     01/29/2012
Sub Total     510105
"Total11002001
THESE ARE THE DETAIL RECORDS. YOU CAN SEE CENTER 510110 APPEARS BEFORE 510105 EVEN THOUGH I HAVE
SPECIFIED COST CENTER AND SALARIES ACCOUNT IN THE RECORD SORT *******
11002001     510100     LEE,DONNA R
11002001     510110     BEKKAIR,RADIA
11002001     510110     BROWN,JILLEE S
11002001     510110     SASPA,MADONNA T
11002001     510110     THOMPSON,LISA Y
11002001     510110     VAIL,SHEENA M
11002001     510110     VANG,CHEN T
11002001     510105     COURTRIGHT,EMILY E
11002001     510105     HUMPHRIES,CHRISTINA L
11002001     510105     KALIFA-MAMAE,SILEPA T
11002001     510105     MARTIN,KATHRYN M
11002001     510105     MEYER,TRACY L
11002001     510105     RODRIGUEZ,MICHELLE
11002001     510105     SEXTON,JASMINE N
11002001     510105     WILLARD,LISA

Unable to sort the records of a table

Hi Experts,
I have populated one z table with records. The table coloumns are as below:
Mandt
Pernr
Personnel Area
Total Points
Rank
I have to sort the table records in descending order of Total Points. In many cases there will be same total points for many records. In such cases we have to arrange records in following fashion:
If more than 1 person have same total points then person having more years of service will have higher rank
If more than 1 person have same total points and same years of service then older people (date of birth) will have higher rank.
I have written following program. It is not working. Please help me. If you have some ready made code, please share with me.
Regards,
Gary
IF NOT itab_prio[] IS INITIAL.
      CLEAR v_index.
      v_index = 1.
      SORT itab_prio BY z_prio_pts DESCENDING .
      itab_rank[] = itab_prio[].
      LOOP AT itab_prio.
*---Check eligibility.
        CALL FUNCTION 'zmy_prg_CHECK_ELIGIBILITY'
          EXPORTING
            pernr = itab_prio-z_pernr
          IMPORTING
            return = return.
        IF return-type = 'E'.
          itab_prio-z_prio_pts = 0.
          itab_prio-z_prio = 0.
          MODIFY itab_prio TRANSPORTING z_prio_pts z_prio.
        ELSE.
          LOOP AT itab_rank WHERE z_prio_pts = itab_prio-z_prio_pts
                            AND   z_pernr    NE itab_prio-z_pernr.
*---Get Hiring date for same rank.
            CALL FUNCTION 'zmy_prg_GET_EMP_HIRING_DATE'
              EXPORTING
                pernr       = itab_rank-z_pernr
              IMPORTING
                hiring_date = hire_new.
*---Get Hiring date of update emp.
            CALL FUNCTION 'zmy_prg_GET_EMP_HIRING_DATE'
              EXPORTING
                pernr       = itab_prio-z_pernr
              IMPORTING
                hiring_date = hire_old.
            IF hire_old = hire_new.
*---Check for Birth date of both employees.
              READ TABLE it_date WITH KEY pernr = itab_rank-z_pernr.
              IF sy-subrc = 0.
                hijri_new = it_date-zzhdob.
              ENDIF.
              READ TABLE it_date WITH KEY pernr = itab_prio-z_pernr.
              IF sy-subrc = 0.
                hijri_old = it_date-zzhdob.
              ENDIF.
              IF hijri_old > hijri_new.
                flag = 'X'.
              ENDIF.
            ENDIF.
          ENDLOOP.
          IF flag NE 'X'.
            itab_prio-z_prio = v_index.
            v_index = v_index + 1.
            MODIFY itab_prio TRANSPORTING z_prio.
          ELSE.
            itab_prio-z_prio = v_index.
            v_index = v_index + 1.
            MODIFY itab_prio TRANSPORTING z_prio.
          ENDIF.
        ENDIF.
        CLEAR : flag , return.
      ENDLOOP.
      MODIFY zhop_priority_pt FROM TABLE itab_prio.
      COMMIT WORK.
      IF sy-subrc = 0.
        MESSAGE i000(zz) WITH 'sucessfully generated'.
      ENDIF.
    ENDIF.
ENDIF.
ENDFORM.
Please use code tags to format your code
Edited by: Rob Burbank on Sep 29, 2010 1:59 PM

Gary,
Firstly, to make things easier, I suggest you add service and age columns to your internal table.
Mandt
Pernr
Personnel Area
Total Points
Service
Age
Rank
Does your internal table itab_prio contain large number of rows? Is the code that determines service and age performance intensive? If the answer is 'NO', then I suggest you populate service and age for every row and sort. This will make the logic simple and easy to maintain.
If you must query service and age only when there is a conflict, then following logic should help.
- itab_prio_copy[] = itab_prio[].
- Loop at itab_prio.
-   l_next_row = sy-tabix + 1.
-   read table itab_prio_copy index l_next_row.
-   are points same?
-     get service for both the employees.
-     is the service same for both?
-       get age for both.
-    rank accordingly
- endloop.
I know I have skipped a lot of gotcha points. For example, how to handle the last row, how to update the rank to the next row, etc. I am sure you can figure that out.
Good luck.

Formula field, Detail records not getting updated

Hello seniors,
i need help on 2 issues;
first, Issue No. 1
i have master-detail form with the following tables;
POH                                  master record table
PH_NO                              pk
PH_PARTY
PH_FXRATE                       exchange rate
PH_PD_LOCAL_TOT           total of PD_LOCAL_AMT from details records
PH_PD_FOREIGN_TOT       total of PD_FOREIGN_AMT from details records
POD                      Detail records table
PD_PHNO              fk
PD_ITEM
PD_QTY
PD_PRICE
PD_LOCAL_AMT
PD_FOREIGN_AMT
M_PD_FOREIGN_AMT       Formula (PD_QTY * PD_PRICE)
M_PD_LOCAL_AMT           Formula (M_PD_FOREIGN_AMT/PH_FXRATE)
CTRL                 Control block
M_PH_PD_LOCAL_TOT           Summary-Sum-Table=POD, Field=M_PD_LOCAL_AMT
M_PH_PD_FOREIGN_TOT       Summary-Sum-Table=POD, Field=M_PD_FOREIGN_AMT
Triggers
POH Table
Pre-Insert   and   Pre-Update
:PH_PD_LOCAL_TOT := :M_PH_PD_LOCAL_TOT
:PH_PD_FOREIGN_TOT := :M_PH_PD_FOREIGN_TOT
POD Table
Pre-Insert   and   Pre-Update
:PD_LOCAL_AMT := :M_PD_FOREIGN_AMT
:PD_FOREIGN_AMT := :M_PD_LOCAL_AMTThe problem that i am facing is while i UPDATE a record.
whats happening is when the form is in Query mode and if i change a record, lets say
change the value of the field PH_FXRATE, then what happens is, on screen i get all Detail
record's M_PD_LOCAL_AMT Calculated & Updated, but the actual db field PD_LOCAL_AMT remains unchanged
in the database after i press F10 or Save button.
The update takes place for the POH table and form displays 1 Record updated.
whereas if i have for example 4 detail records, then form should update those as well and display finally
5 records updated is'nt it..?
In query mode,if i insert new or modify an existing record in the detail block, then at this point, form marks just
that particular record as CHANGED. Thus making changes at db level only for this particular record.
what i want is once i make changes to the field PH_FXRATE, then form should mark all detail records
as CHANGED and on saving, the PRE-UPDATE tigger of POD table should come in to force and the changes
in the values of M_PD_LOCAL_AMT in turn to the db field PD_LOCAL_AMT should get affected at db level.
i have also tried to put these assignments
:PD_LOCAL_AMT := :M_PD_FOREIGN_AMT
:PD_FOREIGN_AMT := :M_PD_LOCAL_AMT
at PRE-UPDATE of POH table, thinking that form might consider
all detail records, at this point. i noticed that it does it, but only picks
1 record (i guess just the first record always) and change a db level.
No. 2 Issue:
i have put a POST-FORM-COMMIT at form level for auditing the Total fields of POH table against the details records.
Declare
     M_LC_AMOUNT NUMBER(13,3);
              M_FC_AMOUNT NUMBER(13,3);
Begin
     SELECT SUM(PD_LOCAL_AMT) INTO M_LC_AMOUNT
     FROM POD
     WHERE PD_PHNO = :PD_PHNO;
     IF :PH_PD_LOCAL_TOT != M_LC_AMOUNT THEN
          :PH_PD_LOCAL_TOT := M_LC_AMOUNT;
     END IF;
     SELECT SUM(PD_LOCAL_AMT) INTO M_FC_AMOUNT
     FROM    POD
     WHERE PD_PHNO = :PD_PHNO;
     IF :PH_PD_FOREIGN_TOT != M_FC_AMOUNT THEN
          :PH_PD_FOREIGN_TOT := M_FC_AMOUNT;
     END IF;
End;i was testing and notice that in a query mode when all records are displayed.
if i go on changing values on records and save or save later keeping the form open,
form allows, but if 1 come back to a record which i may have changed and saved earlier, then it flashes Error;
"Records has been changed by another user, requery to ..."
i want to do an Audit before final db-Commit and keep the user free from this Error..
Please tell me first of all, is my approach for both of my issues,correct.?
if not, then please suggest what should be changed.
i'll highly appreciate for all your help. TYVM. Regards.

I did exactly as you suggested. It works well for new record insertion
but when i press F7 to query it, its flashes messages before displaying detail records
Field must be entered.
Mr. Andreas,
i have problem only when i change value of PH_FXRATE. It re-calculates on screen values for M_PD_LOCAL_AMT
(Formula M_PD_FOREIGN_AMT/PH_FXRATE)
i want the changed value of M_PD_LOCAL_AMT to be saved in the actual db-field PD_LOCAL_AMT.
for this i have PRE-UPDATE on POD Table
:PD_LOCAL_AMT := :M_PD_LOCAL_AMT
:PD_FOREIGN_AMT := :M_PD_FOREIGN_AMT
Which is doing that.It is not marking the detial record as CHANGED.
I tried giving the above assignments in the PRE-UPDATE on POH table.
It saves the changed value in the db-field, but not all detail records, if more than 1.
what you have suggested, will get me acheived what i am looking for..?

View detail records from interactive report with button press

Hi I want to create a intractive report that will have a + sign for the user to expand the detail region below the record.
Thanks.
PKP

thanks kartik,
I did exectly what is there in there. But I am having problem in display. I have put my application in
http://apex.oracle.com/pls/apex/f?p=44031:1
login as GUEST/password
select Company Accounts Management from Application Menu --> setup tab -> Companies from setup menu
the detail record is not displaying. correctly.

Master Detail Form - How 2 update a field in the Detail form using a query?

Hello,
I have a master detail form with, each master record having a fixed(6) number of detail records. One of the fields in the detail record is the PART_DESCRIPTION field. I am trying to update this field by querying Table_X. TABLE_X is in the format of (desciption id, description). Description id runs from 1 to 6.
When the form displays, the PART_DESCRIPTION field for the 6 detail records needs to be automatically populated with the six values of description stored in Table_X. How can this be done?
Tried using session storage objects, but made no headway.
Would greatly appreciate pointers on how to go about doing this.
Thanks.
Dev

If you are on a Portal Version lesser than 3.0.9.8.3, then please try the following to populate
the PART_DESCRIPTION field.
Steps:-
1> Edit the form and go to the Additional PL/SQl section and put the following code in the
"...after displaying the page area" :-
declare
type t_vc_arr is table of varchar2(4000) index by binary_integer;
l_arr_desc t_vc_arr;
l_form_name varchar2(200);
l_form_state varchar2(500);
begin
l_form_name := p_session.get_module().get_name();
l_form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE'
if l_form_state = 'QUERY_AND_SAVE' then
select description
bulk collect into l_arr_desc
from <schema>.table_x;
htp.p('
<script>
var descArr = new Array();
var Fidx = 1;
var formObj = document.WWVM'||p_session.get_id()||';
var fieldName = "'||l_form_name||'.DETAIL_BLOCK.PART_DESCRIPTION.0";
for i in 1..l_arr_desc.count loop
htp.p('descArr['||to_char(i-1)||']="'||l_arr_desc(i)||'";');
end loop;
htp.p('
for (var i=0; i < formObj.length; i++){
if (formObj.elements.name == fieldName+Fidx){
formObj.elements[i].value = descArr[Fidx-1];
++Fidx;
htp.p('</script>');
end if;
end;

How to call the 'DETAIL' function in ALV for a program?

Dear Friends,
I have a prf_tree (TYPE REF TO cl_gui_alv_tree), and I added below codes to add an new button for displaying the detail record, it works fine:
CALL METHOD prf_toolbar->add_button
    EXPORTING
      fcode     = prf_tree->mc_fc_detail
      icon      = icon_detail
      butn_type = cntb_btype_button
      text      = ''
      quickinfo = 'Show Details'.
Everytime I click this new button, a window will popup and display the record details.
My question is: how to call this standard function ('DETAIL' function) in a program? for example:
CASE ldf_ok_code.
    WHEN gcf_okcode_save.
      PERFORM okcode_save.
    WHEN 'SHOW_DETAIL'.
      CHECK gdf_nodkey_9003 IS NOT INITIAL.
      PERFORM SHOW_DETAIL.(How to write this code to display the detail data of the selected record?)
Thanks a lot!

Hi,
Go for Interactive Reporting
like When u click on the output then it will show the Detail report u want .
for that purpose Pls
Use Hide command .
And call another report
by using SUBMITT Program

Sort the details record

Similar Messages

Maybe you are looking for