Sound card Installer will not launch

Hello folks,
I've downloaded & tried to install a Roland UA-1EX USB sound card driver for OS 9 and the installer will not launch.
I already use the unit with OSX.
Usually these are VISE installers with a blue icon but this one decompresses into a white generic document.
I have had exchanges with technical support & whilst being helpful he swears the file is ok.
I used Filetyper to look at the file to see if I could correct the filetype & tried comparing to other similar installers but with no success.
I have a ResEdit to but don't know how to use it.
I went to the ftp site & downloaded it from there as opposed to the support site, still no joy.
I've tried different ways of decompressing & checked on my other computers but I can't get it to launch.
I get the feeling he is not actually loading it up on an OS machine but I haven't come out & said it...
Can anyone help?
here's a screenshot of the windows...
http://www.swampnet.demon.co.uk/pix1/installer_problem.png
Cheers,
Steve

I found that download off a link on this page:
http://www.rolandus.com/products/productdetails.php?ProductId=743
It is full of warnings that it cannot be used or installed under Classic.
I must also give you the usual warning that any Mac software (Applications and some other files) unpacked on a PC will be damaged beyond repair. Final unpacking MUST be done on a Mac.
When I unpack the .sit file, I get an Installer vise 3.6 Lite Installer file, plus the other files shown in your windows. They do not have blank Icons.
Have you tried rebuilding the OS 9 Desktop File lately ? (Hold down Command and Option when the Finder is starting up.) This sometimes solves such problems.

Similar Messages

  • Tecra sound card driver will not install "driver was not installed" message

    Hello
    I have a Tecra 9100,running XP pro with s/p 2 and when I try to install the Yamaha AC-XG sound driver it will unzip the files then looks like he's loading the files thru InstallShied, but then a error message comes up "driver was not installed" I have tried several different ways but no success,any help would be greatly appreciated.

    Hi,
    You are using now 6.10.6159.0 D (SP43935.exe) version? Right?
    So uninstall Your audio drivers and try to install previous version 6.10.6087.60 C from here.
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • EOS Utility Installer WILL NOT LAUNCH

    I'm running OS X 10.10 and trying to install Canon EOS Utility 3.0.1b on my mac and every single time I click the installer in begins to extract, then blips in the dock for a split second....then nothing. I have no idea what the heck is happening. I've gone into my settings and made sure I can install applications from anywhere but it still refuses to launch the installer. I'm not even getting a crash report; it just opens and closes in the blink of an eye, and my SSD isn't THAT fast...

    Did you get to the bottom of this? I am having the same issue.  Console comes up with this when I try and click on the installer:
    03/03/2015 11:21:54.901 UniversalInstaller[968]: objc[968]: Class CmdUtil is implemented in both /var/folders/xh/r2hqj9bs45qb7s3_3h4dl50h0000gn/T/CanonOFI_TEMP/Data/Software/In stall/UniversalInstaller.app/Contents/MacOS/UniversalInstaller and /var/folders/xh/r2hqj9bs45qb7s3_3h4dl50h0000gn/T/CanonOFI_TEMP/Data/Software/In stall/UniversalInstaller.app/Contents/Frameworks/UIx.framework/UIx. One of the two will be used. Which one is undefined.
    Please does anyone have any ideas?

  • Installation will not launch

    Hi,
    I signed up for the monthly acrobat pro and followed link from email to download file.  I exe the download file and everything seems download and install (no errors) but right at the end of the install when its asking me to launch acrobat, the AMD catalyst installer starts asking me to reinstall my video card driver support.  Not sure if they are connected but the AMD driver stuff is working good, the acrobat fails to launch with NO errors.
    Please not there was an old version of acrobat pro installed but I uninstalled it but it told me it could not deactivate the license, which I have idea why.
    Thanks in advance for any help.
    Dave

    Correction:  I have NO idea why lic would not deactivate. 

  • I-tunes will not launch

    I can not get my i-tunes to launch in normal mode or safe mode,
    I have uninstalled, reinstalled & rebooted, as well as repairing apple support 32 and 64 bit in programs
    My OS is windows 7
    I get the error:
    Problem signature:
      Problem Event Name: APPCRASH
      Application Name: iTunes.exe
      Application Version: 12.1.1.4
      Application Timestamp: 54de1991
      Fault Module Name: CoreAudioToolbox.dll
      Fault Module Version: 7.9.9.6
      Fault Module Timestamp: 54ddd41b
      Exception Code: c000001d
      Exception Offset: 00000000001fa332
      OS Version: 6.1.7600.2.0.0.256.1
      Locale ID: 1033
      Additional Information 1: 489e
      Additional Information 2: 489e86f4bd8dff3cc372f7b668fe2d83
      Additional Information 3: 6a08
      Additional Information 4: 6a0863f0c4c0e7b6aeef7af4c530d77d
    Any thoughts would be appreciated
    Thx

    Hi teamfoowa,
    Thanks for using Apple Support Communities. Based on what you stated, it sounds like iTunes will not launch. I would recommend that you read this article, it may be able to help the issue.
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Cheers,
    Mario

  • Creative Cloud Creative Cloud Photoshop installs but will not launch

    Hi, my Creative Cloud Photoshop latest version installs but will not launch. When I try it opens a page with a long error code report. I uninstalled and reinstalled Photoshop several times with the same result. I downloaded and tried the Adobe Creative Suite Cleaner Tool, as I found as a solution in the help forum, but since I uninstalled Photoshop before I ran the Cleaner Tool there are installed applications, and AdobeCreativeCloudDriver. Should I hit the clean all CS6 button at the bottom of the window. There is nothing including Photoshop in this list.
    --Creative Cloud Creative Cloud Photoshop installs but will not launch

    You will have to provide system info and the exact errors. Nobody can help based on vague "This doesn't work" posts.
    Mylenium

  • CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from

    CS5.5 and OSX 10.9.4: Most applications will not launch even after uninstalling and reinstalling the Creative Suite 5.5. After my 2011 MacBook Pro 17 died, I had to purchase a new MacBook Pro 15 to replace it.  I performed a Time Machine installation from that 2011 machine, and only Distiller and Acrobat would launch (none of the rest of the creation apps).  So I ran the CS5.5 installer, uninstalled, then reinstalled, producing the same result. When I try to launch, nothing happens.  What next?

    Try...
    Adobe Creative Suite Cleaner Tool
    helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
    http://www.adobe.com/support/contact/cscleanertool.html

  • Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. Could anyone give an amateur from Norway a hint of what may cause the problem? And I can not find the installation-disc for Office...Super! :)

    Suddenly all of my Office-programs have stopped working and will not launch on my MacBook. They were all already installed when I bought the computer. Could anyone give an amateur from Norway a hint of what may cause the problem? (And I can not find the installation-disc for the Office Programs...Super!)

    Have you contacted Microsoft support - http://www.microsoft.com/mac/support ? 

  • Just joined CC. Download of CC Installer is corrupt. Will not launch. Cannot download working apps like PS. Can't find help. Will not uninstall to start over. Says it has to quit first but it isn't running. HELP!

    I am frustrated! CC Installer will not install or uninstall. I can't download any of the apps. I need to get this done and get back to work.

    First, use Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 to remove corrupt install
    Link for Download & Install & Setup & Activation problems may help
    -Chat http://www.adobe.com/support/download-install/supportinfo/
    OR
    Some download & install troubleshooting links
    -Comodo Security kills download http://forums.adobe.com/thread/1460361?tstart=0
    -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html
    -http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html
    -http://forums.adobe.com/community/download_install_setup
    -http://helpx.adobe.com/creative-cloud/kb/troubleshoot-cc-installation-download.html
    -http://helpx.adobe.com/x-productkb/global/errors-or-unexpected-behavior-websites.html
    -http://helpx.adobe.com/creative-cloud/kb/unknown-server-error-launching-cc.html
    -Server won't connect https://forums.adobe.com/thread/1233088
    -SPECIAL FOR MAC USERS
    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922
    -more Mac 10.9.3 https://forums.adobe.com/thread/1491469
    -Enable Mac Root User https://forums.adobe.com/thread/1156604
    -more Root User http://forums.adobe.com/thread/879931
    -and more root user http://forums.adobe.com/thread/940869?tstart=0

  • Lightroom 3 Will not launch

    Windows 7 with lots of ram and I7 proc.
    LR3 has worked for years on this system.
    I have deleted the preference file.
    I have uninstalled and reinstalled several times, both from the origional disc and download from adobe.
    The software still will not launch.  How can I fix this?

    Well, it certainly sounds as though there's a possible problem within your user profile. How you proceed will largely be dependent upon the effort involved in moving all your settings (i.e. for all your other applications) over to a new account. For me it would be a bit of a PITA, though maybe something like WET (Windows Easy Transfer) could be used (it's intended use is to copy all your settings to a new installation, but it may be possible to use it in this context). Maybe a repair re-install of Windows 7 might fix it. Other than that, I'm fresh out of ideas, but maybe try the Windows 7 Forums, as this seems more of a Windows issue than a Lightroom problem?
    One last thought: does your own user account have admin privileges? Even if it does, have you tried right-clicking on the desktop icon for Lightroom and selecting "Run as administrator"?

  • Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

    Since I uploaded the new OS X Mavericks the App Store, Messages, Notes, Calendar, Maps and Preview will not launch/open. In Finder cannot find my files. Most crucially cannot upgrade OS X Mavericks software. I had two apple ID's, the old one not used

    Please read this whole message before doing anything.
    This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
    Step 1
    The purpose of this step is to determine whether the problem is localized to your user account.
    Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
    Step 2
    The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Please take this step regardless of the results of Step 1.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

  • X-FI AUDIO CONSOLE WILL NOT LAUNCH

    have ran x-fi card fine for 3 months and after re-installing it after moving it for new graphics card the audio console will not launch ! I get the message device not on this computer even though its working fine i just cannot launch the console to adjust settings ! have checked no old drivers left, onboard sound is disabled and device manager says no probs with x-fi card . HELP ME !!!!!!!!!!

    Mine hasn't been resetting....so far. I know mines a Fatalty but sw wise it should be same for all the cards. The only thing I can think of is that it has something to do with option for syncing with control panel. I have that option unchecked in the creative mixer speakers tab. Maybe try disabling it if its currently enabled and see if that stops the resetting. No idea if it will help but thats the only thing I can think of, can't hurt to at least give it a shot.
    Hope it helps

  • BB Desktop Software will not launch

    PC, running Windows XP  - Upgraded to new BB Desktop Software.  Was working for about a month.  Now, Will NOT launch - getting Windows Error
    Error Signature:
    EventType : clr20r3     P1 : rim.desktop.exe     P2 : 6.0.1.18     P3 : 4cfdab9c
    P4 : microsoft.practices.composite     P5 : 2.0.1.0     P6 : 4cfdaa3a     
    P7 : 12b     P8 : 50     P9 : sclhiaanmqhkf4zdfpvvwejkphnm1zuj 
    I re-connected to BB and loaded the "fix" versus the fuill version and still cannot load.
    From the Windows Control Panel - Removed the BB Desktop Software and re-booted the PC.  Re-Loaded the full Desktop Software from the BB website.  Still NOTHING - except for the Windows errror.
    Dead in the water.  Cannot launch the BB Software to connect and synch BB Storm!  iPhone on Verizon is looking better and better.  Mid-February is NOT coming soon enough. 
    Help! 

    WaynePharm wrote:
    OK  Instead of dueling each other, the issue is my Problem.  If you want to 'duel', please take it off-line.
     No one is "dueling" , we are tying to fix your problem.
    Re-stating my Problem:
    1.  I had loaded BB DM6 on a Windows XP PC about 3 months ago with no problems.  In fact, it linked with all aspects of Outlook that I needed  (Calendar, Task and Contacts).  Yeah!!  This did not happen with the 'original' BB DM that I loaded January 2009 when I bought the BB Storm from Verizon, but I lived with this short coming of BB.  Built my calendar and contacts directly into the BB Storm.
     So the original installation of the desktop manager software loaded in January 2009 did not correctly function with Outlook.
    2.  OK.  So something happened last week and the BB DM6 will not launch without getting the error message that I put in my 1st Posting of this Problem.
    "So something happened". We can only go on your description of the problem. If you have no idea what happened  i couldn't possibly know.  The only "guess" would be an there was an auto update to existing software or you have added software.
    3.  I went to BB and loaded the "Fix" for PC.  Also, this did not Launch BB DM6.
    4.  Unloaded the BB DM6 with the Windows XP Control Panel "Remove Program".  Re-Booted the PC.  Then, went to BB and reloaded the BB DM6.  Same error message and no Launch.
    Try using the repair/modify option in the Remove Program function on the DM installation currently loaded on the PC.
    5.  I am far from the "Techie" that the respondants to this Problem are!!  I am a SIMPLE End User of this BB Storm having mucho problems ... all of a sudden ... last week after using BB DM6 without the problems.
    6.  What can a SIMPLE, non-techie End User do?  From the Respondants Postings .. I am reading about Loading Roxio for BB DM from the Roxio website?  Also, reading about that the Unload from the Windows XP Control Panel, Remove Programs, is incomplete for the removal of the BB DM6.  I am being directed to removing 'hidden' files/keys as directed in a BB Problem Solving Posting for the CLEAN Removal of BB DM6--- which is surely not written for the SIMPLE, non-techie End User!!
    The error indicates a problem with some Roxio software. If you were using DM with Media manager prior Roxio was a part of that software, or you are running Roxio software.The Roxio information I gave you was to remove Roxio drivers not load Roxio software.
    In your description of the January 2009 install  there were problems with the install that were never correctly addressed. What we are suggesting is to remove all traces of the Various installation of desktop manager which includes editing the registry. That is why using Windows remove programs is not sufficient.
    Once complete you will be installing a fresh copy of DM on your system, this will ensure that the DM software can correctly integrate wit both Windows and MS Outlook
    The install procedure is SUGGESTED as the best resolution to your problem. Whether you run it or not is your decision.
    7.  In simple non-Techie language for this SIMPLE, non-techie End User ... what can I do to fix the problem and be able to launch BB DM6 from my Windows XP PC??
     This is as plain "non-techie" as I can write it.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you plea

    I had a repair done on my MacBook Pro and had to have a new hard drive installed. The Apple Auth Repair Shop then updated the OS from 10.6.8 to 10.7.5. Now my iPhoto v 9.2.3 will not open and it sounds like it will not work with this OS. Can you please advise?

    You may need many other updates to retain compatibility with Lion. I suggest you reinstall Snow Leopard. Unfortunately, you will need to erase the drive first. Be sure to backup your data if you haven't done so already.
    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • I get a crash notice. Firefox will not launch at all -- it keeps giving crash notice. I also cannot generate a crash report. I have uninstalled and reinstalled -- same issue. It does not launch.

    Firefox crashed this morning. It will not launch even after being uninstalled and reinstalled. All I can get is a crash box. It will not relaunch in any way
    == This happened ==
    Every time Firefox opened
    == this morning -- it did not open ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.0.3705; .NET CLR 1.1.4322; Media Center PC 4.0; yie8)

    This sounds the same as my issue. I was browsing in Firefox v6.0 last night and all of a sudden it closed with no notice or error message. When I tried to open FF I received the messaga; We're Sorry - Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts." I does not restart. I have been using IE to browse for a solution and nothing works other than opening as administrator. Now this problem is only on one of my laptops and is fine on my desktop and other laptops so it appears to be something specific to my laptop which is running Window XP Home and Service Pack 3.
    Some suggestions were to change the profile (did not work), end the firefox.exe process in task manager (not running in processes) and delete an xpicleanup.exe (not listed).
    The only thing that works is to run as administrator but I have to do this everytime. Is ther a solution?
    file.

Maybe you are looking for

  • Error while filling IT0031 "Employees could not be linked"

    Hi Experts! I am getting the error message "Employees could not be linked" while filling the infotype 0031 (Reference personnal number). I debugged through the standard program MP003100 and found that this error is related to CP relation (Central Per

  • Getting Error While Updating Schedule in agent

    Hi I am trying to Update Schedule in agent . i am getting below error.. My Work Repository mode is Execution. Kindly reply me immediate.. oracle.odi.runtime.agent.invocation.InvocationException: ODI-1274: Agent Exception Caused by: Could not find the

  • Can no longer sync my BB with my Outlook email..?

    I have already called my cell service provider which was of no help except to ask me to update my software (which I did), reboot (which I did), but still cannot syn the two together..This all since I had my power cut in my house about a week ago..Can

  • HAL won't start after install on DL585 G2

    I ran a v40z for years and recently had SRSS 5.2 on S11 running just fine. This past week I replaced the v40z with a DL585 G2 and reinstalled S11 and SRSS 5.2. Everything went well except now HAL won't start failing with, I suspect, a timeout after s

  • Internet connection glitch

    My TC was working fine, just turn on the power strip, wait for the TC green light, and click Safari. The PC upstairs was connecting wirelessly via AirPort TC, too. Suddenly, connection failed. ISP brought new modem. To connect, I turn on the whole wo