Sound Input not available with AJA IO

Hi everyone,
I have a problem with recording sound, using the voice over tool with my AJA IO.
Whenever I try to select ProIO In as source for my, it says "The selected audio source is not available. Maybe it's used by another program, not or wrong connected or there's a conflict with the video output device" (that's not the exact original therms, I translated from German).
I'm using the AJA IO to output video/audio to the sound booth via AES/EBU and Composite. I re-installed the AJA drivers and have no problems to record via SDI.
Maybe it's not possible to output audio/video and simultaneously record audio with the AJA IO?
Thanks in advance for your help!
Best regards,
Martin

Too bad, I really hoped and expected, that this is possible. Unfortunately when I try to use my second sound interface (M-Audio FastTrack Pro), the whole system crashes. So I have to use the built-in line in, what is a shame.
Anyway: Thanks for the info, Jerry!

Similar Messages

The sound is not available

I was using Oxford online dictionary ( http://www.oxfordlearnersdictionaries.com/us/definition/english/happy ). When I clicked the prunuciation button, a message popped up saying "Apologies, the sound is not available."
Here is a screenshot.
https://i.imgur.com/UGSlqkm.png
I have tested this on another broswer (chromium) and did not have this problem.
How do I get it to play?

Doesn't work for me either on Linux with Firefox 32.
It works in Firefox 31
The Web Console (Firefox/Tools > Web Developer) shows this error.
<blockquote>
Invalid URI. Load of media resource failed. happy
</blockquote>
The MP3 seem to be crashing Firefox as I can't close and restart Firefox and need to kill the process.

...notifications are a paid only feature, they are not available with a free account...

Hi Support-Team,
is there a chance to change this:
"... notifications are a paid only feature, they are not available with a free account ..."
If we can't send a notification to an other user FormsCentral doesn't make sence and will cancel the account... That would be a pity, because otherwise everything would work very well.
Kind regards
Andreas

Hi;
Thanks for your feedback, but notifications are a paid feature and are not available in a free account. That isn't likely to change. Hopefully there is enough value in this and the other features of a paid account for you to consider an upgrade.
Thanks,
Josh

D7360 automatic duplex printing is not available with latest driver

d7360 automatic duplex printing is not available with latest driver
This question was solved.
View Solution.

Hello ephsh,
Welcome to the HP Forums.
I see that you are having an issue attempting to do some duplex printing.
So I can better assist you, please respond with which Operating System you are running:
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
I am going to attach a document that deals with a Two-Sided Print Option Is Not Available Even Though an Automatic Two-Sided Printing Accessory (Duple....
Please feel free to write me back at your convenience.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

Work Clearance Management (WCM) not available with ECC 6.0

Hi All,
Work Clearance Management (WCM) is a part of SAP Plant Maintenance (PM). It is a standard functionality. This is not available with our installed version of ECC 6.0 system.
The navigation should be
SAP Easy Access > Logistics > Plant Maintenance > Work Clearance Management.
This is also not available on SPRO.
But whenever we directly enter the T Code related to WCM, it allows me to go to that screen. But if we want to customize the WCM using the same method then the SAP standard configuration is missing.
I need to get this functionality available on our system.
Is it a part of SAP software component SAP_APPL ?
But how do I get this ?
Can anyone pls help me on this ?
Thanks and warm regards
Purnendu

I think that WCM it's present as an extension set (i'm not quite sure if is EA-PLM or EA-SCM). When you configure it, the activities related in custominizg, will appear as well.
Hope this help
Ezequiel

My sound is not working with the computer speakers and with headphones, help?!

my sound is not working with my headphones or the the computer speakers

You indicate you have a "brand new Air", you have a 14 day exchange, and the warranty of which you paid for regarding genius bar in-shop diagnostics (and repair if necessary)
What year model Air do you have?
On the first question,....are the headphones attached when you have your Air in sleep?
If yes, then refrain from having phones attached when you close the monitor to prevent this until it is resolved
resolution as to same yet, no.

Allignment tool not available with the Student Version?

Is the Allignment tool not available with the Student Version? It appears to be clickable yet no action… Is there a preference I'm missing?

Shawn,
Educational is a full version.
You need to select (at least) two objects, then apply the deired Align operation(s).
If something is really wrong, you may have a look at the list below.
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html

HT5622 Why do I get this massage undated is not available with this Apple ID

Why do I get this massage update is not available with this Apple ID.

There are dozens of posts with this same issue. Search before posting.
It's an Apple issue;
http://www.macrumors.com/2014/05/08/apple-id-ios-app-updates/

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?

Burned iMovie .mov to DVD and it caused movie to skip/have weird transitions between scenes and sound to not match with picture. What can I do to help fix this when reburning?
Movie details
QuickTime Movie
Size: 17.95 GB
Duration 17:39
2 audio channels
Codecs- Linear PCM, Apple ProRes 422, Timecode
Thanks!!

You can't use iMovie to create a video DVD - for that you need iDVD:
Why is there no iDVD on my new Mac? How do I get it and how do I install it?
https://discussions.apple.com/docs/DOC-3673
To burn a DVD with iDVD from the latest version of iMovie, you have to export the movie using the Export button and select 480p as the size. Open iDVD and start a new project, then drag that exported movie file into the iDVD menu window, avoiding any drop zones you see.

HI, I JUST GOT IPHONE 5S AND WOULD LIKE TO DEFINE NO OF MAIL IN MAIL BOX, BUT THIS FEATURE NOT AVAILABLE WITH 5S, HOW TO DEFINE IT. AS NOW ITS SYNC ALL MAIL IN MY INBOX, I WOULD LIKE TO DEFINE NO FOR SAME. PL HELP ME.

HI, I JUST GOT IPHONE 5S AND WOULD LIKE TO DEFINE NO OF MAIL IN MAIL BOX, BUT THIS FEATURE NOT AVAILABLE WITH 5S, HOW TO DEFINE IT. AS NOW ITS SYNC ALL MAIL IN MY INBOX, I WOULD LIKE TO DEFINE NO FOR SAME. PL HELP ME.
MANU

Your question doesn't make much sense in English. To have no mail in your in box, you need to delete what you have.

Why when I play a video on my HP G2-34OUs Notebook the sound does not go with the video?

When I play a video from a CD, the sound does not go with the pictures/film. Sometimes the video just stops and will not move forward. This happens on a number of players that I have enstalled.

Hi henryjd,
Sorry to hear about the videos issues, I know that can be frustrating. I will be happy to help. It sounds like you are having an issue with either your video and/or audio drivers. What version of operating system are you running?
http://windows.microsoft.com/en-CA/windows/which-operating-system
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Satellite A300 - Series Stereo Mix not available with Conexant sound driver

Hi . . .
I have Toshiba Satellite A300 PSAJ0E notebook . . .
I was useing Windows XP Professional . . .
But I am not able to use Stereo Mix the peculiarity . . .
I installed Conexant HD SmartAudio 221 Driver . . .
What can I do in this subject . . .
I thank right now . . .
Best Regards . . .

Unfortunately, but you cannot do much
The point is that this is a Conexant sound driver issue. This options or setting is simply not available in Conexant sound driver and therefore the Stereo Mix port is not available and cannot be used.
I think only an sound driver update can helps so lets wait for a update.
Cheers mate

Logic Pro 9 - MOTU MK II inputs not available in channel strip

I usually use a MOTU 24 i/o as my main Logic Pro 9.1.5 audio interface. I'm trying to use a MOTU MK II and it is connected via firewire. It shows up fine in the Logic > Audio > core audio driver preference and is checked on. However the MKII in/outs are not available on Logic's channel strip inputs and outputs. Logic still shows the 24 i/o's even though the 24 i/o is not selected in audio preferences and is not even turned on.
I've reinstalled the latest MOTU drivers, trashed Logic's preferences and restarted my MacPro but it is still the same. Only the 24 i/o available in the channel strip input and output.
Is there a second audio i/o setting that I'm missing?
My Mic is registering OK in the MKII so I know it is getting a signal.
Thanks,
Richard

For some reason Logic is listing the 24 i/o inputs.
I've renamed the 828 Mk2 1 & 2 inputs to Vox 1 and Vox 2. The MK2 has 8 analog inputs plus two mic/line inputs for a total of ten audio inputs, not 14 as listed in the channel strip input drop down.
Audio registers in and out of the Mk2 but does not register in Logic's channel strip input. I just switched back to the 24 i/o to test and audio registers fine in Logic's channel strip input with the 24 i/o. Just not with the MK2 selected as the audio source.
I'm curious if anyone else has had this problem or if I'm missing an audio input setting somewhere.
Thanks,
Richard

Novell login not available with remote desktop on windows 7

Installed Novell Client 2 SP3 for Windows Server 2012 on my terminal server. When I log in from Windows XP to that terminal server I am getting an option to login with Novell Client. On Windows 7 however I only can logon to the server. What am I missing here?

djaquays <[email protected]> wrote:
> Mostly, that MS RDP for Mac ignores the authentication level:i:0 option
> in an RDP file and there's no GUI equivalent to force legacy
> authentication.
Microsoft's Network Level Authentication (NLA) feature is supported in
Windows Server 2008 and later terminal servers, and supported by
Remote Desktop Connection (MSTSC) 6.x and later terminal clients.
Windows XP did not ship with a MSTSC 6.x terminal client, but it is
available optionally through Windows Update.
The NLA authentication is essentially requiring that valid Windows
user account credentials for the Windows Server machine must be
provided /before/ the RDP-level terminal session connection is even
attempted or permitted. If the Windows user credentials you're logged
in with on the client workstation do not already satisfy this
requirement, the NLA-aware MSTSC clients will prompt you for valid NLA
credentials before even attempting to open the terminal session.
In other words, NLA doesn't directly have anything to do with whom you
will become authenticated as within the terminal session, or whether
you'll reconnect to some other already-running terminal session; it's
a new default mechanism which requires Windows credentials for
authorizing you to create an RDP connection to the Windows Server
machine "at all."
Unfortunately Windows Server 2008 and later don't permit you to turn
NLA completely off. You can configure the Windows Server to always
require NLA, which means pre-MSTSC 6.x terminal clients will be unable
to connect. Or you can configure the Windows Server to "not require
NLA" ("Allow connections from computers running any version or Remote
Desktop"), but this still means Windows Server will use NLA if the
workstation's MSTSC client supports NLA.
The only option which has been available to "disable NLA" even when a
Windows Server 2008 or later terminal server and a MSTSC 6.x or later
terminal client are involved is to configure the
"enablecredsspsupport:i:0" setting in the MSTSC client's .RDP file
(e.g. default.rdp in the My Documents folder), in addition to
configuring the terminal server to "not require NLA."
Once you have "Allow connections from computers running any version or
Remote Desktop" set on the Windows Server, and
"enablecredsspsupport:i:0" set in the MSTSC client, now you're back to
the Windows XP & Windows Server 2003 behavior where an RDP terminal
connection can be established without first having to supply NLA
credentials, and the first thing the MSTSC client user will experience
is the full normal credential provider-based login experience just
like you see at the physical console of the terminal server.
Note that if you do leave NLA enabled and supply NLA credentials
during the MSTSC connection attempt, after successfully using those
credentials to authorize creation of the RDP connection, the MSTSC
client will /also/ default to using the NLA credentials as default
credentials to attempt logging on with within the terminal session
itself. In other words, if you successfully supply NLA credentials,
by default you also become logged in on the terminal session and go
straight to the desktop of the Windows user account specified in the
NLA credentials. So even though "NLA credentials" and "whom I will
logon as within the terminal session" are two separate things, by
default the MSTSC client tries to use the same credentials for both.
But it's not that the NLA credentials "must" be used for logging in on
the terminal session; that's simply the default behavior. If you
leave NLA enabled on the Server 2008 or later terminal server, after
NLA credentials are successfully used to authorize creation of an RDP
connection, if you wanted to instead be prompted within the terminal
session with the normal credential provider login experience, enable
the "Always prompt for password" on the Windows Server 2008 or later
terminal server.
(On the Server 2008 or later machine, under "Administrative Tools"
find the "Remote Desktop Services" group and launch the "Remote
Desktop Session Host Configuration" console. Highlight/select the
"RDP-Tcp" connection, right-click and select "Properties". On the "Log
On Settings" tab elect "Always prompt for password".)
That sounds like probably the scenario which fits best for the "I have
a Macintosh-based client which doesn't allow enablecredsspsupport:i:0
/ authentication level:i:0." You would leave NLA enabled on the
Server 2012 machine, but enable "Always prompt for password" in the
RPC-Tcp connection properties on the Server 2012 machine. Such that
after NLA authentication was performed and Windows allowed creation of
the terminal session, instead of immediately also attempting to login
within the terminal session as the Windows account specified in the
NLA credentials, Windows will instead present the normal interactive
credential provider login experience to allow the user to specify whom
they want to login as.
Finally, note that everything described above applies even to a
Windows Server and Windows client workstation that do /not/ have the
Novell Client for Windows installed. The same mechanisms remain in
effect even once the Novell Client is installed; the presence of the
Novell Client just changes what credential providers would be used or
presented within the terminal session once the terminal session was
allowed to be created. The fact that NLA is required by default and
requires valid Windows credentials in order to authorize an RDP
connection is still the same, regardless of whether the Novell Client
is present or not.
Alan Adams
Novell Client CPR Group
[email protected]
Novell
Making IT Work As One
www.novell.com
Upgrade to OES Community
http://www.novell.com/communities/co.../upgradetooes/

IPhoto & iMovie update not available with this Apple ID

Hi everyone - I'm at a loss as to how to fix this issue...
I'm trying to update iPhoto and iMovie from the Mac App Store but I get the following error message:
Update unavailable with this Apple ID: This update is not available for this Apple ID either because it was bought by a different user or the item was refunded or cancelled.
I've read the other threads about the apps being 'linked' to previous Apple IDs so I logged out and back in with an older / previous Apple ID that I had used before but it still wouldn't allow the update to the two apps - in fact the App Store said that the older ID hadn't even been used in the App Store.
I updated my OS to Yosemite yesterday so I don't know if that's affected anything?
Really hope someone can help - it's starting to frustrate me!
Cheers
Neil

Please test after each of the following steps that you haven't already tried. Stop when the problem is resolved. Back up all data before making any changes. Keep in mind that no one here represents Apple or can help with customer-service issues.
Step 1
A purchased app can only be updated by signing in to the App Store with the same Apple ID that was originally used to buy it. There's no way around that limitation, which also applies to free apps. If you can't sign in with the buyer's ID, delete the app and reinstall it. You'll have to pay for it again, if applicable.
Step 2
If you get the alert when trying to update a bundled iLife app, select the Purchases page in the App Store and locate the app in your purchase history. If there's a button marked ACCEPT on the right, click it.
If you have a used Mac, the bundled apps were linked to the original owner's Apple ID and can't be transferred to you. Reportedly, customer service has issued redemption codes to some second owners who asked, but it's not guaranteed.
Step 3
If you're trying to update iLife or iWork apps that were installed from a purchased DVD, or if you have a refurbished Mac bought directly from Apple, contact App Store customer service for a redemption code. You may be asked for the part number of the DVD.
Step 4
From the App Store menu bar, select
Store ▹ View My Account
Enter your Apple ID password at the prompt. At the lower right corner of the window that opens, click the Reset button. Close the window.

Sound Input not available with AJA IO

Similar Messages

Maybe you are looking for