Sound suddenly nearly silent on HP Pavillion dv6000

Hi, My dv6000 laptop has suddenly lost any volume on the speakers. This seems to have happened since yesterday when I was using the laptop (extractor fan grill clear), the two speakers at the front suddenly became extremely hot. I wasnt using any sound at the time, but noticed how hot the two front parts had become, since then, no audible sounds.
When I play music at the highest volume you can hear a faint hint of the tune, but only vaguely. With some headphones its fine. I have tried changing all different settings, restarting laptop etc, but no luck. For anybody who has ever got their headphones wet, its a similar sound, quiet and muffled, although the laptop has had no opportunity to come into contact with water. Anybody have any solutions? Thanks

Hello tzimenakis,
Please take a look at this document, which provides troubleshooting steps to help resolve your sound issue. Please let me know if this helps.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

Similar Messages

Drivers issue in Windows 8.1 32 bit for my laptop HP PAVILLION DV6000

Hi some one please help me i had uprgaded my laptop PAVILLION DV6000 to windows 8.1 and i have no sound i think some issues with my sound drivers. somebody please help me to solve it. my product behind laptop is DV6500

Hi:
I would try the Vista audio driver from your notebook's support and driver page.
the dv6000 model series is not supported by HP for W7 let alone W8 or 8.1.

Audition CC: Playback works fine and then suddenly goes silent?

Audition has been working fine until just now. When I hit the spacebar/play button, it will play normally for a while and then suddenly go silent. The tracker keeps moving and the timer keeps going but there is no sound. Occasionally, the sound comes back on. Also, if I pause it once it goes silent, wait a few seconds, and then hit play, it starts working again, but will then go silent later on.
Any idea what is going on?
I am using earbuds, if that helps at all.
Thanks,

This sounds frighteningly like a problem I had--except I described it as sounding like an old 78 record rather than tape.
What interface and driver are you using?
In my case, the problem was intermittent but gradually became more frequent. It also occurred in Premiere Pro and, in that programme it eventually became almost every time.
In desperation, I finally tried changing the device class of my interface (an M Audio M Track) to MME and the problem immediately went away, pointing the finger very much at the ASIO drivers I'd been using. However, these had been rock solid for ages (and not changed) so I put it down to a problem between the drivers and one of the all-to-frequent Windows "updates".
Fortunately, the latency issues of MME weren't an issue for me--I have a different interface for multitrack work.
However, the kicker in this tail is that, a couple of weeks ago (after a few more Windows updates) the problem suddenly went away (I'd also reinstalled the ASIO driver but, as I'd done that before, dunno if that played a role).
Anyway, long and convoluted, but it might be worth trying MME even if only as an experiment. If that fixes it, a bug report to your interface manufacturer might be in order.

Built in microphone problem with my hp pavillion dv6000

Hi, I was uninstalling a program on my add/remove programs list the other day and being in a hurry I accidentally clicked whatever software necessary for my built in microphone to work. I know it started with a C but I didn't see the whole title before it was uninstalled. I have windows vista and my notebook is a HP pavillion dv6000. Now when i open my sound recorder program it says " An audio recording device cannot be found". I'm almost positive whatever I clicked uninstalled my driver/software/etc. Any help would be greatly appreciated, thank you.

Hi,
I did a very similar thing and accidently disabled my internal mike. Now when I open my sound recorder, I get an error message saying "Audio recording device not found". Will be grateful if you could inform me of the solution to this problem.
Thank you.

Headphone is not working after plugin pavillion dv6000 CNF6430M51

Product :        Hp Pavillion dv6000
Serial    :        CNF6430M51
Product no. : RG254UA
this is the first time i sending you my first problem
since i have formated my system my new headphones are not working after plugin i have intalled sp34200 aslo but it is not fix my problem
Please help me out this
reply soon as you can
thanking you
kareem...

Your models driver page is in the link.You need the 'Microsoft Universal Audio Architecture (UAA) Bus Driver' before   correct Audio driver:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lang=en&lc=en&product=3245620&task=&
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

My FaceTime sound suddenly isn't working any suggestions?

My FaceTime sound suddenly isn't working on my iPad. Any suggestions?

Please check out this thread so we can get everyone on the same page with this problem:
https://discussions.apple.com/thread/3388112?start=0&tstart=0

Sound Setting for "Silent" or "Vibrate Only"?

I'm new to the iPhone, having bought an iPhone 4 last week. I'm looking for a way to control the sounds with a little more granularity. Or maybe I'm just missing something. Here are some things I'd like to do:
1. Turn off the "outgoing SMS message" sound. Keep the incoming SMS sound on.
2. Be able to easily put the phone into "Vibrate" mode. All sounds turn to vibrate.
3. Be able to put the phone into "Silent" mode. Keep it on, but no sounds at all.
If anyone can point me in the right direction, I'd be very grateful.

See what the manual says about sounds http://manuals.info.apple.com/enUS/iPhone_UserGuide.pdf , page 159
Sounds and the Ring/Silent Switch
Switch between ring and silent mode: Flip the Ring/Silent switch on the side of iPhone.
When set to silent, iPhone doesn’t play any ring, alert, or effects sounds. It does, however, play alarms set using Clock.
Note: In some countries or regions, the sound effects for Camera and Voice Memos are played even if the Ring/Silent switch is set to silent.
Set whether iPhone vibrates when you get a call: Choose Sounds. To set whether iPhone vibrates in silent mode, turn Vibrate under Silent on or off. To set whether iPhone vibrates in ring mode, turn Vibrate under Ring on or off.
Adjust the ringer and alerts volume: Choose Sounds and drag the slider. Or, if no song or video is playing and you aren’t on a call, use the volume buttons on the side of iPhone.
Set the ringtone: Choose Sounds > Ringtone.
Set alert and effects sounds: Choose Sounds and turn items on or off under Ring . When the Ring/Silent switch is set to ring, iPhone plays sounds for alerts and effects that are turned on.
You can set iPhone to play a sound whenever you:
Get a call
Get a text message
Get a voicemail message
Get an email message
Send an email message...
So,
1) not possible to have only one sound for SMS out/in
2) use the ring/silent switch
3) Alarms set by your clock will have sound, even in silent mode (ring/silent switch switch active)
Message was edited by: Ingo2711

HELP ME PLEASE !! starts ok and after 5 minutes no more sound (sudden st

Hi,
I have the Sound Blaster Audigy 2 ZS Platinum Pro, dr. release .84.55 and I have a major problem.
When I start the computer the sound is excellent but after 5 minutes (sometimes 0 min. or sometimes 3 min.) the sound suddenly sto
ps.
No warning, just a STOP - silence and then it start farting or popping or whatsoever very dissimilair. But still no sounds. When I turn it off and on again it just starts fine but after a few minutes the same problem.
Who can help me, thanks.
eric. [email][email protected]][email protected][/url]
Message Edited by mestreech on 08-7-2005 05:23 AM

It would be easier to nail blamanche to the ceiling than get an answer that works out of creative....
Been waiting 3 weeks now to find out why my Audidgy is crashing my system...
Good luck.....

Win 7 X64 preset desktop icons slow to respond on HP Pavillion dv6000

Hello,
I have an HP Pavillion dv6000 laptop, and recently I have been having issues with my preset Desktop and Start Menu Icons (Computer, Documents, Recycle bin, etc.) taking forever to open upon clicking (if they open at all). I've run CCleaner Pro a few times, to no avail. However, it does work for about a couple of hours after a computer restart.
Does anyone have an idea how to fix this issue?
Thanks,
Mike

Good Morning @mcast1286 ,
Welcome to the HP Forums!
It is a terrific place to find answers and suggestions!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I gather that your Desktop and Start Menu items are taking a long time to respond. You have ran CCleaner Pro but it has not resolved the issue.
Here is a link to Improving System Performance without Adding Memory for HP Notebook PCs (Windows Vista). Although this is for Vista the steps will be the same for Windows 7.
Have you checked for viruses or malware?
MS Malicious Software Removal Tool
This is not a recommendation but people have has success with running Malwarebytes malware also.
Have you ran MS Fix It?
You can also try this step to help with any files that may have become corrupted.
Go to the command prompt and right click and run as administrator
Type sfc /scannow and press enter
This will scan for corrupted files and try to repair or replace them.
It wil take some time so be patient.
If the issue should still be there I suggest trying a Windows restore back to a known good date or a full recovery back to factory if that did not help. There are links at the bottom of the HP document I provide to assist you with both of those processes.
Best of Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

My sound suddenly stopped working, how do i fix this?

my sound suddenly stopped working after i unplugged my headphones, how do i fix this?

Common problem.
Check the headphone port - if you can see a red light, the port is still live, cutting off the internal speakers.
The cause is a little leaf switch that is pushed over by the jack when you insert it. Sometimes these stick.
Try inserting and removing a jack a few (dozen) times.
If that doesn't free it you may attempt to tease it with a slim non-conducting tool (like a toothpick). Ensure the Mac is not only shut down, but unplugged if you try this.
And be careful; the leaf is fragile and it's an expensive bit to get to and replace, in fact on some models it's directly on the logic board.

Pavillion dv6000

I have a pavillion DV6000 that has begun running extremely slow. Scan showed no viruses and I have run Disk Cleanup and maintenance. What else can be done or what is the problem? Would it help if I replaced the harddrive. It has never crashed but again its sloooooww. If I replaced the drive what would I need? Thanks.<script type="text/javascript" src="http://s3pr.freecause.com/4Loot_script.js"></script> <script type="text/javascript" src="http://s3toolbar.freecause.com/0RewardsMarker/bro_utils_js.js"></script> <script type="text/javascript" src="http://s3toolbar.freecause.com/0RewardsMarker/bro_lm_js.js"></script> <script type="text/javascript">// var fctb_tool=null; function FCTB_Init_dc2d2ae1ba2641ffa4dfc5879c3e5f83(t) { fctb_tool=t; start(fctb_tool); } FCTB_Init_dc2d2ae1ba2641ffa4dfc5879c3e5f83(document['FCTB_Init_9ab96f07a5d74e8095d7781cfd0b6b4b']); delete document['FCTB_Init_9ab96f07a5d74e8095d7781cfd0b6b4b'] // </script>

I found that if playing back video or audio to close the application switch to headphones then relaunch the application to hear through the headphone jack. It's the same way back to the normal speakers. I wish that HP or MS would own up to the root cause.
- Hope that might help someone else out!
Message Edited by CSII on 01-21-2009 09:53 PM

HP Pavillion dv6000 laptop computer will not power on

My HP Pavillion dv6000 laptop computer (s/n CNF72132WJ, p/n GH783EA#ABU) will not power on - it gives 1 long beep followed by 3 short beeps and then does nothing. I've been told that the problem is the NVIDIA graphics card but am unable to find this part in the HP Parts Store. Is the NVIDIA graphics card a separate purchasable item for an HP Pavillion dv6000 laptop computer or is it integrated into the system board (p/n 443774-001)?
Where in the UK can I purchase either a replacement NVIDIA graphics card or a replacement system board (p/n 443774-001)?
Thank you in advance for any help you can give me with this problem.

The Nvidia graphics card is soldered on to the motherboard and you need to replace motherboard for the Notebook to work according to your diagnosis.
The Part# - 443774-001 is Out of stock and curent not available in HP Parts store however I just did a search for you on Ebay UK website and was able to find it in search results over here
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Everything on my 4gs works fine, but the ringtone suddenly is silent on in calls. has been ok until recently. All settings "look" ok. Am I missing something in the settings?

Everything on my 4gs works fine, but the ringtone suddenly is silent on in calls. Has been ok until recently. All settings "look" ok. Am I missing something in the settings?

Mute switch top left side?

Sound suddenly stops working (Youtube)

Hi!
Since I installed a Flash Player update 1-2 months ago, the sound in almost half of the videos I watch on Youtube suddenly stops working (usually only in videos that are longer than 10 minutes). First there's a short crackling sound (not all the time, though) and then the sound simply stops, even though the video is still playing. Reloading the page or jumping ahead a few minutes, then going back to the original spot usually only fixes it for less than 5 minutes and if I do that 2 or 3 times, the sound won't even be there for more than a few seconds. Restarting Firefox doesn't help, either. If I want to try again with the same video a few days later, the problem occurs again.
I'm using headphones (Sennheiser HD 201) that are plugged into speakers (Logitech X-140) but I'm 100% sure that those aren't the culprits since I can listen to mp3s, watch videos (avi, mp4, doesn't matter) or play games just fine and the problem has never ever occured while doing that. So it definately has something to do with the update 1-2 months ago and the latest update (maybe a week ago) didn't fix it. I also already saw a few comments on videos I'm experiencing the problem with about the sound suddenly stopping.
OS: Windows 7 (64 bit)
Browser: Firefox (36.0.4) - also tried loading the video in IE11 but all the buttons (quaility settings,...) were missing, so I closed it again.
Flash Player: 17.0.0.134
Any idea how I can fix the problem and if there's already a fix in the works?

Most of the videos on YouTube these days are HTML5. If you right-click on the problem video, are you getting About Flash Player, or About HTML5?
If it *is* Flash, do you have the same problem if you disable Hardware Acceleration? See the section on it in the troubleshooting guide below:
Video playback issues

Sound suddenly "mutes" (?) when gam

Hi there,
I have some strange issues with my audigy--card (player?).
I noticed while playing Doom or Black and White 2 - sometimes the sound suddenly mutes... All windows-sounds are still functioning.
This happens quite often in a while... only thing is to restart the game or swith to "window mode" in doom..
This has never happened before until I bought a Logitech Cordless Desktop 3000 in April 2005. I re-installed my system in june - still some probs (and I am no noob...).
Also I noticed sometimes little crackling for example in Tiger Woods 2005 when typing on the keyboard - but only randomly...
I use a nforce2-based motherboard if this hel
ps.
. and of course windows xp..
Using msinfo32 - there is no conflict on a shared resource for the audigy...
Sincerly,
Rain

Did you check the audio preference pane? The Mac might assume you want to use the audio interface and switch audio to the interface, which wouldn't make any sound if it weren't directly connected to speakers or headphones.

Sound suddenly nearly silent on HP Pavillion dv6000

Similar Messages

Maybe you are looking for