Space bar scratched x61 screen

not sure if this is a common issue or just my x61 is not properlly assembled.    both ends of my space bar are higher than the rest of the keyboard, and over time they left two white spots on the screen (LCD top layer scratched off), which are quite visible sometimes.
my X61 is two years old, can i get any LCD replacement for this?   thanks guys.. 

you could call Lenovo and find out. But i don't think you will get it fixed under warranty in China. 
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Similar Messages

  • FULL SCREEN PREVIEW WITH SPACE-BAR INTERMITTANT/BUGGY.Ref. Bridge CS6/5.0.2.4:

    Ref. Bridge CS6/5.0.2.4:
    Win-7-64
    I've been using the Space-bar for Full Screen Preview for years, & thousands of times with no problems whatsoever.
    Suddenly it's become intermittent, sometimes it works "normally", other times I have to tap the Space Bar several times---The image "jitters" on the screen, & eventually works---sometimes takes "a few" taps, sometimes a half dozen or more.
    Purging Cache didn't help, nor did replacing the Keyboard with another one.
    I don't recall if the CS6 disk has a Bridge "Repair" function.
    Regards,
    Leigh

    I deleted Preferences---Seems to be working now.
    Leigh

  • Blank space above address bar in full screen mode on Mac

    Hi.
    Blank space appears above address bar in full screen mode when I bookmark specific web page for the first time after FF start. Only way to hide this space is View->Toolbars->Customize->Done. But it appears each time after FF restarts. Disabling all addons does not help. This problem disappears only in FF safe mode.
    Thanks,
    Roman

    Hi romansobko, try to [https://support.mozilla.org/en-US/kb/advanced-settings-browsing-network-updates-encryption#w_browsing disable hardware acceleration] and check it again(in safe mode hardware acceleration is disable).
    see for more info : https://hacks.mozilla.org/2010/09/hardware-acceleration/
    thank you

  • Help! My space bar isnt activating the hand tool to grab the screen!

    CS 5.5. Just restarted Photoshop and still the same problem. I should be able to hold down the space bar and grab the screen to drag it around. Not working anymore. Thoughts?
    OS X
    CS 5.5

    You may need to reset your Photoshop prefs.
    Try this:
    http://forums.adobe.com/message/4209421

  • How do I get my macbook to stop scrolling up and down screens, mainly in safari, when hitting the space bar?

    every time I hit the space bar while in safari, my page scrolls down and then back up.  and when I hit the backspace/delete key, it takes me back to the previous page.  I need this to stop.  I cannot get anything done with this going on.

    every time I hit the space bar while in safari, my page scrolls down and then back up.  and when I hit the backspace/delete key, it takes me back to the previous page.  I need this to stop.  I cannot get anything done with this going on.

  • X220 keyboard - space bar is loud

    The space bar on the keyboard of my new x220 is rather loud, much louder than the space bar on my x61s or x31.  It's quite audible when I push it and louder on release.  Also, the left Alt key is louder than the right Alt key.
    I reseated the keyboard it seems fine.  The two bottom screws go in easily and tightly.
    I'm hesitant to send it in for warranty service, given the stories I've heard about repair and I'd rather not be without the computer.
    Any suggestions?

    Ask for a replacement keyboard of a different part number? Might work.
    W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
    X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
    Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

  • Upgraded to snow leopard, now safari scrolls a page down when space bar is hit and sometimes crashes.  Any ideas for a fix?

    I just upgraded to the new snow leopard, now my Safari is acting loopy.  At times, the page will scroll down when I hit the space bar.  As I type this discussion the screen isn't paging down, but if I go to the tab where I have facebook loaded and hit the space bar, it acts as a page down key.  I've had safari crash about 5 times tonight for no apparent reason.  The delete key sometimes will act as a page back key.  I really have no idea whats going on. 
    I've had keyboards go wacko on me before due to something being spilled on them or a wireless problem, but this keyboard is a wired keyboard and nothing was spilled on it.  It's rather new and I'm quite certain it's not a keyboard issue. 
    No settings have been changed on the computer.  The only thing different today from yesterday, is the fact that I upgraded to snow leopard.
    Help would be pretty sweet.   
    Thanks,
    Jason

    I just upgraded to the new snow leopard, now my Safari is acting loopy.  At times, the page will scroll down when I hit the space bar.  As I type this discussion the screen isn't paging down, but if I go to the tab where I have facebook loaded and hit the space bar, it acts as a page down key.  I've had safari crash about 5 times tonight for no apparent reason.  The delete key sometimes will act as a page back key.  I really have no idea whats going on. 
    I've had keyboards go wacko on me before due to something being spilled on them or a wireless problem, but this keyboard is a wired keyboard and nothing was spilled on it.  It's rather new and I'm quite certain it's not a keyboard issue. 
    No settings have been changed on the computer.  The only thing different today from yesterday, is the fact that I upgraded to snow leopard.
    Help would be pretty sweet.   
    Thanks,
    Jason

  • I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function works

    I can edit on Premiere Pro 6 files, but after a dozen keystrokes, the space bar and cursor keys stop working while the save function, render workspace function, export file are still operational. How can I fix it so I may complete my assignment?
    Besides DaVinci Resolve, Adobe Creative Suite 6 is the only software on the machine. I am using Windows 7 Professional 64-bit Operating System on AMD FX 6100 six-Core Processor at 3.31gHz and 32 GB RAM memory. There are two SLI-bridged GTX680 NVidia cards.
    The software was very stable for the last six months, working with 720P proxy files from 2.5K masters (Blackmagic Design Camera). I am working on a feature-length project that exceeds 1000 edits. I have broken the file into 2 one hour segments.
    I have deactivated the software before reinstalling the entire OS from scratch. PP6 was very stable for 48 hours. Then the freezing space bar returns. After a dozen strokes into the project, same problem.  I have made cache files store next to originals, I have deleted preview files if they were corrupted and causing instability. Am I missing something?
    I have Microsoft Security Essentials for virus protection. I double checked the memory for damage/defect. Nothing says that the motherboard or other components are damaged.
    I am in film competition overseas and need to have deliverables in less than a month's time.  I lost the last two weeks troubleshooting and this crisis came at an inopportune moment of the project.
    Any assistance would be greatly appreciated.

    Still getting software freezes but found a way to mitigate for the mean time.
    Upon launching Adobe Premiere Pro, hit CTRL-ALT-DEL to launch TaskManager as well.
    You will want to highlight Adobe QT32 Server.exe
    Right click and select "End Process Tree"
    You will get considerable stability in the program, long enough to get timing of cuts done. Be sure to save often.
    If the program freezes, do not hit Save. You definitely want to avoid saving the corruption into your TimeLine
    CTRL-ALT-DEL to relaunch the TaskManager and highlight Adobe Premiere Pro.exe
    Right-click to "End Process"
    No need to reboot the whole system; just launch Premiere Pro again and continue with the session. Note that your work reverted to Last Save.
    Hope this helps until the bug is fixed.

  • I have been able to wake my macmini by hitting the space bar - but since installing 10.7.4 using the 1.4Gb combo this wake method no longer works. Now the macmini shuts down, and I have to switch mains power off and on again before powering up the macmini

    Since purchase of my macmini (2011 model) I have been able to wake it from sleep by hitting the (wired) keyboard space bar.
    However, I recently updated the OS to 10.7.4 using the combo (1.4Gb) update, since when I cannot wake the macmini in that way.
    Now, after putting the macmini to sleep, pressing the spacebar causes it to shut down.
    I then have to switch mains power off and on again at the wall socket, after which the macmini starts up from shutdown condition.
    I am by no means an expert, and have not been fiddling with settings, so I am in need of advice on what could need resetting to allow me to return to the previous simple 'wake up' approach!
    Thanks.

    Reset the SMC > Intel-based Macs: Resetting the System Management Controller (SMC)
    1. Shut down the computer.
    2. Unplug the computer's power cord.
    3. Wait fifteen seconds.
    4. Attach the computer's power cord.
    5. Wait five seconds, then press the power button to turn on the computer.
    Followed by resetting the PRAM > Resetting your Mac's PRAM and NVRAM
    1. Shut down the computer.
    2. Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    3. Turn on the computer.
    4. Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    5. Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    6. Release the keys.
    Then if those do not fix the problem, you may need to reset your Energy Saver and Keyboard Preferences by readjusting them.

  • How can I make the space bar repeat rapidly?

    How can I make the space bar repeat rapidly?

    When Safari is in FullScreen mode, menu bar will be hidden.
    Safari window to fit the screen?
    Move the mouse pointer to the bottom right corner of the Safari window.
    Double arrows will appear. Drag it to resize the window to fit the screen.

  • Space Bar Hand Move & CMD-Space Zoom Not Working-CS5

    Today, all of a sudden, two of my most used functions—holding down the space bar to move the image around and holding down CMD-space bar to zoom—just up and quit on me (I do like the "Scrubby" but it took a little getting used to. It's very touch screen-esque).
    I did all of the normal trouble shooting such as deleting the prefs, relaunching, restarting, etc. Nothing. The functions work fine in the other CS5 programs.
    Anybody else come across this? I checked through all of the prefs thinking that perhaps I accidentally changed something but I couldn't find anything. If all else fails, I'll do an uninstall/reinstall but only as a last resort.
    I did notice that Adobe finally fixed the Distort (in Full Screen Mode) bug that was killing me in CS4.
    Thanks for any help.

    I don't believe it but I think that I finally found the culprit: hulu (the desktop app, not through a browser).
    To make sure, I rebooted, launched PS, Flash, and InDesign, and then fired up every app that I could think of, one by one, testing each time, leaving hulu for last. Sure enough, it was not until I got to hulu that the space bar hand/zpom stopped working. And then I went one by one, quitting each app, testing each time, again leaving hulu till the last. Sure enough again, the space bar continued not working until I quit hulu, the very last app that I had running (aside from CS5 and system processes).
    Please, please do not tell me that there is a conflict between CS5 and hulu's utilization of Flash! That would just make Mad Dog Jobs' a happy camper. (I am a big supporter of Flash on the iPad).
    What a relief. Except how am I now going to watch my TV shows while working???
    In regards to browser conflicts, I have had none with Safari, Firefox, or Chrome.
    Adobe, I hope that this information helps. Let me know if you need any info screen capped.

  • Netflix and Youtube will not play on Firefox but I can still hear sound and can pause with the space bar. Works fine on Internet Explorer.

    All of a sudden last night after Firefox restarted after an update I am no longer able to play Netflix or Youtube. I can hear the sounds from whatever I select to play but the browser is black and I can even pause using the space bar but no interaction with the cursor. Both Netflix and Youtube work fine on Internet Explorer... I tried updating plug ins, I tried uninstalling and reinstalling plug ins and I even uninstalled and reinstalled Firefox itself but nothing has helped. Not sure what steps to take next...

    Hello,
    Some problems with Flash video playback can be resolved by disabling hardware acceleration in your Flash Player settings. (See [[Flash Plugin - Keep it up to date and troubleshoot problems|this article]] for more information on using the Flash plugin in Firefox).
    To disable hardware acceleration in Flash Player:
    #Go to this [http://helpx.adobe.com/flash-player/kb/video-playback-issues.html#main_Solve_video_playback_issues Adobe Flash Player Help page].
    #Right-click on the Flash Player logo on that page.
    #Click on '''Settings''' in the context menu. The Adobe Flash Player Settings screen will open.
    # Click on the icon at the bottom-left of the Adobe Flash Player Settings window to open the Display panel. <br/> <br/>[[Image:fpSettings1.PNG]] <br/>
    # Remove the check mark from '''Enable hardware acceleration'''.
    # Click '''Close''' to close the Adobe Flash Player Settings Window.
    # Restart Firefox.
    This [http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html Flash Player Help - Display Settings page] has more information on Flash Player hardware acceleration, if you're interested.
    Does this solve the problem? Let us know.

  • Does anyone have trouble with the space bar yielding either an M or N? I am pretty careful by very frequently get this error. Anybody seen similar?

    I am not the best typist but have tried going slowly. It seems the space bar is mis-aligned and when I try to add a space I get either and M or N. Very frustrating. Is there a way to recalibrate the screen to solve this problem?

    are you connected to a wall charger while you are trying that?
    sometimes when i connect to a wall charger, the callibration gets messed up, but when there is skin contact with the back, it goes away for some reason

  • Gt-60 space bar not working

    I have had a gt60 for almost 2 years now, so it is definitely not under warranty anymore. And recently, an issue came up. When I login to windows 7, right when the login screen appears, the spacebar is continually entering, like it is being held down. I press any key and it stops. From that moment on, the space bar does not work. Then if I press "zx", the spacebar acts as if it has been held down again. it is very strange. I tried the keyboard under Linux, and the spacebar does not work. I think its a hardware issue,  but I am not sure. Any advice, or anyone experience a similar problem?

    Hi,
    Yes i have a similar problem but it is my tab key.
    It started a few months ago and went away and recently made an unfortunate return yesterday.
    My problem is that when my laptop is turned on the tab key is always "pressed", however when i used to press it it would stop and start again in a few seconds.
    This time around after i press it, it instantly goes back to the always pressed state.
    (I should also mention i think pressing caps lock also stops it briefly (<1 second) and it starts again.)
    However, after about 5 to 10 minutes of trying to use my laptop the problem goes away and i can use the tab key as normal.
    (By trying to use i mean using it while pressing tab to get it to stop for 1 second to click or do something.)
    Did you solve your problem? Let me know please!
    Or i might have to disable the laptop keyboard and buy an external one :(.

  • SPACE BAR

    HI All
            We using SAP R/3 , one end user using sap front end 7.10 . Now the problem is if the user enter the  data in sap first time . then the next time he user the space bar on his keyboard . after that he will get the old entered data come automatically . Using this option users enterd data quickly . But for one user this option were not working . Kindly advice me to resolv this problem .
    REgards
    Selvan

    Hi,
    Just login to any SAP system in which you want to get the last enter word by pressing space bar.. In the main screen click on the customize local layout icon or press (Alt+F12). -> Options->Local date (tab page) ->ON (history) and click on Apply and Ok.
    I think this will help you.
    Thanks & Regards,
    Muruga

Maybe you are looking for