Specify the order of servlet startup

Hi,
I'am trying to specify the order of the servlet startup in Iplanet 4.0 ..but not able to ..
is their any way by which we can specify the order of the servlets that should be started while starting the webserver

In answer to your original question:
970992 wrote:
However, when I look at the execution plan, I see that the last predicate (to_number(answer) > 0) has been executed the first. Henceforth, it checks many rows first. Normally, 75 rows belong to 31/12/2012 as you see from the following. Can I specify the execution order?According to the execution plan, it will do a full scan of surveys using the predicate on insertdate to build the (presumably in-memory) hash table (hash based on survey_id) to do the joins (Step 2). Then, it does a full scan of the answers table using the question_uid and answer predicates (Step 3). For each row it finds that matches those predicate, it will prpobe the hash table created in step 2 using the hashed value of survey_seq_id. So, it is doing the insertdate predicate first.
In answer to your last post
970992 wrote:
>
First of all i would get rid of the implizit type conversion:
TO_NUMBER("A"."ANSWER")>0)it is not implicit conversion, I reckon it is explicit type conversion, isnt it?
No, it is an implicit type conversion. Your code says answer > 0, since the answer column is a varchar2 column, Oracle implicitly converts the answer column to a number to compare against the number on the right side of the comparison. Note that if something like 'A' ever becomes a valid answer, then this query will fail with ORA-01722: invalid number.
>
>
Obviously "A"."ANSWER" is not a number colmun, problably varchar, so use something like
A.ANSWER != "0"
or
A.ANSWER > "0"Yes answer column is varchar2 but can you type A.ANSWER > "0" as a predicate? I mean, you can not varchar > varchar, can you?
Of course you can use inequality predicates on a varcahr column. Is the string A greater than the string B?
Based on the explain plan, your statistics might be a little off, not hugely so. The esitmates are at least in the right order of magnitude based on what you have posted so far.
What indexes, if any, are available on the two tables?
John

Similar Messages

Specifying the order of column in Excel file

How to specify the order of the columns in excel when data is exported from a table to excel.For eg. I have 2 columns in a table i.e. Base Location and Employee Number.When I export this data to the excel file the columns are displayed according to the alphabetical order i.e. Base Location first and then Employee Number. Whereas I want Employee Number column to be displayed first and then the Base Location column.
Can anyone help me on this?

Hi Sowmya,
when you refer to my Excel Export tutorial on SDN: <a href="https://wiki.sdn.sap.com/wiki/x/0mQ">Exporting Table Data Using On-Demand Streams - SAP NetWeaver 7.0</a>:
use LinkedHashMap instead of HashMap:
private Map getProductColumnInfos() {
 Map columnInfosMap = new LinkedHashMap();
 columnInfosMap.put(IPrivateTableCompBasketView.IProductsElement.QUANTITY, "Quantity");
 columnInfosMap.put(IPrivateTableCompBasketView.IProductsElement.ARTICLE, "Article");
 columnInfosMap.put(IPrivateTableCompBasketView.IProductsElement.COLOR, "Color");
 columnInfosMap.put(IPrivateTableCompBasketView.IProductsElement.PRICE, "Price in EURO");
 columnInfosMap.put(
 IPrivateTableCompBasketView.IProductsElement.TOTAL__PER__ARTICLE,
 "Total Per Article In Euro");
 return columnInfosMap;
This keeps the order of key-displaytext-pairs passed by the client (table component) to the service (excel export component) stable.
Regards, Bertram

How can we specify the order of the predicates execution?

I am going to write the following query
select answer, answer_id from surveys s join answers a on s.survey_id = a.survey_seq_id
where question_uid = 206400374 and insertdate = to_date('31/12/2012') and answer > 0;However, when I look at the execution plan, I see that the last predicate (to_number(answer) > 0) has been executed the first. Henceforth, it checks many rows first. Normally, 75 rows belong to 31/12/2012 as you see from the following. Can I specify the execution order?
select count(*) from surveys s join answers a on s.survey_id = a.survey_seq_id
where question_uid = 206400374 and insertdate = to_date('31/12/2012');
COUNT(*)
75If so, how? Because, the type of answer is varchar2 and some of answers contain text characters such as 'Yes' or 'No'. Therefore, before 31/12/2012 some answers contain 'Yes' or 'No'. However in 31/12/2012 all answers are numeric.
Plan hash value: 3217836037
| Id | Operation          | Name    | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT   |         |     2 |    68 | 9401   (1)| 00:01:53 |
|* 1 | HASH JOIN         |         |     2 |    68 | 9401   (1)| 00:01:53 |
|* 2 |   TABLE ACCESS FULL| SURVEYS |     2 |    26 |   239   (1)| 00:00:03 |
|* 3 |   TABLE ACCESS FULL| ANSWERS |   337 | 7077 | 9162   (1)| 00:01:50 |
Predicate Information (identified by operation id):
   1 - access("S"."SURVEY_ID"="A"."SURVEY_SEQ_ID")
   2 - filter("S"."INSERTDATE"=TO_DATE(' 2012-12-31 00:00:00',
              'syyyy-mm-dd hh24:mi:ss'))
   3 - filter("A"."QUESTION_UID"=206400374 AND
              TO_NUMBER("A"."ANSWER")>0)
select distinct answer from surveys s join answers a on s.survey_id = a.survey_seq_id
where question_uid = 206400374 and insertdate = to_date('31/12/2012');
ANSWER
1
3
0
2And, also I can execute the following query without any error
select to_number(answer) from surveys s join answers a on s.survey_id = a.survey_seq_id
where question_uid = 206400374 and insertdate = to_date('31/12/2012');

In answer to your original question:
970992 wrote:
However, when I look at the execution plan, I see that the last predicate (to_number(answer) > 0) has been executed the first. Henceforth, it checks many rows first. Normally, 75 rows belong to 31/12/2012 as you see from the following. Can I specify the execution order?According to the execution plan, it will do a full scan of surveys using the predicate on insertdate to build the (presumably in-memory) hash table (hash based on survey_id) to do the joins (Step 2). Then, it does a full scan of the answers table using the question_uid and answer predicates (Step 3). For each row it finds that matches those predicate, it will prpobe the hash table created in step 2 using the hashed value of survey_seq_id. So, it is doing the insertdate predicate first.
In answer to your last post
970992 wrote:
>
First of all i would get rid of the implizit type conversion:
TO_NUMBER("A"."ANSWER")>0)it is not implicit conversion, I reckon it is explicit type conversion, isnt it?
No, it is an implicit type conversion. Your code says answer > 0, since the answer column is a varchar2 column, Oracle implicitly converts the answer column to a number to compare against the number on the right side of the comparison. Note that if something like 'A' ever becomes a valid answer, then this query will fail with ORA-01722: invalid number.
>
>
Obviously "A"."ANSWER" is not a number colmun, problably varchar, so use something like
A.ANSWER != "0"
or
A.ANSWER > "0"Yes answer column is varchar2 but can you type A.ANSWER > "0" as a predicate? I mean, you can not varchar > varchar, can you?
Of course you can use inequality predicates on a varcahr column. Is the string A greater than the string B?
Based on the explain plan, your statistics might be a little off, not hugely so. The esitmates are at least in the right order of magnitude based on what you have posted so far.
What indexes, if any, are available on the two tables?
John

HTML Import : Is there a way to specify the ordering at time of multi page import?

It appears the ordering may be alphabetical.
Is there a way, maybe by placing a metadata file somewhere, to specify the import order to avoid having to set the order from Folio Producer?
Thanks,
John

I believe you want to use the sidecar.xml feature to accomplish this.
And there's a great online tool for generating the file, too:
http://projects.nordsueddesign.de/sidecarxml/

How can I use the "ORDER BY" in a block?

I know it's something with set_block_property.
let's say my block is named: bloque and my items(and columns) are the following:
first_name
last_name
age
address
(I wanna order them by address)
what's the sintax or sentence?

(1) You can specify the Order by at the time you are designing/writing your form. You do this in the Property Palette of the Block. One of the properties (under Database) is the "order by clause". Enter the name of the column you want to order by here (for example ADDRESS).
(2) At run-time you can use the "set_block_property" built-in. For example: SET_BLOCK_PROPERTY('MY_BLOCK',ORDER_BY,'ADDRESS');

How do I specify the Startup VI for a LLB in LV 8.5.1 Full?

Hi,
I recently upgraded to LabVIEW 8.5.1 from LabVIEW 7.1.1. I entered the project Build Specifications and compiled my code into a LV .llb file called "my_program.llb". I also specified the top level vi (called "main.vi") inside my_program.llb. Now I want to make "main.vi" automatically open and execute whenever the user double clicks on my_program.llb from within Windows Explorer. How can I do this in LV 8.5.1 Full?
Right now when the user double clicks on my_program.llb, the LLB Manager window opens, but "main.vi" doesn't automatically launch like it used to do back when I was using LabVIEW 7.1.1 Full.
I know it is possible to specify the Startup VI using the Professional version, but is this possible to do in the Full version?
Thanks,
Richard
Solved!
Go to Solution.

Check out this KB
Managing LabVIEW Library Files in Windows Explorer & the LLB Manager
LabVIEW 8.5 and beyond
In LabVIEW 8.5, the
option to open LLB files in Windows Explorer has been removed. However,
if you have a previous version of LabVIEW installed along with 8.5,
LLBs can still be opened through Windows Explorer if you follow the
procedure below. If you are not using another version of Labview along
with 8.5, you can change the default behavior so that an LLB that is
opened from Windows will open the top-level VI instead of the LLB in
the LLB Manager.

Specifying the output order of elements in XML using Oracle Reports.

Hi,
I am developing an Oracle Reports report, using Report
Builder 6.0.8.17.0 on WinNT. The requirement is that the report
will only ever be used to generate XML output.
However, due to a bug in the XML Parser at the other end,
it's necessary to have certain elements appear in the XML before
others.
e.g. This simplistic example shows XML output from Reports
runtime, which looks something like this:
<DEPT id="10">
<NAME>Government</NAME>
<EMP id="4435">
<SAL>12000</SAL>
<ENAME>Harry Boland</ENAME>
<EMP>
<EMP id="8643">
<SAL>21000</SAL>
<ENAME>Michael Collins</ENAME>
<EMP>
<EMP id="9900">
<SAL>47000</SAL>
<ENAME>Eamonn de Valera</ENAME>
<EMP>
<LOCATION>
<ADDRESS type="street">Kildare St.</ADDRESS>
<ADDRESS type="city">Dublin</ADDRESS>
</LOCATION>
</DEPT>
However, the application that is parsing the XML fails due to
the fact that it expects the LOCATION element to be the first
within the DEPT element. i.e. before the NAME or any of the EMP
elements.
The way I have developed this is by creating a master query
which creates a master group, G_DEPT, with two column, ID and
NAME, and two detail queries and corresponding detail groups, EMP
and LOCATION. These groups are joined to the master using the
datalink facility in Report Builder.
Is there any way in Report Builder I can specify that the
LOCATION element is to be output for each DEPT element before any
other element belonging to DEPT?
Thanks,
Iibhear.

The order of the elements is determined by the order of the columns in the Data Model. Note that you can also use the "Exclude from XML output" property to completely omit columns form the XML output.
Message was edited by:
Brian Hill
This applies to Reports 10g. I don't know if it also works in 6i.

Why aren't my datagrid columns in the order I specified?

Hi folks,
I've got a datagrid:
<mx:DataGrid xmlns:mx="
http://www.adobe.com/2006/mxml"
dataProvider="{arrPermisList}"
itemClick="gridClick(event)"
sortableColumns="false">
and a bunch of columns defined, like this:
<mx:DataGridColumn headerText="Content Type"
dataField="xxx" textAlign="center" sortable="false"/>
<mx:DataGridColumn headerText="Create"
dataField="MayCreate" textAlign="center" sortable="false"/>
The dataprovider (an array) looks like this:
private var arrPermisList:Array =
{ ContentTypeCode: "AUD", ConTypeName: "Audio Clips",
MayCreate: true, MayRead: true, MayUpdate: true, MayDelete: true,
MayModerate: true, MayAdministrate: true, MayPublish: true }
, { ContentTypeCode: "LIST",ConTypeName: "Lists", MayCreate:
true, MayRead: true, MayUpdate: true, MayDelete: true, MayModerate:
true, MayAdministrate: true, MayPublish: true }
My problem is that the grid display the columns in
ALPHABETICAL order, rather than the order in which I listed the
columns. I see from the docs this is correct behavior. But of
course, I want my columns in the order I specified, not
alphabetical. Would anyone know how to turn this feature off?
Thanks,
ws

A Smart Playlist has a small cog like icon in iTunes. A regular playlist has a a musical note on top of a piece of "sheet-music paper" icon.
If you highlight a Playlist in iTunes and select File, if Edit Smart Playlist is greyed out, then it isn't a Smart Playlist. If you can Edit Smart Playlist, then it is.
You cannot distinguish Smart Playlists from regular Playlists on the iPod Touch, they look the same.

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be

We are using EBS 12.1.3. When we input a sales order from a customer we input the sales order and specify the date the customer wants it. This isn't always the date that we intend on manufacturing it though. I need to put a customer due date in, but be able to put a date in another field that MRP can read in the event we choose to manufacture based on another date. For example, early.
Any help would be appreciated.

What you are experiencing is 100% related to Malware.
Sometimes a problem with Firefox may be a result of malware installed on your computer, that you may not be aware of.
You can try these free programs to scan for malware, which work with your existing antivirus software:
* [http://www.microsoft.com/security/scanner/default.aspx Microsoft Safety Scanner]
* [http://www.malwarebytes.org/products/malwarebytes_free/ MalwareBytes' Anti-Malware]
* [http://support.kaspersky.com/faq/?qid=208283363 TDSSKiller - AntiRootkit Utility]
* [http://www.surfright.nl/en/hitmanpro/ Hitman Pro]
* [http://www.eset.com/us/online-scanner/ ESET Online Scanner]
[http://windows.microsoft.com/MSE Microsoft Security Essentials] is a good permanent antivirus for Windows 7/Vista/XP if you don't already have one.
Further information can be found in the [[Troubleshoot Firefox issues caused by malware]] article.
Did this fix your problems? Please report back to us!

Can't specify the customer to use a new sales order type ,why?

I created a new sales order type, finished the configeration.. but when I use it to create a order by t_code VA01 ,input the order type and sales area ,then enter, why the sold-to-party and ship-to-party are inmodifiable? i can't specify the customer... where is the problem?
appreciate you help.thank you !

Hi Sue,
I think u havent did the Partner determination for that Sales document. If you create ur own sales doc type in VOV8 ,new entries.
U need to maintain the Partner determination for that sales doc type.
this is the same,the way u maintaint the customer partner determination.
If you dont maintain this , in VA01 screen, u cant able to enter Sold to & ship to parties as it will be in display mode. I think the same error ur getting know as per ur issue.
This will def solve ur issue as i faced n overcome long back.
*reward points ,if helpful

How to specify the servlet in the ACTION field in FORM in jsp, html pages?

I have problem when I return back to the page prova3.html from the servlet because in the address bar it give me this path:
http://192.168.161.209:8988/Workspace3-Project1-context-root/servlet/servlet/Servlet1
two times servlet/ why? and what I have to put in the action field?
This is my form in page prova3.html:
<form action="servlet/Servlet1" method="post" id="search" style="font: bold 80% Arial,sans-serif; color: #334d55;" >
<input type="hidden" name="pagina" value="1"/>
user<input name="username" type="text" size="10" style="font-size: 12px;"/>
password<input name="password" type="password" size="10" style="font-size: 12px;"/>
<input name="login" type="submit" value="Login" style="font-size: 12px; font-family: Arial,sans-serif;"/>
</form>
The redirection form servlet to pages is:
private void toProvaPage(HttpServletRequest request, HttpServletResponse response) throws
ServletException, IOException {
RequestDispatcher rd = getServletContext().getRequestDispatcher(
"/prova.jsp");
rd.forward(request, response);
private void toIndexPage(HttpServletRequest request, HttpServletResponse response) throws
ServletException, IOException {
RequestDispatcher rd = getServletContext().getRequestDispatcher(
"/prova3.html");
rd.forward(request, response);
Thanks, but I can solve this problem.

This is my web.xml file where the mapping is specified, this is the thing that I can't understand.
<web-app>
<description>Empty web.xml file for Web Application</description>
<display-name>public_html</display-name>
<servlet>
<servlet-name>Servlet1</servlet-name>
<servlet-class>servlet.Servlet1</servlet-class>
</servlet>
<servlet-mapping>
<servlet-name>Servlet1</servlet-name>
<url-pattern>/servlet1</url-pattern>
</servlet-mapping>
<session-config>
<session-timeout>35</session-timeout>
</session-config>
<mime-mapping>
<extension>html</extension>
<mime-type>text/html</mime-type>
</mime-mapping>
<mime-mapping>
<extension>txt</extension>
<mime-type>text/plain</mime-type>
</mime-mapping>
</web-app>
Thanks

FRM-92101 There was a failure in the forms server during startup

Hi guys when running EBS i am getting this error:
it happens when i try to load any form i.e hrms managemnet --> work structure -> organization
error : FRM-92101 There was a failure in the forms server during startup
this could happen due to invalid configuration
please look into webserver log file for detail
following are the formsweb.cfg file details:
-------------------------------------------------------------------------------start----------------------------------------
[oratest@kapp server]$ vi formsweb.cfg
[oratest@kapp server]$ tail -1000 formsweb.cfg
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/mnt/extdrive/VIS/apps/tech_st/10.1.2/
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=orac
------------------------------------------------------end----------------------------------------------
plz help
regards,
kashif

Hi Hussein,
i got the error in application log that libXm.so.2 is missing, then i installed openmotif to resolve it, but after that form window is not opening.
and application log is as follows:
10/10/22 18:41:45.258 10.1.3.0.0 Started
10/10/22 18:41:46.981 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/22 18:41:46.993 formsweb: 10.1.3.0.0 Started
10/10/22 18:44:38.873 formsweb: ListenerServlet init()
10/10/22 18:44:40.204 formsweb: Forms session <1> failed during startup: no response from runtime process
10/10/22 18:44:40.206 formsweb: Forms session <1> exception stack trace:
oracle.forms.engine.RunformException: Forms session <1> failed during startup: no response from runtime process
at oracle.forms.servlet.RunformProcess.connect(Unknown Source)
at oracle.forms.servlet.RunformProcess.dataToRunform(Unknown Source)
at oracle.forms.servlet.RunformSession.dataToRunform(Unknown Source)
at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:719)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:376)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:870)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:451)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:299)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind[Oracle Containers for J2EE 10g (10.1.3.0.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 14:57:11.795 10.1.3.0.0 Started
10/10/23 14:57:22.415 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 14:57:22.641 formsweb: 10.1.3.0.0 Started
10/10/23 15:01:33.111 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:05:56.542 10.1.3.0.0 Started
10/10/23 15:05:58.541 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:05:58.652 formsweb: 10.1.3.0.0 Started
10/10/23 15:15:29.23 formsweb: Servlet error
java.io.IOException: Broken pipe
at sun.nio.ch.FileDispatcher.write0(Native Method)
at sun.nio.ch.SocketDispatcher.write(SocketDispatcher.java:29)
at sun.nio.ch.IOUtil.writeFromNativeBuffer(IOUtil.java:104)
at sun.nio.ch.IOUtil.write(IOUtil.java:75)
at sun.nio.ch.SocketChannelImpl.write(SocketChannelImpl.java:302)
at java.nio.channels.Channels.write(Channels.java:60)
at java.nio.channels.Channels.access$000(Channels.java:47)
at java.nio.channels.Channels$1.write(Channels.java:134)
at com.evermind.server.http.AJPOutputStream.endRequest(AJPOutputStream.java:117)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:306)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:187)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
10/10/23 15:32:28.558 formsweb: 10.1.3.0.0 Stopped
10/10/23 15:33:44.992 10.1.3.0.0 Started
10/10/23 15:33:46.570 formsweb: FormsServlet init():
configFileName: /mnt/extdrive/VIS/inst/apps/VIS_kapp/ora/10.1.2/forms/server/appsweb.cfg
testMode: false
10/10/23 15:33:46.610 formsweb: 10.1.3.0.0 Started
regards,
kashif

FRM-92101- There is a failure in the form server during startup.

Hi,
I'm deploying a forms 10g application . I'm using Oracle Application Server Forms and Reports Services 10.1.2.0.2 under Red Hat Enterprise Linux 5, along with an Oracle 10g Database on another server. Every time I try testing the form services using http://10.0.4.114:7778/forms/frmservlet it brings out the errorFRM-92101- There is a failure in the form server during startup. This could happen due to invalid configuration. Please look into the web server log file for detail
Right now, I'm a bit lost. Can anyone please tell me if there is some parameter I have to set, or something I should do to make it work?
Thanks a lot

Fabian,
I did not make changes to those files. The forms services are working on another server with Red hat Rel 4 and 3 . What I did is to configure a new server with Red Hat Rel 5 , took the backup of all the forms binaries and the HOME and restore on the new server. I did the same thing for a server running rel 4 and it has no issue:
The content of the files are as below:
DEFAULT.ENV*
# $Id: default.env 26-apr-2005.16:59:08 sujain Exp $
# default.env - default Forms environment file, Solaris version
# This file is used to set the Forms runtime environment parameters.
# If a parameter is not defined here, the value used will be that defined
# in the environment in which the servlet engine (OC4J or JServ) was started.
# NOTES
# 1/ The Forms installation process should replace all occurrences of
# <percent>FORMS_ORACLE_HOME<percent> with the correct ORACLE_HOME
# setting, and all occurrences of <percent>O_JDK_HOME<percent> with
# the location of the JDK (usually $ORACLE_HOME/jdk).
# Please make these changes manually if not.
# 2/ Some of the variables below may need to be changed to suite your needs.
# Please refer to the Forms documentation for details.
ORACLE_HOME=/u01/oracle10g_Forms
FORMS_PATH=/u/oracle/bank/gmx
REPORTS_PATH=/u/oracle/bank/fonts
#TWO_TASK=rac.world4
TWO_TASK=server.world
#TWO_TASK=server1.world
#TWO_TASK=s0999001.world4
#TWO_TASK=s0202001.world4
#TWO_TASK=server.world4
NLS_LANG=AMERICAN_AMERICA.AR8MSWIN1256
NLS_DATE_FORMAT=DDMMYYYY
# Search path for Forms applications (.fmx files, PL/SQL libraries)
# FORMS_PATH=/u01/oracle10g_Forms/forms
# webutil config file path
WEBUTIL_CONFIG=/u01/oracle10g_Forms/forms/server/webutil.cfg
# Disable/remove this variable if end-users need access to the query-where
# functionality which potentially allows them to enter arbitrary SQL
# statements when in enter-query mode.
FORMS_RESTRICT_ENTER_QUERY=TRUE
# Java class path
# This is required for the Forms debugger
# You can append your own Java code here)
# frmsrv.jar, repository.jar and ldapjclnt10.jar are required for
# the password expiry feature to work(#2213140).
CLASSPATH=/u01/oracle10g_Forms/j2ee/OC4J_BI_Forms/applications/formsapp/formsweb/WEB-INF/lib/frmsrv.jar:/u01/oracle10g_Forms/jlib/repository.jar:/u01/oracle10g_Forms/jlib/ldapjclnt10.jar:/u01/oracle10g_Forms/jlib/debugger.jar:/u01/oracle10g_Forms/jlib/ewt3.jar:/u01/oracle10g_Forms/jlib/share.jar:/u01/oracle10g_Forms/jlib/utj.jar:/u01/oracle10g_Forms/jlib/zrclient.jar:/u01/oracle10g_Forms/reports/jlib/rwrun.jar:/u01/oracle10g_Forms/forms/java/frmwebutil.jar:/u01/oracle10g_Forms/forms/java/frmrwinteg.jar:/u01/oracle10g_Forms/forms/java/webutil.jar
# The PATH setting is not required for Forms if the Forms executables are
# in <ORACLE_HOME>/bin. However, it is required if Graphics applications
# are called from Forms applications.
PATH=/usr/bin:/sbin:/bin:/u01/oracle10g_Forms/bin
# Settings for Reports
# NOTE: This setting is only needed if Reports applications
# are called from Forms applications
# However, because of bug 2336698 where a report is started from
# a forms debugger session with an already running JVM, then
# the report's class path should also be included in the forms
# class path.
# We no longer need to set REPORTS_CLASSPATH as forms will
# always start the JVM before calling reports.
# Settings for Graphics
# NOTE: These settings are only needed if Graphics applications
# are called from Forms applications
# Please uncomment the following and put the correct 6i
# oracle_home value to use Graphics applications.
#ORACLE_GRAPHICS6I_HOME=<your Graphics 6i oracle_home here>
# Search path for Graphics applications
GRAPHICS60_PATH=
# Settings for Forms tracing and logging
# Note: This entry has to be uncommented to enable tracing and
# logging.
#FORMS_TRACE_PATH=<FORMS_ORACLE_HOME>/forms/server
# System settings
# You should not normally need to modify these settings
# Path for shared library objects
# This is highly platform (if not machine) specific ! At install time
# <percent>LD_LIBRARY_PATH<percent> should be replaced with the
# actual value of the LD_LIBRARY_PATH environment variable (at install
# time). That should ensure we have the paths for such necessities as
# the motif and X11 libraries.
# Explanations:
# - Reports needs the path for libjava.so
# (.../jre/lib/sparc)
# - Forms needs two paths to the jre, for libjvm.so and libhpi.so
# - In JDK 1.4.1 the location of libjvm.so is lib/sparc (there is no
# classic directory) so we do not include the .../classic directory
# below. There are other versions of libjvm.so (in directories server,
# client and hotspot) but we will use the version in lib/sparc for now.
LD_LIBRARY_PATH=/u01/oracle10g_Forms/lib:/u01/oracle10g_Forms/jdk/jre/lib/i386:/u01/oracle10g_Forms/jdk/jre/lib/i386/server:/u01/oracle10g_Forms/jdk/jre/lib/i386/native_threads:/u01/oracle10g_Forms/inventory/filemap/jre/1.4.2/lib/i386/client:/u01/oracle10g_Forms/inventory/filemap/jre/1.4.2/lib/i386:/usr/lib:/u01/oracle10g_Forms/jdk/jre/lib/i386/server:/u01/oracle10g_Forms/jdk/jre/lib/i386/native_threads:/u01/oracle10g_Forms/jdk/jre/lib/i386:/u01/oracle10g_Forms/jdk/jre/lib/i386:/usr/lib:/u01/oracle10g_Forms/lib:/u01/oracle10g_Forms/classes/lib:/u01/oracle10g_Forms/ifs1.1/lib:/u01/oracle10g_Forms/jis/lib
LD_ASSUME_KERNEL=2.4.19
FORMSWEB*
# $Id: formsweb.cfg 15-apr-2005.13:17:30 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (frmservlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overridden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/forms/frmservlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime processes
envFile=default.env
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
#form=test.fmx
form=B08SSS20.fmx
# Forms runtime argument: database connection details
userid=guiusr/guiusr
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array% obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record% tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms/lservlet
# Forms applet parameter
codebase=/forms/java
# Forms applet parameter
imageBase=DocumentBase
# Forms applet parameter
width=900
# Forms applet parameter
height=800
# Forms applet parameter
separateFrame=true
# Forms applet parameter
splashScreen=no
# Forms applet parameter
background=no
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=blue
# Forms applet parameter
logo=no
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=frmall_jinit.jar,timeout.jar,frmrwinteg.jar,webutil.jar
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer, etc)
archive=frmall.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=30
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0022-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,22
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.22
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/archive/j2se/1.4.2_06/index.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:CAFEEFAC-0014-0002-0006-ABCDEFFEDCBA
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/autodl/jinstall-1_4_2-windows-i586.cab#Version=1,4,2,06
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;jpi-version=1.4.2_06
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=1
# Single Sign-On OID configuration parameter
oid_formsid=%OID_FORMSID%
# Single Sign-On OID configuration parameter
oracle_home=/u01/oracle10g_Forms
# Single Sign-On OID configuration parameter
formsid_group_dn=%GROUP_DN%
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=true
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# EndUserMonitoring
# EndUserMonitoringEnabled parameter
# Indicates whether EUM/Chronos integration is enabled
EndUserMonitoringEnabled=
# EndUserMonitoringURL
# indicates where to record EUM/Chronos data
EndUserMonitoringURL=
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/forms/frmservlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
# Example Named Configuration Section
# Example 3: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms/lservlet/debug
# Sample configuration for deploying WebUtil. Note that WebUtil is shipped with
# DS but not AS and is also available for download from OTN.
[webutil]
WebUtilArchive=frmwebutil.jar,jacob.jar
WebUtilLogging=off
WebUtilLoggingDetail=normal
WebUtilErrorMode=Alert
WebUtilDispatchMonitorInterval=5
WebUtilTrustInternal=true
WebUtilMaxTransferSize=16384
baseHTMLjinitiator=webutiljini.htm
baseHTMLjpi=webutiljpi.htm
archive_jini=frmall_jinit.jar
archive=frmall.jar
lookAndFeel=oracle
[ref]
#serverURL=/forms/lservlet/perf
serverURL=/forms/lservlet/
#otherparams=P_WST_LAN_IND=1 record=forms tracegroup=0-199
#envFile=default.env
[nat]
#serverURL=/forms/lservlet/perf
serverURL=/forms/lservlet/sessionperf
#envFile=defaultar.env
ERROR IN Java console is
Oracle JInitiator: Version 1.3.1.22
Using JRE version 1.3.1.22-internal Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\akintayo.beckley.GTBANK
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
proxyHost=null
proxyPort=0
connectMode=HTTP, native.
oracle.forms.net.ConnectionException: Forms session <1> failed during
startup: no response from runtime process
at
oracle.forms.net.ConnectionException.createConnectionException(Unknown
Source)
at oracle.forms.net.HTTPNStream.getResponse(Unknown Source)
at oracle.forms.net.HTTPNStream.doFlush(Unknown Source)
at oracle.forms.net.HTTPNStream.flush(Unknown Source)
at java.io.DataOutputStream.flush(Unknown Source)
at oracle.forms.net.HTTPConnection.connect(Unknown Source)
at oracle.forms.engine.FormsDispatcher.initConnection(Unknown Source)
at oracle.forms.engine.FormsDispatcher.init(Unknown Source)
at oracle.forms.engine.Runform.initConnection(Unknown Source)
at oracle.forms.engine.Runform.startRunform(Unknown Source)
at oracle.forms.engine.Main.createRunform(Unknown Source)
at oracle.forms.engine.Main.start(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)

Order of servlet mapping in web.xml

Hello,
is the order of multiple <servlet-mapping> in web.xml important? Or it doesn't matter in which order they are declared?
For example, if i have two controllers, one is
<servlet-name>Faces Servlet</servlet-name>
<servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
<load-on-startup>1</load-on-startup>
</servlet>
and the second:
<servlet>
 <servlet-name>FrontController</servlet-name>
 <servlet-class>servlets.FrontController</servlet-class>
</servlet>
and the mapping are:
 <servlet-mapping>
 <servlet-name>FrontController</servlet-name>
 <url-pattern>/jsf/*</url-pattern>
</servlet-mapping>
<servlet-mapping>
 <servlet-name>Faces Servlet</servlet-name>
 <url-pattern>*.jsf</url-pattern>
</servlet-mapping>where /jsf/ contains jsp pages containing jsf components.
is the order important?
And may second question is:
if i call the jsp page test.jsf in /jsf/test.jsp , which controller is responseble? Faces servlet or Frontcontroller?

Here is what the 2.4 specification says on the matter (section SRV.11.1):
>
The path used for mapping to a servlet is the request URL from the request
object minus the context path and the path parameters. The URL path mapping rules below are used in order. The first successful match is used with no further matches attempted:
1. The container will try to find an exact match of the path of the request to the
path of the servlet. A successful match selects the servlet.
2. The container will recursively try to match the longest path-prefix. This is done by stepping down the path tree a directory at a time, using the �/� character as a path separator. The longest match determines the servlet selected.
3. If the last segment in the URL path contains an extension (e.g. .jsp), the servlet container will try to match a servlet that handles requests for the extension. An extension is defined as the part of the last segment after the last �.� character.
4. If neither of the previous three rules result in a servlet match, the container will attempt to serve content appropriate for the resource requested. If a "default" servlet is defined for the application, it will be used.
The container must use case-sensitive string comparisons for matching.
It also notes that in prior versions of the specification these were only a suggestion so if you are on servlet 2.3 or prior, you need to consult the documentation for your container.
So, to answer your questions, no, order in the descriptor is not important.
Also, based on the rules above, using your mappings, any URL starting with /jsf will be handled by FrontController including /jsf/test.jsp and /jsf/test.jsf.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.

I am using the Order Analysis Toolkit and want to get more information about the compensation for "Reference Signal Processing", which is scarce in the manuals, the website and the examples installed with the toolkit.
In particular, I am analyzing the example "Even Angle Reference Signal Processing (Digital Tacho, DAQmx).vi", whose documentation I am reproducing in the following:
DESCRIPTIONS:
This VI demonstrates how to extract even angle reference signals and remove the slow-roll errors. It uses DAQmx VIs to acquire sound or vibration signals and a digital tachometer signal. This VI includes a two-step process: acquire data at low rotational speed to extract even angle reference; use the even angle reference to remove the errors in the vibration signal acquired at normal operation.
INSTRUCTIONS:
1. Run the VI.
2. On the DAQ Configurations tab, specify the sample rate, samples per channel, device and channel configurations, and tachometer channel information.
NOTE: You need to use DSA PXI-447x/PXI-446x and PXI TIO device in a PXI chassis to run this example. The DSA device must be in slot 2 of the PXI chassis.
3. Switch to Extract Even Angle Reference tab. Specify the number of samples to acquire and the # of revs in reference which determines the number of samples in even angle reference. Click Start to take a one-shot data acquisition of the vibration and tachometer signals. After the acquisition, you can see the extracted even angle references in Even Angle Reference.
4. Switch to the Remove Slow-roll Errors tab. Click Start to acquire data continuously and view the compensate results. Click Stop in this tab to stop the acquisition.
ORDER ANALYSIS VIs USED IN THIS EXAMPLE:
1. SVL Scale Voltage to EU.vi
2. OAT Digital Tacho Process.vi
3. OAT Get Even Angle Reference.vi
4. OAT Convert to Even Angle Signal.vi
5. OAT Compensate Even Angle Signal.vi
My question is: How is the synchronization produced at the time of the compensation ? How is it possible to eliminate the errors in a synchronized fashion with respect to the surface of the shaft bearing in mind that I am acquired data at a low rotation speed in order to get the "even angle reference" and then I use it to remove the errors in the vibration signal acquired at normal operation. In this application both operations are made in different acquisitions, therefore the reference of the correction signal is lost. Is it simply compensated without synchronizing ?
Our application is based on FPGA and we need to clarity those aspects before implementing the procedure.
Solved!
Go to Solution.

Hi CracKatoA.
Take a look at the link bellow:
http://forums.ni.com/ni/board/message?board.id=170&message.id=255126&requireLogin=False
Regards,
Filipe Silva

Specify the order of servlet startup

Similar Messages

Maybe you are looking for