Split a shape in two parts?

Hello,
I've drawn a Pin (not the one attached, just as a reference) and I'm trying to split it in way of either a zigzag or wavy line. I've placed a wavy line by going to draw line, distort and transform, then putting it on top of my shape and trying to use the Pathfinder tool. It does split it but just in two half and no wavy or zig zag edges?
Please help

Transparency mask should work for you. If you want to move the two halves apart, then do it this way - two copies of the art with a mask on each.
If you want a split that just masks the center, do it like this:
Change the settings on Clip and Invert Mask checkboxes to get the result you want.

Similar Messages

How to split a text in two parts?

Hello everyone,
I'm trying to make a text appearance, with a smilar effect as the one in this video (1 mn 43) :
After Effects Template : 65 Title Animations - YouTube
My problem is, I'd like to split my text in two parts, at the middle of a letter, so I can separate the text in two parts then gather it up at the end of the animation.
I've tried to take a look at the text's animation tool, where you can make it spin, or rotate and this kind of stuff, but I can't find out how to make a letter really split at its middle.
Thank you in advance and sorry for my english.

Duplicate your text layer and mask.

How to split the records into two parts

Hi experts,
I have a field with 75 char length, this field have records also, Now i want to split the field into two differnt fields. That means upto first 40 char goes to one field, from 41st char to 70 char goes to another field, for that how to split record into two parts.
Plz advice this,
Mohana

Hi,
Do the following:
f1 = fsource(40).
f2 = fsource+40(30).
where fsource is the 70 character original string and target strings are f1 (length 40) and f2 (length 30).
Cheers,
Aditya
Edited by: Aditya Laud on Feb 22, 2008 2:10 AM

Oracle rownum usage for splitting a Table into two equal parts.

Hi All,
I have a table which has like 1.2 billion records and i would have to split the table in two parts for my Archiving needs.Unfortunately that table does not have any unique key or primary key or data stamp which i can rely for.
I would have to use the rownum concept to divide the table.
I am using the below
SELECT * FROM (SELECT ENAME, SAL FROM EMP ORDER BY SAL DESC) WHERE ROWNUM < 5000000;
But the problem is that the table is taking forever to retrieve as it has to do a order by and then retrieve the data as per the where clause.
The question i have is that instead of using a orderby clause to get the same rownum for the row every time, can i directly rely on the fact that the database is read only and the Rownum would remain same even without oder by clause....
Thanks....

WARNING! There is a bug in the code, see EDIT: at bottom of post for details
Justin,
It makes sense that Oracle could order over rowid without sorting, but I see a sort in the explain plan:
SQL> create table t as select 1 as data
2 from all_objects
3 where rownum <= 100000;
Table created.
SQL> explain plan for select *
2 from (select t.*, row_number() over (order by rowid) rn from t)
3 where rn < 50000;
Explained.
SQL> select * from table(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
Plan hash value: 327232321
| Id | Operation                | Name | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT         |      | 99651 | 2530K|       |   489   (3)| 00:00:07 |
|* 1 | VIEW                    |      | 99651 | 2530K|       |   489   (3)| 00:00:07 |
|* 2 |   WINDOW SORT PUSHED RANK|      | 99651 | 2432K| 7056K|   489   (3)| 00:00:07 |
|   3 |    TABLE ACCESS FULL     | T    | 99651 | 2432K|       |    31   (7)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter("RN"<50000)
   2 - filter(ROW_NUMBER() OVER ( ORDER BY ROWID)<50000)875820,
What are you doing with the results of the select to archive the table in two pieces? If the archive is in the DB in two seperate tables, multi table insert would be an option:
SQL> create table archive_1 (data number);
Table created.
SQL> create table archive_2 (data number);
Table created.
SQL> explain plan for insert when mod(rn, 2) = 0 then into archive_2 (data) values (data)
2 else into archive_1 (data) values(data)
3 select rownum as rn, data
4 from t;
Explained.
SQL> select * from table(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
Plan hash value: 828723766
| Id | Operation             | Name      | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | INSERT STATEMENT      |           | 99651 | 2530K|    31   (7)| 00:00:01 |
|   1 | MULTI-TABLE INSERT   |           |       |       |            |          |
|   2 |   INTO                | ARCHIVE_2 |       |       |            |          |
|   3 |   INTO                | ARCHIVE_1 |       |       |            |          |
|   4 |    VIEW               |           | 99651 | 2530K|    31   (7)| 00:00:01 |
|   5 |     COUNT             |           |       |       |            |          |
|   6 |      TABLE ACCESS FULL| T         | 99651 | 1265K|    31   (7)| 00:00:01 |
SQL> insert when mod(rn, 2) = 0 then into archive_2 (data) values (data)
2 else into archive_1 (data) values(data)
3 select rownum as rn, data
4 from t;
100000 rows created.Another option would be to use the last digit of rowid to split the table into two groups, but they will not be equal sized.
SQL> explain plan for select *
2 from t
3 where substr(rowid, length(rowid), 1) = upper(substr(rowid, length(rowid), 1))
4 or substr(rowid, length(rowid), 1) in ('0', '1', '2', '3', '4');
Explained.
SQL> select * from table(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
Plan hash value: 2153619298
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      | 59025 | 1441K|    98 (71)| 00:00:02 |
|* 1 | TABLE ACCESS FULL| T    | 59025 | 1441K|    98 (71)| 00:00:02 |
Predicate Information (identified by operation id):
   1 - filter(SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='0
              ' OR SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='1' OR
              SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='2' OR
              SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='3' OR
              SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)='4' OR
              SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)=UPPER(SUBSTR(ROW
              IDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)))
Note
   - dynamic sampling used for this statement
23 rows selected.
SQL> explain plan for select *
2 from t
3 where substr(rowid, length(rowid), 1) <> upper(substr(rowid, length(rowid), 1))
4 and substr(rowid, length(rowid), 1) not in ('0', '1', '2', '3', '4');
Explained.
SQL> select * from table(DBMS_XPLAN.DISPLAY);
PLAN_TABLE_OUTPUT
Plan hash value: 2153619298
| Id | Operation         | Name | Rows | Bytes | Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT |      | 40627 |   991K|    41 (30)| 00:00:01 |
|* 1 | TABLE ACCESS FULL| T    | 40627 |   991K|    41 (30)| 00:00:01 |
Predicate Information (identified by operation id):
   1 - filter(SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'
              0' AND SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'1' AND
              SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'2' AND
              SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'3' AND
              SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>'4' AND
              SUBSTR(ROWIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)<>UPPER(SUBSTR(RO
              WIDTOCHAR(ROWID),LENGTH(ROWIDTOCHAR(ROWID)),1)))
Note
   - dynamic sampling used for this statement
23 rows selected.
SQL> select count(*)
2 from t
3 where substr(rowid, length(rowid), 1) = upper(substr(rowid, length(rowid), 1))
4 or substr(rowid, length(rowid), 1) in ('0', '1', '2', '3', '4');
COUNT(*)
     59242
SQL> select count(*)
2 from t
3 where substr(rowid, length(rowid), 1) <> upper(substr(rowid, length(rowid), 1))
4 and substr(rowid, length(rowid), 1) not in ('0', '1', '2', '3', '4');
COUNT(*)
     40758
EDIT:
I realized that I screwed up above. In hind sight I don't know what I was thinking. I was attempting to use X = upper(X) to find the upper case characters A-Z. So the two queries to split rows based on the last character of rowid are not right. I don't have time to fix now, but wanted to leave a note of warning.
Edited by: Shannon Severance on Jul 29, 2011 1:34 AM

Two part text messages

Why does the KIN split text messages into two parts? Then it sends a msg to the sender about it. Is there a setting to get rid of this annoying problem?

debiq, the messages will be broken up to 160 characters regardless. What i meant by there is no problem, is that you have unlimited texting, so it isn't like you are going to go over your texting limit. With any mobile device, the SMS limit on characters is 160. However, with verizon-to-verizon, you can send up to 1000 characters. With the Kins, it will break it up anyways, even if it is a verizon customer, and that is the one downside. The main thing that the Kins are missing are the standard Verizon 'character counter', so you don't quite know when you are moving on to another text. I personally don't know too many of the people i text's service providers, and even if i did, i wouldn't make too much of it, so it isn't a big deal with me. And assuming the person on the recieving end is verizon, even with the smallest texting plan, they get unlimited Verizon-to-verizon messaging. Look at the plan specifics located on the Verizon webpage if you want specifics, but most of them do have this.
What i meant by it is a huge blessing, well that is in comparison to my old phone. My old phone would send messages to other verizon customers just fine, up to 1000 characters, but hte problem was when i texted over 160 characters to non-verizon customers (which is the majority, considering there's at&t, t-mobile, and sprint who are all also major national services), what it would do is simply send the first 160, and then send me an auto-reply saying that the message was over 160 characters. I would then have to manually re-send the other half of it, and especially if the message was really long, with no copy-paste features on non-smartphones coupled with a really slow backspace repeater, you can imagine how much of a pain it was to deal with this. On hte Kins, you just text away, and even if you're over 160 characters, it will automatically break it into multiple texts for you and send them all. SMS (simple messaging system) always were limited to 160, but with MMS (multimedia messages aka picture messages), you can send up to 1000 to any provider; however, there are a lot fewer people that have MMS plans, so i would avoid sending picture messages as a replacement for regular messages.
I'm sorry for the poor wording in the info i stated before.

Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2

Please help, I am trying to split a HD mp4 video into two parts using Quicktime 10.2, running Mountain Lion. I use trim then export but it doesn't give the movie option as a format. What would you suggest i do?

I'm not sure why you're using a FAT32 drive, but using ExFAT instead of FAT32 would be a better overall choice as it doesn't have the 4 Gig limit.
http://www.tech-recipes.com/rx/2801/exfat_versus_fat32_versus_ntfs/

How to split currency into two parts at dot

Hi,
I am working in ECC6.0.
how can I split a currency field into two parts split at dot ( . )
I cannot use SPLIT AT for currency field. All FMs I found does not works for currency.
Reagrds,
Divya

DId u check G_DECIMAL_PLACES_GET ?
You can use this FM to find the decimal places in the currency .

Split one Post OFfice in two parts

Hi there!
I have problems with my Poa, because I'm having problems with I/O. Despite of all,
my POA is about 250 GB and I think that it's pretty big. So I have a lot of "batch users"
that are receiving a lot of emails with low priority, and I am thinking in split my post office
in two parts:
1) personal/phyisical users (humans): my actual post office. With SAN storage (expensive)
and priority backups.
2) non humans: batch users, iScsi storage , cheap and only a backup in saturday.
The question is: I saw that there is a procedure to move an user from one post office
to another, but these users have a lot of proxy accesses and rules. These options
are saved in the move? I mean, there are rules for forward emails to users in post office 1).
Does the system relocalize these users from post office 2) in post office 1) ?
I know that the best test would test with one test user... but just in case.
Thank you all!

In article <[email protected]>,
Antoniogutierrez wrote:
> I have problems with my Poa, because I'm having problems with I/O.
> Despite of all,
instead of putting a lot of effort into splitting this little
PostOffice into two, how about looking at the I/O challenges as fixing
them might be much more effective. Might even help you elsewhere as
well.
What plateform are you running on? Hypervisor? What is the storage
access type?
What are the particular I/O challenges you are hitting?
Andy of
http://KonecnyConsulting.ca in Toronto
Knowledge Partner
http://forums.novell.com/member.php/75037-konecnya
If you find a post helpful and are logged in the Web interface, please
show your appreciation by clicking on the star below. Thanks!

How do I save a long video clip which I've split into two parts; save it as two seperate clips?

I've split a video about 25 minutes into two parts; now how do I save the parts separately (as two different clips)?

smwproductions
What version of Premiere Elements and on what computer operating system is it running?
Do you want to export these two clips from the same Timeline? If so, you can selectively export them.
Two critical details for this...
a. Set the gray tabs of the Work Area Bar to span just the segment that you want to export
and
b. Have a check mark next to the option Share Work Area Bar Only in the export settings. Not all export
choices have this option. But, it is a must have for this select exporting.
You can set the gray tabs of the Work Area Bar with keyboard shortcuts...
Move the Timeline Indicator to the beginning of the segment to be exported. Then as you hold down the
Alt key of the computer keyboard, hit the left bracket key [
Move the Timeline Indicator to the end of the segment to be exported. Then as you hold down the
Alt key of the computer keyboard, hit the right bracket key ]
The following is a quick look at the gray tabs and the Work Area Bar to which I am referring.
This screenshot is from a Premiere Elements version earlier than 11, but it conveys the concept of gray tabs and
Work Area Bar in the Edit area as well as the option Share Work Area Bar Only in the export settings.
Please le me know if you have any questions or need clarification on any of the above.
Thank you.
ATR
Add On...I am strictly an Elements Windows user. The same principles should hold for Premiere Elements Mac.
Not sure how the Alt will translate for match in this keyboard shortcut - Option or something else?

Ksh. Integer value splitted into two parts

Hi ,
I have code like below in my Ksh script, and getting the sample_id value as '2003 15588' instead of '200315588'
I'm using this sample_id to run an oracle report. Any help on why the value is getting splitted into two parts like 2003 15588.
if (( CHECKS == 0 )) || (( CHECKS == 1 ))
then
V_SAMPLE_ID=$( $ORACLE_HOME/bin/sqlplus -S / <<EOF
whenever sqlerror exit 1 rollback;
whenever oserror exit 1 rollback;
--Set up pagesize parameters.
set newpage 0;
set space 0;
set echo off;
set pagesize 0;
set heading off;
set verify off;
set feedback off;
set trimspool off;
set termout on;
set colsep "";
set linesize 5;
select substr(SAMPLE_ID,1,15) from sample_m
where NAME=$MFGLBL and TVALUE=$C_SAMPLE;
exit;
EOF
v_count=$?
print "V_SAMPLE_ID: $V_SAMPLE_ID" >> $LOG_FILE
fi
Pls help . thanks.

Here the actual outputs,
from SqlPlus,
SQL> select substr(SAMPLE_ID,1,15) from nais_sample_attributes where NAME='MFG LABEL NUMBER' and te
xt_value ='9300141751';
SUBSTR(SAMPLE_I
200315588
used the same query in the script , only difference is name and text_value are
passing as variables.
from script log file,
/app/oracle/product/dev6i/bin/rwrun60 /app//reports/105.rep /@DB18 BATCH=YES DESTYPE=PRINTER DESNAME=nullprinter DESFORMAT=PDF P_SAMPLE_ID=20031 5588
in the script , when i tried ,
substr(SAMPLE_ID,1,5 ) it returns 20031 and
substr(SAMPLE_ID,1,6) it returns 20031 5.

Container hirearchy for splitting screen into two parts.

I have the following requirement.
I need a screen split in two parts. The left part will always contain a tree menu (JTree) and the right part will be loaded according to the node selected in the left part of the screen (i.e. JTree). I understand that I have to use JSplitPane for dividing the screen and the top level container should be JFrame. But I am not sure of the container hirearchy for both the JTree and the right part of the screen.
regards,
nirvan

Based on that very limited description I would guess -
-- in the left part, a JScrollPane containing a JTree
-- in the right part, a JPanel with CardLayout, containing other JPanels with appropriate layouts and content. Or if the content is larger than the screen space available, you mat need to enclose the CardLayout panel in a JScrollPane too.
db

How to split XML document into two

I want to create new docuemnt by taking part of the existent XML document under the node document_text
vNodeList := xmldom.getElementsByTagName(vdoc, 'document_text');
vNode := xmldom.item(vNodeList, 0); -- The xmldom.getNodeName(vNode) of this node is exactly what i am
-- looking for
vdoc:= xmldom.makeDocument( vNode);
insert into cltab values (empty_clob()) returning cl into cl;
xmldom.writeToClob(vdoc_txt, cl);
But after that i am still getting the whole document tree, - copy of the whole document.
What am i doing wrong? What functions should i use for this kind of task? xmldom.clonenode?
Could you recommend any good description of the xmldom package?
Thanks,
Roman

If you are using an FI entry F-43 to generate invoice this can be done by giving the same invoice ref. in the Inv. Ref. field for two vendors. This is manual
Document Split will split the document between two profit center and not between vendors.

How to split one scene in two in iMovie HD 06

Hi there, is iMovie HD 06 able to split one scene in two? I am trying to insert slow motion for part of the scene but not the whole. Can I do that? Are there alternatives?

Easy. Select the clip you want to split, therefore highlighting it, move the playhead to the point that you want to start your slo mo, go up to EDIT and select Split Video at Playhead. Repeat for the end point of that slo mo bit and you are left with three separate clips.

How can I make biscuit and then break it to two parts and have some small pieces?

Hello there,
please tell me ..
How can I make biscuit in AE and then break it to two parts and have some small pieces fall down ?
any help would be so much appreciated ..

Strictly inside AE you have two options. Shatter using custom shatter maps and masking + particle effects. Neither would be as conviceing as Dave's solution.
If you have access to a 3D app (blender is free) you can do it there.
Here's a 2 minute project in AE with a stock image:
with a shot of the broken buscuit top animated to fit the split it might be kind of convincing.
Here's the CS6 AEP project file for you to play with. Take a look at all of the elements to see how this worked by selecting all layers and then pressing the u key twice to see everything I changed.

Write a progarm to test two parts at the same time

Hi:
I need to write a program in LabView that is capable of testing two parts at the same time.
Explanation:
I star the test on a unit, once all the electrical test is done move that unit to the pressure test without loosing the current test information and continue the test of the unit thewn generate a serial number only if it passes all the test. Then while the previous unit is going thru the pressure test star testing another unit for the elecrical test and so on.
I am using LabView 2012

From what you have described, I agree with what has been answered above. TestStand is specifically designed for. If you would like to provide more information about your application we could give you a more detailed response. For more information about TestStand follow this link
www.ni.com/teststand
Ryan
Ryan
Applications Engineer
National Instruments

Split a shape in two parts?

Similar Messages

Maybe you are looking for