Split the file in the batches of 1000 records

Hi,
I need to read a fixed length file from SAP system and then have to send the file which is combination of a huge number of records (e.g 100000) in the batches of 1000 records each to the target system.The target system which is a third party has a constraint of accepting only 1000 records in a file.
What is the best approach we may use here to split the file in the batches of 1000 records and then send the file to the target.
Kindly suggest.
Thank You.
Regards,
Indu Khurana.

The adapter will will take care this and split the input file (message) into smaller message batches (set to the number of records defined by you, say 1000). Each of these smaller batches will be processed as per your design and configuration. For example a straight through sender and receiver will have the sender splitting the input file into batches of 1000 messages which will be delivered to your receiver. You could also add a timestamp or the like to stop the file being overwritten at the destination.
Regards,
Mike

Similar Messages

How to see the file at the application server

HI TO ALL SDNERS ,
                             THIS IS MY CODE WHERE TO CHECK THE DOWNLOADED FILE AT THE APPLICATION SERVER.IN TCODE AL11 I HAVE SEEN THERE IS NO FILE GETTING CREATED.WHEN TRANSFERRING THE SY-SUBRC VALUE IS ZERO.
Program Name        : ZME11_BDC.
Title               : PURCHASE INFORMATION RECORD LOAD PROGRAM
Program Objective   : THIS PROGRAM READS IN THE PURCHASE
                      INFORMATION FILE. IT CREATES A BDC SESSION TO
                      USE TO LOAD THE PURCHASE INFORMATION RECORDS
                      INTO SAP using the ME11 Transaction.
REPORT ZME11_BDC no standard page heading MESSAGE-ID ZHNC line-size 55.
            constants declaration
constants: c_x value 'X',
           c_sess type apqi-groupid value 'zcustomer',
           c_xd01 type tstc-tcode value 'ME11'.
              DECLARING VARIABLES
DATA: V_MSG(255),
      V_ERREC TYPE I,"NO OF FAILED RECORDS
      V_LINES."NO OF RECORDS
       FLAG DECLARATIONS
DATA: FG_DATA_EXIST VALUE 'X',"CHECK FOR DATA
      FG_SESSION_OPEN VALUE ''.
      STRUCTURES AND INTERNAL TABLE DECLARATIONS
TYPES :BEGIN OF TY_PIR,
         LIFNR TYPE EINA-LIFNR,
         MATNR TYPE EINA-MATNR,
         EKORG TYPE EINE-EKORG,
         WERKS TYPE EINE-WERKS,
         VERKF TYPE EINA-VERKF,"sales person
         TELF1 TYPE EINA-TELF1,"telephone
         URZLA TYPE EINA-URZLA,"country
         REGIO TYPE EINA-REGIO,"region
         APLFZ(5),"plan deleivery time
         EKGRP TYPE EINE-EKGRP,"purchase group
         NORBM(13),
         NETPR(13),
     END OF TY_PIR.
DATA : IT_PIR TYPE TABLE OF TY_PIR,
       WA_PIR LIKE LINE OF IT_PIR.
DATA: BEGIN OF IT_BDCDATA.
INCLUDE STRUCTURE BDCDATA.
DATA END OF IT_BDCDATA.
DATA : BEGIN OF IT_BDCMSG.
INCLUDE STRUCTURE BDCMSGCOLL.
DATA END OF IT_BDCMSG.
                  SELECTION SCREEN
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETER : FNAME TYPE RLGRAP-FILENAME.
SELECTION-SCREEN END OF BLOCK B1.
                       AT SELECTION ON VALUE REQUEST
AT SELECTION-SCREEN ON VALUE-REQUEST FOR FNAME.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
   PROGRAM_NAME        = SYST-CPROG
   DYNPRO_NUMBER       = SYST-DYNNR
   FIELD_NAME          = ' '
IMPORTING
   FILE_NAME           = FNAME.
                         START OF SELECTION
START-OF-SELECTION.
PERFORM F_GET_DATA USING FNAME
                   CHANGING IT_PIR.
PERFORM F_GENERATE_DATASET USING FNAME
                           CHANGING IT_PIR WA_PIR.
*&      Form F_GET_DATA
      text
     -->P_V_FNAME text
     <--P_IT_PIR text
FORM F_GET_DATA USING    P_FNAME LIKE FNAME
                 CHANGING P_IT_PIR LIKE IT_PIR.
DATA: LV_FILE TYPE STRING.
LV_FILE = FNAME.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = LV_FILE
   FILETYPE                      = 'DAT'
HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = P_IT_PIR
EXCEPTIONS
   FILE_OPEN_ERROR               = 1
   FILE_READ_ERROR               = 2
   NO_BATCH                      = 3
   GUI_REFUSE_FILETRANSFER       = 4
   INVALID_TYPE                  = 5
   NO_AUTHORITY                  = 6
   UNKNOWN_ERROR                 = 7
   BAD_DATA_FORMAT               = 8
   HEADER_NOT_ALLOWED            = 9
   SEPARATOR_NOT_ALLOWED         = 10
   HEADER_TOO_LONG               = 11
   UNKNOWN_DP_ERROR              = 12
   ACCESS_DENIED                 = 13
   DP_OUT_OF_MEMORY              = 14
   DISK_FULL                     = 15
   DP_TIMEOUT                    = 16
   OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
IF P_IT_PIR IS INITIAL.
FG_DATA_EXIST = ''.
ENDIF.
ENDFORM.                    " F_GET_DATA
*&      Form F_GENERATE_DATASET
      text
     -->P_V_FNAME text
     <--P_IT_PIR text
FORM F_GENERATE_DATASET USING    P_V_FNAME LIKE FNAME
                         CHANGING P_IT_PIR LIKE IT_PIR
                                  P_WA_PIR LIKE WA_PIR.
MESSAGE I001(ZHNC).
*OPENING FILE AT THE APPLICATION SERVER FOR WRITING
OPEN DATASET FNAME FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
IF SY-SUBRC EQ 0.
MESSAGE I002(ZHNC).
LOOP AT P_IT_PIR INTO P_WA_PIR.
SPLIT P_WA_PIR AT '*' INTO P_WA_PIR-LIFNR
                           P_WA_PIR-MATNR
                           P_WA_PIR-EKORG
                           P_WA_PIR-WERKS
                           P_WA_PIR-VERKF
                           P_WA_PIR-TELF1
                           P_WA_PIR-URZLA
                           P_WA_PIR-REGIO
                           P_WA_PIR-APLFZ
                           P_WA_PIR-EKGRP
                           P_WA_PIR-NORBM.
*TRANSFER THE FILE FROM INTERNAL TABLE TO APPLICATION SERVER
MESSAGE I003(ZHNC).
TRANSFER P_WA_PIR TO FNAME.
ENDLOOP.
*CLOSING THE FILE AT THE APPLICATION SERVER
CLOSE DATASET FNAME.
ENDIF.

Hello,
I made a similar program. You can have a look at it.
*&      Form write_to_app_server
      text
--> p1        text
<-- p2        text
FORM write_to_app_server.
To get filename
PERFORM get_filename.
To write into the application server
OPEN DATASET g_filename_with_path FOR OUTPUT IN TEXT MODE.
IF sy-subrc = 0.
    LOOP AT <l_table> INTO <l_line>.
      TRANSFER <l_line> TO g_filename_with_path.
    ENDLOOP.
    CLOSE DATASET g_filename_with_path.
ELSE.
    CLOSE DATASET g_filename_with_path.
ENDIF.
To send mail
PERFORM send_mail.
ENDFORM.                    " write_to_app_server
*&      Form get_filename
      text
--> p1        text
<-- p2        text
FORM get_filename.
DATA : l_log_path TYPE filepath-pathintern
                      VALUE 'Y28M_DOWNLOADS_BACKGROUND' .
CALL FUNCTION 'FILE_GET_NAME_USING_PATH'
       EXPORTING
            client                     = sy-mandt
            logical_path               = l_log_path
            operating_system           = sy-opsys
            file_name                  = p_fname
       IMPORTING
            file_name_with_path        = g_filename_with_path
       EXCEPTIONS
            path_not_found             = 1
            missing_parameter          = 2
            operating_system_not_found = 3
            file_system_not_found      = 4
            OTHERS                     = 5.
IF sy-subrc <> 0.
    MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
            WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.                    " get_filename
You may find it useful.
Regards,
Karuna.

How can i get also the files in the root directory and how can i for testing add items of IEnumerable FTPListDetail to List string ?

What i get is only the directories and files that in other nodes. But i have also files on the root directory and i never
get them. This is a screenshot of my program after i got the content of my ftp. I'm using treeView to display my ftp content:
You can see two directories from the root but no files on the root it self. And in my ftp server host i have files in the root direcory.
This is the method i'm using to get the directory listing:
public IEnumerable<FTPListDetail> GetDirectoryListing(string rootUri)
var CurrentRemoteDirectory = rootUri;
var result = new StringBuilder();
var request = GetWebRequest(WebRequestMethods.Ftp.ListDirectoryDetails, CurrentRemoteDirectory);
using (var response = request.GetResponse())
using (var reader = new StreamReader(response.GetResponseStream()))
string line = reader.ReadLine();
while (line != null)
result.Append(line);
result.Append("\n");
line = reader.ReadLine();
if (string.IsNullOrEmpty(result.ToString()))
return new List<FTPListDetail>();
result.Remove(result.ToString().LastIndexOf("\n"), 1);
var results = result.ToString().Split('\n');
string regex =
@"^" + //# Start of line
@"(?<dir>[\-ld])" + //# File size
@"(?<permission>[\-rwx]{9})" + //# Whitespace \n
@"\s+" + //# Whitespace \n
@"(?<filecode>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<owner>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<group>\w+)" +
@"\s+" + //# Whitespace \n
@"(?<size>\d+)" +
@"\s+" + //# Whitespace \n
@"(?<month>\w{3})" + //# Month (3 letters) \n
@"\s+" + //# Whitespace \n
@"(?<day>\d{1,2})" + //# Day (1 or 2 digits) \n
@"\s+" + //# Whitespace \n
@"(?<timeyear>[\d:]{4,5})" + //# Time or year \n
@"\s+" + //# Whitespace \n
@"(?<filename>(.*))" + //# Filename \n
@"$"; //# End of line
var myresult = new List<FTPListDetail>();
foreach (var parsed in results)
var split = new Regex(regex)
.Match(parsed);
var dir = split.Groups["dir"].ToString();
var permission = split.Groups["permission"].ToString();
var filecode = split.Groups["filecode"].ToString();
var owner = split.Groups["owner"].ToString();
var group = split.Groups["group"].ToString();
var filename = split.Groups["filename"].ToString();
var size = split.Groups["size"].Length;
myresult.Add(new FTPListDetail()
Dir = dir,
Filecode = filecode,
Group = group,
FullPath = CurrentRemoteDirectory + "/" + filename,
Name = filename,
Owner = owner,
Permission = permission,
return myresult;
And then this method to loop over and listing :
private int total_dirs;
private int searched_until_now_dirs;
private int max_percentage;
private TreeNode directories_real_time;
private string SummaryText;
private TreeNode CreateDirectoryNode(string path, string name , int recursive_levl )
var directoryNode = new TreeNode(name);
var directoryListing = GetDirectoryListing(path);
var directories = directoryListing.Where(d => d.IsDirectory);
var files = directoryListing.Where(d => !d.IsDirectory);
total_dirs += directories.Count<FTPListDetail>();
searched_until_now_dirs++;
int percentage = 0;
foreach (var dir in directories)
directoryNode.Nodes.Add(CreateDirectoryNode(dir.FullPath, dir.Name, recursive_levl+1));
if (recursive_levl == 1)
TreeNode temp_tn = (TreeNode)directoryNode.Clone();
this.BeginInvoke(new MethodInvoker( delegate
UpdateList(temp_tn);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
percentage = (searched_until_now_dirs * 100) / total_dirs;
if (percentage > max_percentage)
SummaryText = String.Format("Searched dirs {0} / Total dirs {1}", searched_until_now_dirs, total_dirs);
max_percentage = percentage;
backgroundWorker1.ReportProgress(percentage, SummaryText);
foreach (var file in files)
TreeNode file_tree_node = new TreeNode(file.Name);
file_tree_node.Tag = "file" ;
directoryNode.Nodes.Add(file_tree_node);
numberOfFiles.Add(file.FullPath);
return directoryNode;
Then updating the treeView:
DateTime last_update;
private void UpdateList(TreeNode tn_rt)
TimeSpan ts = DateTime.Now - last_update;
if (ts.TotalMilliseconds > 200)
last_update = DateTime.Now;
treeViewMS1.BeginUpdate();
treeViewMS1.Nodes.Clear();
treeViewMS1.Nodes.Add(tn_rt);
ExpandToLevel(treeViewMS1.Nodes, 1);
treeViewMS1.EndUpdate();
And inside a backgroundworker do work how i'm using it:
var root = Convert.ToString(e.Argument);
var dirNode = CreateDirectoryNode(root, "root", 1);
e.Result = dirNode;
And last the FTPListDetail class:
public class FTPListDetail
public bool IsDirectory
get
return !string.IsNullOrWhiteSpace(Dir) && Dir.ToLower().Equals("d");
internal string Dir { get; set; }
public string Permission { get; set; }
public string Filecode { get; set; }
public string Owner { get; set; }
public string Group { get; set; }
public string Name { get; set; }
public string FullPath { get; set; }
Now the main problem is that when i list the files and directories and display them in the treeView it dosen't get/display
the files in the root directory. Only in the sub nodes.
I will see the files inside hello and stats but i need also to see the files in the root directory.
1. How can i get and list/display the files of the root directory ?
2. For the test i tried to add to a List<string> the items in var files to see if i get the root files at all.
This is what i tried in the CreateDirectoryNode before it i added:
private List<string> testfiles = new List<string>();
Then after var files i did:
testfiles.Add(files.ToList()
But this is wrong. I just wanted to see in testfiles what items i'm getting in var files in the end of the process.
Both var files and directoryListing are IEnumerable<FTPListDetail> type.
The most important is to make the number 1 i mentioned and then to do number 2.

Risa no.
What i mean is this. This is a screenshot of my ftp server at my host(ipage.com).
Now this is a screenshot of my program and you can see that in my program i have only the directories hello stats test but i don't have the files in the root: htaccess.config swp txt 1.txt 2.png....all this files i don't have it on my treeView.
What i want it to be is that on my program on the treeView i will also display the files like in my ftp server.
I see in my program only the directories and the files in the directories but i don't see the files on the root directory/node.
I need it to be like in my ftp server i need to see in my program the htaccess 1.txt 2.png and so on.
So what i wrote in my main question is that in the var files i see this files of the root directory i just don't know to add and display them in my treeView(my treeView is treeViewMS1).
I know i checked in my program in the method CreateDirectoryNode i see in the first iteration of the recursive that var files contain this root files i just dont know how to add and display them in my treeView.
On the next iterations when it does the recursive it's adding the directories hello stats test and the files in this directories but i need it to first add the root files.

Multiple drag emails from Mail to a finder window and for it to name the files as the subject heading

Hi
I have been using Mac's now for about 10 years and this is my first problem.
I have recently moved into an office that use PC's with a Windows server.
I have set up the network to transfer files and view the windows server and it works fine.
I have a problem in that my colleagues on PC need to be able to view my emails which I send and receive using Mail. They therefore need to have logical title names and the date sent and ideally who to or from. I view them and archive them using Mail which is fine for me.
I understand about the archiving and copying of mailboxes but this gives every email the un-fathomable title name 9944847 etc.
I can get round the problem by dragging and dropping every email I send and receive individually and it will automatically give it a more logical title of the subject heading however the date is when it was dragged not when sent. This is a pain if I am away or forget to save an email for a day or two and then the date is inconsistent.
Is there a way to batch copy emails from Mail to a finder window and for it to name the files as the subject heading or to archive the files in a similar way so they retain the detailed information my colleagues require.
And no I can not get to all change to Mac and I don't really fancy using Outlook, Entourage or Parallels.
Please help.
Toby

Quit Mail. Force quit if necessary.
Back up all data. That means you know you can restore the Mail database, no matter what happens.
Triple-click the text on the line below to select it:
~/Library/Mail/V2/MailData/Envelope Index
Copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens (command-V), then press return.
A Finder window will open with a file selected. Move the selected file to the Desktop, leaving the window open. Other files in the folder may have names that begin with "Envelope Index". Move those files, if any, to the Trash. Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is corrupt and that Mail has to quit. Click OK.
Test. If Mail now works as expected, you can delete the file you moved to the Desktop. If you get a warning that the file is in use when you try to empty the Trash, log out and log back in.

I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

I need to convert PDF file to Word Document, so it can be edited. But the recognizing text options do not have the language that I need. How I can convert the file in the desired of me language?

The application Acrobat provides no language translation capability.
If you localize the language for OS, MS Office applications, Acrobat, etc to the desired language try again.
Alternative: transfer a copy of content into a web based translation service (Bing or Google provides a free service).
Transfer the output into a word processing program that is localized to the appropriate language.
Do cleanup.
Be well...

I have an external drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. Which format do you think I should use? Will either one cause damage to the files on the hard drive?

I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
My little memory stick uses MS-DOS and it works on both mac and windows.
Please can you just tell me a little about each and suggest which one to use.
I know how to change it once you tell me so don't waste your time writing about changing it.

Will any of them cause damage to the files on the hard drive?
WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS.

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it.

When I go to my downloads folder on my dock and click the file all the content shows up but as soon as I go to open it in the finder, I get a blank window. Has anyone else had this problem, if so, How do you fix it. I also cant delete anything from this folder because of it. Any help would be greatly appreciated.

Hey Allen,
I am having the same issue here in September. How did yor situation get resolved. My iPad Siri works great. My iPhone 5 Siri has been out of comission (OOC) for almost a month and I am beginning to get a little frustrated since Siri works so well in July....ANY assistance would be highly appreciated... Thanx

HT2518 How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

How do I transfer music from an external hard drive to my itunes on my mac? I have put the files into the itunes media, but they are not showing up in iTunes!

Hi, did you try iTunes>File>Import?

HT203200 Cannot delete the file from the itunes folder

I cannont delete the file from the itunes folder because it tells me I need permission to do so. I am the admin person for the laptop plus I have checked my permissions under the security tab in the files properties. How do I delete this file to start again? It downloaded 1.2GB of the file before the error message appeared, so its paid for and all but not looking like I'll get to watch it before the time runs out on the movie being available for me to watch. :-(

Try deleting the file without iTunes running.
When you next open iTunes it should then be marked as a missing file and you should be able to delete the entry from iTunes.
Hope this works
Regards,
Colin R.

Delete the file from the external hard drive

deleted adobe reader 10, delete the file from the external hard drive. how to restore

What is your operating system & version?
How did you "delete" Adobe Reader?
What "file" did you delete?
What do you want to restore?

PI is not able to pick the file from the FTP folder

This is the FILE TO IDOC scenario. We have configured the file adapter. But its not able to pick the file from the specified directory. We have tried changing the transfer mode from Binary to Txt & also we have tried to put advance selection for source file but it didn't work. Its throwing the below error:
PI Adapter Log:
An error occurred while connecting to the FTP server '10.130.150.21:8529'. The FTP server returned the following error message: 'com.sap.aii.adapter.file.ftp.FTPEx: 451 Unexpected reply coderequested action aborted: local error in processing'. For details, contact your FTP server vendor.
Also we have contacted the FTP team & they told that PI is sending an unsupported command. So instead of taking the file TLOG.txt, its treating this file name a s a directory. Please find the logs from FTP end below:
FTP Log:
(207197)2/5/2013 14:48:25 PM - sysisappi (63.130.82.16)> 230 Logged on
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> FEAT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211-Features:
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MDTM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> REST STREAM
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> SIZE
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLST type*;size*;modify*;
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MLSD
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH SSL
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> AUTH TLS
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> UTF8
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CLNT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> MFMT
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 211 End
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PBSZ 0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 PBSZ=0
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> PROT P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 200 Protection level set to P
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD /Qas
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas" is current directory.
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> CWD SAP_ORION
(207197)2/5/2013 14:48:26 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD Inbound
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD IRIIN04
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 250 CWD successful. "/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 221 Goodbye
It should list *TLOG.txt* but instead it is trying to get into a directory named *TLOG.txt*. same for other interface.
So me & my team is struggling for last couple of days to fix this issue.Please share your suggestion

Hi Sisir
The screen shot of your config doesn't seem to correspond to the FTP log. I say this because the * is dropped from file name pattern "*TLOG.txt" (comparing your config and the FTP log). Can you share an updated FTP log?
Sisir Das wrote:
"/Qas/SAP_ORION/Inbound/IRIIN04" is current directory.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> CWD TLOG.txt
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> 550 CWD failed. "/Qas/SAP_ORION/Inbound/IRIIN04/TLOG.txt": directory not found.
(207197)2/5/2013 14:48:27 PM - sysisappi (63.130.82.16)> QUIT
Also, like Rajesh suggested, have you tried to manually check permissions by logging in, traversing the directory, and getting the file?
By the way, we always use backslash \ instead of forward slash in our configs. Not sure this would make any difference for you though. Also, I don't normally use a trailing \ at the end of the source directory path.

I am using the desktop screensaver and a file from dropbox for photos. Does the list of screen savers actually use the file, or just link to it. If I delete the file from the dropbox, will the screen saver be lost?

Using the desktop slideshow, I have added a file from dropbox for the slideshow. If I delete the dropbox file, does that delete the file from the list on the slideshow? Do I need to leave the file on the computer itself rather than in the dropbox and then delete it from the dropbox?

If you are going to delete the file from Dropbox, you will need the file on your computer.
You will probably need to put the file in Library/Screen Savers

I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

I've recently been given a macbook pro from uni, with lots of adobe software on. I want to pair it with my iMac which has music etc and is it possible to get the software to the imac and the files to the macbook?Giving me the best of both :-)

You would need the original installation disks or files for the Adobe software to get it onto your iMac, and having it on two computers may not be allowed by your university's licensing. Talk to whoever issued the MacBook.
As to the music, just copy it over to the MacBook, either via Home Sharing, file sharing, or an external storage medium (hard drive, USB flash drive, etc.).
Regards.

I am trying to move my Elements 9 catalog and files from Windows 7 to Mac OSX Yosemite and can't connect the files on the Mac.

When I try to connect the files to the catalog on the Mac, many (~9000 out of ~12000) files show as can not reconnect. Elements finds "similar" files (actually the files I want) but says they are not the same file. I noticed that many of them have the time parameter different in the file compared to the catalog. If I go ahead and say reconnect anyway, I get another error indicating the the data has been changed by two different sources. If offers the choice of overwriting the file data with info from the catalog (which loses the EXIF data in the file) or says leave the file alone (which loses the keyword metadata from the catalog). Is there any way to get Elements to connect all of these files while retaining all of the EXIF and the keyword metadata without having to re-edit or re-import each of these files? My ultimate aim is to then move all of these photos into the current version of Lightroom on the Mac.

You won't like this response, but there is no way to simply move any Adobe software installation from one system to another. In part, this has to do with the registration/activation infrastructure that Adobe uses. FWIW, Adobe isn't the only software vendor for which you can't simply move software from one system to another via various migration tools.
You must totally uninstall from the first system including product deactivation and then install on the new system and reactivate.
In terms of “fixing” your current system, I would recommend totally uninstalling the software (and deactivating in the process), reboot, and then reinstall from scratch.
- Dov

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

How can I get a pdf. to open in Safari, all i'm getting is a new window with a black, blank page, instead of the pdf., and I don't want to save the file to the desktop, Safari didn't use to do that, and I don't have Adobe in the internet plug in folder.

Hi
Please take a look to this thread Re: Can I refresh the browser rather than open a new tab?

Split the file in the batches of 1000 records

Similar Messages

Maybe you are looking for