Splitting up the Spring front controller servlet into more than one file

In a multi-developer environment, it's obviously a bit of a pain to all use the same front controller xml file for mapping requests. Therefore does anyone know of a way we could split this into many files, for example one for each logically distinct application?
Many thanks

Hi,
What are these files did you want to delete? As I know, the trusted installer group owns many system files and will deny you access to move or delete. incorrect deletion of these files will cause serious problem. If you want to delete these files, you can
take the owner of these files and guarantee administrator permissions with icacls command, it can reduce amount of your work.
How to Handle NTFS Folder Permissions, Security Descriptors and ACLs in PowerShell
http://blogs.technet.com/b/josebda/archive/2010/11/12/how-to-handle-ntfs-folder-permissions-security-descriptors-and-acls-in-powershell.aspx
And according to your description, do you want to convert an internal hard drive to external? if so, how did you perform this action? here is an article you can refer to:
http://www.computershopper.com/peripherals/howto/build-your-own-external-hard-drive
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Similar Messages

  • How can i use the same front panel graph in more than one events in an event structure?

    i want to display the signals from my sensorDAQ in a graph.but i have more than one event in the event structure to acquire the signal and display it in the graph.the first event is to acquire the threshold signals and its displayed in the graph as a feedback.after the first event is executed, i will call the second event,where the further signals are acuired and compared with the threshold signals from the event 1.my question is how can i use the same front panel control in more than two events in the event structure?please answer me i'm stuck.
    Solved!
    Go to Solution.

    Hi,
    I have attached here an example of doing the same using shift registers and local variables. Take a look. Shift register is always a better option than local variables.
    Regards,
    Nitzz
    (Give kudos to good answers, Mark it as a solution if your problem is Solved) 
    Attachments:
    Graph and shift registers.vi ‏12 KB
    graph and local variables.vi ‏12 KB

  • Split current catalog into more than one?

    I have entirely too many pictures in one PSE6 catalog.  Can I split this current catalog into more than one catalog?  If so, what is the easiest way to do so?  Thank you.

    How many photos do you have?  PSE can handle a very large number, if you have then well organised.

  • How to burn more than one file on the same dvd?

    I would like to burn more than one file in to the same dvd. It seems to me that using Finder I can burn only a file. There is some alternative command? Thank's

    Select all the item to burn... right click...
    Or
    Place all items into a folder and burn the folder to the disc.
    Or
    Make a Burn Folder in the Finder (place items into the folder) and burn from there to a disc.

  • How to insert into more than one table at a time also..

    hi,
    i am a newbee.
    how to insert into more than one table at a time
    also
    how to get a autoincremented value of an id say transactionid for a particular accountid.
    pls assume table as
    transactionid accountid
    101 50
    102 30
    103 50
    104 35
    i want 102 for accountid 30 and 103 for accountid 50.
    thank u

    @blushadow,
    You can only insert into one table at a time. Take a look here :
    Re: insert into 2 tables
    @Raja,
    I want how to extract the last incremented value not to insert.Also, I don't understand your thread title... which was "how to insert into more than one table at a time also.. "
    Insert, extract... ? Can you clarify your job ?
    Nicolas.

  • Put a song into more than one genre

    I am trying to organize my music and would like to put a song into more than one genre.  So if I put a song into the categories "acoustic"  and "blues" I would like for that song to come up with I search acoustic songs as well as when I search Blues songs.  How can I do this?

    Genre= "Acoustic Blues"
    Search for "Genre contains" as opposed to "Genre IS".

  • How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    How do I turn off the feature that allows the duplication of App downloads to more than one phone? As in my wife downloads an app and I get a dulpicate download on my phone.

    To disable that feature it will depend on whether or not you sync everything in the cloud using Apple's iCloud, OR if you both use the same desktop/laptop computer with iTunes. Here is a link to the Apple support page in regards to the automatic download feature included with your iPhone and corresponding softwares such as iTunes.
    http://support.apple.com/kb/ht4539
    Follow those instructions and it will all be taken care of.

  • My mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    my mac will not copy more than one file at a time and gets locked up if the file is too large, my mac will not copy more than one file at a time and gets locked up if the file is too large

    So now that you have repeated the same thing three times that doesn't make things any clearer at all.
    You are copying files from where to where?
    How are you attempting to copy files, software or click and drag?
    Any other detail would be helpful.
    Allan

  • The file is not readable, when more than one file open

    Get this error when I try to open more than one file. Happens on different files, but especially on jobs that have side panels on packaging. The files have placed .psd images. Happens on different computers (10.6 & 10.8.2).
    Can get the file open usually by closing the othere open file, but then is hard to copy and paste between files. Sometimes I get this when trying to open one file, but restarting Illustrator usually fixes this.
    Have tried working directly from the hard drive, and still get this problem. Does to follow an exact pattern, can try to open file a, then b one day thsi will work another will fail. Seems like something is corrupting the memory, and usually happens with more complex files. Happens in CS5 & CS6, though I mostly work in CS5.

    Anyone else getting this error?

  • I accidently closed my window with all my app tabs, now the only window that opens was a 2nd one I had open. How do I get back all my app tabs from the previous window, and why didn't it give me the usual warning you are closing more than one tab?

    I accidently closed the window with all my frequently used app tabs, now the only window that opens was an extra one I had opened. How do I get back all my app tabs from the previous window, and why didn't it give me the usual warning you are closing more than one tab? edit
    Details

    Then the (App) tabs from that window are lost unless you can restore an older copy of the sessionstore.js file (Time Machine?) that has that lost window.
    *http://kb.mozillazine.org/sessionstore.js

  • How do I log into more than one email account and view at the same time?

    In the past, I could log in to hotmail.com and open and view more than one email account in firefox. I must have closed something, so now I can't do that?
    HELP???

    Hi Shasanka,
    ofcourse it's possible to control more than one instrument at a time.
    You should use the VISA routines to access all your devices. Every device get it's 'address' as 'VISA resource name'. This resource name contains information on the used bussystem and the (internal) device address (i.e. GPIB devices have an address number).
    So I suggest to read the manual and to look at the examples that come with LabView!
    And (from your question) it seems you should take the 3 or 6 hour seminar as well! (Look at www.ni.com -> academics.)
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • Can the iPhone 4 with iOS5, have more than one custom voicemail greeting?

    Is it possible to put more than one custom greeting on the iPhone 4 with iOS 5?  I sometimes would like certain people to know where I am or what I'm doing so they may take the opportunity to join me without me answering the phone each time it rings when I'm hosting a seminar or teaching a class. I would like to record a couple of responses that I could pick from, but don't know if that is possible.  Thanks!

    iPhone and carriers do not natively support this. You have to use a third party application from the App Store to take advantage of this feature, which is possible via an application such as YouMail. It's free in the app store. I'm sure there are others like that available as well.

  • Can the new numbers export PDF as more than one page?

    I just upgraded to the new version of Numbers for OS X Mavericks and it seems I can not
    see my document as different pages or even export a PDF as several pages.
    Thanks,
    Alex Neuman

    Hi Alex,
    It took me a while to get my head around the difference between Export to PDF (everything on one page) and Print, where we can 'Print to PDF'.
    Do this:
    Menu > File > Print...
    You will see Print Preview. At the bottom of the panel on the right,
    click on Print. It won't print yet, but will take you here:
    Now we see Page 1 of 4 .
    Click on PDF to go here:
    Choose Save as PDF to a folder of your choice (mine is called Desktop Temp). In Finder, open that folder then double click on the PDF to open in Preview.
    Then Print from Preview.
    Phew.
    Regards,
    Ian.

  • How to Start the Particualr Listener if we have more than one listener

    Hi,
    How to start a listener with a particular Listener name. If we have more than listener defined within the Listener.Ora file.

    from a command prompt,
    lsnrctl start <listenername>

  • HT1473 Often times when I copy a CD into my library it breaks the CD into more than one Album, all with the same name but with only a few of the songs on each. This happens whenever the CD has music with more than one artists...like maybe duets.

    Often times when I copy a CD into my library it will break my CD into multiple albums in my library, each with only a few songs.
    Usually this is because there might be songs where the artists has other artists in the song.
    How can I compile all of the different albums (all with the same name by the way) back into one as was the original disc?

    Generally all you need to do is fill in an appropriate Album Artist. For more details see my article on Grouping Tracks Into Albums, in particular the topic One album, too many covers.
    tt2

Maybe you are looking for

  • How do I reset my security questions I forgot answers to?

    New to iPad. We had an account for my kids to use iTunes under my email. Now I have an iPad and I can log in with my user name and password but when try to purchase apps it wants to verify with questions I can't remember my answers. How do I reset?

  • How to make a downloadable report of application log file.

    Hi Every One, i am new to this ABAP environment, I have application logs in my system, i need to generate the reports based on my filter condition and i need to download them as file/report, For example; I need a Application Log report for: only Part

  • Error in activating Transformation

    Hi Gurus We are using BI 7.0 and when we use amonut as a data type for one of the key figure ( Revenue )  , I am getting an error when I am trying to activate the transformation. Do you know which OSS note/ Support pack we have to apply? Thanks

  • Line item deleted in PR

    Hi, How to find the user who has deleted all the line items in PR. Regards, Sheetal

  • When will Tamron 16-300mm for Sony be supported for lens correction?

    In the list of supported lenses for LR I can only find Tamron 16-300mm for Nikon and Canon but not for Sony. It is the same lens, so why isn't it supported yet? And when will it be? Thanks!