Spool Error: "Error in spool C call: Error from TemSe"
Hi All,
We are getting the above error in F110 transaction. Even though the line items are clearing. But, cheque numbers are not updating and spool also not creating.
Please suggest me, what i have to do for this.
Thanks in Advance,
Krishna.
Hi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K
Similar Messages
-
Smartform Printing : Error in spool C call: Error from TemSe
Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device ZEB10
Format ZTT Format
Doc. Category SMART
Recipient
Department
Deleted On 19.01.2011
Authorization
Output Attributes
No. of Copies 1
Priority 5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested 0
Processed 0 With Problem 0
With Error (Not Printed) 0
Storage Mode Print
TemSe Attributes
Object name SPOOL0000013836
Data type ????????????
Character set 0 -
> Character set of dev type = 1162
Number of parts 0
Record format
Size in bytes 0
Storage location
On seeing SP01
Spool no. Type Date Time Status Pages Title
13836 Smartforms(OTF) 11.01.2011 07:32 + 0 SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
ManasHi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K -
Calling Report from Form Error ORA-06508
Dear all,
I want migrate from Fom6i to Oracle Developer Suite 10g (10.1).
Folder Form = C:\APLIORA\IRS\FORM
Folder Report = C:\APLIORA\IRS\REPORT
I have modified file DEFAULT.ENV
FORMS_PATH=C:\APLIORA\IRS\FORM;C:\APLIORA\IRS\REPORT
i do not have problem call a form from form.
but when i call report from form show error ORA-06508 : PL/SQL : could not find program unit being called ; -6508
my procedure is
PROCEDURE Call_Report IS
list_id ParamList;
BEGIN
list_id := Get_Parameter_List('input_params');
IF NOT Id_Null(list_id) THEN
Destroy_Parameter_List(list_id);
END IF;
list_id := Create_Parameter_List('input_params');
Add_Parameter(list_id,'MAXIMIZE',TEXT_PARAMETER,'YES');
Add_Parameter(list_id,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES');
RP2RRO.RP2RRO_RUN_PRODUCT(REPORTS,'TESTREPORT.REP',SYNCHRONOUS,RUNTIME,FILESYSTEM,list_id,null);
END ;
Do I miss something ?
Can any one help ?
ThanksHi,
Thank you for your replay.
The problem have solved.
This my step :
1. Install Windows XP SP2 and Form 10.1.2.0.2 on new pc.
2. Install Jinit version 1.3.1.28.
3. Create report server
3. Compile form, report and pll
4. call report from from with this procedure :
PROCEDURE Call_Report (vFILENAME varchar2) IS
report_id Report_Object;
ReportServerJob VARCHAR2(100);
vc_rep_status VARCHAR2(100);
repsvr varchar2(21) := 'myserv';
userid VARCHAR2(100);
pass VARCHAR2(100);
Host VARCHAR2(100);
BEGIN
userid := Get_Application_Property(USERNAME) ;
pass := Get_Application_Property(PASSWORD) ;
Host := Get_Application_Property(CONNECT_STRING) ;
report_id:= find_report_object('REPORT');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_FILENAME,vFILENAME||'.jsp');
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(report_id,REPORT_SERVER,repsvr);
ReportServerJob:=run_report_object(report_id);
vc_rep_status := REPORT_OBJECT_STATUS(ReportServerJob);
WHILE vc_rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED', null)
LOOP
vc_rep_status:=REPORT_OBJECT_STATUS(ReportServerJob);
END LOOP;
IF vc_rep_status='FINISHED' THEN
WEB.SHOW_DOCUMENT('/reports/rwservlet?report='||vFILENAME||'.jsp'||'&userid='||userid||'/'||pass||'@'||Host||'&destype=CACHE&desformat=PDF¶mform=yes','_blank');
ELSE
message ('Report failed with error message '|| vc_rep_status);
END IF;
END;
Ok, but i have another strange error. I will post new thread.
Thank you and regards
Teguh S -
Need Help in expdp for resolving ORA-39127: unexpected error from call
Hi All,
My Environment is -------> Oracle 11g Database Release 1 On Windows 2003 Server SP2
Requirement is ------------> Data Pump Jobs to be completed without any error message.
I am tryring to take export data pump of a schema
Command Used --> expdp schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Export Log Show this details its completed with 2 error messages
Export: Release 11.1.0.6.0 - Production on Saturday, 23 April, 2011 13:31:10
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP option
FLASHBACK automatically enabled to preserve database integrity.
Starting "SYSTEM"."SYS_EXPORT_SCHEMA_01": system/******** schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 192 KB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',0,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',1,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980
. . exported "SCOTT"."DEPT" 5.945 KB 4 rows
. . exported "SCOTT"."EMP" 8.585 KB 14 rows
. . exported "SCOTT"."SALGRADE" 5.875 KB 5 rows
. . exported "SCOTT"."ACCTYPE_GL_MAS" 0 KB 0 rows
. . exported "SCOTT"."BONUS" 0 KB 0 rows
Master table "SYSTEM"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_SCHEMA_01 is:
D:\APP\ADMINISTRATOR\ADMIN\SIPDB\DPDUMP\SCORR.DMP
Job "SYSTEM"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 13:40:08
Please help me to resolve this issue.
Thank you,
ShanHi Shan,
I am getting very similar to yours
"ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found."
error message while creating OLAP Analytic Workspace with AWM.
I am creating workspace for the first time, actually following some tutorial to get some knowledge about OLAP)
I see you managed to solve you problem.
I wonder how I can get this MOS DOC 852794.1 - is it possible to get it without going to Metalink?
Thanks in advance for any help.
Regards,
SC -
XML Error while calling webservice from oracle function.
I am getting an error while I am trying to call webservice from oracle function. Any ideas? Thanks.
select get_new_string ('proxy:80', 'http://xxx/PatternVariations/SourceTest/WebMethods','Scott') from dual
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00225: end-element tag "H4" does not match start-element tag "P"
Error at line 9
ORA-06512: at "SYS.XMLTYPE", line 0
ORA-06512: at "DORSBP00.DEMO_SOAP", line 82
ORA-06512: at "DORSBP00.GET_NEW_STRING", line 11The error message implies that the web service is returning something that is not well formed xml. Can you verify what is being returned by the web service call
-
I am receiving this error message when trying to export pictures: 'Unable to Export": An internal error has occured: Win32 API error 2 ( "The system cannot find the file specified.") when calling ShellExecuteExW from AgWorkspace.shellExecute.// I have a HP ENVY Phoenix, fully loaded, 1 1/2 years old.
Nevermind I fixed it. Thank you.
-
Hi,
I am trying to export a Schema from 11.2.0.2 and getting the below error on export
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_RMGR_GROUP_EXPORT.GRANT_EXP(12425,1,...)
ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 154
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7049
ORA-39127: unexpected error from call to export_string :=
SYS.DBMS_RMGR_GROUP_EXPORT.GRANT_EXP(12424,1,...)
ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 154
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7049
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_RMGR_GROUP_EXPORT.GRANT_EXP(12423,1,...)
ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 154
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7049
ORA-39127: unexpected error from call to export_string := SYS.DBMS_SCHED_JOB_EXPORT.GRANT_EXP(2003412,1,...)
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SCHED_MAIN_EXPORT", line 2296
ORA-06512: at "SYS.DBMS_SCHED_JOB_EXPORT", line 52
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7049
I have searched the forum and found similar errors, but I am struggling to understand the cause and solution.
Forums seem to indicate it may be related to bug 4358907, Re: Datapump export/import object grants given by another user but not sure it is relevant as I can see a ORA-01031: insufficient privileges in this log.
Can you please advise?
ThanksPlease show your export command and read MOS ID: ORA-39127 using datapump exp [ID 451987.1 ]
and check below forms discussion:
https://forums.oracle.com/message/10237007 -
Hi all,
I am getting this erro on a Datapump Schema export on 11.2.0.2:
ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.GRANT_EXP(12425,1,...)
ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 154
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7049
ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.GRANT_EXP(12424,1,...)
ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 154
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7049
ORA-39127: unexpected error from call to export_string := SYS.DBMS_RMGR_GROUP_EXPORT.GRANT_EXP(12423,1,...)
ORA-06502: PL/SQL: numeric or value error: NULL index table key value
ORA-06512: at "SYS.DBMS_RMGR_GROUP_EXPORT", line 154
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7049
ORA-39127: unexpected error from call to export_string := SYS.DBMS_SCHED_JOB_EXPORT.GRANT_EXP(2003412,1,...)
ORA-01031: insufficient privileges
ORA-06512: at "SYS.DBMS_SCHED_MAIN_EXPORT", line 2296
ORA-06512: at "SYS.DBMS_SCHED_JOB_EXPORT", line 52
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7049
I believe it requires some specific privileges on DBMS_RMGR_GROUP_EXPORT.
I have found this below explanation Kevin's Blog: SYS.DBMS_RMGR_GROUP_EXPORT.GRANT_EXP but I am not a DBA, so I am not sure what grant needs to be modified.
It also complains of unsufficient privileges on DBMS_SCHED_JOB_EXPORT.GRANT_EXP, but I am not sure who needs what grant.
Could you please advise on how to resolve the issue?
ThanksHi,
Can anyone help if possible please?
Thanks -
'ORA-12571: TNS:packet writer failure' error while calling procedure from VC++
hi all,
i am writing stored procedures and calling these from vc++. I have one stored procedure in that all
in and out perameters are numeric. When i am calling these procedure i am able to get the values properly. But in another procedure one in perameter is varchar and one out perameter is varchar. When i am calling these procedure from vc++ the error i am getting is "ORA-12571: TNS:packet writer failure". I test my vc++ code on different computers but its giving the same errors. I think ora-12571 error is when i can't communicate with oracle. But other stored procedures(in and out perameters are numbers) and sql statements are running properly. Only these stored procedure which has in and out perameters as varchar is giving me the above said problem. My out perameter in this procedure strtax is of type varchar and the length 100. Is it the problem. Please suggest me how to over come this problem.
thanks in advance,
with regards
vali.Hi
We recently changed our load balancer to a new load balancer. we get this error only after the load balancer change.
When the error occurs, I could see ORA-12571 error message only in the application error log. The listener.log has only the following message about TNS 12502. It does not have any message about ORA -12571.
TNS-12502: TNS:listener received no CONNECT_DATA from client
12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2202)) * establish * AppName * 0
12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2203)) * establish * AppName * 0
12-MAR-2010 12:23:26 * (CONNECT_DATA=(SERVICE_NAME=AppName)(CID=(PROGRAM=c:\wind ows\system32\inetsrv\w3wp.exe)(HOST=WEB02)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=172.x.x.x.x)(PORT=2204)) * establish * AppName * 0
12-MAR-2010 12:24:09 * 12502
TNS-12502: TNS:listener received no CONNECT_DATA from client
Thanks
Ashok -
Getting an error from calling a store proc
this is my code calling a store proc. i got all oracle 8i
drivers imported.
package FMISBean;
import java.sql.*;
import oracle.jdbc.driver.*;
public class getrecordj
public static void main(String [] args){
//global variables
Connection conOrcl=null;
String ProjectID ="222700-";
CallableStatement C_TPRO_J=null;
ResultSet R_TPRO_J = null;
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
conOrcl=DriverManager.getConnection("jdbc:odbc:FMISORCL","FMIS_USER","FMIS123");
try{
String SQL ="{ ? = call getJrecord(?) }";
C_TPRO_J = conOrcl.prepareCall(SQL);
//assign the ? to the argument passed
C_TPRO_J.registerOutParameter(1,OracleTypes.CURSOR);
C_TPRO_J.setString(2,ProjectID);
//execute the query
C_TPRO_J.executeQuery();
R_TPRO_J = (ResultSet) C_TPRO_J.getObject(1);
//looping through the resultSet
while (R_TPRO_J.next()){
//create an instance of the class
// JavaBeans JItems = new JavaBeans();
// set it to the Bean
System.out.println(R_TPRO_J.getString(1));
System.out.println(R_TPRO_J.getString(2));
System.out.println(R_TPRO_J.getString(3));
System.out.println(R_TPRO_J.getString(4));
System.out.println(R_TPRO_J.getString(5));
System.out.println(R_TPRO_J.getString(6));
//JItems.setexistingLane(R_TPRO_J.getInt(3));
// JItems.setproposed_lane(R_TPRO_J.getInt(4));
// JItems.setcomnt(R_TPRO_J.getString(5));
// JItems.setcomntType(R_TPRO_J.getString(6));
//add the object to the vector
// V_itemsJ.addElement(JItems);
}catch(SQLException w){
System.out.println(w.getMessage());
}}catch(Exception S){
//returning the vector
// return V_itemsJ;
//closing bracets
the store proc works fine if i test it in sql plus but when i call it from the page i get a dos window error
[oracle][orant]:line 1, colunm 13
PLS: expression is of wrong type
line 1 , colunm 7
PL/SQL: statement ignored
any ideas please would help?Here are some examples to reference:
http://www.javaalmanac.com/egs/java.sql/CallFunction.html
http://www.javaalmanac.com/egs/java.sql/CallProcedure.html
DesQuite -
Error calling BLS from oracle database
Hi Experts,
We have a scenario in which we are calling BLS from oracle database using trigger. The call is made using the following URL:
http://<Host name>:50000/XMII/Runner?Transaction=<TRX_Path>&Material=MATNR&Pallet_id=PALLET&Plant=PLANT&Proc_order=PROC&Prodline=PROD&Quantity=QTY&Start_Date=DAT&Start_Time=TIM&Status=STAT&UOM=UOM1&User_name=USER&OutputParameter=*
This used to work fine in 11.5 but when we upgraded to 14.0 it is not working. We have maintained server details in \etc\host file.
We were getting error in file 'Error 1 Text.txt'. "A possible Cross-Frame Scripting attack has been prevented. Please contact your system administrator or refer to" this was the last error message. We checked this on SCN and based on the search results we have implemented SAP note 1651004 wherein setting in netweaver is required to be changed. After note was implemented we are getting another error text ('Error 2 Text.txt') "This will happen if the browser running the page tha". We tried a few ways but could not capture the full message coming.
Has anybody of faced similar problem? I would highly appreciate any hint which could help in solving this problem.
System Information:
NW 7.31 SP 10
Oracle 11.2.0.4
MII 14.0 SP5 patch 7
Regards,
DarshanHi Christian/Anushree,
I have now modified the URL by adding Illum login name and password:
http://<Host name>:50000/XMII/Runner?Transaction=<TRX_Path>&Material=MATNR&Pallet_id=PALLET&Plant=PLANT&Proc_order=PROC&…
When i run the url in browser it gives me the expected results but when i try to trigger it from Oracle i am still getting the error as below:
"<script>
var inPortalScript = false
var webpath = "/logon_ui_resources/"
</script>
<html>
<head>
<BASE target="_self">
<link rel=stylesheet href="/logon_ui_resources/css/ur/ur_ie5.css">
<title>User Management, SAP AG</title>
<script language="javascript">
var originWindowName=window.name;
window.name="logonAppPage";
function restoreWindow() {
try{
window.name=originWindowName;
} catch(ex){}
</script>
<script language="JavaScript">
function putFocus(formInst, elementInst) {
if (document.forms.length > 0) {
document.forms[formInst].elements[elementInst].focus();
function setValuesAutoCreation() {
var form = document.getElementById('logonForm');
form.j_username.value="";
form.j_password.value="";
form.automaticAccountCreation.value="true";
function submitForm() {
var form = document.getElementById('logonForm');
form.submit();
function clearEntries() {
document.logonForm.longUid.value="";
document.logonForm.password.value="";
function setFocusToFirstField() {
myform = document.logonForm;
try{
for (i=0; i<myform.length; i++) {
elem = myform.elements[i];
if (!elem.disabled) {
elemType = elem.type;
if (elemType=="text" || elemType=="password") {
if (!elem.readOnly) {
elem.focus();
break;
if (elemType=="select-one" || elemType=="select-multiple" || elemType=="checkbox" || elemType=="radio") {
elem.focus();
break;
} catch(ex){
function addTenantPrefix() {
return true;
</script>
</head>
<body class="urBdyStd" bgcolor="#F7F9FB" onLoad="setFocusToFirstField()" onUnload="restoreWindow()">
Thanks,
Darshan
<script language="JavaScript">
var blockPage = false;
</script>
<script language="JavaScript">
try {
if (top.document.domain != self.document.domain) {
blockPage = true;
} catch (error) {
// This will happen if the browser running the page tha" -
Error when call fmx from browser
I have used OAS 4.0.7 with yt40.dll upgraded, NT 4.0
SP4 and Developer 6.
I have configured application cartridge according Developer6
Server doc instructions.
When I call fmx from browser Netscape 4.6
(http://hostname/webforms?module=fmx_name) the error "Applet
oracle.forms.engine.Main class oracle.forms.engine.Main could not
be loaded".
OAS inserts in file \orant\ows\website40\log the message
"Parameter module is missing from URL and cartridge settings"
Can anybody help me please?.
Ruy Chicaco
nullHi Adnan
I have configured my apps similary the example in
\orant\tools\devdem60\web then it rans fine.
Thanks,
Ruy Chicaco.
Adnan Imtiaz (guest) wrote:
: Hi there,
: I'm facing the same problem myself...but mine goes into doing
: something & returns an "Internal Error" message in the
: browser....
: Try running the static HTML file from its directory & see
whether
: that even runs or not....
: Any helpp would be greatly appreciated.....
: Thanks.
: Ruy chicaco (guest) wrote:
: : I have used OAS 4.0.7 with yt40.dll upgraded, NT 4.0
: : SP4 and Developer 6.
: : I have configured application cartridge according Developer6
: : Server doc instructions.
: : When I call fmx from browser Netscape 4.6
: : (http://hostname/webforms?module=fmx_name) the error "Applet
: : oracle.forms.engine.Main class oracle.forms.engine.Main could
: not
: : be loaded".
: : OAS inserts in file \orant\ows\website40\log the message
: : "Parameter module is missing from URL and cartridge settings"
: : Can anybody help me please?.
: : Ruy Chicaco
null -
Getting ie error when calling event from code.
Hi all!
I've got an application (running on 6.40 sp8, ep6 sp2) that is pretty basic by all means. Since I want to implement some way to tell the user when he/she has made an error or just to inform him/her about something, I decided to use the ConfirmationDialog.
I've created an action called onActionShowErrorMessage in my view. This action is tied to my controller and an event defined in the controller.
Hence, when I want to show the ConfirmationDialog to show the user an error message, I call the controller method and in the method I fire the event that my view method is looking for.
So far so good..
When I call my controller method from a button action in the view everything works nicely, but when I try to call it from the wdInit method it fails?! I do get the ConfirmationDialog up but I also get an IE error window telling me that IE is trying to open a page it cannot find. I have no idea why it tries to open any page at all, since there is no navigation defined for this action.
Anyone got an idea? I couldn't find any good stuff in the system logs either
Best regards,
AndreasHello Sam!
Thanks for your answer! I would like to use something more of a pop thing, since i want to make sure the user sees it. The MessageManager does not work as good as it used to anymore, since it puts all messages in the bottom of the page. This page needs to be scrolled in order to see the error message..
Anyone got an idea of a workaround? I'm reading a propsfile, and in case I'm not able to read it I want to display this to the user.
B.R
Andreas -
Error when calling webservice from oracle function.
Hi,
I am getting following error when i am trying to call webserivce from oracle function. Please can anyone suggest the required solution. Below is the error obtained.
Thanks.
ERROR at line 1:
ORA-31011: XML parsing failed
ORA-19202: Error occurred in XML processing
LPX-00225: end-element tag "UL" does not match start-element tag "P"
Error at line 15
ORA-06512: at "SYS.XMLTYPE", line 54
ORA-06512: at "SCOTT.DEMO_SOAP", line 87
ORA-06512: at "SCOTT.WEB_SERVICE", line 17The error message implies that the web service is returning something that is not well formed xml. Can you verify what is being returned by the web service call
-
Oracle error ORA-39127 unexpected error from call to export_string
Hi
The export for an database encounters the following error .Can someone take a look at the cause please.
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/PRE_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/PROCOBJ
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_SERVER_ALERT_EXPORT.SYSTEM_INFO_EXP(1,dynconnect,'11.02.00.02.00',newblock)
ORA-13914: Threshold notification failed.
ORA-06512: at "SYS.DBMS_SERVER_ALERT", line 187
ORA-06512: at "SYS.DBMS_SERVER_ALERT_EXPORT", line 132
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 7418
Processing object type DATABASE_EXPORT/SYSTEM_PROCOBJACT/POST_SYSTEM_ACTIONS/PROCACT_SYSTEM
Processing object type DATABASE_EXPORT/SCHEMA/PROCACT_SCHEMA
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/TABLE
Processing object type DATABASE_EXPORT/SCHEMA/TABLE/PRE_TABLE_ACTION
RegardsThere are a lot of similar errors on MOS, perhaps you should search through them and see if any apply to you.
What version/patch level are you on? Have you made any grid control threshold modifications? Are you using procobol in an upgraded database?
You might want to go through support for this one.
Maybe you are looking for
-
when instantiating a process with decision service in it, i get the followign exception: Error while executing a rule session unit of work. The rule session CCC2:280001 failed to execute a unit of work. Check the underlying exception and correct the
-
Ken Burns effect flickering in burned idvd
I have put together a movie in imovie6 and included still photos. The burned dvd looks fine except for the photos where i used the Ken Burns effect. What is causing this?
-
Is there a tutorial on how to make a long press menu appear on a table item with storyboard?
Hi there! I'm very new to app development and i've been playing around with designing a few. I wanted to know, how can you create a long press menu appear when pressing and holding on a table item. Id like it to pull up a menu with 3 options, each le
-
Display problems when installing Panther
I purchased a G3 blue/white from work with 9.2.2 and the panther install disks (3 of them). The monitor was fine in 9.2.2. Upon inserting the panther disks, the display went grayscale and was next to unreadable. However, the install continued through
-
When I uploaded Disc 3 (out of 4) to the new Joni Mitchell Album, there was a choice to click "Joni 3" or "Love Has Many Faces." I accidentally clicked Joni 3. This made the third disc show up as a separate album. When I renamed it to Love Has Man