Spry and PHP $_SESSION

Hi, I've declared some PHP session variables in my index.php
however when i call Spry.Utils.updateContent to load in a new php
fragment within a div, the $_SESSION vars arent accessable within
that new php fragment, going to a new page can access the session
vars but it seems AJAX calls cant. Is there any way around this?
Cheers.

Ok so through further experiment, Its nothing to do with Spry
or AJAX.
To pass session variables between php fragments loaded via
Spry/AJAX you simply need to make sure youve started your session
again in the new php fragment. Then you can access all the session
vars from the main document.

Similar Messages

  • OT: Tutorial | How to author HTML, CSS, jQuery, and PHP 5.4 in Dreamweaver CC

    Hi all,
    Dreamweaver CC 2014 comes with a host of tutorials for both beginners and advanced users. In this tutorial you will learn how the latest support for HTML5, CSS3, jQuery and PHP5.4 in Dreamweaver can help you author static, dynamic, mobile or responsive projects.
    We would love to hear your opinion on this tutorial after you complete the training.
    https://helpx.adobe.com/dreamweaver/how-to/html-css-jquery-php-dreamweaver.html?scid=socia l26198776
    Thanks,
    Preran

    jlig wrote:
    > David, I just read thru the sample chapter 7 "Building
    Site Navigation with the
    > Spry Menu bar".
    > - Finally a Spry resource that is friendly , thorough
    and easy to follow
    > along.
    > - I especially like your honest comments in the "Mixed
    Blessing" section.
    Glad you found it useful. I felt it was essential to present
    a balanced
    view of Spry widgets, rather than giving a starry-eyed one.
    > Trying to adjust the Tab Colors, Fonts, CSS page sizes,
    margins, borders, etc
    > is a bit of a nightmare for me. I know it is just a
    matter of learning, but it
    > would help to have resources like yours that take all of
    the practical
    > considerations into mind for end-users.
    It is quite easy to do simple things with CSS, but it's very
    powerful,
    and has a long learning curve. Keep at it, and you'll get
    there in the end.
    > ps: How about a similiar new resource: "The Essential
    Guide to Dreamweaver
    > CS3 with ADDT, SPRY, CSS, AJAX and PHP / ColdFusion"
    I'm not a big fan of ADDT (Adobe knows my opinions, because I
    have told
    them directly). I would like to see how ADDT develops before
    committing
    to writing about it. As for ColdFusion, I experimented with
    it a long
    time ago, but decided I preferred to improve my knowledge of
    PHP before
    branching out into other fields.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • Missing File - Adobe Dreamweaver CS3 with ASP, Coldfusion, and PHP

    On page 263 of Adobe Dreamweaver CS3 with ASP, Coldfusion,
    and PHP by:Jeffrey Bardzel and Bob Flynn the file called
    countryDetailXML.asp is missing. How can I find that file? Any
    idea?
    Thanks for your help.

    @citaiz,
    That file is created earlier in the lesson in an exercise
    starting on page 257. For the sake of the lesson, you can use
    countryDetail.xml that is included in the lesson 09 start folder.
    It is not important for this lesson that the XML is a static file
    or one generated in real time from the database. The version of
    Spry (1.4) that shipped with DW CS3 used XML data only. The current
    version (1.6.1) can use JSON and HTML tables for the data source as
    well. You can get the latest version of Spry for free at
    http://labs.adobe.com/technologies/spry/,
    including an extension to update your copy of DW to the latest
    version.
    Bob Flynn

  • Spry and FileMaker

    I'm using Spry in CS3 along with FileMaker as the databse where I want to store data that is built in a Spry framework.  Does anyone know if it is possible to stuff data into FileMaker from Spry?  And if so, how ??
    dm225

    Yes Spry and FileMaker Play very well together, both of my websites are driven by FileMaker 10 and Adobe Spry.
    There is a complete FileMaker API for PHP.  You do need to have the FileMaker files hosted by FileMaker Server.
    Get the file from my 2008 Presentation on FileMaker and Adobe Spry off my site http://apphiasolutions.com/downloads.php
    It contains a complete sample cms solution with the powerpoint.
    If you need more info contact me directly.
    Joe
    Apphia Solutions, LLC
    [email protected]
    http://apphiasolutions.com

  • Spry and Google  Open Social

    ciao all ,
    I'm too curiuos to start a new project using spry and the
    Google " toy" OPENSOCIAL , just to know before starting , do the
    Spry team knows if there's any incompatibility between your great
    ajax framework and their APIS
    for example :
    http://code.google.com/apis/opensocial/articles/readwrite.html
    excuse me if this post is out of topic
    thanks in advance
    Paolo

    5h4k42u1u wrote:
    > if i'd use the spry tables with an RSS feed, it'll work
    with IE but not with
    > FF, but then when i try it with a local XML file, it'll
    work with FF but not
    > IE? In fact, why does it have trouble at all with the
    local file, there should
    > be no cross domains to worry about, right?
    You're right that there should be no problem with a local
    file, but
    without seeing the XML file and your code, it's impossible to
    say what's
    causing the problem. I think your best bet is to post a more
    detailed
    question in the Spry forum.
    http://www.adobe.com/go/labs_spry_pr1_forum
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • The Essential Guide to Dreamweaver CS3 with CSS, Ajax, and PHP by David Powers

    The Essential Guide to Dreamweaver CS3 with CSS, Ajax, and
    PHP by David Powers:
    Would this book help me learn about Spry and Ajax and how
    applications can be made with them, if I my e-commerce site runs on
    a compiled C code shopping cart (ShopSite) but supports PHP
    server-side scripts or is it only for shopping carts based on PHP
    itself (like X-Cart)?
    I am not sure. Someone please let me know so I can purchase
    this book. Thanks.

    ahsenabro wrote:
    > 1. Do I have to be a developer/programmer in order to
    learn from this book or
    > can a tech-savvy entrepreneur can also get some gems out
    of it and direct his
    > programmer?
    You don't need any prior knowledge of Ajax or PHP, but you do
    need to
    know the basics of HTML and CSS. As I say in the
    introduction, "You
    don't need to be an expert, but you do need to have an
    inquiring mind.
    It doesn't teach the basics of web design, nor does it
    attempt to list
    every single feature in Dreamweaver CS3. There are plenty of
    other books
    to fill that gap. However, by working through this book,
    you'll gain an
    in-depth knowledge of the most important features of
    Dreamweaver."
    > 2. I am interested in purchasing this book mainly to
    implement cool Ajax/Spry
    > stuff on my e-commerce site. I am asking about PHP
    because the book's content
    > mentions making a PHP site. Now I realize this book is
    not about shopping
    > carts, but the Ajax/Spry stuff can be implemented on
    e-commerce sites, right?
    The book provides detailed coverage of the Spry 1.4 features
    in
    Dreamweaver CS3, which can be applied to any site. With minor
    adaptation, you can also use Spry 1.6. It's important to
    realize,
    though, that the Spry/Ajax features in Dreamweaver CS3 do
    *not* cover
    asynchronous requests to the server. The ability to
    communicate
    asynchronously with the server was added in Spry 1.6. If it's
    asynchronous server calls and responses that you're after,
    your
    programmer will need to dig around in the Spry 1.6
    documentation on the
    Adobe Labs site, and hand-code it.
    The Spry features covered in the book are Spry Effects, Spry
    UI widgets
    (menu, accordion, tabbed panels, and collapsible panels),
    Spry
    Validation Widgets, and Spry XML Data Sets.
    > I just want to know if I can learn and implement
    Ajax/Spry apps on my
    > simple HTML/CSS-based pages, on a server which allows
    server-side PHP scripts
    > but the pages themselves are not with .php extension. Is
    this book still going
    > to be applicable?
    Yes. All the Spry techniques can be used on any web page. It
    doesn't
    need to be a PHP one.
    David Powers, Adobe Community Expert
    Author, "The Essential Guide to Dreamweaver CS3" (friends of
    ED)
    Author, "PHP Solutions" (friends of ED)
    http://foundationphp.com/

  • [Solved]Lighttpd and php/fcgi

    I installed and configured lighttpd and php/fcgi exactly as found http://wiki.archlinux.org/index.php/Lig … nd_Non-SSL except for: ssl and eaccelerator. I am also running php with the lighttpd user instead of phpuser.
    I have done chmod 775 for /var/run/ligghtpd and chown lighttpd -R /var/run/lighttpd and still get these errors.
    2008-05-02 10:14:28: (log.c.75) server started
    2008-05-02 10:14:28: (mod_fastcgi.c.904) bind failed for: unix:/var/run/lighttpd/php-fastcgi.socket-0 Permission denied
    2008-05-02 10:14:28: (mod_fastcgi.c.1340) [ERROR]: spawning fcgi failed.
    2008-05-02 10:14:28: (server.c.908) Configuration of plugins failed. Going down.
    But if I stop /etc/rc.d/spawn-php, and restart my server, everything works perfectly, the phpinfo page, and a basic php include.
    my /etc/php/php.ini
    [PHP]
    ; About php.ini ;
    ; This file controls many aspects of PHP's behavior. In order for PHP to
    ; read it, it must be named 'php.ini'. PHP looks for it in the current
    ; working directory, in the path designated by the environment variable
    ; PHPRC, and in the path that was defined in compile time (in that order).
    ; The path in which the php.ini file is looked for can be overridden using
    ; the -c argument in command line mode.
    ; The syntax of the file is extremely simple. Whitespace and Lines
    ; beginning with a semicolon are silently ignored (as you probably guessed).
    ; Section headers (e.g. [Foo]) are also silently ignored, even though
    ; they might mean something in the future.
    ; Directives are specified using the following syntax:
    ; directive = value
    ; Directive names are *case sensitive* - foo=bar is different from FOO=bar.
    ; The value can be a string, a number, a PHP constant (e.g. E_ALL or M_PI), one
    ; of the INI constants (On, Off, True, False, Yes, No and None) or an expression
    ; (e.g. E_ALL & ~E_NOTICE), or a quoted string ("foo").
    ; Expressions in the INI file are limited to bitwise operators and parentheses:
    ; | bitwise OR
    ; & bitwise AND
    ; ~ bitwise NOT
    ; ! boolean NOT
    ; Boolean flags can be turned on using the values 1, On, True or Yes.
    ; They can be turned off using the values 0, Off, False or No.
    ; An empty string can be denoted by simply not writing anything after the equal
    ; sign, or by using the None keyword:
    ; foo = ; sets foo to an empty string
    ; foo = none ; sets foo to an empty string
    ; foo = "none" ; sets foo to the string 'none'
    ; If you use constants in your value, and these constants belong to a
    ; dynamically loaded extension (either a PHP extension or a Zend extension),
    ; you may only use these constants *after* the line that loads the extension.
    ; About this file ;
    ; This is the recommended, PHP 5-style version of the php.ini-dist file. It
    ; sets some non standard settings, that make PHP more efficient, more secure,
    ; and encourage cleaner coding.
    ; The price is that with these settings, PHP may be incompatible with some
    ; applications, and sometimes, more difficult to develop with. Using this
    ; file is warmly recommended for production sites. As all of the changes from
    ; the standard settings are thoroughly documented, you can go over each one,
    ; and decide whether you want to use it or not.
    ; For general information about the php.ini file, please consult the php.ini-dist
    ; file, included in your PHP distribution.
    ; This file is different from the php.ini-dist file in the fact that it features
    ; different values for several directives, in order to improve performance, while
    ; possibly breaking compatibility with the standard out-of-the-box behavior of
    ; PHP. Please make sure you read what's different, and modify your scripts
    ; accordingly, if you decide to use this file instead.
    ; - register_long_arrays = Off [Performance]
    ; Disables registration of the older (and deprecated) long predefined array
    ; variables ($HTTP_*_VARS). Instead, use the superglobals that were
    ; introduced in PHP 4.1.0
    ; - display_errors = Off [Security]
    ; With this directive set to off, errors that occur during the execution of
    ; scripts will no longer be displayed as a part of the script output, and thus,
    ; will no longer be exposed to remote users. With some errors, the error message
    ; content may expose information about your script, web server, or database
    ; server that may be exploitable for hacking. Production sites should have this
    ; directive set to off.
    ; - log_errors = On [Security]
    ; This directive complements the above one. Any errors that occur during the
    ; execution of your script will be logged (typically, to your server's error log,
    ; but can be configured in several ways). Along with setting display_errors to off,
    ; this setup gives you the ability to fully understand what may have gone wrong,
    ; without exposing any sensitive information to remote users.
    ; - output_buffering = 4096 [Performance]
    ; Set a 4KB output buffer. Enabling output buffering typically results in less
    ; writes, and sometimes less packets sent on the wire, which can often lead to
    ; better performance. The gain this directive actually yields greatly depends
    ; on which Web server you're working with, and what kind of scripts you're using.
    ; - register_argc_argv = Off [Performance]
    ; Disables registration of the somewhat redundant $argv and $argc global
    ; variables.
    ; - magic_quotes_gpc = Off [Performance]
    ; Input data is no longer escaped with slashes so that it can be sent into
    ; SQL databases without further manipulation. Instead, you should use the
    ; function addslashes() on each input element you wish to send to a database.
    ; - variables_order = "GPCS" [Performance]
    ; The environment variables are not hashed into the $_ENV. To access
    ; environment variables, you can use getenv() instead.
    ; - error_reporting = E_ALL [Code Cleanliness, Security(?)]
    ; By default, PHP suppresses errors of type E_NOTICE. These error messages
    ; are emitted for non-critical errors, but that could be a symptom of a bigger
    ; problem. Most notably, this will cause error messages about the use
    ; of uninitialized variables to be displayed.
    ; - allow_call_time_pass_reference = Off [Code cleanliness]
    ; It's not possible to decide to force a variable to be passed by reference
    ; when calling a function. The PHP 4 style to do this is by making the
    ; function require the relevant argument by reference.
    ; - short_open_tag = Off [Portability]
    ; Using short tags is discouraged when developing code meant for redistribution
    ; since short tags may not be supported on the target server.
    ; Language Options ;
    ; Enable the PHP scripting language engine under Apache.
    engine = On
    ; Enable compatibility mode with Zend Engine 1 (PHP 4.x)
    zend.ze1_compatibility_mode = Off
    ; Allow the <? tag. Otherwise, only <?php and <script> tags are recognized.
    ; NOTE: Using short tags should be avoided when developing applications or
    ; libraries that are meant for redistribution, or deployment on PHP
    ; servers which are not under your control, because short tags may not
    ; be supported on the target server. For portable, redistributable code,
    ; be sure not to use short tags.
    short_open_tag = Off
    ; Allow ASP-style <% %> tags.
    asp_tags = Off
    ; The number of significant digits displayed in floating point numbers.
    precision = 14
    ; Enforce year 2000 compliance (will cause problems with non-compliant browsers)
    y2k_compliance = On
    ; Output buffering allows you to send header lines (including cookies) even
    ; after you send body content, at the price of slowing PHP's output layer a
    ; bit. You can enable output buffering during runtime by calling the output
    ; buffering functions. You can also enable output buffering for all files by
    ; setting this directive to On. If you wish to limit the size of the buffer
    ; to a certain size - you can use a maximum number of bytes instead of 'On', as
    ; a value for this directive (e.g., output_buffering=4096).
    output_buffering = 4096
    ; You can redirect all of the output of your scripts to a function. For
    ; example, if you set output_handler to "mb_output_handler", character
    ; encoding will be transparently converted to the specified encoding.
    ; Setting any output handler automatically turns on output buffering.
    ; Note: People who wrote portable scripts should not depend on this ini
    ; directive. Instead, explicitly set the output handler using ob_start().
    ; Using this ini directive may cause problems unless you know what script
    ; is doing.
    ; Note: You cannot use both "mb_output_handler" with "ob_iconv_handler"
    ; and you cannot use both "ob_gzhandler" and "zlib.output_compression".
    ; Note: output_handler must be empty if this is set 'On' !!!!
    ; Instead you must use zlib.output_handler.
    ;output_handler =
    ; Transparent output compression using the zlib library
    ; Valid values for this option are 'off', 'on', or a specific buffer size
    ; to be used for compression (default is 4KB)
    ; Note: Resulting chunk size may vary due to nature of compression. PHP
    ; outputs chunks that are few hundreds bytes each as a result of
    ; compression. If you prefer a larger chunk size for better
    ; performance, enable output_buffering in addition.
    ; Note: You need to use zlib.output_handler instead of the standard
    ; output_handler, or otherwise the output will be corrupted.
    zlib.output_compression = On
    ;zlib.output_compression_level = -1
    ; You cannot specify additional output handlers if zlib.output_compression
    ; is activated here. This setting does the same as output_handler but in
    ; a different order.
    ;zlib.output_handler =
    ; Implicit flush tells PHP to tell the output layer to flush itself
    ; automatically after every output block. This is equivalent to calling the
    ; PHP function flush() after each and every call to print() or echo() and each
    ; and every HTML block. Turning this option on has serious performance
    ; implications and is generally recommended for debugging purposes only.
    implicit_flush = Off
    ; The unserialize callback function will be called (with the undefined class'
    ; name as parameter), if the unserializer finds an undefined class
    ; which should be instantiated.
    ; A warning appears if the specified function is not defined, or if the
    ; function doesn't include/implement the missing class.
    ; So only set this entry, if you really want to implement such a
    ; callback-function.
    unserialize_callback_func=
    ; When floats & doubles are serialized store serialize_precision significant
    ; digits after the floating point. The default value ensures that when floats
    ; are decoded with unserialize, the data will remain the same.
    serialize_precision = 100
    ; Whether to enable the ability to force arguments to be passed by reference
    ; at function call time. This method is deprecated and is likely to be
    ; unsupported in future versions of PHP/Zend. The encouraged method of
    ; specifying which arguments should be passed by reference is in the function
    ; declaration. You're encouraged to try and turn this option Off and make
    ; sure your scripts work properly with it in order to ensure they will work
    ; with future versions of the language (you will receive a warning each time
    ; you use this feature, and the argument will be passed by value instead of by
    ; reference).
    allow_call_time_pass_reference = Off
    ; Safe Mode
    safe_mode = Off
    ; By default, Safe Mode does a UID compare check when
    ; opening files. If you want to relax this to a GID compare,
    ; then turn on safe_mode_gid.
    safe_mode_gid = Off
    ; When safe_mode is on, UID/GID checks are bypassed when
    ; including files from this directory and its subdirectories.
    ; (directory must also be in include_path or full path must
    ; be used when including)
    safe_mode_include_dir =
    ; When safe_mode is on, only executables located in the safe_mode_exec_dir
    ; will be allowed to be executed via the exec family of functions.
    safe_mode_exec_dir =
    ; Setting certain environment variables may be a potential security breach.
    ; This directive contains a comma-delimited list of prefixes. In Safe Mode,
    ; the user may only alter environment variables whose names begin with the
    ; prefixes supplied here. By default, users will only be able to set
    ; environment variables that begin with PHP_ (e.g. PHP_FOO=BAR).
    ; Note: If this directive is empty, PHP will let the user modify ANY
    ; environment variable!
    safe_mode_allowed_env_vars = PHP_
    ; This directive contains a comma-delimited list of environment variables that
    ; the end user won't be able to change using putenv(). These variables will be
    ; protected even if safe_mode_allowed_env_vars is set to allow to change them.
    safe_mode_protected_env_vars = LD_LIBRARY_PATH
    ; open_basedir, if set, limits all file operations to the defined directory
    ; and below. This directive makes most sense if used in a per-directory
    ; or per-virtualhost web server configuration file. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    open_basedir = /home/:/tmp/:/usr/share/pear/
    ; This directive allows you to disable certain functions for security reasons.
    ; It receives a comma-delimited list of function names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_functions =
    ; This directive allows you to disable certain classes for security reasons.
    ; It receives a comma-delimited list of class names. This directive is
    ; *NOT* affected by whether Safe Mode is turned On or Off.
    disable_classes =
    ; Colors for Syntax Highlighting mode. Anything that's acceptable in
    ; <span style="color: ???????"> would work.
    ;highlight.string = #DD0000
    ;highlight.comment = #FF9900
    ;highlight.keyword = #007700
    ;highlight.bg = #FFFFFF
    ;highlight.default = #0000BB
    ;highlight.html = #000000
    ; If enabled, the request will be allowed to complete even if the user aborts
    ; the request. Consider enabling it if executing long request, which may end up
    ; being interrupted by the user or a browser timing out.
    ; ignore_user_abort = On
    ; Determines the size of the realpath cache to be used by PHP. This value should
    ; be increased on systems where PHP opens many files to reflect the quantity of
    ; the file operations performed.
    ; realpath_cache_size=16k
    ; Duration of time, in seconds for which to cache realpath information for a given
    ; file or directory. For systems with rarely changing files, consider increasing this
    ; value.
    ; realpath_cache_ttl=120
    ; Misc
    ; Decides whether PHP may expose the fact that it is installed on the server
    ; (e.g. by adding its signature to the Web server header). It is no security
    ; threat in any way, but it makes it possible to determine whether you use PHP
    ; on your server or not.
    expose_php = Off
    ; Resource Limits ;
    max_execution_time = 30 ; Maximum execution time of each script, in seconds
    max_input_time = 60 ; Maximum amount of time each script may spend parsing request data
    ;max_input_nesting_level = 64 ; Maximum input variable nesting level
    memory_limit = 32M ; Maximum amount of memory a script may consume (32MB)
    ; Error handling and logging ;
    ; error_reporting is a bit-field. Or each number up to get desired error
    ; reporting level
    ; E_ALL - All errors and warnings (doesn't include E_STRICT)
    ; E_ERROR - fatal run-time errors
    ; E_RECOVERABLE_ERROR - almost fatal run-time errors
    ; E_WARNING - run-time warnings (non-fatal errors)
    ; E_PARSE - compile-time parse errors
    ; E_NOTICE - run-time notices (these are warnings which often result
    ; from a bug in your code, but it's possible that it was
    ; intentional (e.g., using an uninitialized variable and
    ; relying on the fact it's automatically initialized to an
    ; empty string)
    ; E_STRICT - run-time notices, enable to have PHP suggest changes
    ; to your code which will ensure the best interoperability
    ; and forward compatibility of your code
    ; E_CORE_ERROR - fatal errors that occur during PHP's initial startup
    ; E_CORE_WARNING - warnings (non-fatal errors) that occur during PHP's
    ; initial startup
    ; E_COMPILE_ERROR - fatal compile-time errors
    ; E_COMPILE_WARNING - compile-time warnings (non-fatal errors)
    ; E_USER_ERROR - user-generated error message
    ; E_USER_WARNING - user-generated warning message
    ; E_USER_NOTICE - user-generated notice message
    ; Examples:
    ; - Show all errors, except for notices and coding standards warnings
    ;error_reporting = E_ALL & ~E_NOTICE
    ; - Show all errors, except for notices
    ;error_reporting = E_ALL & ~E_NOTICE | E_STRICT
    ; - Show only errors
    ;error_reporting = E_COMPILE_ERROR|E_RECOVERABLE_ERROR|E_ERROR|E_CORE_ERROR
    ; - Show all errors, except coding standards warnings
    error_reporting = E_ALL
    ; Print out errors (as a part of the output). For production web sites,
    ; you're strongly encouraged to turn this feature off, and use error logging
    ; instead (see below). Keeping display_errors enabled on a production web site
    ; may reveal security information to end users, such as file paths on your Web
    ; server, your database schema or other information.
    ; possible values for display_errors:
    ; Off - Do not display any errors
    ; stderr - Display errors to STDERR (affects only CGI/CLI binaries!)
    ; On or stdout - Display errors to STDOUT (default)
    ; To output errors to STDERR with CGI/CLI:
    ;display_errors = "stderr"
    ; Default
    display_errors = Off
    ; Even when display_errors is on, errors that occur during PHP's startup
    ; sequence are not displayed. It's strongly recommended to keep
    ; display_startup_errors off, except for when debugging.
    display_startup_errors = Off
    ; Log errors into a log file (server-specific log, stderr, or error_log (below))
    ; As stated above, you're strongly advised to use error logging in place of
    ; error displaying on production web sites.
    log_errors = On
    ; Set maximum length of log_errors. In error_log information about the source is
    ; added. The default is 1024 and 0 allows to not apply any maximum length at all.
    log_errors_max_len = 1024
    ; Do not log repeated messages. Repeated errors must occur in same file on same
    ; line until ignore_repeated_source is set true.
    ignore_repeated_errors = Off
    ; Ignore source of message when ignoring repeated messages. When this setting
    ; is On you will not log errors with repeated messages from different files or
    ; source lines.
    ignore_repeated_source = Off
    ; If this parameter is set to Off, then memory leaks will not be shown (on
    ; stdout or in the log). This has only effect in a debug compile, and if
    ; error reporting includes E_WARNING in the allowed list
    report_memleaks = Off
    ;report_zend_debug = 0
    ; Store the last error/warning message in $php_errormsg (boolean).
    track_errors = Off
    ; Disable the inclusion of HTML tags in error messages.
    ; Note: Never use this feature for production boxes.
    ;html_errors = Off
    ; If html_errors is set On PHP produces clickable error messages that direct
    ; to a page describing the error or function causing the error in detail.
    ; You can download a copy of the PHP manual from http://www.php.net/docs.php
    ; and change docref_root to the base URL of your local copy including the
    ; leading '/'. You must also specify the file extension being used including
    ; the dot.
    ; Note: Never use this feature for production boxes.
    ;docref_root = "/phpmanual/"
    ;docref_ext = .html
    ; String to output before an error message.
    ;error_prepend_string = "<font color=ff0000>"
    ; String to output after an error message.
    ;error_append_string = "</font>"
    ; Log errors to specified file.
    ;error_log = filename
    ; Log errors to syslog.
    error_log = syslog
    ; Data Handling ;
    ; Note - track_vars is ALWAYS enabled as of PHP 4.0.3
    ; The separator used in PHP generated URLs to separate arguments.
    ; Default is "&".
    ;arg_separator.output = "&"
    ; List of separator(s) used by PHP to parse input URLs into variables.
    ; Default is "&".
    ; NOTE: Every character in this directive is considered as separator!
    ;arg_separator.input = ";&"
    ; This directive describes the order in which PHP registers GET, POST, Cookie,
    ; Environment and Built-in variables (G, P, C, E & S respectively, often
    ; referred to as EGPCS or GPC). Registration is done from left to right, newer
    ; values override older values.
    variables_order = "GPCS"
    ; Whether or not to register the EGPCS variables as global variables. You may
    ; want to turn this off if you don't want to clutter your scripts' global scope
    ; with user data. This makes most sense when coupled with track_vars - in which
    ; case you can access all of the GPC variables through the $HTTP_*_VARS[],
    ; variables.
    ; You should do your best to write your scripts so that they do not require
    ; register_globals to be on; Using form variables as globals can easily lead
    ; to possible security problems, if the code is not very well thought of.
    register_globals = Off
    ; Whether or not to register the old-style input arrays, HTTP_GET_VARS
    ; and friends. If you're not using them, it's recommended to turn them off,
    ; for performance reasons.
    register_long_arrays = Off
    ; This directive tells PHP whether to declare the argv&argc variables (that
    ; would contain the GET information). If you don't use these variables, you
    ; should turn it off for increased performance.
    register_argc_argv = Off
    ; When enabled, the SERVER and ENV variables are created when they're first
    ; used (Just In Time) instead of when the script starts. If these variables
    ; are not used within a script, having this directive on will result in a
    ; performance gain. The PHP directives register_globals, register_long_arrays,
    ; and register_argc_argv must be disabled for this directive to have any affect.
    auto_globals_jit = On
    ; Maximum size of POST data that PHP will accept.
    post_max_size = 8M
    ; Magic quotes
    ; Magic quotes for incoming GET/POST/Cookie data.
    magic_quotes_gpc = Off
    ; Magic quotes for runtime-generated data, e.g. data from SQL, from exec(), etc.
    magic_quotes_runtime = Off
    ; Use Sybase-style magic quotes (escape ' with '' instead of \').
    magic_quotes_sybase = Off
    ; Automatically add files before or after any PHP document.
    auto_prepend_file =
    auto_append_file =
    ; As of 4.0b4, PHP always outputs a character encoding by default in
    ; the Content-type: header. To disable sending of the charset, simply
    ; set it to be empty.
    ; PHP's built-in default is text/html
    default_mimetype = "text/html"
    ;default_charset = "iso-8859-1"
    ; Always populate the $HTTP_RAW_POST_DATA variable.
    ;always_populate_raw_post_data = On
    ; Paths and Directories ;
    ; UNIX: "/path1:/path2"
    include_path = ".:/usr/share/pear"
    ; The root of the PHP pages, used only if nonempty.
    ; if PHP was not compiled with FORCE_REDIRECT, you SHOULD set doc_root
    ; if you are running php as a CGI under any web server (other than IIS)
    ; see documentation for security issues. The alternate is to use the
    ; cgi.force_redirect configuration below
    doc_root =
    ; The directory under which PHP opens the script using /~username used only
    ; if nonempty.
    user_dir =
    ; Directory in which the loadable extensions (modules) reside.
    extension_dir = "/usr/lib/php/20060613/"
    ; Whether or not to enable the dl() function. The dl() function does NOT work
    ; properly in multithreaded servers, such as IIS or Zeus, and is automatically
    ; disabled on them.
    enable_dl = Off
    ; cgi.force_redirect is necessary to provide security running PHP as a CGI under
    ; most web servers. Left undefined, PHP turns this on by default. You can
    ; turn it off here AT YOUR OWN RISK
    ; **You CAN safely turn this off for IIS, in fact, you MUST.**
    ; cgi.force_redirect = 1
    ; if cgi.nph is enabled it will force cgi to always sent Status: 200 with
    ; every request.
    ; cgi.nph = 1
    ; if cgi.force_redirect is turned on, and you are not running under Apache or Netscape
    ; (iPlanet) web servers, you MAY need to set an environment variable name that PHP
    ; will look for to know it is OK to continue execution. Setting this variable MAY
    ; cause security issues, KNOW WHAT YOU ARE DOING FIRST.
    ; cgi.redirect_status_env = ;
    ; cgi.fix_pathinfo provides *real* PATH_INFO/PATH_TRANSLATED support for CGI. PHP's
    ; previous behaviour was to set PATH_TRANSLATED to SCRIPT_FILENAME, and to not grok
    ; what PATH_INFO is. For more information on PATH_INFO, see the cgi specs. Setting
    ; this to 1 will cause PHP CGI to fix it's paths to conform to the spec. A setting
    ; of zero causes PHP to behave as before. Default is 1. You should fix your scripts
    ; to use SCRIPT_FILENAME rather than PATH_TRANSLATED.
    cgi.fix_pathinfo=1
    ; FastCGI under IIS (on WINNT based OS) supports the ability to impersonate
    ; security tokens of the calling client. This allows IIS to define the
    ; security context that the request runs under. mod_fastcgi under Apache
    ; does not currently support this feature (03/17/2002)
    ; Set to 1 if running under IIS. Default is zero.
    ; fastcgi.impersonate = 1;
    ; Disable logging through FastCGI connection
    ; fastcgi.logging = 0
    ; cgi.rfc2616_headers configuration option tells PHP what type of headers to
    ; use when sending HTTP response code. If it's set 0 PHP sends Status: header that
    ; is supported by Apache. When this option is set to 1 PHP will send
    ; RFC2616 compliant header.
    ; Default is zero.
    ;cgi.rfc2616_headers = 0
    ; File Uploads ;
    ; Whether to allow HTTP file uploads.
    file_uploads = On
    ; Temporary directory for HTTP uploaded files (will use system default if not
    ; specified).
    ;upload_tmp_dir =
    ; Maximum allowed size for uploaded files.
    upload_max_filesize = 2M
    ; Fopen wrappers ;
    ; Whether to allow the treatment of URLs (like http:// or ftp://) as files.
    allow_url_fopen = Off
    ; Whether to allow include/require to open URLs (like http:// or ftp://) as files.
    allow_url_include = Off
    ; Define the anonymous ftp password (your email address)
    ;from="[email protected]"
    ; Define the User-Agent string
    ; user_agent="PHP"
    ; Default timeout for socket based streams (seconds)
    default_socket_timeout = 60
    ; Dynamic Extensions ;
    ; If you wish to have an extension loaded automatically, use the following
    ; syntax:
    ; extension=modulename.extension
    ; For example, under UNIX:
    ; extension=msql.so
    ; Note that it should be the name of the module only; no directory information
    ; needs to go here. Specify the location of the extension with the
    ; extension_dir directive above.
    ; Module Settings ;
    [Date]
    ; Defines the default timezone used by the date functions
    ;date.timezone =
    ;date.default_latitude = 31.7667
    ;date.default_longitude = 35.2333
    ;date.sunrise_zenith = 90.583333
    ;date.sunset_zenith = 90.583333
    [filter]
    ;filter.default = unsafe_raw
    ;filter.default_flags =
    [iconv]
    ;iconv.input_encoding = ISO-8859-1
    ;iconv.internal_encoding = ISO-8859-1
    ;iconv.output_encoding = ISO-8859-1
    [sqlite]
    ;sqlite.assoc_case = 0
    [xmlrpc]
    ;xmlrpc_error_number = 0
    ;xmlrpc_errors = 0
    [Pcre]
    ;PCRE library backtracking limit.
    ;pcre.backtrack_limit=100000
    ;PCRE library recursion limit.
    ;Please note that if you set this value to a high number you may consume all
    ;the available process stack and eventually crash PHP (due to reaching the
    ;stack size limit imposed by the Operating System).
    ;pcre.recursion_limit=100000
    [Syslog]
    ; Whether or not to define the various syslog variables (e.g. $LOG_PID,
    ; $LOG_CRON, etc.). Turning it off is a good idea performance-wise. In
    ; runtime, you can define these variables by calling define_syslog_variables().
    define_syslog_variables = Off
    [mail function]
    ; For Unix only. You may supply arguments as well (default: "sendmail -t -i").
    ;sendmail_path =
    ; Force the addition of the specified parameters to be passed as extra parameters
    ; to the sendmail binary. These parameters will always replace the value of
    ; the 5th parameter to mail(), even in safe mode.
    ;mail.force_extra_parameters =
    [SQL]
    sql.safe_mode = Off
    [ODBC]
    ;odbc.default_db = Not yet implemented
    ;odbc.default_user = Not yet implemented
    ;odbc.default_pw = Not yet implemented
    ; Allow or prevent persistent links.
    odbc.allow_persistent = On
    ; Check that a connection is still valid before reuse.
    odbc.check_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    odbc.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    odbc.max_links = -1
    ; Handling of LONG fields. Returns number of bytes to variables. 0 means
    ; passthru.
    odbc.defaultlrl = 4096
    ; Handling of binary data. 0 means passthru, 1 return as is, 2 convert to char.
    ; See the documentation on odbc_binmode and odbc_longreadlen for an explanation
    ; of uodbc.defaultlrl and uodbc.defaultbinmode
    odbc.defaultbinmode = 1
    [MySQL]
    ; Allow or prevent persistent links.
    mysql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mysql.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    mysql.max_links = -1
    ; Default port number for mysql_connect(). If unset, mysql_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysql.default_port =
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysql.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysql.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysql.default_user =
    ; Default password for mysql_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysql.default_password")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysql.default_password =
    ; Maximum time (in seconds) for connect timeout. -1 means no limit
    mysql.connect_timeout = 60
    ; Trace mode. When trace_mode is active (=On), warnings for table/index scans and
    ; SQL-Errors will be displayed.
    mysql.trace_mode = Off
    [MySQLi]
    ; Maximum number of links. -1 means no limit.
    mysqli.max_links = -1
    ; Default port number for mysqli_connect(). If unset, mysqli_connect() will use
    ; the $MYSQL_TCP_PORT or the mysql-tcp entry in /etc/services or the
    ; compile-time value defined MYSQL_PORT (in that order).
    mysqli.default_port = 3306
    ; Default socket name for local MySQL connects. If empty, uses the built-in
    ; MySQL defaults.
    mysqli.default_socket =
    ; Default host for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_host =
    ; Default user for mysql_connect() (doesn't apply in safe mode).
    mysqli.default_user =
    ; Default password for mysqli_connect() (doesn't apply in safe mode).
    ; Note that this is generally a *bad* idea to store passwords in this file.
    ; *Any* user with PHP access can run 'echo get_cfg_var("mysqli.default_pw")
    ; and reveal this password! And of course, any users with read access to this
    ; file will be able to reveal the password as well.
    mysqli.default_pw =
    ; Allow or prevent reconnect
    mysqli.reconnect = Off
    [mSQL]
    ; Allow or prevent persistent links.
    msql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    msql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    msql.max_links = -1
    [OCI8]
    ; enables privileged connections using external credentials (OCI_SYSOPER, OCI_SYSDBA)
    ;oci8.privileged_connect = Off
    ; Connection: The maximum number of persistent OCI8 connections per
    ; process. Using -1 means no limit.
    ;oci8.max_persistent = -1
    ; Connection: The maximum number of seconds a process is allowed to
    ; maintain an idle persistent connection. Using -1 means idle
    ; persistent connections will be maintained forever.
    ;oci8.persistent_timeout = -1
    ; Connection: The number of seconds that must pass before issuing a
    ; ping during oci_pconnect() to check the connection validity. When
    ; set to 0, each oci_pconnect() will cause a ping. Using -1 disables
    ; pings completely.
    ;oci8.ping_interval = 60
    ; Tuning: This option enables statement caching, and specifies how
    ; many statements to cache. Using 0 disables statement caching.
    ;oci8.statement_cache_size = 20
    ; Tuning: Enables statement prefetching and sets the default number of
    ; rows that will be fetched automatically after statement execution.
    ;oci8.default_prefetch = 10
    ; Compatibility. Using On means oci_close() will not close
    ; oci_connect() and oci_new_connect() connections.
    ;oci8.old_oci_close_semantics = Off
    [PostgresSQL]
    ; Allow or prevent persistent links.
    pgsql.allow_persistent = On
    ; Detect broken persistent links always with pg_pconnect().
    ; Auto reset feature requires a little overheads.
    pgsql.auto_reset_persistent = Off
    ; Maximum number of persistent links. -1 means no limit.
    pgsql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    pgsql.max_links = -1
    ; Ignore PostgreSQL backends Notice message or not.
    ; Notice message logging require a little overheads.
    pgsql.ignore_notice = 0
    ; Log PostgreSQL backends Noitce message or not.
    ; Unless pgsql.ignore_notice=0, module cannot log notice message.
    pgsql.log_notice = 0
    [Sybase]
    ; Allow or prevent persistent links.
    sybase.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybase.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybase.max_links = -1
    ;sybase.interface_file = "/usr/sybase/interfaces"
    ; Minimum error severity to display.
    sybase.min_error_severity = 10
    ; Minimum message severity to display.
    sybase.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    ; If on, this will cause PHP to automatically assign types to results according
    ; to their Sybase type, instead of treating them all as strings. This
    ; compatibility mode will probably not stay around forever, so try applying
    ; whatever necessary changes to your code, and turn it off.
    sybase.compatability_mode = Off
    [Sybase-CT]
    ; Allow or prevent persistent links.
    sybct.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    sybct.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    sybct.max_links = -1
    ; Minimum server message severity to display.
    sybct.min_server_severity = 10
    ; Minimum client message severity to display.
    sybct.min_client_severity = 10
    [bcmath]
    ; Number of decimal digits for all bcmath functions.
    bcmath.scale = 0
    [browscap]
    ;browscap = extra/browscap.ini
    [Informix]
    ; Default host for ifx_connect() (doesn't apply in safe mode).
    ifx.default_host =
    ; Default user for ifx_connect() (doesn't apply in safe mode).
    ifx.default_user =
    ; Default password for ifx_connect() (doesn't apply in safe mode).
    ifx.default_password =
    ; Allow or prevent persistent links.
    ifx.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    ifx.max_persistent = -1
    ; Maximum number of links (persistent + non-persistent). -1 means no limit.
    ifx.max_links = -1
    ; If on, select statements return the contents of a text blob instead of its id.
    ifx.textasvarchar = 0
    ; If on, select statements return the contents of a byte blob instead of its id.
    ifx.byteasvarchar = 0
    ; Trailing blanks are stripped from fixed-length char columns. May help the
    ; life of Informix SE users.
    ifx.charasvarchar = 0
    ; If on, the contents of text and byte blobs are dumped to a file instead of
    ; keeping them in memory.
    ifx.blobinfile = 0
    ; NULL's are returned as empty strings, unless this is set to 1. In that case,
    ; NULL's are returned as string 'NULL'.
    ifx.nullformat = 0
    [Session]
    ; Handler used to store/retrieve data.
    session.save_handler = files
    ; Argument passed to save_handler. In the case of files, this is the path
    ; where data files are stored.
    ; As of PHP 4.0.1, you can define the path as:
    ; session.save_path = "N;/path"
    ; where N is an integer. Instead of storing all the session files in
    ; /path, what this will do is use subdirectories N-levels deep, and
    ; store the session data in those directories. This is useful if you
    ; or your OS have problems with lots of files in one directory, and is
    ; a more efficient layout for servers that handle lots of sessions.
    ; NOTE 1: PHP will not create this directory structure automatically.
    ; You can use the script in the ext/session dir for that purpose.
    ; NOTE 2: See the section on garbage collection below if you choose to
    ; use subdirectories for session storage
    ; The file storage module creates files using mode 600 by default.
    ; You can change that by using
    ; session.save_path = "N;MODE;/path"
    ; where MODE is the octal representation of the mode. Note that this
    ; does not overwrite the process's umask.
    session.save_path = "/tmp"
    ; Whether to use cookies.
    session.use_cookies = 1
    ;session.cookie_secure =
    ; This option enables administrators to make their users invulnerable to
    ; attacks which involve passing session ids in URLs; defaults to 0.
    ; session.use_only_cookies = 1
    ; Name of the session (used as cookie name).
    session.name = PHPSESSID
    ; Initialize session on request startup.
    session.auto_start = 0
    ; Lifetime in seconds of cookie or, if 0, until browser is restarted.
    session.cookie_lifetime = 0
    ; The path for which the cookie is valid.
    session.cookie_path = /
    ; The domain for which the cookie is valid.
    session.cookie_domain =
    ; Whether or not to add the httpOnly flag to the cookie, which makes it inaccessible to browser scripting languages such as JavaScript.
    session.cookie_httponly =
    ; Handler used to serialize data. php is the standard serializer of PHP.
    session.serialize_handler = php
    ; Define the probability that the 'garbage collection' process is started
    ; on every session initialization.
    ; The probability is calculated by using gc_probability/gc_divisor,
    ; e.g. 1/100 means there is a 1% chance that the GC process starts
    ; on each request.
    session.gc_probability = 1
    session.gc_divisor = 1000
    ; After this number of seconds, stored data will be seen as 'garbage' and
    ; cleaned up by the garbage collection process.
    session.gc_maxlifetime = 1440
    ; NOTE: If you are using the subdirectory option for storing session files
    ; (see session.save_path above), then garbage collection does *not*
    ; happen automatically. You will need to do your own garbage
    ; collection through a shell script, cron entry, or some other method.
    ; For example, the following script would is the equivalent of
    ; setting session.gc_maxlifetime to 1440 (1440 seconds = 24 minutes):
    ; cd /path/to/sessions; find -cmin +24 | xargs rm
    ; PHP 4.2 and less have an undocumented feature/bug that allows you to
    ; to initialize a session variable in the global scope, albeit register_globals
    ; is disabled. PHP 4.3 and later will warn you, if this feature is used.
    ; You can disable the feature and the warning separately. At this time,
    ; the warning is only displayed, if bug_compat_42 is enabled.
    session.bug_compat_42 = 0
    session.bug_compat_warn = 1
    ; Check HTTP Referer to invalidate externally stored URLs containing ids.
    ; HTTP_REFERER has to contain this substring for the session to be
    ; considered as valid.
    session.referer_check =
    ; How many bytes to read from the file.
    session.entropy_length = 0
    ; Specified here to create the session id.
    session.entropy_file =
    ;session.entropy_length = 16
    ;session.entropy_file = /dev/urandom
    ; Set to {nocache,private,public,} to determine HTTP caching aspects
    ; or leave this empty to avoid sending anti-caching headers.
    session.cache_limiter = nocache
    ; Document expires after n minutes.
    session.cache_expire = 180
    ; trans sid support is disabled by default.
    ; Use of trans sid may risk your users security.
    ; Use this option with caution.
    ; - User may send URL contains active session ID
    ; to other person via. email/irc/etc.
    ; - URL that contains active session ID may be stored
    ; in publically accessible computer.
    ; - User may access your site with the same session ID
    ; always using URL stored in browser's history or bookmarks.
    session.use_trans_sid = 0
    ; Select a hash function
    ; 0: MD5 (128 bits)
    ; 1: SHA-1 (160 bits)
    session.hash_function = 0
    ; Define how many bits are stored in each character when converting
    ; the binary hash data to something readable.
    ; 4 bits: 0-9, a-f
    ; 5 bits: 0-9, a-v
    ; 6 bits: 0-9, a-z, A-Z, "-", ","
    session.hash_bits_per_character = 5
    ; The URL rewriter will look for URLs in a defined set of HTML tags.
    ; form/fieldset are special; if you include them here, the rewriter will
    ; add a hidden <input> field with the info which is otherwise appended
    ; to URLs. If you want XHTML conformity, remove the form entry.
    ; Note that all valid entries require a "=", even if no value follows.
    url_rewriter.tags = "a=href,area=href,frame=src,input=src,form=fakeentry"
    [MSSQL]
    ; Allow or prevent persistent links.
    mssql.allow_persistent = On
    ; Maximum number of persistent links. -1 means no limit.
    mssql.max_persistent = -1
    ; Maximum number of links (persistent+non persistent). -1 means no limit.
    mssql.max_links = -1
    ; Minimum error severity to display.
    mssql.min_error_severity = 10
    ; Minimum message severity to display.
    mssql.min_message_severity = 10
    ; Compatibility mode with old versions of PHP 3.0.
    mssql.compatability_mode = Off
    ; Connect timeout
    ;mssql.connect_timeout = 5
    ; Query timeout
    ;mssql.timeout = 60
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textlimit = 4096
    ; Valid range 0 - 2147483647. Default = 4096.
    ;mssql.textsize = 4096
    ; Limits the number of records in each batch. 0 = all records in one batch.
    ;mssql.batchsize = 0
    ; Specify how datetime and datetim4 columns are returned
    ; On => Returns data converted to SQL server settings
    ; Off => Returns values as YYYY-MM-DD hh:mm:ss
    ;mssql.datetimeconvert = On
    ; Use NT authentication when connecting to the server
    mssql.secure_connection = Off
    ; Specify max number of processes. -1 = library default
    ; msdlib defaults to 25
    ; FreeTDS defaults to 4096
    ;mssql.max_procs = -1
    ; Specify client character set.
    ; If empty or not set the client charset from freetds.comf is used
    ; This is only used when compiled with FreeTDS
    ;mssql.charset = "ISO-8859-1"
    [Assertion]
    ; Assert(expr); active by default.
    ;assert.active = On
    ; Issue a PHP warning for each failed assertion.
    ;assert.warning = On
    ; Don't bail out by default.
    ;assert.bail = Off
    ; User-function to be called if an assertion fails.
    ;assert.callback = 0
    ; Eval the expression with current error_reporting(). Set to true if you want
    ; error_reporting(0) around the eval().
    ;assert.quiet_eval = 0
    [COM]
    ; path to a file containing GUIDs, IIDs or filenames of files with TypeLibs
    ;com.typelib_file =
    ; allow Distributed-COM calls
    ;com.allow_dcom = true
    ; autoregister constants of a components typlib on com_load()
    ;com.autoregister_typelib = true
    ; register constants casesensitive
    ;com.autoregister_casesensitive = false
    ; show warnings on duplicate constant registrations
    ;com.autoregister_verbose = true
    [mbstring]
    ; language for internal character representation.
    ;mbstring.language = Japanese
    ; internal/script encoding.
    ; Some encoding cannot work as internal encoding.
    ; (e.g. SJIS, BIG5, ISO-2022-*)
    ;mbstring.internal_encoding = EUC-JP
    ; http input encoding.
    ;mbstring.http_input = auto
    ; http output encoding. mb_output_handler must be
    ; registered as output buffer to function
    ;mbstring.http_output = SJIS
    ; enable automatic encoding translation according to
    ; mbstring.internal_encoding setting. Input chars are
    ; converted to internal encoding by setting this to On.
    ; Note: Do _not_ use automatic encoding translation for
    ; portable libs/applications.
    ;mbstring.encoding_translation = Off
    ; automatic encoding detection order.
    ; auto means
    ;mbstring.detect_order = auto
    ; substitute_character used when character cannot be converted
    ; one from another
    ;mbstring.substitute_character = none;
    ; overload(replace) single byte functions by mbstring functions.
    ; mail(), ereg(), etc are overloaded by mb_send_mail(), mb_ereg(),
    ; etc. Possible values are 0,1,2,4 or combination of them.
    ; For example, 7 for overload everything.
    ; 0: No overload
    ; 1: Overload mail() function
    ; 2: Overload str*() functions
    ; 4: Overload ereg*() functions
    ;mbstring.func_overload = 0
    ; enable strict encoding detection.
    ;mbstring.strict_encoding = Off
    [FrontBase]
    ;fbsql.allow_persistent = On
    ;fbsql.autocommit = On
    ;fbsql.show_timestamp_decimals = Off
    ;fbsql.default_database =
    ;fbsql.default_database_password =
    ;fbsql.default_host =
    ;fbsql.default_password =
    ;fbsql.default_user = "_SYSTEM"
    ;fbsql.generate_warnings = Off
    ;fbsql.max_connections = 128
    ;fbsql.max_links = 128
    ;fbsql.max_persistent = -1
    ;fbsql.max_results = 128
    [gd]
    ; Tell the jpeg decode to libjpeg warnings and try to create
    ; a gd image. The warning will then be displayed as notices
    ; disabled by default
    ;gd.jpeg_ignore_warning = 0
    [exif]
    ; Exif UNICODE user comments are handled as UCS-2BE/UCS-2LE and JIS as JIS.
    ; With mbstring support this will automatically be converted into the encoding
    ; given by corresponding encode setting. When empty mbstring.internal_encoding
    ; is used. For the decode settings you can distinguish between motorola and
    ; intel byte order. A decode setting cannot be empty.
    ;exif.encode_unicode = ISO-8859-15
    ;exif.decode_unicode_motorola = UCS-2BE
    ;exif.decode_unicode_intel = UCS-2LE
    ;exif.encode_jis =
    ;exif.decode_jis_motorola = JIS
    ;exif.decode_jis_intel = JIS
    [Tidy]
    ; The path to a default tidy configuration file to use when using tidy
    ;tidy.default_config = /usr/local/lib/php/default.tcfg
    ; Should tidy clean and repair output automatically?
    ; WARNING: Do not use this option if you are generating non-html content
    ; such as dynamic images
    tidy.clean_output = Off
    [soap]
    ; Enables or disables WSDL caching feature.
    soap.wsdl_cache_enabled=1
    ; Sets the directory name where SOAP extension will put cache files.
    soap.wsdl_cache_dir="/tmp"
    ; (time to live) Sets the number of second while cached file will be used
    ; instead of original one.
    soap.wsdl_cache_ttl=86400
    ; available extensions
    ;extension=bcmath.so
    ;extension=bz2.so
    ;extension=calendar.so
    ;extension=curl.so
    ;extension=dba.so
    ;extension=dbase.so
    ;extension=exif.so
    ;extension=ftp.so
    ;extension=gd.so
    extension=gettext.so
    ;extension=iconv.so
    ;extension=imap.so
    ;extension=json.so
    ;extension=ldap.so
    ;extension=mcrypt.so
    ;extension=mime_magic.so
    ;extension=mysql.so
    ;extension=mysqli.so
    ;extension=ncurses.so
    ;extension=odbc.so
    ;extension=openssl.so
    ;extension=pdo.so
    ;extension=pdo_mysql.so
    ;extension=pdo_odbc.so
    ;extension=pdo_pgsql.so
    ;extension=pdo_sqlite.so
    ;extension=pgsql.so
    ;extension=posix.so
    ;extension=pspell.so
    extension=session.so
    ;extension=shmop.so
    ;extension=snmp.so
    ;extension=soap.so
    ;extension=sockets.so
    ;extension=sqlite.so
    ;extension=sysvmsg.so
    ;extension=sysvsem.so
    ;extension=sysvshm.so
    ;extension=tidy.so
    ;extension=xmlrpc.so
    ;extension=xsl.so
    ;extension=zip.so
    extension=zlib.so
    ; Local Variables:
    ; tab-width: 4
    ; End:
    my /etc/lighttpd/lighttpd.conf
    # lighttpd configuration file
    # use it as a base for lighttpd 1.0.0 and above
    # $Id: lighttpd.conf,v 1.7 2004/11/03 22:26:05 weigon Exp $
    ############ Options you really have to take care of ####################
    ## modules to load
    # at least mod_access and mod_accesslog should be loaded
    # all other module should only be loaded if really neccesary
    # - saves some time
    # - saves memory
    server.modules = (
    # "mod_rewrite",
    # "mod_redirect",
    # "mod_alias",
    "mod_access",
    # "mod_cml",
    # "mod_trigger_b4_dl",
    # "mod_auth",
    # "mod_status",
    # "mod_setenv",
    "mod_fastcgi",
    # "mod_proxy",
    # "mod_simple_vhost",
    # "mod_evhost",
    # "mod_userdir",
    # "mod_cgi",
    "mod_compress",
    # "mod_ssi",
    # "mod_usertrack",
    # "mod_expire",
    # "mod_secdownload",
    # "mod_rrdtool",
    "mod_accesslog" )
    ## a static document-root, for virtual-hosting take look at the
    ## server.virtual-* options
    server.document-root = "/home/lighttpd/html/"
    ## where to send error-messages to
    server.errorlog = "/var/log/lighttpd/error.log"
    # files to check for if .../ is requested
    index-file.names = ( "index.php", "index.html",
    "index.htm", "default.htm" )
    ## set the event-handler (read the performance section in the manual)
    # server.event-handler = "freebsd-kqueue" # needed on OS X
    # mimetype mapping
    mimetype.assign = (
    ".pdf" => "application/pdf",
    ".sig" => "application/pgp-signature",
    ".spl" => "application/futuresplash",
    ".class" => "application/octet-stream",
    ".ps" => "application/postscript",
    ".torrent" => "application/x-bittorrent",
    ".dvi" => "application/x-dvi",
    ".gz" => "application/x-gzip",
    ".pac" => "application/x-ns-proxy-autoconfig",
    ".swf" => "application/x-shockwave-flash",
    ".tar.gz" => "application/x-tgz",
    ".tgz" => "application/x-tgz",
    ".tar" => "application/x-tar",
    ".zip" => "application/zip",
    ".mp3" => "audio/mpeg",
    ".m3u" => "audio/x-mpegurl",
    ".wma" => "audio/x-ms-wma",
    ".wax" => "audio/x-ms-wax",
    ".ogg" => "application/ogg",
    ".wav" => "audio/x-wav",
    ".gif" => "image/gif",
    ".jar" => "application/x-java-archive",
    ".jpg" => "image/jpeg",
    ".jpeg" => "image/jpeg",
    ".png" => "image/png",
    ".xbm" => "image/x-xbitmap",
    ".xpm" => "image/x-xpixmap",
    ".xwd" => "image/x-xwindowdump",
    ".css" => "text/css",
    ".html" => "text/html",
    ".htm" => "text/html",
    ".js" => "text/javascript",
    ".asc" => "text/plain",
    ".c" => "text/plain",
    ".cpp" => "text/plain",
    ".log" => "text/plain",
    ".conf" => "text/plain",
    ".text" => "text/plain",
    ".txt" => "text/plain",
    ".dtd" => "text/xml",
    ".xml" => "text/xml",
    ".mpeg" => "video/mpeg",
    ".mpg" => "video/mpeg",
    ".mov" => "video/quicktime",
    ".qt" => "video/quicktime",
    ".avi" => "video/x-msvideo",
    ".asf" => "video/x-ms-asf",
    ".asx" => "video/x-ms-asf",
    ".wmv" => "video/x-ms-wmv",
    ".bz2" => "application/x-bzip",
    ".tbz" => "application/x-bzip-compressed-tar",
    ".tar.bz2" => "application/x-bzip-compressed-tar",
    # default mime type
    "" => "application/octet-stream",
    # Use the "Content-Type" extended attribute to obtain mime type if possible
    #mimetype.use-xattr = "enable"
    ## send a different Server: header
    ## be nice and keep it at lighttpd
    # server.tag = "lighttpd"
    #### accesslog module
    accesslog.filename = "/var/log/lighttpd/access.log"
    ## deny access the file-extensions
    # ~ is for backupfiles from vi, emacs, joe, ...
    # .inc is often used for code includes which should in general not be part
    # of the document-root
    url.access-deny = ( "~", ".inc" )
    $HTTP["url"] =~ "\.pdf$" {
    server.range-requests = "disable"
    # which extensions should not be handle via static-file transfer
    # .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi
    static-file.exclude-extensions = ( ".php", ".pl", ".fcgi" )
    ######### Options that are good to be but not neccesary to be changed #######
    ## bind to port (default: 80)
    #server.port = 81
    ## bind to localhost (default: all interfaces)
    #server.bind = "127.0.0.1"
    ## error-handler for status 404
    #server.error-handler-404 = "/error-handler.html"
    #server.error-handler-404 = "/error-handler.php"
    ## to help the rc.scripts
    server.pid-file = "/var/run/lighttpd.pid"
    ###### virtual hosts
    ## If you want name-based virtual hosting add the next three settings and load
    ## mod_simple_vhost
    ## document-root =
    ## virtual-server-root + virtual-server-default-host + virtual-server-docroot
    ## or
    ## virtual-server-root + http-host + virtual-server-docroot
    #simple-vhost.server-root = "/home/lighttpd/vhosts/"
    #simple-vhost.default-host = "www.example.org"
    #simple-vhost.document-root = "/htdocs/"
    ## Format: <errorfile-prefix><status-code>.html
    ## -> ..../status-404.html for 'File not found'
    #server.errorfile-prefix = "/usr/share/lighttpd/errors/status-"
    #server.errorfile-prefix = "/srv/www/errors/status-"
    ## virtual directory listings
    #dir-listing.activate = "enable"
    ## enable debugging
    #debug.log-request-header = "enable"
    #debug.log-response-header = "enable"
    #debug.log-request-handling = "enable"
    #debug.log-file-not-found = "enable"
    ### only root can use these options
    # chroot() to directory (default: no chroot() )
    #server.chroot = "/"
    ## change uid to <uid> (default: don't care)
    ## !!!! IF YOU CHANGE THE UID OR GROUPID apply the changes to /etc/logrotate.conf as well !!!
    server.username = "lighttpd"
    ## change uid to <uid> (default: don't care)
    server.groupname = "lighttpd"
    #### compress module
    compress.cache-dir = "/home/lighttpd/cache/"
    compress.filetype = ("text/plain", "text/html")
    #### proxy module
    ## read proxy.txt for more info
    #proxy.server = ( ".php" =>
    # ( "localhost" =>
    # "host" => "192.168.0.101",
    # "port" => 80
    #### fastcgi module
    ## read fastcgi.txt for more info
    ## for PHP don't forget to set cgi.fix_pathinfo = 1 in the php.ini
    fastcgi.server = ( ".php" =>
    ( "localhost" =>
    "socket" => "/var/run/lighttpd/php-fastcgi.socket",
    "bin-path" => "/usr/bin/php-cgi"
    #### CGI module
    #cgi.assign = ( ".pl" => "/usr/bin/perl",
    # ".cgi" => "/usr/bin/perl" )
    #### SSL engine
    #$SERVER["socket"] == "0.0.0.0:443" {
    # ssl.engine = "enable"
    # ssl.pemfile = "/home/lighttpd/ssl/server.pem"
    # server.errorlog = "/var/log/lighttpd/error-ssl.log"
    # accesslog.filename = "/var/log/lighttpd/access-ssl.log"
    # server.document-root = "/home/lighttpd/html-ssl"
    #### status module
    #status.status-url = "/server-status"
    #status.config-url = "/server-config"
    #### auth module
    ## read authentication.txt for more info
    #auth.backend = "plain"
    #auth.backend.plain.userfile = "lighttpd.user"
    #auth.backend.plain.groupfile = "lighttpd.group"
    #auth.backend.ldap.hostname = "localhost"
    #auth.backend.ldap.base-dn = "dc=my-domain,dc=com"
    #auth.backend.ldap.filter = "(uid=$)"
    #auth.require = ( "/server-status" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "user=jan"
    # "/server-config" =>
    # "method" => "digest",
    # "realm" => "download archiv",
    # "require" => "valid-user"
    #### url handling modules (rewrite, redirect, access)
    #url.rewrite = ( "^/$" => "/server-status" )
    #url.redirect = ( "^/wishlist/(.+)" => "http://www.123.org/$1" )
    #### both rewrite/redirect support back reference to regex conditional using %n
    #$HTTP["host"] =~ "^www\.(.*)" {
    # url.redirect = ( "^/(.*)" => "http://%1/$1" )
    # define a pattern for the host url finding
    # %% => % sign
    # %0 => domain name + tld
    # %1 => tld
    # %2 => domain name without tld
    # %3 => subdomain 1 name
    # %4 => subdomain 2 name
    #evhost.path-pattern = "/home/lighttpd/vhosts/%3/htdocs/"
    #### expire module
    #expire.url = ( "/buggy/" => "access 2 hours", "/asdhas/" => "access plus 1 seconds 2 minutes")
    #### ssi
    #ssi.extension = ( ".shtml" )
    #### rrdtool
    #rrdtool.binary = "/usr/bin/rrdtool"
    #rrdtool.db-name = "/var/lib/lighttpd/lighttpd.rrd"
    #### setenv
    #setenv.add-request-header = ( "TRAV_ENV" => "mysql://user@host/db" )
    #setenv.add-response-header = ( "X-Secret-Message" => "42" )
    ## for mod_trigger_b4_dl
    # trigger-before-download.gdbm-filename = "/var/lib/lighttpd/trigger.db"
    # trigger-before-download.memcache-hosts = ( "127.0.0.1:11211" )
    # trigger-before-download.trigger-url = "^/trigger/"
    # trigger-before-download.download-url = "^/download/"
    # trigger-before-download.deny-url = "http://127.0.0.1/index.html"
    # trigger-before-download.trigger-timeout = 10
    ## for mod_cml
    ## don't forget to add index.cml to server.indexfiles
    # cml.extension = ".cml"
    # cml.memcache-hosts = ( "127.0.0.1:11211" )
    #### variable usage:
    ## variable name without "." is auto prefixed by "var." and becomes "var.bar"
    #bar = 1
    #var.mystring = "foo"
    ## integer add
    #bar += 1
    ## string concat, with integer cast as string, result: "www.foo1.com"
    #server.name = "www." + mystring + var.bar + ".com"
    ## array merge
    #index-file.names = (foo + ".php") + index-file.names
    #index-file.names += (foo + ".php")
    #### include
    #include /etc/lighttpd/lighttpd-inc.conf
    ## same as above if you run: "lighttpd -f /etc/lighttpd/lighttpd.conf"
    #include "lighttpd-inc.conf"
    #### include_shell
    #include_shell "echo var.a=1"
    ## the above is same as:
    #var.a=1
    DAEMONS=(syslog-ng iptables network netfs crond sshd lighttpd)
    Did I do anything wrong, is this how it's supposed to work? I googled the error from lighttpd error.log and the only useful information I could find was in polish i think, and unfortunately, i don't speak polish.
    -Zack
    Last edited by Sjoden (2008-05-28 22:00:37)

    ls -l /var/run/lighttpd/
    And how are you spawning the php instances? I don't see that in the daemons array anywhere.
    EDIT: It looks like the info in that page is no longer using pre-spawned instances, but lighttpd adaptive-spawn. The documentation has been made inconsistent it looks like.
    You will note that with pre-spawned information, the config looks different[1].
    You need to do one or the other, not both (eg. choose adaptive-spawn, or pre-spawn..not both).
    [1]: http://wiki.archlinux.org/index.php?tit … oldid=8051 "change"

  • AS2 contact form and php - works fine but only sends half of the text in the comments field ???

    hi all - i have an AS2 contact form using php to send the info to my email address - it all works fine except this ..... rather than having an empty comments box in the flash movie i had added a whole bunch of feedback questions that the user can comment yes/no to in the comments box (my feedback questions were added into the input text box in cs3 so are there when the user opens the contact page .. i have set the maximum characters to 10000 so no worries that its that that is stopping it all coming through in the email ..... basically when i go to my form online and send it i get it through as an email but with only three quarters of the feedback text in it ...... i have tried a zillion ways a round this, tried other contact forms and php and always end up with the same problem ... any ideas any one ?
    this is the AS....
    stop();
    a =0;
    function validate () {
        if (from.length>=7) {
            if (from.indexOf("@")>0) {
                if ((from.indexOf("@")+2)<from.lastIndexOf(".")) {
                    if (from.lastIndexOf(".")<(from.length-2)) {
                        a = 1;
                        // email is fine
    function formcheck () {
        validate ();       
        trace(a);
        if (fname = "" or telno eq "" or comments eq "" or from eq "") {
            stop();
            error = "You have left blank fields, please fill in all fields, thank you";
        } else {
            emailcheck ();
    function emailcheck (){
        if (a != 1){
            stop();
            error = "Email address not valid";
            } else {
            loadVariablesNum("mail.php3", 0, "POST");
            gotoAndStop(2);
    ..........this is the php
    <?php
    $adminaddress = "[email protected]";
    $sitename = "Flash Site Form Mailer";
    mail("$adminaddress","Info Request",
    "A customer at $sitename has made the following enquiry\n
    First Name: $name
    Company Name: $company
    Telephone: $telno
    Email: $from\n
    The visitor commented:
    $comments
    Logged Info :
    Using: $HTTP_USER_AGENT
    Hostname: $ip
    IP address: $REMOTE_ADDR
    Date/Time:  $date","FROM:$adminaddress");
    ?>
    any help much appreciated

    i think you should not use $HTTP_USER_AGENT.
    and use loadvars instead of loadvariablesnum:
    stop();
    a =0;
    function validate () {
        if (from.length>=7) {
            if (from.indexOf("@")>0) {
                if ((from.indexOf("@")+2)<from.lastIndexOf(".")) {
                    if (from.lastIndexOf(".")<(from.length-2)) {
                        a = 1;
                        // email is fine
    function formcheck () {
        validate ();       
        trace(a);
        if (fname = "" or telno eq "" or comments eq "" or from eq "") {
            stop();
            error = "You have left blank fields, please fill in all fields, thank you";
        } else {
            emailcheck ();
    var sendLV:LoadVars=new LoadVars();
    function emailcheck (){
        if (a != 1){
            stop();
            error = "Email address not valid";
            } else {
    sendLV.name=fname;
    sendLV.telno=telno;
    sendLV.company=company;  //assuming company is a variable in your flash
    sendLV.comments=comments;
    sendLV.send("mail.php3", "POST");
            gotoAndStop(2);
    //..........this is the php
    <?php
    $adminaddress = "[email protected]";
    $sitename = "Flash Site Form Mailer";
    $from=?;//you need to define this variable
    $name=$_POST['name'];
    $telno=$_POST['telno'];
    $company=$_POST['company'];
    $comments=$_POST['comments'];
    $body=
    "A customer at $sitename has made the following enquiry\n
    First Name: $name
    Company Name: $company
    Telephone: $telno
    Email: $from\n
    The visitor commented:
    $comments";
    mail($adminaddress,"Info Request",$body);
    ?>

  • Apache 1.3.33 and PHP 4.3.11 compiled in

    The package
    Here are the good stabile versions of both Apache and PHP including the following stuff:
    - support for these databases: mysql, postgresql, firebird
    - gdi support
    - mod_ssl along with a dummy certificate
    - eaccelerator for PHP and the default configuration for it
    - mod_gzip for pages compression
    - mod_security for ids system (see Snort and making its rules compatible with mod_security). Also remember to disable rules if you get problems with PHP developement. mod_security tends to be too aggressive at first with these default rules.
    The files
    PKGBUILD
    httpd
    apache13.install
    http.conf.d
    httpd.conf.mod_gzip
    httpd.conf.regression-v2
    httpd.logrotate
    Done
    02.05.2005
    - fixed apache13.install to properly stop the server before unistall
    - set eaccelerator to be configured more like it is in cactus's package
    01.05.2005
    - backing up etc/php.ini and etc/httpd/conf/httpd.conf
    - added logrotate support code from Judd's package
    - phpize is now called from startdir instead of /usr/bin/phpize for eaccelerator
    30.04.2005
       - the package depends now on my firebirddb package. It was needed because
    libgds.so is needed when firebird support is compiled in
       - disabled imagick for the time being - got to find out how to make it compile properly by default
       - cleaned up the code that sets up php (the manual file copying doesn't seem to be needed anymore with 4.3.11)
       - made phpize to be called from ${startdir}
       - set mod_security filtering to Off as default
    29.04.2005 - updated php to v. 4.3.11
       - Tested using Gallery 1.4.4-pl5 and my own project (a lot of database activity and file handling)
    28.04.2005
       - fixed eaccelerator and it now works (php.ini had eaccelerator's settings inserted wrong way with "-marks). The execution of some scripts that took before 0.075 - 0.09 seconds now only takes 0.03-0.04
    27.04.2005
       - cleaned up code a bit and old comments and disabled cookie format checking for mod_security that was causing 500 error
    Todo and thoughts
    <i>10.05.2005</i> - found a great guide about securely setting up apache and php
    - it would be really great to implement a curses-based configuration where the PKGBUILD would be edited according to choices the users makes (because there are changes needed in many parts of the file) - this way the package would really be for everyone
    - deleting default apache manual
    - to get imagick to compile- graphicsmagick installation to work properly or to make it optional
    (ignore the text about graphicmagic in PKGBUILD - it was just for my own tests)

    I built it today and tested again and compiling part went just fine. Only apache13.install was missing - it had pre-remove commands (if server is already running to stop it). Then removed the older same package (pacman -R) and replaced it with the new one. Then started up apache and had 500 error - it was caused by mod_security. Turned off cookie filter in httpd.conf.regression-v2 (SecFilterCheckCookieFormat Off) and then it started up fine.
    The eaccelerator did not appear on php info page, so got to fix setting it up... Please let me know what else seems suspicious to you and what might cause errors.

  • Need Urgent Help with Apache and PHP

    I have been struggling with apache and php for a week now and I finally broke down to post a message.
    I have apache 1.3 running on my mac mini g4 with 10.4.9 and I installed sql. I went to the entropy website and downloaded php5 to install without knowing I already had php4 on the machine. I installed 5 but could not get it to work. I then went back to httpd.conf and tried to install php4 by uncommenting out the loadmodule and addmodule lines. I restarted apache but php still did not work. I tested the phpinfo.php script but all I got was the script in Safari and not the actual page. At the moment, I have php4 and php5 on my machine but can't get either one to work. I am sure there is an easy fix but I don't know it. Please help.

    The problem is not terribly complicated, but Apache will not start with the entropy file in the folder
    /etc/httpd/users/
    Let me experiment on you. Rename the entropy file and then try to start Apache. To do this, open Terminal and paste this command:
    <pre>sudo mv /etc/httpd/users/+entropy.conf /etc/httpd/users/+entropy<pre>
    Now check the Apache configuration:
    <pre>apachectl configtest<pre>
    If it says "Syntax OK", start Apache:
    <pre>sudo apachectl start<pre>
    Since we only disabled the entropy file, you should be able to enable PHP5 with some more advanced configuring.

  • My nodejs and php component is ready but how will we insert in eloqua for all users?

    Hi there,
    my nodejs and php component is ready but how will we insert in eloqua for all users?
    Thanks

    Hi there,
    Please help me.

  • How to create a dynamic newsflash using dreamweaver and PHP

    Hi there,
       I would like to create a dynamic newsflash using dreamweaver and PHP in that the newsflash will be pulling information from a MySQL database. The newsflash should also have a link to view more information about the piece of news a user wants to know more about. Which tools do I need to use in dreamweaver and how's the procedure to go about that. Any advice is highly appreciated. Thanx in advance!

    I think you´ll need at least a MySQL table with the following columns:
    - id (primary key, int, auto_increment etc)
    - news_headline (varchar)
    - news_teaser (text)
    - news_content (text)
    What I´d personally add are columns such as:
    - news_date (date or datetime)
    - news_external_link (varchar), if a "read more..." link is supposed to navigate to an external URL rather than displaying the contens of the "news_contents" column.
    Based on such a MySQL table it should be easy to use Dreamweavers standard Server Behaviors to create the usual datalist.php, insert.php, update.php and delete.php documents, and there are numerous tutorials out there which will teach you how to do that.
    Am I right when assuming that you´ll also need to know how to automatically pull, say, the 5 most recent news records from the database ?

  • Populating a Combobox using Remoting with AMF and PHP

    Hello all
    I am using Zend framework and Flex 3.4 to create a webapp. I am stuck at how to populate a combobox dynamically using the service I created in PHP.
    In some of examples I saw that result of database query was being converted into XML and then sent to Flex. This seems a little too time-consuming if I have to do it every time. I saw some examples in Adobe Docs about Remoting with AMF and PHP. That seems like a better approach although how it would be applicable here is beyond me right now.
    Can somebody guide me in correct direction?
    Thanks and Regards
    Shivik

    Try this: http://code.google.com/p/as3flexdb/ is very easy to use and it
    will help.
    All you need to populate a combo is:
    <mx:ComboBox dataProvider="{query.Records} /

  • Flash not rendering correctly in IE using Spry and SWFObject.

    Hi,
    Tools that I'm using (Flash, Spry and SWFObject)
    I just finished converting portions of the image gallery to a
    video gallery using FLV Files.
    It works great in FireFox and Opera, I guess all mozilla
    based browsers.
    Now my problem is that I pass the Path variable to Flash for
    it to load the FLV file using SWFObject.
    Code:
    <div spry:detailregion="dsVideos"
    class="AccordionPanelContent">
    <div id="flashcontent"> You need to upgrade your Flash
    Player. </div>
    <script type="text/javascript">
    // <![CDATA[
    var so = new SWFObject("VideoPlayer.swf", "videoplayer",
    "427", "288", "8", "#161616");
    so.addVariable("video", "{@path}");
    so.write("flashcontent");
    // ]]>
    </script>
    </div>
    The FLV files won't load at all in IE meaning the variable is
    not going thru when Flash is rendered for a second time.
    So I added another variable just to see Flash reaction once
    the page loaded for the first time.
    Code:
    so.addVariable("Variable1", "I Love This Bug!");
    I added Variable1 to the Flash Movie as a textbox and It
    loads in a split second for the first render but when Spry loads it
    datasets and renders the region where Flash resides the variable
    doesnt go thru and Flash gets a undefined variable.
    When Spry renders that region the video variable is not going
    thru and no video is shown. :(
    Any suggestion?

    Don -
    Have you had any success here? I've been trying to get any
    kind of Flash
    to load properly in IE in a spry:region (or :detailregion),
    and have
    failed entirely.
    I added spry:state="ready" to the div with the Flash movie,
    but no fix.
    I've tested with both IE 6 and IE 7 beta, and with FP 8 and
    FP 9.
    I have a few test pages (everything works great in FireFox):
    - www.imagicdigital.com/portfolios/video_state7.html
    (uses SWFObject to write the movie, with spry info as
    FlashVars)
    IE: Flash movie is hidden. No FlashVars are passed.
    - www.imagicdigital.com/portfolios/video_state7_noso.html
    (same page as above, but with the standard Object/Embed tags,
    no SWFObject)
    IE: Flash movie is hidden. No FlashVars are passed.
    - www.imagicdigital.com/portfolios/video_state7a_noso.html
    (same page as above but with hardcoded FlashVars)
    IE: Flash movie is hidden. No FlashVars are passed.
    - www.imagicdigital.com/portfolios/video_state7b_noso.html
    (a Flash movie with no FlashVars at all)
    IE: Flash movie is hidden.
    - www.imagicdigital.com/portfolios/video_state7c_noso.html
    (same as 7a but with spry:region removed from the flash div)
    IE: Works perfectly. Flash movie shows up, FlashVars are
    passed.
    I noticed a few things:
    - In IE, the spry:debug generated markup shows FlashVars="",
    empty.
    - I don't see an innerHTML fix call for the FlashVideo div,
    even if I
    make it into a spry:region instead of detailregion. Can this
    help omehow?
    - In IE 7, if I right-click where my flash movie is supposed
    to show up,
    it does become visible (with no FlashVars). However, IE often
    crashes
    after that, either right away or on window close. The error
    shown in
    the alert is "Out of Memory at Line 56". This is both with
    and without
    passing FlashVars.
    NOTE: This error was just recently discussed on the SWFObject
    mailing
    list. Geoff Stearns found a sort of bug in FP 9 that was also
    causing
    this same error when 2 Flash movies were embedded with
    SWFObject and
    each making different ExternalInterface calls. He fixed it by
    removing
    the function written by Flash when it loads called
    "__flash_unloadHandler()". Link to the relevant discussion
    thread:
    http://lists.deconcept.com/htdig.cgi/swfobject-deconcept.com/2006-July/000795.html
    It would be great (crucial, I think) to get Spry to work with
    SWFs. Any
    ideas or progress? Thanks in advance.

  • SQLite and PHP - Why doesn't this work?

    I've noticed that, with the bundled installs of SQLite3 and PHP, SQLite seems not to work. Checking phpinfo(), I noticed that the linked library is of version 2, but SQLite 2 is not bundled.
    I've tirelessly searched the net, but this issue seems largely undocumented. Short of compiling my own version of PHP (I'd rather not), is there any solution to 'upgrade' the SQlite library in PHP?

    I wrote a little PHP script to create a SQLite database, load a few records and print them in a web browser. Works fine. From the terminal, the sqlite3 command will open the db but even just trying to list the .databases will produce Error: file is encrypted or is not a database. The PHP script is creating a SQLite2 database. You can open the db in TextWrangler or BBEdit to see the version number. I guess we will have to wait for a version of PHP that is compatible with SQLite3.

Maybe you are looking for