Sql 2005 login error

Post Author: dmccahanpppa
CA Forum: General
We are migrating from JD Edwards on AS400 to Microsoft Dynamics GP on SQL 2005. I can create and refresh reports without problem using sa as the login account in Crystal. When I use any of the users created in Dynamics GP (as they have to for users to access GP) I get a login error from the SQL server. This is using the same ODBC connection and I have taken some of the users and elevated there permission on the GP database and/or overall sql server to even dbo and sysadmin and still cannot get any login other than sa to work. Any sql GURUs out there that can tell me what I'm missing?
Thanks

Post Author: dmccahanpppa
CA Forum: General
I have tried creating ODBC connections (and also found a business objects article on OLE DB and tried that) with SQL Authentication and also with windows. I have made sure my users have usernames in GP that are all lower case name and password. The only thing that is getting me close is to use windows authentication on the odbc connection, set the odbc connection to a specific sql database, and give the users windows read permissions to that database. As a domain admin this gives complete access. With the users the login error goes away but I only see stored procedures and not the tables or views. I'm trying to find the minimum access to give the users in windows to allow windows authentication to work.
What I don't understand is why this should be so difficult to find the correct answer on. I have the same issue on a very plain install (everything on the server, sql, gp, and crystal) with just microsoft's test company and data as I do the production system (gp and sql on one server and citrix client and crystal on another). I setup the test server (a couple of times blew the whole thing away and rebuilt following gp procedures) and consultants built the production environment. You would think Microsoft (since they blow their marketing horn about how Crystal Reports works with GP) or Business Objects would have the user and odbc setup for this documented.
Ok...so I'm a bit delusional....

Similar Messages

SQL 2005 Insert Error

Hi Folks-
It has been a while and I hope this finds you all doing well.
I am working oin a customer application and we are experiencing intermitment MS SQL 2005 insert errors. We have isolated the cause as the use of the special character, the apostrophe (i.e. " " ") in a material/item description. The underlying MES application can accept the apostrophe along with the SAP MM back-end, but not MII, The MII version is 12.0.6 Build 14. The application also uses the Java Plug-in version 1.6.0_07, which is also the Java Runtime version. I am not sure of the SQL jdbc being used but was hoping that perhaps there was a version that could "handle" this special character issue or if there was a non-programmatic way to address this. At this point we are anxious about changing Master Data.
Any insights or suggestions would be appreciated. Thanks in advance and I look forward to your responses.
Kevin Fitzgerald
Invensys Operation Management

Hi Kedar-
This is great information and I thank you for your insights. I do have what I hope are 2 brief follow-on questions:
1. Does the single quote/apostrophe represent a general escape character that can be used in all cases? Are there others (i.e. \n, etc.)
2. Your special characters cited above do not include the asterik, *. My customer has also decided to use this special character in a new product description (go figure!!). Can this be "escaped out" via the same means?
I have been able to successfully use the java function stringreplace to alter the text as you suggest- even for a local and I hope transaction variable. Any additional comments per my questions above would certainly advance the cause.
Thanks again and I look forward to your comments. Take care and be safe.
Kevin

SQL 4060 Login Error

<p>We have recently released a couple of new reports, but have discovered that although the reports run fine when launched in WEBi, whenever we try to refresh the report we fail with a SQL 4060 Login failed error message. This occurs in WEBi and BO. The reports run fine when logged into a 'Supervisor' level account.</p><p>We've reviewed user permissions, but can't seem to find the cause of this issue.</p><p> Any ideas?</p>

Post Author: dmccahanpppa
CA Forum: General
I have tried creating ODBC connections (and also found a business objects article on OLE DB and tried that) with SQL Authentication and also with windows. I have made sure my users have usernames in GP that are all lower case name and password. The only thing that is getting me close is to use windows authentication on the odbc connection, set the odbc connection to a specific sql database, and give the users windows read permissions to that database. As a domain admin this gives complete access. With the users the login error goes away but I only see stored procedures and not the tables or views. I'm trying to find the minimum access to give the users in windows to allow windows authentication to work.
What I don't understand is why this should be so difficult to find the correct answer on. I have the same issue on a very plain install (everything on the server, sql, gp, and crystal) with just microsoft's test company and data as I do the production system (gp and sql on one server and citrix client and crystal on another). I setup the test server (a couple of times blew the whole thing away and rebuilt following gp procedures) and consultants built the production environment. You would think Microsoft (since they blow their marketing horn about how Crystal Reports works with GP) or Business Objects would have the user and odbc setup for this documented.
Ok...so I'm a bit delusional....

SQL 2005 datasource error--LoginModules

ColdFusionMX7 & SQL server 2005 running on T60p IBM
Thinkpad under Windows XP sp2....after ensuring sql confiq allows
TCP/IP and mixed auth chosen...Unable to create datasource in Admin
to SQL 2005 database, returning error: "No LoginModules configured
for JDBC_Driver_1"
I didn't see anything in either the forums or knowledgebase
about this. Any ideas?
charlie cousins out of NE Washington, where the skies are
finally blue

The TCP/IP is enabled and the server is set for mixed mode
auth. I believe this particular issue is java-related, since
LoginModule appears to be a function or method. And it may be
related to the arcane security built into my rig by IBM (embedded
security chip and all that). I've tried installing the sqljdbc.jar
driver from MS--but no luck with that, either.
One reply to Ben Forta's post in January did reference the
same problem, but I didn't see any followup on that.
I have no problem building ODBC or connecting to various SQL
2005 db's out of various parts of VS2005, but then I'm not using
TCP as the approach there or a java-based product as the connection
point.

Sender CC for MS SQL 2005 Driver error invalid object name

Hello people,
can some one help me with the following problem?
I'm trying to implement a JDBC to IDoc XI/PI scenario with PI 7.1.
In RWB CC monitor i'm getting the following error : "Database-level error reported by JDBC driver while executing statement 'SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0''. The JDBC driver returned the following error message: 'com.microsoft.sqlserver.jdbc.SQLServerException: Invalid object name 'SAP_SALES_TRANS_PAYMENTS'.'. For details, contact your database server vendor".
Communication channel configuration:
JDBC Driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
Connection: jdbc:sqlserver://<IP>:1433;databaseName=<DB Name>
Query SQL Statement is : "SELECT * FROM SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'"
Update SQL Statement: "UPDATE SAP_SALES_TRANS_PAYMENTS SET TRANSFERRED_FLAG='1' WHERE TRANSFERRED_FLAG='0'"
The name of the database is 'SAP_SALES_TRANS_PAYMENTS', is checked. Are the table name and/or table fields names key sensitive?
The MT definition is identical with the data base table.
Thanks Stefanos

Hello,
this issue is solved now.
The problem was in the name of the database table. The Database was created for more then one
company codes (by an other partner company ) and the full/right name in the query is
SELECT * FROM dbo.<company_code>$SAP_SALES_TRANS_PAYMENTS WHERE TRANSFERRED_FLAG='0'
Best regards
Stefanos

ERROR – SQL Server Login Failed, Error 11001

We have an application that uses MSDE as its ‘Back-end’.
It has been working fine for years. We have however had to recently re-build the Operating System on our own Server that it was running on.
Original O/S Environment
We used Windows Server 2008 r2, using
Hyper-V to run Windows Server 2003 so that we can use
MSDE to run our application.
We do not want to change to later versions of SQL Server Express as they no-longer support Replication.
NEW O/S Environment
When we re-built the Server we went for Windows Server 2008 r2, using
Hyper-V to run Windows 7 Enterprise so that we can use
MSDE to run our application.
We have used this setup many times before and know that MSDE runs quite happily under Windows 7.
Servers have been renamed
The real Windows Server 2008 r2 machine used to be called FILESERVER.
It is now called FILE-SERVER.
The virtual machine running our application was originally called GEMSERVER.
It is now called GEM-SERVER.
What’s happening on the Server
The application is running fine. We can access the underlying MDSE Database with SQL Server 2005 Management Studio Express without problem.
We can build a test ODBC Data Source and connect to the ‘SQL Server’ Database, again without problems.
What’s happening on the Client PC
The application does not connect. I get:
     An error occurred while connecting.
     [DBNETLIB]ConnectionOpen (Connect())SQL Server does not exist
     or access denied.
When I build a ODBC Data Source to test the Connection I get:
Microsoft SQL Server Login
Connection failed:
     SQLState: '01000'
     SQL Server Error: 11001
     [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]ConnectionOpen
     (Connect()).
     Connection failed:
     SQLState: '08001'
     SQL Server Error: 6
     [Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]Specified SQL
     server not found
I can Ping GEM-SERVER from the Client PC without problems.
I have disabled Firewalls an Anti-Virus Software on both the GEM-SERVER and the Client PC – to no avail.
I’ve tried connecting with:
Named Pipes,
TCP/IP,
IP Address of GEM-SERVER – 192.168.16.122,
Using Specific Port 1433 in connection.
NONE of it worked. L
ANYBODY any ideas what to try next?

Here's the solution that we came up with to our own problem:
This problem was actually caused by a bug in our own Application.
For some reason when we restored our MDSE Database the correct SQL Server Access Protocols were not setup correctly. (It is designed to handle these setup issues for us and has done so previously.)
We still have to determine why it happened and rectify the problem within our Software.
However to correct the problem with our own 'Server' we had to manually:
Run netsvrcn.exe using command prompt as an Administrator on the ‘Server’ running the MSDE Database,
Enable TCP and NAMED PIPES protocol
Restart SQL Server instance
Exclude the ports SQL Server normally listens on, from the firewall using ‘Windows Firewall Advanced Security’ for both in-bound and out-bound rules:
1433 TCP port
1434 UDP port
We then tested the ODBC connection from client machine and found that it worked fine, as indeed did our application.
However we still have a residual problem.
For we cannot connect to our Server called GEM-SERVER using GEM-SERVER\GEMSQLSRVR we have had to use 192.168.16.122\GEMSQLSRVR.
We are not sure why. We obviously wish to use the machine’s name rather than its IP Address, as its IP Address is dynamically assigned by a DHCP server so may change in future.
Do I need to raise this remaining problem as a separate issue?

SQL 2005 cluster rejects SQL logins when in failed over state

When SQL 2005 SP4 on Windows 2003 server cluster is failed over from Server_A to Server_B, it rejects all SQL Server logins. domain logins are OK. The message is "user is not associated with a trusted server connection", then the IP of the
client. This is error 18452. Anyone know how to fix this? They should work fine from both servers. We think this started just after installing SP4.
DaveK

Hello,
The connection string is good, you're definitely using sql auth.
LoginMode on Server_B is REG_DWORD 0x00000001 (1) LoginMode on Server_A is REG_DWORD 0x00000002 (2) Looks like you are on to something. I will schedule another test failover. I assume a 2 is mixed mode? If so, why would SQL allow two different modes
on each side of a cluster?
You definitely have a registry replication issue, or at the very least a registry that isn't in sync with the cluster. This could happen for various reasons, none of which we'll probably find out about now, but never the less...
A good test would be to set it to windows only on Node A, wait a minute and then set it to Windows Auth and see if that replicates the registry setting across nodes correctly - this is actually the windows level and doesn't have anything to do with SQL Server.
SQL Server reads this value from the registry and it is not stored inside any databases (read, nothing stored in the master database) as such it's a per machine setting. Since it's not set correctly on Node B, when SQL server starts up it correctly reads
that registry key and acts on it as it should. The culprit isn't SQL Server, it's Windows Clustering.
Hopefully this makes a little more sense now. You can actually just edit the registry setting to match Node A and fail over to B, everything should work correctly. It doesn't help you with a root cause analysis which definitely needs to be done as who knows
what else may not be correctly in sync.
Sean Gallardy | Blog |
Twitter

Error in Upgrading to MS SQL 2005

i have Nw2004 installed wiht MS SQL 2000 as database.
Iam in the process of upgrading this server to NW2004s.
As a pre-requisite i upgraded the MS SQL 2000 to MS SQL 2005 Server
But after upgradation of MS SQL only(NW2004 is there) when i start the SAP Instance the SAP Instance is starting.
but when i login to SAP and run any transactions it is giving a message
START_CALL_SICK.
Please let me know whether i can run MS SQL 2005 server with NW2004

hello Balaji,
You can ignore this error. Basically just restart the system. I would say reboot the machine. restart database and then SAP. However before that execute the transaction SICK and look for any errors.If there are any error then you need to solve them. May be you can paste them here. MS SQL 2005 is supported with Netwaeaver 04.
Check this:
https://websmp104.sap-ag.de/platforms
Regards.
Ruchit.
Message was edited by:
Ruchit Khushu

SAP IDES ECC5.0 (SQL 2005 Database) installation Error at Database instan.

At the time IDES ECC 5.0 installation (SQL 2005 database), I was copy all DVD on Hard drive and start setup then at installation of database instance, following Errors are occured. so I cant continue with the installation, if anyone have installation guide/or solve the following error please mail me at [email protected]
from Log file SAPCLUST
Interface access functions from dynamic library dbmssslib.dll loaded.myCluster
(3.5.Imp): 613: error when retrieving table description for physical table AABLG.
myCluster (3.5.Imp): 614: return code received from nametab is 32
myCluster (3.5.Imp): 296: error when retrieving physical nametab for table AABLG.
(CNV) ERROR: code page conversion failed
rc = 2
from sappool.log
Interface access functions from dynamic library dbmssslib.dll loaded.failed to read short nametab of table ARCH_NUM (rc=32)conversion failed for row 0 of table VARKEY = ⁘
(CNV) ERROR: code page conversion failed
So please send me solution/ or any configuration need for SQL 2005 / installation guide thanks

This may be hard disk problem, some file not able to write on HDD.
Regards
Rajnish

SQL 2005 SAP R/3 4.6C - DBSL error RC=99 on import of Basis 4.6C SP 39

Hi,
I have just built a R/3 4.6C system on SQL 2005 with 4.6D_EXT kernel. The build was done using R3load to export from the 4.6C/SQL 2000/32bit system and import to 4.6C/SQL 2005/64bit system. The source 4.6C system only had Basis support package 37 applied, and I am trying to apply Basis 4.6C 38-57 on the 4.6C/SQL 2005/64bit system (in preparation for an ECC6 upgrade) and I get the following error:
EXEC SQL: SELECT ID,OBJECT,LANGU,TYP,VERSION FROM DOKIL WHERE (LANGU IN (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,
[developertra,00000] ExecuteAndFlush return code: 0x80040e10 Stmt: [CREATE PROCEDURE ##Y8IBASAPDEIBD00000025600000000006164133 @P
                                                                          99972 0.099972
[developertra,00000] MapHr:80040E10 DB_E_PARAMNOTOPTIONAL                  43 0.100015
[developertra,00000] HandleOledbError [ExecuteAndFlush,line 33423]: Error/Message: (err 0, sev 0), No value given for one or more
                                                                             96 0.100111
[developertra,00000] DbSlPrepare - Error 99 (dbcode -2147217904) on proc. creation
56 0.100167
[developertra,00000] DbSlPrepare - <CREATE PROCEDURE ##Y8IBASAPDEIBD00000025600000000006164133 @P000 varchar(3072) = ' ', @P001 v
                                                                            105 0.100272
[developertra,00000] 1 times error (0,0) in sequence                       30 0.100302
[developertra,00000] dbdsmss: DBSL99 SQL0                                  27 0.100329
[developertra,00000] No value given for one or more required parameters.
62 0.100391
[dbds        ,00589] ***LOG BY2=>sql error 0          performing FET
66 0.100457
[dbds        ,00589] ***LOG BY0=>No value given for one or more required parameters.
I have checked the collation setting in SQL 2005 and it is:
select serverproperty('collation')
SQL_Latin1_General_CP850_BIN2
There are 97000 odd entries in DOKIL, so I don't think that is the problem.
Would appreciate any assistance.
Kind regards,
Sheryl.

Hi ,
Instead of doing the build with export import, you can try to do the same with backup restore,,
But remember your sql2000 should be on bin2... then you can take backup and restore.
Since it is from 2000 to 2005 the restore would happen and it will work fine.
Try this and check out, since the error you have pasted is not clearly giving any picture...
Regards,
Ravi.

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Connecting to SQL 2005 from Oracle error

I have an Oracle Database and SQL Database on the same server and wants to use odbc to connect to the SQL 2005 database and query tables of my choice.
I did configured the ODBC correctly and called the DSN TSH_ARCHIVE. I have tested it and it works great. But each time I run the following query I get error:
SQL> select count(*) from BALANCES_HS@tse_archive;
select count(*) from BALANCES_HS@tse_archive
ERROR at line 1:
ORA-12154: TNS:could not resolve the connect identifier specified
Any suggestion and help will be greatly appreciated.
Edited by: azaza on Jan 28, 2010 6:32 AM

Hi,
Thanks for the files.
There are some problems with the configuration.
listener.ora -
LISTENERTSE_ARCHIVE =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST = xxxxx.ita.doc.gov)(PORT=1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER=
(SID_LIST=
(SID_DESC=
(SID_NAME=TSE_ARCHIVE)
(ORACLE_HOME=J:\app\product\11.1.0\db_2)
(PROGRAM=hsodbc)
(SID_DESC=
(SID_NAME=tpisdb06)
(ORACLE_HOME=J:\app\product\11.1.0\db_2)
This should be -
LISTENERTSE_ARCHIVE =
(ADDRESS_LIST=
(ADDRESS=(PROTOCOL=tcp)(HOST = xxxxx.ita.doc.gov)(PORT=1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENERTSE_ARCHIVE =
(SID_LIST=
(SID_DESC=
(SID_NAME=TSE_ARCHIVE)
(ORACLE_HOME=J:\app\product\11.1.0\db_2)
(PROGRAM=dg4odbc)
(SID_DESC=
(SID_NAME=tpisdb06)
(ORACLE_HOME=J:\app\product\11.1.0\db_2)
The SID_LIST_LISTENER needs to match the actual listener name and the program for 11g DG4ODBC is called dg4odbc and not hsodbc.
tnsnames.ora -
TSE_ARCHIVE =
(DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = TSE_ARCHIVE)(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = TSE_ARCHIVE)
(HS=OK)
The HOST name - TSE_ARCHIVE does not match the HOST in the listener, so it should be -
TSE_ARCHIVE =
(DESCRIPTION=
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = xxxxx.ita.doc.gov)(PORT=1521))
(CONNECT_DATA =
(SERVICE_NAME = TSE_ARCHIVE)
(HS=OK)
I've changed the actual name to xxxxx so replace that with the name in the original file.
Change the files, stop and start the listener then try again.
If you still have an ora-12154 error then send the output from the following SQL -
select db_link, host from user_db_links; <=== as the user getting the error
and
select db_link, host from dba_db_links; <===== as a DBA user
Regards,
Mike

ODI 10.1.3.4.0 - Topology Manager Connection Error using SQL 2005 SP3

Hello All,
I am using the ODI repository in SQL 2005 SP3. I could create my master repository using the following parameters:
driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL:jdbc:microsoft:sqlserver://server_name:1433;SelectMethod=direct;DataBaseName=ODI
I needed to copy to the drivers directory all files of SQL 2000 (msutil.jar, msbase.jar,mssqlserver.jar) and SQL 2005 (sqljdbc.jar). I am using the JRE 1.4.2 and JDBC 2005 1.2 (http://msdn.microsoft.com/en-us/library/ms378422(SQL.90).aspx)
But when I try to connect in Topology Manager to create the work repository appears the following error:
using this driver string: com.microsoft.jdbc.sqlserver.SQLServerDriver
java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC] Can't start a cloned connection while in manual transaction mode.
using this driver string: com.microsoft.sqlserver.jdbc.SQLServerDriver
java.sql.SQLException: No suitable driver
Does Somebody know what is happening?
Regards,
Wallace Galvao
Sao Paulo - Brazil

Hi,
If you plan on using the SQL Server 2005 drivers then you only need the 1.2 sqljdbc.jar file in the drivers directory.
The connection details for SQL Server 2005 should be like the following.
com.microsoft.sqlserver.jdbc.SQLServerDriver
jdbc:sqlserver://<sqls machine>:1433;databaseName=<db name>;integratedSecurity=false
I would try just with just the correct driver in place, remove the others, restart any ODI components and then make sure the connection information is correct like above.
Cheers
John
http://john-goodwin.blogspot.com/

SQL 2005 and Weblogic : JDBC configuration error

All.
What files do I need to modify with classpath, to use SQL 2005 drive. Is this the only I need to modify with classpath: startWebLogic.sh or do I need to modify other files?
Thanks for you help.
I am getting following error :
<Oct 29, 2008 10:34:37 AM EDT> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING>
<Oct 29, 2008 10:34:37 AM EDT> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode>
<Oct 29, 2008 10:45:02 AM EDT> <Error> <Console> <BEA-240003> <Console encountered the following error java.lang.ClassNotFoundException: Cannot load driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
at com.bea.console.utils.jdbc.JDBCUtils.testConnection(JDBCUtils.java:500)
at com.bea.console.actions.jdbc.datasources.createjdbcdatasource.CreateJDBCDataSource.testConnectionConfiguration(CreateJDBCDataSource.java:369)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.beehive.netui.pageflow.FlowController.invokeActionMethod(FlowController.java:870)
at org.apache.beehive.netui.pageflow.FlowController.getActionMethodForward(FlowController.java:809)
at org.apache.beehive.netui.pageflow.FlowController.internalExecute(FlowController.java:478)
at org.apache.beehive.netui.pageflow.PageFlowController.internalExecute(PageFlowController.java:306)
at org.apache.beehive.netui.pageflow.FlowController.execute(FlowController.java:336)
at org.apache.beehive.netui.pageflow.internal.FlowControllerAction.execute(FlowControllerAction.java:52)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors$WrapActionInterceptorChain.continueChain(ActionInterceptors.java
Thank you
Sayef

In old release, you should update CLASSPATH variable in setWLSEnv.sh or setWLSEnv.cmd.
In 9.x or 10.x, you should update setDomainEnv.sh or setDomainEnv.cmd.
Simon

SQL database login for 'SharePoint_Config_2010' on instance 'DB server' failed. Additional error information from SQL Server is included below.

we formatted Database server and restored all the databases from the backup. but the sharepoint site is giving below error when i access the home page.
we have 3 application servers in that two are working fine, but only one server getting the below error.
SQL database login for 'SharePoint_Config_2010' on instance 'db server' failed. Additional error information from SQL Server is included below.
Login failed for user 'domain\user'.
could you help what is the issue?

Hi,
According to your post, my understanding is that you failed to access sharepoint site with one application server.
It was due to the MOM/SCOM Agent that has a SharePoint management pack installed, the agents Windows Service runs as ‘Local System’ and thus causes this.
The workaround is to either kill the SCOM agent service, or set it to run as a dedicated service account.
In addtion, I recommend to add the logon account of the SharePoint Timer service as a user of the SharePoint_Config database. Give role membership to the account db_owner.
You also need to add the SharePoint accounts back into sql server.
There are some similar articles for you to take a look at:
http://blog.blksthl.com/2012/04/26/login-for-sharepoint_config-login-failed-for-user-domaincomputername-scom-agent/
http://msdn.microsoft.com/en-us/library/jj551781(v=nav.70).aspx
http://sharepoint.stackexchange.com/questions/51623/moved-sql-databases-for-sharepoint-2010-and-now-have-a-3351-error
Best Regards,
Linda Li
Linda Li
TechNet Community Support

Sql 2005 login error

Similar Messages

Maybe you are looking for