SQL 2008 R2 Express Install Failure
An attempt to install SQL 2008 R2 Express results in failure - Fusion Active Template (.ATL) file failure. Is there a way to correct this failure? Thank You
Did you checked below link
http://stackoverflow.com/questions/16417130/rule-fusionactive-template-library-atl-failed-during-sql-server-2008-r2-instal
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP
Similar Messages
-
Cannot see new SQL 2008 R2 Express instance on Small Business Server 2011!
Hi,
As it is stated on the subject line, I'm having a problem after I did a new install of SQL 2008 R2 Express and put a new instance on SBS 2011.
I'm developing a new program using SQL 2008 in C# and VB.Net. I have SQL 2008 R2 Express installed on my computer called "MSQL8R2EDATA" on my PC. Now I need to deploy it on SBS 2011 so I can do some testing on other workstations.
I'm currently running Windows 7, 64 bit, and it's named STEVE-PC. The SBS 2011 is named SERVER1, and it's 64 bit as well.
After installation on SERVER1 (SBS 2011), I then fired up SQL Server Configuration Manager and enabled Named Pipes, TCP/IP, and VIA.
After I've completed the SQL Configuration on SERVER1, I went back on my PC (STEVE-PC) and I tried to use Management Studio to connect to the new instance MSQL8R2EDATA on SBS 2011, only problem is, I only see the computer name, not the new instance
I've installed.
Back on SBS 2011 (SERVER1), I've verified that all the protocols are enabled, and the SQL Server Browser is automatically loaded and currently running, as well the MSQL8R2EDATA instance is automatically loaded and running, yet I still cannot see
it from my PC (STEVE-PC). I even switched from dynamic ports to a static port of 64719 (that was what the MSQL8R2EDATA was listening on that port when it was dynamic), and then added new rules to the Windows Firewall for program of the SQLSERVR.EXE, and
for UDP and TCP for port 64719 to "Allow All Connections" for Domain, Private, and Public; yet I still cannot connect SERVER1\MSQL8R2EDATA. I even disabled the firewall and then trying to connect once again to SBS 2001 and it still fails.
In case you're wondering, I left it on port 64719 since there are other active SQL Servers on SBS 2011 (SharePoint, SBSMonitoring, and ACT7).
Interestingly, when I run Management Studio on SBS 2011, I can see STEVE-PC\MSQL8R2EDATA and I'm able to log in and connect to it.
So what's going on here?!? Why am I able to connect to STEVE-PC which is Windows 7 64 from SBS 2011 (SERVER1), but I cannot connect from my computer to that instance on SBS 2011??
I really could use some big time help on this.
EDIT: Sorry for the confusion, but on the Windows Firewall (WF.msc), I did add new rules for incoming connections on:
Program incoming connections to SQLSERVR.EXE
TCP Port 64719
UDP Port 64719
EDIT: To further assist, I have Management Studio installed on the SBS 2011, and I can locally log in and connect to the MSQL8R2DATA on SERVER1 with success. I even tried tcp:SERVER1\MSQL8R2DATA and again it is successful log-in and connection.
Thanks in advance!
SteveHi,
Thanks for the response, but I have a question:
Installing SQL Express or SQL Server is not recommended on SBS
2011 because it is a DC, however technically it will work.
I'm a newbie when it comes to SBS 2011 and I'm taking a crash course on the subject. Can you explain to me what you mean by "DC"? Also, why
isn't recommended to install a new instance on SBS 2011?
As I also stated, I've added "New Rules" to the Windows Firewall to allow incoming connections on port 64719 for both TCP and UDP, and I also allowed incoming connections for SQLSERVR.EXE but no joy to connect to the SERVER1\MSQL8R2EDATA.
And yes, I can log-in and connect locally on SERVER1 using Management Studio with success. I even used tcp:SERVER1\MSQL8R2EDATA with the same success. It's my workstation STEVE-PC that fails. If that fails, then the rest of the workstations are going to fail.
Are you suggesting that I put the SQL Server 2008 Express on another workstation and just allow to to be
accessed that way? -
SQL 2008 R2 SP3 ugrade failure
SQL 2008 R2 SP3 upgrade failure Current Version: Microsoft SQL Server 2008 R2 (SP2) - 10.50.4305.0 (X64) Apr 3 2014 17:55:58 Copyright (c) Microsoft Corporation Enterprise Edition (64-bit) on Windows NT 6.1 <x64>(Build 7601: Service Pack 1) (Hypervisor)
Exit code : 325526488 Exit acility code: 871 Exit error code: 9176
Could not find any resources for the specified culture or the neutral culture. Make sure "Errors.resources" was correctly embedded or linked into assembly "Microsoft.SqlServer.Discovery" at compile time, or that all the satellite assemblies
required are loadable and fully signed.
</x64> Please advise.Hello,
SQL Server setup is trying to find the SQLSysClrTypes_Cpu64 MSI package on the C:\Windows\Installer\257f1f.msi path. I
found the following line on the file you submitted:
Package SQLSysClrTypes_Cpu64: - The path of cached MSI package is: C:\Windows\Installer\257f1f.msi
Try copying the MSI from a SQL Server 2008 R2 RTM media and name it 257f1f.msi or use the FindSQLInstalls.vbs script on the following article to copy the file for you. Put the SQL Server 2008 R2 RTM media on the same place where it was when you installed the
instance before running the script.
http://support.microsoft.com/kb/969052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server 2014 Express Installation Failure
Hi,
Now trying to install SQL Server 2014 Express on my work machine. Here is the error log. Any ideas? The error help link is useless.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-06-19 16:24:17
End time: 2014-06-19 16:38:03
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: PC12345
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Scott\Software\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: C:\SQL Server Data
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: INTERNAL\sbass
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140619_162416\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140619_162416\SystemConfigurationCheck_Report.htmThanks Shanky, that fixed my issue. I reinstalled, specifying NT AUTHORITY\LOCALSYSTEM for the SQL Server Database Engine account. After the successful installation, I used Sql Server Configuration Manager to change the account to LocalService
(NT AUTHORITY\LocalService). The Database Engine is restarting OK.
So, my accounts are:
SQL Server (MSSQLSERVER): NT AUTHORITY\LocalService
SQL Full-text Fiter Daemon Launcher (MSSQLSERVER): NT Service\MSSQLFDLauncher
SQL Server Reporting Services (MSSQLSERVER): NT Service\ReportServer
SQL Server Browser: NT AUTHORITY\LOCALSERVICE
SQL Server Agent (MSSQLSERVER): NT AUTHORITY\NETWORKSERVICE
I check out the link http://msdn.microsoft.com/en-us/library/ms143504.aspx#Serv_Perm. I'm a bit confused how the NT Service\* accounts are created, such as NT Service\MSSQLSERVER. However, I did see this http://msdn.microsoft.com/en-us/library/ms191153.aspx#manual;
perhaps I need to read it further.
Regardless, this is my desktop machine, the installation is for development only, it's inside our network, and no external users will be accessing this SQL Server instance. So, while I haven't fully read the details on running under LocalService, I
believe this will meet my needs.
Thanks again for your help. -
SQL Server 2012 Express Install on Windows 7 SP1 Embedded not using virtual account?
Hi there,
I did a default installation of SQL Server 2012 Express on Windows 7 embedded Standard SP1.
When I look at the SQLSERVER service credential it is configured to run under "NETWORK SERVICE" instead of the virtual account "NT SERVICE\MSSQL$SQLEXPRESS".
This is different from SQL 2012 Express installation on a non-embedded Windows 7.
Why is this difference?
Secondly, because of this, I am unable to take a backup of databases to any folder other than the default SQL folder.Hi Chandrasekaran,
As Local Service account, the Network Service account and high privileged Local System account could be used by many services.
It becomes harder to track which service is actually accessing resources and performing actions, because all the services are using the one Network Service account or other account.
In Windows7 and Windows Server 2008R2, it introduces a new type of account called a virtual account, which emulates creating many unique instances of the Network Service account, so each service runs with its own instance of the Network Service account.
For example, when you install SQL 2012 on Windows Server 2008 R2 or Windows 7 and later you’ll see the services run with virtual service accounts named like:
in the format NT SERVICE\<SERVICENAME>.
According to your description, when the SQLSERVER service was run under “NETWORK SERVICE”, you only back up database to the default SQL folder. It may be caused by the NETWORK SERVICE account has limited local privileges, just accesses network
resource with the computer credential. I recommend you change the account to Local System account, by default, which has full permissions on your computer.
For more information about SQL Server service account and virtual account, you can review the following articles.
http://www.travisgan.com/2013/06/sql-server-service-account-and-per.html
http://www.sqlservercentral.com/blogs/sqldbauk/2014/01/13/sql-server-2012-and-virtual-service-accounts/
http://msdn.microsoft.com/en-us/library/ms143504(v=sql.110).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
SharePoint 2010 + SQL 2008 + DPM 2012 Backup Failures
I have a single SharePoint 2010 WFE and a SQL 2008 server backend. Since configuring DPM to run the SharePoint backup through the WFE, I have had no success with backups.
DPM Reports:
The VSS application writer or the VSS provider is in a bad state. Either it was already in a bad state or it entered a bad state during the current operation. (ID 30111 Details: VssError: The writer experienced a non-transient error. If the backup process
is retried, the error is likely to reoccur. (0x800423F4))
Event Log on SQL Server Reports:
Log Name: Application
Source: SQLWRITER
Date: 4/24/2014 4:44:17 PM
Event ID: 24583
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: srv-sql-01
Description:
Sqllib error: OLEDB Error encountered calling ICommandText::Execute. hr = 0x80040e14. SQLSTATE: 42000, Native Error: 319
Error state: 1, Severity: 15
Source: Microsoft SQL Server Native Client 10.0
Error message: Incorrect syntax near the keyword 'with'. If this statement is a common table expression, an xmlnamespaces clause or a change tracking context clause, the previous statement must be terminated with a semicolon.
SQLSTATE: 42000, Native Error: 103
Error state: 3, Severity: 15
Source: Microsoft SQL Server Native Client 10.0
Error message: The file that starts with '\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy334\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\WSS_Content30_1.mdf
' is too long. Maximum length is 259.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="SQLWRITER" />
<EventID Qualifiers="0">24583</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-24T21:44:17.000000000Z" />
<EventRecordID>293470</EventRecordID>
<Channel>Application</Channel>
<Computer>srv-sql-01</Computer>
<Security />
</System>
<EventData>
<Data>ICommandText::Execute</Data>
<Data>0x80040e14</Data>
<Data>SQLSTATE: 42000, Native Error: 319
Error state: 1, Severity: 15
Source: Microsoft SQL Server Native Client 10.0
Error message: Incorrect syntax near the keyword 'with'. If this statement is a common table expression, an xmlnamespaces clause or a change tracking context clause, the previous statement must be terminated with a semicolon.
SQLSTATE: 42000, Native Error: 103
Error state: 3, Severity: 15
Source: Microsoft SQL Server Native Client 10.0
Error message: The file that starts with '\\?\GLOBALROOT\Device\HarddiskVolumeShadowCopy334\Program Files\Microsoft SQL Server\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\WSS_Content30_1.mdf
' is too long. Maximum length is 259.
</Data>
<Binary>53514C434F4E4E43313236330000000053514C434F4E4E433132323800000000</Binary>
</EventData>
</Event>
Followed by:
Log Name: Application
Source: VSS
Date: 4/24/2014 4:44:17 PM
Event ID: 8229
Task Category: None
Level: Warning
Keywords: Classic
User: N/A
Computer: srv-sql-01
Description:
A VSS writer has rejected an event with error 0x800423f4, The writer experienced a non-transient error. If the backup process is retried,
the error is likely to reoccur.
. Changes that the writer made to the writer components while handling the event will not be available to the requester. Check the event log for related events from the application hosting the VSS writer.
Operation:
PostSnapshot Event
Context:
Execution Context: Writer
Writer Class Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Name: SqlServerWriter
Writer Instance Name: SQL Server 2008 R2:SQLWriter
Writer Instance ID: {18aa641d-ffcd-44be-84eb-77867e909c51}
Command Line: "C:\Program Files\Microsoft SQL Server\90\Shared\sqlwriter.exe"
Process ID: 6036
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="VSS" />
<EventID Qualifiers="0">8229</EventID>
<Level>3</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-24T21:44:17.000000000Z" />
<EventRecordID>293471</EventRecordID>
<Channel>Application</Channel>
<Computer>srv-sql-01</Computer>
<Security />
</System>
<EventData>
<Data>0x800423f4, The writer experienced a non-transient error. If the backup process is retried,
the error is likely to reoccur.
</Data>
<Data>
Operation:
PostSnapshot Event
Context:
Execution Context: Writer
Writer Class Id: {a65faa63-5ea8-4ebc-9dbd-a0c4db26912a}
Writer Name: SqlServerWriter
Writer Instance Name: SQL Server 2008 R2:SQLWriter
Writer Instance ID: {18aa641d-ffcd-44be-84eb-77867e909c51}
Command Line: "C:\Program Files\Microsoft SQL Server\90\Shared\sqlwriter.exe"
Process ID: 6036</Data>
<Binary>2D20436F64653A20575254575254494330303030353239392D2043616C6C3A20575254575254494330303030333336352D205049443A202030303030363033362D205449443A202030303030323630342D20434D443A202022433A5C50726F6772616D2046696C65735C4D6963726F736F66742053514C205365727665725C39305C5368617265645C73716C7772697465722E65786522202D20557365723A204E616D653A204E5420415554484F524954595C53595354454D2C205349443A532D312D352D313820</Binary>
</EventData>
</Event>
When I run vssadmin list writers after the error, the "SqlServerWriter" show a State of [11]. I can restart the service and the error clears up showing stable, but the next time I run the backup it fails again.
From the error, it almost sounds like the path is too long. This doesn't totally make sense to me considering the database was successfully backed up before I tried to back it up as a SharePoint database.
Any suggestions would be appreciated.Got the issue solved.
DPM has issues with DNS Aliases for SQL.
To get this issue sorted out i used the old HOSTS file to point the right name to the right SQL server. -
SQL 2008 R2 cluster installation failure - Failed to find shared disks
Hi,
The validation tests in the SQL 2008R2 cluster installation (running Windows 2008 R2) fails with the following error. The cluster has one root mount point with multiple mount points :
"The cluster on this computer does not have a shared disk available. To continue, at least one shared disk must be available'.
The "Detail.txt" log has alot of "access is denied" errors and here is just a sample. Any ideas what might be causing this issue?
2010-09-29 12:54:08 Slp: Initializing rule : Cluster shared disk available check
2010-09-29 12:54:08 Slp: Rule applied features : ALL
2010-09-29 12:54:08 Slp: Rule is will be executed : True
2010-09-29 12:54:08 Slp: Init rule target object: Microsoft.SqlServer.Configuration.Cluster.Rules.ClusterSharedDiskFacet
2010-09-29 12:54:09 Slp: The disk resource 'QUORUM' cannot be used as a shared disk because it's a cluster quorum drive.
2010-09-29 12:54:09 Slp: Mount point status for disk 'QUORUM' could not be determined. Reason: 'The disk resource 'QUORUM' cannot be used because it is a cluster quorum drive.'
2010-09-29 12:54:09 Slp: System Error: 5 trying to find mount points at path
\\?\Volume{e1f5ca48-c798-11df-9401-0026b975df1a}\
2010-09-29 12:54:09 Slp: Access is denied.
2010-09-29 12:54:09 Slp: Mount point status for disk 'SQL01_BAK01' could not be determined. Reason: 'The search for mount points failed. Error: Access is denied.'
2010-09-29 12:54:10 Slp: System Error: 5 trying to find mount points at path
\\?\Volume{e1f5ca4f-c798-11df-9401-0026b975df1a}\
2010-09-29 12:54:10 Slp: Access is denied.
2010-09-29 12:54:10 Slp: Mount point status for disk 'SQL01_DAT01' could not be determined. Reason: 'The search for mount points failed. Error: Access is denied.'
2010-09-29 12:54:10 Slp: System Error: 5 trying to find mount points at path
\\?\Volume{e1f5ca56-c798-11df-9401-0026b975df1a}\
2010-09-29 12:54:10 Slp: Access is denied.
Thanks,
PKHi,
We were asked by the PSS engineer to give the following privileges the account used to install SQL Server - i am referring to the user domain account as apposed to the SQL service account. These privileges were already applied to the
SQL service account prior to the SQL installation. Assigning these privileges to the user account resolved the issue.
Act as Part of the Operating Sywstem = SeTcbPrivileg
Bypass Traverse Checking = SeChangeNotify
Lock Pages In Memory = SeLockMemory
Log on as a Batch Job = SeBatchLogonRight
Log on as a Service = SeServiceLogonRight
Replace a Process Level Token = SeAssignPrimaryTokenPrivilege
Thanks for everyones assistance.
Cheers,
PK -
HI
I want to upgrade a SQL 2008 R2 Express install to 2008 R2 Web Edition.
when I click view detailed report I get the below.
How do I fix this?Hello,
As per below link upgrade of SQL Server 2008 express to SQL server 2008 r2 web is not supported.So i guess this message.I have never tried upgrading unsupported edition so not too much sure about error message.But i am sure not meets requirement is because
of unsupported upgrade you are doing
http://technet.microsoft.com/en-us/library/ms143393(v=sql.105).aspx
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Installing SSMS 2012 after SQL Server 2008 R2 Express was installed (without tools)
Hi everybody,
This is a question in another forum I am frequent. Someone installed SQL Server Express 2008 R2 and he used the wrong exe, so he installed it without tools. Now he wants to install SSMS.
It looks like SSMS 2012 wants to have SQL Server 2012 Express installed first.
Can someone please confirm if it's possible to install just SSMS 2012 after SQL Server 2008 R2 Express was already installed and if possible, guide through the installation steps?
Thanks a lot in advance.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articlesHi Naomi,
Agree with Shanky.
I have tested the scenario you described. Everything works well, I successfully install SQL Server Management studio 2012 after SQL Server 2008 R2 Express (without tools) was already installed.
Please note that we don’t need to install SQL Server 2012 Express first when installing SSMS 2012. For detailed installation steps of SQL Server 2008 R2 Express and SSMS 2012, you can review below blogs.
How to Install SQL Server 2008 R2 (Express Edition)
SQL Server Management Studio – A step-by-step installation guide
In addition, we can use SSMS 2012 to manage SQL Server Express 2005 /2008 /2008 R2, the tool is backward compatible.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
Error received when installing SQL Server 2008 R2 Express
I receive the following error when I try to install SQL Server 2008 R2 Express-
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.Configuration.ConfigurationErrorsException: An error occurred creating the configuration section handler for userSettings/Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings: Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral,
PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified. (C:\Users\rhaas\AppData\Local\Microsoft_Corporation\LandingPage.exe_StrongName_ryspccglaxmt4nhllj5z3thycltsvyyx\10.0.0.0\user.config line 5) ---> System.IO.FileNotFoundException:
Could not load file or assembly 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' or one of its dependencies. The system cannot find the file specified.
File name: 'System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089'
at System.Configuration.TypeUtil.GetTypeWithReflectionPermission(IInternalConfigHost host, String typeString, Boolean throwOnError)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.Init(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory.InitWithRestrictedPermissions(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.RuntimeConfigurationFactory..ctor(RuntimeConfigurationRecord configRecord, FactoryRecord factoryRecord)
at System.Configuration.RuntimeConfigurationRecord.CreateSectionFactory(FactoryRecord factoryRecord)
at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
--- End of inner exception stack trace ---
at System.Configuration.BaseConfigurationRecord.FindAndEnsureFactoryRecord(String configKey, Boolean& isRootDeclaredHere)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey, Boolean getLkg, Boolean checkPermission)
at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
at System.Configuration.ClientConfigurationSystem.System.Configuration.Internal.IInternalConfigSystem.GetSection(String sectionName)
at System.Configuration.ConfigurationManager.GetSection(String sectionName)
at System.Configuration.ClientSettingsStore.ReadSettings(String sectionName, Boolean isUserScoped)
at System.Configuration.LocalFileSettingsProvider.GetPropertyValues(SettingsContext context, SettingsPropertyCollection properties)
at System.Configuration.SettingsBase.GetPropertiesFromProvider(SettingsProvider provider)
at System.Configuration.SettingsBase.GetPropertyValueByName(String propertyName)
at System.Configuration.SettingsBase.get_Item(String propertyName)
at System.Configuration.ApplicationSettingsBase.GetPropertyValue(String propertyName)
at System.Configuration.ApplicationSettingsBase.get_Item(String propertyName)
at Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings.get_WindowPlacement()
at Microsoft.SqlServer.Configuration.LandingPage.LandingPageForm.OnLoad(EventArgs e)
at System.Windows.Forms.Form.OnCreateControl()
at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
at System.Windows.Forms.Control.CreateControl()
at System.Windows.Forms.Control.WmShowWindow(Message& m)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
at System.Windows.Forms.ContainerControl.WndProc(Message& m)
at System.Windows.Forms.Form.WmShowWindow(Message& m)
at System.Windows.Forms.Form.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
LandingPage
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/LandingPage.exe
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
Microsoft.SqlServer.Configuration.Sco
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Configuration.Sco.DLL
Microsoft.SqlServer.Chainer.Infrastructure
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Chainer.Infrastructure.DLL
System.Xml
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
Accessibility
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.4927 (NetFXspW7.050727-4900)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/Accessibility/2.0.0.0__b03f5f7f11d50a3a/Accessibility.dll
Microsoft.SqlServer.Management.Controls
Assembly Version: 10.0.0.0
Win32 Version: 10.50.1600.1 ((KJ_RTM).100402-1540 )
CodeBase:
file:///c:/976a3a4150b5ddedc8968e5dee63fa41/x86/Microsoft.SqlServer.Management.Controls.DLL
System.Configuration
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase:
file:///C:/windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Does anyone have any ideas on how to proceed? Installing will not complete.Hi Balmukund!
Thanks for your help. I did rename both folders to a generic name (rename_folder_1 & rename_folder_2) and the install failed again. Did I rename the folders in a correct manner? Below is a copy of the user.config file referenced in
your post above. Any additional direction would be very helpful.
Thanks!
<?xml version="1.0" encoding="utf-8"?>
<configuration>
<configSections>
<sectionGroup name="userSettings" type="System.Configuration.UserSettingsGroup, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089" >
<section name="Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings" type="System.Configuration.ClientSettingsSection, System, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089"
allowExeDefinition="MachineToLocalUser" requirePermission="false" />
</sectionGroup>
</configSections>
<userSettings>
<Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings>
<setting name="WindowPlacement" serializeAs="Xml">
<value>
<WINDOWPLACEMENT xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<showCmd>3</showCmd>
<ptMinPosition>
<x>-1</x>
<y>-1</y>
</ptMinPosition>
<ptMaxPosition>
<x>-1</x>
<y>-1</y>
</ptMaxPosition>
<rcNormalPosition>
<left>0</left>
<top>0</top>
<right>800</right>
<bottom>600</bottom>
</rcNormalPosition>
</WINDOWPLACEMENT>
</value>
</setting>
</Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings>
</userSettings>
</configuration> -
Hi,
I try to install, the SQL Express 2008 R2 with Advanced
The installation has only one error (Error 1316. The Specific account already exists.) and the Management Tools Basic setup is failed.
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Exit code (Decimal): -2068052700
Exit facility code: 1212
Exit error code: 1316
Exit message: SQL Server installation failed. To continue, investigate the
reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server
Setup.
Start time: 2015-01-02 16:17:17
End time: 2015-01-02 16:24:01
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SSCRuntime_Cpu32_1.log
Exception help link: http://go.microsoft.com/fwlink?
LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.4000.0
Machine Properties:
Machine name: KHPNHSI_BNANG
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: g:\41bee43707e62fab54ec\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 2
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,SSMS,SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLExpress
INSTANCENAME: SQLEXPRESS
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: g:\41bee43707e62fab54ec\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: FilesOnlyMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: PSI\ssamnang
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap
\Log\20150102_161500\SystemConfigurationCheck_Report.htm
Please help!
Samnang.Hi SSamnang,
According to your description, you come across the error that the specific account already exists. Please help to share the complete error log in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150102_161500\SSCRuntime_Cpu32_1.log. You could
use google drive to upload the error log following the steps in the article:
https://support.google.com/drive/answer/2424368?hl=en
From the exception help link, we notice that, the issue could be due to that an attempt fails to install SQL Server Native Client on a computer where SQL Server Native Client is already installed.
I recommend you to check if there is already an existing SQL Server Native Client on your computer. If there is an existing one, you could uninstall it and install SQL Server again.
In addition, there is a similar thread for reference:
https://social.technet.microsoft.com/Forums/en-US/dc31bffd-c9e2-4630-b5d7-9252b03c24fe/sql-2008-r2-management-tools-install-fails-the-specified-account-already-exists?forum=sqltools.
Regards,
Michelle Li -
Sql Server Express 2012 install failure
I have attempted to install sql server 2012 express and keep getting the same error "Attempted to perform an unauthorised operation" It appears to happen while installing "SqlBrowserConfigAction_repair_ConfigNonRC_Cpu32".
The Log has the following:
Detailed results:
Feature: Management Tools - Basic
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Browser
Component error code: 0x84BB0001
Error description: Attempted to perform an unauthorized operation.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xE32A4906%400x92D13C14&EvtType=0xE32A4906%400x92D13C14
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Browser
Component error code: 0x84BB0001
Error description: Attempted to perform an unauthorized operation.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xE32A4906%400x92D13C14&EvtType=0xE32A4906%400x92D13C14
Feature: SQL Browser
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Browser
Component error code: 0x84BB0001
Error description: Attempted to perform an unauthorized operation.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xE32A4906%400x92D13C14&EvtType=0xE32A4906%400x92D13C14
Can anyone see what I am doing wrong?
Thanks in advance
Brad
BHendHello,
Try to download the SQL Server media again. Uninstall any component installed and reinstall SQL Server again.
Please make sure you are running SQL Server setup with Run as Administrator option.
Download Process Monitor and run it to make sure there are no access denied errors accessing the Registry.
https://technet.microsoft.com/en-us/library/bb896645.aspx?f=255&MSPPError=-2147217396
Another possible causes are explained on the following support article.
https://support.microsoft.com/en-us/kb/2799534?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
My English - bad =)
Download SQL Server 2008 R2 Express ADV SP1 from
http://www.microsoft.com/en-us/download/details.aspx?id=26729
this
SQLEXPRADV_x64_ENU.exe
Installed, opened Management Studio,
made the request
print @@version
result:
Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86)
Feb 9 2007 22:47:07
Copyright (c) 1988-2005 Microsoft Corporation
Express Edition on Windows NT 6.1 (Build 7600: )
How to install the 2008 R2 Express ADV?? =)
I can't open the database version 661, because SQL Server 2005 - 612Hi,
You just installed SQl server management studio I guess and when you connected the system already had SQL Server 2005 and it connected to it.
If you are sure you installed express with advanced services (2008 r2) you need to go to Start..all program..can you see SQL server 2008 r2 listed ?
Now open SSMS for 2008 r2 and instead of connecting with default instance look for other instances in drop down in server name you would fine that for SQL Server 2008 r2 connect to that
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Errro while installing sql server 2012 express edition on Windows 8 -64 version
Hi,
Im trying to install sql server 2012 express edition on windows 8 machine(64 bit),however im getting same error every time.
The following error has occurred:
The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337
i've googled and checked all prerequisite which is already installed.so not finding the reason behind this error.
it would be great if any one can help on resolving this error.
Thanks in advance
Regards
RiteshHi ,
Thanks for help. here is the log summary text
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2068051679
Start time: 2014-02-05 12:30:44
End time: 2014-02-05 12:36:21
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, and then try the setup process again.
Next step for Replication: Use the following information to resolve the error, and then try the setup process again.
Machine Properties:
Machine name: IDEA-PC
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Database Engine Services
1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER SQL Server Replication
1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2 MSSQLSERVER MSSQL10_50.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Management Tools - Basic 1033 Developer Edition
10.50.1600.1 No
SQL Server 2008 R2
Management Tools - Complete 1033 Developer Edition 10.50.1600.1
No
SQL Server 2008 R2
Client Tools Connectivity 1033 Developer Edition 10.50.1600.1
No
SQL Server 2008 R2
Client Tools Backwards Compatibility 1033 Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Client Tools SDK 1033
Developer Edition 10.50.1600.1 No
SQL Server 2008 R2
Integration Services 1033 Developer Edition
10.50.1600.1 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: c:\b33170cf028067db5b8335d2\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, SNAC_SDK
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SQLFASHION
INSTANCENAME: SQLFASHION
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AI
SQLSVCACCOUNT: NT Service\MSSQL$SQLFASHION
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: idea-pc\lenovo
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Common Files
Component error code: 2337
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Common Files
Component error code: 2337
Component log file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\sql_common_core_Cpu64_1.log
Error description: The installer has encountered an unexpected error installing this package. This may indicate a problem with this package. The error code is 2337.
Error help link:
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140205_122837\SystemConfigurationCheck_Report.htm -
Overlapped I/O error 997 installing SQL Server 2014 Express on Windows Server 2012 R2
I'm attempting to install SQL Server 2014 Express on a Windows Server 2012 R2 system. When I do the install, it fails (several times) with an "Error: 997. Overlapped I/O operation is in progress.". From searching the web, I can see many people
have had this problem with this installer and other non-SQL server installers.
I've tried every solution I can find discussed, but none help with my problems The system is fully updated, with the exception of the KB2538243 (VC 2008 SP1 redist), which is probably failing for the same reason.
I've tried removing several updates mentioned in other articles (KB2918614). I've confirmed that I'm not using a temporary profile.
Does anyone have an idea of how I can solve this issue?
Thanks,
Zack
Partial detail from install log file:
Detailed results:
Feature: Management Tools - Complete
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150205_151618\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Feature: Client Tools Connectivity
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: Microsoft Visual Studio 2010 Redistributables
Component error code: 997
Component log file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150205_151618\VC10Redist_Cpu64_1.log
Error description: Error 997.Overlapped I/O operation is in progress.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=vc_red.msi%40ProcessComponents%40997
Partial detail from component log file:
MSI (s) (D8:3C) [15:18:29:173]: Resolving source.
MSI (s) (D8:3C) [15:18:29:173]: Resolving source to launched-from source.
MSI (s) (D8:3C) [15:18:29:173]: Setting launched-from source as last-used.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SourceDir property. Its value is 'C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\'.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SOURCEDIR property. Its value is 'C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\'.
MSI (s) (D8:3C) [15:18:29:188]: PROPERTY CHANGE: Adding SourcedirProduct property. Its value is '{1D8E6291-B0D5-35EC-8441-6616F567A0F7}'.
MSI (s) (D8:3C) [15:18:29:188]: SOURCEDIR ==> C:\Users\zerhart\Downloads\SQLEXPRWT_x64_ENU\redist\VisualStudioShell\VC10SP1\x64\
MSI (s) (D8:3C) [15:18:29:188]: SOURCEDIR product ==> {1D8E6291-B0D5-35EC-8441-6616F567A0F7}
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: A general error running CryptAcquireContext
MSI (s) (D8:3C) [15:18:29:188]: Determining source type
MSI (s) (D8:3C) [15:18:29:188]: Source type from package 'VC_RED.MSI': 2
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: Hash Database: C:\Windows\Installer\SourceHash{1D8E6291-B0D5-35EC-8441-6616F567A0F7}
MSI (s) (D8:3C) [15:18:29:188]: SECREPAIR: SourceHash database file already exists. Deleting it.
MSI (s) (D8:3C) [15:18:29:204]: Note: 1: 2262 2: SourceHash 3: -2147287038
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: New Hash Database creation complete.
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:0
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Crypt Provider not initialized. Error:997
MSI (s) (D8:3C) [15:18:29:235]: SECUREREPAIR: Failed to CreateContentHash of the file: install.res.1040.dll: for computing its hash. Error: 997
MSI (s) (D8:3C) [15:18:29:235]: SECREPAIR: Failed to create hash for the install source files
MSI (s) (D8:3C) [15:18:29:235]: SECUREREPAIR: SecureRepair Failed. Error code: 3e561F257D8
Action start 15:18:29: ProcessComponents.
MSI (s) (D8:3C) [15:19:28:843]:
Error 997.Overlapped I/O operation is in progress.Alberto,
Thanks for your help. Unfortunately, I've already tried that. I did try it again and I get an "This update is not applicable to your computer."
I tried to post the Windows Update log, but it was too large. I've posted some of it below.
Here is the WU log:
2015-02-06 11:24:25:793
5048 50
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: -0500) ===========
2015-02-06 11:24:25:793
5048 50
Misc = Process: C:\Windows\system32\wusa.exe
2015-02-06 11:24:25:793
5048 50
Misc = Module: C:\Windows\System32\wuapi.dll
2015-02-06 11:24:25:793
5048 50
COMAPI ----------- COMAPI: IUpdateServiceManager::AddScanPackageService -----------
2015-02-06 11:24:25:793
5048 50
COMAPI - ServiceName = Windows Update Standalone Installer
2015-02-06 11:24:25:793
5048 50
COMAPI - ScanFileLocation = C:\c5f288db3c43a7e4613232ca1a3c\wsusscan.cab
2015-02-06 11:24:25:808
920 111c
Misc =========== Logging initialized (build: 7.9.9600.17489, tz: -0500) ===========
2015-02-06 11:24:25:808
920 111c
Misc = Process: C:\Windows\system32\svchost.exe
2015-02-06 11:24:25:808
920 111c
Misc = Module: c:\windows\system32\wuaueng.dll
2015-02-06 11:24:25:808
920 111c
Service *************
2015-02-06 11:24:25:808
920 111c
Service ** START ** Service: Service startup
2015-02-06 11:24:25:808
920 111c
Service *********
2015-02-06 11:24:25:824
920 111c
IdleTmr Non-AoAc machine. Aoac operations will be ignored.
2015-02-06 11:24:25:824
920 111c
Agent * WU client version 7.9.9600.17489
2015-02-06 11:24:25:824
920 111c
Agent WARNING: SleepStudyTracker: Machine is non-AOAC. Sleep study tracker disabled.
2015-02-06 11:24:25:824
920 111c
Agent * Base directory: C:\Windows\SoftwareDistribution
2015-02-06 11:24:25:824
920 111c
Agent * Access type: No proxy
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 12.
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 4.
2015-02-06 11:24:25:824
920 111c
Agent * Network state: Connected
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv6, cNetworkInterfaces = 12.
2015-02-06 11:24:25:824
920 111c
Service UpdateNetworkState Ipv4, cNetworkInterfaces = 4.
2015-02-06 11:24:25:855
920 b64
Misc WARNING: Network Cost is assumed to be not supported as something failed with trying to get handles to wcmapi.dll
2015-02-06 11:24:25:855
920 111c
Agent *********** Agent: Initializing global settings cache ***********
2015-02-06 11:24:25:887
920 111c
Agent * Endpoint Provider: 00000000-0000-0000-0000-000000000000
2015-02-06 11:24:25:887
920 111c
Agent * WSUS server: <NULL>
2015-02-06 11:24:25:887
920 111c
Agent * WSUS status server: <NULL>
2015-02-06 11:24:25:887
920 111c
Agent * Target group: (Unassigned Computers)
2015-02-06 11:24:25:887
920 111c
Agent * Windows Update access disabled: No
2015-02-06 11:24:25:902
920 b64
WuTask WuTaskManager delay initialize completed successfully..
2015-02-06 11:24:25:902
920 b64
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-07 08:14:01, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
AU Timer: CF1ABEC6-7887-4964-BB93-B2E21B31CEC1, Expires 2015-02-06 19:30:54, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
AU Timer: 29A863E7-8609-4D1E-B7CD-5668F857F1DB, Expires 2015-02-06 19:30:54, not idle-only, not network-only
2015-02-06 11:24:25:902
920 b64
Report WARNING: CSerializationHelper:: InitSerialize failed : 0x80070002
2015-02-06 11:24:25:902
920 b64
Report CWERReporter::Init succeeded
2015-02-06 11:24:25:902
920 b64
Agent *********** Agent: Initializing Windows Update Agent ***********
2015-02-06 11:24:25:902
920 b64
DnldMgr Download manager restoring 0 downloads
2015-02-06 11:24:25:902
920 111c
AU ########### AU: Initializing Automatic Updates ###########
2015-02-06 11:24:25:902
920 111c
AU AIR Mode is disabled
2015-02-06 11:24:25:902
920 111c
AU # Approval type: Scheduled (User preference)
2015-02-06 11:24:25:902
920 111c
AU # Auto-install minor updates: Yes (User preference)
2015-02-06 11:24:25:902
920 111c
AU # Will interact with non-admins (Non-admins are elevated (User preference))
2015-02-06 11:24:25:902
920 111c
Misc WARNING: IsSessionRemote: WinStationQueryInformationW(WTSIsRemoteSession) failed for session 2, GetLastError=2250
2015-02-06 11:24:25:918
920 111c
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2015-02-06 11:24:25:918
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:918
920 111c
AU AU finished delayed initialization
2015-02-06 11:24:25:933
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:933
920 111c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2015-02-06 11:24:25:933
920 b64
Misc Validating signature for C:\Windows\SoftwareDistribution\ScanFile\a487aa0f-3e53-4fee-a784-6171b00254e4\Source.cab with dwProvFlags 0x00000080:
2015-02-06 11:24:25:933
920 111c
AU Adding timer:
2015-02-06 11:24:25:933
920 111c
AU Timer: 31DA7559-FE27-4810-8FF6-987195B1FD98, Expires 2015-02-07 08:14:01, not idle-only, not network-only
2015-02-06 11:24:25:949
920 af0
DnldMgr Asking handlers to reconcile their sandboxes
2015-02-06 11:24:25:949
920 b64
Misc Microsoft signed: Yes
2015-02-06 11:24:26:154
920 b64
DtaStor Default service for AU is {7971F918-A847-4430-9279-4A52D1EFE18D}
2015-02-06 11:24:26:154
920 b64
IdleTmr Incremented idle timer priority operation counter to 1
2015-02-06 11:24:26:154
5048 50
COMAPI - Added scan package service, ServiceID = {A487AA0F-3E53-4FEE-A784-6171B00254E4} Third party service
2015-02-06 11:24:26:154
5048 50
COMAPI -------------
2015-02-06 11:24:26:154
5048 50
COMAPI -- START -- COMAPI: Init Search [ClientId = wusa]
2015-02-06 11:24:26:154
5048 50
COMAPI ---------
2015-02-06 11:24:26:154
5048 50
COMAPI -------------
2015-02-06 11:24:26:154
5048 50
COMAPI -- START -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:26:154
5048 50
COMAPI ---------
2015-02-06 11:24:26:169
920 b64
IdleTmr WU operation (CSearchCall::Init ID 1) started; operation # 17; does use network; is not at background priority
2015-02-06 11:24:26:169
920 b64
IdleTmr Incremented idle timer priority operation counter to 2
2015-02-06 11:24:26:341
920 b64
Report *********** Report: Initializing static reporting data ***********
2015-02-06 11:24:26:341
920 b64
Report * OS Version = 6.3.9600.0.0.131344
2015-02-06 11:24:26:341
920 b64
Report * OS Product Type = 0x00000021
2015-02-06 11:24:26:357
920 b64
Report * Computer Brand = PowerSpec
2015-02-06 11:24:26:357
920 b64
Report * Computer Model = S Series
2015-02-06 11:24:26:357
920 b64
Report * Platform Role = 1
2015-02-06 11:24:26:357
920 b64
Report * AlwaysOn/AlwaysConnected (AOAC) = 0
2015-02-06 11:24:26:357
920 b64
Report * Bios Revision = 1.1a
2015-02-06 11:24:26:357
920 b64
Report * Bios Name = 1.1a
2015-02-06 11:24:26:357
920 b64
Report * Bios Release Date = 2013-08-20T00:00:00
2015-02-06 11:24:26:357
920 b64
Report * Bios Sku Number = S Series
2015-02-06 11:24:26:357
920 b64
Report * Bios Vendor = American Megatrends Inc.
2015-02-06 11:24:26:357
920 b64
Report * Bios Family = Server
2015-02-06 11:24:26:357
920 b64
Report * Bios Major Release = 4
2015-02-06 11:24:26:357
920 b64
Report * Bios Minor Release = 6
2015-02-06 11:24:26:357
920 b64
Report * Locale ID = 1033
2015-02-06 11:24:26:357
920 b64
Handler Calculating current update level for this session
[ Omitted data ]
http://support.microsoft.com/?kbid=3000850, timestamp 01d039c57a22c0be
2015-02-06 11:24:28:388
920 b64
Handler Done calculating current update level for this session
2015-02-06 11:24:28:982
920 b64
Agent *** START *** Queueing Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
5048 50
COMAPI <<-- SUBMITTED -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:28:982
920 11f4
Agent *** END *** Queueing Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
920 11f4
Agent *************
2015-02-06 11:24:28:982
920 11f4
Agent ** START ** Agent: Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:28:982
920 11f4
Agent *********
2015-02-06 11:24:28:982
920 11f4
Agent * Online = Yes; Ignore download priority = No
2015-02-06 11:24:28:982
920 11f4
Agent * Criteria = "DeploymentAction='Installation'"
2015-02-06 11:24:28:982
920 11f4
Agent * ServiceID = {A487AA0F-3E53-4FEE-A784-6171B00254E4} Third party service
2015-02-06 11:24:28:982
920 11f4
Agent * Search Scope = {Machine}
2015-02-06 11:24:28:982
920 11f4
Agent * Caller SID for Applicability: S-1-5-21-3157695610-3447843402-2534478823-500
2015-02-06 11:24:28:982
920 11f4
Agent * RegisterService is set
2015-02-06 11:24:29:185
920 11f4
PT +++++++++++ PT: Synchronizing server updates +++++++++++
2015-02-06 11:24:29:185
920 11f4
PT + Offline serviceId = {A487AA0F-3E53-4FEE-A784-6171B00254E4}
2015-02-06 11:24:29:185
920 11f4
PT WARNING: Cached cookie has expired or new PID is available
2015-02-06 11:24:29:185
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:185
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:185
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:294
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:294
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:294
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:357
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:357
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:357
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:29:638
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:29:638
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:29:638
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:013
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:30:013
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:30:013
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:044
920 11f4
Agent Reading cached app categories using lifetime 604800 seconds
2015-02-06 11:24:30:044
920 11f4
Agent Read 0 cached app categories
2015-02-06 11:24:30:044
920 11f4
Agent SyncUpdates adding 0 visited app categories
2015-02-06 11:24:30:044
920 11f4
PT + SyncUpdates round trips: 5
2015-02-06 11:24:30:076
920 11f4
PT +++++++++++ PT: Synchronizing extended update info +++++++++++
2015-02-06 11:24:30:076
920 11f4
PT + Offline serviceId = {A487AA0F-3E53-4FEE-A784-6171B00254E4}
2015-02-06 11:24:30:138
920 11f4
Agent * Found 0 updates and 54 categories in search; evaluated appl. rules of 126 out of 284 deployed entities
2015-02-06 11:24:30:138
920 11f4
Agent *********
2015-02-06 11:24:30:138
920 11f4
Agent ** END ** Agent: Finding updates [CallerId = wusa Id = 1]
2015-02-06 11:24:30:138
920 11f4
Agent *************
2015-02-06 11:24:30:138
920 11f4
IdleTmr WU operation (CSearchCall::Init ID 1, operation # 17) stopped; does use network; is not at background priority
2015-02-06 11:24:30:138
920 11f4
IdleTmr Decremented idle timer priority operation counter to 1
2015-02-06 11:24:30:154
5048 1428
COMAPI >>-- RESUMED -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:30:154
5048 1428
COMAPI - Updates found = 0
2015-02-06 11:24:30:154
5048 1428
COMAPI ---------
2015-02-06 11:24:30:154
5048 1428
COMAPI -- END -- COMAPI: Search [ClientId = wusa]
2015-02-06 11:24:30:154
5048 1428
COMAPI -------------
Maybe you are looking for
-
Variable Size Item, Material Setting
Dear All, I have a requirement, from users, They want to use Formula as ROMS1 * ROMS2 * ROMS3 * 1160 where 1160 is Density, and out put is Mass. Material Should be issued in Nos/Pc in Shop and not in KG, I want to know how this material to be used
-
Can we call a procedure within function?
Can we call a procedure in function? If yes, then please explain with example. Thanks Aman
-
Why my Lumia 920 takes shots in res. 720x1278 in...
why my Lumia 920 takes shots in resolution 720x1278 instead of 3553 x 2448 and I cannot find the way to change in the settings. Is it a bug?
-
Application launching problem in Google Chrome
Hi All, I am trying to launch a desktop application from browser(Google Chrome Version 21.0.1180.60 m). When i try to launch the application it is asking for AIR install even though i have already installed adobe air. When we try to install adobe
-
[SOLVED]NetworkManager won't work since updating to KDE 4.3.4
Hello there, I'm running Arch64 on Qosmio X300 notebook. I have just updated to KDE 4.3.4 and since the update the NetworkManager won't connect to my wifi (I haven't tried wired yet). I use following packages for NetworkManager and KNetworkManager ap