Sql developer 3.0: could be possible to avoid creating connections
Hi, when connecting from oracle forms, you don't have to create a connection, in the same way I don't know if could be possible to avoid creating connections when you are using a tnsnames.ora archive.
simple to choose the connection as in oracle forms, and the posibility to save the password.
thank you
As stated in the forum announcement, you can request this at the SQL Developer Exchange, so other users can vote and add weight for possible future implementation.
Regards,
K.
Similar Messages
-
SQL Developer: "network adapter could not establish the connection"
Can some one help. I dont seem to know wat the problem is.
PL/SQL connection is ok.
I use userneme; scott
password: tiger
but my SQL Developer will not coonect
showing above messageHi;
For your issue i suggest close your thread here as changing thread status to answered and move it to Oracle Discussion Forums » Application Development in PL/SQL » SQL Developer (Not for general SQL/PLSQL questions) which is seeded dedicated forum site.
Regard
Helios -
Sql developer search functionality could be better
the search window closes after the first match,
when I am looking for all matches for a string, it takes more time.
There are plenty of example for good search functionality, with what I have experienced , the search feature in TEXTPAD is simple and works well.
oralce sql developer 2.1.1.64
I hope oracle recognizances this enhancement.
- DineshHave you tried using any of the shortcut keys to aid in your searching?
Alt-F3 : Find Next Result
Shift-F3 : Find Previous Result
(In a SQL Worksheet) Ctrl-F Brings the search menu back up
(In a Code Editor Window) Ctrl-F Brings you to the search bar at the top of the editor. Ctrl-F twice will bring the search menu back up. -
SQL Developer 1.5.1 - warning messages generated by CREATE TABLE
Hi,
Have an issue with a CREATE TABLE statement - it works correctly, but generates a warning message when used in SQL Developer (1.2 or 1.5.1). Full test case below:
Setup:
drop table samplenames;
drop table customers;
drop table phones;
drop table customers_phone;
drop sequence primkey;
create table samplenames
(name VARCHAR2(10));
insert into samplenames values ('dan');
insert into samplenames values ('joe');
insert into samplenames values ('bob');
insert into samplenames values ('sam');
insert into samplenames values ('weslington');
insert into samplenames values ('sue');
insert into samplenames values ('ann');
insert into samplenames values ('mary');
insert into samplenames values ('pam');
insert into samplenames values ('lucy');
create sequence primkey
start with 1000000
increment by 1;
create table customers as
select primkey.nextval as cust_id,
tmp1.name || tmp2.name as first_name,
tmp3.name || tmp4.name || tmp5.name as last_name
from samplenames tmp1,
samplenames tmp2,
samplenames tmp3,
samplenames tmp4,
samplenames tmp5;
CREATE TABLE PHONES AS
SELECT cust_id, 'H' as phn_loc, trunc(dbms_random.value(100,999)) as area_cde,
trunc(dbms_random.value(1000000,9999999)) as phn_num
FROM customers;
INSERT INTO PHONES
SELECT cust_id, 'B' as phn_loc, trunc(dbms_random.value(100,999)) as area_cde,
trunc(dbms_random.value(1000000,9999999)) as phn_num
FROM customers;
--randomly delete ~10% of records to make sure nulls are handled correctly.
delete from phones
where MOD(area_cde + phn_num, 10) = 0;
create table statement (there are legacy reasons for why this is written the way it is):
CREATE TABLE customers_phone NOLOGGING AS
SELECT cst.*,
piv.HOME_PHONE,
piv.WORK_PHONE
FROM (SELECT cust_id,
MAX(decode(phn_loc, 'H', '(' || area_cde || ') ' ||
substr(phn_num,1,3) || '-' || substr(phn_num,4,4), NULL)) AS HOME_PHONE,
MAX(decode(phn_loc, 'B', '(' || area_cde || ') ' ||
substr(phn_num,1,3) || '-' || substr(phn_num,4,4), NULL)) AS WORK_PHONE
FROM phones phn
WHERE phn_loc IN ('H', 'B')
AND cust_id IS NOT NULL
AND EXISTS (SELECT NULL
FROM customers
WHERE cust_id = phn.cust_id)
GROUP BY cust_id) piv,
customers cst
WHERE cst.cust_id = piv.cust_id (+)
Warning message output:
"Error starting at line 1 in command:
CREATE TABLE customers_phone NOLOGGING AS
SELECT cst.*,
piv.HOME_PHONE,
piv.WORK_PHONE
FROM (SELECT cust_id,
MAX(decode(phn_loc, 'H', '(' || area_cde || ') ' || substr(phn_num,1,3) || '-' || substr(phn_num,4,4), NULL)) AS HOME_PHONE,
MAX(decode(phn_loc, 'B', '(' || area_cde || ') ' || substr(phn_num,1,3) || '-' || substr(phn_num,4,4), NULL)) AS WORK_PHONE
FROM phones phn
WHERE phn_loc IN ('H', 'B')
AND cust_id IS NOT NULL
AND EXISTS (SELECT NULL
FROM customers
WHERE cust_id = phn.cust_id)
GROUP BY cust_id) piv,
customers cst
WHERE cst.cust_id = piv.cust_id (+)
Error report:
SQL Command: CREATE TABLE
Failed: Warning: execution completed with warning"
I am on 10.2.0.3. The CREATE TABLE always completes successfully, but the warning bugs me, and I have had no success tracking it down since there is no associated numberr.
Anyone have any ideas?Hi ,
The Oracle JDBC driver is returning this warning so I will be logging an issue with them, but for the moment SQL Developer will continue to report the warning as is.
The reason for the warning is not clear or documented as far as I can tell,
but I have replicated the issue with a simpler testcase which makes it easier to have a guess about the issue :)
----START
DROP TABLE sourcetable ;
CREATE TABLE sourcetable(col1 char);
INSERT INTO sourcetable VALUES('M');
DROP TABLE customers_phone;
CREATE TABLE customers_phone AS
SELECT MAX(decode(col1, 'm','OK' , NULL)) COLALIAS
FROM sourcetable;
----END
The warning occurs in the above script in SQL Developer , but not in SQL*Plus.
The warning disappears when we change 'm' to 'M'.
The warning disappears when we change NULL to 'OK2'
In all cases the table creates successfully and the appropriate values inserted.
My gut feeling is ...
During the definition of customers_phone, Oracle has to work out what the COLALIAS datatype is.
When it sees NULL as the only alternative (as sourcetable.col1 = 'M' not 'm') it throws up a warning. It then has to rely on the 'OK' value to define the COLALIAS datatype, even though the 'OK' value wont be inserted as sourcetable.col1 = 'M' and not 'm'. So Oracle makes the correct decision to define the COLALIAS as VARCHAR2(2), but the warning is just to say it had to use the alternative value to define the column.
Why SQL*Plus does not report it and JDBC does, I'm not sure. Either way it doesn't look like a real issue.
Again, this is just a guess and not a fact.
Just though an update was in order.
Regards,
Dermot. -
SQL Developer 1.5 and JDK 1.6_Update 10 - no connections tab and DB wizard
Hello,
PLS. HELP!
I have installed JDK u10 and SQL Developer 1.5 (latest available version from Oracle) on my Windows Vista Sp1 PC (with Oracle 10g Instant Client).
When I start SQL Developer nothing happens,
I can neither create a new SQL file, nor a new SQL connection nor can I change any db settings in the preferences dialog.
When I click on the Tools/SQL Worksheet menu entry I receive the following error:
java.lang.NullPointerException
at oracle.dbtools.raptor.controls.ConnectionPanelUI.listConnections(ConnectionPanelUI.java:426)
at oracle.dbtools.raptor.controls.ConnectionPanelUI.resetConnections(ConnectionPanelUI.java:440)
at oracle.dbtools.raptor.controls.ConnectionPanelUI.<init>(ConnectionPanelUI.java:120)
at oracle.dbtools.raptor.controls.ConnectionPanelUI.<init>(ConnectionPanelUI.java:101)
at oracle.dbtools.raptor.controls.ConnectionSelectorUI.<init>(ConnectionSelectorUI.java:36)
at oracle.dbtools.raptor.controls.ConnectionSelectorUI.getConnection(ConnectionSelectorUI.java:59)
at oracle.dbtools.raptor.controls.ConnectionSelectorUI.getConnection(ConnectionSelectorUI.java:42)
at oracle.dbtools.sqlworksheet.sqlview.SqlEditorWizard.invoke(SqlEditorWizard.java:107)
at oracle.ide.wizard.WizardManager.invokeWizard(WizardManager.java:317)
at oracle.dbtools.sqlworksheet.sqlview.SqlEditorAddin$2.actionPerformed(SqlEditorAddin.java:249)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
at java.awt.Component.processMouseEvent(Component.java:6134)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3265)
at java.awt.Component.processEvent(Component.java:5899)
at java.awt.Container.processEvent(Container.java:2023)
at java.awt.Component.dispatchEventImpl(Component.java:4501)
at java.awt.Container.dispatchEventImpl(Container.java:2081)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4301)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3965)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3895)
at java.awt.Container.dispatchEventImpl(Container.java:2067)
at java.awt.Window.dispatchEventImpl(Window.java:2458)
at java.awt.Component.dispatchEvent(Component.java:4331)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
I appreciate every hint.
Thanks beforehand,
StefanI don't recommend trying 1.2, as 1.5.1 is being used by many on Vista and going back to 1.2, means you lose out on much of the new 1.5 functionality.
Let's try to track down the Vista issues instead.
We have found that some users have solved screen painting issues by using JDK 1.6 as the minimum. It seems you have done that. (However, K able seems to be doing fine on the 1.5 JDK.
Can you try the download and install again?
Sue -
SQL Developer 1.5.4: "Keep alive" setting to keep connections open?
Is there any way to configure SQL Developer 1.5.4 such that it "pings" the server every now then to keep the connection open?
It's very frustrating to be working on a script, step away from it for a while, and have SQL Developer freeze when trying to execute the next SQL statement.
What can I do?
My workaround--execute a "dummy" SQL statement like "select * from dual;" every now and then to keep a connection open.
Thanks.
DanaI have had this problem till I had a RAM upgrade.
Since I have had the upgrade JDeveloper also responds well.
A way to check is via task manager, if PF usage is more than you physical RAM size it is a indicator that you need more RAM or shut down some application that is hogging memory.
Just to rule out if its not some other problem, have you tried working in SQL Developer running by itself or with one other program.
Regards
Edited by: io-into oracle on Jun 24, 2009 11:39 AM -
SQL Developer 4.0 EA2 -- Cannot use OpenLDAP with LDAP connect option
Hi,
I've got OpenLDAP setup to work with my Oracle clients, to serve up TNS connect strings, in lieu of having tnsnames.ora files scattered about hundreds of servers.
This is working fine with 10g/11g, both full and instant clients, no problem.
Now, I'm trying to configure SQL Developer 4.0 EA2 working with it, as well.
When I attempt to do so, I'm able to select the "LDAP" option in "Connection Type", and the "LDAP Server" drop down list is correctly populated with my LDAP server, from ldap.ora.
However, when I select it, I get the following error:
Status : Failure -[LDAP: error code 32 - No Such Object]
Now, I've done some research, and I monitored the slapd.log file, which shows me the following:
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 fd=16 ACCEPT from IP=192.168.125.1:63781 (IP=0.0.0.0:389)
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=0 BIND dn="" method=128
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=0 RESULT tag=97 err=0 text=
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=1 SRCH base="" scope=2 deref=0 filter="(objectClass=orclContext)"
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=1 SEARCH RESULT tag=101 err=32 nentries=0 text=
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 op=2 UNBIND
Sep 18 02:43:35 einstein slapd[2779]: conn=1034 fd=16 closed
Which is a lot more detail, but reflects the corresponding error code, (32 - No Such Object).
After doing some testing with ldapsearch, I've been able to replicate what SQL Developer is doing, and get the exact same error.
That ldapsearch command is:
ldapsearch -h einstein -p 389 -c -x -D "" -b "" "(objectClass=orclContext)"
Looking in the slapd.log file, I find an identical error to what is produced from SQL Developer.
Further, the query that SQL Developer wants to do can be successfully done with the following ldapsearch:
ldapsearch -h einstein -p 389 -c -x -D "" -b "dc=proquest,dc=com" "(objectClass=orclContext)"
So, it seems the problem is with the fact that SQL Developer is not supplying a search base.
I'm no LDAP expert, and I'm really not sure where to turn next....
Is there a SQL Developer option that allows me to set that search base? Is there a configuration I'm missing on the LDAP server configuration?
Thanks,
-MarkWell, that didn't take long. I managed to find a solution to the problem.
It comes down to the fact that SQL Developer doesn't supply a search base, and my LDAP server didn't have a default search base defined.
When I edited slapd.conf (the OpenLDAP config file) and added a "defaultsearchbase" parameter, and bounced the LDAP server, everything started to work.
I now have a working configuration with OpenLDAP and SQL Developer.
I'll mark this discussion as closed.
-Mark -
SQL Developer Version 1.5.1 Build MAIN-5440 Imported Connections missing
I have a problem using SQL Developer Version 1.5.1 Build MAIN-5440. I have successfully imported connections from my previous version of SQL Developer. After I restart, all the connections I have imported has been gone. I tried to import the connections but got an error message:
java.lang.NullPointerException
at oracle.jdeveloper.db.DatabaseConnections.getReferenceable(DatabaseConnections.java:695)
at oracle.jdeveloper.db.DatabaseConnections.addConnection(DatabaseConnections.java:762)
at oracle.dbtools.raptor.connections.ConnectionGrinder.doImportExport(ConnectionGrinder.java:243)
at oracle.dbtools.raptor.connections.ConnectionGrinder.invoke(ConnectionGrinder.java:117)
at oracle.dbtools.raptor.navigator.DatabaseNavigatorController.handleEvent(DatabaseNavigatorController.java:200)
at oracle.ide.controller.IdeAction.performAction(IdeAction.java:524)
at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:855)
at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:496)
at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
at java.awt.Component.processMouseEvent(Component.java:5488)
at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
at java.awt.Component.processEvent(Component.java:5253)
at java.awt.Container.processEvent(Container.java:1966)
at java.awt.Component.dispatchEventImpl(Component.java:3955)
at java.awt.Container.dispatchEventImpl(Container.java:2024)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
at java.awt.Container.dispatchEventImpl(Container.java:2010)
at java.awt.Window.dispatchEventImpl(Window.java:1774)
at java.awt.Component.dispatchEvent(Component.java:3803)
at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
I tried to create a new connections. I can test the newly created connections but cannot save it.This bug was fixed in SqlDev 2.1.1. You'll find this build on our homepage.
-Raghu -
[4.0] Production SQL Developer hangs when attempting to expand Java in the Connection Navigator
Folks,
I'm running production SQL Developer on Oracle Linux 5.8 and whenever I click the Java link in the Connections Navigator with a SYS AS SYSDBA connection SQL Developer hangs.
Oracle Enterprise Edition 11.2.0.1.0
SQLDeveloper 4.0.0.13.80
Oracle Linux 6
JDK Version 1.7.0_45
Doing the same thing with user SCOTT (no SYSDBA) works fine (although there are not any Java objects).
Thanks,
RichThis has been logged as a bug.
The bad plan/performance has been logged as a bug. SQL Developer didn't hang for me - I was able to cancel the query using the Task Progress panel. -
SQL Developer Data Modeler? Is possible to create table partitions using
Hi,
I have been surfing on table properties and I have been able to see where to define partitions on table. It's possible to do it?
ThanksYou need to open physical model and you can create partitions there.
Philip -
Oracle 9i - Is there a possiblity to avoid creating a function?
Here is the structure of my table.
Table users.
USER_ID, NT_ID, F_NAME, L_NAME
There are two ways to fetch the name of the user.
SELECT f_name || l_name from Users
WHERE user_id = 'ABHIJIT';
OR
SELECT f_name || l_name from Users
WHERE nt_id = '800001';Due to a design flaw, the audit tables in the system contain either the user_id or the nt_id in one of the columns.
So I wrote a function like this.
/*This is an anonymous PL/SQL block*/
declare
V_USER VARCHAR2(60) := '';
BEGIN
SELECT F_NAME || ' ' || L_NAME
INTO V_USER
FROM USERS
WHERE USER_ID = '&a';
DBMS_OUTPUT.PUT_LINE(V_USER);
EXCEPTION
WHEN NO_DATA_FOUND THEN
SELECT F_NAME || ' ' || L_NAME
INTO V_USER
FROM USERS
WHERE NT_ID = '&a';
DBMS_OUTPUT.PUT_LINE(V_USER);
WHEN OTHERS THEN
DBMS_OUTPUT.PUT_LINE(V_USER);
END;
Is there anyway I could utilize a join instead of a function?HI.. one option can be..
SELECT NAME
INTO V_USER
FROM (SELECT F_NAME || ' ' || L_NAME NAME
FROM USERS
WHERE USER_ID = '&a'
UNION ALL
SELECT F_NAME || ' ' || L_NAME
FROM USERS
WHERE NT_ID = '&a';
AND NOT EXISTS ( SELECT 1
FROM USERS
WHERE USER_ID = '&a'));Not tested -
Hi, I'm running the following setup:
Mac OS X 10.8.4
Virtual Box 4.2.16 r86992
Oracle Developer Days (don't know the version, just downloaded it)
SQL Developer 3.2.20.09
Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
$ ping 192.168.56.101
PING 192.168.56.101 (192.168.56.101): 56 data bytes
64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
^C
--- 192.168.56.101 ping statistics ---
1 packets transmitted, 1 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
$ telnet 192.168.56.101 1521
Trying 192.168.56.101...
Connected to 192.168.56.101.
Escape character is '^]'.
asdf
asdf
Connection closed by foreign host.
When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760dHi Ali,
This may be of varoius reasons..
Is the database that you are connecting on the same PC?
You have specified Hostname: localhost.
If not please replace it with the IP of that server.
Else please check whether the database listener is started or not. if not please start the listener.
Check the SID by tnsping command.
Hope this will help you..
Thanks
Ashok -
View jobs with SQL Developer and export to file with delimiter
Hi,
is there a way to view, create and alter my database jobs with SQL developer?
And is it possible to export tables, views or simple queries to file delimited different from the CSV standard?
Diego.Hi and Welcome to the Forum!!
To select data from a table or a view you must use the SELECT sql command. Example to get the data from your view you can
select ZMATNUM,ZMATCUR,ZMATATTR from ZMATERIALAs you have said you are using SQL Developer just execute the above query in your sql developer and it will show the data. Right click the grid and export the data to excel file. -
How to browse Java Source in PL/SQL Developer
As I use PL/SQL Developer for developing, for the first time I've just tried to write and compile a java source.
After compiling the java source succesfully, I can see it by selecting it from the system table USER_SOURCE where it's defined as TYPE JAVA SOURCE, but I'd like to know where and if it's possible to browse it in the left window list of the panel of PL/SQL Developer like it happens for Procedures, Packages, ... I mean is there a way to edit the java source created without selecting it from USER_SOURCE but in a better way as it's possibile for the procedures in PL/SQL Developer?
ThanksYes, It is possible. Check the option Tools->Browser. Then in the browser you can find it.
-
Problem in connecting SQL developer to Oracle database
Hi,I don't know this is the correct forum for my problem
I Just installed Oracle Sql developer 3.2.I encountered a problem while creating a new connection with Oracle database 11g..
The error message says "Status : Failure -Test failed: The Network Adapter could not establish the connection"..
The command response as follows
lsnrctl stop
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 31-OCT-2013 21:52
:56
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
TNS-01190: The user is not authorized to execute the requested listener command
lsnrctl start
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 31-OCT-2013 21:55
:49
Copyright (c) 1991, 2010, Oracle. All rights reserved.
TNS-01106: Listener using listener name LISTENER has already been started
lsnrctl status
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 31-OCT-2013 21:57
:07
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 64-bit Windows: Version 11.2.0.1.0 - Produ
ction
Start Date 31-OCT-2013 20:57:07
Uptime 0 days 1 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File C:\app\RIYAS\product\11.2.0\dbhome_1\network\admin\lis
tener.ora
Listener Log File c:\app\riyas\diag\tnslsnr\RIYAS-PC\listener\alert\log.
xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1521ipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=127.0.0.1)(PORT=1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
lsnrctl service
LSNRCTL for 64-bit Windows: Version 11.2.0.1.0 - Production on 31-OCT-2013 21:58
:28
Copyright (c) 1991, 2010, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1521)))
Services Summary...
Service "CLRExtProc" has 1 instance(s).
Instance "CLRExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "orcl" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:102 refused:0 state:ready
LOCAL SERVER
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1022 state:ready
DISPATCHER <machine: RIYAS-PC, pid: 1828>
(ADDRESS=(PROTOCOL=tcp)(HOST=RIYAS-PC)(PORT=49911))
The command completed successfully
set
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\RIYAS\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=RIYAS-PC
ComSpec=C:\windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\RIYAS
LOCALAPPDATA=C:\Users\RIYAS\AppData\Local
LOGONSERVER=\\RIYAS-PC
NUMBER_OF_PROCESSORS=4
OS=Windows_NT
Path=C:\app\RIYAS\product\11.2.0\dbhome_1\bin;C:\app\RIYAS\product\11.2.0\dbhome
_2\bin;C:\Program Files (x86)\PC Connectivity Solution\;C:\Program Files\Common
Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsof
t Shared\Windows Live;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\
Program Files (x86)\Intel\iCLS Client\;C:\Program Files\Intel\iCLS Client\;C:\wi
ndows\system32;C:\windows;C:\windows\System32\Wbem;C:\windows\System32\WindowsPo
werShell\v1.0\;C:\Program Files\Intel\Intel(R) Management Engine Components\DAL;
C:\Program Files\Intel\Intel(R) Management Engine Components\IPT;C:\Program File
s (x86)\Intel\Intel(R) Management Engine Components\DAL;C:\Program Files (x86)\I
ntel\Intel(R) Management Engine Components\IPT;C:\Program Files (x86)\Intel\Open
CL SDK\2.0\bin\x86;C:\Program Files (x86)\Intel\OpenCL SDK\2.0\bin\x64;C:\Progra
m Files\Intel\WiFi\bin\;C:\Program Files\Common Files\Intel\WirelessCommon\;C:\P
rogram Files (x86)\Windows Live\Shared
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 58 Stepping 9, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=3a09
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\windows
TEMP=C:\Users\RIYAS\AppData\Local\Temp
TMP=C:\Users\RIYAS\AppData\Local\Temp
USERDOMAIN=RIYAS-PC
USERNAME=RIYAS
USERPROFILE=C:\Users\RIYAS
windir=C:\windows
windows_tracing_flags=3
windows_tracing_logfile=C:\BVTBin\Tests\installpackage\csilogfile.log
Pls help..You don't say what you have done to set up a connection.
This error is usually caused by something like using the wrong host name, or port number.
Maybe you are looking for
-
Safari 2.0.4 It constantly locks up (not responding) I'd like to give it a response! It quits while deleting email repeatedly. I'd like to delete IT! If this is BETA is there a higher one I can download and how and do I need to get rid of the 2.0.4?
-
How to connect my HP Officejet 4500 G510n-z to work wireless.
I recently purchased the HP Officejet 4500 G510n-z, i have it connected to my netgear router which i can see that it is through netgear genie, but my computer will not connect. i have tried turning off my firewall, i have uninstalled and reinstalled
-
We want to clear out our inventory database and start again. Is there a way to do this? Thanks
-
Everytime I open adobe to view anything it self closes after about 15 seconds...how do I fix this?
Everytime I open adobe it self closes in about 15 seconds...I don't know how to correct. I have updated and that has not helped.
-
Hi , How to get - sign in left side of a varable. Say for exaple a = 100- report will show 100- but i want it like -100. how i can i get ?. Thanks, Regd\jithendra