SQL Developer: View menu selections Reports and Connections not working

Downloaded latest SQL Developer May 9 updated version and my dropdown selections from the View menu for Connections, and View Reports do not work. However, Snippets does appear when selected. Hate to lose some of the User Defined reports I had created. Any help would be appreciated.

Don't know if I get what you're saying: the entries Connections and Reports from the View menu don't work?
On top of the connection tree, if you get one, aren't there the two tabs with these options?
If you're unable to view the whole tree, you're installation would be corrupted. Install from scratch in a separate folder, first without migration to see if that resolves the issue. Then you could do the same with migration to retrieve all previous settings and connections.
K.

Similar Messages

Sql Developer 1.5.1 Drag and drop not working ?

Hi,
I've just installed this version and while the cursor changes when I drag a table to the editor, notjhing actuually happens.
I've changed the default setting (select) to prompt every time, but it makes no difference.
Is there something I should be setting to get this to work ?
Thanks,
Graham
10g on XP

OK, for the powers that be, if they ever use these forums, here is what I get when trying to drag and drop a table onto an empty worksheet.
Exception in thread "AWT-EventQueue-0" oracle.classloader.util.AnnotatedNoClassD
efFoundError:
Missing class: org.antlr.stringtemplate.CommonGroupLoader
Dependent class: oracle.dbtools.raptor.controls.DnDDropGenerator
Loader: main:11.0
Code-Source: /C:/Program Files/sqldeveloper/sqldeveloper/extensions/
oracle.sqldeveloper.jar
Configuration: system property C:\Program Files\sqldeveloper\sqldevelo
per\extensions\oracle.sqldeveloper.jar
The missing class is not available from any code-source or loader in the system.
at oracle.classloader.PolicyClassLoader.handleClassNotFound (PolicyClass
Loader.java:2176) [/C:/Program%20Files/sqldeveloper/j2ee/home/lib/pcl.jar, by su
n.misc.Launcher$AppClassLoader@10469011]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLo
ader.java:1729) [/C:/Program%20Files/sqldeveloper/j2ee/home/lib/pcl.jar, by sun.
misc.Launcher$AppClassLoader@10469011]
at oracle.classloader.PolicyClassLoader.access$000 (PolicyClassLoader.ja
va:143) [/C:/Program%20Files/sqldeveloper/j2ee/home/lib/pcl.jar, by sun.misc.Lau
ncher$AppClassLoader@10469011]
at oracle.classloader.PolicyClassLoader$LoadClassAction.run (PolicyClass
Loader.java:331) [/C:/Program%20Files/sqldeveloper/j2ee/home/lib/pcl.jar, by sun
.misc.Launcher$AppClassLoader@10469011]
at java.security.AccessController.doPrivileged (Native method) [unknown,
by unknown]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.jav
a:1688) [/C:/Program%20Files/sqldeveloper/j2ee/home/lib/pcl.jar, by sun.misc.Lau
ncher$AppClassLoader@10469011]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.jav
a:1670) [/C:/Program%20Files/sqldeveloper/j2ee/home/lib/pcl.jar, by sun.misc.Lau
ncher$AppClassLoader@10469011]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre b
ootstrap, by jre.bootstrap:1.5.0_12]
at oracle.dbtools.raptor.controls.DnDDropGenerator.loadTemplates (DnDDro
pGenerator.java:620) [/C:/Program Files/sqldeveloper/sqldeveloper/extensions/ora
cle.sqldeveloper.jar (from system property C:\Program Files\sqldeveloper\sqldeve
loper\extensions\oracle.sqldeveloper.jar), by main:11.0]
at oracle.dbtools.raptor.controls.DnDDropGenerator.generate (DnDDropGene
rator.java:521) [/C:/Program Files/sqldeveloper/sqldeveloper/extensions/oracle.s
qldeveloper.jar (from system property C:\Program Files\sqldeveloper\sqldeveloper
\extensions\oracle.sqldeveloper.jar), by main:11.0]
at oracle.dbtools.raptor.controls.RaptorDnD.nodeDrop (RaptorDnD.java:197
) [/C:/Program Files/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.ja
r (from system property C:\Program Files\sqldeveloper\sqldeveloper\extensions\or
acle.sqldeveloper.jar), by main:11.0]
at oracle.dbtools.raptor.controls.RaptorDnD.drop (RaptorDnD.java:160) [/
C:/Program Files/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.jar (f
rom system property C:\Program Files\sqldeveloper\sqldeveloper\extensions\oracle
.sqldeveloper.jar), by main:11.0]
at oracle.dbtools.raptor.controls.RaptorDnD.drop (RaptorDnD.java:141) [/
C:/Program Files/sqldeveloper/sqldeveloper/extensions/oracle.sqldeveloper.jar (f
rom system property C:\Program Files\sqldeveloper\sqldeveloper\extensions\oracle
.sqldeveloper.jar), by main:11.0]
at java.awt.dnd.DropTarget.drop (DropTarget.java:430) [jre bootstrap, by
jre.bootstrap:1.5.0_12]
at sun.awt.dnd.SunDropTargetContextPeer.processDropMessage (SunDropTarge
tContextPeer.java:500) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at sun.awt.dnd.SunDropTargetContextPeer.access$800 (SunDropTargetContext
Peer.java:53) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchDropEven
t (SunDropTargetContextPeer.java:812) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at sun.awt.dnd.SunDropTargetContextPeer$EventDispatcher.dispatchEvent (S
unDropTargetContextPeer.java:736) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at sun.awt.dnd.SunDropTargetEvent.dispatch (SunDropTargetEvent.java:29)
[jre bootstrap, by jre.bootstrap:1.5.0_12]
at java.awt.Component.dispatchEventImpl (Component.java:3842) [jre boots
trap, by jre.bootstrap:1.5.0_12]
at java.awt.Container.dispatchEventImpl (Container.java:2024) [jre boots
trap, by jre.bootstrap:1.5.0_12]
at java.awt.Component.dispatchEvent (Component.java:3819) [jre bootstrap
, by jre.bootstrap:1.5.0_12]
at java.awt.LightweightDispatcher.retargetMouseEvent (Container.java:421
2) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at java.awt.LightweightDispatcher.processDropTargetEvent (Container.java
:3963) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at java.awt.LightweightDispatcher.dispatchEvent (Container.java:3817) [j
re bootstrap, by jre.bootstrap:1.5.0_12]
at java.awt.Container.dispatchEventImpl (Container.java:2010) [jre boots
trap, by jre.bootstrap:1.5.0_12]
at java.awt.Window.dispatchEventImpl (Window.java:1791) [jre bootstrap,
by jre.bootstrap:1.5.0_12]
at java.awt.Component.dispatchEvent (Component.java:3819) [jre bootstrap
, by jre.bootstrap:1.5.0_12]
at java.awt.EventQueue.dispatchEvent (EventQueue.java:463) [jre bootstra
p, by jre.bootstrap:1.5.0_12]
at java.awt.EventDispatchThread.pumpOneEventForHierarchy (EventDispatchT
hread.java:242) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at java.awt.EventDispatchThread.pumpEventsForHierarchy (EventDispatchThr
ead.java:163) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at java.awt.EventDispatchThread.pumpEvents (EventDispatchThread.java:157
) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at java.awt.EventDispatchThread.pumpEvents (EventDispatchThread.java:149
) [jre bootstrap, by jre.bootstrap:1.5.0_12]
at java.awt.EventDispatchThread.run (EventDispatchThread.java:110) [jre
bootstrap, by jre.bootstrap:1.5.0_12]

Reporting and analysis not working in workspace

the startup document specified does not exist in the repository. select a new startup document on the general preference tab.
when i click ok
a not found error occurred communicating with server
click show details
uri: http://server:19000/raframework/conf/toolsconfig.xml
state 404 not found
and then when i click preference, the reporting and analysis framework seems to be not working because for example for financial reporting and web analysis, we can see things like $(/raframework.....epmstatic/raframework.....etc)
any help would be fine regarding waht i could have done wrong
thanks

Has it ever worked, have you checked the logs, have you logged into Oracle Support and had a look the documents available e.g. 1422178.1
Cheers
John
http://john-goodwin.blogspot.com/

SQL Developer 1.1 Patch 3 still does not work on 64-bit Windows

There has been a long-standing problem with SQL Developer 1.1 not working on 64-bit versions of Windows. When sqldeveloper.exe is executed, a very unhelpful error dialog stating "The application failed to initialize properly (0xc00000018). Click on OK to terminate the application" is displayed.
While there is a workaround that involves running the sqldeveloper.bat file in the \sqldeveloper\bin subdirectory, it is a bit inconvenient and requires the user to discover this workaround. Furthermore, SQL Developer 1.0 did not have this problem, so it is a bit puzzling as to why the problem was introduced with SQL Developer 1.1 and why it is still not fixed with the latest patch.

I can confirm that we have a fix for this problem. I'm not sure when this fix will be available in SQL Developer.
The bug was introduced in 1.1 due to optimizations in the way that the native Windows launcher works to better support products like SQL Developer.
Thanks,
Brian

Email counter and connection not working correctly after updates

How do I fix the email counter on my dock bar it shows that I have 214 unread and they have all been read?
Also, my email is constantly asking me to enter my password to establish connection this is after I have been working in email and sending and receiving emails fine. Does anyone have a fix for this?

I did find the problem with the counter. It had to do with my Gmail account not my other email account. I still haven't found the answer to the question of my connections to my email accounts are dropping and need me to enter my password though. I have made sure that the passwords is correct that is entered.

How to show all view tab (Main Report and all Sub Report) in Visual FoxPro 9

I use ActiveX from Crystal Report Developer XI for viewer in Visual FoxPro 9 and I already know how to show Main Report by using command:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the MyReport.rpt there is two subreport name :
1. MySubReport1
2. MySubReport2
My Question is :
How to show all view tab (Main Report and all Sub Report) at the 1st time we call ViewReport?
I try to using command :
oRptRun=createobject("CrystalRuntime.Application")
oRptView=thisform.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub=oRptOpen.OpenSubreport("MySubReport1")
oRptSub=oRptOpen.OpenSubreport("MySubReport2")
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
but only show Main Report (view tab name : Preview)?
Did I miss any command before I call oRptView.ViewReport?

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

When will the SAP Mobile BI Android SDK to embed analytic views (Web Intelligence reports and Dashboards) in custom mobile Android App be supported/

hi all,
SAP Mobile BI IOS SDK provides such SDK to embed analytic views (Web Intelligence reports and Dashboards) supported by the SAP BI application inside your own custom mobile applications, while Android SDK does not provide such sdk. I would like to know if there is any plan or roadmap to support this interface in Android SDK?

Thank you Vishwanath for your reply. We already developed an Android App, and just want to embed and open SAP BO report directly inside our own App, instead of launching SAP Mobile BI App.

How to show view tab Main Report and all of Sub Report in one action through Visual FoxPro

How to show all view tab (Main Report and all of Sub Report) in one action.
I already know how to show Main Report with this code sample:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=this.Parent.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Inside the 'MyReport.rpt' it has 2 subreports:
1. MySubReport_1
2. MySubReport_2
I try to show MySubReport_1 and MySubReport_2 together with their own Main Report with this code sample:
oRptRun=createobject("CrystalRuntime.Application")
oRptView=this.Parent.oleRptViewer
oRptOpen=oRptRun.OpenReport('MyReport.rpt')
oRptSub1=oRptOpen.OpenSubreport('MySubReport_1')
oRptSub2=oRptOpen.OpenSubreport('MySubReport_2')
oRptView.ReportSource=oRptOpen
oRptView.ViewReport
Did I miss something because there was only view tab 'Preview' (Main Report) shown without view tab MySubReport_1 and MySubReport_2.
Thank you.

Your right, there is only one tab to view the report.
To open the subreports you will need to click on them in the main report. I don't know of a way to open them programmatically like you are doing here
http://diamond.businessobjects.com/robhorne</a>

Menu Bar and Keyboard not working

Hi,
My Ipad has encountered some very annyoing issues. Worked fine for 4/5 weeks since purchase and now this has started to happen. I am unable to use Menu Bar at top of screen when Ipad is held in Portrait position. For example when in Safari, cannot input new email address, use back button, use X button. And its same with other applications - when in settings, the options on menu bar at top are not working - As if its Greyed out and not accessible. When I flip Ipad into Landscape position, these options on Menu Bar are then working - very fustrating.
Also same issue affecting keyboard. When holding Ipad in landscape position some keys do not work and they do when Ipad flipped back into Portrait position.
Means i am constantly turning Ipad around in my hand endlessly trying to get it to function making it pointless to use. Only setting that I can see that may be affecting this is Lock rotation - but same issue with this selected or not.
Anyway any help appreciated as Im not very tech savvy and only have Ipad few weeks. I've downloaded no apps, only used it for browsing internet so far. I have taken some photos and videos and really would hate to lose those.
All comments appreciated! Thanks in advance.

Forgot to mention that Ipad also keeps telling me that I cannot get Mail when I click on Mail icon - That Connection to server failed?

SELECT INTO ( variable ) STATEMENTS NOT WORKING FOR SYBASE TABLE AS VIEW

Dear Experts,
We have connected our 9i db with Sybase db using Hs connectivity.
and then we have create the view in oracle db for SYBASE_TABLE as SYBASE_TABLE_VIEW.
ALL THE INSERT, UPDATE AND DELETE COMMANDS ARE WORKING BUT THE
select Into (variable) is not working.
Please help to resolve the select into statment which is in BOLD in the below routine
PLEASE NOTE! FORM WAS COMPILED SUCCESSFULLY AND FORM IS RUNNING BUT SELECT INTO COMMAND IS NOT WORKING.
Thanks & Regards
Eidy
PROCEDURE SRBL_INSERT IS
CURSOR SRBL IS
     SELECT impno,impcod,impnam
     from oracle_table1 a, oracle_table2 b
     WHERE a.impcod=b.empcod
     v_srpcod varchar2(5);
BEGIN
FOR rec in SRBL loop
     begin
select "im_code" into v_impcod
     from SYBASE_TABLE_VIEW
     where "im_code"=rec.impcod;
exception when no_data_found then
     v_srpcod:=null;
end;
END LOOP;
END;
Edited by: Eidy on Aug 16, 2010 11:28 AM

hellow
try this.
select "im_code" into v_impcod
from SYBASE_TABLE_VIEW
where "im_code"=rec.impcod;
v_srpcod := v_impcod ;
........

How do I change an IP address of SQL Server which is locally hosted and is not on cluster?

Hi All,
How do I change an IP address of SQL Server which is locally hosted and is not on cluster?
I am asking about IP for SQL Server, is there a way we can assign a different IP to SQL Server other than the server's(host) IP address? like the same what we do in a clustered env.
aa

Full explanation can seen here:
SQL Server: Configure Listening IP, Port, and Named pipe
http://ariely.info/Blog/tabid/83/EntryId/151/SQL-Server-Configure-Listening-IP-Port-and-Named-pipe.aspx
[Personal Site] [Blog] [Facebook]

How do I move aiff files from the viewer to the timeline-it is not working when I try to drag and click or clicking on overwrite or insert in Final Cut Pro 7. Thanks

How do I move aiff files from the viewer to the timeline-it is not working when I click and drag or when I try to move the files to the overwrite or insert buttons-Thanks.

hi
You cannot move audio from the viewer
Mark your in and out points then in the browser grab hold of the audio tracks icon and drag that to the time line
PJ

While updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

while updating my ipad to new software through itunes it got stuck and does not work anymore - it just displays the screen with symbols of itunes and the cable to connect to it - help - what should i do?

Disconnect the iPad, do a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is 'appsolutely' safe!, reconnect and follow the prompts.
If that does not work then see here http://support.apple.com/kb/HT1808

HT201210 i restored my iphone 3gs to factory settins and now it says to connect to itunes when i turn my phone on i try to onnect to i tunes and its not working help asap

i restored my iphone 3gs to factory settings and now when i turn it on it says to connect it to itunes well i tried that and its not working then i tried to hold the power button for three seconds then the home button for ten seconds but still nothing please help asap

If iTunes doesn't recognize it, do this:
http://www.apple.com/support/ipad/assistant/itunes/

My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail. My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexp

My airport express has a blinking yellow light and is not working. I have tried resetting it a few times, to no avail.
My airport utility on my desktop detects it and will attempt to connect. However, after a few moments it says "An unexpected error occurred Try again."
I'm running Mavericks on a 24-inch 2007 mac, 2.4 GHz Intel Core 2 Duo, 4 GB 667 MHz DDR2 SDRAM, OS X 10.9.3 (13D65). The Airport Express is model A1264. I connect to it via an Airport Extreme with 7.6.4.
Thanks in advance.

I have the same problem with my airport express – a blinking yellow light and it is not working. I have tried resetting it a few times.
My airport utility detects it and try to connect. However, after a few moments it says "An unexpected error occurred Try again.
Airport Express is model A1143
And I have tried to connect with iPhone - same same.

SQL Developer: View menu selections Reports and Connections not working

Similar Messages

Maybe you are looking for