SQL Error: No more data to read from socket

Hi!
When executing a rather large CREATE OR REPLACE VIEW statement (116 lines of SQL code, a SELECT statement with 80 columns in the SELECT clause and 32 left joins in the FROM clause) we get the error in the title of the thread. Also, after once seeing the error, the connection is dead and we have to reconnect to be able to do anything. If the command is, however, shorter, it executes just fine.
This is all done in Oracle SQL Developer v.1.2.1.3213. We'd appreciate any help!

Yeah, this typically pops up after losing connection to the DB, due to internal error. I get those when overcomplicating code sometimes.
After reconnecting, does it still happen? Then try to rewrite or post to the dedicated {forum:id=75} forum.
Regards,
K.

Similar Messages

Error "java.sql.SQLRecoverableException: No more data to read from socket"

Hi,
We are getting the error "java.sql.SQLRecoverableException: No more data to read from socket" while we do a check print for our Disaster Recovery (DR) server. It was working fine in the production. There is no issue with the connectivity or printer as we are able to print to the printer.
Any input on this would be highly appreciated.
Thanks in Advance.

Please post the details of the application release, database version and OS.
We are getting the error "java.sql.SQLRecoverableException: No more data to read from socket" while we do a check print for our Disaster Recovery (DR) server. It was working fine in the production. There is no issue with the connectivity or printer as we are able to print to the printer.Please see these docs.
Oracle Applications 12.1.3 Upgrade Patch 9239090 Failed While Invoking Utility Wfxload - java.sql.SQLRecoverableException: No more data to read from socket [ID 1193744.1]
Error While Creating PO From Sourcing: Java.Sql.SQLRecoverableException: No More Data To Read From Socket [ID 1356792.1]
Adgendbc Fails With Database Connection Failure [ID 1302708.1]
Getting Exception Error While Approving Objectives From Manager Self Service [ID 1331535.1]
"No more data to read from socket" Exception when Running Create Settlement Batches [ID 1437170.1]
Thanks,
Hussein

Error -no more data to read from socket vendor code 17410

Hi everyone
I have installed a gateway on my server. My oracle database 11.1.0.7 is running on windows server 2008 and i am trying to connect to sql server 2005.
After creating the database link when i test the database link i get this error
no more data to read from socket vendor code 17410
can you please suggest me how to get rid of this error?????
thanks a many

enable gateway tracing by setting HS_FDS_TRCE_LEVEL=255 in your DG4MSQL configuration file. Then open a new SQL*Plus window and execute:
select user from dual@<dg4msql db link>;
A trace file is generated in the ORACLE_HOME/dg4msql/trace directory. Post its content.

Java.sql.SQLException: No more data to read from socket

Hello,
we're now facing some strange problem which is probably caused by some malfunctioned connections being present in connection pool. The MGP process is failing for some clients with following error message. During the MGP process, some users are processed without any problems and some encounter this exception. I tried to restart the DB and both OL servers (we have 2 OL servers, on one of them is running MGP), but it didn't help.
Some time before I restarted the servers, we were also occasionally facing "Server connections exceeded" error message, but I don't think this is relevant...
We're using 10gR2 OL servers and 10gR2 RDBMS.
Any ideas what could be wrong?
<pre>
Applied Record     Counts:
Insert Count     = 0
Update Count     = 0
Delete Count     = 0
Composed PubItems
(<PubItem Name>, <Duration     in Milli Seconds>):
JPOCZ_C$ALL_CLIENTS,16
JPOCZ_PA_STATESTOCKSUM,1484
JPOCZ_PA_MEMOS,31
JPOCZ_TASKMOTYPES,47
JPOCZ_PA_VISITDETAILS,16
JPOCZ_PA_STATESTOCK,859
JPOCZ_DISTRIBS,47
JPOCZ_ITEMPRICING,438
Compose Error:
java.sql.SQLException: No more data to read from socket
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:189)
     at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:231)
     at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:985)
     at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:746)
     at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:705)
     at oracle.jdbc.ttc7.Ocommoncall.receive(Ocommoncall.java:108)
     at oracle.jdbc.ttc7.TTC7Protocol.rollback(TTC7Protocol.java:427)
     at oracle.jdbc.driver.OracleConnection.rollback(OracleConnection.java:1410)
     at oracle.lite.sync.JupConnection.rollback(Unknown Source)
     at oracle.lite.sync.MGP$MGPG.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
</pre>

I'm not using localhost, but the host name. We just today notified some other network problems on this server and discovered there're 2 network cards - one of them which wasn't connected was configured for DHCP and the other one was configured properly with fixed IP address. We disabled the disconnected network card and it looks like the problems with other applications is solved so we'll se if the Mobile Server is also cured...

XI to jdbc error: No more data to read from socket

i have a XI to JDBC scenario, where a receiver JDBC communication channel sends a query to the database, i get an error in the response (from database) as:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'NAME' (structure 'STATEMENT'): java.sql.SQLException: No more data to read from socket</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

Hi Sudeep,
This error most likely occurs when you use DB connection pool, which I think is the case in XI. When the JDBC adapter tries to connect to the database and discovers that the connection has been timed out/lost, then this exception is generated. Please have a look of the connection settings of your JDBC adapter and also at the note 831162.
Cheers...
Vasu
<b>** REward POInts if found useful **</b>

Compile for Debug Results in "Error: No more data to read from socket"

I am testing the debugger in SQL Developer, and although I can compile objects normally (using the menu/tool bar options), when I compile a procedure for debug, I get this message:
Error: No more data to read from socket
There is no sql error message, just this statement.
I am using 1.5.1.54.40 on an XP SP2 machine. The database is hosted remotely.
Any advice is appreciated.
Thanks, Wolf Moritz

Weird, I was going to say that these are network or port issues, but then a quick look around popped this up. It may be related. SQL error 17410 No more data to read from socket

Sequence error: No more data to read from socket

We are getting the following error when inserting data into the center table. What does this error mean? We noticed if we take sequencing off the second table we do not get the error. ARe triggers for sequence are as follows.
begin
select db.insequence.nextval into :new.id from dual;
end;
begin
select db.centerseq.nextval into :new.id from dual;
end;
Thanks in advance.

Narsimha (guest) wrote:
: I am getting the following error:
: "No more data to read from Socket"
: I am using Oracle 8.0.3 + Jdk 1.1.5 + JDBC Driver 7.3.3.1.3
: Follwing is my simple program. I got struck here.
: <<< Please provide me the solution. >>>
: import java.sql.*;
: class JDBCTest{
: public static void main (String args []) throws SQLException,
: ClassNotFoundException{
: Class.forName ("oracle.jdbc.driver.OracleDriver");
: Connection conn =DriverManager.getConnection
: ("jdbc:oracle:thin:@myHost:1521:orcl","scott", "tiger");
: Statement stmt = conn.createStatement ();
: ResultSet rset = stmt.executeQuery ("select * from
FDMainList");
: while (rset.next ())
: System.out.println (rset.getString (1));
I have the same problem with thin jdbc driver against 8.0.3
server.
Try to use oci8 driver - You have to install sql*net8 client
first. It works for me.
Looking at:
http://technet.oracle.com/tech/java/access/info/jdbc_faq.htm#_1_
I think no thin driver supports 8.0.3 unfortunately.
null

PL-SQL JDBC -- No more data to read from socket Exception

I have a PL/SQL stored procedure which takes CURSOR as IN parameter.
I want to execute this procedure by passing a ResultSet object into it.
Below attached is the piece of code I am using.
When I execute I am getting the following exception ,
Thanks in advance
java.sql.SQLException: No more data to read from socket
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:857)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:731)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:690)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:373)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.ja
va:1446)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.jav
a:1371)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme
nt.java:1900)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePrepar
edStatement.java:363)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStat
ement.java:407)
at ECTTestClass.test16(ECTTestClass.java:500)
at ECTTestClass.main(ECTTestClass.java:51)
Statement st = con.createStatement();
String qry = "SELECT * FROM TAB1";
ResultSet rs = st.executeQuery(qry);
int cntr = 0;
while(rs.next()){
System.out.println("USER ID " + rs.getString("USER_ID"));
System.out.println("LICENSE " + rs.getString("LICENSE"));
cntr++;
System.out.println("No of rows " + cntr);
CallableStatement cst = con.prepareCall("{call PREM_TEMP.PREM_PROC(?)}");
cst.setObject(1,rs,OracleTypes.CURSOR);
System.out.println("set object...... successful");
cst.execute();
st.close();
cst.close();
con.close();

I have a PL/SQL stored procedure which takes CURSOR as IN parameter.
I want to execute this procedure by passing a ResultSet object into it.
Below attached is the piece of code I am using.
When I execute I am getting the following exception ,
Thanks in advance
java.sql.SQLException: No more data to read from socket
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:168)
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:210)
at oracle.jdbc.dbaccess.DBError.check_error(DBError.java:857)
at oracle.jdbc.ttc7.MAREngine.unmarshalUB1(MAREngine.java:731)
at oracle.jdbc.ttc7.MAREngine.unmarshalSB1(MAREngine.java:690)
at oracle.jdbc.ttc7.Oall7.receive(Oall7.java:373)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(TTC7Protocol.java:1405)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(TTC7Protocol.java:822
at oracle.jdbc.driver.OracleStatement.executeNonQuery(OracleStatement.ja
va:1446)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(OracleStatement.jav
a:1371)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStateme
nt.java:1900)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePrepar
edStatement.java:363)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStat
ement.java:407)
at ECTTestClass.test16(ECTTestClass.java:500)
at ECTTestClass.main(ECTTestClass.java:51)
Statement st = con.createStatement();
String qry = "SELECT * FROM TAB1";
ResultSet rs = st.executeQuery(qry);
int cntr = 0;
while(rs.next()){
System.out.println("USER ID " + rs.getString("USER_ID"));
System.out.println("LICENSE " + rs.getString("LICENSE"));
cntr++;
System.out.println("No of rows " + cntr);
CallableStatement cst = con.prepareCall("{call PREM_TEMP.PREM_PROC(?)}");
cst.setObject(1,rs,OracleTypes.CURSOR);
System.out.println("set object...... successful");
cst.execute();
st.close();
cst.close();
con.close();

ORACLE JDBC : java.sql.SQLException: No more data to read from socket

I have a problem with JDBC, SUN JavaWebServer2.0, and ORACLE: java.sql.SQLException: No more data to read from socket
On JWS2.0 + JDBC 1.22 ORACLE Thin Driver (classes111),
SunOS 5.7 Ultra-1 (JDBC-client), connecting to ORACLE 7.3.4.5.0:
after some successful selects, after about 1 minute, the following exception is thrown:
java.sql.SQLException: No more data to read from socket
at java.lang.Throwable.<init>(Compiled Code)
at java.lang.Exception.<init>(Compiled Code)
at java.sql.SQLException.<init>(Compiled Code)
at oracle.jdbc.dbaccess.DBError.check_error(Compiled Code)
at oracle.jdbc.ttc7.TTCInBuffer.getByte(Compiled Code)
at oracle.jdbc.ttc7.TTIMsg.unmarshalSB1(Compiled Code)
at oracle.jdbc.ttc7.Oall7.receive(Compiled Code)
at oracle.jdbc.ttc7.TTC7Protocol.doOall7(Compiled Code)
at oracle.jdbc.ttc7.TTC7Protocol.parseExecuteFetch(Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecuteOther(Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecuteWithBatch(Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecute(Compiled Code)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(Compiled Code)
at oracle.jdbc.driver.OracleStatement.executeUpdate(Compiled Code)
The same application works fine on Win NT4 (JDBC) with ORACLE 7.3.3.0.0
Can anybody solve this problem? Any ideas?
null

Reason: the ORACLE server process crashes (sometimes), and the result is the "empty"
socket.

Sql developer error -No more data to read from socket

Hi
I have installed SQL Developer 10.5.5 on my mac os x.5
and oracle data base is 10.2
when i am making a new connection from sql developer i am getting this error
NO MORE DATA TO READ FROM SCOKET
I tried searching blogs but no luck yet.
can any one help me....
Thanks a lot!

That's typically an error on the database side. When I see it it I know the database is down and once I bring it up, then all is good again. Once the database is up and running, you then start SQL Developer and create a new connection? What type of connection are you creating?
Sue

SQL Exception "No more data to read from socket"

I am running an application that uses a servlet which accesses oracle database 7.3 thru jdbc thin driver 7.3.4.
It executes some queries and at some or the other point of time while exceuting a query it gives the exception " No more data to read from socket" .
What is the problem and how should I solve it?

I am running an application that uses a servlet which accesses oracle database 7.3 thru jdbc thin driver 7.3.4.
It executes some queries and at some or the other point of time while exceuting a query it gives the exception " No more data to read from socket" .
What is the problem and how should I solve it?

OIM DB error:: No more data to read from socket vendor code 17410

hello experts,
I am getting this error while connecting db with sql developer, and in OIM server logs am getting unable to establish connection with database.
Kindly suggest what to do.
Regards,
KK

enable gateway tracing by setting HS_FDS_TRCE_LEVEL=255 in your DG4MSQL configuration file. Then open a new SQL*Plus window and execute:
select user from dual@<dg4msql db link>;
A trace file is generated in the ORACLE_HOME/dg4msql/trace directory. Post its content.

ERROR: No more data to read from socket

I can't seem to connect via JDBC to an 8.1.5 server on Linux
from an NT machine. I can connect via SQL+ no problem.
Any answers?
Here's my configuration:
Oracle 8i (8.1.5) server running on RH6.0
Oracle 8i (8.1.5) client running on NT4.0
The entry in the TNSNAMES.ORA file is:
MAV_DEV.MAVONLINE.COM =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(PORT = 1521)(HOST = blastoff))
(CONNECT_DATA =
(SID = TEST)
The Java call is:
conn = DriverManager.getConnection
("jdbc:oracle:thin:@blastoff:1521:TEST",
"testid", "changme");
ppk
[email protected]
null

Try this syntax:
DriverManager.getConnection("jdbc:oracle:thin:testid/changeme@blastoff:1521:TEST");
Guy
Pravin Kumar (guest) wrote:
: I can't seem to connect via JDBC to an 8.1.5 server on Linux
: from an NT machine. I can connect via SQL+ no problem.
: Any answers?
: Here's my configuration:
: Oracle 8i (8.1.5) server running on RH6.0
: Oracle 8i (8.1.5) client running on NT4.0
: The entry in the TNSNAMES.ORA file is:
: MAV_DEV.MAVONLINE.COM =
: (DESCRIPTION =
: (ADDRESS_LIST =
: (ADDRESS = (PROTOCOL = TCP)(PORT = 1521)(HOST =
blastoff))
: (CONNECT_DATA =
: (SID = TEST)
: The Java call is:
: conn = DriverManager.getConnection
: ("jdbc:oracle:thin:@blastoff:1521:TEST",
: "testid", "changme");
: ppk
: [email protected]
null

No more data to read from socket error.

Oracle Version
SQL> select * from v$version;
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
PL/SQL Release 11.2.0.2.0 - Production
CORE 11.2.0.2.0 Production
TNS for Linux: Version 11.2.0.2.0 - Production
NLSRTL Version 11.2.0.2.0 - ProductionI am trying a code like below
MERGE INTO TABLE1
( SELECT ...
FROM VIEW1 ) a UNPIVOT ("VALS" FOR cols IN ( .....columns to unpivot.......))
where a.column1='test'
) b ON ( a.id=b.id)
WHEN MATCHED THEN
UPDATE set a.name=b.name
when not matched then
insert (a.id,a.name) values ( b.id,b.name);This code is giving error : No more data to read from socket error.
But when I am trying
MERGE INTO TABLE1
( SELECT ...
FROM VIEW1*
where a.column1='test' ) a UNPIVOT ("VALS" FOR cols IN ( .....columns to unpivot.......))
) b ON ( a.id=b.id)
WHEN MATCHED THEN
UPDATE set a.name=b.name
when not matched then
insert (a.id,a.name) values ( b.id,b.name);It's working properly.
Any idea why I am getting error with code 1?
Edited by: Anupam_Halder on Oct 4, 2012 2:13 PM

You need to look for an Oracle specific error code and message. The error text you have posted does not seem to be an Oracle error.
The error however could result from an ORA-3113 end-of-file on communication channel.
This Oracle error means that the Oracle server process servicing your request (executing SQL or PL/SQL code) ran into a fatal error (potentially an Oracle bug). The server process then proceeds with a "crash dump" - writes an error to the database instance's alert log, writes a trace file and then terminiates abnormally.
It terminates without telling the client and without tearing down the tcp client-server connection. When the client then attempts to use this connection, the socket read fails. No data to read as the socket connection no longer exists.
But this is speculation - we need to see the actual Oracle error (from the server or from the client driver). And you seem to be using an Oracle client that suppresses Oracle error codes and text. Which places a serious question mark over the actual usability of such client s/w for Oracle client-server.

'No more data to read from socket' error connecting to Oracle 9i

Hi,
My Java app connecting to Oracle 9i gets an error: No more data to read from socket.
Application host is running oraClient805 and JDK1.3.1_06 SE
Connection string jdbc:oracle:thin:@myhost:1521:mysid worked fine connecting to the Oracle 8 version.
I've checked tnsnames.ora, tried tnsping util to Ora 9i, it's OK. As well I could connect directly through the SQL Worksheet.
Could anyone suggest what could be wrong or different to make a connection from Java app to Oracle 9i ?
I was advised to upgrade the driver, but I am not sure what do I need. I have classes102, classes111, and classes12 in the %ORACLE_HOME%\jdbc\lib\ directory. Do I miss something?
Thanks a lot.
Tatiana

I believe there might be problems using the older drivers with oracle 9. You might search this forum for more info.

SQL Error: No more data to read from socket

Similar Messages

Maybe you are looking for