Sql for system privileges

What is the sql command to view all the system privileges that are available. Thanks have been searching on the web with no luck.
found it system_privilege_map
Message was edited by:
user457357

And just to show the difference between what the OP found and what Virag suggested:
Connected to:
Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
SQL> select name from system_privilege_map
2 minus
3 select privilege from dba_sys_privs;
NAME
EXEMPT ACCESS POLICY
EXEMPT IDENTITY POLICY
SYSDBA
SYSOPER

Similar Messages

*Listing admin_option for System Privilege *

Hi All,
I have a use case where in i have to list the admin_option for all the system privileges.
Apart from two privileges listed below i could find this info from dba_sys_priv and dba_wm_sys_priv views.
SYSDBA
SYSOPER
We can find these privileges information from v$pwfile view which do not give any information abt admin_option.
Is there any way we can find out this inforamtion?
I executed following steps :
=================================
SQL> conn user2/password
Connected.
SQL>select user from dual;
USER
USER2
SQL> conn user2/password as sysdba
Connected.
SQL> select user from dual;
USER
SYS
SQL> conn user2/password
Connected.
SQL> grant sysdba to user1;
grant sysdba to user1
ERROR at line 1:
ORA-01031: insufficient privileges
SQL> conn user2/password as sysdba
Connected.
SQL> run
1* grant sysdba to user1
Grant succeeded.
======================================
Here when 'user2' is connecting as sysdba, its becoming 'sys' and its 'sys' who is granting sysdba privilege to 'user1'.
So from this, can we say that its always 'sys' who can grant the sysdba privilege and admin_option for sys is always 'YES' where as for other users its always 'NO'
Is this same for 'sysoper' privilege, because initially, its only 'sys' who has both the privileges assigned?
If above is not true, is there any way to find this information?
I am in URGENT need of this information. Could anybody please help me on this?

Just a correction...
From Oracle management Console, we can not change the admin_option assigned by default.
Even if we try to change, the following sql gets executed
REVOKE SYSDBA FROM USER2
GRANT SYSDBA TO USER2
So its ultimately With admin option always :)
That has solved my problem
Thanks all for your help..
--Mrunal

System.privilege.admin problem

Good afternoon. Please excuse if this has already been asked and answered, but after searching for a few days I still haven't found a fix for this:
After I had to wipe the hard drive on my G5 (don't ask), I reinstalled the OS from the DVD and then used the setup assistant to migrate all my files from my (mirrored) MacBook Pro. Now the application that runs my wireless broadband modem starts up, recognizes the modem, which is getting reception and shows up on Sprint's network (their tech support confirms), but *asks for my admin password, noting that it's necessary for "system.privilege.admin"* I give the (confirmed) password. At that point I get the spinning beach ball for a few seconds, then nothing at all happens. It doesn't freeze, mind you. It just goes back to idle. The same modem works fine with the same software on my laptop.
*How do I fix my "system.privilege.admin"?*
I had to reauthorize my Adobe Creative Suite, too, incidentally, but that took immediately.
Here's what I've already tried:
--Repair permissions
--Un- and reinstall the software
--delete plists associated with Sprint's SmartView software
--create a new user account with admin privileges (beyond my main account that has admin privileges, too, of course)
--confirmed firewall settings as "allow all incoming connections"
None of these had any effect on the problem.
Thank you for your time. I hope you can help.

Ah! Very interesting! I hadn't thought to circumvent the provided application entirely. -- Well, look at that! That did the trick! Thank you, Sig.
Here is the configuration for future reference:
Configuration: Default
Telephone Number: #777
Account name: (field left blank)
Password: (field left blank)
Advanced > Modem Tab:
Vendor: Other
Model: EVDO Support
Enable error correction and compression in modem (checked)
Dial Mode: Ignore dial tone when dialing
Dialing: Tone
Sound: Off
The rest of the settings I left alone.
I'm still curious how to address the system.privilege.admin issue, but my actual problem is solved. Thank you for your help! I appreciate it.

Event tasks in SYSTEM Privilege ?

Hello Experts,
SAP IDM 7.2 SP8.
I have query on event task being defined on SYSTEM PRIVILEGE (PRIV:SYSTEM:<REPO_NAME>).
I believe IDM should not trigger provisioning tasks(ex. HOOK TASK 4) due to removal or addition of SYSTEM privilege.
Only removal/addition of ACCOUNT PRIVILEGE (PRIV:<REPO_NAME>:ONLY) should
trigger of provisioning tasks which also remove/add of system privilege for the user as defined in provisioning framework.
So, How Event tasks should be defined for system privileges ?
I think it should be empty (NONE).
Below screenshots shows the current configuration being done for system privileges in my client's IDM system.
This results in trigger of HOOK TASK 4 when SYSTEM privilege is removed/added from the user which causes errors which I know happen because of defining event tasks on SYSTEM PRIVILEGES.
Your help is appreciated.
Thanks & Regards,
Pradeep

Hi Steffi,
Thank you very much.
I just compared Task defined at Repo level and privilege level and could relate then.
Add Task (Assignment at Repo level, screenshot 1) = Add Task (Assignment at Privilege level, screenshot 3)
Remove Task (Assignment at Repo level, screenshot 1) = Remove Task (Deassignment at Privilege level, screenshot 3)
Provisioning task (Privilege tasks at Repo level, screenshot 1) = Provisioning task (Privilege tasks at Privilege level, screenshot 2)
Deprovisioning task (Privilege tasks at Repo level, screenshot 1) = Deprovisioning task (Privilege tasks at Privilege level, screenshot 2)
So I need to set Add Task (Assignment at Privilege level, screenshot 3) and Remove Task (Deassignment at Privilege level, screenshot 3) to NONE .
In your case, this is the setting done and so provisioning does not trigger due to addition/removal SYSTEM privilege which is correct.
I would do this change in Dev system and test it .
I will update the thread with result.
Event task defined at repo level.
Screenshot 1:
Task defined at privilege level (tab Tasks)
Screenshot 2:
Event task defined at privilege level.
Screenshot 3:
Thanks & Regards,
Pradeep

Create a new user for oracle 10G ASM instance with sysdba system privilege

Hi,
In our Golden Gate Project, we require the SYS user credential to connect to the Oracle 10g ASM instance to read the database transaction logs.But our client is not providing the SYS user credential to connnect to ASM instance.
I'm getting the error message "ORA-01109: database not open",When I tried to create a new user using the below the steps in oracle 10g ASM instance
1. Login using "sqlplus / as sysdba"
2. Create user <username> identified by <password>;
But in oracle 11g ASM instance, I'm able to create new user by connecting the ASM instance with SYSASM role without issues.
Is there is any workaround to create a new user with sysdba system privilege in oracle 10g ASM instance?.
Thanks in advance .

Hi,
Recreate the password file for the ASM instance as follows:
Unix:
orapwd file=<ORACLE_HOME>/dbs/PWD<SID> password=<sys_password>
Windows:
orapwd file=<ORACLE_HOME>/database/PWD<SID>.ora password=<sys_password>
Now sys password is reset, we are ready to use sys for ASM management. I decided to create another user ASMDBA as I tried above.
SQL> create user ASMDBA identified by test01;
User created.
SQL> grant SYSASM, SYSOPER to ASMDBA;
Grant succeeded.
SQL> select * from v$pwfile_users;
USERNAME SYSDBA SYSOPE SYSASM
SYS TRUE TRUE TRUE
ASMDBA FALSE TRUE TRUE
Please see this link : http://orachat.com/how-to-change-asm-sys-password-creating-sysasm-user-11g/
Thank you

VLD-2771 System privileges may not allow extraction from source ....??

When I try to deploy the mappings in OWB Deployment Manager, I got a Warning "VLD-2771 System privileges may not allow extraction from source ORDER_ITEMS". WHY? ^^""
========================================
I define a Runtime Repository Connections "ORACLE_HW_RUNTIME"
Host Name: localhost
Port Number: 1521
Service Name: GBGLM
Connect As User: owb904rr
Runtime Repository Owner: owb904rr
and the "ORACLE_HW_RUNTIME" is in "ORACLE_WAREHOUSE" module, the "ORACLE_WAREHOUSE" use the link "OE" and the owner is "OWBUSER"
p.s. the table "ORDER_ITEMS" is in "OE" schema. I had grant DBA to "owb904rr" and "OWBUSER".
then use "ORACLE_HW_RUNTIME" to deploy the Mappings "WH_ORDERS_MAP". What I need to do for deploy?
^_^||

Anyone with similar experience using SQL Server as the source?
First I get: VLD-2771: System privileges may not allow extraction from source Product.
Then if i ignore the warning and deploy, i get
ORA-06550: line 15, column 18:
PL/SQL: ORA-00942: table or view does not exist
I have a public database link to the sql server database.
When I create the mapping, I am able to see the tables and create the map. So why this problem when deploying. Which user is to be granted access to the source tables. I belive we cannot grant access to remote database tables using a database link. So what is the work around?
Any help is highly appreciated.
Please email me at [email protected]

HANA DB User for ABAP/ Privileges on Users- Attach Debugger

Hi SAP HANA/ ABAP experts,
I was trying to create an ABAP on HANA role for on HANA DB.
role TestRoles::developer_role
extends catalog role "ABAP_DEV", "ABAP_ADMIN"
catalog sql object "_SYS_REPO"."GRANT_SCHEMA_PRIVILEGE_ON_ACTIVATED_CONTENT","_SYS_REPO"."GRANT_PRIVILEGE_ON_ACTIVATED_CONTENT": EXECUTE;
catalog schema "SAPSND": SELECT, DEBUG;
system privilege: CATALOG READ;
I also would like to get the next in place: (for External Debugging AMDP on HANA). Does anyone know how to geht this into a role
grant attachdebuggerto DEBUGUSER;
Please refer to next OSS for more details: 1942471 - New Debug Privileges for SQLScript Debugger.
Thanks in advance.
Best Regards,
Bart

As of HANA SP9 the next is not required anymore for AMDP debugging.
Anyway before SP9 it could be solved by logging on with ECC user (mostly SAP<SYSID>, but could also be named differntly), then create a new role with the ATTACH DEBUGGER (Tab Privileges on Users). And then include in repository role, refer to next example ROLE XYZ
extends catalog role "ABAP_DEV", "ABAP_ADMIN", "ROLE XYZ"

SQL Workshop insufficient privileges error :-S

Hi everyone,
The problem I have is when I try to compile a procedure, function or whatever I get the ORA-01031: insufficient privileges error.
I tryed to give the DBA role to the APEX_PUBLIC_USER without success.
I tryed to grant the "execute" (on an especified procedure or function for testing purposes) privileges to that user and I still getting the error. :-S
I can compile any object from the SQL Navigator but APEX.
What am I missing?
Hope u could help me :)
Thanks in advance,
Fury Morales.

You should not be messing around with the grants made to the APEX product accounts (FLOWS_xxx etc).
Scott's suggestion is to have your workspace parsing schema be granted the 'create procedure' privilege.
From sqlworkshop you can the run query below to determine the 'system' privileges granted to the workspace schema
select privilege from user_sys_privs;
Varad
Edited by: varad acharya on Jul 28, 2009 4:32 PM

DEBUG CONNECT SESSION system privilege

Hi everyone. It's my first post to this forum so I'd like to say hello :)
I'm completely new to PL/SQL language. I'm using PL/SQL Developer and I want to make a simple testscript but when I launch it communicate appears
Debugging requires the DEBUG CONNECT SESSION system privilege
could You tell me how to set that? Greetings. P.

in the xp:
start>run>cmd
in the cmd console:
1. set oracle_sid=<bobens_83-here_goes_your_db-name>
2. sqlplus /nolog
3. conn sys as sysdba
4. sqlplus may asks for password - if it does, bobens_83, supply the password that was chossen during the install process.
5. grant DEBUG CONNECT SESSION to =<bobens_83-here_goes_your_db-username>
6. exit sqlplus
7. exit cmd
in the xp:
try to debug using PL/SQL Developer.
Have fun,
Amiel Davis

The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. InnerException: Requested registry access is not allowed.

I have read some of the other posts for people that got this error, but none seem to apply to me.
My program has been working for weeks. I made some minor changes, and started getting the error (full details below).
I did a TFS "undo pending changes" and still getting the same error, even after logging off. The one odd thing is that I did change my Windows password this week. The connection string is using a SQL user id and password that has no issues.
I'm an Admin own my own box (running WIn XP SP3). I even tried "Run as Admin" on Visual Studio.
I'm doing a Debug-Start, running a Console-Test-Program that calls a WCF service, which on local machine is hosted by "ASP.NET Development Server".
We have two other developers, one has the same problem, one does not. In theory, we have all done "get latest" and are running the same code.
The SQL Connection is related to a trace database; we are using this library http://ukadcdiagnostics.codeplex.com which has worked fine for months.
When I do "Start Run" in Visual Studio, I get this error:
{"The type initializer for 'System.Data.SqlClient.SqlConnection' threw an exception. "}
with InnerException: {"The type initializer for 'System.Data.SqlClient.SqlConnectionFactory' threw an exception."}
and it has InnerException: {"Requested registry access is not allowed. "}
Outmost StackTrace:
   at System.Data.SqlClient.SqlConnection..ctor()
   at System.Data.SqlClient.SqlConnection..ctor(String connectionString)
   at FRB.Diagnostics.Listeners.SqlDataAccessCommand..ctor(String connectionString, String commandText, CommandType commandType)
   at FRB.Diagnostics.Listeners.SqlDataAccessAdapter.CreateCommand()
   at FRB.Diagnostics.Listeners.SqlTraceListener.TraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.FilterTraceEventCore(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String message)
   at FRB.Diagnostics.Listeners.CustomTraceListener.TraceEvent(TraceEventCache eventCache, String source, TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceEvent(TraceEventType eventType, Int32 id, String format, Object[] args)
   at System.Diagnostics.TraceSource.TraceInformation(String message)
   at FRB.EC.AdminService.AdminService.TestHelloWorldWithTrace(String name)
   at SyncInvokeTestHelloWorldWithTrace(Object , Object[] , Object[] )
   at System.ServiceModel.Dispatcher.SyncMethodInvoker.Invoke(Object instance, Object[] inputs, Object[]& outputs)
   at System.ServiceModel.Dispatcher.DispatchOperationRuntime.InvokeBegin(MessageRpc& rpc)
Second Inner StackTrace:
   at System.Data.SqlClient.SqlConnection..cctor()
Third Inner StackTrace:
      at System.Data.SqlClient.SqlConnectionFactory..cctor()
When I do "Run as Admin", I get this error:
{"Could not load file or assembly 'FRB.EFDataAccess, Version=1.0.0.0, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied. "}
Server stack trace:
   at System.ServiceModel.Channels.ServiceChannel.ThrowIfFaultUnderstood(Message reply, MessageFault fault, String action, MessageVersion version, FaultConverter faultConverter)
   at System.ServiceModel.Channels.ServiceChannel.HandleReply(ProxyOperationRuntime operation, ProxyRpc& rpc)
   at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
   at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
   at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
   at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
   at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
   at FRB.EC.AdminService.ConsoleTester.svcRef.IAdminService.GetDispositionStatusTypeList()
   at FRB.EC.AdminService.ConsoleTester.svcRef.AdminServiceClient.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\Service References\svcRef\Reference.cs:line 2459
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.GetDispositionStatusTypeList() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 565
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.ExecuteNewRelease103QueryMethods() in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 189
   at FRB.EC.AdminService.ConsoleTester.ConsoleProgram.Main(String[] args) in C:\SourceEagleConnect\EagleConnect\Dev\WCFServices\FRB.EC.AdminService.ConsoleTester\ConsoleProgram.cs:line 76
   at System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
   at System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
   at Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
   at System.Threading.ThreadHelper.ThreadStart_Context(Object state)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Threading.ThreadHelper.ThreadStart()
I am also posting the web.config/app.config, but I would rather not focus on that since there were absolutely no changes to it between the time it was working and the time it began failing.
Client app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<connectionStrings>
</connectionStrings>
<system.serviceModel>
    <behaviors>
      <serviceBehaviors>
        <behavior name="ServiceBehavior">
          <serviceMetadata httpGetEnabled="true"/>
          <serviceDebug includeExceptionDetailInFaults="false"/>
          <serviceAuthorization impersonateCallerForAllOperations="true"/>
        </behavior>
      </serviceBehaviors>
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
    </behaviors>
    <bindings>
      <wsHttpBinding>
        <binding name="WSHttpBinding_IAdminService" closeTimeout="00:01:00"
          openTimeout="00:01:00" receiveTimeout="00:10:00" sendTimeout="00:01:00"
          bypassProxyOnLocal="false" transactionFlow="false" hostNameComparisonMode="StrongWildcard"
          maxBufferPoolSize="524288" maxReceivedMessageSize="5565536"
          messageEncoding="Text" textEncoding="utf-8" useDefaultWebProxy="true"
          allowCookies="false">
          <readerQuotas maxDepth="32" maxStringContentLength="8192" maxArrayLength="16384"
            maxBytesPerRead="4096" maxNameTableCharCount="16384" />
          <reliableSession ordered="true" inactivityTimeout="00:10:00"
            enabled="false" />
          <security mode="Message">
            <transport clientCredentialType="Windows" proxyCredentialType="None"
              realm="" />
            <message clientCredentialType="Windows" negotiateServiceCredential="true"
              algorithmSuite="Default" />
          </security>
        </binding>
      </wsHttpBinding>
    </bindings>
        <client>
              <endpoint address="http://localhost:3588/AdminService.svc" binding="wsHttpBinding"
                    bindingConfiguration="WSHttpBinding_IAdminService" contract="svcRef.IAdminService"
                    name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
    </system.serviceModel>
</configuration>
web.config of WCF service:
<?xml version="1.0"?>
<configuration>
    <configSections>
    <section name="FRB.Diagnostics" type="FRB.Diagnostics.Configuration.UkadcDiagnosticsSection, FRB.Diagnostics"/>
</configSections>
    <appSettings>
       
    </appSettings>
    
<connectionStrings>
    <add name="log" connectionString="Data Source=myserver;Initial Catalog=ECWCFLOG_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="DBConn" connectionString="Data Source=myserver;Initial Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True" providerName="System.Data.SqlClient"/>
    <add name="EagleConnectEntities" connectionString="metadata=res://*/EagleConnect.csdl|res://*/EagleConnect.ssdl|res://*/EagleConnect.msl;provider=System.Data.SqlClient;provider connection string="Data Source=myserver;Initial
Catalog=ECData_SharedDev;User ID=myuser;Password=mypass;MultipleActiveResultSets=True"" providerName="System.Data.EntityClient"/>
</connectionStrings>
    
    <FRB.Diagnostics>
        <sqlTraceListeners>
            <sqlTraceListener name="sqlTraceListenerSettings"
                        connectionStringName="log"
                        commandText="INSERT INTO LogStore VALUES(@Source, @ActivityId, @ProcessId, @ThreadId, @EventType, @Message, @Timestamp)"
                        commandType="Text">
                <parameters>
                    <parameter name="@Source" propertyToken="{Source}"/>
                    <parameter name="@ActivityId" propertyToken="{ActivityId}"/>
                    <parameter name="@ProcessId" propertyToken="{ProcessId}"/>
                    <parameter name="@ThreadId" propertyToken="{ThreadId}"/>
                    <parameter name="@EventType" propertyToken="{EventType}" callToString="true"/>
                    <parameter name="@Message" propertyToken="{Message}"/>
                    <parameter name="@Timestamp" propertyToken="{DateTime}"/>
          
        </parameters>
            </sqlTraceListener>
        </sqlTraceListeners>
        <smtpTraceListeners>
            <smtpTraceListener name="smtpTraceListenerSettings"
                         host="vssmtp"
                         port="25"
                         from="[email protected]"
                         to="[email protected]"
                         subject="AdminService Logging Event: {EventType}, {MachineName}"
                         body="{Message}
=======
Process={ProcessId},
Thread={ThreadId},
ActivityId={ActivityId}"/>
        </smtpTraceListeners>
    </FRB.Diagnostics>
    
    <system.diagnostics>
        <sources>
            <source name="FRB.EC.AdminService" switchValue="All">
                <listeners>
                    <clear/>
                    <add name="ods"/>
                    <add name="smtp"/>
                    <add name="sql"/>
                </listeners>
            </source>
            <source name="System.ServiceModel" switchValue="Off" propagateActivity="true">
                <listeners>
                    <add name="ignored" type="System.Diagnostics.ConsoleTraceListener"/>
                </listeners>
            </source>
        </sources>
        <sharedListeners>
            
            <add name="ods"
           type="FRB.Diagnostics.Listeners.OutputDebugStringTraceListener, FRB.Diagnostics"
           initializeData="{ActivityId}|{EventType}: {Message} - {DateTime}, Process={ProcessId}, Thread={ThreadId}"/>
            
            <add name="sql"
           type="FRB.Diagnostics.Listeners.SqlTraceListener, FRB.Diagnostics"
           initializeData="sqlTraceListenerSettings"
           traceOutputOptions="Timestamp"/>
            
            <add name="smtp"
           type="FRB.Diagnostics.Listeners.SmtpTraceListener, FRB.Diagnostics"
           initializeData="smtpTraceListenerSettings">
                   <filter type="System.Diagnostics.EventTypeFilter"
                   initializeData="Error"/>
            </add>
        </sharedListeners>
        <trace autoflush="true"/>
    </system.diagnostics>
    <system.web>
    <compilation debug="true" targetFramework="4.0">
    </compilation>
        <roleManager enabled="true" defaultProvider="AspNetWindowsTokenRoleProvider"/>
    </system.web>
    <system.serviceModel>
        <services>
            <service name="FRB.EC.AdminService.AdminService"
               behaviorConfiguration="FRB.EC.AdminService.AdminServiceBehavior">
                
                <endpoint address="" binding="wsHttpBinding"
                  bindingConfiguration="wsHttpEndpointBinding"
                  contract="FRB.EC.AdminService.IAdminService">
                    
                    <identity>
                        <dns value="localhost"/>
                    </identity>
                </endpoint>
                <endpoint address="mex" binding="mexHttpBinding" contract="IMetadataExchange"/>
            </service>
        </services>
        <bindings>
            <wsHttpBinding>
                <binding name="wsHttpEndpointBinding"
                 maxBufferPoolSize="2147483647"
                 maxReceivedMessageSize="500000000">
                    <readerQuotas maxDepth="2147483647"
                        maxStringContentLength="2147483647"
                        maxArrayLength="2147483647"
                        maxBytesPerRead="2147483647"
                        maxNameTableCharCount="2147483647"/>
                    <security>
                        <message clientCredentialType="Windows"/>
                    </security>
                </binding>
            </wsHttpBinding>
        </bindings>
        <behaviors>
            <serviceBehaviors>
                <behavior name="FRB.EC.AdminService.AdminServiceBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="true"/>
                    <serviceCredentials>
                    </serviceCredentials>
                    
                    <serviceAuthorization principalPermissionMode="UseWindowsGroups"
                                impersonateCallerForAllOperations="true"/>
                </behavior>
                <behavior name="FRB.EC.AdminService.IAdminServiceTransportBehavior">
                    
                    <serviceMetadata httpGetEnabled="true"/>
                    
                    <serviceDebug includeExceptionDetailInFaults="false"/>
                    <serviceCredentials>
                        <clientCertificate>
                            <authentication certificateValidationMode="PeerTrust"/>
                            
                        </clientCertificate>
                        <serviceCertificate findValue="WCfServer"
                                storeLocation="LocalMachine"
                                storeName="My" x509FindType="FindBySubjectName"/>
                    </serviceCredentials>
                </behavior>
            </serviceBehaviors>
        </behaviors>
        <serviceHostingEnvironment multipleSiteBindingsEnabled="true"/>
    </system.serviceModel>
    <system.webServer>
        <modules runAllManagedModulesForAllRequests="true"/>
    </system.webServer>
</configuration>
Thanks for any help.
Neal

I think I found it... this is sure a strange error for what is really happening.
Apparently it had happened to me before, and fortuantely, I actually added the following comment:
            // Above is related to the WCFLOG SQL Diagnostics Trace
            // If you get error here an inner exception "requested registry access is not allowed"
            // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
            // then make sure you have impersonation enabled in your client.
            // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
Now I think I will do a try catch and spit out the same text.
Still testing to assure that this really was the issue.
      <endpointBehaviors>
        <behavior name="FRB.AllowImpersonate ">
          <clientCredentials>
            <windows allowedImpersonationLevel="Impersonation"/>
          </clientCredentials>
        </behavior>
      </endpointBehaviors>
The line below in BOLD below is what somehow seemed to disappear from my app.config - probably due to a TFS human error - still checking that also:
        <client>
              <endpoint address="http://localhost:4998/AdminService.svc"
                              behaviorConfiguration="FRB.AllowImpersonate"
                              binding="wsHttpBinding"
                          bindingConfiguration="WSHttpBinding_IAdminService"
                             contract="svcRef.IAdminService"
                        name="WSHttpBinding_IAdminService">
                    <identity>
                          <dns value="localhost" />
                    </identity>
              </endpoint>
        </client>
Here's how I "idiot-proofed" this error for now, to give an error that actually at least points to a solution:
        public SqlDataAccessCommand(string connectionString, string commandText, CommandType commandType)
            try
                _connection = new SqlConnection(connectionString);
                // Above is related to the WCFLOG SQL Diagnostics Trace
                // If you get error here an inner exception "requested registry access is not allowed"
                // inside exception "type initializer for System.Data.SqlClient.SqlConnection"
                // then make sure you have impersonation enabled in your client.
                // See AdminConsole web.config or FRB.EC.AdminService.ConsoleTester.app.config for examples
            catch (Exception ex)
                if (ex.ToString().Contains("The type initializer for"))
                throw new System.ApplicationException(@"
                Your client app <endpoint> must be cofigured have a
              'behaviorConfiguration' attribute like this:
                behaviorConfiguration='FRB.AllowImpersonate'
               that points back to a behavior that has this syntax:
          <behavior name='FRB.AllowImpersonate'>
             <clientCredentials>
                 <windows allowedImpersonationLevel='Impersonation'/>
             </clientCredentials>
          </behavior>
          ", ex);
               else
                    throw ex;
            _command = _connection.CreateCommand();
            _command.CommandText = commandText;
            _command.CommandType = commandType;
            // TODO _command.CommandTimeout = ;
Neal

Configuration issue on two items for system center 2012 config manager

My first issue was at the beginning of the install trying to extend the AD schema for system center 2012 config manager version 7.5.1561.0. The
path is missing for SMSSetup\Bin\x64\ to execute
Extadsch.exe is not on my disc. There is only a x86 and 64 bit folder with no bin.
Second issue when creating configuration manager connector. Error connecting to the database. So i went to my sqlserver and checked the permissions on the account I did notice that there are no smsdbrole_extract role permissions. Did I miss a step somewhere
along the way? On a side not that this is an instance and not under the default place. Also, i am using sql 2008 R2 version.

OK, nothing wrong with that per se, but it has nothing to do with ConfigMgr. Also, ConfigMgr is not a "module", it's a distinct product unto itself with its own unique requirements and dependencies that is also architecturally completely different. So,
there's nothing to uninstall to install ConfigMgr. Also, I hope you're not trying to install these products on the same server. That is OK for a small lab environment, but nothing more. Even then, I wouldn't do it since its never something you'd do in production.
As mentioned, each product has its own unique dependencies with no true overlap.
Jason | http://blog.configmgrftw.com

No service for system YYYYY client ZZZ in Integration Directory

We recently applied SP12 to our XI 3 on SR1. When we try to send an IDoc from SAP R/3 system to SQL database (IDoc and JDBC Adapters) we are getting error messag in SM58 (R/3 System) as "No service for system SAPIDS, client 800 in Integration Directiry". SAPIDS is the port created using IDX1 and 800 is the R/3 IDES client. RFC communications etc work good. We do not se any difference in the set up of Integration Repository as well as Integration Directory.
Please advise.
Thanks,
Bhaskar

Hi Bhaskar
As the error message says, the service is not available. In your Integration directory, first clear the SLD cache, by choosing from the menu Environment --> Clear SLD Data. Then open your scenario and see if you any Business System assigned to it, you check that by going to,
your scenario --> service without party --> business system, and if there are no business system existing, you have to assign a business system.
Also have a look at the following thread,
No service for system ... in Integration Directory
cheers
Sameer

Curriculum Developer for Systems - ORACLE

Curriculum Developer for Systems Products – Direct Hire with Oracle - IRC1818445 – Santa Clara, CA
The Systems Hardware Curriculum Development team is part of the Systems Product Development organization and is responsible for developing training for the SPARC, X86, Storage, Tape, Networking, Engineered Systems and Optimized Solutions. We plan, design, and develop high-quality and timely technical training materials. We work with Oracle lines of business to deliver those materials effectively so that customers, partners, and Oracle personnel have the skills, knowledge and ability to be effective in their jobs and best utilize Oracle's systems products.
The Systems Hardware Curriculum Development team is part of the Systems Product Development organization and is responsible for developing training for the SPARC, X86, Storage, Tape, Networking, Engineered Systems, and Optimized Solutions.
We plan, design, and develop high-quality and timely technical training materials including Instructor Led, Web-based and informal e-learning. We work with Oracle lines of business to deliver those materials effectively so that customers, partners, and Oracle personnel can deploy and use Server Technologies products rapidly and successfully.
This is an excellent opportunity to put your adult learning education and experience into action for developing courseware, and learning enterprise computer technologies. In this job role as a Curriculum Developer, you are responsible for developing courses (Instructor Led, Live Virtual, Web Based, Informal e-learning) on existing and new Systems Hardware products. You will be interacting with technical experts from several Lines of Business (LoBs) such as Engineering, Product Management, Services and Oracle University. You may work either individually or with multiple team members on your projects with an opportunity to lead some projects.
Educational Background:
• You must possess at least a Bachelor's Degree in e-learning, instructional design, Computer Science or related technology with certification or working experience on Instructional Design.
• Understanding and ability to use the most current e-learning and course development tools
• Project management skills a plus
Hands-on and Technical Experience:
• 2-4 years experience as Curriculum Developer or Trainer and some knowledge of computer hardware, software and operating systems
• Experience with creating training lab environments, installing and configuring hardware and software independently is required.
Technical communication and soft skills:
• Excellent written and verbal communication skills for global audience
• Strong inter-personnel communication skills to be able to make great business relationships with people from various areas of the business
• Strong ability to graphically illustrate complex concepts
• Demonstrate a keen sense of organization and attention to detail
• Ability to handle unforeseen difficulties and obstacles with ease
• An excellent team player, able to work on complex projects with a group of other curriculum developers
• Ability to work on tight deadlines and on multiple projects at a short notice
• Ability to work with people in different time zones
• Ability to understand business needs and meet deadlines
• Flexibility, creativity and an eagerness to learn are highly valued for this position
Top 3 skill sets / technologies in the ideal candidate:
1. E-learning development tools and experience, including social media in learning, HTML, Flash, Articulate, Captivate, Camtasia, Webex Training
2. Adult Learning / Training
3. Understanding of Enterprise computer hardware and software
This is a notification that Oracle performs background checks on all candidates at the time of offer.
Verification includes dates of employment, educational degree, and criminal record.
Any incorrect data provided may result in making you ineligible for employment at Oracle.
Please ensure in advance that all information listed on your resume is accurate.
If you are interested in this opportunity please send me your updated resume as it pertains to the position directly to [email protected] with the subject line "Curriculum Developer for Systems Products – IRC1818445 – Santa Clara, CA" for immediate consideration.
No agencies please.
Thank you,
Eric

So, I'm having the same issue, but it's like I'm chasing down a port. The first time I got these error messages
Connecting to the database DEV.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '555.12.18.288', '5950' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database DEV.Our network staff found a bunch of other denials in the firewall logs
/5185
/5200
/5236
/5815
/5950 Now that they've those allowed, I tried to start debug again, and this time I got
Connecting to the database DEV.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP('555.12.18.288', '6266' )
ORA-30683: failure establishing connection to debugger
ORA-12535: TNS:operation timed out
ORA-06512: at "SYS.DBMS_DEBUG_JDWP", line 68
ORA-06512: at line 1
Process exited.
Disconnecting from the database DEV.What gives? Do I just keep trying until I get all of the ports allowed?
Thanks,
---=Chuck

System privileges do not enable extraction from source

Hi
I'm new to OWB, Also for this I granted select on source to target.
I'm using OWB10g/Oracle on Windows xp on same m/c(Local Host), I created mapping source tables emp/dept (look up on dept) and taget to dept_emp.
When I valaidate gives validation compled successfully, When I go to deployment manager, It gives System privileges (I granted select privilges using SQLPLUS), When I tried to deploy it gives another error Runtime owned by different platform.
What is the error, Pl help.
Many thanks in advance
Murthy

I fixed the problem

Differences Between Object And System Privileges

Hi,
Whats the difference between object and system privileges in oracle?
Cheers
Paul

System Privileges
A system privilege is the right to perform a particular action, or to perform an action on any schema objects of a particular type. For example, the privileges to create tablespaces and to delete the rows of any table in a database are system privileges.
Schema Object Privileges
A schema object privilege is a privilege or right to perform a particular action on a specific schema object:
For example, the privilege to delete rows from the departments table is an object privilege.
Some schema objects, such as clusters, indexes, triggers, and database links, do not have associated object privileges. Their use is controlled with system privileges. For example, to alter a cluster, a user must own the cluster or have the ALTER ANY CLUSTER system privilege.
A schema object and its synonym are equivalent with respect to privileges. That is, the object privileges granted for a table, view, sequence, procedure, function, or package apply whether referencing the base object by name or using a synonym.
Granting object privileges on a table, view, sequence, procedure, function, or package to a synonym for the object has the same effect as if no synonym were used. When a synonym is dropped, all grants for the underlying schema object remain in effect, even if the privileges were granted by specifying the dropped synonym.

Sql for system privileges

Similar Messages

Maybe you are looking for