SQL Help required

Hi,
I have a table "upsd_intmdt_new", which holds data for different snapshot_key or for different dates. Now I can write a query as shown below :
select     F_NAME               F_NAME,
     itm_cd_key           itm_cd_key,
     max(itm_cd)          itm_cd,
     max(opr_cd)          opr_cd,
     max(opr_dsc)          opr_dsc,
     max(chpst_type)          chpst_type,
     max(fmly)                fmly,
     max(qtr_key)          qtr_key,
     max(fscl_yr_qtr_int_nbr)     fscl_yr_qtr_int_nbr,
     mo_key                mo_key,
     max(fscl_yr_mo_nbr)          fscl_yr_mo_nbr,
     max(frst_day_fscl_mo_dt)     frst_day_fscl_mo_dt ,
     sls_org_cd           sls_org_cd,
     max(sls_org_dsc)          sls_org_dsc,
     max(PASD_CGID)          PASD_CGID
from     upsd_intmdt_new
where snpsht_key in (2050, 2052)
group by      F_NAME,
     itm_cd_key,
     mo_key,
     sls_org_cd
Now I want max(PASD_CGID) will be taken for snpsht_key=2052 only, and all other max will be calculated from the combination dataset of snpsht_key=2050 & 2052.
Is this possible to write in a single query.
Your help will really be appriciated in this case.
Regards,
Koushik

I am able to handle it in the following way :
select     F_NAME                    F_NAME,
     itm_cd_key                     itm_cd_key,
     max(itm_cd)                    itm_cd,
     max(opr_cd)                    opr_cd,
     max(opr_dsc)               opr_dsc,
     max(chpst_type)               chpst_type,
     max(fmly)                fmly,
     max(qtr_key)                    qtr_key,
     max(fscl_yr_qtr_int_nbr)     fscl_yr_qtr_int_nbr,
     mo_key                     mo_key,
     max(fscl_yr_mo_nbr)          fscl_yr_mo_nbr,
     max(frst_day_fscl_mo_dt)     frst_day_fscl_mo_dt ,
     sls_org_cd                     sls_org_cd,
     max(sls_org_dsc)               sls_org_dsc,
     max(case when snpsht_key=2052 then PASD_CGID end)          PASD_CGID
from     upsd_intmdt_new
where snpsht_key in (2050, 2052)
group by      F_NAME,
     itm_cd_key,
     mo_key,
     sls_org_cd
Hopefully this is the correct way of handling this thing.
Regards,
Koushik

Similar Messages

Unix-pl/sql help required

Sir, I am working for some data warehouse project in which I want to invoke unix shell command from PL/SQL Block, for example, I want to invoke a sql loder from a PL/SQL block. Is it possible. I have searched in all possible resources available with me but couldn't find any solution.
Any sample code will be of great help.

You can try either of these, I don't know about the second one, I think you have to search that site for a Pl/SQL package to execute host commands.
http://www.ckamco.com/Execute_Command.zip
http://www.quest-pipelines.com/Pipelines/PLSQL/archives.htm#code

Whats wrong in this SQL - Help Required..

Hi,
Can you please tell me what is wrong in this SQL Query.
select
case
when
(SELECT territory_code
FROM
          fnd_territories
          where territory_code like 'BR') then
(SELECT description
                    FROM fnd_descr_flex_contexts_tl
WHERE descriptive_flexfield_name='JG_PO_VENDOR_SITES'
                    AND descriptive_flex_context_code='JL.BR.APXVDMVD.SITES')
else
NULL
end result
FROM dual;
Thanks,

Based on the info supplied, here's a few possibilities,
you've typed the table name incorrectly
You've not restricted the results correctly,
you're using a version of oracle that doesn't support the CASE expression
You're using SQL server, which doesn't have the dual table.
you've / someone has manipulated teh dual table so that it now has 4billion and one rows
The subquery in your case statement returns more than one row.
1. It's poorly/not formatted.
2. It's not in code tags
3. You haven't given us anywhere near enough info e.g. Error messages, what you're actually trying to do etc, etc

T-SQL help require to construct a query to sum on varchar column

Guys,
I have a column varchar(400) wherein currency_amount is stored. I need to sum currencyamount however getting the error like Arithmetic overflow error converting varchar to data type numeric.
Any suggestion? it has some values which are having 37 digits after decimal. Might be this is the possible reason.
Few Ex. .240189558129349189976534590012169112856, .312064488126471335301440042584800148951
This is the query i am trying
select sum(convert(decimal(38,20),columnname))
FROM tablename

Did you try converting to float? Also, why do you have such high number of digits if you're talking about currency amounts? Normally, 2 digits is enough for currency.
For every expert, there is an equal and opposite expert. - Becker's Law
My blog
My TechNet articles

ERROR: The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used

As the title indicates, I'm having this error during installation. It occurs when I try to install
the "Management Studio" part of the program. I've tried a bunch of things like
copying to hard drive and installing, but to no avail. To isolate the problem, i've even tried removing Reporting services, since at the time of failure it seems to be trying to install/configure the Microsoft.Reporting Services dll.
Additionally, I have SQL Express installed (installed it separately, not as part of the SQL 2005 DVD), VS 2005, .NET Framework 2.0, SQL Management Studio Express CTP. Could the Management Studio Express be causing a problem?
Please note:
Although the error is about missing / corrupt Sql.cab, I have searched the entire dvd for the said file, but there is no file called Sql.cab on the dvd. Am I missing something?
Any solution would be greatly appreciated.
TIA

I was installing SQLServer2014_Developer which I had just purchased as a 64bit iso download to VirtualBox Windows_10_64bit Instance that i had just created.
I got the following error about 90% through the SQLServer2014_Developer install:
>>> ===================================================================
>>> SQL Server 2014
>>> ===================================================================
>>> TITLE: Microsoft SQL Server 2014 Setup
>>> ------------------------------
>>> The following error has occurred:
>>> The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used.
>>> This could indicate a network error, an error reading from the CD-ROM, or a problem with this package.
>>> For help, click:
>>> h t t p ://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xDF039760%25401201%25401
>>> ------------------------------
A quick rerun of failed SQLServer2014_Developer install just for the Management_Tools and review of the SQLServer2014_Developer install logs
confirmed error still prelevant:
C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\...
>>> ...
>>> Detailed results:
>>>   Feature:                       Management Tools - Complete
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred for a dependency of the feature causing the setup process for the feature to fail.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>>
>>>   Feature:                       Management Tools - Basic
>>>   Status:                        Failed: see logs for details
>>>   Reason for failure:            An error occurred during the setup process of the feature.
>>>   Next Step:                     Use the following information to resolve the error, and then try the setup process again.
>>>   Component name:                SQL Server Management Services
>>>   Component error code:          1335
>>>   Component log file:            C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20150206_223659\sql_ssms_Cpu64_1.log
>>>   Error description:             The cabinet file 'Sql.cab' required for this installation is corrupt and cannot be used. This could indicate a network error, an error reading
from the CD-ROM, or a problem with this package.
>>>   Error help link:               h t t p ://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=sql_ssms.msi%40InstallFiles%401335
>>> ...
Reading though the many Google hits going way back AD-2000/AD-2006/AD-2011/AD-2014 for various installs including SQLserver_2008/2012 etc
I noted that in the main there were x2 common themes.
1. Problem with corruption the original download.
--- Although I had not run the download checksum
--- I had previously just installed SQLServer2014_Developer successfully, so at the minute, I was confident downloads were ok.
--- Many hits mentioned this 'Sql.cab' file and 90% of the install had been successfull -
--- I figured the chances of us all having corruption of this one files were agaianst the odds and
---   probably re-downloading it would not fix this - but I kicked a re-download off anyhow .
While it was running ...
2. Network issue when installing - some of the hits asked if could be related to Virtual drives.
--- This struck a chord
--- I had downloaded the SQLServer2014 .iso to my host PC and then copied it onto one OneDrive so I could access it within the VirtualBox_Windows_10.
--- From within the VirtualBox_Windows_10 I had then used SetupVirtualCloneDrive5450.exe to mount the OneDrive SQLServer2014 .iso and then autorun the install.
What worked for me ...
--- I decided to
--- 1. Copy the same SQLServer2014 .iso that had failed to install x2 from OneDrive to the c:\ root of the VirtualBox_Windows_10.
--- 2. Remount the same SQLServer2014 .iso from c:\ again using SetupVirtualCloneDrive5450.exe.
--- 3. Re-run the SQLServer2014 install using the repair mode.
This time the [Maintenance] [Repair] install completed with all elements showing installed successfully.
Hope this helps
Andy

XSLT mapping Help Required.

XSLT mapping Help Required.
Hi Experts,
I am New to XSLT Mapping. I am practising the below Example:
InputXML File:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
XSL StyleSheet File:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/Gen"
Xmlns:ns1=”http://XYZ.com/Test”>
<xsl:template match="/">
<ns1:MT_XSLT_Target>
<Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
<Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
</Name>
<Street> <xsl:value-of select="concat(concat(ns0:Mt_XSLT_Source/Person/Address/Houseno,' '),
ns0:Mt_XSLT_Source/Person/Address/Street)"/> </Street>
<City> <xsl:value-of select="ns0:Mt_XSLT_Source/Person/Address/City"/> </City>
</ns1:MT_XSLT_Target>
</xsl:template>
</xsl:stylesheet>
The Desired Output shuold be:
<?xml version="1.0" encoding="UTF-8"?>
<ns1:MT_XSLT_Target xmlns:ns1="http://XYZ.com/Test">
<Title>Male</Title>
<Name>Anshul Chowdhary</Name>
<Street>83/b 2nd Main</Street>
<City>Mysore</City>
</ns1:MT_XSLT_Target>
I have refered the xsl in xml and i am getting the below Oupt in a Single line like this:
Anshul Chowdhary Male 2nd Main 83/b Mysore
I am Unable to display in Target XML Fomrat as shown above. Please check and do the needful.
Regards,
GIRIDHAR

Hi,
I have used below for testing.
Input xml:
<?xml version="1.0" encoding="UTF-8"?>
<?xml-stylesheet type="text/xsl" href="Persons111.xsl"?>
<ns0:MT_XSLT_Source xmlns:ns0="http://XYZ.com/gen">
<Person>
<FirstName>Anshul</FirstName>
<LastName>Chowdhary</LastName>
<Gender>Male</Gender>
<Address>
<Street>2nd Main</Street>
<Houseno>83/b</Houseno>
<City>Mysore</City>
</Address> </Person>
</ns0:MT_XSLT_Source>
xsl code:
<?xml version='1.0' encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:ns0="http://XYZ.com/gen"
    xmlns:ns1="http://XYZ.com/Test">
    <xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
    <xsl:template match="/">
        <ns1:MT_XSLT_Target>
            <Title> <xsl:value-of select="ns0:MT_XSLT_Source/Person/Gender"/> </Title>
            <Name> <xsl:value-of select="concat(concat(ns0:MT_XSLT_Source/Person/FirstName,' '), ns0:MT_XSLT_Source/Person/LastName)"/>
            </Name>
            <Street> <xsl:value-of select="concat(concat(/ns0:MT_XSLT_Source/Person/Address/Houseno,' '),
                /ns0:MT_XSLT_Source/Person/Address/Street)"/> </Street>
            <City> <xsl:value-of select="/ns0:MT_XSLT_Source/Person/Address/City"/> </City>
        </ns1:MT_XSLT_Target>
    </xsl:template>
</xsl:stylesheet>
For testing in PI ,change the extension from .txt to .xsl and zip it and upload into PI as an imported archive .
Regards
Venkat

Urgent help required: Query regarding LC Variables

Hi All
Sometime earlier I was working on a performance issue raised by a customer. It was shell script that was taking almost 8-9 hrs to complete. During my research I came across a fact that there were some variables which were not set, the LC variables were impacting the sort funnel operations because of which the script was taking a long time to execute.
I asked them to export the following commands, after which the program went on smoothly and finished in a couple of mins:
export LC_COLLATE=en_US.ISO8859-1
export LC_MESSAGES=C
export LC_MONETARY=en_US.ISO8859-1
export LC_MONETARY=en_US.ISO8859-1
export HZ=100
export LC_CTYPE=en_US.ISO8859-1
export LANG=en_US.UTF-8
Later I did recover that setting the LC_COLLATE to C, is not helping and the program was again taking a lot of time. Few questions that I want to ask are:
1. Can someone please tell me, what each of these variable mean and how these values make a difference.
2. When I exported LC_COLLATE=en_US.ISO8859-1, it worked fine, but when i tried with the defalut value LC_COLLATE=C, then why the program didnt work.
As this issue is still going on, hence I would request All to provide their valuable inputs and let me know as much as possible.
Appreciate your help in this regard.
Thanks
Amit
Hi All
A new development in this regard. The customer has send us a screen shot in which they were trying to export the locale variable using the commands which I have pasted above. I can see in the screen shot that while exporting LC_COLLATE and LC_TYPE, they get a message that ""ksh: export: couldn't set locale correctly"".
Request everyone to please give their inputs as it's a bit urgent.
Thanks for all the help in advance.
Thanks
Amit
Some help required please...
Edited by: amitsinhaengg on Jul 22, 2009 2:03 AM
Edited by: amitsinhaengg on Jul 22, 2009 2:06 AM

LC_CTYPE
Controls the behavior of character handling functions.
LC_TIME
Specifies date and time formats, including month names, days of the week, and common full and abbreviated representations.
LC_MONETARY
Specifies monetary formats, including the currency symbol for the locale, thousands separator, sign position, the number of fractional digits, and so forth.
LC_NUMERIC
Specifies the decimal delimiter (or radix character), the thousands separator, and the grouping.
LC_COLLATE
Specifies a collation order and regular expression definition for the locale.
LC_MESSAGES
Specifies the language in which the localized messages are written, and affirmative and negative responses of the locale (yes and no strings and expressions).
You can use command
# locale -k LC_CTYPE
to see more detail about each type.

Help required - Sales order item is partially delivered but the item grayed

I have a sales order 123 having say item10 with qty 1, item20 with qty 10 , item 30 qty 12
Item 1 confirmed qty 1 and delivered qty is 1
Item 2 confirmed qty 10 and delivered qty 10
Item 3 confirmed qty 1 and delivered qty is 1
Now the item3 still has open requirements of 11 to be delivered. But the item is GRAYED OUT already.
even if I do ATP the qty is not confirming for the remaining 11 pieces.
Why is that? How to make that item out from GRAY.
How to confirm the remaining 11 qty for that item.
Help required as early as possible.
Appreciate ur help guys
Radha

hi Radha, how are you ?
     ---the partial deliveries in master data must have not been mentioned.
     ---the deliveries should be upto target quantity.
     ---check order type, item category and schedule line category.
     ---check unrestricted stock availability.
thank you
regards
Khera.

Search Help with in a serach help required in SRM 4.0

Hi,
Requirement: Search help required for Product Category field in the Search help for Product(BBPH_PRODUCT) in SRM portal.
This search help is used in Create shopping Cart transaction. The hyper link on Internal Goods/Services leads to the search help BBPH_PRODUCT.
My analysis:
The field Product Category (CATEGORY_ID) has search help(COM_CAT_HIER) attached to its data element. When I single test the search help BBPH_PRODUCT in SAP GUI,I can see the search help for field product category in the selection dialogue box. However the same does not appear on the corresponding screen in HTML.
Please let me know whether I need to do some thing to make the search help appear on the HTML screen?
With Regards,
Prakash Kamath

Hi Prakash,
I have the same problem but with another field. Unloading point. Could you please tell me how did you solve this problem with displaying F4 help on html/ SRM portal?
Thank you very much.
Best regards,
Danijela ZIvanovic

PIVOT sql help

Hi again
I need some PIVOT sql help
In this query:
SELECT
SUM([RATES]) as RATES
,SUM([CONVERSION])as CONVERSION
FROM REPORTING
outputs
RATES CONVERSION
23 234
How would change this query to display a table like:
Name Amount
RATES 23
CONVERSION 234
Keep up the good work !

nikos101 wrote:
> How would change this query to display a table like:
Do you *HAVE* to change the query... you could just display
it in the
desired format if that it the ultimate and only goal.
<table>
<tr>
<td>name</td>
<td>amount</td>
</tr>
<cfoutput query="sumQry">
<tr><td>Rates</td><td>#rates#</td></tr>
<tr><td>Conversion</td><td>#conversion#</td></tr>
</cfoutput>
</table>

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying "attempt to access invalid address" then "application not respo

Help required with Photoshop Elements 4.0 this has been installed on my new Toshiba laptop with windows 8.1 for some 18 months and operating well. Now it will not open, message pops up saying “attempt to access invalid address” then “application not responding” Suggestions how to access would be much appreciated. Tks. Stuart

What is the size of your hard disk? PSE 4 is a very old program and I suspect it is not able to access the entire hard disk on your machine. Just a thought here.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.

Help require with installing Adobe Acrobat onto my Macbook Pro Retina.
I have successfully installed all of my creative cloud apps with the exception being acrobat.
I cannot print from Indesign to PDF.
I have unistalled, reinstalled and still no Adobe Acrobat.
I now have to go back to Windows 8 and create the PDF's there.
Any one know how to get around this issue?
Thanks in advance
Kelvin

OSX has effectively killed the ability to print to pdf, (print to pdf eliminates most of the "Rich features" of current pdf).
Export from InDesign, always, excpet for the 1% of the time where you know why print to pdf would produce a better result.

Help required in Weblogic 6 - Creation & Configuration of Web Application

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Forum Home > Enterprise JavaBeans[tm]
Topic: Help required in Weblogic 6 - Creation & Configuration of Web Application
Duke Dollars
2 Duke Dollars assigned to this topic. Reward the best responses to your question
using the icons below, or transfer additional Duke Dollars to this topic.
Welcome moinshariff!
Watching this topic.
Previous Topic Next Topic
This topic has 1 reply on 1 page (Most recent message: Jan 23, 2002 1:05 AM)
Author: moinshariff Jan 22, 2002 4:55 AM
Hi,
I am using Weblogic 6. I have created a new Web
Application called Web (I have not used the DefaultWebApp_myserver).
And I have the following settings:
Name : Web
URI : Web
and Path : C:\Web
and placed my JSP files under c:\Web\
I am able to access the first page, but after that I am not able to access the
second page.
I get "Error 404--Not Found" on the browser. Basically the class file is not getting
created under /Web-inf/_tmp_war_myserver_myserver_Web/jsp_servlet/ folder .
I tried a work around for this. I copied all my files under one more folder called
web and placed this under C:\Web
The it works. Now I have 2 copied off all the files, 1 copy under c:\web and another
copy under c:\web\web\.
If I have the files under DefaultWebApp_myserver and have the setting as
Name: DefaultWebApp_myserver
URI: DefaultWebApp_myserver
Path: .\config\mydomain\applications
everything works fine.
Can any one please let me know if there is any configuration which has to be done
so that I do not duplicate the code in 2 directories
Thanks in advance.
Regards,
Moin

Help required network configuration - Gateway route settings get erased on reboot.

Oracle Linux 7
Linux myhostname 3.8.13-35.3.1.el7uek.x86_64 #2 SMP Wed Jun 25 15:27:43 PDT 2014 x86_64 x86_64 x86_64 GNU/Linux
#cat /etc/sysconfig/network-scripts/ifcfg-eno16780032
TYPE="Ethernet"
BOOTPROTO="none"
DEFROUTE="yes"
IPV4_FAILURE_FATAL="no"
IPV6INIT="yes"
IPV6_AUTOCONF="yes"
IPV6_DEFROUTE="yes"
IPV6_FAILURE_FATAL="no"
NAME="eno16780032"
UUID="2d1107e3-8bd9-49b1-b726-701c56dc368b"
ONBOOT="yes"
IPADDR0="34.36.140.86"
PREFIX0="22"
GATEWAY0="34.36.143.254"
DNS1="34.36.132.1"
DNS2="34.34.132.1"
DOMAIN="corp.halliburton.com"
HWADDR="00:50:56:AC:3F:F9"
IPV6_PEERDNS="yes"
IPV6_PEERROUTES="yes"
NM_CONTROLLED="no"
#route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         34.36.143.254   0.0.0.0         UG    0      0        0 eno16780032
34.36.140.0     0.0.0.0         255.255.252.0   U     0      0        0 eno16780032
169.254.0.0     0.0.0.0         255.255.0.0     U     1002   0        0 eno16780032
When I reboot the machine, the first line in route table gets erased, I then run:
#route add default gw 34.36.143.254
After which network works fine.
Help required. I don't want to use NetworkManager.

The following might be useful:
https://access.redhat.com/solutions/783533
"When transitioning from NetworkManager to using the network initscript, the default gateway parameter in the interface's ifcfg file will be depicted as 'GATEWAY0'. In order for the ifcfg file to be compatible with the network initscript, this parameter must be renamed to 'GATEWAY'. This limitation will be addressed in an upcoming release of RHEL7."
NetworkManager is now the default mechanism for RHEL 7. Personally I don't quite understand this, because as far as I can gather it is a program for systems to automatically detect and connect to known networks. I think such functionality can be useful when switching between wireless and wired networks, but for a server platform, I wonder.

Help Required - Oracle AS 10g

hello,
i have just downloaded oracle 10g softwares ...
i installed database then developer suite ... everything was fine ... until i was unable to run forms ...
a friend of mine told me that i need to install application server in order to run forms ...
1st of all i want to know that is there any way i can run forms without using Oracle AS 10g ...
2ndly i m facing problems in installation of Oracle AS 10g ...
i have studied online documentation but it ain't so helpfull for me ...
it seems like ... i have to install "Oracle AS infrastructure" first and then "Middle-tier: Business Intelligence and forms" ...
i m using P-IV (AMD Athlon XP 2100+, MMX, 1.7GHz Processor) with 512 MB DD RAM and Windows XP Professional with Service Pack 2 as Operating System.
During installation, the installer is warning dat only "Oracle Application Server (J2EE and Web Cache)" and "Oracle Application Server Developer Kits" are supported installations on dis platform ...
what should i do ... urgent help required ...
regards,
yasir ([email protected])

@ brusardl and rkogelhe
thanx for replying ...
brusardl
i didn't changed da port while installing Oracle AS ...
inspite i stopped all services using/listening from dat port ...
now ... i guess there has been some conflict ... as database listner stops automatically just after starting !!!
rkogelhe
can u plz tell me what is BI version of Forms ...
and can i view forms running on web without installing Oracle AS with OC4J bundled in Forms ???
Another Problem:
I re-installed Database, Developer suite and then Oracle AS infrastructure ...
everthing went fine ...
when i installed Oracle AS Middle Tier - Business Intelligence & Forms
during installation ... some configuration assistants failed/skipped ...
da OC4J configration assistant at 5th last position failed ... so remaining 4 configuration assistants were skipped ...
at da end it said ... Installation Succesfull but with some configuration assistants failed/skipped ...
is dis a installation useless ... can i fix dis ?
regards,
yasir

SQL Help required

Similar Messages

Maybe you are looking for