SQL Query for Database Connections

What would be the proper syntax or DBA table to query and find out how many database connections there are currently? Thanks for all of your help!!
Marlan

select * from v$session;Some entries in this view are dynamic processes (type = 'BACKGROUND') and you may want to exclude those depending on your requirements.

Similar Messages

  • Error while executing a sql query for select

    HI All,
    ORA-01652: unable to extend temp segment by 128 in tablespace PSTEMP i'm getting this error while i'm executing the sql query for selecting the data.

    I am having 44GB of temp space, while executing the below query my temp space is getting full, Expert please let us know how the issue can be resolved..
    1. I dont want to increase the temp space
    2. I need to tune the query, please provide your recomendations.
    insert /*+APPEND*/ into CST_DSA.HIERARCHY_MISMATCHES
    (REPORT_NUM,REPORT_TYPE,REPORT_DESC,GAP,CARRIED_ITEMS,CARRIED_ITEM_TYPE,NO_OF_ROUTE_OF_CARRIED_ITEM,CARRIED_ITEM_ROUTE_NO,CARRIER_ITEMS,CARRIER_ITEM_TYPE,CARRIED_ITEM_PROTECTION_TYPE,SOURCE_SYSTEM)
    select
    REPORTNUMBER,REPORTTYPE,REPORTDESCRIPTION ,NULL,
    carried_items,carried_item_type,no_of_route_of_carried_item,carried_item_route_no,carrier_items,
    carrier_item_type,carried_item_protection_type,'PACS'
    from
    (select distinct
    c.REPORTNUMBER,c.REPORTTYPE,c.REPORTDESCRIPTION ,NULL,
    a.carried_items,a.carried_item_type,a.no_of_route_of_carried_item,a.carried_item_route_no,a.carrier_items,
    a.carrier_item_type,a.carried_item_protection_type,'PACS'
    from CST_ASIR.HIERARCHY_asir a,CST_DSA.M_PB_CIRCUIT_ROUTING b ,CST_DSA.REPORT_METADATA c
    where a.carrier_item_type in('Connection') and a.carried_item_type in('Service')
    AND a.carrier_items=b.mux
    and c.REPORTNUMBER=(case
    when a.carrier_item_type in ('ServicePackage','Service','Connection') then 10
    else 20
    end)
    and a.carrier_items not in (select carried_items from CST_ASIR.HIERARCHY_asir where carried_item_type in('Connection') ))A
    where not exists
    (select *
    from CST_DSA.HIERARCHY_MISMATCHES B where
    A.REPORTNUMBER=B.REPORT_NUM and
    A.REPORTTYPE=B.REPORT_TYPE and
    A.REPORTDESCRIPTION=B.REPORT_DESC and
    A.CARRIED_ITEMS=B.CARRIED_ITEMS and
    A.CARRIED_ITEM_TYPE=B.CARRIED_ITEM_TYPE and
    A.NO_OF_ROUTE_OF_CARRIED_ITEM=B.NO_OF_ROUTE_OF_CARRIED_ITEM and
    A.CARRIED_ITEM_ROUTE_NO=B.CARRIED_ITEM_ROUTE_NO and
    A.CARRIER_ITEMS=B.CARRIER_ITEMS and
    A.CARRIER_ITEM_TYPE=B.CARRIER_ITEM_TYPE and
    A.CARRIED_ITEM_PROTECTION_TYPE=B.CARRIED_ITEM_PROTECTION_TYPE
    AND B.SOURCE_SYSTEM='PACS'
    Explain Plan
    ==========
    Plan
    INSERT STATEMENT ALL_ROWSCost: 129 Bytes: 1,103 Cardinality: 1                                                        
         20 LOAD AS SELECT CST_DSA.HIERARCHY_MISMATCHES                                                   
              19 PX COORDINATOR                                              
                   18 PX SEND QC (RANDOM) PARALLEL_TO_SERIAL SYS.:TQ10002 :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1                                         
                        17 NESTED LOOPS PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,103 Cardinality: 1                                    
                             15 HASH JOIN RIGHT ANTI NA PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 129 Bytes: 1,098 Cardinality: 1                               
                                  4 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 63 Bytes: 359,283 Cardinality: 15,621                          
                                       3 PX SEND BROADCAST PARALLEL_TO_PARALLEL SYS.:TQ10001 :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621                     
                                            2 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621                
                                                 1 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1001Cost: 63 Bytes: 359,283 Cardinality: 15,621           
                                  14 NESTED LOOPS ANTI PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 40,256,600 Cardinality: 37,448                          
                                       11 HASH JOIN PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 65 Bytes: 6,366,160 Cardinality: 37,448                     
                                            8 BUFFER SORT PARALLEL_COMBINED_WITH_CHILD :Q1002               
                                                 7 PX RECEIVE PARALLEL_COMBINED_WITH_PARENT :Q1002Cost: 1 Bytes: 214 Cardinality: 2           
                                                      6 PX SEND BROADCAST PARALLEL_FROM_SERIAL SYS.:TQ10000 Cost: 1 Bytes: 214 Cardinality: 2      
                                                           5 INDEX FULL SCAN INDEX CST_DSA.IDX$$_06EF0005 Cost: 1 Bytes: 214 Cardinality: 2
                                            10 PX BLOCK ITERATOR PARALLEL_COMBINED_WITH_CHILD :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448                
                                                 9 MAT_VIEW ACCESS FULL MAT_VIEW PARALLEL_COMBINED_WITH_PARENT CST_ASIR.HIERARCHY :Q1002Cost: 63 Bytes: 2,359,224 Cardinality: 37,448           
                                       13 TABLE ACCESS BY INDEX ROWID TABLE PARALLEL_COMBINED_WITH_PARENT CST_DSA.HIERARCHY_MISMATCHES :Q1002Cost: 0 Bytes: 905 Cardinality: 1                     
                                            12 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT SYS.HIERARCHY_MISMATCHES_IDX3 :Q1002Cost: 0 Cardinality: 1                
                             16 INDEX RANGE SCAN INDEX PARALLEL_COMBINED_WITH_PARENT CST_DSA.IDX$$_06EF0001 :Q1002Cost: 1 Bytes: 5 Cardinality: 1

  • Dynamically Pass sql query in Database adapter

    hi',
    How can we dynamically pass sql query in Database adapter, is there any way, I am using SOA 11G.
    Thanks
    Yatan

    Hi,
    Tried that too. No luck. Gives me this.
    The selected operation process could not be invoked.
    An exception occured while invoking the webservice operation. Please see logs for more details.
    oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occured when binding was invoked.
    Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'selectUsingIn' failed due to: Pure SQL Exception.
    Pure SQL Execute of select interface_id, property_name, property_value from ( (?) ) failed.
    Caused by java.sql.SQLSyntaxErrorException: ORA-00903: invalid table name
    The invoked JCA adapter raised a resource exception.
    Please examine the above error message carefully to determine a resolution.
    Regards,
    Neeraj Sehgal

  • How Can I find SQL Query in Database

    Dear Experts,
    How Can I find SQL Query in Database.

    Hi,
    U mena what query got executed in db? u can try V$SQL for it.
    Regards
    Bharath

  • Problem writing a sql query for a select list based on a static LOV

    Hi,
    I have the following table...
    VALIDATIONS
    ID          Number     (PK)
    APP_ID          Number     
    REQUESTED     Date          
    APPROVED     Date          
    VALID_TIL     Date
    DEPT_ID          Number     (FK)
    I have a search form with the following field item variables...
    P11_DEPT_ID (select list based on dynamic LOV from depts table)
    P11_VALID (select list based on static Yes/No LOV)
    A report on the columns of the Validations table is shown based on the values in the search form. So far, my sql query for the report is...
    SELECT v.APP_ID,
    v.REQUESTED,
    v.APPROVED,
    v.VALID_TIL,
    d.DEPT
    FROM DEPTS d, VALIDATIONS v
    WHERE d.DEPT_ID = v.DEPT_ID(+)
    AND (d.DEPT_ID = :P11_DEPT_ID OR :P11_DEPT_ID = -1)
    This query works so far. My problem is that I don't know how to do a search based on the P11_VALID item - if 'yes' is selected, then the VALID_TIL date is still valid. If 'no' is selected then the VALID_TIL date has passed.
    Can anyone help me to extend my query to include this situation?
    Thanks.

    Hello !
    Let's have a look at my example:create table test
    id        number
    ,valid_til date
    insert into test values( 1, sysdate-3 );
    insert into test values( 2, sysdate-2 );
    insert into test values( 3, sysdate-1 );
    insert into test values( 4, sysdate );
    insert into test values( 5, sysdate+1 );
    insert into test values( 6, sysdate+2 );
    commit;
    select * from test;
    def til=yes
    select *
      from test
      where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
           =decode('&til','yes',1,-1);
    def til=no
    select *                                                                               
      from test                                                                            
      where decode(sign(trunc(valid_til)-trunc(sysdate)),1,1,0,1,-1)
           =decode('&til','yes',1,-1);  
    drop table test;  It's working fine, I've tested it.
    The above changes to my first idea I did because of time portion of the DATE datatype in Oracle and therefore the wrong result for today.
    For understandings:
    1.) TRUNC removes the time part of DATE
    2.) The difference of to date-values is the number of days between.
    3.) SIGN is the mathematical function and gives -1,0 or +1 according to an negative, zero or positiv argument.
    4.) DECODE is like an IF.
    Inspect your LOV for the returning values. According to my example they shoul be 'yes' and 'no'. If your values are different, you may have to modify the DECODE.
    Good luck,
    Heinz

  • Could not load library for database connection LCA

    Hi,
    I am facing RFC connection prblem while connectiong to database. I have installed SCM5.1 and live cache in single server
    Please find the logs.
    Work process log:
    B Mon Jul 20 11:19:13 2009
    B  create_con (con_name=LCA)
    B  Loading DB library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll' ...
    M  *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll) Error 126 [dlnt.c       241]
    M          Error 126 = "The specified module could not be found."
    B  *** ERROR => Couldn't load library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll'
    [dbcon.c      4731]
    B  ***LOG BYG=> could not load library for database connection LCA        [dbds#1 @ 1035] [dbds    1035 ]
    A
    A Mon Jul 20 11:21:58 2009
    A  GENER starting remote generation: /SAPAPO/OM_SYNC_LC_DB (requested by W1).
    B
    SM21:
    No shared library found for the database with ID LCA|
    No shared library found for the database with ID LCA
    /SAPAPO/OM17|/SAPAPO/OM_SYNC_LC_DB|K |SAP Web AS Problem|SBAC   |
    Documentation for system log message BY G :
    As well as the standard connection, an attempt was made to set up
    another database connection, under the specified ID. The Shared Library
    for this second database could not be found.
    The Shared Library is usually found in the the Executable
    directory (profile parameter DIR_LIBRARY) under the name dbs
    <dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
    stands for the operating system-specific extension of the Shared
    Libraries.
    The database type is determined from the entry that corresponds to the
    specified DB ID in the table DBDCON. Check whether the data in this
    entry is correct.
    ST22
    Runtime Errors         DBIF_DSQL2_CONNECTERR
    Exception              CX_SY_NATIVE_SQL_ERROR
    Date and Time          20.07.2009 11:22:21
    Short text
    Error setting up a secondary database connection
    What happened?
    Connection to database system not possible with identifier "LCA".
    |----
    System environment
    SAP-Release 700
    Application server... "
    Network address...... "
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 8
    Shortdump setting.... "full"
    Database server... "
    Database type..... "ORACLE"
    Database name..... "SC7"
    Database user ID.. "SAPSC7"
    Terminal................. " "
    Char.set.... "C"
    SAP kernel....... 701
    created (date)... "Jul 6 2009 23:47:55"
    create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
    Database version. "OCI_10201_SHARE (10.2.0.2.0) "
    Patch level. 50
    Patch text.. " "
    Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
    SAP database version. 701
    Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
    NT 6.0"
    Information on where terminated
    Termination occurred in the ABAP program "SAPLSLCAPPS" - in
    "LCA_EXISTS_LCA_ROUTINE".
    The main program was "/SAPAPO/TS_BATCH_RUN ".
    In the source code you have the termination point in line 23
    of the (Include) program "LSLCAPPSU05".
    The program "SAPLSLCAPPS" was started as a background job.
    Job Name....... "MACROS"
    Job Initiator.. "SC7GEN"
    Job Number..... 10222002
    The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
    in
    procedure "LCA_EXISTS_LCA_ROUTINE" "(FUNCTION)", but it was neither handled
    locally nor declared
    in the RAISING clause of its signature.
    The procedure is in program "SAPLSLCAPPS "; its source code begins in line
    1 of the (Include program "LSLCAPPSU05 ".
    Please help me to resolve the issue.
    Suraj

    Hi Natalia Khlopina,
    I have raised OSS message to SAP.
    Below is the information
    E:\usr\sap\SC7\SYS\exe\uc\Copy_ of_NTAMD64_15062009>sdbregview -l
    Server Utilities    e:/sapdb/programs      7.7.02.08     64 bit    valid
    DB Analyzer         e:/sapdb/programs      7.7.02.08     64 bit    valid
    PCR 7301            e:/sapdb/programs      7.3.01.21               valid
    PCR 7500            e:/sapdb/programs      7.5.00.42     64 bit    valid
    SAP Utilities       e:/sapdb/programs      7.7.02.08     64 bit    valid
    APO LC APPS         f:/sapdb/lcs/db/sap    6.00.004      64 bit    valid
    Redist Python       e:/sapdb/programs      7.7.02.08     64 bit    valid
    Base                e:/sapdb/programs      7.7.02.08     64 bit    valid
    JDBC                e:/sapdb/programs      7.6.03.02               valid
    Messages            e:/sapdb/programs      MSG 0.5010              valid
    ODBC                e:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC 77           e:/sapdb/programs      7.7.02.08     64 bit    valid
    Database Kernel     f:/sapdb/lcs/db        7.7.02.08     64 bit    valid
    Loader              e:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC              e:/sapdb/programs      7.7.02.08     64 bit    valid
    SQLDBC 76           e:/sapdb/programs      7.6.01.15     64 bit    valid
    Fastload API        e:/sapdb/programs      7.7.02.08     64 bit    valid
    C:\Documents and Settings\sc7adm>disp+work
    disp+work information
    kernel release                701
    kernel make variant           701_REL
    compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
    compiled for                  64 BIT
    compilation mode              UNICODE
    compile time                  Jul  6 2009 23:47:55
    update level                  0
    patch number                  50
    source id                     0.050
    supported environment
    database (SAP, table SVERS)   700
                                  701
    operating system
    Windows NT 5.0
    Windows NT 5.1
    Windows NT 5.2
    Windows NT 6.0
    Thanks for quick responce.
    Suraj

  • Extracting the Logical sql query for the specified report  in OBIEE 11g

    Hi ,
    I want to extract the logical SQL Query for the Particular report in OBIEE 11.1.1.5.
    Any pointers related to this will be very helpful.
    Thanks,
    Sonali

    for a try please add Logical sql view to ur report it will dispaly the Logical sql for that Report..
    Hope it will helps you.

  • Oracle SQL query for getting specific special characters from a table

    Hi all,
    This is my table
    Table Name- Table1
    S.no    Name
    1          aaaaaaaa
    2          a1234sgjghb
    3          a@3$%jkhkjn
    4          abcd-dfghjik
    5          bbvxzckvbzxcv&^%#
    6          ashgweqfg/gfjwgefj////
    7          sdsaf$([]:'
    8          <-fdsjgbdfsg
    9           dfgfdgfd"uodf
    10         aaaa  bbbbz#$
    11         cccc dddd-/mnm
    The output has to be
    S.no    Name
    3          a@3$%jkhkjn
    5          bbvxzckvbzxcv&^%#
    7          sdsaf$([]:'
    8          <-fdsjgbdfsg
    10         aaaa  bbbbz#$
    It has to return "Name" column which is having special characters,whereas some special chars like -, / ," and space are acceptable.
    The Oracle query has to print columns having special characters excluding -,/," and space
    Can anyone help me to get a SQL query for the above.
    Thanks in advance.

    You can achieve it in multiple ways. Here are few.
    SQL> with t
      2  as
      3  (
      4  select 1 id, 'aaaaaaaa' name from dual union all
      5  select 2 id, 'a1234sgjghb' name from dual union all
      6  select 3 id, 'a@3$%jkhkjn' name from dual union all
      7  select 4 id, 'abcd-dfghjik' name from dual union all
      8  select 5 id, 'bbvxzckvbzxcv&^%#' name from dual union all
      9  select 6 id, 'ashgweqfg/gfjwgefj////' name from dual union all
    10  select 7 id, 'sdsaf$([]:''' name from dual union all
    11  select 8 id, '<-fdsjgbdfsg' name from dual union all
    12  select 9 id, 'dfgfdgfd"uodf' name from dual union all
    13  select 10 id, 'aaaa  bbbbz#$' name from dual union all
    14  select 11 id, 'cccc dddd-/mnm' name from dual
    15  )
    16  select *
    17    from t
    18   where regexp_like(translate(name,'a-/" ','a'), '[^[:alnum:]]');
            ID NAME
             3 a@3$%jkhkjn
             5 bbvxzckvbzxcv&^%#
             7 sdsaf$([]:'
             8 <-fdsjgbdfsg
            10 aaaa  bbbbz#$
    SQL> with t
      2  as
      3  (
      4  select 1 id, 'aaaaaaaa' name from dual union all
      5  select 2 id, 'a1234sgjghb' name from dual union all
      6  select 3 id, 'a@3$%jkhkjn' name from dual union all
      7  select 4 id, 'abcd-dfghjik' name from dual union all
      8  select 5 id, 'bbvxzckvbzxcv&^%#' name from dual union all
      9  select 6 id, 'ashgweqfg/gfjwgefj////' name from dual union all
    10  select 7 id, 'sdsaf$([]:''' name from dual union all
    11  select 8 id, '<-fdsjgbdfsg' name from dual union all
    12  select 9 id, 'dfgfdgfd"uodf' name from dual union all
    13  select 10 id, 'aaaa  bbbbz#$' name from dual union all
    14  select 11 id, 'cccc dddd-/mnm' name from dual
    15  )
    16  select *
    17    from t
    18   where translate
    19         (
    20            lower(translate(name,'a-/" ','a'))
    21          , '.0123456789abcdefghijklmnopqrstuvwxyz'
    22          , '.'
    23         ) is not null;
            ID NAME
             3 a@3$%jkhkjn
             5 bbvxzckvbzxcv&^%#
             7 sdsaf$([]:'
             8 <-fdsjgbdfsg
            10 aaaa  bbbbz#$
    SQL>

  • Build dynamic SQL query in Database Adapter.

    Hi All,
    I have a requirement to build dynamic sql query at Database Adapter.
    My BPEL process is getting search spec as input from siebel. I need to process this searchspec in BPEL and need to build the SQL query dynamically at Database Adapter to fetch the records from DB.
    it goes like this....
    1. Sieble Search Spec: city1 OR city2 OR city3 OR city4 .....
    I need to build query as
    select * from S_ADDR_PER where city like 'city1' OR city like 'city2' OR city like 'city3' OR city like 'city4' ......
    2. Siebel Search spec: city1 AND country1 AND state1....
    I need to build query as
    Select * from S_ADDR_PER where city like 'city1' AND country like 'country1' AND state like 'state1' ....
    3. Siebel Search spec: state
    I need to build query as
    select * from S_ADDR_PER where state like '%state%';
    Is it feasible in Database Adapter? if its Yes.
    Any guidelines to achieve this?
    Thank you
    Chandra

    Hi All,
    I have a requirement to build dynamic sql query at Database Adapter.
    My BPEL process is getting search spec as input from siebel. I need to process this searchspec in BPEL and need to build the SQL query dynamically at Database Adapter to fetch the records from DB.
    it goes like this....
    1. Sieble Search Spec: city1 OR city2 OR city3 OR city4 .....
    I need to build query as
    select * from S_ADDR_PER where city like 'city1' OR city like 'city2' OR city like 'city3' OR city like 'city4' ......
    2. Siebel Search spec: city1 AND country1 AND state1....
    I need to build query as
    Select * from S_ADDR_PER where city like 'city1' AND country like 'country1' AND state like 'state1' ....
    3. Siebel Search spec: state
    I need to build query as
    select * from S_ADDR_PER where state like '%state%';
    Is it feasible in Database Adapter? if its Yes.
    Any guidelines to achieve this?
    Thank you
    Chandra

  • How to create sql query for item master with operator LIKE with variables?

    hi all,
    How to create sql query for item master with
    operator LIKE(Contains,Start With,End With) with variables using query generator in SAP B1 ?
    Jeyakanthan

    Hi Jeyakanthan,
    here is an example (put the like statement into the where field)
    SELECT T0.CardCode, T0.CardName FROM OITM T0 WHERE T0.CardName Like '%%test%%'
    The %% sign is a wildcard. If you need start with write 'test%%' and otherwise ends with '%%test'. For contains you need '%%test%%'. You also could combinate this statements like 'test%%abc%%'. This means starts with test and contains abc.
    Regards Steffen

  • How to write sql query for counting pairs from below table??

    Below is my SQL table structure.
    user_id | Name | join_side | left_leg | right_leg | Parent_id
    100001 Tinku Left 100002 100003 0
    100002 Harish Left 100004 100005 100001
    100003 Gorav Right 100006 100007 100001
    100004 Prince Left 100008 NULL 100002
    100005 Ajay Right NULL NULL 100002
    100006 Simran Left NULL NULL 100003
    100007 Raman Right NULL NULL 100003
    100008 Vijay Left NULL NULL 100004
    It is a binary table structure.. Every user has to add two per id under him, one is left_leg and second is right_leg... Parent_id is under which user current user is added.. Hope you will be understand..
    I have to write sql query for counting pairs under id "100001". i know there will be important role of parent_id for counting pairs. * what is pair( suppose if any user contains  both left_leg and right_leg id, then it is called pair.)
    I know there are three pairs under id "100001" :-
    1.  100002 and 100003
    2.  100004 and 100005
    3.  100006 and 100007
        100008 will not be counted as pair because it does not have right leg..
     But i dont know how to write sql query for this... Any help will be appreciated... This is my college project... And tommorow is the last date of submission.... Hope anyone will help me...
    Suppose i have to count pair for id '100002'. Then there is only one pair under id '100002'. i.e 100004 and 100005

    Sounds like this to me
    DECLARE @ID int
    SET @ID = 100001--your passed value
    SELECT left_leg,right_leg
    FROM table
    WHERE (user_id = @ID
    OR parent_id = @ID)
    AND left_leg IS NOT NULL
    AND right_leg IS NOT NULL
    Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

  • How to write sql query for below example.

    Hi,
    I have requirement.
    There are number of rows and I need the result through query as follows.Please help me to proved sql query for below mentioned requirement.
    example: table TEST.
    COLA COLB COLC COLD
    MANAGER 5 NULL null
    SR.MANAGE 6 3 NULL
    VP 5 5 4
    I have to write the sql query if COLA IS MANAGER THEN CONSIDER MANGER RECORD,AND IF ANY COLUMN FILED IS NULL FOR MANGER THEN CONSIDER COLA IS SR.MANGER, AND IF ANY COLUMN FILED IS NULL FOR SR,MANGER THEN CONSIDER VP records.
    I need output as below.
    COLB COLC COLD
    5(MANGER) 3(sr.manger) 5(vp)
    Please provide the for above mentioned output.
    Thanks

    <<if COLA IS MANAGER THEN CONSIDER MANGER RECORD>>
    What does this sentence means? COLA does not cnatin a single record but the number of records with diffrent values.
    Regards
    Arun

  • How to write sql query for below mentioned eaxmple.

    Hi,
    I have requirement.
    There are number of rows and I need the result through query as follows.Please help me to proved sql query for below mentioned requirement.
    example: table TEST.
    COLA COLB COLC COLD COLE COLF MANAGER 5 NULL NULL 3 NULL
    SR.MANAGER 6 3 NULL NULL NULL
    VP 5 5 4 5 5
    I have to write the sql query if COLA IS MANAGER THEN CONSIDER MANGER RECORD,AND IF ANY COLUMN FILED IS NULL FOR MANGER THEN CONSIDER COLA IS SR.MANGER, AND IF ANY COLUMN FILED IS NULL FOR SR,MANGER THEN CONSIDER VP records.
    I need output as below.
    COLB COLC COLD COLE COLF
    5(manager) 3(sr.manger) 4(vp) 3(manger) 3(vp)
    Please provide the for above mentioned output.
    Thanks

    Duplicate thread. please view the answer posted in your first thread.
    how to write sql query.
    And, please don't post any duplicate thread.
    Regards.
    Satyaki De.

  • OIM sql Query for getting the status of the task which got failed

    Hi Everyone,
    We have a requirement like we need to get the status of a particular task(say Create User in OID resource - Completed\Rejected status) for the particular user.We are able to get the status of the resource provisioed to the user but not the status of the particular task getting trigerred for the user.can someone put some light on this.We need to get the SQL query for this.
    Thanks in Advance.
    Regards,
    MKN

    Hi
    Use this sample query to get the task status, also check the cooments
    SELECT USR.USR_LOGIN, OSI.SCH_KEY,SCH.SCH_STATUS,STA.STA_BUCKET FROM
    OSI,SCH,STA,MIL,TOS,PKG,OIU,USR,OBJ,OST
    WHERE OSI.MIL_KEY=MIL.MIL_KEY
    AND SCH.SCH_KEY=OSI.SCH_KEY
    AND STA.STA_STATUS=SCH.SCH_STATUS
    AND TOS.PKG_KEY=PKG.PKG_KEY
    AND MIL.TOS_KEY=TOS.TOS_KEY
    AND OIU.USR_KEY=USR.USR_KEY
    AND OIU.OST_KEY=OST.OST_KEY
    AND OST.OBJ_KEY=OBJ.OBJ_KEY
    AND OSI.ORC_KEY=OIU.ORC_KEY
    AND OBJ.OBJ_NAME='AD User'
    AND OST.OST_STATUS = 'Provisioning' -- filter accordinglly
    AND STA.STA_BUCKET = 'Pending' -- filter accordinglly
    AND PKG.PKG_NAME='AD User' -- filter accordinglly
    AND MIL.MIL_NAME='System Validation' ---- filter accordinglly
    Thanks,
    Kuldeep

  • Provide sql query for below one

    hi everyone,
    in my source table [finanace_dept] contains two columns [finance_id,r_mature_kd] with 2 million records and sample data given below.
    finance_id r_mature_kd
    1 H
    1 T
    1 T
    2 T
    3 H
    4 S
    4 T
    4 T
    5 X
    6 H
    6 L
    6 L
    6 M
    please provide sql query for below expected output.
    expected output :
    finance_id r_mature_kd
    1 H
    1 T
    4 S
    4 T
    6 H
    6 L
    6 M
    for column finance_id: '1', contains three records, but two distinct r_mature_kd hence it should retrive only two records with H,T
    for column finance_id: '2','3', contains only one record hence this records should not retrive.
    for column finance_id: '6', contains four records, but three distinct r_mature_kd hence it should retrive only two records with H,L,M
    please help on this.

    WITH T(finance_id,r_mature_kd) AS (
    SELECT 1, 'H' FROM DUAL UNION ALL
    SELECT 1, 'T' FROM DUAL UNION ALL
    SELECT 1, 'T' FROM DUAL UNION ALL
    SELECT 2, 'T' FROM DUAL UNION ALL
    SELECT 3, 'H' FROM DUAL UNION ALL
    SELECT 4, 'S' FROM DUAL UNION ALL
    SELECT 4, 'T' FROM DUAL UNION ALL
    SELECT 4, 'T' FROM DUAL UNION ALL
    SELECT 5, 'X' FROM DUAL UNION ALL
    SELECT 6, 'H' FROM DUAL UNION ALL
    SELECT 6, 'L' FROM DUAL UNION ALL
    SELECT 6, 'L' FROM DUAL UNION ALL
    SELECT 6, 'M' FROM DUAL
    SELECT  DISTINCT finance_id,r_mature_kd,C FROM(
    SELECT finance_id,r_mature_kd,COUNT(1) OVER (PARTITION BY finance_id) C
    FROM T
    WHERE C > 1
    ORDER BY 1
    FINANCE_ID
    R_MATURE_KD
    C
    1
    H
    3
    1
    T
    3
    4
    S
    3
    4
    T
    3
    6
    H
    4
    6
    L
    4
    6
    M
    4
    Ramin Hashimzade

Maybe you are looking for