SQL Server 2008 to SQL Server 2012
My server crashed with SQL Server 2008 on it. I am replacing it with a new machine with SQL Server 2012. How do I restore my old SQL database to my new machine?
Have a look at using Restore Header Only to look at the contents of your backup to confirm its contents. (http://technet.microsoft.com/en-us/library/ms178536.aspx)
From this then look at the restore database here -
http://technet.microsoft.com/en-us/library/ms186858.aspx
From confirming the contents of your backup you will need to select the appropriate position number (from the restore header only) and link that with the File Number (from the restore)
Thanks
Warwick Rudd (MCM - SQL 2008 | MCT)
(SQL Masters Consulting |
My SQL Server Blog | Twitter)
Similar Messages
-
Unable to upgrade SQL Server 2008 R2 to SQL Server 2012 SP1
I'm encountering error after error, after successfully installing the upgrade advisor (which took some doing) and running it with essentially no warnings/errors (the one warning was on the connection strings, as I recall -- and all of the warnings had a
"fix after" status.
First failure involved SSRS and the inability to create the "managed account". Backed out the upgrade using http://sqldbanotes.blogspot.com/2013/10/how-to-fix-failed-in-place.html
Now the failure involves SSAS and unable to connect to analysis services with name MSSQLServerOLAPService. That is the logical name for the service, although it shows up as just MSSQLServer when looking at it in the services list. I tried
setting the service account to a local account as well as to Local System -- did not make a difference, the upgrade couldn't apparently find it regardless.
Has anybody successfully done an in place upgrade from SQL Server 2008 R2 to SQL Server 2012?Hi Bob,
Thanks for your post and I am glad to hear that the issue is resolved. Thanks for you posting a reply to share your solution and I had marked it as answer. That way, other community members could benefit from your sharing.
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support -
I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, ProgrammerHi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support -
Hi there;
I have a windows server 2008 SP2 (32bits) in which I have an instance of SQL Server
2008 and another of 2012.
My Windows server 2008 installed the following updates; (see below).
(KB2898858),(KB2909921),(KB890830),(KB2898869),(KB2911502),(KB2901126),
(KB2916036),(KB2862973),(KB2901113)
After the machine was re-started, I was not abble to connect
to the instance of SQL Server 2012. I am able
to connect to the instance of SQL Server 2008.
The error message I get when I atemp to connect can be found
at the end of the list of updates below.
Do I need to uninstall an update? if so, which one and how do I do that?
Thanks Gabriel I. Ruiz
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2898858)
Installation date: 2/12/2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898858
Cumulative Security Update for Internet Explorer 9 for Windows Server 2008 (KB2909921)
Installation date: 2/12/2014 11:42 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2909921
Windows Malicious Software Removal Tool - February 2014 (KB890830)
Installation date: 2/12/2014 11:41 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/890830
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista and Windows Server 2008 x86 (KB2898869)
Installation date: 2/12/2014 11:40 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2898869
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2911502)
Installation date: 2/12/2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2911502
Security Update for Microsoft .NET Framework 4.5.1 on Windows 7, Windows Vista, and Windows Server 2008 x86 (KB2901126)
Installation date: 2/12/2014 11:36 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901126
Security Update for Windows Server 2008 (KB2916036)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2916036
Security Update for Windows Server 2008 (KB2862973)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2862973
Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x86 (KB2901113)
Installation date: 2/12/2014 11:34 PM
Installation status: Successful
Update type: Important
More information:
http://support.microsoft.com/kb/2901113
===================================
Cannot connect to HAVANA\HAVANA_2012_1ST.
===================================
The client was unable to establish a connection because of an error during connection initialization process before login. Possible causes include the following: the client tried to connect to an unsupported version of SQL Server; the server was too busy
to accept new connections; or there was a resource limitation (insufficient memory or maximum allowed connections) on the server. (provider: Shared Memory Provider, error: 0 - No process is on the other end of the pipe.) (.Net SqlClient Data Provider)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=233&LinkId=20476
Server Name: HAVANA\HAVANA_2012_1ST
Error Number: 233
Severity: 20
State: 0
Program Location:
at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose)
at System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock)
at System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate)
at System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate)
at System.Data.SqlClient.TdsParser.SendPreLoginHandshake(Byte[] instanceName, Boolean encrypt)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover)
at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer
timeout)
at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance,
SqlConnectionString userConnectionOptions, SessionData reconnectSessionData)
at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection)
at System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions)
at System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry)
at System.Data.SqlClient.SqlConnection.Open()
at Microsoft.SqlServer.Management.SqlStudio.Explorer.ObjectExplorerService.ValidateConnection(UIConnectionInfo ci, IServerType server)
at Microsoft.SqlServer.Management.UI.ConnectionDlg.Connector.ConnectionThreadUser()
===================================
No process is on the other end of the pipeHi,
Check if SQL Server service is running fine. I doubt you may have changed the user account password used for SQL Server service. After restarting the machine, you also need to update the user account of SQL Server service in Configuration
Manager. Re-type the user account name and password under Log on tab and see how it helps.
Thanks.
Tracy Cai
TechNet Community Support -
I've been trying fresh installation of SQL Server 2008 R2 enterprise on Windows Server 2012 R2 standard VM server several times for two weeks, but always get the error "Attempted to perform an unauthorized operation". At first, I attempted
to install all features, but failed several times. So I decided to try install just Database Engine service, and still fail at the SqlBrowserConfigAction_Install_ConfigNonRC_Cpu32, with the error "Attempted to perform an unauthorized operation".
I remote login to server with my admin domain account. This account is in server local Administrators group. I
1. Right-click on setup.exe file | properties | Compatibility tab | select compatibility to Windows 8.Then click OK.
2. Right-click on setup.exe file | Run as Administrator, to start the Installation Center.
I have the document of my installation steps and zip file of the installation logs, if you need to take a look.
Appreciate for any help!
ntthHi ntth,
"Attempted to perform an unauthorized operation"
The above error is always related to the Windows account SID mapping. I recommend you login into Windows using another Windows account which has administrative privileges and run SQL Server setup using that Windows account.
Besides, please note that we need to apply SQL Server 2008 R2 Service Pack 2 or a later update when installing SQL Server Windows Server 2012 R2. For more information, please review this
KB article.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
SQL Server 2008 R2).
Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
Deprecated Database Features in SQL Server 2012
Deprecated SQL Server features in SQL Server 2012
After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
SQL Server 2012 DB Engine does not start (clean install with server 2012 and 2008 R2)
I'm trying to do clean installation of SQL server 2012 on Server 2012 (which is runnning as a VM on ESX server) and getting this "wait on the DB engine recovery failed" message. Initially, I though this issue was related to some permission issues
but changing the permission or service accounts didn't help. I'm not seeing any "denied" messages in the log files either. Even with Server 2008 R2 (clean built VM), the installation gives the exactly the same error messages.
My setup is purely for test purpose; so, the security is not a concern. Can someone help or give me a clue where to look?
(Summary)
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-28 17:12:12
End time: 2014-05-28 17:19:47
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: WIN-1V3VKPV5Q19
Machine processor count: 1
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
Installation location: E:\x64\setup\
Installation edition: Evaluation
Slipstream: True
SP Level 1
Patch Level: 11.1.3128.0
Product Update Status:
Success: KB 2674319, KB 2793634
Product Updates Selected for Installation:
Title: Service Pack 1
Knowledge Based Article: KB 2674319
Version: 11.1.3000.0
Architecture: x64
Language: 1033
Title: SQL Server 2012 SP1 GDR Product Update
Knowledge Based Article: KB 2793634
Version: 11.1.3128.0
Architecture: x64
Language: All
Update Source: MU
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: NT Service\SQLAgent$TESTDB
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Manual
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: <empty>
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: TESTDB
INSTANCENAME: TESTDB
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: <empty>
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT Service\MSSQL$TESTDB
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: WIN-1V3VKPV5Q19\Administrator
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: SQL Client Connectivity
Status: Passed
Feature: SQL Client Connectivity SDK
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140528_170909\SystemConfigurationCheck_Report.htm
(Error Log)
2014-05-28 17:17:26.64 spid8s 0 transactions rolled back in database 'msdb' (4:0). This is an informational message only. No user action is required.
2014-05-28 17:17:26.73 spid9s Starting up database 'model'.
2014-05-28 17:17:28.24 spid9s Error: 9004, Severity: 23, State: 6.
2014-05-28 17:17:28.24 spid9s An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.
2014-05-28 17:17:28.24 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
(Details)
(01) 2014-05-28 17:17:28 Slp: Exception type: Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException
(01) 2014-05-28 17:17:28 Slp: Message:
(01) 2014-05-28 17:17:28 Slp: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
(01) 2014-05-28 17:17:28 Slp: HResult : 0x851a001a
(01) 2014-05-28 17:17:28 Slp: FacilityCode : 1306 (51a)
(01) 2014-05-28 17:17:28 Slp: ErrorCode : 26 (001a)
(01) 2014-05-28 17:17:28 Slp: Data:
(01) 2014-05-28 17:17:28 Slp: SQL.Setup.FailureCategory = ConfigurationFailure
(01) 2014-05-28 17:17:28 Slp: WatsonConfigActionData = INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp: WatsonExceptionFeatureIdsActionData = System.String[]
(01) 2014-05-28 17:17:28 Slp: Stack:
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart(Process processSql)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceSCM.StartSqlServer(String[] parameters)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.ConfigSQLServerSystemDatabases(EffectiveProperties properties, Boolean isConfiguringTemplateDBs, Boolean useInstallInputs)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineDBStartConfig.DoCommonDBStartConfig(ConfigActionTiming timing)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
(01) 2014-05-28 17:17:28 Slp: at Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
(01) 2014-05-28 17:17:28 Slp: Watson Bucket 1
Original Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : Microsoft.SqlServer.Configuration.SqlEngine.SqlServerServiceBase.WaitSqlServerStart
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : Microsoft.SqlServer.Configuration.SqlEngine.SqlEngineConfigException@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : INSTALL@CONFIGRC@SQL_ENGINE_CORE_INST
(01) 2014-05-28 17:17:28 Slp:
Final Parameter Values
(01) 2014-05-28 17:17:28 Slp: Parameter 0 : SQL Server 2012@RTM@
(01) 2014-05-28 17:17:28 Slp: Parameter 1 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 2 : 0xD15B4EB2
(01) 2014-05-28 17:17:28 Slp: Parameter 3 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 4 : 0x4BDAF9BA@1306@26
(01) 2014-05-28 17:17:28 Slp: Parameter 5 : SqlEngineDBStartConfigAction_install_configrc
(01) 2014-05-28 17:17:28 Slp: Parameter 6 : 0x9C5770A6Hi Nababoya:
As you are telling this is a test installation process...
In the logs i m seeing the error message "An error occurred while processing the log for database 'model'. If possible, restore from backup. If a backup is not available, it might be necessary to rebuild the log.".
1) If the SQL Services was installed successfully and SQL Service was not able to start because of model database issue...
1.1) If you have model database SQL back file, start the SQL Server in single user mode with minimum configuration and try to restore MODEL database
http://blogs.msdn.com/b/sqlserverfaq/archive/2011/05/11/inf-hey-my-sql-server-service-is-not-starting-what-do-i-do.aspx
1.2) If you don't have backups., try to rebuild the system databases but make sure that you are not losing any data critical data on master and SQL Jobs on MSDB
http://msdn.microsoft.com/en-us/library/dd207003%28v=sql.110%29.aspx#RebuildProcedure
2) As if this is a new installation try to repair the instance with the help of setup media file
3) If the repair option fails., the last option wipe out the complete SQL Server components from Services.msc and Registries and start new installation.
4) Make sure when you are doing un-installation all the required SQL Server components on services.msc should be in stop state.
Hope this helps and let me know any questions...
Thanks,
Thanks, Satish Kumar. Please mark as this post as answered if my anser helps you to resolves your issue :) -
Install SQL Server 2008 R2 SP 1 on Windows Server 2012
Dear All,
I've downloaded SQL Server SP1 from this link:
http://www.microsoft.com/en-us/download/details.aspx?id=26727
I downloaded :
SQLServer2008R2SP1-KB2528583-x64-ENU.exe
SQLManagementStudio_x64_ENU.exe
SQLServer2008R2SP1-KB2528583-IA64-ENU.exe
when i run SQLServer2008R2SP1-KB2528583-x64-ENU.exe i have error:
There are no SQL Server instances or shared features that can be updated on this computer
what that i missed? is that i must install SQL Server 2008 R2?
because if i run the SQL Server 2008 R2 there are compatible issue. I run this on Windows Server 2012
Please Help.
Best regards,
SurbaktiHi,
The cause could be an invalid entry in the userSettings section of the Microsoft.SqlServer.Configuration.LandingPage.Properties.Settings file.
Delete this configuartion file or delete the folder "Microsoft_Corporation" and see how it works.
Run the command: rd /s /q %localappdata%\Microsoft_Corporation
For your reference:
http://blogs.msdn.com/b/smondal/archive/2013/07/26/an-error-occurred-creating-the-configuration-section-handler-for-usersettings-microsoft-sqlserver-configuration-landingpage-properties-settings.aspx
Thanks.
Tracy Cai
TechNet Community Support -
SQL Server 2008 R2 & 2008 R2 SP1 installation fails in Windows server 2012
Hi All,
I have a strange issue here. I have a Windows server 2012 VM where i want to deploy SQL 2008 R2 Enterprise edition.
When i Run the setup every thing goes fine and during the installation wizard i get this error " The Folder path Program files contains invalid characteristics. I get this error 3 - 4 times during the installation wizard and the installation fails.
Below is the screenshot for the same.
So i checked few articles regarding the compatibility issue and found the below article and upgraded my setup to SQL 2008 R2 SP1 using the below article.
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Again i still see the same above errors and with that a new error related to a MOF File.
Below are the contents of the error logs. Can some one assist on this issue.
======================================================
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 13:53:03
End time: 2015-01-15 14:04:29
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0xA60E3551%400xD3BEBD98%401211%401
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: D:\SQLServer2008R2_SP1\x64\setup\
Installation edition: ENTERPRISE
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: E2KLAB\SCOMAC
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Automatic
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: D:\SQLServer2008R2_SP1\SP
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: E2KLAB\SCOMAC
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: E2KLAB\SCOMAC
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr,E2KLAB\SCOMAC,E2KLAB\SCOM Admins
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\sql_common_core_loc_Cpu64_1033_1.log
MSI error description: The folder path 'Program Files' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_135043\SystemConfigurationCheck_Report.htm
Gautam.75801Hi Alberto,
Still the same issue.
I installed the SQL 2008 R2 without SP1 and changed the service accounts to system account and repaired the .NET using the .NET Repair tool
Also changed the installation directory to D:\ Drive this time. Still same issue.
log file:
===============
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Exit code (Decimal): -2068052692
Exit facility code: 1212
Exit error code: 1324
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then rerun SQL Server Setup.
Start time: 2015-01-15 22:55:37
End time: 2015-01-15 23:07:32
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SQLSysClrTypes_Cpu64_1.log
Exception help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=10.50.2500.0
Machine Properties:
Machine name: ALPCLDSCOM01
Machine processor count: 4
OS version: Future Windows Version
OS service pack:
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
SPLevel: 1
Installation location: D:\SQL Server 2008 R2 Datacenter edition for only Windows server 2008 R2\x64\setup\
Installation edition: ENTERPRISE
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: False
AGTSVCACCOUNT: NT AUTHORITY\SYSTEM
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
CUSOURCE:
ENABLERANU: False
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,FULLTEXT,RS,SSMS,ADV_SSMS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: D:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: D:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: D:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE:
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\SYSTEM
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\SYSTEM
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: E2KLAB\Gautamr
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 1
UIMODE: Normal
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Complete
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Passed
Feature: Management Tools - Basic
Status: Failed: see logs for details
MSI status: Failed: see details below
MSI error code: 1324
MSI log file location: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\BestPracticesPolicies_Cpu32_1.log
MSI error description: The folder path 'Program Files (x86)' contains an invalid character.
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20150115_225416\SystemConfigurationCheck_Report.htm
Any other suggestion i can try ?
Gautam.75801 -
Install SQL Server 2008 R2 in Windows Server 2012 using SQL4SAP Script
Hi guys,
Since we are performing a SAP System Migration from older releases of Windows/SQL Server, as detailed on SAP Note
1780433 - System copy of SAP systems on Windows 2012 : SQL Server
We need to install SQL Server 2008 R2 before upgrading the system
When running SQL4SAP Script it states the following
17/03/2014 08:13:44 p.m.
Message Box "Windows version error"
OS Family "WindowsNT6.3" is not supported by this script.
Result: vbOK
On Windows 2012 should i run the SETUP instead the script?
Thanks!Hi Sunny
Im following SAP Note 1780433 - System copy of SAP systems on Windows 2012 : SQL Server
in order to migrate a SAP 640 system from Windows 2003/SQL Server 2005 to Windows 2012/ SQL Server 2012
Reason and Prerequisites
This note describes how to migrate the mentioned SAP products to Windows 2012/SQL Server 2008 R2,
in order to prepare an upgrade to SAP releases based on NW 7.0 and higher.
Note, that only SAP upgrade paths are supported, that are supported by the SUM tool. For more
information about the upgrade paths supported by SUM, read the Central SUM Note referred to at
http://www.service.sap.com/SLToolset.
Immediately after the SAP upgrade, your database has to be upgraded to SQL Server 2012. SAP does in general not support SQL Server releases prior to SQL Server 2012 on Windows 2012.
I understand this is not supported from Productive system, we are performing this on a Development system for test purposes.
Nevertheless on the note says Install First SQL Server 2008 R2 and after SAP upgrade, perform upgrade of SQL Server Upgrade, so there is misleasing information.
Im not sure if a 640 System would be able to copied and upgraded in Windows 2012/SQL Server 2012
It doesnt mention that 640_EX2 Kernel Support SQL Server 2012 to install the system.
How would yo recommend a system copy restoring database on these conditions?
640 System (SQL Server 2005,Win 2003) --> 640 System (SQL Server 2012, Win 2012)
(and then Upgrading to 740)
Thanks -
I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?I read this kb - http://support.microsoft.com/kb/2681562/en-us, but doesn't get exact answer.
I need to install vWorkspace 8 on server w2k12. It install SQL Server 2008 Express during installation and I got error.
So, is it possible to install Microsoft SQL Server 2008 (R2) Express on windows server 2012 (not R2) ?
Yes you can install SQL server 2008 express on windows 2012 OS see below link
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.100).aspx#Express32
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
How to change backend databases sql server 2008 R2 to Sql server 2012 datacenter
Hi
i have current sharepoint 2010 form has backend database is sql server 2008 R2 on windows server 2008 R2 Enterprise
and this form has
1 application server
1 Search server (index server)
1 wfe server ( all web applications are running)
1 databse server
here how i change this form back end to new windows server 2012 and sql server 2012 datacenter
adilInformation on SQL Aliases (using cliconfg.exe):
http://sqlandme.com/2011/05/05/create-sql-server-alias-cliconfg-exe/
You need to migrate content back into the database prior to migration:
http://technet.microsoft.com/en-us/library/ff628255(v=office.14).aspx
http://technet.microsoft.com/en-us/library/ff628257(v=office.14).aspx
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Will the reports developed in sql server 2008 r2 BIDS work when deployed on sql server 2012 reporting manager?
when I check on Microsoft site it says
Reports are not upgraded when you upload a report definition file directly to the report server
or SharePoint site. Upgrading a report definition in SQL Server Data Tools is the only way to upgrade the .rdl file.
When you open an .rdl file in Report Designer in SQL Server Data Tools (SSDT), if the report was
created for a previous namespace, Report Designer automatically creates a backup file and upgrades the report to the current namespace.
This is the only way you can upgrade a report definition file.
Now here is another confusing statement which says
You can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server
2012 report server and it is automatically upgraded on first use. The report server stores the report definition file in the original format. The report is automatically upgraded the first time it is viewed, but the stored report definition file remains
unchanged.
All I want to know is if I deploy a rdl made in 2008 r2 to 2012 will it work on the report manager of
2012?
<o:p>
</o:p>
MudassarI have tested this fucntionality and can confirm that ssrs 2008 r2 reports work when you deploy them on new ssrs 2012 report manager .
No Migration is required .
I didnt even moved report server dbs .All I did is just deployed reports on the report manager and it worked .
"You
can upload an .rdl file created in an earlier version of Reporting Services to a SQL Server 2012 report server and it is automatically upgraded on first use. "
Microsoft needs to correct this the documentation is misleading
Mudassar -
Hi
I'm working on upgrading sharepoint 2010 to sharepoint 2013 with sql server 2008 r2. I've ran into some problems but have been able to get a test farm upgraded. However to run SSRS 2013 it seems Sql Server 2012 Reporting Services are required. Upgrading
to a full sql server 2012 database isn't an option. I know that sql server 2012 reporting services can use sql server 2008 r2 as a catalog and content database so I was wondering could this be a workaround? Importantly would I need a separate machine/virtual
machine to host sql server 2012 reporting services? or could it live on the sql server 2008 r2 machine? Any pointers appreciated. Thanks DanRemember that SSRS must be deployed on the SharePoint server. Having said that, yes you can install SSRS 2012 SP1 on a server running SQL 2008 R2. And yes, you can use 2008 R2 as your Database Engine server while SSRS 2012 SP1 runs on the SharePoint server.
Trevor Seward
Follow or contact me at...
  
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs. -
Difference between SQL SERVER 2008 & SQL SERVER 2012 & SQL SERVER 2014
Difference between SQL SERVER 2008 & SQL SERVER 2012 & SQL SERVER 2014 ?
What sort of databases do you have OLTP? Data warehouse? What requirements do you have for High Availability?
The main features for SQL 2012/2014, as I see it:
o Support for window functions, which makes it possible to write fast queries for running totals, sliding windows etc.
o Columnstore indexes, which can speed up your data warehouse enormously. But of no interest for OLTP. Only writable in SQL 2014.
o AlwaysOn and Availability Groups, a vastly improve story for high availability and disaster recovery.
o try_convert/try_cast, you can now easily filter out values from a column which does not convert to a number. A small but essential feature.
o In memory-OLTP, a new in-memory engine in SQL 2014. This far with very limited feature set, and quite specialised.
Of the points above, the second and third require Enterprise Edition, the first and fourth are in all editions. For the last, I don't think Microsoft has announced anything yet.
There are also new stuff in the BI area, but that's out of my league.
And, oh, there is a new licensing model - which I think is holding more than one customer back.
Erland Sommarskog, SQL Server MVP, [email protected] -
Can't restore SQL 2005 BAK to SQL 2008 R2 running on Server 2012
Hi there,
Preparing to switch from SQL 2005/Server 2003 to SQL 2008 R2 / Server 2012. Took a backup of the SQL database on 2005 (stored at a cloud backup provider nightly) and copied to the new machine. Unable to restore the .BAK file, with the error:
The media family on device <backup path> is incorrectly formed. SQL Server cannot process this media family.
RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3241)
Tried it with two different backup files from two different nights, same error. I understand that this error can show up when restoring to a lower version of SQL, but that's not the case here.
Also, I know this can occur if the BAK file is corrupt, and I can't verify that yet, but two in a row failed. I'm hoping our cloud solution isn't part of the problem somehow.
BAK file is 15 Gb in size, so don't have the ability to attempt the restore on the 2005 production server. Just not enough room, and can't afford to cause performance issues on that box anyway.
Anyone know of any way to get a better handle on what's going on, or, even better, how to resolve it?
Thanks
RobinHello,
Since you are using a cloud solution, maybe the following article applies in your scenario.
http://www.sqlcoffee.com/Troubleshooting047.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com
Maybe you are looking for
-
Every time I try to get to a bookmarked page it says server error, how can I fix this?
I try logging in to a bookmarked page and I keep getting "server error" web configuration problems. How do I get to bookmarked page without this problem?
-
Exporting to swf file targeted to Flash Player version 9
I am trying to create a swf file targetted to version 9 of Flash Player, but when I export to the swf format from InDesign CS5, there doesn't seem to be an option to change the targeted version, and I get files targetted to version 10 instead. I need
-
Can anyone help me cut a word into an image?
I believe it is called merge?? I am new to illustrator and am working on learning new tricks, I have come to a road block here. Here is a set up: I have font image with a tail connected to the font, Inside the tail i have another font that i want
-
Copying Notes/Attachments from SO to PO
Hi Is there any standard functionality in Oracle which will copy the attachments/notes entered at SO Header and Line to the PR/PO created in Back 2 Back Order / Drop Ship Order Scenario . We are on 11.5.10.2 Thanks
-
Curve 9360 searching network error all the time
Hi there this is my second 9360 with the same problem alway searching for network got this replacement from blackberry a few weeks ago after the other one did the same thing and now same problem again does any one know whats causing this