SQL Server 2008 Windows Authentication

Hi Team,
I am using SQL Instance and Window Authentication in this case it is taking user name as my local domain\username.
But the instace is of different domain which I want to access and want to change that domain name and user name.
Can I change it If yes how I can able to change it..Pl help me .
Yogesh Rawat

Hi Yogesh,
According to your description, you are going to connet to a SQL Server instance that in another domain using Windows authentication, right?
Generally, there are two approaches commonly used to get around this problem, adding your machine to the remote domain, or making your local domain trusted. For the details, please refer to the link below.
http://www.mssqltips.com/sqlservertip/3250/connect-to-sql-servers-in-another-domain-using-windows-authentication/
Regards,
Charlie Liao
TechNet Community Support

Similar Messages

Attempted to perform an unauthorized operation sql server 2008 ( Windows 7 )

Dear All,
I am facing following error Sql 2008 setup "Attempted to perform an unauthorized operation sql server 2008 ( Windows 7 )"
I tryed to run setup as administrator
I tryed to run setup to create new user as an administrator and login in new user then run setup
I tryed to run in compatible mode windows xp sp3.
I tryed to login in Administrato account and run setup
in this all time same error came i am tired too much. because of this i format my pc and install windows 7 but still it is same please help me.
Thanks is advance
Regards
Uday
[email protected]

Hi,
Can you locate summary.txt file and details.txt file from location
C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log
Upload these to files on some shared location like dropbox, onedrive etc and post link here I would analyze and see where actually problem is coming.
This link would also help you in searching log files.
PS: Dont reply to duplicate thread you posted
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

JDBC Connectivity for SQL Server 2005 Windows Authentication Mode

Hi Everyone,
In my Scenario we are using SQL Server 2005 with Mixed Mode Authentication. Now we are planning to move only with Windows Authentication Mode.
We have configured DB with Window authentication mode & user id have been configured in PI channels however we are getting error. We checked microsoft site, which says Windows Authentication mode DB can not be connected using JDBC drivers.
http://support.microsoft.com/kb/313100
In this above link see Basic Connectivity Troubleshooting Section.
Please let me know if someone confirued JDBC Channel Successfuly with Windows Authentication Mode.
Thanks In Advance
Regards,
Bharathi.

I think this issue is related to the way that Vista, Windows 7 and Windows 2008 / 2008 R2 treat users who are logged on to the system with an account that is a member of the local administrators group when SQL is running locally.
If your SQL setup has left you with BUILTIN\Administrators being a member of the sysadmin server role and you start up SQL Management Studio you'd expect to be mapped to the sysadmin role if your user account is in the local administrators group, however
these OS disable this ability and when you try to connect to the database engine SQL server doesn't know you are a member of the local administrators group.
To get round this, close all your open SQL management studio windows and then start a new window by right clicking the icon in the start menu and chosing to run as administrator. This time when you try to connect to the SQL database engine, windows doesn't
"hide" the fact that you are an administrator. If you need to do this a lot you can go to the compatibility tab on the properties of the shortcut and set it to always run as administrator.
Alternatively you can install the admin tools remotely and you don't get this effect.
Tim

How to Configure Remote Connections To SQL Server 2008 R2 Express

Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!

My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
            // netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
            // netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo

Sa's password in SQL Server 2008 R2 Express

Hi,
In the SQL Server 2005 Express I can chose the expert mode during the installation. This enables me to set the password of the user “sa”.
Now I tried to install SQL Server 2008 R2 Express but I had no possibility to change / set the password of the user “sa”.
I read in the internet that the default-password of the user “sa” should be a blank password. Since in SQL Server 2008 R2 Express there was no way to set / change “sa”’s password I tried to login with a blank password. But this
also didn’t worked.
So my questions are:
1.    Where during the SQL Server 2008 R2 Express setup can I set / change the “sa”’s password.
2.    Where in the SQL Server 2008 R2 Express can I set / change the “sa”’s password after the installation.
3.    What’s the default password of “sa” in SQL Server 2008 R2 Express?
4.    Why a blank password for the unmodified “sa” account didn’t worked?
Thank in advance for all your helpful answers.

I am not sure whether you found a solution for sa password reset in 2k8 express. May be useful to others.
Steps to reset the password:
1. Go to SQL Server Properties/Security tab and change the mode to SQL Server authentication mode
2. Go to security/logins, open SA login properties
a. Uncheck "Enforce password policy" and "Enforce password expiration" check box there if you decide
to use weak password
b. Assign password to SA user
3. In SQL 2k8, we may get the following error when we reset the password,
"Cannot set a credential for principal 'sa' . (Microsoft SQL Server, Error: 15535)"
Resolution:
but this can be fixed by selecting the "Map To Credential" check box on the General tab of the Login
Properties - sa dialog box.
4. You may get the following error after above step,
“User is not associated with a trusted sql server connection"
Resolution:
In SQL Server Management Studio, Right-click the Server name, select Properties > Security
Under Server Authentication, select SQL Server and Windows Authentication Mode
The server must be stopped and re-started before this will take effect.
5. Make sure the sa (at status tab of sa properties) is enabled after restart the server.
It works =)!!!!!!!!! Thanks man =)

Connet sql server 2008 to java with sqljdbc

I'm trying to connect sql server 2008 with java and I tired to read from microsft documentation and other internet sites to do it and always get an mistake. I used sqljdb, sqljdb4, sqljdb4.1 and any
the most simple codec is:
public static void main(String[] args) throws SQLException{
        try {
            String connectionUrl = "jdbc:sqlserver://localhost.\\SQLEXPRESS:1433;" +
            "databaseName=hackeadorazodb;user=hacker;password=;integratedSecurity=true";
            Connection con = DriverManager.getConnection(connectionUrl);
            if(con != null){
                System.out.println("exito");
        } catch (Exception e) {
            System.out.println("error: "+e.toString());


Hi hackeadorazo,
Could you please post the full error message?
From your description, it seems that you are connecting to a named SQL Server instance locally.
Firstly, please make sure the following things.
    1. SQL Server is running in SQL Server Configuration Manager (SSCM)
    2. TCP/IP is enabled in SSCM.
    3. SQL Server is listening on port 1433. Right-click "TCP/IP" in SSCM > SQL Server Network Configuration > Protocols for SQLEXPRESS, then choose "Properties" and click "IP Addresses" tab, you
can check the port from “IPAll/TCP Port”.
Secondly, if you use current Windows user account (Windows authentication) to log on SQL Server, the
connection URL should be as follows.
String connectionUrl = "jdbc:sqlserver://localhost\\SQLEXPRESS:1433;" + "databaseName=hackeadorazodb;integratedSecurity=true";
If you use a SQL Server account (SQL Server authentication) to
log on SQL Server. You need to specify username and password in the
connection URL as follows. In addition, please make sure that SQL Server is configured as “SQL Server and Windows Authentication Mode “in SQL Server Management Studio (SSMS) and the login ‘hacker’ exists in SQL Server Instance>Security>Login.
String connectionUrl = "jdbc:sqlserver://localhost\\SQLEXPRESS:1433;" + "databaseName=hackeadorazodb;user=hacker;password=<Password>";
For more details, you can review the following blogs.
http://blogs.msdn.com/b/brian_swan/archive/2011/03/02/getting-started-with-the-sql-server-jdbc-driver.aspx
http://www.codejava.net/java-se/jdbc/connect-to-microsoft-sql-server-via-jdbc
Thanks,
Lydia Zhang

Using SQL Server in Window Authentification mode from Coldfusion

I've received the following private message and don't know
how to answer. Can anyone else help?
quote:
Is there any some simple way to use the sql server in windows
authentication mode from coldfusion??? Other the creating the ODBC
Socket.

Hi Colum,
get these quite often, which is why I turn PM off most of the
time.
Just send them to the right forum:
http://www.adobe.com/cfusion/webforums/forum/index.cfm?forumid=1
Cheers
Craig

How to resolve a windows authenticated orphaned user in Sql Server 2008 R2?

Hi,
We have some orphaned windows authenticated users(domain) in the database while it had been
migrated from Sql Server 2005 to Sql Server 2008 R2, because there are no corresponding
logins for the users. Will just adding the logins would be sufficient or after adding the
logins should we also run sp_change_users_login @Action='update_one' to resolve any sid
conflict. Thanking you in advance,
With regards
Binny Mathew

Binny
You have issue with orphaned users if you use Mixed Authentication. If you use Windows and move the db to the new server the Windows Login should be exist on the new server already.
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

Error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication" on SQL Server 2008 R2 Enterprise Edition 64-bit SP2 clustered instance

Hi there,
I have a Windows 2008 R2 Enterprise x64 SP2 cluster which has 2 SQL Server 2008 R2 Enterprise Edition x64 SP2
instances.
A domain account "Domain\Login" is administrator on both physcial nodes and "sysadmin" on both SQL Server instances.
Currently both instances are running on same node.
While logging on to SQL Server instance 2 thru "Domain\Login" using "IP2,port2", I get error 18452 "Login failed. The login is from an untrusted domain and cannot be used with Windows authentication". This happened in the past
as well but issue resolved post insatllation of SQL Server 2008R2 SP2. This has re-occurred now. But it connects using 'SQLVirtual2\Instance2' without issue.
Same login with same rights is able to access Instance 1 on both 'SQLVirtual1\Instance1' and "IP1,port1" without any issue.
Please help resolve the issue.
Thanks,
AY

Hello,
I Confirm that I encountred the same problem when the first domain controller was dow !!
During a restarting of the first domain controller, i tried to failover my SQL Server instance to a second node, after that I will be able to authenticate SQL Server Login but Windows Login returns Error 18452 !
When the firts DC restart finishied restarting every thing was Ok !
The Question here : Why the cluster instance does'nt used the second DC ???
Best Regards
J.K

How to install SQL server 2008 express on Windows server 2008 R2 standard OS

Hi,
I have Windows server 2008 R2 Standard edition (64-bit) and trying to install SQL server 2008 express edition since I do not have SQL server 2008. When I install it I am unable to see Management Studio so I am trying to install management studio as well
but still I am facing issue. Please let me know whether SQL server 2008 express edition is compatible with Windows server 2008 R2 Standard. If not then pls let me know the proper steps to install it.
Regds

Hello,
Service Pack 1 for SQL Server 2008 is required to be compatible with Windows Server 2008 R2.
Please download QL Server 2008 Express with SP1 included from the following link:
http://www.microsoft.com/en-us/download/details.aspx?id=25052
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Unable to install SQL server 2008 r2 standard edition on windows server 2008 r2 sp1

I am unable to install sql server 2008 r2 standard edition on windows server 2008 r2 sp1.
On the Setup Support Files page, choose Install this step I don't get any other window i.e. nothing happens I waited for 5-10 min. Then I checked the log file.
Final result:                  Failed: see details below
Exit code (Decimal):           -2068053929
Exit facility code:            1212
Exit error code:               87
Exit message:                  Failed: see details below
Start time:                    2014-03-18 14:59:31
End time:                      2014-03-18 15:00:25
=== Verbose logging started: 3/19/2014 9:45:47 Build type: SHIP UNICODE 5.00.7601.00 Calling process: E:\SQL Server 2008 R2 Standard\x64\setup100.exe ===
MSI (c) (10:34) [09:45:47:496]: Note: 1: 2203 2: E:\SQL Server 2008 R2 Standard\x64\redist\watson\dw20sharedamd64.msi 3: -2147287038
MSI (c) (10:34) [09:45:47:496]: MsiOpenPackageEx is returning 2.
=== Verbose logging stopped: 3/19/2014 9:45:47 ===
Please help As i am running out of time as i have to upgrade TFS for that first step is to install SQL server.

Hello,
The following are a few things you can try:
Copy the media to the local disk drive, unzip it (in case you are installing from an ISO file, and run SQL Server setup from there.
Try to unregister and register the Windows Installer with the following two commands:
msiexec /unregister
msiexec /regserver
Try to use Process Monitor to log the detailed error produced when the installation of dw20sharedamd64.msi fails. You can download Process Monitor from the following link:
http://technet.microsoft.com/en-us/sysinternals/bb896645
Share with us the error captured by Process Monitor.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

CRM 7.0 installation failed on Windows 2008 R2 SQL Server 2008 SP1

Hello I'm currently trying to install CRM 7.0 on a windows 2008 R2 (64B) plateform with SQL Server 2008 SP1 as database engine
while launching sapinst.exe i'm facing this issue that i cannot get rid of it
Could someone Help , would really be appreciated as i'm a newby on SAP world
thanks a lot
Unable to start a service execution. Please check the following information for the possibble reason and inform the installation development : Opened sylib701_1.dll exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Opened C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iaguieng701_1.dll receiving and sending on port 21200 Environment variable SAPINST_JRE_HOME set to value 'C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/jre'. exe dir is C:/Users/SAPINS1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Opened C:/Users/SAPINS~1/AppData/Local/Temp/2/sapinst_exe.3492.1286357336/iakdblib701_1.dll This is SAPinst, version 701_1, make variant 701_REL, build 1015514 compiled on Oct 3 2008, 01:51:15 MessageLib initialized successfully. showing dlg diProductChoice <dialog sid="diProductChoice"> <title>Welcome to SAP Installation Master</title> <dialog/> Login in progress Connection request to guiengine backend by host 169.254.138.68 Protocol version is 3.1 Send connect information client logged on Waiting for an answer from GUI CDialogHandler: ACTION_NEXT requested <dialog sid="diProductChoice"> <dialog/> Creating file C:\Windows\System32\x. Removing file C:\Windows\System32\x. showing dlg diRestartOrCancel <dialog sid="diRestartOrCancel"> Dialog does not contain standard input handler, so the backend is not able to generate a log entry <dialog/> Waiting for an answer from GUI current working directory is C:/Windows/System32 Creating file C:\Program Files\sapinst_instdir\x. Removing file C:\Program Files\sapinst_instdir\x. Unable to open URL file://C:\Windows\System32\control.xml. The execution will be terminated now.

Hi!
Windows 2008 R2 is not yet listed in the PAM - and hence not yet supported. The technical prerequisites are met (with a special kernel patch) but not all software is released, so you may get it to run technically but not everything is tested and so, you should not install any SAP system on it!
In fact, and just to provide you further details it is not possible to expect the 710 products released for Windows Server 2008 R2 before around four weeks; 700 products will be released even after 710.
See [SAP note 1383873|https://service.sap.com/sap/support/notes/1383873] ("Windows Server 2008 R2 Support").
You can be always up to date with the latest Windows news at:
[SAP on Microsoft Windows|SAP on Microsoft Windows] --> Support of Microsoft Windows Server 2008 R2
Cheers!

MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition

Hello Team,
Is there any issue/conflicts/limitationn to install MS SQL Server 2008 R2 Enterprise Edition on Windows Server 2008 R2 Standard Edition.
OR their is nothing to worry about it I guess their is memory limitation between both of them. Please suggest
Regards
Naveed Amir

Hi,
Here you can find the officially Hardware and Software Requirements for SQL Server 2008 R2:
http://msdn.microsoft.com/en-us/library/ms143506(v=sql.105).aspx
There should be NO problem as much as I know if the basic limitation fit you (as shanky mentioned).
I had (an clients still have) several servers with Windows Server 2008 R2 Standard & SQL
Server 2008 R2 Enterprise and Standard with no problem (today I have one old developing server with this exact installations work great for several years).
[Personal Site] [Blog] [Facebook]

SQL Server 2008 R2 on Windows 2012 R2

It appears I cannot install SS2008 R2 on WS2012 R2. I get the following:
'Your version of Microsoft SQL Server (2008 and 2008 R2) isn't compatible with this version of Windows.'
Can someone please confirm this and when this issue might be resolved?

Hello,
Please try a slipstream installation of SQL Server 2008 R2 + SP2 using the following article:
http://blogs.msdn.com/b/petersad/archive/2011/07/13/how-to-slipstream-sql-server-2008-r2-and-a-sql-server-2008-r2-service-pack-1-sp1.aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

How to access the datasource window in SSRS for sql server 2008 R2 for writing my query without having to go through the wizard?

I have used SSRS a lot years ago with Sql Server 2000 and Sql Server 2005. I have written external assemblies, ... But now I have to do this with Sql Server 2008 (R2 -- which I realize I am way behind the times already but ...) in sql server 2000 and
2005 there was a tab for datasource to the left of the tab for design which was to the left of the preview tab. How do I get to the datasource window in sql server 2008 (r2) ?
I see that datasource explorer. But where can I get to the datasource window to edit my queries and so forth for sql server 2008 (R2)?
Thanks
Rich P

I think I found the answer to my question --- just right-click on the the Data Sources or Datasets for editing connections and dataset queries. I'm guessing it gets even fancier with Sql Svr 2012 - 2014. Man, that's the one thing
about coding platforms -- you let it go for a few years and come back, and everything has changed (well, a lot of things). Now I need to figure out how to add an external assembly to SSRS 2008 (R2).
Rich P

SQL Server 2008 Windows Authentication

Similar Messages

Maybe you are looking for