SQL Server 2012 Physical vs. Hyper-V Same Query Different Results

I have a database that is on physical hardware (16 CPU's, 32GB Ram).
I have a copy of the database that was attached to a virtual Hyper-V server (16 CPU's, 32GB Ram).
Both Servers and SQL Servers are identical OS=2008R2 Standard, SQL Server 2012R2 Standard same patch level SP1 CU8.
Same query run on both servers return same data set, but the time is much different 26 Sec on Physical, 5 minutes on virtual.
Statistics are identical on both databases, query execution plane is identical on both queries.
Indices are identical on both databases.
When I use set statistics IO, I get different results between the two servers.
One table in particular (366k rows) on physical shows logical reads of 15400, on Hyper-V reports logical reads of 418,000,000 that is four hundred eighteen million for the same table.
When the query is run on the physical it uses no CPU, when run on the Hyper-V it takes 100% of all 16 processors.
I have experimented with Maxdop and it does exactly what it should by limiting processors but it doesn't fix the issue.

A massive difference in logical reads usually hints at differences in the query plan.
When you compare query plans, it is essential that you look at actual query plans.
Please note that if your server / Hyper-V supports parallelism (which is almost always nowadays), then you are likely to have two query plans: a parallel and a serial query plan. Of course the actual query plan will make clear which one is used in which
case.
To say this again, this is by far the most likely reason for your problem.
There are other (unlikely) reasons that could be the case here:
runaway parallel threads or other bugs in the optimizer or engine. Make sure you have installed the latest service pack
Maybe the slow server (Hyper-V) has extreme fragmentation in the relevant tables
As mentioned by Erland, you have much much more information about the query and query plan than we do. You already know whether or not parallelism is used, how many threads are being used in it, if you have no, one or several Loop Joins in the query (my
bet is on at least one, possibly more), etc. etc.
With the limited information you can share (or choose to share), involving PSS is probably your best course of action.
Gert-Jan

Similar Messages

SQL Server 2012 Time(7) DataType values Comparison giving wrong result. Please help

We have a Table with StartTime and EndTime columns in Time(7) datatype, so we want to count the rows for each hour from 6 AM to 5 AM. If a record in table is as StartTime= 7 PM to EndTime = 5 AM (a shift of an employee) then the result is wrong beacause
being time(7) datatype the EndTime(5AM)< StartTime(7PM) in 24 hours format so following query gives wrong results.
select
* from EmpSchedule
where (StartTime>='19:00:00.0000000'
OR EndTime>='19:00:00.0000000')
Please help me out. Thanks

DECLARE @clockIns TABLE (employeeID INT, startDateTime DATETIME, endDateTime DATETIME)
INSERT INTO @clockIns (employeeID, startDateTime, endDateTime)
VALUES
(1, '2014-07-01 19:01:00.000', '2014-07-02 04:27:00.000'),
(2, '2014-07-01 18:01:00.000', '2014-07-02 05:27:00.000'),
(3, '2014-07-01 19:01:00.000', '2014-07-02 05:27:00.000'),
(4, '2014-07-01 18:01:00.000', '2014-07-02 04:27:00.000')
SELECT *
FROM @clockIns
WHERE datepart(HOUR,startDateTime) BETWEEN 19 AND 23
OR datepart(HOUR,startDateTime) BETWEEN 0 AND 4
OR datepart(HOUR,endDateTime) BETWEEN 19 AND 23
OR datepart(HOUR,endDateTime) BETWEEN 0 AND 4
Try this out.

Same query, different results depending on compute statistics!!!

This one is really weird, you would think I am making this up but I am not...
We have one really long query that uses several large inline views and usually returns a few rows. All of a sudden the query stopped working -- i.e. it returned no rows. We tried rebuilding indexes; this didn't help. We tried computing full statistics and this fixed the problem. Has anyone heard of compute statistics affecting the output of a query????
About a week later, the problem happened again. Computing estimate statistics didn't help. Only computing full statistics fixed the problem.
The only thing I can note, is that this database was recently upgraded from 9.2.0.6 to 9.2.0.7, but I checked the install log files and there are no errors.
Luckily this is just a development database but we are a little worried that it might re-occur in production. We have a few other development databases that have also been upgraded to 9.2.0.7 and none of these have the problem.
We have compared the init.ora files, no real differences. Any other ideas? Maybe a full export import?

Thanks, will do, but I am a little doubtful it is
fixed by 9.2.0.8 because it works on one of our
9.2.0.7 environments... Although if it is a statistics issue, it's likely a corner case, so you have to have a number of things in alignment. It's quite possible that, for example, two systems have identical structures and identical data but slightly different query plans because the data in one table is physically ordered differently on one system than in another which slightly changes the clustering_factor of an index which causes the CBO to use that index on one system and not on another. You may also end up with slightly different statistics because you have histograms on a column in one system and not in another.
Looks like we are going to 9.2.0.8 anyway because of
the end-of-life service support forcing us to go to
9.2.0.8 anyway.If it reproduces on 9.2.0.8 (and I'd tend to suspect it will), it's certainly worth raising an issue. Unless you have an extended support contract, though, I wouldn't hold out a lot of hope for a patch if this isn't already fixed, since 9.2 leaves Premier Support at the end of the month...
Justin

Is a Full Text Index search case sensitive or not in SQL Server 2012?

I setup full text index on my contact table and am attempting to run a search on it using the following query:
SELECT *
FROM sysdba.Contact C
WHERE CONTAINS(C.FirstName, 'Test')
OR CONTAINS(C.LastName, 'Test')
The problem is it's clearly running a case sensitive search. I did a quick search to find out how to change it to be case in-sensitive and found two pages (both for SQL Server 2012) with conflicting answers:
1 - MSDN - "Query with Full-Text Search" - http://msdn.microsoft.com/en-us/library/ms142583(v=sql.110).aspx
Case sensitivity
Full-text search queries are case-insensitive. However, in Japanese, there are multiple phonetic orthographies in which the concept of orthographic normalization is akin to case insensitivity (for example, kana = insensitivity). This type of orthographic normalization
is not supported.
1 - TechNet - "Full-Text Search (SQL Server)" - http://technet.microsoft.com/en-us/library/ms142571(v=sql.110).aspx
Full-text queries are
not case-sensitive. For example, searching for "Aluminum" or "aluminum" returns the same results.
Can someone please explain this? Is it possible to do it without it being case sensitive? If yes, how?
(Sorry, I couldn't make those links b/c TechNet hasn't verified my account)
Thank you for your time and help,
Hanan

Whats the collation setting for the columns? try using a case insensitive collation as below
SELECT *
FROM sysdba.Contact C
WHERE CONTAINS(C.FirstName COLLATE SQL_Latin1_General_CP1_CI_AS, 'Test')
OR CONTAINS(C.LastName COLLATE SQL_Latin1_General_CP1_CI_AS, 'Test')
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Upgrade the Edition for SQL Server 2012

Hi All,
After spending 3hrs on the phone to MS in India I'm trying here as a last resort!
I'm trying to upgarde my SQL server 2012 Developer version from Evaluation to a full copy. I've been told that my Product key (Note I do not have a Product ID) is legit from the front line support.
However when I run hte SQL Server Installation Center (as an Administrator) I go to the following:
Maintenance
Edition upgrade
Pass first validation
Then enter in the Product Key and I get the following back in SQL:
"There are validation errors on this page. Click OK to Close this dialog box. Review Errors at the bottom of the setup page, then provide valid parameters or click help for more information".
I can only click on OK and then I'm left with either Next (same thing happens) or Cancel (which halts the full installation) finally help (which is useless).
Any help and ideas greatly appreciated!!!
Gavin

Hello,
Make sure the product language of the SQL Server 2012 Developer Edition is the same of the Evaluation Edition you have
installed. If they have different product language, you may receive the "There are validation errors on this page" error message.
For more information, please read the following resource:
http://www.sqlcoffee.com/Troubleshooting104.htm
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Is it possible to install SQL Server 2012 Standard Edition on a Windows Server 2012 Standard Which is installed on a Virtual Machine that is created by Hyper-V?

Hi
I have recently bought a Virtual Machine from a data center and installed a Windows Server 2012 Standard Edition on it. As I tried to install the SQL Server 2012 Standard Edition, the data center administrator denied me to do this telling me it is not possible
to install any licensed Microsoft software on a Windows installed on virtual machine created by Hyper-V. It was really strange for me! I wanna know if this is true.
Thanks Everybody

Hi Farid,
For SQL server running on virtual server please refer to following article :
http://blogs.technet.com/b/peeyusht/archive/2010/03/19/sql-licensing-under-virtualization.aspx
In addition , for license issue we still recommend you to contact MS Activation Center:
http://www.microsoft.com/licensing/existing-customers/activation-centers.aspx
Best Regards,
Elton Ji
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected] .

Connect to Microsoft SQL server 2012

HI,
Currently My OSB connects to MS SQL server to get some data and then construct the request to submit to another web service. But recently the SQL server that I connect to has upgraded(previously was MS SQL 2005) to MS SQL to 2012. There are certain properties that needs to be changed in the connection property(for example : ApplicationIntent=ReadOnly) and I am not sure where to change this connection property. I am using sqljdbc4.jar for connectivity. Please advice. This is a bit urgent and appreciate if someone can help me out ASAP.
After the upgrade I am not able to connect to the SQL server DB as well. This is the error
Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/SGH/LabResults/SCMLabService [ SCMLabService_ptt::SCMLabService(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SCMLabService' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/myAPPConn].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/myAPPConn].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/SGH/LabResults/SCMLabService [ SCMLabService_ptt::SCMLabService(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SCMLabService' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/myAPPConn].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/myAPPConn].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
at com.bea.wli.sb.transports.jca.binding.JCATransportOutboundOperationBindingServiceImpl.invoke(JCATransportOutboundOperationBindingServiceImpl.java:155)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.sendRequestResponse(JCATransportEndpoint.java:209)
at com.bea.wli.sb.transports.jca.JCATransportEndpoint.send(JCATransportEndpoint.java:170)
at com.bea.wli.sb.transports.jca.JCATransportProvider.sendMessageAsync(JCATransportProvider.java:571)
at sun.reflect.GeneratedMethodAccessor1269.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.wli.sb.transports.Util$1.invoke(Util.java:83)
at $Proxy143.sendMessageAsync(Unknown Source)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageAsync(LoadBalanceFailoverListener.java:148)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToServiceAsync(LoadBalanceFailoverListener.java:603)
at com.bea.wli.sb.transports.LoadBalanceFailoverListener.sendMessageToService(LoadBalanceFailoverListener.java:538)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageToService(TransportManagerImpl.java:558)
at com.bea.wli.sb.transports.TransportManagerImpl.sendMessageAsync(TransportManagerImpl.java:426)
at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:377)
at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:76)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:134)
at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:132)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:147)
at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:137)
at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(TestService_sqr59p_EOImpl.java:353)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_1033_WLStub.invoke(Unknown Source)
at com.bea.alsb.console.test.TestServiceClient.invoke(TestServiceClient.java:174)
at com.bea.alsb.console.test.actions.DefaultRequestAction.invoke(DefaultRequestAction.java:117)
at com.bea.alsb.console.test.actions.DefaultRequestAction.execute(DefaultRequestAction.java:70)
at com.bea.alsb.console.test.actions.ServiceRequestAction.execute(ServiceRequestAction.java:143)
at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
at org.apache.beehive.netui.pageflow.interceptor.action.internal.ActionInterceptors.wrapAction(ActionInterceptors.java:91)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processActionPerform(PageFlowRequestProcessor.java:2116)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.processActionPerform(SBConsoleRequestProcessor.java:91)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.processInternal(PageFlowRequestProcessor.java:556)
at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.process(PageFlowRequestProcessor.java:853)
at com.bea.alsb.console.common.base.SBConsoleRequestProcessor.process(SBConsoleRequestProcessor.java:191)
at org.apache.beehive.netui.pageflow.AutoRegisterActionServlet.process(AutoRegisterActionServlet.java:631)
at org.apache.beehive.netui.pageflow.PageFlowActionServlet.process(PageFlowActionServlet.java:158)
at com.bea.console.internal.ConsoleActionServlet.process(ConsoleActionServlet.java:256)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at com.bea.console.internal.ConsoleActionServlet.doGet(ConsoleActionServlet.java:133)
at com.bea.alsb.console.common.base.SBConsoleActionServlet.doGet(SBConsoleActionServlet.java:49)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1199)
at org.apache.beehive.netui.pageflow.PageFlowUtils.strutsLookup(PageFlowUtils.java:1129)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.executeAction(ScopedContentCommonSupport.java:687)
at com.bea.portlet.adapter.scopedcontent.ScopedContentCommonSupport.processActionInternal(ScopedContentCommonSupport.java:142)
at com.bea.portlet.adapter.scopedcontent.StrutsStubImpl.processAction(StrutsStubImpl.java:76)
at com.bea.portlet.adapter.NetuiActionHandler.raiseScopedAction(NetuiActionHandler.java:111)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:181)
at com.bea.netuix.servlets.controls.content.NetuiContent.raiseScopedAction(NetuiContent.java:167)
at com.bea.netuix.servlets.controls.content.NetuiContent.handlePostbackData(NetuiContent.java:225)
at com.bea.netuix.nf.ControlLifecycle$2.visit(ControlLifecycle.java:180)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:324)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walkRecursive(ControlTreeWalker.java:334)
at com.bea.netuix.nf.ControlTreeWalker.walk(ControlTreeWalker.java:130)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:395)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:361)
at com.bea.netuix.nf.Lifecycle.processLifecycles(Lifecycle.java:352)
at com.bea.netuix.nf.Lifecycle.runInbound(Lifecycle.java:184)
at com.bea.netuix.nf.Lifecycle.run(Lifecycle.java:159)
at com.bea.netuix.servlets.manager.UIServlet.runLifecycle(UIServlet.java:388)
at com.bea.netuix.servlets.manager.UIServlet.doPost(UIServlet.java:258)
at com.bea.netuix.servlets.manager.UIServlet.service(UIServlet.java:199)
at com.bea.netuix.servlets.manager.SingleFileServlet.service(SingleFileServlet.java:251)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.AsyncInitServlet.service(AsyncInitServlet.java:130)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at oracle.dms.wls.DMSServletFilter.doFilter(DMSServletFilter.java:330)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.doIt(WebAppServletContext.java:3684)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3650)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:121)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2268)
at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2174)
at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1446)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/SGH/LabResults/SCMLabService [ SCMLabService_ptt::SCMLabService(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'SCMLabService' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/myAPPConn].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/myAPPConn].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.myAPPConn'. Resolved 'jdbc'; remaining name 'myAPPConn'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
Thanks in advance
Sridhar

Hi All,
I really appreciate your valuable inputs. My hair about to fall because of this problem
L
Tom, thanks, I have gone through that article weeks ago, but no luck
J
The Summary:
I have made a work around to resolve my problem. I have created a new virtual server on the second physical DELL server (with SQL Express 2012).
The problem seems to be a network issue on the hyper-V virtual switch!!
More details:
As described previously, VS connects to SQL service within the same Hyper-V only, although all configuration are right. From any PC within my domain, I can connect to the SQL server on the first Hyper-V service using the ODBC or the connection string file
(.UDL), BUT not through the “visual studio express 2012 web” !!!!!!!!!
Now, I can connect from any PC (using visual studio express 2012 web) to any SQL server Express 2012 on the second Hyper-V .
I have made 4 virtual service on the first hyperV and 4 on the second HyperV. All with the same result:
VS on PC’s can connect normally to any SQL server on the second HyperV
VS on PC’s can NOT connect to any SQL server on the first HyperV
VS on virtual servers on first HyperV can connect normally to any SQL server on the same physical machine/Same hyperV .
VS on virtual servers on first HyperV can connect normally to any SQL server on the second physical machine/Second hyperV .
VS on virtual servers on the second HyperV can connect to any SQL server on PC’s or on the second HyperV/Same physical machine.
VS on virtual servers on the second HyperV can NOT connect SQL servers on the first HyperV
Long story that last more than one month
L

ODBC Problems with SQL Server 2012 on Virtual Machine

I am having problem with my application after my IT department upgraded to SQL Server 2012 with error "ConngetDataToModify.vi:1"<ERR>Object 0x2222222 is not valid. I have 4 servers running the same executable without problem before the upgraded. However, after the upgrade 2 of these Server are having the problem with the ODBC connection. Here are my setup, the application was created using LabView8.5, we have 2 physical server box running Window Server 2003, 2 Virtual Machine on Windows Server 2008, and a Virtual Machine with SQL 2012 Server. The 2 physical server running the executable without a problem after the upgrade, but the 2 Virtual Server were unable to connects to the ODBC connection. Anyone have any idea why this is happening , it is the problem with compatibility between my application with Server 2008 and SQL 2012 Server, or is there a problem with both beings Virtual Servers? As I said, the 2 physical Server seem to be running without any problem with the upgrade.

My guess is that the problem is not specifically with LV. This should be relatively easy to check if you create a UDL file and double click it. This opens a Microsoft wizard which allows you to configure and test DB connections (the UDL file itself is basically just a text file which holds a connection string). If it doesn't work there, it won't work in LV.
As for what the actual problem is, a common culprit is the firewall, which is easy enough to check by disabling it. Another option is the surface area configuration of SQL Server, which will not allow network connections unless you tell it to.
It should probably also be noted that LV 8.5 is not officially supported on Windows Server. I'm assuming that's not the issue, but be aware of it.
Try to take over the world!

Data Retrieval from SSRS 2008 R2 to SQL Server 2012 standard

Hello,
We have a virtual machine running SSRS 2008 R2 and a physical server running SQL server 2012 standard. We are having an issue with a report that is taking almost 10 minutes for the data to be retrieved from the sql 2012 database. We used the
execution logging query to debug and analyze. We see that it renders and processes very fast, but the data retrieval time is very slow. When the same query is run using sql studio mgr. from the SSRS server it runs just fine...it
takes seconds for the results to come up.
I don't believe there is a compatibilty issue because other reports run fine. We're just having problems with one report.

A long shot, but I've seen where the data type of a report parameter is mismatched against the data type of the table it is being compared against. SQL profiler would show this clearly.
This would explain why the query returns quickly in ssms but not with the report.

SQL Server 2012 Multi-Site clustering with 2 nodes for HA and DR

Usually we setup 2 Node Prod cluster for Local HA and 1 or 2 Nodes in other data centre for DR
Given that we have an option to setup multi-site / multi-subnet clustering from SQL 2008 R2/2012. I am planning to use just 2 nodes, 1 in prod data centre and 1 in DR data centre with 2 or 3 instances. This will act as both HA and DR solution.
I would like to know if this solution is good, and any disadvantages, any best practices, etc.? By implementing this I can save some cost on physical servers.
Following will be configured:
* Will be using different subnets, quorum on different server with "Node and File Share Majority"
* All virtual IPs will be registered for virtual name, and Subnetdelay, Subnet threshold will be modified accordingly
* All nodes on same domain
* Use SAN Disk with replication to DR site

SQL 2008 R2 doesn't support multi-subnet clustering. You would still need 3rd party component like VLAN and Disk Replication. SQL 2012 is the first version to support multi-subnet clustering without using VLAN. you would still need disk replication hardware/software.
Taken from my book
Since nodes are often located in two different data centers at geographically dispersed locations, there is no shared storage between the nodes in a multi-site cluster. Clustering across two different data centers provides a higher level of availability and
protection at the storage level as we have more than a single copy of the data.
For SAN replication technology implemented in such clusters, the main activity is to keep data replicated between the sites. Typically, if we have nodes on two different sites, we would have two different network infrastructures and the nodes would be in
different subnets. In such cases, if we are on a SQL Server version before 2012, we need to use third party VLAN (Virtual LAN) technology so that one IP address travels between two sites. This is called wide-IP. Companies hesitate with this solution because
of the need to buy a third party solution to deploy the VLAN. Using VLAN technology means the same IP address would failover to the remote site in case of a local site disaster. Network administration might consider this as an overhead to maintenance and an
extra piece of the networking component that needs to be secure.
With SQL Server 2012 we do not need to use stretch VLAN technology but SAN replication is still needed for multi-site clustering. The OS version for this can be from Windows Server 2008 R2 and above. In this deployment, we can have a SQL virtual network
name having an “OR” dependency on two different IP addresses. One address would be representing each subnet. With the “OR” dependency, if IP1 or IP2 is online we just use the network name. This is one of the Enterprise Editions only features.
Other option which you can think of, without using 3rd party solutions would be AlwaysOn Availability Group. I have written details about it in my book.
Balmukund Lakhani | Please mark solved if I've answered your question, vote for it as helpful to help other users find a solution quicker
This posting is provided "AS IS" with no warranties, and confers no rights.
My Blog |
Team Blog | @Twitter
Author: SQL Server 2012 AlwaysOn -
Paperback, Kindle

SQL Server 2012 Database with FileStream enabled tables

Hi,
I have some questions concerning the SQL Server 2012 FileStream feature.
In a database combining both Filestream connected tables and none filestream connected tables. It is obviously possible to tell the root path to a filestream FILEGROUP. It's also possible to create database primary data file (.mdf) and several
optional secondary data files (.ndf), and multiple log files.
If I have two filestream connected tables, which each in turn have a couple of other referenced tables (none filestream connected). Is it possible to put the filestream filegroup1 (eg. the filestream connected table1) and its referenced none filestream connected
tables, their data, indexes etc., on the same physical data file? And the other filestream connected table and its referenced tables to another physical file (.ndf)? If this is possible and recommended, how do I declare such an create database statement?
For ex. when having tables for both none archived state, archived state, in the same database. Or is the best solution to split the two (and its referenced tables) in separate databases?
SWEDEV

Hello,
File groups a just contains for the objects, you e.g. can split one table over several file Groups/secondarie files using partitioning. And a filestream is also just a table. You can reference all table Independent of file Groups / file stream.
Olaf Helper
[ Blog] [ Xing] [ MVP]

SQL Server 2012 Standard and hyperthreading core count

I have 2 Intel E5-2640 v2 processors for my SQL Server 2012 Standard server. Each processor has 8 cores and has hyper threading so it has 16 logical cores. Will SQL standard be able to use hyper threading? Since it has a 16 core limit, does it see hyper
threading as an extra core or will it only look at the 8 cores each processor has?

Ignoring licencing, Standard version can only use up to 16 cores. In my case I have 16 cores but 32 logical cores. Will the Standard edition only use the first 16 logical processors or will it use all logical cores since I have 16 physical cores
that just happens to have hyper threading?
As per my understanding whatever is less than 16, Physical core or logical core will use that .But I am not sure best answer would be from Microsoft.
Reading there below statement .
'When hyper-threading is enabled, the Basic Input Output System (BIOS) uses a logical to physical CPU ratio. Current implementations are using 2:1 ratios. This means that there are two (2) logical CPUs for each physical CPU. These ratios may change in the
future; however, Microsoft SQL Server 2000 Service Pack 3 (SP3) and later versions have additional licensing code that adjusts the licensing restrictions to handle the ratio. For example,
if the SQL Server product code that you have installed permits a 4 CPU license at a 2:1 ratio, the SQL Server 2000 SP3 build and later builds adjust and let you use 8 CPUs.
So it says if you have license for 4 CPU but if it is hyperthreaded it can use 8.But again if number goes over 16 for standard edition I guess it would not use above 16.So in your case Enabling hyperthreading would have no use.
NOTE: This is complex discussion and correct answer would be what Microsoft says :)
PS: Please read link I have posted it is applicable to 2012 as well
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Unable to install SQL Server 2012 on windows 7 os

Hello All,
I am trying to install SQL Server Enterprise evaluation edition sp1 on windows 7 os professional edition.
Previously I have used to sql server 2012 enterprise evaluation edition on the same os. I did not have any issues at that time.
But now, I formatted my system and re-installed the same operating system. But now it is showing the below error to me when i tried to install sql server on my system.
Please help me.
Thanks in advance.
Thanks and Regards, Readers please vote for my posts if the questions i asked are helpful.

Hello,
This is a known issue. Please try the workarounds posted on the following link:
https://connect.microsoft.com/SQLServer/feedback/details/707706/unable-to-uninstall-sql-server-2012-rc0-from-control-panel
Look at the Workarounds section.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Msg 8631 Internal error: Server stack limit has been reached on SQL Server 2012 from T-SQL script that runs on SQL Server 2008 R2

I have an Script mostly that is generated by SSMS which works with-out issue on SQL Server 2008, but when I attempt to run it on a new fresh install of SQL Server 2012 I get an Msg 8631. Internal error: Server stack limit has been reached. Please look for
potentially deep nesting in your query, and try to simplify it.
The script itself doesn't seem to be all that deep or nested. The script is large 2600 lines and when I remove the bulk of the 2600 lines, it does run on SQL Server 2012. I'm just really baffled why something that SQL Server generated with very
few additions/changes AND that WORKS without issue in SQL Server 2008 R2 would suddenly be invalid in SQL Server 2012
I need to know why my script which is working great on our current SQL Server 2008 R2 servers suddenly fails and won't run on an new SQL Server 2012 server. This script is used to create 'bulk' Replications on a large number of DBs saving a tremendous
amount of our time doing it the manual way.
Below is an 'condensed' version of the script which fails. I have removed around 2550 lines of specific sp_addarticle statements which are mostly just copy and pasted from what SQL Management Studio 'scripted' for me went I when through the Replication
Wizard and told it to save to script.
declare @dbname varchar(MAX), @SQL nvarchar(MAX)
declare c_dblist cursor for
select name from sys.databases WHERE name like 'dbone[_]%' order by name;
open c_dblist
fetch next from c_dblist into @dbname
while @@fetch_status = 0
begin
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 2400 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script =
null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509F, @identityrangemanagementoption = N''manual'', @destination_table = N''TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false'', @ins_cmd = N''CALL sp_MSins_dboTABLE_ONE'',
@del_cmd = N''CALL sp_MSdel_dboTABLE_ONE'', @upd_cmd = N''SCALL sp_MSupd_dboTABLE_ONE''
EXEC sp_executesql @SQL
SET @dbname = REPLACE(@dbname, 'dbone_', 'dbtwo_');
print @dbname
SET @SQL = 'DECLARE @dbname NVARCHAR(MAX); SET @dbname = ''' + @dbname + ''';
use ['+@dbname+']
exec sp_replicationdboption @dbname = N'''+@dbname+''', @optname = N''publish'', @value = N''true''
use ['+@dbname+']
exec ['+@dbname+'].sys.sp_addlogreader_agent @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1, @job_name = null
-- Adding the transactional publication
use ['+@dbname+']
exec sp_addpublication @publication = N'''+@dbname+' Replication'', @description = N''Transactional publication of database
'''''+@dbname+''''' from Publisher ''''MSSQLSRV\INSTANCE''''.'', @sync_method = N''concurrent'', @retention = 0, @allow_push = N''true'', @allow_pull = N''true'', @allow_anonymous = N''false'', @enabled_for_internet
= N''false'', @snapshot_in_defaultfolder = N''true'', @compress_snapshot = N''false'', @ftp_port = 21, @allow_subscription_copy = N''false'', @add_to_active_directory = N''false'', @repl_freq = N''continuous'', @status = N''active'', @independent_agent = N''true'',
@immediate_sync = N''true'', @allow_sync_tran = N''false'', @allow_queued_tran = N''false'', @allow_dts = N''false'', @replicate_ddl = 1, @allow_initialize_from_backup = N''true'', @enabled_for_p2p = N''false'', @enabled_for_het_sub = N''false''
exec sp_addpublication_snapshot @publication = N'''+@dbname+' Replication'', @frequency_type = 1, @frequency_interval = 1, @frequency_relative_interval = 1, @frequency_recurrence_factor = 0, @frequency_subday = 8,
@frequency_subday_interval = 1, @active_start_time_of_day = 0, @active_end_time_of_day = 235959, @active_start_date = 0, @active_end_date = 0, @job_login = N''DOMAIN\DBServiceAccount'', @job_password = N''secret'', @publisher_security_mode = 1
-- There are around 140 lines roughly the same as this only difference is the tablename repeated below this one
use ['+@dbname+']
exec sp_addarticle @publication = N'''+@dbname+' Replication'', @article = N''DB_TWO_TABLE_ONE'', @source_owner = N''dbo'', @source_object = N''DB_TWO_TABLE_ONE'', @type = N''logbased'', @description = null, @creation_script
= null, @pre_creation_cmd = N''drop'', @schema_option = 0x000000000803509D, @identityrangemanagementoption = N''manual'', @destination_table = N''DB_TWO_TABLE_ONE'', @destination_owner = N''dbo'', @vertical_partition = N''false''
EXEC sp_executesql @SQL
fetch next from c_dblist into @dbname
end
close c_dblist
deallocate c_dblist
George P Botuwell, Programmer

Hi George,
Thank you for your question.
I am trying to involve someone more familiar with this topic for a further look at this issue. Sometime delay might be expected from the job transferring. Your patience is greatly appreciated.
Thank you for your understanding and support.
If you have any feedback on our support, please click
here.
Allen Li
TechNet Community Support

I get one or the other error when i install SQL server 2012 SP1 in my Lab server

I get multiple errors when i install SQL server 2012 SP1 In my lab server.
Not sure why i keep getting different errors all the time when i install SQL server 2012 & 2012 SP1.
Below are error codes, screen shots and also a log of the error.
1. Eror code 0X84B40000
Also dint understand any thing from this article related to the above error
http://social.technet.microsoft.com/Forums/sqlserver/en-US/5b6cc928-0db8-4fe4-a5d3-21672225f0ca/i-get-error-code-0x84b40000-when-trying-to-install-sql-server-mgmt-studio-to-an-existing-sql?forum=sqlexpress
2. Eror code 0x851A001A
Can any one plz help as i always get one or the other error.
====================================
Screen shot:
Please note the below screen shot has given the error code 0x851A001A which is same in case of failure of all the other features which have failed during this installation. Hence i have uploaded only one screen shot.
2. Log file content.
=================================
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-05-04 21:15:35
End time: 2014-05-04 21:51:45
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: SERVER1
Machine processor count: 2
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Database Engine Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER SQL Server Replication 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Full-Text and Semantic Extractions for Search 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSSQL11.MSSQLSERVER Data Quality Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSAS11.MSSQLSERVER Analysis Services 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 MSSQLSERVER MSRS11.MSSQLSERVER Reporting Services - Native 1033
Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Basic
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Management Tools - Complete
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Connectivity
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools Backwards Compatibility
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Client Tools SDK
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Integration Services
1033 Enterprise Edition 11.0.2100.60 No
SQL Server 2012 Reporting Services - SharePoint
11.0.2100.60 No
Package properties:
Description: Microsoft SQL Server 2012 Service Pack 1
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: F:\x64\setup\
Installation edition: Enterprise
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: false
AGTSVCACCOUNT: ms\sql
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Automatic
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: false
ENU: true
ERRORREPORTING: true
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT Service\MSSQLFDLauncher$SCOM
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: SCOM
INSTANCENAME: SCOM
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: <empty>
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer$SCOM
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: ms\sql
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: MS\Gautam, MS\SCOM Users
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 1
UIMODE: Normal
UpdateEnabled: true
UpdateSource: MU
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\ConfigurationFile.ini
Detailed results:
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: SQL Writer
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20140504_204851\SystemConfigurationCheck_Report.htm

Sorry about the error in the path, but you find the files that's the main thing.
Indeed it is a certificate problem:
2014-05-04 21:47:43.56 spid12s Error: 17190, Severity: 16, State: 1.
2014-05-04 21:47:43.56 spid12s Initializing the FallBack certificate failed with error code: 1, state: 20, error number: 0.
2014-05-04 21:47:43.56 spid12s Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x80. Reason: Unable to initialize SSL support. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17182, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s TDSSNIClient initialization failed with error 0x80092004, status code 0x1. Reason: Initialization failed with an infrastructure error. Check for previous errors. Cannot find object or property.
2014-05-04 21:47:43.57 spid12s Error: 17826, Severity: 18, State: 3.
2014-05-04 21:47:43.57 spid12s Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2014-05-04 21:47:43.57 spid12s Error: 17120, Severity: 16, State: 1.
2014-05-04 21:47:43.57 spid12s SQL Server could not spawn FRunCommunicationsManager thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
I've recall that I've tried to help people with this error before, but I'm sure they were able to sort it out.
Anyway, this blog post,
http://blogs.msdn.com/b/sqljourney/archive/2012/10/09/sql-2008-service-fails-to-come-online-with-a-valid-certificate-could-not-be-found-and-it-is-not-possible-to-create-a-self-signed-certificate.aspx
suggests the issue is a corrupted user profile, and you should try to use a different service account.
This blog also seems to have a simple solution, but I cannot vouch for that it will work:
http://www.beejblog.com/2012/02/sql-server-solved-unable-to-initialize.html
Erland Sommarskog, SQL Server MVP, [email protected]

SQL Server 2012 Physical vs. Hyper-V Same Query Different Results

Similar Messages

Maybe you are looking for