SQL Server Browser
I am installing SQL Server 2012.
At the "Server Configuration" point, "SQL Server Browser" greyed out, and set to "NT AUTHORITY\LOCAL SERVICE"
Will I be able to amend the SQL Server Browser to use an different account after install ?
(using Sql Server Config Manager for example ?)
Thanks in advance
Pete
Yes any time you can configure...
Default Account
Setup configures SQL Server Browser to use the account selected for services during setup. Other possible accounts include the following:
Any domain\local account
The local service account
The local system account (not recommended as has unnecessary privileges)
http://msdn.microsoft.com/en-us/library/hh510203.aspx
http://technet.microsoft.com/en-us/library/ms165734(v=sql.90).aspx
Raju Rasagounder Sr MSSQL DBA
Similar Messages
-
Unable to start SQL Server Browser service in Sql server 2005
we are unable to start the SQL browser service on one of our machine with below error.
I believe this to be the reason, why we could not connect to the instance with below error
I tried troubleshooting as mentioned here, by changing
value in registry from 1 to 0, but still no luck.
SQLservices are also running.
Please help on how to resolve this!Hello,
You say that SQL Server Browser Service belongs to a SQL Server 2005, but based on the name of the instance is a SQL Server
2012 instance.
Do you have any issues installing/uninstalling SQL Server 2005 or 2012? One of them 32-bit and the other 64-bit?
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Hello,
I have an issue while installing SQL Server 2008 R2 Express. When I was installing SQL Server, I occurred an error message as shown in the figure.
I have followed couple of links as in
this and
this links but it did not fix the issue. Can anyone help me on this issue?
Regards
GauravHi gauravroondhe2306,
According to your description, you fail to install SQL Server 2008 R2 express with the error that SQL Server Browser service group does not exist. Please help to post SQL Server setup error log for analysis. By default, SQL Server setup summary and detail
logs are located in C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log.
Based on my research, this issue could occur when you install SQL Server on a Domain Controller, or the machine's name has been changed and the browser service group is named with the original machine's name.
To troubleshoot the issue, you could follow the solutions below.
1.Use SQL Server 2008 R2 Best Practice Analyzer to detect if SQL Server is installed on a domain controller. If SQL Server is installed on a domain controller, please demote your machine from being a domain controller and install the SQL Server again since
it is not recommended to install SQL Server on a domain controller.
2.Check if the name of local user group matches the machine's current name. If it doesn't match, please change the name of the local user group accordingly, and install SQL Server again. For more information about the process, please refer to the article:
http://geekswithblogs.net/TedStatham/archive/2014/04/15/installation-problems-with-sql-server-2008-r2-express.aspx
Regards,
Michelle Li -
we have two instance of sql server 2014,
In Services, It shows only one SQL Server browser services.
Is it true there is only one SQL Browser service for both instances.
Thanks
VYes, This is normal.
Prior to SQL Server 2000, only one instance of SQL Server could be installed on a computer. SQL Server listened for incoming requests on port 1433, assigned to SQL Server by the official Internet
Assigned Numbers Authority (IANA). Only one instance of SQL Server can use a port, so when SQL Server 2000 introduced support for multiple instances of SQL Server, SQL Server Resolution Protocol (SSRP) was developed to listen on UDP port 1434. This listener
service responded to client requests with the names of the installed instances, and the ports or named pipes used by the instance. To resolve limitations of the SSRP system, SQL Server 2005 introduced the SQL Server Browser service as a replacement for SSRP.
more info: SQL Server Browser Service
T-SQL e-book by TechNet Wiki Community
My Blog
My Articles -
Including AlwaysOn Listeners in a SQL Server Browser list box
I am using the SmoApplication.EnumAvailableSqlServers class/method to enumerate SQL Servers on my network to allow my users to select a SQL Server from a list of the available servers on the network.
My issue is that AlwaysOn Availability Groups (listeners) are not included in this list. I understand how it would be difficult for the EnumAvailableSqlServers method to find them (AO listeners have non-standard port numbers), but are there
any alternatives other than having users type in everything by hand (very error-prone and is a bit, let's say, user-belligerent)?
Any ideas?
Thanks,
Rob
thanks, Rob HutchisonHi Rob,
Like this document:
https://msdn.microsoft.com/en-us/library/microsoft.sqlserver.management.smo.smoapplication.enumavailablesqlservers.aspx?f=255&MSPPError=-2147217396
Just to make this issue clearly, whether this issue is related to the SQL Server?
Actually this forum is to discuss:
Visual Studio WPF/SL Designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System, and Visual Studio Editor.
Sorry for that I didn't find the information which is related to the VS, so it would be better if you could share us more information about this issue, but if it is the SQL Server issue, please select the forum here:
https://social.msdn.microsoft.com/Forums/sqlserver/en-US/home?category=sqlserver
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Cannot Connect to SQLServer 2014, Cannot start SQL Server Browser
I have SQLServer 2014 Developer Installed I am trying to connect to it from a .aspx page. I get error 26 "server was not found or was not accessible............". Thus is all being done on a local machine using IIS 8.5.
<add key="ConnectionString" value="server=DONSR\sqlserverexpress;Trusted_Connection=False;database=PLF;UID=sa;PWD=cool4309" />
In the SGL 2014 configuration module. Everything is enabled including TCP/IP, EXCEPT the SQL Browser. When I try to enable it I get "This service cannot be stated, either, because it is disabledor
because it has no enable devices with it [ox80070422]"Hello,
You said that you are trying to connect from an ASPX page. which I assume it is hosted on a remote server (not on the sql box)
There are two possible problems
1 - TCP/IP disabled
http://msdn.microsoft.com/en-us/library/ms191294.aspx
2 - Windows firewall on the SQL box blocking TCP Port 1433 (I believe this is what is happening to you)
To confirm if this is the case, from a remote computer try to connect using Telnet to the port 1433
TELNET SQL_SERVER_NAME 1433
If this is the case you have to configure windows firewall to allow incoming connections to this port
Regards
Javier Villegas |
@javier_vill | http://sql-javier-villegas.blogspot.com/
Please click "Propose As Answer" if a post solves your problem or "Vote As Helpful" if a post has been useful to you -
How to Configure Remote Connections To SQL Server 2008 R2 Express
Post written June 10, 2010 and pertains to:
SQL Server 2008 R2 Express on both my server and local machines: SQLX_SRV,
SQLX_LOC
SQL Server 2008 R2 Management Studio on both my server and local machines:
MS_SRV, MS_LOC
Windows Server 2008 R2 Enterprise installed on a Hyper-V VPS: WS
SQL Server Configuration Manager on both my server and local machines:
CMGR_SRV, CMGR_LOC
Server Manager: SMGR
I am connecting to my hosting server via Remote Desktop Connection: RDC
I installed SQLX_SRV and MS_SRV on my hosting server and SQLX_LOC and MS_LOC on my local development machine. I am able to use MS_LOC to connect to SQLX_LOC and to use MS_SRV to connect to SQLX_SRV. However I am not able to use MS_LOC to connect
with SQLX_SRV. Here's what I have done so far:
SMGR -> Configuration -> Windows Firewall to turn off the Windows Firewall for Domain, Private and Public profiles. Obviously I'll change this later, but until I can connect I want to remove as many variables as possible.
CMGR_SRV -> SQL Server Services to confirm that both SQL Server (SQLEXPRESS) and SQL Server Browser services were running.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS to ENABLE the Shared Memory, Named Pipes, and TCP/IP protocols and DISABLE the deprecated VIA protocol.
CMGR_SRV -> SQL Server Network Configuration -> Protocols for SQLEXPRESS -> double click TCP/IP to open the TCP/IP properties dialogue. On the Protocol tab Enabled: Yes, Keep Alive: 30000, changed Listen All to No. I've tried it both
ways, but I've got six IP addresses on my server and I wanted to configure SQLEXPRESS to listen to only the first and primary IP. On the IP Addresses tab went to IPALL and cleared the TCP Dynamic Ports field and entered 1433 in the TCP Port field.
For my first and primary IP Address I made sure that Enabled was Yes, I cleared the TCP Dynamic Ports field, and entered 1433 in the TCP Port field. For all other IP Addresses Enabled was set to No and I cleared both the TCP Dynamic Ports and TCP Port
fields.
CMGR_SRV -> SQL Server Services -> SQL Server (SQLEXPRESS) right click and Restart. This of course stopped and restarted my instance of SQLX_SRV enabling the TCP/IP configuration in the previous step to take effect.
On my server, SQLX_SRV is the only instance of SQL Server running and so it's easy to hard wire it to the default port 1433.
The instance name for both SQLX_SRV and SQLX_LOC is the default "SQLEXPRESS". My server machine name is "SERVER1" on the EnglishBrains.com domain. So the proper local name (local within the context of my remote server as connected via RDC) for
my instance of SQLX_SRV would be:
SERVER1\SQLEXPRESS
Note the use of a backslash NOT a forward slash.
Of course to connect remotely from my development machine, which is not on the same domain as my hosting server, I would need to specify the domain as well, so the SQL Server name becomes:
SERVER1.EnglishBrains.com\SQLEXPRESS
I must also use SQL Server Authentication. Before I can use such a remote connection, however, there are still several configuration steps required. So on my server (connected via RDC) I used MS_SRV to connect to SQLX_SRV using SERVER1\SQLEXPRESS
for the server name and Windows Authentication. Once connected I performed the following steps:
MS_SRV -> right click the connected parent SERVER1\SQLEXPRESS instance node at the top -> Properties -> Security -> Server authentication: select "SQL Server and Windows Authentication mode". This will enable connections using either type
of authentication.
Next, leaving the Server Properties dialogue open, Connections -> check "Allow remote connections to this server" box.
Click OK to save these changes and close the Server Properties dialogue.
MS_SRV -> Security -> right click Logins and select "New Login...", the Login - New dialogue opens.
On the General page Enter a name for your new login
Select SQL Server Authorization
Enter and confirm a password
Uncheck Enforce password expiration
Select the default Database and Language
On the ServerRoles page Public will be checked, also check SysAdmin. This is probably not a good idea and I'll uncheck this as soon as I can connect to the SQLX_SRV.
On the User Mapping page select the databases you want your new Login to access and enter the Default Schema of "dbo".
At the bottom of the User Mapping page you'll see the Database Roles table. Public will be selected by default. Also select db_Owner. Again this is probably not a good idea, and I'll refine this once I can connect.
On the Status page confirm that "Grant" is checked under "Permission to connect to database engine" and "Enable" is checked under "Login".
Click OK to save all changes and close the Login - New dialogue.
With these steps completed you should now be able to use MS_SRV to connect to SQLX_SRV using SQL Server Authentication by supplying the name and password for your new Login. I tried this and it worked fine. Next I tried to use this same login
remotely, that is I went to my local development machine and used MS_LOC to try and connect to SQLX_SRV by using
SERVER1.EnglishBrains.com\SQLEXPRESS
and opting for SQL Server Authentication and supplying the name and password of my new login.
THIS DID NOT WORK?? Instead I get the following error message:
Cannot connect to SERVER1.EnglishBrains.com\SQLEXPRESS.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click:
http://www.microsoft.com/products/ee/transform.aspx?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1
If you follow the suggested help link, you are told:
The SQL Server client cannot connect to the server. This error could be caused by one of the following reasons:
A specified SQL Server instance name is not valid.
The TCP, or named pipes protocols are not enabled.
The firewall on the server has refused the connection.
The SQL Server Browser service (sqlbrowser) is not started.
WRONG on all 4 counts! The instance name IS valid. Both TCP/IP and Named Pipes protocols are enabled. The firewall has been shut down, so it is not relevant. Finally the SQL Server Browser IS started.
The next thing I tried was to circumvent discovery by the SQL Browser service by using the following syntax to specify the IP address and port directly when specifying the SQL Server name.
tcp:68.71.134.186,1433
Using this in the Server Name field I was able to use MS_SRV to successfully connect to SQLX_SRV (using SQL Server Authentication of course) with or without the SQL Browser service running.
However when I tried to connect from MS_LOC to SQLX_SRV using this same login (WITH SQL Browser service running just for good measure) it does not work?? I get the following error message:
Cannot connect to tcp:68.71.134.186,1433.
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
TCP Provider, error: 0 - A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond.) (Microsoft SQL Server, Error: 10060)
For help, click:
http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=10060&LinkId=20476
If you follow the help link you are told:
"The SQL Server client cannot connect to the server. This error could occur because either the firewall on the server has refused the connection or the server is not configured to accept remote connections."
However, the firewall has been shut down and the server HAS been configured to accept remote connections!
I confirmed that i could indeed Ping to 68.71.134.186 and running NetStat -a |find /i "listening" on the server shows that the server is indeed listening at 68.71.134.186 Port 1433 -- which is why I was able to connect to SQLX_SRV using MS_SRV with
tcp:68.71.134.186,1433 .
IN SUMMARY: Even though I can connect to my SQLEXPRESS instance multiple ways from the server itself, I cannot connect remotely from my development machine!
If anyone can help me figure out why I would be very, very grateful!My two cents to help you out on c# code example to configure the remote sql server express.
Hope it helps. It works, but you have to be extra carefull to read it all and setup the server configuration and netsh commands; also the port fowarding on the router.
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using System.Data.SqlClient;
namespace sqlremoteconnection
class Program
static void Main(string[] args)
// this is the local sql server connection
// 192.168.1.101\SQLEXPRESS
// now, the configuration for remote access:
// activate SQL SERVER BROWSER - set it to start "automatic"; then START UP
// SQL Server Configuration Manager
// --> SQL SERVER BROWSER -> properties -> Service -> Start Mode -> automatic -> apply
// --> Log On -> Start -> Ok
// netsh firewall set portopening protocol = TCP port = 1433 name = SQLPort mode = ENABLE scope = all profile = CURRENT
// netsh firewall set portopening protocol = UDP port = 1434 name = SQLPort mode = ENABLE scope = all profile = CURRENT
// netsh advfirewall firewall add rule name = SQLPort dir = in protocol = tcp action = allow localport = 1433 remoteip = any profile = PUBLIC
// netsh advfirewall firewall add rule name = SQLPort dir = in protocol = udp action = allow localport = 1434 remoteip = any profile = PUBLIC
// VERY IMPORTANT FOR REMOTE ACCESS: you have to add the rules on port fowarding
// on the router!!!
// TCP: 1433
// UDP: 1434
// or just a personal port like TCP 31433/UDP 31434
// read carefully the netsh commands above
// server name: 123.132.24.177\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,1433 <<-- regular port
// server name: anyurl.myftp.org\SQLEXPRESS
// server name: anyurl.myftp.org\SQLEXPRESS,31433 <<-- WOW different PORT here!!!
SqlConnection myConnection = new SqlConnection(
"user id=sa;" +
"password=password_goes_here!;" +
"server=anyurl.myftp.org\\SQLEXPRESS,31433;" +
//"Trusted_Connection=no;" +
"database=database_name_here; " +
"connection timeout=30");
try
myConnection.Open();
catch (Exception e)
Console.WriteLine(e.ToString());
try
SqlDataReader myReader = null;
SqlCommand myCommand = new SqlCommand("select * from mytable", myConnection);
myReader = myCommand.ExecuteReader();
while (myReader.Read())
Console.WriteLine(myReader["tab01_name"].ToString());
Console.WriteLine(myReader["tab01_age"].ToString());
catch (Exception e)
Console.WriteLine(e.ToString());
try
myConnection.Close();
catch (Exception e)
Console.WriteLine(e.ToString());
Adelino Araujo -
Sql Server 2012 Login Failed for user "NT Authority\System"
I have installed SQL Server on a new server. I have been getting the following error on each of the database in it.
Login failed for user 'NT AUTHORITY\SYSTEM'. Reason: Failed to open the explicitly specified database 'ABC'. [CLIENT: xxx.xxx.xxx.xxx]
Here is some information on the instance:
1) Default instance
2) SQL Server, Sql Server Agent, Sql Server Reporting services are running / log on using a domain service account.
3) Sql Server Browser is disabled.
4) SQL Server VSS Writer is running / log on as Local Service.
5) NT AUTHORITY\SYSTEM does exists in Login with just public server roles.
I ran a trace on login failed and I get:
ApplicationName: Microsoft Windows Script Host
and it runs every 15 minutes.
Help please?Hi,
The error was thrown when the SCOM components connected to the backend SCOM databases.
You can specify a domain account, grant it the sysadmin role and the error should be gone.
Also, see the replies in your previous thread:
http://social.technet.microsoft.com/Forums/en-US/23f6b6cb-ec41-4117-8613-26d24c948827/login-failed-for-user-username-reason-failed-to-open-the-explicitly-specified-database
Thanks.
Tracy Cai
TechNet Community Support -
Establishing connection to SQL server suddenly failed
Hi,
I had a working SQL connection before, but today i've tried to connect and got this message:
TITLE: Connect to Server
Cannot connect to User-PC\SQLEXPRESS.
ADDITIONAL INFORMATION:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
BUTTONS:
OK
p.s. I'm novice to SQL ssms.
with regards,
yaron H.1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The
server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: SQL Network Interfaces, error: 26- Error:Locating Server\instance Specified)
How Can i solve this?1. Make sure SQL Server Service is running
2. If a named instance, make sure SQL Server browser service is running
3. Make sure SQL Server is configured to allow remote connections
4. Examine the SQL Server error log for messages confirming that SQL is listening on the expected network interfaces and ports
5. Test server connectivity with PING from the client machine
6. Test port connectivity using TELNET or PowerShell to the server and port (from step 4) from the client machine. For example
a. TELNET <server-name> 1433
b. PowerShell: 1433 | % { echo ((new-object Net.Sockets.TcpClient).Connect("YourServerName",$_)) "server listening on TCP port $_" }
7. Check firewall settings if step 5 or 6 connectivity test fails
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence -
Sql Server Express 2012 install failure
I have attempted to install sql server 2012 express and keep getting the same error "Attempted to perform an unauthorised operation" It appears to happen while installing "SqlBrowserConfigAction_repair_ConfigNonRC_Cpu32".
The Log has the following:
Detailed results:
Feature: Management Tools - Basic
Status: Passed
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Browser
Component error code: 0x84BB0001
Error description: Attempted to perform an unauthorized operation.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xE32A4906%400x92D13C14&EvtType=0xE32A4906%400x92D13C14
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Browser
Component error code: 0x84BB0001
Error description: Attempted to perform an unauthorized operation.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xE32A4906%400x92D13C14&EvtType=0xE32A4906%400x92D13C14
Feature: SQL Browser
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, and then try the setup process again.
Component name: SQL Server Browser
Component error code: 0x84BB0001
Error description: Attempted to perform an unauthorized operation.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xE32A4906%400x92D13C14&EvtType=0xE32A4906%400x92D13C14
Can anyone see what I am doing wrong?
Thanks in advance
Brad
BHendHello,
Try to download the SQL Server media again. Uninstall any component installed and reinstall SQL Server again.
Please make sure you are running SQL Server setup with Run as Administrator option.
Download Process Monitor and run it to make sure there are no access denied errors accessing the Registry.
https://technet.microsoft.com/en-us/library/bb896645.aspx?f=255&MSPPError=-2147217396
Another possible causes are explained on the following support article.
https://support.microsoft.com/en-us/kb/2799534?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server 2008 Installation on Windows 7
I tried to install SQL Server 2008 on a Windows 7 Home Premium 64 bit (Enterprise Edition Trial Edition). The system check was ok and the installation started successfully but at the end there were some errors. In the logfile there were stacktraces describing failures trying write operations on the registry. What can I do to install SQL Server 2008 on my operating system?
Hello ChunSong Feng,
thanks for your advice. Herewith I send you the text parts from detail.txt with the detailed error description. The whole file is too big to send as content.
Thanks in advance:
2009-11-17 21:05:10 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;CI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1028)
2009-11-17 21:05:10 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:05:10 Slp: ----------------------------------------
2009-11-17 21:05:10 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:05:10 Slp: Inner exceptions are being indented
2009-11-17 21:05:10 Slp:
2009-11-17 21:05:10 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:05:10 Slp: Message:
2009-11-17 21:05:10 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:10 Slp: Data:
2009-11-17 21:05:10 Slp: WatsonData = Microsoft SQL Server
2009-11-17 21:05:10 Slp: DisableRetry = true
2009-11-17 21:05:10 Slp: Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:05:10 Slp: Message:
2009-11-17 21:05:10 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:10 Slp: Stack:
2009-11-17 21:05:10 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:10 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:10 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:10 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:10 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:10 Slp: ----------------------------------------
2009-11-17 21:05:28 Slp: User has chosen to cancel this action
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:30 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:44 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:05:45 SQLBrowser: SQL Server Browser Install for feature 'SQL_Browser_Redist_SqlBrowser_Cpu32' failed with cancel exception: Microsoft.SqlServer.Configuration.Sco.ScoException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen. ---> System.UnauthorizedAccessException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
--- Ende der internen Ausnahmestapelüberwachung ---
bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
bei Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.SetSecurityDescriptorByLocation(String sRegLocation, RegistryView regView, String sSddl, Boolean bOptional)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ApplyRegPermissions(XmlNodeList xmlNodeListRegPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyRegCommonPermissions(XmlElement xmlRootPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyPermissions(String sXmlPermissionsFile, String sBrowserPrincipal)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ConfigStaticProperties(SqlBrowserPublicConfig publicConfigSqlBrowser)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ExecConfigNonRC(SqlBrowserPublicConfig publicConfigSqlBrowser)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.SelectAndExecTiming(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ExecWithRetry(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig).
2009-11-17 21:05:45 SQLBrowser: The last attempted operation: Der '(A;CI;KR;;;[SQLServer2005SQLBrowserUser$UTAS-URMEL])'-Zugriffssteuerungseintrag wird dem Registrierungsschlüssel 'SOFTWARE\Microsoft\Microsoft SQL Server' in der 'Wow6432'-Sicht hinzugefügt, um den SQL Server Browser-Dienst zu konfigurieren..
2009-11-17 21:05:45 Slp: Fehler bei der Konfigurationsaktion für Feature SQL_Browser_Redist während der Zeitangabe ConfigNonRC und Szenario ConfigNonRC.
2009-11-17 21:05:45 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp: Fehler bei der Konfigurationsaktion für Feature SQL_Browser_Redist während der Zeitangabe ConfigNonRC und Szenario ConfigNonRC.
2009-11-17 21:05:45 Slp: Microsoft.SqlServer.Configuration.Sco.ScoException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen. ---> System.UnauthorizedAccessException: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:45 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:45 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp: --- Ende der internen Ausnahmestapelüberwachung ---
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.SetSecurityDescriptorByLocation(String sRegLocation, RegistryView regView, String sSddl, Boolean bOptional)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ApplyRegPermissions(XmlNodeList xmlNodeListRegPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyRegCommonPermissions(XmlElement xmlRootPermissions, Dictionary`2 dictionaryGroups, Dictionary`2 dicLocationFragments)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ApplyPermissions(String sXmlPermissionsFile, String sBrowserPrincipal)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ConfigStaticProperties(SqlBrowserPublicConfig publicConfigSqlBrowser)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.ExecConfigNonRC(SqlBrowserPublicConfig publicConfigSqlBrowser)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.SelectAndExecTiming(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfigBase.ExecWithRetry(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlBrowser.SqlBrowserPrivateConfig.Install(ConfigActionTiming timing, Dictionary`2 actionData, PublicConfigurationBase spcbPublicConfig)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.ExecuteAction(String actionId)
2009-11-17 21:05:45 Slp: bei Microsoft.SqlServer.Configuration.SqlConfigBase.SlpConfigAction.Execute(String actionId, TextWriter errorStream)
2009-11-17 21:05:45 Slp: Ausnahme: Microsoft.SqlServer.Configuration.Sco.ScoException.
2009-11-17 21:05:45 Slp: Quelle: Microsoft.SqlServer.Configuration.Sco.
2009-11-17 21:05:45 Slp: Meldung: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen..
2009-11-17 21:05:45 Slp: Innere Ausnahme:
2009-11-17 21:05:45 Slp: Ausnahme: System.UnauthorizedAccessException.
2009-11-17 21:05:45 Slp: Quelle: mscorlib.
2009-11-17 21:05:45 Slp: Meldung: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen..
2009-11-17 21:05:45 Slp: Completed Action: SqlBro
2009-11-17 21:05:50 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:05:50 Slp: ----------------------------------------
2009-11-17 21:05:50 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:05:50 Slp: Inner exceptions are being indented
2009-11-17 21:05:50 Slp:
2009-11-17 21:05:50 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:05:50 Slp: Message:
2009-11-17 21:05:50 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:50 Slp: Data:
2009-11-17 21:05:50 Slp: WatsonData = 100
2009-11-17 21:05:50 Slp: DisableRetry = true
2009-11-17 21:05:50 Slp: Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:05:50 Slp: Message:
2009-11-17 21:05:50 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:05:50 Slp: Stack:
2009-11-17 21:05:50 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:05:50 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:05:50 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:05:50 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:05:50 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:05:50 Slp: ----------------------------------------
2009-11-17 21:05:57 Slp: User has chosen to cancel this action
2009-11-17 21:05:58 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:05:59 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:17 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:06:17 SSIS: Failed to set registry permission on key 'SOFTWARE\Microsoft\Microsoft SQL Server\100' to SID 'S-1-5-21-2556463381-1186548668-390171815-1029'. Error: 'Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.'
2009-11-17 21:06:17 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1029)
2009-11-17 21:06:17 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:06:17 Slp: ----------------------------------------
2009-11-17 21:06:17 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:06:17 Slp: Inner exceptions are being indented
2009-11-17 21:06:17 Slp:
2009-11-17 21:06:17 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:06:17 Slp: Message:
2009-11-17 21:06:17 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp: Data:
2009-11-17 21:06:17 Slp: WatsonData = SSIS
2009-11-17 21:06:17 Slp: DisableRetry = true
2009-11-17 21:06:17 Slp: Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:06:17 Slp: Message:
2009-11-17 21:06:17 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:17 Slp: Stack:
2009-11-17 21:06:17 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:06:17 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:06:17 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:06:17 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:06:17 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:06:17 Slp: ----------------------------------------
2009-11-17 21:06:24 Slp: User has chosen to cancel this action
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Microsoft SQL Server to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Microsoft SQL Server.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Uninstall to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_Windows_CurrentVersion_Uninstall.reg_
2009-11-17 21:06:26 Slp: Sco: Attempting to write hklm registry key SOFTWARE\Wow6432Node\Microsoft\MSSQLServer to file C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20091117_204850\Registry_SOFTWARE_Wow6432Node_Microsoft_MSSQLServer.reg_
2009-11-17 21:06:47 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp: Watson bucket for exception based failure has been created
2009-11-17 21:06:47 SSIS: Failed to set registry permission on key 'SOFTWARE\Microsoft\Microsoft SQL Server\100\SSIS' to SID 'S-1-5-21-2556463381-1186548668-390171815-1029'. Error: 'Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.'
2009-11-17 21:06:47 Slp: Sco: Attempting to open registry subkey SOFTWARE\Microsoft\Windows NT\CurrentVersion\Perflib
2009-11-17 21:06:47 Slp: ReplaceAccountWithSidInSddl -- SDDL to be returned: D:(A;OICI;KR;;;S-1-5-21-2556463381-1186548668-390171815-1029)(A;CI;KR;;;LU)(A;CI;KR;;;MU)
2009-11-17 21:06:47 Slp: Prompting user if they want to retry this action due to the following failure:
2009-11-17 21:06:47 Slp: ----------------------------------------
2009-11-17 21:06:47 Slp: The following is an exception stack listing the exceptions in outermost to innermost order
2009-11-17 21:06:47 Slp: Inner exceptions are being indented
2009-11-17 21:06:47 Slp:
2009-11-17 21:06:47 Slp: Exception type: Microsoft.SqlServer.Configuration.Sco.ScoException
2009-11-17 21:06:47 Slp: Message:
2009-11-17 21:06:47 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp: Data:
2009-11-17 21:06:47 Slp: WatsonData = Perflib
2009-11-17 21:06:47 Slp: DisableRetry = true
2009-11-17 21:06:47 Slp: Inner exception type: System.UnauthorizedAccessException
2009-11-17 21:06:47 Slp: Message:
2009-11-17 21:06:47 Slp: Es wurde versucht, einen nicht autorisierten Vorgang auszuführen.
2009-11-17 21:06:47 Slp: Stack:
2009-11-17 21:06:47 Slp: bei System.Security.AccessControl.Win32.GetSecurityInfo(ResourceType resourceType, String name, SafeHandle handle, AccessControlSections accessControlSections, RawSecurityDescriptor& resultSd)
2009-11-17 21:06:47 Slp: bei System.Security.AccessControl.NativeObjectSecurity.CreateInternal(ResourceType resourceType, Boolean isContainer, String name, SafeHandle handle, AccessControlSections includeSections, Boolean createByName, ExceptionFromErrorCode exceptionFromErrorCode, Object exceptionContext)
2009-11-17 21:06:47 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity..ctor(ResourceType resourceType, SafeRegistryHandle handle, AccessControlSections includeSections)
2009-11-17 21:06:47 Slp: bei Microsoft.SqlServer.Configuration.Sco.SqlRegistrySecurity.Create(InternalRegistryKey key)
2009-11-17 21:06:47 Slp: bei Microsoft.SqlServer.Configuration.Sco.InternalRegistryKey.SetSecurityDescriptor(String sddl, Boolean overwrite)
2009-11-17 21:06:47 Slp: ----------------------------------------
2009-11-17 21:06:52 Slp: User has chosen to cancel this action -
Help,
setup a new sql server 2012 on a windows 2012r2 server to replace old sql server 2005 on an old windows server 2003 machine. When i test the ODBC connection locally on the server it works fine, however when i try to connect via windows 7 client machine
i get the following error:
Connection failed:
SQLState:'01000'
SQL Server Error:67
[Microsoft]ODBC SQL Server Driver][DBNETLIB]ConnectionOpen
(Connect()).
Connection failed:
SQLState:'08001'
SQL Server Error:17
[Microsoft]ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied
I think it must be a permissions thing, I've turned off the firewall for now and still no difference, 've also made sure remote connection is enabled. I can connect to the other sql server in studio manager on the new machine however, i can't go do
the same in the old server, says:
cannot connect to hbfsqlpro1\hbfsqlpro1
Additonal information a network related or instance specifc error occured while establising a connection to SQL server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL server is configured to
allow remote connections. (provider:SQL Network Interfaces, error 26 - error locationg server/instance specified) (Microsoft SQL server)
the instance is def correct, as that is what i use to connect locally on the new machine and what it comes up on the studio manager on the new machine. STarting to pull my hair out somewhat, i'm sure it's something really simple!Hello,
You are trying to connect to a named instance. Make sure the SQL Server Browser service is started on the SQL Server computer.
Make sure TCP/IP is enabled.
http://msdn.microsoft.com/en-us/library/ms191294(v=sql.110).aspx
Try to disable Windows Firewall or security software on both, SQL Server instance and client computer.
Test basic connectivity too. Try to ping from the client computer to the SQL Server computer.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
SQL Server 2014 Express Installation Failure
Hi,
Now trying to install SQL Server 2014 Express on my work machine. Here is the error log. Any ideas? The error help link is useless.
Overall summary:
Final result: Failed: see details below
Exit code (Decimal): -2061893606
Start time: 2014-06-19 16:24:17
End time: 2014-06-19 16:38:03
Requested action: Install
Setup completed with required actions for features.
Troubleshooting information for those features:
Next step for RS: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for SQLEngine: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for FullText: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Next step for Replication: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Machine Properties:
Machine name: PC12345
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered Configured
Package properties:
Description: Microsoft SQL Server 2014
ProductName: SQL Server 2014
Type: RTM
Version: 12
SPLevel: 0
Installation location: C:\Scott\Software\SQLEXPRADV_x64_ENU\x64\setup\
Installation edition: Express
Product Update Status:
None discovered.
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: true
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSERVERMODE: MULTIDIMENSIONAL
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: <empty>
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CLTCTLRNAME: <empty>
CLTRESULTDIR: <empty>
CLTSTARTUPTYPE: 0
CLTSVCACCOUNT: <empty>
CLTSVCPASSWORD: <empty>
CLTWORKINGDIR: <empty>
COMMFABRICENCRYPTION: 0
COMMFABRICNETWORKLEVEL: 0
COMMFABRICPORT: 0
CONFIGURATIONFILE:
CTLRSTARTUPTYPE: 0
CTLRSVCACCOUNT: <empty>
CTLRSVCPASSWORD: <empty>
CTLRUSERS: <empty>
ENABLERANU: true
ENU: true
ERRORREPORTING: false
FEATURES: SQLENGINE, REPLICATION, FULLTEXT, RS, CONN, BC, SDK, BOL, SSMS, ADV_SSMS, LOCALDB
FILESTREAMLEVEL: 2
FILESTREAMSHARENAME: MSSQLSERVER
FTSVCACCOUNT: NT Service\MSSQLFDLauncher
FTSVCPASSWORD: <empty>
HELP: false
IACCEPTSQLSERVERLICENSETERMS: true
INDICATEPROGRESS: false
INSTALLSHAREDDIR: C:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: C:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: C:\SQL Server Data
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: MSSQLSERVER
INSTANCENAME: MSSQLSERVER
ISSVCACCOUNT: NT AUTHORITY\Network Service
ISSVCPASSWORD: <empty>
ISSVCSTARTUPTYPE: Automatic
MATRIXCMBRICKCOMMPORT: 0
MATRIXCMSERVERNAME: <empty>
MATRIXNAME: <empty>
NPENABLED: 0
PID: *****
QUIET: false
QUIETSIMPLE: false
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSHPINSTALLMODE: DefaultSharePointMode
RSSVCACCOUNT: NT Service\ReportServer
RSSVCPASSWORD: <empty>
RSSVCSTARTUPTYPE: Automatic
SAPWD: <empty>
SECURITYMODE: <empty>
SQLBACKUPDIR: <empty>
SQLCOLLATION: Latin1_General_CI_AS
SQLSVCACCOUNT: NT Service\MSSQLSERVER
SQLSVCPASSWORD: <empty>
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: INTERNAL\sbass
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: false
TCPENABLED: 0
UIMODE: AutoAdvance
UpdateEnabled: true
UpdateSource: MU
USEMICROSOFTUPDATE: false
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140619_162416\ConfigurationFile.ini
Detailed results:
Feature: Management Tools - Complete
Status: Passed
Feature: Client Tools Connectivity
Status: Passed
Feature: Client Tools SDK
Status: Passed
Feature: Client Tools Backwards Compatibility
Status: Passed
Feature: Management Tools - Basic
Status: Passed
Feature: Reporting Services - Native
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Database Engine Services
Status: Failed: see logs for details
Reason for failure: An error occurred during the setup process of the feature.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: Full-Text and Semantic Extractions for Search
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Server Replication
Status: Failed: see logs for details
Reason for failure: An error occurred for a dependency of the feature causing the setup process for the feature to fail.
Next Step: Use the following information to resolve the error, uninstall this feature, and then run the setup process again.
Component name: SQL Server Database Engine Services Instance Features
Component error code: 0x851A001A
Error description: Wait on the Database Engine recovery handle failed. Check the SQL Server error log for potential causes.
Error help link: http://go.microsoft.com/fwlink?LinkId=20476&ProdName=Microsoft+SQL+Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=12.0.2000.8&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026&EvtType=0xD15B4EB2%400x4BDAF9BA%401306%4026
Feature: SQL Browser
Status: Passed
Feature: Documentation Components
Status: Passed
Feature: SQL Writer
Status: Passed
Feature: LocalDB
Status: Passed
Feature: Setup Support Files
Status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\120\Setup Bootstrap\Log\20140619_162416\SystemConfigurationCheck_Report.htmThanks Shanky, that fixed my issue. I reinstalled, specifying NT AUTHORITY\LOCALSYSTEM for the SQL Server Database Engine account. After the successful installation, I used Sql Server Configuration Manager to change the account to LocalService
(NT AUTHORITY\LocalService). The Database Engine is restarting OK.
So, my accounts are:
SQL Server (MSSQLSERVER): NT AUTHORITY\LocalService
SQL Full-text Fiter Daemon Launcher (MSSQLSERVER): NT Service\MSSQLFDLauncher
SQL Server Reporting Services (MSSQLSERVER): NT Service\ReportServer
SQL Server Browser: NT AUTHORITY\LOCALSERVICE
SQL Server Agent (MSSQLSERVER): NT AUTHORITY\NETWORKSERVICE
I check out the link http://msdn.microsoft.com/en-us/library/ms143504.aspx#Serv_Perm. I'm a bit confused how the NT Service\* accounts are created, such as NT Service\MSSQLSERVER. However, I did see this http://msdn.microsoft.com/en-us/library/ms191153.aspx#manual;
perhaps I need to read it further.
Regardless, this is my desktop machine, the installation is for development only, it's inside our network, and no external users will be accessing this SQL Server instance. So, while I haven't fully read the details on running under LocalService, I
believe this will meet my needs.
Thanks again for your help. -
SCOM 2012 R2 installtion wizard not able to contact SQL server cluster
Hi,
This is about the error faced while installing SCOM 2012 R2.
My customer has SQL 2012 SP1 cluster installed. I am trying to install the SCOM 2012 R2 with this installed SQL cluster. The SQL cluster is installed with default instance and with AAG (Always on Availability Group).
The edition of SQL server is, SQL Server Enterprise edition with SP1
After check services on both the SQL nodes found that SQL Full text is not installed (as the related SQL Full text service not present in the services.msc) on any of the SQL cluster node & SQL Browser service is not running.
The running services for SQL are, SQL Server (MSSQLSERVER) & SQL Server Agent (MSSQLSERVER).
When I started to install the SCOM 2012 R2, Within a SCOM 2012 wizard, On the Configure the Operational Database screen, entered only the name of SQL cluster & no instance as it is with default instance MSSQLSERVER.
I faced error as, This SQL Server could not be found.
After installed SQL full text, the service is showing in services.msc as "SQL Full-text Filter Daemon Launcher (MSSQLSERVER)".
Now when I started to install the SCOM 2012 R2, Within a SCOM 2012 wizard, On the Configure the Operational Database screen, entered only the name of SQL cluster & no instance as it is with default instance MSSQLSERVER.
I faced error as, The installed version of SQL Server could not be verified or is not supported.
Followings test carried out for the connectivity between SCOM 2012 MS &SQL Cluster
Ping SQL Cluster successfully
Telnet SQL Cluster for port 1433 successfully
Tracert SQL Cluster – completed successfully with single hops.
The windows firewall is off on both sides
The SQL services running on the Active node 1 of the cluster are as follows:
SQL Full Text Filter Daemon Launcher (MSSQLSERVER) -- Running & Manual
SQL Server (MSSQLSERVER) -- Running & Automatic
SQL Server Agent (MSSQLSERVER) -- Running & Automatic
SQL serve Browser - Stopped & Manual
SQL Server VSS Writer -- Running & Automatic
The SQL services running on the Passive node 2 of the cluster are as follows:
SQL Full Text Filter Daemon Launcher (MSSQLSERVER) -- Running & Manual
SQL Server (MSSQLSERVER) -- Running & Automatic
SQL Server Agent (MSSQLSERVER) -- Stopped & Automatic
SQL serve Browser - Stopped & Manual
SQL Server VSS Writer -- Running & Automatic
The SQL Server Agent (MSSQLSERVER) service is not running on the second node. It is running only on first node which is active.
The account used to install SCOM has the local admin privilege on the SQL server
To ping the cluster use the cluster name & it solved the whole FQDN of cluster in ping result. When ping with IP address with -a it not resolve to name.
Is any one can provide their valuable inputs.
Regards,
SandeepKHi SandeepK,
Before Installing Operations Manager on an availability group, please
1. Make sure to use the Group listener Name and port when installing Operations Manager for the databases that are going to be added to the availability databases.
2. The first management server will use the Group listener to get the primary SQL instance, and will install the databases on that instance.
System Requirements: System Center 2012 R2 Operations Manager
http://technet.microsoft.com/en-us/library/dn249696.aspx#BKMK_ClusterConfig
Niki Han
TechNet Community Support
Maybe you are looking for
-
Missing Port Information - HELP!
Hi, i built a dynamic client to work with my webservice. Both were built using the JWSP1.2. Bellow is the error i get. It happens only if i call the getAll WS method (this method receives a String parameter and returns a Source Type Object) . Does an
-
Problem in JFreeChart to display the value of the axies????
Hi!!! I have about 500 points, and I display with setValue. The problem is that I can't see the value below the graph, like this picture : http://putfile.com/pic.php?pic=8/23007045084.jpg&s=x1 Is there a solution to not display all the value (for ins
-
Access a supertype's delegated subtype
Hi all, R/3 4.6c. I have a SAP standard object with many subtypes and want to add components that are common to all subtypes. So, extending the supertype would be the cleanest option, but delegation does not get inherited. In pictures: SUPERTYPE -->
-
I am testing an iOS app developed by my team. When I tried to update the new version, I kept receiving the "Will Install" status. What do I have to do to get it installed as soon as I sync the device? If I have to wait for whatever reasons, how lo
-
Hi all, i recently aquired an iphone, however, i found out that there was no camera installed on it. help?