Srvctl remove listener

Hi,
I try to cleanup my Cluster according to Metalink
Steps to Remove Node from Cluster When the Node Crashes Due to OS/Hardware Failure and cannot boot up [ID 466975.1]
Oracle Version: 10.2.0.4
Problem:
srvctl remove listener
seems to be unknown to system - looks like that srvctl does not know the object: listener
oracle@node1:/crs_home/bin> srvctl remove listener ora.node2.LISTENER_node2.lsnr
Usage: srvctl <command> <object> [<options>]
oracle@node1:/crs_home/bin> srvctl remove listener
Usage: srvctl <command> <object> [<options>]
oracle@node1:/crs_home/bin>
But in the HELP it shows the object listener
oracle@node1:/crs_home/bin> srvctl remove
Usage: srvctl <command> <object> [<options>]
command: enable|disable|start|stop|relocate|status|add|remove|modify|getenv|setenv|unsetenv|config
objects: database|instance|service|nodeapps|asm|_listener_
For detailed help on each command and object and its options use:
srvctl <command> <object> -h
oracle@node1:/crs_home/bin>
Question:
Is it also possible to use crs_unregister to remove the listener ?
From the Metalink document:
The srvctl remove listener command used below is only applicable in 10204 and higher releases including 11.1.0.6. The command will report an error if the clusterware version is less than 10204. If clusterware version is less than 10204, use netca to remove the listener
But I have version 10.2.0.4 - and netca won´t delete the listener, because the maschines are not available
Christian

Hi,
I cannot remove the listener and vip entries
node1:/oracle/product/10.2.0/db_1/bin # ./srvctl remove nodeapps -n node3
Please confirm that you intend to remove the node-level applications on node node3 (y/[n]) y
PRKO-2112 : Some or all node applications are not removed successfully on node: node3
node1:/oracle/product/10.2.0/db_1/bin # exit
logout
oracle@node1:/crs_home/bin> ./crs_stat -t
Name Type Target State Host
ora.feuer.db application ONLINE ONLINE node1
ora....r1.inst application ONLINE ONLINE node1
ora....SM1.asm application ONLINE ONLINE node1
ora....C1.lsnr application ONLINE ONLINE node1
ora.node1.gsd application ONLINE ONLINE node1
ora.node1.ons application ONLINE ONLINE node1
ora.node1.vip application ONLINE ONLINE node1
ora....C2.lsnr application OFFLINE OFFLINE
ora.node2.vip application OFFLINE OFFLINE
ora....C3.lsnr application OFFLINE OFFLINE
ora.node3.vip application OFFLINE OFFLINE
oracle@node1:/crs_home/bin>

Similar Messages

Problem removing Listener Service in Clusterware 11g

It appears that I already have a listener service as shown below, and I am having problem removing this service so that I can create another. I know that I can just add a new listener service for each node, though if anyone would share some insight on how I can remove this listener service ofr Oracle 11g Clusterware with two node cluster, I would appreciate your insight. Thanks
rac1.respecti.com>./crs_resources.sh
HA Resource Target State
ora.rac1.gsd ONLINE ONLINE on rac1
ora.rac1.ons ONLINE ONLINE on rac1
ora.rac1.rac1.lsnr ONLINE ONLINE on rac1
ora.rac1.vip ONLINE ONLINE on rac1
ora.rac2.gsd ONLINE ONLINE on rac2
ora.rac2.ons ONLINE ONLINE on rac2
ora.rac2.rac2.lsnr ONLINE ONLINE on rac2
ora.rac2.vip ONLINE ONLINE on rac2
rac1.respecti.com>srvctl remove listener -n rac1 -l rac1
PRKO-2203 : Listener is running on node: rac1
rac1.respecti.com>srvctl stop listener -n rac1
CRS-0210: Could not find resource 'ora.rac1.LISTENER_RAC1.lsnr'.
rac1.respecti.com>

Hi, Is there any tnslsnr process running on the node. To understand the problem better, enable the debug trace for the .lsnr resource. You can enable trace by executing the following command as root.
crsctl debug log res "ora.rac1.LISTENER_RAC1.lsnr:5"
crsctl debug log crs "CRSRTI:1,CRSCOMM:2,OCRSRV:4"
Try to stop the listener.
Examine the log files under CRS_HOME/log/$HOST/crsd/* and CRS_HOME/log/$HOST/racg/*
Thanks & Regards
-Harish Kalra

Srvctl start listener - ERROR

Hi All,
We need at add new listener with new port to cluster, while adding iam getting this error
DB VERSION : 11.2.0.3
from ORACLE_HOME/bin directory
[oracle@cisssna01sora81 bin]$ ./srvctl add listener -l LISTENER_TEST -p 1559 -o /app/oracle/product/11.2.0/dbhome_1
PRCN-2061 : Failed to add listener ora.LISTENER_TEST.lsnr
PRCN-2065 : Port(s) 1559 are not available on the nodes given
PRCN-2067 : Port 1559 is not available across node(s) "node1"
Please advise me on this.

Same link i attached you the other day:
How to Configure A Second Listener on a Separate Network in 11.2 Grid Infrastructure (Doc ID 1063571.1)
why didn't you read it?

Srvctl start listener -n rac1 gives CRS-1028 and CRS-0223

Boot up 2 linux 10.2.0.1.0 RAC nodes.
everything starts except listeners
srvctl start listener -n rac1
or
srvctl start listener -n rac2
gives
CRS-1028
CRS-0223
However, if you start listeners manually, using
lsnrctl start listener_rac1
or
lsnrctl start listener_rac2
they start right up. Moreover, once you have started them manually, the srvctl start listener commands now work, both stopping and starting the listeners with srvctl now works. However, when reboot systems, again srvctl must be "primed" for starting listener by doing one "manual" startup of listener.
Any thoughts on what is causing this behavior?
Thanks!

Alan, thanks - excellent advice. However, I just ended up redoing the entire install and this of course fixed the problem :-)
Thanks for your reply, Gil
PS also, btw I use the crsstat script instead of the crs_stat for better formatting, i.e. this script (which I named crsstat) lives in $ORA_CRS_HOME/bin. Also, note I am not the author of this script, I downloaded it from Metalink:
#!/usr/bin/ksh
# Sample 10g CRS resource status query script
# Description:
# - Returns formatted version of crs_stat -t, in tabular
# format, with the complete rsc names and filtering keywords
# - The argument, $RSC_KEY, is optional and if passed to the script, will
# limit the output to HA resources whose names match $RSC_KEY.
# Requirements:
# - $ORA_CRS_HOME should be set in your environment
RSC_KEY=$1
QSTAT=-u
AWK=/usr/bin/awk # if not available use /usr/bin/awk
# Table header:echo ""
$AWK \
'BEGIN {printf "%-45s %-10s %-18s\n", "HA Resource", "Target", "State";
printf "%-45s %-10s %-18s\n", "-----------", "------", "-----";}'
# Table body:
$ORA_CRS_HOME/bin/crs_stat $QSTAT | $AWK \
'BEGIN { FS="="; state = 0; }
$1~/NAME/ && $2~/'$RSC_KEY'/ {appname = $2; state=1};
state == 0 {next;}
$1~/TARGET/ && state == 1 {apptarget = $2; state=2;}
$1~/STATE/ && state == 2 {appstate = $2; state=3;}
state == 3 {printf "%-45s %-10s %-18s\n", appname, apptarget, appstate; state=0;}'

Srvctl status listener not wkng for 10g DB on 11g cluster

Hi Friends,
I am using Oracle 11g (11.2.0.2) cluster and on which 10g database(10.2.0.2) database and listener is registered.
I have a problem in using srvctl (10g) to check the listener status.It's throwing error but i am able to start and stop listsner service using srvctl:
bash-3.00$ which srvctl
/oraho/ora10g/product/10.2.0/db_1/bin/srvctl
bash-3.00$
bash-3.00$ ps -ef | grep tns
grid 4528 1 0 May 31 ? 0:13 /orapdpw/app/oracle/product/11.2.0/grid/bin/tnslsnr LISTENER_SCAN3 -inherit
grid 4537 1 0 May 31 ? 0:13 /orapdpw/app/oracle/product/11.2.0/grid/bin/tnslsnr LISTENER_SCAN2 -inherit
grid 4531 1 0 May 31 ? 0:13 /orapdpw/app/oracle/product/11.2.0/grid/bin/tnslsnr LISTENER -inherit
oraho 11336 1 0 15:59:05 ? 0:00 /oraho/ora10g/product/10.2.0/db_1/bin/tnslsnr HOLISTENER_JXR12DB1 -inherit
bash-3.00$
bash-3.00$
bash-3.00$ srvctl status listener -l HOLISTENER_JXR12DB1
Usage: srvctl <command> <object> [<options>]
bash-3.00$
bash-3.00$ srvctl status listener -l HOLISTENER_JXR12DB1 -n JXR12DB1
Usage: srvctl <command> <object> [<options>]
I even tried as grid user but same error
But i could able to use
srvctl start listener -l HOLISTENER_JXR12DB1 -n JXR12DB1 and
srvctl stop listener -l HOLISTENER_JXR12DB1 -n JXR12DB1
I could use the srvctl status for DB and it's working fine
bash-3.00$ srvctl status database -d HOTEST
Instance HOTEST1 is running on node jxr12db1
Instance HOTEST2 is running on node jxr12db2
Please let me know the reason
Regards,
DB

Hello DB
10g syntax does not support "srvctl status listener". See this URL:
http://docs.oracle.com/cd/B19306_01/rac.102/b14197/srvctladmin.htm#i1009882
Cheers
Riyaj Shamsudeen
Blog: http://orainternals.wordpress.com/
Oracle ACE Director and OakTable member http://www.oaktable.com
Advanced RAC seminar | http://www.orainternals.com/services/training/advanced-rac-training/

Problem removing listener after reload

Note: Using AS2, Flash 8
Here's the setup:
I'm developing a small game based on Wheel of Fortune. The
.swf for the game is loaded into another flash application on
another developer's end. Their application is build like a
slideshow. (switching from one .swf to the next, one of which is my
game)
I have a "board" of letter spaces and an input text field for
guessing the phrase.
The user can either hit letter keys to guess letters on the
board OR click in the input field and guess the phrase. The input
field has onSetFocus and onKillFocus function to prevent both
happening at the same time. Once a user has entered text in the
field, they can either hit a button or press enter to check if it's
the right answer.
Attached at the bottom is a simplified example of the
listeners for key presses and the input field's functions:
Thankfully, all this code works fine, but only the first time
around. If you go back to the game again, it doesn't work the same:
If you start typing in the input field, letters pop up on the board
too. (Which, of course, is not supposed to happen)
I've been able to test this by testing the movie (Ctrl-Enter)
and then hitting Ctrl-Enter again to reload.
After doing a trace(Key._listeners.length); I get 1 the first
time and 2 the second time.
What this tells me is that on the second time around, even
though the input_txt.onSetFocus function should be removing the
keyListener, the keyListener.onKeyDown function is still executing
because there are now 2 keyListeners. (1 is removed, but the other
continues to execute)
I've tried attempting to remove the keyListener before any of
the code above executes, but it seems to have no effect.
How is it possible for there to be 2 listeners by the same
name?
How do I make sure that there is only one listener active?

This is an interesting problem. The Key._listener array must
still live in the cache while Flash is in operation, it seems if
you close down the program and then reopen (like if you shut down
the browser and came back) this doesn't happen, but on reload it
most certainly does.
I have a solution for you. Loop through the array and remove
all registered listeners on reload, place the code below previous
to the registering of the 'keyListener' object:
Hey, what did I win! ;)

Add listener / remove listener

hi,
when I add a listener on a clip or button (like the CLICK Event) that exists in the timeline do I allways have to remove the listener if the Clip is removed from stage? Or will it be removed automaticly by the garbage collection?
TIA

It will only be removed automatically if you use a weak reference:
clip.addEventListener(MouseEvent.CLICK, clickHandler, false, 0, true); //weak ref
vs:
clip.addEventListener(MouseEvent.CLICK, clickHandler); //strong ref
the second version is only removed if you removeEventListener on it.

Removing listener services: Windows 2000/XP

How can i remove a listener service. If you remove it from the net manager, the service stays behind. Currently i have 4 services. I want to delete 3 of them
Rudy

Rudolph
You can you a third party utility to delete any Windows NT Service
download from here
http://www.quiver.freeserve.co.uk/binaries/ServiceEnum.zip
Regards
Sunil

Remove Listener in C#

Hi,
in C# I add listeners like this
oApp.ItemEvent += new SAPbouiCOM._IApplicationEvents_ItemEventEventHandler(HandleItemEvent);
this works.
To remove the listener I use
SAPbouiCOM._IApplicationEvents_ItemEventEventHandler.Remove(HandleItemEvent);
but it wants a second parameter.
What does this parameter mean, or should I use another method to remove the listener.
Thanks,
Ad

I haven't tested this, however I think one of the following should work (using the -= operator instead or +=)
oApp.ItemEvent -= new SAPbouiCOM._IApplicationEvents_ItemEventEventHandler(HandleItemEvent);
or
oApp.ItemEvent -= new HandleItemEvent;

Removing listened to audio books

Hi how on earth do I remove a already listened to book off my ipod ( i have a 2nd generation click wheel)thanks inadvance for anyones help! [email protected]

Perhaps you didn't understand what I said.
If you want the podcasts you've already listened to stay on your iPod, then set your syncing preferences for Podcasts in iTunes to Sync All. (Instead of Sync New...as I said before.) If your preferences are not set this way, then once you listen to a podcast, even for a few seconds, when you re-sync, it will drop off your iPod. Set syncing preferences to SYNC ALL. Then it will keep all of your podcasts synced to the iPod, regardless of whether they are old or new, listened to or not. Also...make sure they have a checkmark in the little box next to them in iTunes.
I'm not sure what you mean by there being no way to delete an Audio podcast. In your iTunes, just highlight the podcast you want to delete and hit the delete key on your keyboard.

Adcfgclone.pl dbTechStack on Target DB removes listener and tnsnames files

Hello:
I am doing a first-time clone from my PRD to my TST instance, and have undergone the following steps:
1. perl adpreclone.pl dbTier on Source DB
2. perl adpreclone.pl appsTier on Source AppTier
3. Copy APPL_TOP, COMMON_TOP, ORACLE_HOME, IAS_ORACLE_HOME from Source AppTier to Target AppTier.
4. Run perl adcfgclone.pl dbTechStack on Target DB.
At this point is where I start running into issues. The dbTechStack deletes/recreates the tnsnames.ora, sqlnet.ora, and listener.ora files, and the DB can no longer startup. The below is in the logfiles. Am I doing something wrong? I guess the issue is not so much with it deleting/recreating the files, as it is with the values it puts into the files (i.e. DB port = 3001)
Executing Technology Stack Configuration...
Executing runAutoConfig...
Deleting files of type INSTALL
Checking for file: /u01/oracle/WMSTST/db/tech_st/11.1.0/network/admin/WMSTST_x07tst00/sqlnet.ora
File exists
File deleted
Processing driver file: /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/template/addbtmpl.drv
Checking for file: /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/install/WMSTST_x07tst00/txkConfigDbOcm.pl
File exists
File deleted
Checking for file: /u01/oracle/WMSTST/db/tech_st/11.1.0/dbs/initWMSTST.ora
File exists
File deleted
Checking for file: /u01/oracle/WMSTST/db/tech_st/11.1.0/network/admin/WMSTST_x07tst00/listener.ora
File exists
File deleted
Checking for file: /u01/oracle/WMSTST/db/tech_st/11.1.0/network/admin/WMSTST_x07tst00/tnsnames.ora
File exists
File deleted
Testing for RAC specific parameters before running autoconfig
No RAC specific parameters were found, running with CVM
Starting CVM in INSTE8_SETUP mode
Using Context file : /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/WMSTST_x07tst00.xml
Attempting to create a back up of the Context file
Created back up file of name :
/u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/out/WMSTST_x07tst00/12111155/WMSTST_x07tst00.xml
===========================================================================
Starting synchronization of file system Context file and its templates with those in the database
Database connection : Failed
OAM Context editing support feature: Unverified
OAM Customization support feature : Unverified
File system template : /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/template/adxdbctx.tmp
Checking for customizations to Context template
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations.
Looking for custom template at : /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/template/custom/adxdbctx.tmp
Custom template : Not available
Customizations found : None
File system Context file :/u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/WMSTST_x07tst00.xml
Checking the Context file for possible updates from the Database
Warning: Unable to connect to Database.
If the system is OAM enabled, this may result in loss of customizations and the Context files in DataBase and in the file system may be unsynchronized
Thanks!
Edited by: user4434301 on Dec 11, 2012 12:39 PM

Excellent. I copied the template file from another instance and the following messages were at the end of the logfile:
Skipping Profile Phase
Skipping Apply Phase
Completed runAutoConfig...
ApplyDBTechStack Completed Successfully.
However I'm not completely certain this is entirely correct preclone. Can you tell me why the Profile and Apply Phases were skipped and why the following was displayed upon the screen on completion?
Completed Apply...
Tue Dec 18 11:25:39 2012
Starting database listener for WMSTST:
Running:
/u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/scripts/WMSTST_x07tst00/addlnctl.sh start WMSTST
Logfile: /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/log/WMSTST_x07tst00/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process WMSTST ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 18-DEC-2012 11:25:39
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u01/oracle/WMSTST/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u01/oracle/WMSTST/db/tech_st/11.1.0/network/admin/WMSTST_x07tst00/listener.ora
Log messages written to /u01/oracle/WMSTST/db/tech_st/11.1.0/log/diag/tnslsnr/x07tst00/wmstst/alert/log.xml
TNS-01151: Missing listener name, WMSTST, in LISTENER.ORA
Listener failed to start. See the error message(s) above...
addlnctl.sh: exiting with status 1
addlnctl.sh: check the logfile /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/log/WMSTST_x07tst00/addlnctl.txt for more information ...
That file shows the following:
Starting database listener for WMSTST:
Running:
/u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/scripts/WMSTST_x07tst00/addlnctl.sh start WMSTST
Logfile: /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/log/WMSTST_x07tst00/addlnctl.txt
You are running addlnctl.sh version 120.1.12010000.4
Starting listener process WMSTST ...
LSNRCTL for Linux: Version 11.1.0.7.0 - Production on 18-DEC-2012 11:25:39
Copyright (c) 1991, 2008, Oracle. All rights reserved.
Starting /u01/oracle/WMSTST/db/tech_st/11.1.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 11.1.0.7.0 - Production
System parameter file is /u01/oracle/WMSTST/db/tech_st/11.1.0/network/admin/WMSTST_x07tst00/listener.ora
Log messages written to /u01/oracle/WMSTST/db/tech_st/11.1.0/log/diag/tnslsnr/x07tst00/wmstst/alert/log.xml
TNS-01151: Missing listener name, WMSTST, in LISTENER.ORA
Listener failed to start. See the error message(s) above...
addlnctl.sh: exiting with status 1
addlnctl.sh: check the logfile /u01/oracle/WMSTST/db/tech_st/11.1.0/appsutil/log/WMSTST_x07tst00/addlnctl.txt for more information ...
Should I have stopped the DB or listener before running the script?
Edited by: user4434301 on Dec 18, 2012 9:18 AM

Srvctl start listener

Dear,
the default for listener was in a RAC environment.
$ORACLE_HOME/network/admin
question:
i have moved the listener to a different location.
$ORACLE_HOME/network/admin/DB1
how can i change this location in CRS
which command should i use.
Thanks in advance!
Regards,

Hi,
I try simulate the same scenario on my test env...
carpa:/home/ora10g> cd $ORACLE_HOME/network/admin/
carpa:/u01/app/oracle/product/10.2.0/network/admin> mkdir teste
carpa:/u01/app/oracle/product/10.2.0/network/admin> mv listener.ora teste/
carpa:/u01/app/oracle/product/10.2.0/network/admin> echo $TNS_ADMIN
/u01/app/oracle/product/10.2.0/network/admin
carpa:/u01/app/oracle/product/10.2.0/network/admin> export TNS_ADMIN=/u01/app/oracle/product/10.2.0/network/admin/teste
carpa:/u01/app/oracle/product/10.2.0/network/admin> echo $TNS_ADMIN
/u01/app/oracle/product/10.2.0/network/admin/teste
carpa:/u01/app/oracle/product/10.2.0/network/admin> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 13-APR-2009 14:36:26
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.4.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/network/admin/teste/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.22.9)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.22.9)(PORT=1521)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Start Date 13-APR-2009 14:36:26
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/network/admin/teste/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.22.9)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "dsrj01.myjob.com" has 1 instance(s).
Instance "dsrj01", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
carpa:/u01/app/oracle/product/10.2.0/network/admin> lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 13-APR-2009 14:36:37
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.22.9)(PORT=1521)))
The command completed successfully
carpa:/u01/app/oracle/product/10.2.0/network/admin> export TNS_ADMIN=/u01/app/oracle/product/10.2.0/network/admin
carpa:/u01/app/oracle/product/10.2.0/network/admin> echo $TNS_ADMIN
/u01/app/oracle/product/10.2.0/network/admin
carpa:/u01/app/oracle/product/10.2.0/network/admin> lsnrctl start
LSNRCTL for Linux: Version 10.2.0.4.0 - Production on 13-APR-2009 14:36:52
Copyright (c) 1991, 2007, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Log messages written to /u01/app/oracle/product/10.2.0/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=carpa)(PORT=1521)))
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.4.0 - Production
Start Date 13-APR-2009 14:36:52
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Log File /u01/app/oracle/product/10.2.0/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=carpa)(PORT=1521)))
The listener supports no services
The command completed successfully
This is a listener without listener.ora, this is a default configuration, it happened cause
we move listener.ora from new location, now listener.ora is under $ORACLE_HOME/network/admin/teste/ ... Do you remeber?
Regards,
Rodrigo Mufalani
http://mufalani.blogspot.com

Remove Listener from emptyMovieClip?

Hi,
I have created several >emptyMovieClips< and have added
RollOver + RollOut functions.
How can I remove these functions.
The EMCs should still remain, but no RollOver effects.
Thank you for your help,
regards,
Luciewong

Hi,
Please, I must solve this issue.
I need to take the RollOver event away, because I want to
enter text into the EMC's text fields on a next frame.
I have some emptyMovieClips like this:>
this.holderSub_mc.createEmptyMovieClip(["sub1a_mc"+a],
(sub1adepth)+a);//
this.holderSub_mc["sub1a_mc"+a].createTextField(["sub1a_txt"],
(sub1adepth_txt)+a,sub1aX, sub1aY, sub1aW, sub1aH);
this.holderSub_mc["sub1a_mc"+a]["sub1a_txt"].type =
"dynamic";
this.holderSub_mc["sub1a_mc"+a]["sub1a_txt"].selectable =
false;
this.holderSub_mc["sub1a_mc"+a]["sub1a_txt"].text =
sub1_array[a];
for(var a:Number = 0;a<sub1L;a++){
this.holderSub_mc["sub1a_mc"+a].useHandCursor = true;//
this.holderSub_mc["sub1a_mc"+a].onRollOver = function(){
//>do something
this.holderSub_mc["sub1a_mc"+a].onRollOut = function(){
//>do something
But now, on a next Frame I need the Text field of the EMC
>editable< and >selectable< and
>type:”input”;
Therefore I n e e d to take away the EMC’s RollOver
effect.
I tried many things, like:
this.holderSub_mc["sub1a_mc"+a].useHandCursor = false;//
this.holderSub_mc["sub1a_mc"+a].onRollOver = null;
removeEventListener(this.holderSub_mc["sub1a_mc"+a],"onRollOver");//
this.holderSub_mc["sub1a_mc"+a].removeListener("onRollOver");//
But, still, nothing works, the EMCs have their RollOver and I
cannot enter into their Text field.
Thank you for your help.
Luciewong

Netca: "a listener with the name already exists" after bombing out

Installing a listener via netca on a CentOS 5 x64 11g RAC setup.
I had a typo in the $ORACLE_HOME shell variable in .bash_profile for the oracle user. This caused netca to bomb out with a series of 'file not found' and 'directory not found' errors. netca did not complete.
netca did, however, create listener LISTENER on port 1521 on both my nodes. There is no listener.ora file anywhere, due to the bad $ORACLE_HOME directory.
I'd like to delete this and start over so that netca completes normally.
I cannot use netca to delete listener LISTENER. The delete option is greyed out. I did reboot, and tried killing the tsnlsnr process.
crs_stat -p shows the following:
NAME=ora.rac1.LISTENER_RAC1.lsnr
TYPE=application
ACTION_SCRIPT=/u01/app/oracle/product/11.1.0/db_1/bin/racgwrap
ACTIVE_PLACEMENT=0
AUTO_START=1
CHECK_INTERVAL=600
DESCRIPTION=CRS application for listener on node
FAILOVER_DELAY=0
FAILURE_INTERVAL=0
FAILURE_THRESHOLD=0
HOSTING_MEMBERS=rac1
OPTIONAL_RESOURCES=
PLACEMENT=restricted
REQUIRED_RESOURCES=ora.rac1.vip
RESTART_ATTEMPTS=5
SCRIPT_TIMEOUT=600
START_TIMEOUT=600
STOP_TIMEOUT=600
UPTIME_THRESHOLD=7d
USR_ORA_ALERT_NAME=
USR_ORA_CHECK_TIMEOUT=0
USR_ORA_CONNECT_STR=/ as sysdba
USR_ORA_DEBUG=0
USR_ORA_DISCONNECT=false
USR_ORA_FLAGS=
USR_ORA_IF=
USR_ORA_INST_NOT_SHUTDOWN=
USR_ORA_LANG=
USR_ORA_NETMASK=
USR_ORA_OPEN_MODE=
USR_ORA_OPI=false
USR_ORA_PFILE=
USR_ORA_PRECONNECT=none
USR_ORA_SRV=
USR_ORA_START_TIMEOUT=0
USR_ORA_STOP_MODE=immediate
USR_ORA_STOP_TIMEOUT=0
USR_ORA_VIP=
My question...how do I delete this listener (and the one on rac2) so that I can re-install them correctly using netca?
Edited by: user611309 on Apr 21, 2009 12:12 PM

Hi,
the listener is still registered with Oracle Clusterware. This registration will stay regardless of the existence of listener.ora and related files. Thus, you need to get rid of the registration, if you want to do it from scratch (which may not be required, if the listener starts and stops correctly). However, from your Clusterware home, please, issue:
srvctl remove listener -h
Usage: srvctl remove listener -n <node_name> [-l <listener_name>]
-n <node> Node name
-l Display listener configuration
-h Print usage
Hope that helps. Thanks,
Markus

Can we remove a OS user after RAC decomission

Hi All,
I have a situation that we decommissioned a RAC environment long back and now I am trying to remove the user corresponding to that RAC environment at OS level.
here is the steps followed.
./crsctl delete serverpool ora.EBL
./srvctl remove listener -l LISTENER_EBL_L192
I able to delete serverpool and remove listener, but ,I am not able to restart the CRS services with below error,
2013-08-21 18:46:20.680: [ CRSSEC][1462204736] {1:61647:2} Exception: OwnerEntry construction failed to retrieve user id by name with ACL string: owner:eblval:rwx and error: 1
2013-08-21 18:46:20.680: [ CRSSEC][1462204736] {1:61647:2} Exception: ACL entry creation failed for: owner:eblval:rwx
Can we remove the user corresponding to the decommissioned RAC environment, I have 2 node cluster and another RAC environment is running on the same nodes.
it is EBS - RAC environment and CRS is 11.2.0 and DB is 10.2.0.4 with 11.5.10.2 EBS.
Please review my case and advise.
Thanks in advance,
Venkat

Thanks Rajiv for the information,
I will open the SR and have Oracle blessings on the same.
here the steps used.
1) Brought down the CRS and removed the user eblval
2) rebooted the server, which will restart the crs services
3) verified the CRS
[root@l191 bin]# ./crsctl start crs
CRS-4640: Oracle High Availability Services is already active
CRS-4000: Command Start failed, or completed with errors.
log file entry crsd.log
2013-08-21 18:42:54.961: [   CRSPE][3209136448] {1:53022:2} Reading (16) types
2013-08-21 18:42:55.091: [   CRSPE][3209136448] {1:53022:2} Reading (2) server pools
2013-08-21 18:42:55.301: [   CRSPE][3209136448] {1:53022:2} Reading (21) resources
2013-08-21 18:42:58.850: [   CRSPE][3209136448] {1:53022:2} Finished reading configuration. Parsing...
2013-08-21 18:42:58.850: [   CRSPE][3209136448] {1:53022:2} Parsing resource types...
2013-08-21 18:42:58.877: [ CRSSEC][3209136448] {1:53022:2} Exception: OwnerEntry construction failed to retrieve user id by name with ACL string: owner:eblval:rwx and error: 1
2013-08-21 18:42:58.890: [ CRSSEC][3209136448] {1:53022:2} Exception: ACL entry creation failed for: owner:eblval:rwx
2013-08-21 18:42:58.900: [    CRSD][3209136448] {1:53022:2} Dump State Starting ...
2013-08-21 18:42:58.900: [    CRSD][3209136448] {1:53022:2} State Dump for RTILock
2013-08-21 18:42:58.900: [    CRSD][3209136448] {1:53022:2} Lock State List is busy, skipping ..
2013-08-21 18:42:58.900: [   CRSPE][3209136448] {1:53022:2} Dumping PE Data Model...:DM has [0 resources][0 types][0 servers][0 spools]
4) Now recreated the user and able to bring up the CRS with no issues
Thanks,
Venkat

Srvctl remove listener

Similar Messages

Maybe you are looking for