SSD for Wife's computer
I have the idea that once I build my new computer next week (parts arrive Monday... i7-4930k using Samsung 840 Pro 256Gig SSD for boot) that she is going to want FASTER startup and program loading
The price difference between the Samsung ($200) and Crucial M550 ($150) is not that great at 256Gig... IF I can clone her 500Gig platter drive down to 256Gig (have to read at Samsung & Crucial)
The price difference between the Samsung ($420) and Crucial M550 ($245) is large at the 512Gig size
Her computer has an i7-3770 CPU so I'm wondering what benefits the Samsung would provide over the Crucial for $175 more?
>IF she doesn't say anything about my boot/loading speed
Well... so much for THAT thought!!! Crucial M550 CT512M550SSD1 2.5" 512GB SATA 6Gbps MLC Internal Solid State Drive (SSD) …
When she saw my "about" 2 seconds (not using a stop watch) from Win8 password to program is loaded and ready... her 1st words were something like "I Want!"
So, once I finish with my new computer and get my side of the office put back together (old computer goes in the box to sell) looks like I'll be ordering a Crucial M550 512Gig to replace her platter 500Gig boot drive
And the beat goes on...
Similar Messages
-
On my wife's computer, when she tries to launch Firefox in order to connect to the internet, a window pops up that says "Error launching browser window: no XBL binding for the browser. How do I fix this? I am not very computer literate so please don't use too much computer lingo. Thanks for your help.
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]
If it does work in Safe-mode then disable all your extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
You can use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
You have to close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit") -
I had to change the computer I have iTunes installed on, my iPhone is still looking for the old computer to sync over WiFi. How do I change the WiFi computer associated to my iPhone?
Hi Terri571,
Welcome to Apple Support Communities.
See these steps for setting up Wi-Fi syncing between your iPhone and new computer:
iOS: Syncing with iTunes
http://support.apple.com/kb/ht1386
Wi-Fi syncing
Open iTunes
To set up Wi-Fi syncing, connect your iOS device to your computer with the included USB cable. Select your device under Devices on the left-hand side.
In the Summary tab, select "Sync with this [device] over Wi-Fi".
Whenever the computer and the iOS device are on the same network, the iOS device will appear in iTunes, and you can sync it. The iOS device will sync automatically when all of the following are true:
The iOS device is plugged in to power
iTunes is open on the computer
The iOS device and the computer are on the same Wi-Fi network
While the iOS device appears in the left-hand column of iTunes, you can select the content tabs and configure sync options.
Click Apply or Sync to sync the iOS device.
If the iOS device does not appear in the Devices section or you are unable to sync, please see this article for troubleshooting.
Best,
Jeremy -
an update was sent to my wife's computer. she tried to use it ,but it would not open. the older version worked fine ,but it was erased by the upgrade. How do we get the old version back? the upgrade--yahoo_firefox_3.6_set_us.dmg-firefox will not open.
The last version of Firefox that works in OS 10.3 is Firefox 2.0.0.20, you can get it from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
-
Wife's Computer Keeps Periodically Rebooting Plus Can't Install HP Print Drivers
OS Version: Microsoft Windows 7 Home Premium, Service Pack 1, 64 bit
Processor: AMD A8-3820 APU with Radeon(tm) HD Graphics, AMD64 Family 18 Model 1 Stepping 0
Processor Count: 4
RAM: 5844 Mb
Graphics Card: AMD Radeon HD 6550D, 256 Mb
Hard Drives: C: Total - 940455 MB, Free - 854668 MB; H: Total - 305234 MB, Free - 177587 MB; I: Total - 7 MB, Free - 0 MB;
Motherboard: Gateway, SX2370
Antivirus: Norton Internet Security, Updated and Enabled
First, please excuse me if I've posted in the wrong forum and hopefully someone will direct me to the right one. I also apologize for the length of this but I've spent the last 5 days dealing with HP support and getting help from TechGuy.org. HP hasn't been
particularly helpful. Through TechGuy.org, we've eliminated the possibility that the problem I'm about to describe is related to a virus or malware.
As this is my wife's computer, I have no idea when this started happening, but at random intervals the computer would sometimes display the message "Windows has encountered a critical problem and will restart automatically in one minute. Please save
your work." Sometimes this error code accompanies the message "Error 1722 RPC Server is unavailable". Other times there is no warning and the system just reboots. At the same time, my wife began having problems with our HP Photosmart C410A printer.
In checking I saw that there was a new driver. When I attempted to install just the basic driver, the installation would stop and indicate that the Windows Firewall must be running. I disabled all of Norton Internet Services setting an tried to activate the
firewall. I would then get this error message: "Windows Firewall can't change some of your settings. Error code 0x800706d9".
HP suggested I uninstall Norton Internet Security, use the HP Driver Uninstall Utility and try a reinstallation using their complete software package while activation the Windows Firewall. I could get the firewall activated nor could I get the drivers installed.
I then removed all the HP software using their installer. However there still seems to be bits "floating" about. I reinstalled NIS.
TechGuy.org suggested that there might be a BIOS issue and there are two updates available. They also suggested I may have to wipe the drive and do a clean reinstallation of Windows 7. That just didn't sound right.
In checking the Event Viewer the following error show up repeatedly at random times, which also correspond, usually, with a reboot. Here is a partial copy of the log:
Log Name: System
Source: Microsoft-Windows-HAL
Date: 2/2/2015 6:58:01 AM
Event ID: 12
Task Category: None
Level: Error
Keywords: (1)
User: N/A
Computer: Johnny5
Description:
The platform firmware has corrupted memory across the previous system power transition. Please check for updated firmware for your system.
Log Name: System
Source: Service Control Manager
Date: 2/2/2015 5:36:27 AM
Event ID: 7034
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Johnny5
Description:
The Windows Firewall service terminated unexpectedly. It has done this 3 time(s).
Log Name: System
Source: Service Control Manager
Date: 2/2/2015 5:36:27 AM
Event ID: 7034
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Johnny5
Description:
The Diagnostic Policy Service service terminated unexpectedly. It has done this 3 time(s).
Log Name: System
Source: Service Control Manager
Date: 2/2/2015 5:36:27 AM
Event ID: 7034
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Johnny5
Description:
The Base Filtering Engine service terminated unexpectedly. It has done this 3 time(s).
Log Name: System
Source: Service Control Manager
Date: 2/2/2015 5:36:22 AM
Event ID: 7032
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Johnny5
Description:
The Service Control Manager tried to take a corrective action (Restart the service) after the unexpected termination of the Base Filtering Engine service, but this action failed with the following error:
An instance of the service is already running.
Log Name: Application
Source: Application Error
Date: 2/2/2015 5:36:22 AM
Event ID: 1000
Task Category: (100)
Level: Error
Keywords: Classic
User: N/A
Computer: Johnny5
Description:
Faulting application name: svchost.exe_MpsSvc, version: 6.1.7600.16385, time stamp: 0x4a5bc3c1
Faulting module name: ntdll.dll, version: 6.1.7601.18247, time stamp: 0x521eaf24
Exception code: 0xc0000005
Fault offset: 0x000000000002b20d
Faulting process id: 0x1098
Faulting application start time: 0x01d03eed074c1d96
Faulting application path: C:\Windows\system32\svchost.exe
Faulting module path: C:\Windows\SYSTEM32\ntdll.dll
Report Id: 794ae32f-aae0-11e4-bcc8-f80f4138c1b9
Log Name: System
Source: Service Control Manager
Date: 2/2/2015 5:31:17 AM
Event ID: 7023
Task Category: None
Level: Error
Keywords: Classic
User: N/A
Computer: Johnny5
Description:
The HP Network Devices Support service terminated with the following error:
The specified module could not be found.
Log Name: Microsoft-Windows-Dhcp-Client/Admin
Source: Microsoft-Windows-Dhcp-Client
Date: 2/2/2015 5:30:47 AM
Event ID: 1001
Task Category: Address Configuration State Event
Level: Error
Keywords:
User: LOCAL SERVICE
Computer: Johnny5
Description:
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x74DE2BE23268. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the
network address (DHCP) server.
Log Name: System
Source: Microsoft-Windows-DNS-Client
Date: 2/2/2015 9:33:30 AM
Event ID: 1014
Task Category: None
Level: Warning
Keywords:
User: NETWORK SERVICE
Computer: Johnny5
Description:
Name resolution for the name wpad.hsd1.ca.comcast.net timed out after none of the configured DNS servers responded.
Any and all help would be greatly appreciated as I am tired of getting the heavy sighs and evil eye from my spouse.
Doc ZHi Doc,
Yes you need to do a firmware driver update.
Here is the KB article regarding Event ID 12:
How to troubleshoot Event ID 12 with source Microsoft-Windows-HAL
Follow the user action part.
You may follow the article below to check the update driver:
Update a driver for hardware that isn't working properly
For Event ID 7034, check:
Event ID 7034: Service Terminated
Another thing is please check Windows Update settings, make sure you have Windows stay up-to-date.
Besides, for customer support, please ask in the forum below:
http://answers.microsoft.com/en-us/windows/forum/windows_7?tab=Threads
Best regards
Michael Shao
TechNet Community Support -
Today an Apple tech helped me 60 min ago. Although my wife and I have diff apple ID's, our music was mixing and syncin back and forth. The tech told me to create new comp user account for wife which I did. I wiped out everything on her ipod and signed in under her ID. When I tried to put it back I got a message that I couldn't download her purchased music for 90 days because there was another apple ID associated with my computer. Not sure wether that means mine or hers. What I am sure of is that I'm dead if I can't get her music back. Please help. Thanks, Craig
I can understand how that would be frustrating. If you created a brand new Apple ID for her, your Apple ID should not have been affected any more than anyone else's. They are as separate from one another as your Apple ID is from mine.
Since you just bought your MacBook Air, you can certainly contact AppleCare for this, and I encourage you to do so. They will straighten it out.
Until then, if you want to troubleshoot this on your own, sign in to your Apple ID here:
https://appleid.apple.com/
Click the blue "Manage your Apple ID" button. If it says it no longer exists or gives you other hassles, it's probably not worth your effort to pursue. Have Apple fix it.
Contact Apple starting with this link - never Google it: http://www.apple.com/support/
Navigate the pages as follows:
Under "Contact Us" click the blue "Contact Support" link
Click the blue "Get Started" button
Click "More Products & Services"
Click "Apple ID"
Click "iTunes Store, App Store or Mac App Store"
Continue with the appropriate options and choose the contact method most convenient for you. -
i have problem with my wifi in 4 S, i cant connect to any wifi itried resetting network setting and reset all setting but the result was the same, its only keeps searching for wifi and cant find any, itried to use OTHER but also didnt work.please help me???
If Join was on then your home wi-fi must be set to Non-Broadcast. If you did not set this up (maybe your provider did) then you will need to find the Network Name they used, and any password they used. The SSID is Security Set ID and to see more try http://en.wikipedia.org/wiki/SSID . Basically it is the name used to identify your router/network. A lot of times the installer will leave it set as LinkSys, or Broadcom or whatever the manufacturer set it as for default. Your best bet is to get whoever installed it to walk you through how they set it up, giving you id's and passwords so you can get in. HOWEVER, if you are not comfortable with this (if you set security wrong, etc.) you would be well ahead of the game to hire a local computer tech (networking) to get this working for you. You can also contact the vendor of your router and get help (if it is still in warranty), or at least get copies of the manuals as pdf files. Sorry I can't give you more help, I hope this gives you an idea where to go from here to find more.
-
I installed a new SSD drive in my computer and now Adobe Creative Suite Web Premium says I don't have a license. I have license. It was very expensive. I am disabled now, and I need this software working. Adobe Acrobat has been a primary tool for accommodating memory problems after a brain injury. (A car ran me down while I was out getting exercise.) I installed the SSD because I needed my management of PDF files to run faster. I called tech support for help when the software first stopped working, but they needed me to give them a number from my original disks. Because of my disability, I've been having someone come in to clean, and the shelves where I kept my software packages were cleared. I've been hunting for them ever since, but I can't look for them myself for very long at a time. Today I finally found them, but now I can't seem to contact tech support. What happened? I don't want to delete my old files because I need the setup to remain unchanged, because I don't do well with changes. I think all I should need is to have someone located the license file on drive E: and move it to wherever it is needed on the SSD drive, but I don't know what to look for.
Tech support is not normally available on weekends. You should contact them as soon as the weekend passes and pick up where you left off with them.
-
I can't connect to my school's free wifi. i was able to do it before but not anymore i get the self assign ip addrees message .it has no password only a pop up window before you connect to agree to school terms for wifi use. i don't get that window anymore. i tried everything I can think of. It is a 2010 macbook pro but i recentrly updated to osx lion and even with lion it was working fine so I nkow it is not the update. also Im able to connect to other internets at home it works great. starbucks too. but i became so frustated that i reset my computer to manufactuter setting and reinstall snow leopard on it. still I cant connect. I need help please i have been searching all over the web for help and i see people has been having this same problem for years now.. oh yeah and i know it is not the internet cuz there are other macs connecting to it without a single problem so i think it is an isolated problem plase help....i have follow many advises such as delete the internet from your prefered netwoks. restar your commputer etc etc.
Be sure Safari does not have the Block Pop-Up Windows preference set.
Where I work now there are several unencrypted VLANs that require authentication, and Safari promptly pops up a window for me to register every time. -
What is the best way to use a SSD for Photoshop/photo editing?
Computer hardware newbie here: I do a significant amount of photo editing work and for a very long time I've experienced Photoshop, Bridge and Photomatix crashing constantly (usually due to insufficient RAM) or just generally taking forever (Bridge took forever to load the thumbnail/preview extractions in a folder full of images, Photoshop took forever to save images and Photomatix took ages to load/merge a set of bracketed photos). Here are the typical error messages I'd get: http://pastebin.com/J9byczse
As a professional photographer, constantly running into that sort of thing is quite aggravating, so to hopefully avoid ever having to deal with that again I invested in a new custom built computer. It's Windows 7 Professional 64 bit with 32GB of RAM and a 240GB SSD; I'm using the 240GB SSD as my boot drive/OS, all of my programs are installed there, and the page file. My photos and data are stored on several HDDs. I have yet to install any of my photo editing software (Photoshop CS6 Extended, Lightroom, Photomatix etc) to the new computer yet since I'd like some advice first.
My basic question is this: what is the best way to take advantage of the SSD (and the computer in general) when it comes to my photo editing software?
Specifically...
1. If I have a folder of photos I'm working on, should I move it to the SSD and then work on them from there in order to take advantage of the speed of the SSD? Would this make any difference in terms of speed if the photos are located on the SSD vs. an internal/external HDD?
2. Most of what I've read online seems to recommend two separate SSDs, one for installing/booting the apps and one for cache/scratch. Does it matter if I use my 240GB SSD for both?
3. This is a fairly new computer and the SSD is already almost half full (102GB used, 120GB free) *WITHOUT* any of my photo editing software installed yet. I'm concerned about how fast that remaining 120 GB may fill up. As it fills up will I lose the speed advantage of the SSD vs. a regular HDD?
4. Sort of similar to #3, but should I bother moving any of my other non-photo editing programs/caches off of the SSD to a HDD and would there be any major difference in the speed/lifespan of the SSD if I did so? It's mostly Firefox and Chrome and their caches that I'm concerned may be a problem if they remain on the SSD.
Thanks for any help!If you have an SSD you can run the cache and programs on the same drive. However, many recommend a scratch disk size of 100-200 gigs so that will not work here unless you opt for a larger SSD. Otherwise an internal spinner is recommended that does not contain the program files, or idealy any other files that may want to get acessed at same time (only one read/write head per drive).
With 32 gig of RAM you may not need the constant use of the scratch drive unless working on large images with lots of layers. So see no advantage to moving folder to SSD for temp work environment.
From what I read the new crop of SSD do not have the wear problems of the older versions. -
My Iphone 4s can not scan for wifi signals. My phone was jailbroken and it was working fine until one day, my phone began to have problems searching for wifi signals. It connected and took longer to do so, however the next day it didnt pick up any wifi what so ever. I tap settings>wifi>on> and its an endless search in places where there is wifi.I saddly lost my hard drive where i kept a back up for my iphone, so restoring it from a back up wont do. I plugged it in on another
computer which i had to set restore as a new phone. I did and i still hasn't worked, i am open to suggestions and the following i am aware of:
It hasnt been dropped
condensation/humidity (which i dont want it to be because it has been raining a lot and its never been wet)
Thank you in advance!- Reset the iPod. Nothing is lost
Reset iPod: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Power off and then back on your router
- Reset network settings: Setting>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connection
What encryption our you using? Try changing the encryption, icluding using no encryption for test perposes. -
Can I use my Time Capsule for wifi parental control?
Can I use my Time Capsule for WiFi parental control. The objective first is to use a time clock to control internet access (completely on or off). Second objective is to use the Time Capsule which is also the WiFi router for more selective internet control? Anyone out there have any tips on making this work? We have Time Warner cable feeding the house internet, which is then corrected to the 2Tb Time Capsule which also provides our WiFi. Any information including other alternatives would be most appreciated. Surely we are not the only parents on the planet with this issue. Thanks very much!
how do I get the Mac addresses for each device (this won't be a problem, I demand the device, check it, and then return it).
What wireless devices are we looking at here?
Most devices have the AirPort ID or MAC Address or Hardware Address printed on the back or bottom of the device
Otherwise, you can learn the correct number by process of elimination. Turn off all wireless devices except your Mac computer....if it is connecting using wireless.
Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon
Look for Wireless Clients and click on the numerical IP address that is displayed
Another box will open
Look for the Hardware Address. It will be displayed as xx : xx : xx : xx :xx : xx
Write that down and note that it is your Mac.
Now, connect another wireless device and repeat the sequence. Click on the "other" listing that you see to find out more info about that device. Write down the ID or Address and note what device it is. Then power it off.
Do the same for each wireless device that you want to have limited access.
Post back when you have all the info. -
I have the latest iTunes but am unable to update my phone or my ipad 2 I have been in to the shop and they said I need to download a different type of iTunes for wifi I have a desk top with windows vista and wifi can you please help
We'll need more information before anyone can be of much help. What model iPhone is it, what versions of iOS are running on the iPad 2 now, what exactly are you trying to update, and what version of iTunes are you running? And what exactly is going wrong (include error messages if any).
Once we have that information, someone here can probably offer advice. Note that you cannot sync content or upgrade iOS wirelessly until you get your iPhone and iPad up to iOS 5 and that requires that you connect those devices to your computer via the Dock-USB cable.
Regards. -
Please help me with choosing the Hardware for my new computer
I am creating a new editing machine that i will be using After effect, photoshop, flash, illustrator, and 3ds max. I do a lot of 3d and 2d animation, video editing and graphic design.
This is the system i am currently planing on building:
CPU: intel core i7 2600k ( I will be overclocking it to around 4.8 ghz)
Motherboard: Asrock p67 extreme6
Memory: G.Skill ripjaws x series 16gb ddr3 1600 cas latency 7
Graphics Card: Gtx 570
Power Supply: Rosewill bronze series 1000w
Hard drive: 4x Corsair F120 in raid 0
Case: Bitfenix collosus
Cpu cooler: Noctua Nh-d14
I have a budget of $2500 for this computer. I was wondering if anyone has any suggestions on things i should change or would recommend a completely different build for my budget.
Also i was wondering if the gtx 570 was a stupid choice and i should get a quadro 2000 instead. I dont do any gaming.
One last thing, do 4 ssd in raid 0 help at all or should i just get 8 hard drive in raid 10, or should i spend less money on hard drives.
P.S. I know that the the i7 2600k has been recalled but i am in no hurry to build this computer. Also feel free to recommend hardware that hasn't yet been released but will probably be out in the next 8 months.
P.S.S All of the programs i listed are CS5.Agree with all from Todd, and some things I'd consider:
Dual CPUs will pack more rendering punch, especially in your 3D work.
Even though 16GB of RAM is generous, I'd consider more. Remember the rule: 2GB for each CPU core, plus some more for OS and other applications. If you're running 8 threads/cores for rendering, 24GB would be optimum.
While the hard drives will provide awesome performance in that config, it's a lot of money to spend on less than a terabyte of storage. RAID 0 is also pretty volatile, so be sure to run a reliable and regular backup system.
For my money, I'd probably use one good-sized SSD for a system drive, then 3 or 4 conventional (or hybrid SSD) drives for media storage, with a decent RAID controller. You'll get 3 times the storage for half the price, and still have quite zippy I/O speeds. -
Certificate Not Verified for Wifi WPA Enterprise
Hi all
I have a MDM server to deploy profile to all enrolled devices (iPhone4s, iPad...etc) for wifi setting (WPA2 PEAP SSID: M_WEP_ENT).
But I found one issue, if users have ever connected to M_WEP_ENT and accepted Certificate.
After deploying profile to the users' devices, it shows "Not Verified" in Certificate while these users try to connect the wifi with specified SSID.
And I also install this profile with iPCU, but there is no this problem, iOS just directly to ask users for input user/password again.
The following is my profile plist setting, does any idea for this issue ?
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<array>
<dict>
<key>AuthenticationMethod</key>
<string>directory</string>
<key>AutoJoin</key>
<false/>
<key>EAPClientConfiguration</key>
<dict>
<key>AcceptEAPTypes</key>
<array>
<integer>25</integer>
<integer>21</integer>
</array>
<key>EAPFASTProvisionPAC</key>
<false/>
<key>EAPFASTProvisionPACAnonymously</key>
<false/>
<key>EAPFASTUsePAC</key>
<false/>
<key>OneTimePassword</key>
<true/>
<key>OneTimeUserPassword</key>
<true/>
<key>OuterIdentity</key>
<string></string>
<key>SystemModeCredentialsSource</key>
<string>ActiveDirectory</string>
<key>TLSAllowTrustException</key>
<true/>
<key>TTLSInnerAuthentication</key>
<string>MSCHAPv2</string>
<key>UserName</key>
<string></string>
<key>UserPassword</key>
<string></string>
</dict>
<key>EncryptionType</key>
<string>WPA</string>
<key>HIDDEN_NETWORK</key>
<false/>
<key>Interface</key>
<string>BuiltInWireless</string>
<key>Password</key>
<string></string>
<key>PayloadDescription</key>
<string></string>
<key>PayloadDisplayName</key>
<string>WiFi (M_WPA_ENT)</string>
<key>PayloadEnabled</key>
<true/>
<key>PayloadIdentifier</key>
<string>com.test.wifi.config</string>
<key>PayloadOrganization</key>
<string>test</string>
<key>PayloadType</key>
<string>com.apple.wifi.managed</string>
<key>PayloadUUID</key>
<string>c20997cf-e696-4d48-b685-c88c3633d4a2</string>
<key>PayloadVersion</key>
<integer>1</integer>
<key>ProxyType</key>
<string>None</string>
<key>SSID_STR</key>
<string>M_WPA_ENT</string>
<key>SetupModes</key>
<array>
<string>System</string>
</array>
</dict>
</array>
</plist>
The following is the error log from iPCU console while users to click "Accept" "Not Verified" Certificate:
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Transaction completed. Status: 200
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Attempting to perform MDM request: DeviceInformation
Jul 10 11:53:06 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Command Status: Acknowledged
Jul 10 11:53:06 Miller-iPhone4s Preferences[5566] <Warning>: -[VPNConnectionStore reloadVPN]: The active VPN configuration has changed from to (null)
Jul 10 11:53:06 Miller-iPhone4s Preferences[5566] <Warning>: -[VPNBundleController _vpnConfigurationChanged:] (0x160200:<VPNBundleController: 0x160200>): _serviceCount(0), serviceCount(0), toggleInRootMenu(0), RootMenuItem(1)
Jul 10 11:53:07 Miller-iPhone4s eapolclient[5579] <Notice>: en0 START
Jul 10 11:53:07 Miller-iPhone4s wifid[547] <Error>: WiFi:[363585187.064848]: Processing link event DOWN
Jul 10 11:53:07 Miller-iPhone4s wifid[547] <Error>: WiFi:[363585187.224358]: Processing link event UP
Jul 10 11:53:07 Miller-iPhone4s configd[14] <Notice>: LINKLOCAL en0: parent has no IP
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore::setDISASSOCIATE() [wifid]:
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLAN Left BSS: @ 0xc0cbc200, BSSID = 00:21:e9:b8:67:b2, rssi = -61, rate = 54 (100%), channel = 10, encryption = 0x8, ap = 1, failures = 0, age = 0, ssid[13] = "HMDM QA Apple"
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AirPort: Link Down on en0. Reason 1 (Unspecified).
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore::setASSOCIATE() [wifid]: lowerAuth = AUTHTYPE_OPEN, upperAuth = AUTHTYPE_WPA2_8021X, key = CIPHER_NONE , 802.1X .
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: [177104.488024000]: AppleBCMWLANNetManager::prepareToBringUpLink(): Delaying powersave entry in order to get an IP address
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLAN Joined BSS: @ 0xc0ff4600, BSSID = 1c:aa:07:17:d3:a0, rssi = -63, rate = 54 (100%), channel = 11, encryption = 0xc, ap = 1, failures = 0, age = 11, ssid[ 6] = "M_WPA_ENT"
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: AirPort: Link Up on en0
Jul 10 11:53:07 Miller-iPhone4s kernel[0] <Debug>: en0: BSSID changed to 1c:aa:07:17:d3:a0
Jul 10 11:53:07 Miller-iPhone4s configd[14] <Notice>: network configuration changed.
Jul 10 11:53:07 Miller-iPhone4s UserEventAgent[12] <Warning>: DEBUG: Changing WiFi state: 0
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Network reachability has changed.
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Network reachability has changed.
Jul 10 11:53:07 Miller-iPhone4s mdmd[5534] <Notice>: (Note ) MDM: Scheduling poll of MDM server.
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Warning>: -[WiFiManager(Private) _enterpriseAssociationResult:withInfo:]: User Information required
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Warning>: -[<CALayer: 0xd5ecaf0> display]: Ignoring bogus layer size (320.000000, 34359738368.000000)
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetPatternPhase: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetPatternPhase: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: clip: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextGetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextFillRects: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetCompositeOperation: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineWidth: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineJoin: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineCap: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetMiterLimit: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFlatness: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextDrawPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFillColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetStrokeColorWithColor: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSaveGState: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineWidth: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineJoin: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetLineCap: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetMiterLimit: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextSetFlatness: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextAddPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextDrawPath: invalid context 0x0
Jul 10 11:53:07 Miller-iPhone4s Preferences[5566] <Error>: CGContextRestoreGState: invalid context 0x0
Jul 10 11:53:08 Miller-iPhone4s kernel[0] <Debug>: AppleBCMWLANCore:startRoamScan(): 2949 Delaying RoamScan; because Join Mgr Busy 0 isWaitingforIP 1this TOTALLY fixed the problem for me
(which started i believe when i deleted the cache, cookies and security settings stuff in camino, sometimes apparently the certificates don't like, preserve themselves or something...):
http://support.rhombic.net/knowledge-base/articles/no-root-certificate-with-mail -app
follow the download links...
and also
https://knowledge.verisign.com/support/ssl-certificates-support/index?page=conte nt&id=SO4785&actp=LIST
(follow the first instruction under the resolution heading)
I don't know actually if this last link above is helpful but i did it anyways. If you find out, let me know!
once these have been downloaded to your desktop, double-clicking them automatically opens keychain. Be sure to put them into your X509 Anchors...
It hasn't resolved everything, but the major websites, its made EVERYTHING a lot easier. and no, i don't want to Archive and Install.
Maybe you are looking for
-
BT Infinity Connection Dropping but BT refuse to a...
Hi, So in September we got BT Infinity. It was a hassle and handled terribly by BT customer service but we eventually got it. It's been working fine for around five months but within the last few weeks we have been having connection issues. Over East
-
How to Connect JSP (Tomcat) with MS access Database
^ Hi all: I have been trying to connect JSP using tomcat server with database in MS Access..I have been going through the required steps...but it seems it is a bit complicated...pls help. ps: I used to get this message when I run the program: C:
-
Please help me
-
Hello, I?m hoping someone may have the answer to this. I am trying to block ALL types of IGMP traffic on a particular interface on at 3560-24-TS-S. We have a Summit 5i switch acting as a core switch for 400 users which all (VLAN 3) participate in a m
-
I started my service March of 2013 and bought the Droid Max with a 2 yr contract. Over the last year I have dealt with 2 phones which freeze up, lag, and have horrible battery life. One of the phones has been replaced but the issues continue. Now T-M