SSL Server Error 1005 on my iPad
I can't get my IPad to play a radio station or news broadcast, it says there is an error connect to internet, yet I'm on the internet!?
Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
Cheers, Tom
Similar Messages
-
cont contact apple server error please help with ipad touch 4. im just fed up with apple please help me because why is it only apple with these kind of problems?
If you mean updae server
Update Server
Try:
- Powering off and then back on your router.
- iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
- Change the DNS to either Google's or Open DNS servers
Public DNS — Google Developers
OpenDNS IP Addresses
- For one user uninstalling/reinstalling iTunes resolved the problem
- Try on another computer/network
- Wait if it is an Apple problem
Otherwise what server are you talking about -
I keep greeting this message trying to set up iPad mini
Apple ID could not be created because of a server error on screen after term and conditions are accepted. What does this mean and how do I fix fix it? Has anyone else had this problem?Antonio,
Show ... it worked ... you are the man! This hint of clicking the right mouse button on the prompt and run as Administrator was perfect.
Thank you very much -
Sync server error for calendars on ipad??
I recently upgraded my iOS and now I get this error. "itunes could not sync calendars to the ipad because the sync server failed"
How do I fix this? I have an ipad mini IOS 7.1. my mac is a macbook pro running 10.8.5.
Thanks,
PamYou may think you are connected to the internet, but maybe not. Click on Safari and see if it connects.
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130?tstart=60
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
http://tinyurl.com/32drz3d
Cheers, Tom -
From my iPad I get an error message "cannot connect to the server". Internet connection not the problem. No problem receiving mail from icloud on my PC. I think it was a set up issue. iPad is new and receives mail from hotmail no problem. It just will not connect to the icloud server.
I am having this same issue. I can access these accounts from computers, other locations on others' computers, but I cannot get the mail from one account on either my iPhone or iPad. I've deleted the account on the iPad and re-installed it, but it still will not receive mail.
Frustrating. -
Server Error: 0x800CCC90, Error Number 0x800420CD
Hi,
Email server MAC OSX 10.4.4
Client: Outlook Express 6
One user keeps getting this error in OE:
Message number 1 could not be retrieved. Account 'mail.domain.com', Server 'mail.domain.com',protocol POP3,Server Error Response: 'ERR [SYS/PERM] Could not read message file', Port: 110, Secure [SSL]: Server Error: 0x800CCC90, Error Number 0x800420CD
Looks like one email in server could be corrupted and cannot be downloaded to the client PC. This email seems like telling OUTLOOK Express everytime user click SEND/RECEIVE that he have available unread messages to be downloaded hence it keeps downloading same messages over and over.
I've uncheck leave a message on the server in OE Tools/Account/Mail/Properties/Advance tab, the downloading of previously downloaded messages stopped but error window still pops up.
How could I delete purge all message in the user inbox in the server.
Thanks
JonnewbieI still can't get it to work. All emails are going out , but no emails can be received . It might have started when I created an account for that user who has one corrupted message that can't be downloaded from his outbox,I created it in apple's mail usiing IMAP as you suggested. When I go to the log using SA I see these
Jul 24 12:51:23 Email-Server imap[4453]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 12:51:35 Email-Server imap[4453]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 12:51:35 Email-Server imap[4456]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 12:52:41 Email-Server imap[4470]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 12:57:18 Email-Server imap[4470]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 12:57:19 Email-Server imap[4546]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 12:58:44 Email-Server imap[4575]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 13:14:23 Email-Server imap[4799]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 13:29:23 Email-Server imap[5024]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 13:44:23 Email-Server imap[5242]: login: mail.cpplaw.com [192.168.1.5] kevinhenderson plaintext User logged in
Jul 24 13:46:45 Email-Server imap[5024]: DBERROR db4: PANIC: fatal region error detected; run recovery
Jul 24 13:46:45 Email-Server imap[5024]: DBERROR: critical database situation
Jul 24 13:46:45 Email-Server master[4370]: service imap pid 5024 in READY state: terminated abnormally
Jul 24 17:54:21 Email-Server2 imap[1824]: badlogin from: mail.cpplaw.com [192.168.1.5]. plaintext user: hhenderson. mail is not enabled for this user
Jul 24 17:54:29 Email-Server2 imap[1824]: badlogin from: mail.cpplaw.com [192.168.1.5]. plaintext user: hhenderson. mail is not enabled for this user
Jul 24 17:54:33 Email-Server2 imap[1824]: badlogin from: mail.cpplaw.com [192.168.1.5]. plaintext user: hhenderson. mail is not enabled for this user
Jul 24 17:54:43 Email-Server2 imap[1824]: badlogin from: mail.cpplaw.com [192.168.1.5]. plaintext user: hhenderson. mail is not enabled for this user
Jul 24 17:54:47 Email-Server2 imap[1824]: badlogin from: mail.cpplaw.com [192.168.1.5]. plaintext user: hhenderson. mail is not enabled for this user
Jul 24 17:56:08 Email-Server2 imap[1824]: badlogin from: mail.cpplaw.com [192.168.1.5]. plaintext user: hhenderson. mail is not enabled for this user
Jul 24 17:56:13 Email-Server2 imap[1824]: badlogin from: mail.cpplaw.com [192.168.1.5]. plaintext user: hhenderson. mail is not enabled for this user
Jul 24 17:56:14 Email-Server2 imap[1824]: badlogin from: mail.cpplaw.com [192.168.1.5]. plaintext user: hhenderson. mail is not enabled for this user
Any other suggestion that you may have. I'm going home till I solve this , and I can't dod it without you...
-Jon -
Weblogic app server wsdl web service call with SSL Validation error = 16
Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
System.setProperty("javax.net.ssl.trustStore",”cacerts”);
System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd); System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1. Do I create “cacerts” the correct order with right keeltool options?
2. Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3. Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4. Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
<wsp:Policy wsu:Id="TokenServices_policy">
<wsp:ExactlyOne>
<wsp:All>
<sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
<wsp:Policy>
<sp:TransportToken>
<wsp:Policy>
<sp:HttpsToken RequireClientCertificate="true"/>
</wsp:Policy>
</sp:TransportToken>
<sp:AlgorithmSuite>
<wsp:Policy>
<sp:Basic256/>
</wsp:Policy>
</sp:AlgorithmSuite>
<sp:Layout>
<wsp:Policy>
<sp:Strict/>
</wsp:Policy>
</sp:Layout>
</wsp:Policy>
</sp:TransportBinding>
<wsaw:UsingAddressing/>
</wsp:All>
</wsp:ExactlyOne>
</wsp:Policy>
<wsdl:types>
<xsd:schema targetNamespace="http://tempuri.org/Imports">
<xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
<xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
</xsd:schema>
</wsdl:types>
<wsdl:message name="ITokenServices_GetUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
</wsdl:message>
<wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
<wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
</wsdl:message>
<wsdl:portType name="ITokenServices">
<wsdl:operation name="GetUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
<wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TokenServices" type="tns:ITokenServices">
<wsp:PolicyReference URI="#TokenServices_policy"/>
<soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="GetUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
<wsdl:operation name="GetSSOUserToken">
<soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
<wsdl:input>
<soap12:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap12:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TokenServices">
<wsdl:port name="TokenServices" binding="tns:TokenServices">
<soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
<wsa10:EndpointReference>
<wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
</wsa10:EndpointReference>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
at com.certicom.tls.record.WriteHandler.write(Unknown Source)
at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
at javax.xml.ws.Service.<init>(Service.java:56)
at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
at weblogic.security.service.SecurityManager.runAs(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server. -
We have a public SSL certificate that allows for Active Directory sync with LDAPS on port 636 with our email smart host. This was working fine and suddenly stopped working and we are now getting SChannel errors Event ID 36869. There were no changes made
to the Exchange server, the firewall or the DC which holds the certificate. I have run a new certreq from the DC and then re-keyed the public SSL certificate and re-installed 3 times but the error does not go away and AD Sync with the vendor
fails. When I run LDP.exe the connection on port 636 fails with "cannot open connection" and the system event log throws the S Channel event 36869 "The SSL server credential's certificate does
not have a private key information property attached to it" There is no software firewall set on the DC. When I run Certutil -VerifyStore MY it shows the current certificates as well as the revoked and expired certificates
correctly. Certificate 0 is the public cert and is listed with Server and Client authentication, the FQDN of the server is correct and "Certificate is Valid" is listed. The private cert is Certificate 1 and has server and client authentication, the
FQDN is correct, Private key is not exportable and it ends with Certificate is Valid. I do not see a point in re-keying the cert again until I figure out what the root of the problem is. I have read in some forums that the private cert should not be set to
expire after the public cert but that does not make a lot of sense when in a situation like this the private cert is of course newer than the public. In fact it is too early to renew the public cert. I have been troubleshooting this for a few days and at this
point I would have to drop my AD sync with the vendor to LDAP in order to add new users. I do not want to do that for obvious reasons and I do not want to have our spam filtering and email archive service running without Directory sync. Any help would be greatly
appreciated.Hi,
Have you tried this?
How to assign a private key to a new certificate after you use the Certificates snap-in to delete the original certificate in Internet Information Services
http://support.microsoft.com/kb/889651
Best Regards,
Amy -
Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal MorciniecSame issue here, looking for more information !
-
Hi,
We develop a server-side application which receives incoming https connections using self-signed certificate. It was all ok while we were using Windows 7 or Windows 2008 as OS, but when our clients started installing Windows 8 as server OS they encountered
big problem: application got unavailable in few hours after start.
In event logs we have following:
A fatal error occurred when attempting to access the SSL server credential private key. The error code returned from the cryptographic module is 0x8009030d. The internal error state is 10001.
After restart, application recreates certificate and all works normal few hours till next fatal error.
This
article did not help us. And I repeat that this error appears only on Windows 8 (we tested on Windows 8.1). Windows 2012 Server we did not test yet.
How we can solve this problem?
Best regards.Hi,
Since this article released in 2008,I suspect the code mentioned in this article doesn't supprot Windows 8.
And since the certificate was written by C#,I suggest you submit a new case on MSDN Forum as they will be more professional on your issue:
https://social.msdn.microsoft.com/Forums/en-US/home
Regards,
Kelvin hsu
TechNet Community Support -
When I am trying to upgrade my iOS version I am getting an error message saying " the iPad software update server could not be contacted", I also get an error message prior to that which says the certification of the server is invalid?
Temporarily disable any security software on the computer and try again.
-
after updating to ios 6.1.2 ipad2 ended up in restore mode, i have restored it and now i need this morning's the backup that's only on icloud
but after i login (succesfully) and acept terms & condition popups an error "Connection Error - server error: apple id couldnt be created" or "impossible to login there has been a problem while connecting with server" when it should start setting up the ipad.
any clues on whats going on? i really need this backup. what can i do? there is any other way to restore using the icloud backup from somewhere else?
thankshttps://discussions.apple.com/message/19556552#19556552
Level 1 (0 points)
brandonfromhenderson
This solved my questionRe: Apple ID couldn't be created because of a server error when i try to restore from a backup 13-sep-2012 9:49 (in response to brandonfromhenderson)
Found the solution! Go To Appleid.apple.com and set your birthday and other questons.. -
Hi. We have two ipod gen 5, one iPad 2 and one iPad air. Since thus morning we can get very limited internet access. Constantly getting the message "500 internal server error". We upgraded two days ago to bt hone hub 4 and though this may be the issue but Bt assure me it's nog their fault? Does anyone have an idea how to solve this. Also I'm not a computer genius so it would have to be in layman terms!!! Thanks in anticipation
Has anyone else experienced this as it's giving me a headache now x
-
In setting up an Ipad, it stops saying server error?
After I enter my apple ID and PW & hit continue or next, I get a message saying server error. Please help
Hi Are you using a PC or WiFi ? Turn off iPad & your Router for 30Seconds . Then try again . Cheers Brian
-
I have a problem connecting to the server (SSL problem) on my new Apple Ipad (iOS6). When submitting my Apple ID password, I am prevented from signing in to a secure connection due to an SSL problem. Any suggestions ?? Thank you!
Sounds more like you have a problem with your apple id. For starters go to that page click manage my apple id and singn in. If you can't sign in reset password.
https://appleid.apple.com
if you can sign in there, try to sign in to itunes on your computer.
Maybe you are looking for
-
Can I return my Turtle Beach Z22's?
I have all the papers that came with it including the box and box cover. I don't think I have the stickers still. I also have the recipet.
-
How to import network devices on ISE 1.2
Hi, experts, I'm trying to import network devices on ISE 1.2.0.899 so I downloaded the template and opened with notepad and wrote all the nessesarry information. and I tried to upload to ISE, and it just said import failed. no reason.. does anyone kn
-
Price Condition Update Function Module
I'm trying to identify the function module that updates the price conditions in a sales document. I know one exists as I used it years ago but can't seem to locate it. It replicates the manual process of clicking the update button on the screen. this
-
ITune 6 0 2 compatibility with ASUS DRW_1608P
ITune 6 0 2 compatibility with ASUS DRW_1608P My program doesnt see my ASUS DRW but show the old CDWriter How can i do to make ITune recognize the new Jacques post2jrm-05 at yahoo.fr
-
I'm a beginner with Actionscript, but am comfortable with programming in other languages. I am creating a simple interface in Flash 8, and need to include some actionscript that I can apply to a button that will load a movieclip onto the stage from m