SSRS Do not Group if the Field value is NULL

I have an SSRS report that I am doing dynamic grouping on that displays an agenda with time. grouping performed on a field called subheader and then the agenda times (another field) displayed under that group subheader.
The problem that I am having is that I want to avoid the grouping if the parameter is null. I just want to sort by the time if there is nothing in the sub header group. Times are being displayed in the wrong order for the titles where the subheader field
is null

The grouped items work fine however the sorting is not right for the items that are not in the group. See example below. The Time 9:45 to 10:100 should appear below the group however it is appearing in the wrong place. The sorting is out of order for the
items where the subheader (Caseing Test) is null.
9:45AM - 10:00AM
Breking
Caseing Test
9:15AM - 9:30AM
Case Test:
Expansion of Time
This expansion is a two-phase idea

Similar Messages

Report query not returning the field value from external table

hi
I have an issue regarding reports. I have a query having 4 fields from external table and remaining from db tables. the report query returns all the fields from the db tables and only 2 fields from external table. but the same query if I tried in plsql developer it returns all the fields values.
Can anyone please help me in this issue.
Thanks and Regards
kk

Duplicate post?
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer
Please log a SR if you do not get any reply to your thread instead of creating new one.
Thanks,
Hussein

The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTR

Hi all,
BAPI' BAPI_MATERIAL_SAVEDATA' throws error the below error while creating material.
'The value 4010 39 99 is not allowed for the field MARC-STEUC/BAPI_MARC-CTRL_CODE'
Any idea abt this error.
Regards,
Thiyagu

Hi,
As this BAPI is triggered from external sytem that by client in production environment , I would not be able to dig it further.
Thats why I asked if anybody confronted the same error previously.
Thanks for suggestion.

The value is not allowed for the field Cross-plant CM

Hello All
When i copy material in refernce to existin gone. I am getting this message
"The value is not allowed for the field Cross-plant CM"
I am not putting any thing in this Basic-view Cross-plant CM, but still getting this message.
Any help will be good...Thanks in advance...

Hi,
Please check the check box in front of the field config material is checked?
If so then this material is configurable material
A material that can have different variants.
For example, a car can have different paint, trim, and engines.
Configurable materials have a super bill of material (BOM) that contains all the components for producing every variant of the material. Similarly, they have a super task list that contains all the operations. When a material is configured, only the components and operations needed for a variant are selected.
Please check
BR
Diwakar

The value 1 is not allowed for the field variace key

Hi experts,
When i was creating material master i was getting the status message as "the value 1 is not allowed for the field variance key" , but its stopping there its not moving out of that screen and creating the material record. When i see this field in the material master configuration its an optional field. Can you give me suggestions, where it can go wrong.
Thanks & Regards,
Ravi.

Hi
Can u tell me the field name . I cant get that field ref key. In which view does it come.
Reg
Raja

Possibele entries are not populating for the fields on the selection screen

Hi,
Possible entries are not populating for the fields on the selection screen for the query.But its working fine in Development and Quality Systems.
Can any body help me out
Regards,
Amit.

Hi,
In the Selection screen,go to Settings->Value Restrictions tab->Read Mode Settings->Custom radio button and select the options Values in Master Data or Only Values in InfoProv or Only Posted values for navigation.
After this setting,check whether you are getting the data or not.
Rgds,
Murali

UDF for Checking the field value

Hi
I want to check the whether the fiels conatins any value or not in mapping ... if not i want to raise the exception using the UDF
DO any one have sample code for writing the UDF
SV

Hi SV
what is your requirement first that should br clear.
i am giving you two UDF
1) i have written this uDF for string and comparing the field value XYZ
2) i am entering a string and its returning aa string which starts from the index of your input fixed length
int len = a.length();
String res = "";
String temp = "";
if ( len >= 10)
temp = a.substring(0,10);
if ( temp.equals("XYZ"))
res = temp;
else
res = "";
return res;
=======================================
String fixed = "ABCD";
String res = "";
int index = -1;
index = a.indexOf(fixed);
if (index == -1)
res = "NO INDEX FOUND";// or if u wanna set it as null res = "";
else
res = b.substring(index4,index12);
return res;
===
hope these may solve your problem
Thanks
Sandeep sharma
If helpful reward points

How to get the Output File Name as One of the Field Value From Payload

Hi All,
I want to get the Output file name as one of the Field value from payload.
Example:
Source XML
<?xml version="1.0" encoding="UTF-8" ?>
- <ns0:MT_TEST xmlns:ns0="http://sample.com">
- <Header>
<NAME>Bopanna</NAME>
</Header>
</ns0:MT_TEST>
I want to get the Output file name as " Bopanna.xml"
Please suggest me on this.
Regards
Bopanna

Hi,
There are couple of links already available for this. Just for info see the below details,
The Output file name could be used from the field value of payload. For this you need to use the UDF DynamicFile name with below code,
// Description: Function to create dynamic Filename
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
DynamicConfiguration conf = (DynamicConfiguration) container.getTransformationParameters().get(StreamTransformationConstants.DYNAMIC_CONFIGURATION);
DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File" , "FileName");
conf.put(key,a);
return "";
With this udf map it with the MessageType as
(File Name field from Payload) > DynamicFileConfiguration>MTReceiver
Thanks
Swarup

Create Excel file in application server but the field value is incorrect

Hi Experts,
i am facing a problem when create excel file in application server using OPEN DATASET command.
the internal table have 4 field and one of those field contains 19 digit number --> ICCID.
the code running well, successfully create EXCELfile in application server but the problem is SAP only copy exactly first 15 digit numeric only and the rest became zero 0
Example :
the field value in internal table is 8962118800000447654 but when i opened in the excel file the value became 8962118800000440000.
and if i add alphabet like a8962118800000447654 then it is correct.
is there is anything wrong with my code?
here is my code
CONSTANTS: c_tab TYPE abap_char1 VALUE cl_abap_char_utilities=>horizontal_tab. "Tab Char
Data : begin of lt_zdsdmmdt00005 occurs 0,
         SERNR (18) type c,
         MSISDNl(20) type c,
         BOX1 (20) type c,
         ICCID(30) type c,
       end of lt_zdsdmmdt00005.
data : ld_temp(100) type c.
i_file = '/usr/sap/DM/test_excel.xls'.
open dataset i_file for output in legacy text mode.
loop at lt_zdsdmmdt00005.
    move lt_zdsdmmdt00005-ICCID to ld_iccid .
    concatenate lt_zdsdmmdt00005-sernr lt_zdsdmmdt00005-MSISDN lt_zdsdmmdt00005-BOX1 ld_iccid
    into ld_temp separated by c_tab.
    transfer ld_temp to i_file.
endloop.
close dataset i_file.
Best Regard,
Akbar.

Hi Naveen,
thanks for your reply,
i already tried and the result still the same. any idea?
Best Regard,
Akbar.

Field ZZBUDAT is delta-relevant, but does not exist in the field list

Hi All,
I have created a Generic DataSource on a View.Now there is a situation ,i need to add a Date field form some other table.
So i have enhanced the datasource now that date is coming in my datasource.
But when i tried to make delta on that date field its showing error-
Field ZZBUDAT is delta-relevant, but does not exist in the field list
Message no. R8279
Diagnosis
The DataSource uses field ZZBUDAT for specifying the delta. In the DataSource field list, however, the field does not occur
Now how i can make this field dalta relevant?
Thanks,
Piyush

Piyush,
I think the message in SAP is quite clear....
If the field ZZBUDAT does not exist in the view ... how do you expect the datasource to know which records have changed...?
The delta relevant field SHOULD be in the view - else there is no way the extractor can identify the changed records ...
Please remember that the Generic extractor is a simple select statement with a where clause on the delta relevant field and nothing else ... if you want the changed on field to come from another table - then you need to write a function module extractor to do this...
The order of processing is that - the view fields are processed first - then the enhanced fields are processed followed by the user exits...

Field catalog does not agree with the fields of the functional area

G'day everyone,
I am using a generic extractor via infoset to extract data from R/3 source system.
Using RSA3, I have obtained an error message and no further details.
****ERROR MESSAGE
"Field catalog does not agree with the fields of the functional area
Message no. RSUQ134
****ERROR MESSAGE
I have checked and adjusted my infoset in SQ02 and they seems fine but still obtain the same error.
In BW, replicated the datasource and activate the transfer rules but still obtain the same error.
Anyone knows how to get more details for this type of error? Or how to fix this problem?
Regards
Wayne

I think I have just solved it.
Transaction RS02 delete and recreate after checking the structure in BW and Source system are the same.
Cheers

Can not set OARG.cstAllcAcc field value with CustomsGroups Object

Can not set OARG.cstAllcAcc field value with CustomsGroups Object, please open this field in this Object because it is a key field related to financial system.

I guess, it should work; instead of html:submit, try with button.

Excluding the alpha charactes in the field value

Hi All,
I have a requirement where I need to delete all the character values in a field..
Ex: If the field value of ABC123a....then i need to delete the 'ABC' and i shuld retain wid 123a.
Please do the need ful.
Thanks,
Shiva

Hi Shiv,
take a variable of type n and move this into thatvariable.
Data:
w_char(20) type c value 'ABC123a',
w_num(20) type n.
w_num = w_char.
w_num will have 123.
or
Data:
w_str(20) type strin value 'ABC123a',
w_num(20) type c,
w_len type i.
w_len = strlen( w_str ).
do w_len times.
if w_str+sy-index(1) ca '0123456789'.
concatenate w_num w_str+sy-index(1) into w_num.
endif.
enddo.

Using MISSING FIELD VALUES ARE NULL for external table

I want to place a null for values missing in the sub_account field. Here is my external table:
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_log_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\log';
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_bad_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\bad';
create table ext_INCOMING_ORDERS_table (
Account varchar(5),
Sub_Account varchar(1),
Override_Code varchar(1),
Nomenclature varchar(28),
chg_nbr varchar(3),
quantity integer,
U_I varchar(5),
zipcode varchar(5),
type_reject varchar(2)
organization external
type oracle_loader
default directory user_dir
access parameters
records delimited by newline
missing field values are null
badfile INCOMING_ORDERS_bad_dir:'INCOMING_ORDERS%a_%p.bad'
logfile INCOMING_ORDERS_log_dir:'INCOMING_ORDERS%a_%p.log'
fields
Account(1:5) char(5),
Sub_Account(7:7) char(1),
Override_Code(10:10) char(1),
Nomenclature(11:38) char(28),
chg_nbr(40:42) char(3),
quantity(44:48) integer external,
U_I(50:54) char(5),
zipcode(56:60) char(5),
type_reject(61:62) char(2)
location('PTCLICK.MANUAL.NOMEN.TXT','PTCLICK.ORDERS.TXT', 'EUR_RES.TXT', 'MQ.TXT', 'BPRO.TXT')
reject limit unlimited;
How can I place the MISSING FIELD VALUES ARE NULL for missing values for the sub_account?

made the change I received this error:
SQL> select * from ext_INCOMING_ORDERS_table;
select * from ext_INCOMING_ORDERS_table
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-00554: error encountered while parsing access parameters
KUP-01005: syntax error: found "no": expecting one of: "comma, date_format,
defaultif, enclosed, ltrim, lrtrim, ldrtrim, notrim, nullif, optionally, ),
rtrim, terminated"
KUP-01007: at line 7 column 26
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_log_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\log';
CREATE OR REPLACE DIRECTORY INCOMING_ORDERS_bad_dir
AS 'c:\starpubs\starpubs\dataformats\logs\INCOMING_ORDERS\bad';
create table ext_INCOMING_ORDERS_table (
Account varchar(5),
Sub_Account varchar(1),
Override_Code varchar(1),
Nomenclature varchar(28),
chg_nbr varchar(3),
quantity integer,
U_I varchar(5),
zipcode varchar(5),
type_reject varchar(2)
organization external
type oracle_loader
default directory user_dir
access parameters
records delimited by newline
badfile INCOMING_ORDERS_bad_dir:'INCOMING_ORDERS%a_%p.bad'
logfile INCOMING_ORDERS_log_dir:'INCOMING_ORDERS%a_%p.log'
fields
Account(1:5) char(5),
Sub_Account(7:7) char(1) NO PRESERVE BLANKS,
Override_Code(10:10) char(1),
Nomenclature(11:38) char(28),
chg_nbr(40:42) char(3),
quantity(44:48) integer external,
U_I(50:54) char(5),
zipcode(56:60) char(5),
type_reject(61:62) char(2)
location('PTCLICK.MANUAL.NOMEN.TXT','PTCLICK.ORDERS.TXT', 'EUR_RES.TXT', 'MQ.TXT', 'BPRO.TXT')
reject limit unlimited;

Sender JMS Adapter error: The JMS provider gave the error message as Not permitted, and the error code is null

I am trying to connect tibcoems with PI using a Sender jms adapter.After successfully installing the drivers , the sender adapter goes into error.
"The JMS Provider gave the error message as Not permitted, and the error code is null"
The Transport protocol is 'Access JMS Provider with JNDI' and i have been given the required parameters from the tibco guys.
Your input are highly appreciated.
Shyam

Hi AQmit,
Thanks for the reply.
Please find the screenshots of what i am trying to do.
Also, Can u direct me how to check the right logs?

SSRS Do not Group if the Field value is NULL

Similar Messages

Maybe you are looking for