SSUS 2012 Script Component (VB) Build But Still Has Compile Error
The title says it all really.
The Script Component builds without error but when I close the editor (and when I execute the package), I get a message saying that there is a compile error. There is of course a big red "X on the script component. No errors are indicated in the edit
window or when building the script. Can anyone help? this is really holding me up.
The script has been copied from a working SSIS 2008 package. It uses the report execution web method. I have successfully changed the web reference to ReportExcution2010, there doesn't seem to be a RepprtExcution2012.
R Campbell
It's probably best to close thread and that I start a new one. I think that I have gone off on a tangent here. Yes SSIS isn't doing much of a job in reporting errors but my main concern is the error itself.
I am trying to port an SSIS Script Task from SQL 2008 to SQL 2012. Is uses the ReportExecution2005 web service to run SSRS reports. The really strange thing is that, even though the same web reference is used, different methods seem
to be available in SQL 2008 and SQL 2012. This doesn't sound right to me, if you refer to the same Web Service you should see the same metros or am I wrong about that.
For example in SQL 2008 there is ReportExecutionService
object but on the SQL 2012 to service there only seems to be
ReportExecutionServiceSOAPClient.
R Campbell
Similar Messages
-
Script Task Builds Successfully But Still Has Compile Error (SQL 2012)
This is repost in a way but the problem has not gone away and I really need to find a solution.
I have some script from SSIS 2008 that uses the ReportExecution2005
web service to execute SSRS reports and save the results to Excel. There were some initial problems with confusion between Web Service Reference (legacy?) and Service Reference (WCF) but I think that I have that sorted out
now.
The remaining problem is that, while the VB script (which I have pasted in from a working SSIS 2008 Script Task) builds/complies without error, I get a compile error when I close the Script Task and it has the dreaded "Red X" in the Control
Flow. If I attempt to run the package I get a message box saying that there is a compile error.
How can I identify the problem and fix the error? The script itself has no errors in SSIS 2008.
R CampbellThis is the code by the way (see below) as pasted into the Main sub.
I have added
http://localhost/reportserver/reportexecution2005.asmx as a Web Service
Reference (under the "Advanced" button) not just a Service Reference (WCF).
I can build the code without error but I get an error, saying that there is compile error, when I close the Script Task.
ReportExecutionService definitely shows up in Object Explorer, not the
WCF "equivalent" of ReportExecutionServiceSoapClient.
I have always had the impression, that when you close a Script Task, a compiler kicks in to auto-generate some internal script. Could it be (as seems likely) that this compiler is picking up errors that "Build" doesn't (when the script is open)?
I think that there was once an explicit Compile rather than just Build option in the Script editing environment but I can't find it in SQL 2012 Database Tools (nee BIDS).
Dim objRSExec As New localhost.ReportExecutionService
Dim objParam0 As New localhost.ParameterValue
Dim objParam1 As New localhost.ParameterValue
Dim objParam2 As New localhost.ParameterValu
Dim objParam3 As New localhost.ParameterValue
Dim objParam4 As New localhost.ParameterValue
Dim objParam5 As New localhost.ParameterValue
Dim objParam6 As New localhost.ParameterValue
Dim objParams() As localhost.ParameterValue
Dim objResult() As Byte
Dim objStream As FileStream
Dim FileType As String
Dim FileExtension As String
Dim FilePath As String
Dim NumberOfParameters As Integer
Dim ReportName As String
Dim TaskSuccess As Boolean = True
FileType = Dts.Variables("FileType").Value.ToString()
FileExtension = Dts.Variables("FileExtension").Value.ToString()
FilePath = Dts.Variables("FilePathNameExt").Value.ToString()
ReportName = Dts.Variables("ReportPathName").Value.ToString()
NumberOfParameters = CInt(Dts.Variables("NumberOfParameters").Value) - 1
ReDim objParams(NumberOfParameters)
If NumberOfParameters >= 0 Then
objParam0.Name = Dts.Variables("P0Name").Value.ToString()
objParam0.Value = Dts.Variables("P0Value").Value.ToString()
objParams(0) = objParam0
End If
If NumberOfParameters >= 1 Then
objParam1.Name = Dts.Variables("P1Name").Value.ToString()
objParam1.Value = Dts.Variables("P1Value").Value.ToString()
objParams(1) = objParam1
End If
If NumberOfParameters >= 2 Then
objParam2.Name = Dts.Variables("P2Name").Value.ToString()
objParam2.Value = Dts.Variables("P2Value").Value.ToString()
objParams(2) = objParam2
End If
If NumberOfParameters >= 3 Then
objParam3.Name = Dts.Variables("P3Name").Value.ToString()
objParam3.Value = Dts.Variables("P3Value").Value.ToString()
objParams(3) = objParam3
End If
If NumberOfParameters >= 4 Then
objParam4.Name = Dts.Variables("P4Name").Value.ToString()
objParam4.Value = Dts.Variables("P4Value").Value.ToString()
objParams(4) = objParam4
End If
If NumberOfParameters >= 5 Then
objParam5.Name = Dts.Variables("P5Name").Value.ToString()
objParam5.Value = Dts.Variables("P5Value").Value.ToString()
objParams(5) = objParam5
End If
If NumberOfParameters >= 6 Then
objParam6.Name = Dts.Variables("P6Name").Value.ToString()
objParam6.Value = Dts.Variables("P6Value").Value.ToString()
objParams(6) = objParam6
End If
Try
With objRSExec
.Credentials = System.Net.CredentialCache.DefaultNetworkCredentials
.Url = "http://localhost/reportserver/reportexecution2005.asmx"
.LoadReport(ReportName, Nothing)
.SetExecutionParameters(objParams, "en-us")
objResult = .Render(FileType, Nothing, FileExtension, Nothing, Nothing, Nothing, Nothing)
End With
objStream = File.Create(FilePath, objResult.Length)
With objStream
.Write(objResult, 0, objResult.Length)
.Close()
End With
Catch e As Exception
Dts.Log("ERROR - RSExec - " & e.Message.ToString(), 100, Nothing)
TaskSuccess = False
End Try
If TaskSuccess Then
Dts.TaskResult = ScriptResults.Success
Else
Dts.TaskResult = ScriptResults.Failure
End If
R Campbell -
Hi,
I have uploaded an app build for pre release and its still under processing So i uploaded a new build but still the issues is not resolved.
Please help...
ThanksHi smithin,
Thanks for visiting Apple Support Communities.
It sounds like you've submitted an iOS application to the App Store, which is being processed, but there's an unresolved issue.
For additional help with this situation, Apple Developers can use the contact methods on this page:
https://developer.apple.com/contact/
All the best,
Jeremy -
My iPod Classic 160GB is recognized by computer, and goes through sync process, but still has old stuff...
I feel like there must be an issue with the library location, but I don't know how to correct that. My Dad recently wiped my computer and deleted Windows XP and installed Windows 7. I don't know what he did, but my iTunes library is still intact it seems. However, I've added quite a few podcasts that I'd like to sync to my iPod. When I connect it, it goes through the sync process, but ends quickly and says its safe to disconnect. None of the new podcasts are on there though.
Also, there was something really wrong with my iTunes account. When I went to buy something from the store, it wouldn't accept my password, and when I went to reset it, it wouldn't recognize my birthdate and month (I had the correct username). I ended up creating a new account and purchasing a song. This time, it did sync the new song onto my iPod, but not the podcasts I'm trying to sync.
As far as the library location, is there anything particular that has to be included in that library in order for it to be recognized by iTunes when you sync? Awhile back (before my Dad worked on my computer), I had changed the folder location to my external hard drive, but in researching, I saw that I still had in another drive some folders with music that is currently on my iPod. So it looks like I have some stuff on two different drives... Maybe this has something to do with it not syncing right?
I did check, and my Firewall doesn't have iTunes blocked.
As you can see, I'm not very experienced with all of this... Sorry for the confusion. If you are interested in helping me and have any questions, please let me know.
I'm hoping someone will be able to help me... I desperately want to be able to listen to my podcasts, as I'm a stay-at-home Mom of 4 little ones, and the podcasts are kind of an "escape" for me when the children are napping or playing. :-)
Thank you in advance for your help!Oh my goodness!! I am absolutely thrilled right now B-rock!! I don't know how I missed it, but when I went back to change the setting like you mentioned, I noticed that the very top box that says "Sync Podcasts" wasn't checked! I have no idea why... But my heart started to race when I checked that box and all of a sudden it started syncing all my podcasts!! It's gonna take a long time (I have 385 of them!), but I am just so happy you helped me with this problem. Thank you SO much!
-
I am unable to retrieve my emails since yesterday. I called Time Warner Cable, my Internet provider, but they could not help me; they stated that the settings had changed, since they were upgrading. I adjusted the settings, but still get an error message:
Alert
There may be a problem with the mail server or network. Verify the settings for account "Mail 1" or try again.
The server returned the error: The connection to the server "smtp.roadrunner.com" on port 110 timed out.
I changed the server, and the port, as Time Warner Cable tech rep recommended, but to no avail. They recommended I delete my current email account and recreate it, but that I check with Apple first, because I might lose my contact list (and any email messages I'd previously saved!?). They suggested Apple might be able to tell me how to not lose the contacts, emails, profile.
Any help would be appreciated.Hi, what Interface are you using, & which one are you checking?
Each Interface will have it's own settings.
Though all of these steps may or may not be needed, I'm including them all.
Make a New Location, Using network locations in Mac OS X ...
http://support.apple.com/kb/HT2712
10.7 & 10.8…
System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
10.5.x/10.6.x/10.7.x instructions...
System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
The interface that connects to the Internet should be dragged to the top of the list.
10.4 instructions...
Is that Interface dragged to the top of Network>Show:>Network Port Configurations.
If using Wifi/Airport...
Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
208.67.222.222
208.67.220.220
(There may be better or faster DNS numbers in your area, but these should be a good test).
Click OK. -
My Toshiba laptop just recently started showing the the following error message when I try to open iTunes: " iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 998)". I did what was requested and reinstalled iTunes, but still get this error message. Help!
b noir I never got any message about an entry point
Many thanks. If we're looking at a "naked" Error 7, I'd start with box two in the following user tip:
Troubleshooting issues with iTunes for Windows updates -
iTunes was not installed correctly. Please reinstall iTunes. Error 7 (Windows error 5). I have uninstalled in correct order and reinstalled but still getting same error message. Any help??
Take a look at iTunes for Windows: "Error 7" message when opening iTunes. Perhaps your .NET Framework needs a repair.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
I have a gift card that has been redeemed once but still has money on it how do I reredeem it?
I have a gift card that has been redeemed once but still has money on it how do I reredeem it? If possible
Expanding on what Niel said, once you redeem a gift card, the amount of the card is registered in your iTunes Store account and the card can be trashed. All you need do now is log into your iTunes Store account, the one you redeemed the card through, and make purchases. The cost will be deducted from your credit balance automatically.
A couple of caveats/warnings:
- you can buy anything in the iTunes Store with the balance other than a gift for someone else;
- if you don't have a credit card also registered to your account, keep careful watch on your balance so you don't overspend it. If you do, the purchase will go through but you won't be able to download anything else, even free content or items you already purchased, until you add another gift card or a credit card to cover the amount you owe.
Regards. -
Hello, today I am subscribed to photoshop CC but still has not passed and the activation of the post did not come serial number that do tell me?
creative cloud does not use a serial number. it uses your adobe id.
download the creative cloud desktop app (after signing in with your adobe id), Download Adobe Creative Cloud apps | Free Adobe CC trial
and use the desktop app to install your adobe creative cloud programs.
if you already have the cc desktop app and you need to refresh your adobe id, Sign in, Sign out | Creative Cloud desktop app -
i am trying to review my new apple id and install skype and wats up. i given all credit card details but still its showing error.. pls advise me
Same here and this is driving me crazy. I can buy, but can't upgrade. Grrr.
-
is there a iMovie HD that works with intel processors but still has all the conversion features like iMovie Hd 5.02.(111)
iMovie version 6.
-
My iphone has a black screen and wont turn on, but still has vibrations. How can I fix it?
My iphone wont turn on but still has functions, how do I fix it?
Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data by resetting.
If this does not work, try to connect in recovery mode, explained here:
iOS: Unable to update or restore -
Still getting compilation error
thnx again for ur kind help
i m still getting compilation error
can any give me the complete steps and a simple program of occi using i which i can have the idea of occi program
its very urgent
Regards
NeerajCheck occidml.cpp under %ORACLE_HOME%\rdbms\demo and make.bat in the same directory on how to compile & link.
-
Major Bug in SSIS 2012 Script Component - Potentially
I think there is a major issue with the Script Component in SSIS when running SSDT on Windows 8.1. I have a Script Component that functions as a data source. The script compiles successfully. However, when returning back to the Data Flow Task, I still get the
following error which I'd get when an error exists in the Script.
Validation error. Data Flow Task Script Component [2]: The binary code for the script is not found. Please open the script in the designer by clicking Edit Script button and make sure it builds successfully.
The script compiles successfully so this is frustrating. This is incorrect and I believe it's an issue with SSDT/SSIS when run on Windows 8.1. I've applied SQL Server 2012 SP1 with CU7 and the error still exists. Can someone else confirm this as
a bug?
<a href="http://martinsbiblog.spaces.live.com" target="_blank">http://martinmason.wordpress.com</a>I'm simply doing the following:
Add a Data Flow Task.
Add a Script Component. Configure as a Source.
Double click on the Script Component.
Click on the Edit Script button.
Compile the script. Compiles successfully.
Close the VSTAProject editor.
Close the Script Component properties page.
When returning to the Data Flow, the "Binary code for the script is not found" error is return
Running as an Administrator did not solve the problem. Again, this is only an issue with SSIS on Windows 8.1 so if you're not running on Windows 8.1, do not bother replying. I've applied SP1 and CU7 and the problem was not resolved.
Really regretting upgrading to Windows 8.1.
<a href="http://martinsbiblog.spaces.live.com" target="_blank">http://martinmason.wordpress.com</a> -
Hi Anil, I was able to compile the Maven test build successfully but still has errors.
Hi Anil, I am not able to compile the Maven test build successfully but still have errors/warning messages. Can you please help me or tell me if I can
processed with the tutorials. Thanks.
<project xmlns="http://maven.apache.org/POM/4.0.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-
instance" xsi:schemaLocation="http://maven.apache.org/POM/4.0.0 http://maven.apache.org/xsd/maven-4.0.0.xsd">
<modelVersion>4.0.0</modelVersion>
<groupId>Maven-Test</groupId>
<artifactId>Maven-Test</artifactId>
<version>0.0.1-SNAPSHOT</version>
<packaging>pom</packaging>
<dependencies>
<!-- check if <sap.cloud.sdk.version> and <sap.cloud.sdk.path> in settings.xml are correct -->
<!-- SAP HANA Cloud SDK dependency -->
<dependency>
<groupId>Maven-Test</groupId>
<artifactId>Maven-Test</artifactId>
<version>1.48.16</version>
<scope>system</scope>
<systemPath>C:/dev/hanacloud.sdk/1.48.16</systemPath>
</dependency>
<!-- check if <eclipse.path> and <sap.cloud.ui5.version> in settings.xml are correct -->
<!-- SAPUI5 dependency -->
<dependency>
<groupId>Maven-Test</groupId>
<artifactId>Maven-Test</artifactId> (I am getting error here)
<version>1.18.8</version>
<scope>system</scope>
<systemPath>C:/dev/eclipse</systemPath>
</dependency>
</dependencies>
</project>
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
SLF4J: Failed to load class "org.slf4j.impl.StaticLoggerBinder".
SLF4J: Defaulting to no-operation (NOP) logger implementation
SLF4J: See http://www.slf4j.org/codes.html#StaticLoggerBinder for further details.
[INFO] Scanning for projects...
[WARNING]
[WARNING] Some problems were encountered while building the effective model for Maven-Test:Maven-Test:pom:0.0.1-SNAPSHOT
[WARNING] 'dependencies.dependency.systemPath' for Maven-Test:Maven-Test:jar should use a variable instead of a hard-coded path C:/dev/hanacloud.sdk/1.48.16 @ line 16, column 14
[WARNING] 'dependencies.dependency.systemPath' for Maven-Test:Maven-Test:jar should use a variable instead of a hard-coded path C:/dev/eclipse @ line 25, column 15
[WARNING] 'dependencies.dependency.(groupId:artifactId:type:classifier)' must be unique: Maven-Test:Maven-Test:jar -> version 1.48.16 vs 1.18.8 @ line 20, column 14
[WARNING] 'dependencies.dependency.systemPath' for Maven-Test:Maven-Test:jar refers to a non-existing file C:\dev\eclipse @ line 25, column 15
[WARNING]
[WARNING] It is highly recommended to fix these problems because they threaten the stability of your build.
[WARNING]
[WARNING] For this reason, future Maven versions might no longer support building such malformed projects.
[WARNING]
[INFO]
[INFO] ------------------------------------------------------------------------
[INFO] Building Maven-Test 0.0.1-SNAPSHOT
[INFO] ------------------------------------------------------------------------
Downloading: http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.pom
Downloaded: http://repo.maven.apache.org/maven2/org/apache/maven/plugins/maven-clean-plugin/2.4.1/maven-clean-plugin-2.4.1.pom (5 KB at 4.3 KB/sec)
[INFO]
[INFO] --- maven-clean-plugin:2.4.1:clean (default-clean) @ Maven-Test ---
[INFO] ------------------------------------------------------------------------
[INFO] BUILD SUCCESS
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 3.507s
[INFO] Finished at: Mon Mar 24 02:27:14 EDT 2014
[INFO] Final Memory: 5M/99M
[INFO] ------------------------------------------------------------------------It's probably best to close thread and that I start a new one. I think that I have gone off on a tangent here. Yes SSIS isn't doing much of a job in reporting errors but my main concern is the error itself.
I am trying to port an SSIS Script Task from SQL 2008 to SQL 2012. Is uses the ReportExecution2005 web service to run SSRS reports. The really strange thing is that, even though the same web reference is used, different methods seem
to be available in SQL 2008 and SQL 2012. This doesn't sound right to me, if you refer to the same Web Service you should see the same metros or am I wrong about that.
For example in SQL 2008 there is ReportExecutionService
object but on the SQL 2012 to service there only seems to be
ReportExecutionServiceSOAPClient.
R Campbell
Maybe you are looking for
-
1. How can i read every line in a text file and only remove the first word of each line and put it in a new text file. 2. How to read a text file that has numbers and ask it to display the largest, smallest and the average of all the numbers. I'm loo
-
How to map sales return process from customer to mfg plant without Depot??
Dear All we have a Mfg plant (mfg1) & having seven Depot. regular process of STO DEPOT process ME21N-Purchase order STO VL10B - Replenishment delivery VL02N - PGI VF01- Proforma invoice J1IIN - Excise invoice MIGO - Goods Receipt J1IG - Excise Captu
-
I just tried to back up a video I shot on mini tape. The file size was over 13G for the 60 minute tape. The DVD disc that I'm using is Verbatim and is rated 4.7 GB/Go DATA 120 minutes of video (60 minutes HD, 120 minutes SP, 180 minutes LP, and 240 m
-
I am getting AUT.JPG as a file name format. I can see some of these picture as a thumbnail but not all of them. When I try to view them it gives me a red screen with a message "unsupported image format" I use Projects and Albums to sort my pics. What
-
How to make config to Make GR before IR in Imports
Hi All, Our Client has configuration Imports Pricing procedure as per the flow:- 1. ME21N 2. MIRO - Customs 3. J1IEX Part 1 4. MIGO & Part 2 5. MIRO For Local PO 1. ME21N 2.GR 3.MIRO Now for one new scenario in imports we need to define the prici