Standard bapi to fetch the line managers for particular User

Hi,
Is there any BAPI to fetch the Line Managers for particular user. If so could any one help me out with the same.
Regards,
Ram

Hi Ram
Please check
SWX_GET_MANAGER 
HRCM_ORGUNIT_MANAGER_GET
Check the following thread
Function module to get Manager
Regards,
Arun

Similar Messages

  • Reg:tasks are not getting displayed in the uwl mss for particular user

    hi all
    Tasks are not getting updated in the MSS under tasks tab for particular user in EP.can any one please share their exp and knowledge on this how to reslove it.
    Thanks in advance.
    Deepika

    Hi Sateesh,
    This message will appear if either the background jobs are not scheduled, or UWL cannot tell that the background jobs are scheduled. The message no longer appears once you ensure the background jobs are scheduled to run via the user id UWL_SERVICE and that user is mapped to my portal user ID UWL_SERVICE.
    Kai

  • Menu Exclusion for particular users

    Hi All,
    I don't think there is a way for my requirement but still want to check with you all if I can get any other solutions for this.
    For a custom responsibility can we exclude the Menu items for particular users. For example the menu items are Reports1, Reports2. User1 should only have access to Reports1 and user 2 for Reports2. Can we do it by any profile options or how to achieve this.
    Any help would be appreciated.
    Thank You!!

    Hi,
    Can you please confirm whether you wish to exclude menu or reports.
    But anyway that being requested, if you wish to exclude a specific menu only to a particular user whilst having them to other user is not possible unless you create a different menu and assign it to a new responsibility and then assign it the user.
    The same is applicable to the reports, but the same layout should be followed on request groups.
    Thanks &
    Best Regards

  • How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.

    How to enable Fullfillment set menu in the Right click at the line level for a responsibility?, by default it comes for OM ADMIN.
    for this responsibility i need to have teh sets enabled. how to do teh same.
    similar to OM ADMIN as shown below:
    Kindly advice on teh steps. i believe its some menu /function inclusion can you pl share teh pointer.
    regards,
    bala

    AFAIK then there is no way to do that system wide. You can only do that via userChrome.css or an extension like the Menu Editor per profile .You can install extensions globally, but the user will have to enable them anyway. That is not required for userChrome.css code.

  • SQL query to fetch the catalog category for a PLM item

    Hi All,
    Can anyone help me with a sql query of how we can fetch the catalog category for a PLM item.
    Regards,
    Shruti

    Hi,
    You could monitor the SMSProv.log when you check the category of an application. It shows that SQL query the SCCM provider used is related to function fn_ListCategoryInstances.
    Best Regards,
    Joyce

  • BAPI to get cost line items for Cost Centers

    Hi,
    does anybody know a BAPI to get
    cost line items for Cost Centers
    or other Cost Center data?
    e.g. actual, plan, commitments
    I'm thankful for help.

    hi,
    check this BAPI <b>BAPI_COSTCENTER_GETDETAIL1</b>
    regards
    vijay

  • Is there any standard BAPI to update the standard transaction GS03 ?

    Is there any standard BAPI to update the standard transaction GS03 ?
    Moderator message: please do more research before asking, show what you have done yourself when asking.
    [Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
    [Asking Good Questions in the Forums to get Good Answers|/people/rob.burbank/blog/2010/05/12/asking-good-questions-in-the-forums-to-get-good-answers]
    Edited by: Thomas Zloch on Jun 16, 2011 2:02 PM

    hi,
    I think this link will help you to find that.
    list of all bapis:
    http://www.planetsap.com/LIST_ALL_BAPIs.htm

  • Module pool ---Problem in finding the line index for the table control

    Hi Friends,
    I am working in Module pool programming.
    My requirement is when i select any record on the lead selection I need to find out the index of the line on which  row i have selected.
    Could any one please suggest me the proper solution how to get the line index for the table control in module pool programming.
    Thanks
    Satish Raju

    Hi Raju,
    Follow the steps
    <li>U should take one variable in your internal table or in structure which is used for table control fields.
          DATA :BEGIN OF itab OCCURS 0 ,
                mark TYPE c ,
                matnr LIKE mara-matnr ,
                matkl LIKE mara-matkl,
                maktx LIKE makt-maktx,
            END OF itab .
       controls: tabc types tableview using screen 100.
    <li>This mark variable should be given in Table control properties. follow the path
    double click on the table control-->attributes .->select w/SelColumn and in that give itab-mark.
    <li>Flow logic of the screen
       process before output.
         MODULE status_0100.
         LOOP AT itab with control tabc
         endloop.
       process after input.
         module cancel at exit-command.
         LOOP AT itab.
           MODULE read_table_control.
         ENDLOOP.
         MODULE user_command_0100.
    <li>read_table_control module code
         MODULE read_table_control INPUT.
         MODIFY itab INDEX tabc-current_line."this will update the itab table
                                             "mark field with 'X ' whatever we
                                             "have selected on table control
         ENDMODULE.
    <li>If you want to Delete some of the records from Table control follow this code u2026Create one pushbutton and give Fucnction code to that and write below code
       CASE okcode.
         WHEN 'DELETE'.
           LOOP AT itab WHERE mark = 'X'.
             DELETE itab.
           ENDLOOP.
       ENDCASE.
    I hope that it helps you.
    Thanks
    Venkat.O

  • Invoicing the line irrelavant for billing

    Hi Gurus,
    We had created one text item category ZTR as an  item category which is not relavant for billing and pricing.
    There is a material with item category ZTR which is used in sales document type : CR. This material is not relavant for billing and hence this material should not be considered for invoicing.
    However, when i am trying to invoice the Credit memo request with billing type G2 ( credit memo), this item is also considered for billing and hence we are getting an error : Item 10 G2 CR ZTR not relavant for billing.
    I have a question. When i am flagging a material as not relavant for billing, why is the line considered for billing ?
    There is no copy control maintained for that item category.
    please help.
    regards,
    Krishna

    Hi Lakshmipathy,
    In the VTFA transaction , there is no copy control maintained for this item category.
    However, while creating the billing document, (since the document type is irrelavant for delivery) the item ZTR is also considered for billing.
    regards,
    Krishna

  • Assign the line IDs for CO area 1000 version 0 RA key 000002

    Assign the line IDs for CO area 1000 version 0 RA key 000002
    Message no. KJ207
    Diagnosis
    You are attempting to perform WIP calculation or results analysis with results analysis version 0. However, the assignment of cost elements for the order or project to line IDs has not yet been defined for this results analysis key. controlling area 1000.

    Can you  tell me the T-code from which you are getting this error.

  • Fetching the Manufacturing Plant for a Batch.

    Hi Everyone,
    Could y'all tell me How do I Fetch the Manufacturing Plant for a particular Batch. The Mfg.Plant has to be displayed in an alv report.
    Thanks and Regards,
    Neo

    hi Neo ,
    check tables MCHA/B/* .
    check MCHB not A.
    Regards
    Prabhu

  • Keep track of the shopping cart for anonymous user

    Hi,
    I have the following problem on b2c site. Anonymous user can browse through the site and adds items to the shopping cart. At the checkout the login page is prompted, however login page is located on the different application server where the actual login happening. After that control is returned to my server where I need to create login object and associate the shopping cart with it. My problem is how to maintain shopping cart without losing it.
    I came with that solution : On checkout attach shopping cart to context object with unique key, then pass this unique key to the remote server, then remote server passes it back to me together with the login id, then I create new session and attach shopping cart to it after retrieving shopping cart from the context.
    I hope it will work, however I think there is a standard solution for this type of the problems. Any ideas, hints, suggestions are strongly appreciated.
    We use WebLogic 9.0 and Servlets.

    Do you have a problem keeping track of the shopping cart for a user who is logged in? No, I didn't think so. So give the anonymous user an internal name, just for your own convenience. Then keep track of the shopping cart for the user with that name. You already know how to do that.

  • How do I use the same profile for two users on the same computer

    I use my laptop both at home and at work. And in each venue I use a different user log on. But I wish to have firefox use the same profile for each user log on. How can I get firefox to point to the same profile for each user?

    Note that only one user (Firefox instance) can use a profile folder at the time, so if you would switch the Windows user to another account then you would first have to close Firefox.
    * http://kb.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows
    * http://kb.mozillazine.org/Shortcut_to_a_specific_profile
    * http://kb.mozillazine.org/Using_multiple_profiles_-_Firefox
    * http://kb.mozillazine.org/Bypassing_the_Profile_Manager

  • How do I add the rotate button to the main toolbar for all users

    How do I add the rotate button to the main toolbar for all users. I have a Windows 2003 Citrix farm with Adobe Reader 8. I can add it user by user but I want to add it to all users at once. All users need this rotate button,
    Thanks in advance
    ND

    Try the Reader forum. I have no clue.

  • Can we delete the views created for a user in Oracle BPM J2EE WL

    I am using Oracle BPM 10.3 MP2 Enterprise Edition
    Version: 10.3.2
    Build: #100486
    Can we delete the views created for a user in workspace?
    Usually we are using the filter option within workspace and then saving it as view.
    Would like to know if we can delete such views and create again.
    These views are user specifc
    Thanks in Advance.
    -Sree

    I usually use this scripts to clean the workspace user custom seetings:
    delete from fuego_objclassinst where fuego_objclassname = 'bea.albpm.workspace.layout';
    delete from fuego_strprops where (fuego_category = 'fuego-view' OR fuego_category= 'fuego-presentations');
    delete from fuego_strprops where (fuego_category = 'WAM' );
    Hope this help.
    Regards

Maybe you are looking for