Standard or Progressive JPEG for DVPAL sequence

Hi,
I've read a lot concerning jpeg imports in FCP. But there's one step i can't find.
I've preparing picutre footage in photoshop and saving as JPEG. They are then imported in an FCP DV PAL anamorphic sequence.
When i animate the picture (simple rescaling and panning), the movements aren't very fluid (haven't checked the result on external monitor yet, or after export)
When saving the JPEG in photoshop, what Format option would be the best in this case (Baseline, Baseline Optimized, or Progressive). And could that have an effect on the issues i've been having with animation.
thanks in advance for your help...
tee

Thanks olivier,
I did indeed render the timeline.
Upscaling is done in FCP but never exceeds 100% because rescaling is done beforehand in photoshop.
What i do is actually work with the pictures in their original size in photoshop (square pixels), crop if needed, adjust contrast, and save as Jpeg. Pictures are 3456 x 2304.
Should i be importing them into a DVPAL widescreen photoshop project with 1,42 pixel aspect ratio, or should i be ok this way.
And if so, how would i not get deformation issues when importing in a DVPAL widescreen canvas?
thanks again;
tee.

Similar Messages

  • What quality should I save progressive jpegs for e-commerce products?

    Should I save them as low (3), medium (5) or high (8). I want my images to load as fast as possible and still look good. My images are 1024 x 1024.

    Use the "Save for Web" option.  Put in the resolution you want, and then dial down the quality, it will show you what it looks like.  Go as low as you're willing given the quality it shows.

  • How to use progress bar for Main and Subsequences in teststand

    HI,
    I have one main sequence in that I am calling different subsequences (Containing many steps and for loop).
    I am trying to use progress bar for this sequence, but my requirement is progressbar is able to show the progress of all the steps containing in Main and subsequences.
    I have developed sequence in that I am able to show the progress for only Main sequence steps not for subsequences steps.
    Is it possible? If yes please let me know the suggestions.
    Thank You

    Hi Santosh
    Here you are
    Greetings
    Juergen
    never Double Click on Submit
    Message Edited by j_dodek on 08-05-2008 08:05 AM
    =s=i=g=n=a=t=u=r=e= Click on the Star and see what happens :-) =s=i=g=n=a=t=u=r=e=
    Attachments:
    Progress_ts351.seq ‏52 KB

  • Progressive works for PAL & NTSC?

    I know the difference between PAL and NTSC, however, will a progressive file play on either?
    I'm making a video for someone from NY going to show as part of their Powerpoint presentation in Australia and I understand that Australia is PAL.
    I really don't know what kind of equipment they will be using.  I can only assume it's a laptop into a projector.
    My thoughts have always been that digital/progressive would play in both.   I'm thinking of started my project with the HDV 720P setting.  
    Why, because it's HD and that's the settings I use for Youtube which is where this video will also go besides the live presentation.
    Thanks in advance for any clarificaton on my question.

    There is my confusion.   I choose Export/Media, Format: H.264, the Basic Video Settings box only give you the two bullet point optons for TV Standard: NTSC or PAL.  My sequence is Progressive.  All the Preset choices seem to be either one of them too.
    I think I have to approach it differently like I am writing in the following paragraph.....
    That is another question I have between choosing Format: H.264 or Quicktime (which is what I really want).
    I can choose Format: Quicktime, but all the Presets: are NTSC 720x480.  But, I can choose a different Video Codec:  Whatever I choose, the width/height stays at 720x480.  So, then I change it to my Source setting which is 1280x720.  When I select Field Type: Progressive, the Summary output: , the NTSC goes away.   I guess that is what I want.  

  • DVCPROHD 720P960 to a dvpal sequence

    Hi to all,
    I am currently working on footage shot and captured in DvcproHD720p60i. I just learned that the work would be used in dvpal format using a sony dvcam deck!
    I am not familiar with this format but it seems that the operator messed up and shot this footage in ntsc. I am therefore editing in a dvcpro720p60i sequence with clips that are 960x720, at 59,94 frame/sec.
    When rendering in a dvpal sequence, at 25f/s, I expectedly get a playback that isn't smooth. I there anyway i can output this in a letterboxed dvpal movie without having this problem.
    Is converting the output from NTSC to PAL the only solution? If so, would i need to output as quicktime sequence using the DVCPRO HD sequence settings, get that result converted by a post company, and then import into a DVPAL sequence to get my DVPAL letterboxed output?
    Or is there some other solution? I've got one day left to figure this out
    Thanks for your time,
    tee.

    Well, typically I'd use the STANDARDS CONVERTER from www.nattress.com to convert 25fps to 30fps and vise versa. Not sure if it does this for 60i to 50i. But, you can download the demo and see for yourself.
    Shane

  • "low memory" in exporting to progressive JPEG

    hi, anyone knows how to deal with "low memory" or "low virtual memory" error when export file to progressive JPEG?  it happens when file is from a few mb to 30 mb. if file is only under 1mb will be ok.  I got pretty new pc: xp pro with dualcore 2.6 ghz and 4 gb ram, but it can not export 10 mb indd file to progressive JPEG. i did adjust page file to max 20000mb. but does not work.  thanks for help.

    it's only working a few times after  computer got fresh start or restart,  then"low memory" msg up again and can not to export progressive jpeg as 300 resolution.  anyone has ever experienced this issue?  is it possible that RAM type does not match with motherboard?

  • Progress confirmation for process order

    Hello to all,
    I want to use the progress confirmation functionality for process order. I know that it is possible for production orders, but I couldn't find respective transaction for process order. Do you know if it is possible to use progress confirmation for process orders.
    BR,
    Nikolay

    Thanks for your inputs, but they are not useful!
    COR6 - it cannot be used once the order is confirmed at phase level;
    COOISPI - it's a report
    COR6N -it is the standard transaction for process order confirmation
    I want to do so-called "unplanned milestone" for process orders, something similar to CO1F for production orders.
    BR,
    Nikolay

  • Standard Condition type used for Manual freight at item level

    Hello Gurus
    Can you please tell me the standard condition type used for entering freight manually at header as well as item level.
    Warm Regards
    Prashant Joshi.

    Prashanth,
    The freight Conditions that we use in Sales are two types
    HD00 - Header Level, wherein we have no access sequence
    KF00 - Item level, Wherein we have access sequence  KF00 - Freight
    But you want the condition types to be maintained manually, then you need item details screen of the respective condition type HD00/KF00 using Tcode V/06.
    Inside that Manual entry as "C". Similarly you need to maintain or activate "Manual" Indicator in pricing procedure. Then you can enter the freight Manually.
    Note:
    The difference In applying at the header level and item level is if you enter freight value at the header level it is applicable to all items in the item level. But if you want to apply freight  we can give freight to each item or selective item.
    Regards
    Sathya

  • Settings for Parellel sequence in routing

    Pl. tell me hoe to do settings for Parellel sequence in routing , if there are 4 opn s , 10, 20 ,30, 40 .
    10,20,40 are in standard seq. , but  30 is in parellel with 20.
    pl. revert.
    Regards,
    RM

    Hi,
    In your standard sequence, create operations 10, 20 & 40 as per normal.
    Now click on Sequence icon (Ctrl + F5), then click on new & in the pop up box select parallel operation.
    In the popup box give a meaningul description, give the branch & return operation as 0020. Now a parallel sequence is created, double click on this one & add the operation 30 in this.
    You can go to the graphical view & check if it as per your need.
    Hope the above solves the issue.
    Regards,
    Vivek

  • Progress dialogs for (eager and lazy) downloads

    <resources progress="all-downloads">
    </resources>
    Where 'progress' values are
    "standard" - default behaviour if omitted - progress
       dialog for eager downloads only
    "all-downloads" - progress dialog supplied for all
       downloads, eager or lazy.
    "none" - (suggest) no progress dialogsThe 'progress' attribute is not something in the
    web start API, but I would like to see it added.
    The intent is to allow the JNLP file to suggest a
    behaviour for progress dialogs during the download
    of both eager and lazy resources.
    Currently (web start in 1.5), there is no progress
    dialog, or message of any kind, during the download
    of 'lazy' resources.
    My questions.
    Is it technically feasible to provide this ability?
    Does it conform to the web start ..framework?
    Would an RFE to add support for this 'progress'
    attribute (call it what you like) be well received
    (or disappear into the abyss as some other
    requests assigned an ..'internal review ID'
    sometimes seem to)?
    More generally to other forum members, is
    this something that is important to you?
    Would you vote for an RFE to support the
    progress dialog attribute?

    ScheduleWorld used to use around 40 jars and I noticed a big speedup when I started using the version protocol. Now, my httpd logs only report a HTTP HEAD request on the jnlp file (sometimes icon image too?) and the app starts quite fast. I use less jars now but I am sure the main thing is the switch to the version protocol.
    With the version protocol, the client can determine if it has all of the right versions without making network connections. If you have a slow network connection (like a modem) and/or your server has keepalive disabled and is rate-limited to the number of new connections/second to the same IP you could see exactly what you are describing.

  • After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it.

    The page load progress bar that was on the lower right of the window is no longer there. After updating to the latest version of Firefox on my Mac there is no progress bar for the page load. I really miss this feature and can't seem to find a way to obtain it. The tab has a circular progress wheel but this is useless for determining a stuck or slow loading page.
    PLEASE NOTE: I am typing this in from a Windows based work computer but am asking about my Apple MacBook Pro that i use at home.

    Firefox 4 saves the previous session automatically, so there is no longer need for the dialog asking if you want to save the current session.<br />
    You can use "Firefox > History > Restore Previous Session" to get the previous session at any time.<br />
    There is also a "Restore Previous Session" button on the default <b>about:home</b> Home page.<br />
    Another possibility is to use:
    * [http://kb.mozillazine.org/Menu_differences Firefox (Tools) > Options] > General > Startup: "When Firefox Starts": "Show my windows and tabs from last time"

  • When opening my Outlook 2010 with new added e-mail account with Exchange Server, I have to click manually on my standard e-mail account for checking mail

    When opening my Outlook 2010 with new added e-mail account with Exchange Server supplied by my employer, I have to click manually on my standard e-mail account for checking mail. Do I have to upgrade my Microsoft Office 2010 or how can I make my Outlook
    2010 check all my four e-mail accounts without manually click on my accounts?
    Sincerely
    Ketil Hothorp

    Hello Ketil,
    Good Day...
    Seems to be the Issue is Syncing emails, now I would recommend you to Remove and Add the Account and try and check if the emails are getting synced automatically.
    Hope this is with Single User. If it is with Multiple Users then we need to check the permissions assigned.
    Regards,
    Praveen

  • Using multi-threading: Setting a VI to be used for two sequences at same time

    I have two sequences running as two different threads. This is supposed to be in parallel but both sequences access the same VI, then they're not executing as parallel because one sequence use this VI then liberates it and the other sequence use it, and so on consecutively until both sequences finish. This is not what I want.
    How can I do to set this VI with any kind of property or something that can be accessed for both sequences at the same time?
    Thanks,

    Hi Margarita, you can set a VI to be reentrant (under VI Setup»Execution Options from TestStand, this function can also be used from LabVIEW) . Now depending on the king of VI you are using this can be something safe or can cause trouble. If the VI needs to keep information (for example a Functional Global Variable) or it is handling Hardware it can give you errors (for example trying to access the same DAQ at the same time from different task.
    If you need more information can you tell us what does this VI does?
    This Links might also be useful:
    When I Run Parallel TestStand Executions That Call the Same VI, Why Don't the VIs Run in Parallel?
    Differences Between Reentrant VIs (Preallocate), Reentrant VIs (Share Clones), VI Templates, and Dyn...
    Best Regards
    Benjamin C
    Senior Systems Engineer // CLA // CLED // CTD

  • Best practice standard User Acess Test for WIN2012 AD

    What is the Best practice standard User Acess Test  for WIN2012 AD

    Hello,
    as before, add a computer to the domain and log on with a domain user account to the computer.
    You should be able from the client machine to open the sharedfolders on the DCseither with:
    \\DCName\sysvol
    \\DCName\netlogonor \\NetBiosDomainName\sysvol
    \\NetBiosDomainName\netlogon
    Best regards
    Meinolf Weber
    MVP, MCP, MCTS
    Microsoft MVP - Directory Services
    My Blog: http://blogs.msmvps.com/MWeber
    Disclaimer: This posting is provided AS IS with no warranties or guarantees and confers no rights.
    Twitter:  

  • I am retired.  In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment.  I recently spent a fortune to migrate to  Apple.  I realize that my licenses are not recognized by Adobe. I am desperate

    I am retired.  In my active years, I purchased Adobe Creative Suite 4 Design Standard and Dreamweaver CS5 for my Windows environment.  I recently spent a fortune to migrate to  Apple.  I now (and a bite late) realize that my licenses are not recognized by Adobe. I am desperate. I cannot afford the expense of buying or paying access to the software and, still,  I need the tools for all those little things I do for enjoyment. What can be done?

    The licenses are operating system specific, so one option would be to retain use of the Windows machine you had before the Mac.
    If you want to try to use the older stuff on your new Mac you can try installing Windows emulation software such as Bootcamp.

Maybe you are looking for