Standby not in sync
Hi ,
Oracle version 10.2.0.3.0(windows server)
My standby db was out of sync due to missing log. I have done the following steps
1. alter database recover managed standby database cancel;
2.recover standby database until calcel;(recovered till last generated log)
3.ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION;
after that i checked the MRP process using below command,
select process,status from v$managed_standby;
PROCESS STATUS
ARCH CONNECTED
ARCH CONNECTED
MRP0 WAIT_FOR_LOG
But the problem now is no archivelog copying to the standby server autmoatically.
I switched logfile in the primary but the log is not transferring to standby. Please help.
Regards
Arun
Standby alert log
Fri May 28 20:53:17 2010
ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30755_0672478691.001'
There are 1 logfiles specified.
ALTER DATABASE REGISTER [PHYSICAL] LOGFILE
Resynchronizing thread 1 from sequence 30754 to 30755
Completed: ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30755_0672478691.001'
Fri May 28 20:53:17 2010
ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30756_0672478691.001'
There are 1 logfiles specified.
ALTER DATABASE REGISTER [PHYSICAL] LOGFILE
Resynchronizing thread 1 from sequence 30755 to 30756
Completed: ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30756_0672478691.001'
Fri May 28 20:53:17 2010
ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30757_0672478691.001'
There are 1 logfiles specified.
ALTER DATABASE REGISTER [PHYSICAL] LOGFILE
Resynchronizing thread 1 from sequence 30756 to 30757
Completed: ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30757_0672478691.001'
Fri May 28 20:53:17 2010
ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30758_0672478691.001'
There are 1 logfiles specified.
ALTER DATABASE REGISTER [PHYSICAL] LOGFILE
Resynchronizing thread 1 from sequence 30757 to 30758
Completed: ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30758_0672478691.001'
Fri May 28 20:53:18 2010
ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30759_0672478691.001'
There are 1 logfiles specified.
ALTER DATABASE REGISTER [PHYSICAL] LOGFILE
Resynchronizing thread 1 from sequence 30758 to 30759
Completed: ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30759_0672478691.001'
Fri May 28 20:53:31 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
Fri May 28 20:53:31 2010
ORA-16136 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL...
Fri May 28 20:54:15 2010
ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30745_0672478691.001'
Fri May 28 20:54:15 2010
There are 1 logfiles specified.
ALTER DATABASE REGISTER [PHYSICAL] LOGFILE
Completed: ALTER DATABASE REGISTER LOGFILE 'J:\d801\oracle\vgsm\archive\ARC30745_0672478691.001'
Fri May 28 20:54:26 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
Fri May 28 20:54:26 2010
ORA-16136 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL...
Fri May 28 20:57:33 2010
Shutting down instance: further logons disabled
Fri May 28 20:57:33 2010
Stopping background process CJQ0
Fri May 28 20:57:34 2010
Stopping background process MMNL
Fri May 28 20:57:35 2010
Stopping background process MMON
Fri May 28 20:57:35 2010
Shutting down instance (immediate)
License high water mark = 5
Fri May 28 20:57:35 2010
Stopping Job queue slave processes
Fri May 28 20:57:35 2010
Job queue slave processes stopped
Fri May 28 20:57:35 2010
ALTER DATABASE CLOSE NORMAL
ORA-1109 signalled during: ALTER DATABASE CLOSE NORMAL...
Fri May 28 20:57:35 2010
ALTER DATABASE DISMOUNT
Completed: ALTER DATABASE DISMOUNT
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Fri May 28 20:57:38 2010
ARC1: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Fri May 28 20:57:45 2010
Archive process shutdown avoided: 0 active
ARCH shutting down
ARC1: Archival stopped
Fri May 28 20:57:46 2010
ARCH shutting down
Fri May 28 20:57:46 2010
ARC0: Archival stopped
Fri May 28 20:57:48 2010
ARCH: Archival disabled due to shutdown: 1089
Shutting down archive processes
Archiving is disabled
Archive process shutdown avoided: 0 active
Fri May 28 20:58:15 2010
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Picked latch-free SCN scheme 2
Autotune of undo retention is turned on.
IMODE=BR
ILAT =12
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.3.0.
System parameters with non-default values:
processes = 100
timed_statistics = TRUE
sga_max_size = 1258291200
__shared_pool_size = 318767104
shared_pool_size = 318767104
__large_pool_size = 8388608
large_pool_size = 0
__java_pool_size = 159383552
java_pool_size = 159383552
__streams_pool_size = 0
streams_pool_size = 0
sga_target = 1048576000
control_files = I:\D101\ORACLE\VGSM\CONTROL01_VGSM.CTL, I:\D102\ORACLE\VGSM\CONTROL02_VGSM.CTL, I:\D103\ORACLE\VGSM\CONTROL03_VGSM.CTL
db_block_size = 8192
__db_cache_size = 545259520
db_cache_size = 528482304
compatible = 10.2.0.1.0
log_archive_config = SEND,RECEIVE,NODG_CONFIG
log_archive_dest_1 = location=J:\d801\oracle\vgsm\archive arch mandatory VALID_FOR=(ALL_LOGFILES,ALL_ROLES)
log_archive_dest_2 = SERVICE=DR_bp1decap012_VGSM ARCH ASYNC DB_UNIQUE_NAME=VGSM REOPEN=60
log_archive_dest_state_2 = DEFER
standby_archive_dest = location=J:\d801\oracle\vgsm\archive
log_buffer = 15244288
db_files = 300
standby_file_management = MANUAL
fast_start_mttr_target = 1000
dml_locks = 500
undo_management = AUTO
undo_tablespace = UNDOTBS
undo_retention = 10800
remote_login_passwordfile= EXCLUSIVE
db_domain = world
global_names = FALSE
service_names = vgsmstdby
job_queue_processes = 10
cursor_sharing = EXACT
background_dump_dest = I:\D002\ORACLE\VGSM\DUMPB
user_dump_dest = I:\D002\ORACLE\VGSM\DUMPU
max_dump_file_size = 1024
core_dump_dest = I:\D002\ORACLE\VGSM\DUMPC
open_links = 10
db_name = VGSM
open_cursors = 2000
pga_aggregate_target = 2097152000
statistics_level = TYPICAL
aq_tm_processes = 1
PMON started with pid=2, OS id=1400
PSP0 started with pid=3, OS id=4604
MMAN started with pid=4, OS id=5340
DBW0 started with pid=5, OS id=5588
LGWR started with pid=6, OS id=5612
CKPT started with pid=7, OS id=592
SMON started with pid=8, OS id=2152
RECO started with pid=9, OS id=4164
CJQ0 started with pid=10, OS id=1288
MMON started with pid=11, OS id=5544
MMNL started with pid=12, OS id=5688
Fri May 28 20:58:15 2010
ALTER DATABASE MOUNT
Fri May 28 20:58:19 2010
Setting recovery target incarnation to 1
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=14, OS id=2700
Fri May 28 20:58:19 2010
ARC0: Archival started
Fri May 28 20:58:19 2010
ARC1: Archival started
ARCH: STARTING ARCH PROCESSES COMPLETE
Fri May 28 20:58:19 2010
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC0: Thread not mounted
Fri May 28 20:58:19 2010
Successful mount of redo thread 1, with mount id 2735738023
Fri May 28 20:58:19 2010
Physical Standby Database mounted.
Completed: ALTER DATABASE MOUNT
ARC1 started with pid=15, OS id=5748
Fri May 28 20:58:20 2010
ARC1: Becoming the heartbeat ARCH
Fri May 28 20:58:46 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
Fri May 28 20:58:46 2010
ORA-16136 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL...
Fri May 28 21:04:58 2010
alter database open read only
Fri May 28 21:04:58 2010
SMON: enabling cache recovery
Fri May 28 21:04:58 2010
Database Characterset is WE8ISO8859P1
replication_dependency_tracking turned off (no async multimaster replication found)
Physical standby database opened for read only access.
Completed: alter database open read only
Fri May 28 21:05:18 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
Fri May 28 21:05:18 2010
ORA-16136 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL...
Fri May 28 21:07:09 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT
Fri May 28 21:07:09 2010
Stopping Job queue slave processes
Fri May 28 21:07:09 2010
Job queue slave processes stopped
Fri May 28 21:07:09 2010
SMON: disabling cache recovery
MRP0 started with pid=16, OS id=4716
Fri May 28 21:07:10 2010
Stopping background process CJQ0
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 3 processes
Fri May 28 21:07:15 2010
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT
Fri May 28 21:07:15 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30743_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30744_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30745_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30746_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30747_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30748_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30749_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30750_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30751_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30752_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30753_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30754_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30755_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30756_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30757_0672478691.001
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30758_0672478691.001
Fri May 28 21:07:26 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30759_0672478691.001
Media Recovery Waiting for thread 1 sequence 30760
Sat May 29 00:01:21 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION
Sat May 29 00:01:51 2010
ORA-1153 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION...
Sat May 29 00:05:42 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
Sat May 29 00:05:55 2010
MRP0: Background Media Recovery cancelled with status 16037
Sat May 29 00:05:55 2010
Errors in file i:\d002\oracle\vgsm\dumpb\vgsmstdby_mrp0_4716.trc:
ORA-16037: user requested cancel of managed recovery operation
Recovery interrupted!
Sat May 29 00:05:58 2010
Errors in file i:\d002\oracle\vgsm\dumpb\vgsmstdby_mrp0_4716.trc:
ORA-16037: user requested cancel of managed recovery operation
Sat May 29 00:05:58 2010
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL
Sat May 29 00:06:11 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION
MRP0 started with pid=16, OS id=6100
Managed Standby Recovery starting Real Time Apply
parallel recovery started with 3 processes
Sat May 29 00:06:17 2010
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION
Sat May 29 00:06:19 2010
Media Recovery Waiting for thread 1 sequence 30760
Sat May 29 00:12:01 2010
ALTER DATABASE RECOVER standby database
Sat May 29 00:12:06 2010
ORA-1153 signalled during: ALTER DATABASE RECOVER standby database ...
Sat May 29 00:12:59 2010
alter database recover managed standby database cancel
Sat May 29 00:13:02 2010
MRP0: Background Media Recovery cancelled with status 16037
Sat May 29 00:13:02 2010
Errors in file i:\d002\oracle\vgsm\dumpb\vgsmstdby_mrp0_6100.trc:
ORA-16037: user requested cancel of managed recovery operation
Managed Standby Recovery not using Real Time Apply
Recovery interrupted!
Sat May 29 00:13:03 2010
Errors in file i:\d002\oracle\vgsm\dumpb\vgsmstdby_mrp0_6100.trc:
ORA-16037: user requested cancel of managed recovery operation
Sat May 29 00:13:04 2010
Completed: alter database recover managed standby database cancel
Sat May 29 00:13:14 2010
ALTER DATABASE RECOVER standby database
Media Recovery Start
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 3 processes
ORA-279 signalled during: ALTER DATABASE RECOVER standby database ...
Sat May 29 00:13:40 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:13:40 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30760_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:13:49 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:13:49 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30761_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:13:53 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:13:53 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30762_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:13:54 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:13:55 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30763_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:13:56 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:13:56 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30764_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:13:57 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:13:57 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30765_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:01 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:01 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30766_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:02 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:02 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30767_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:04 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:04 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30768_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:08 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:08 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30769_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:09 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:09 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30770_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:10 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:10 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30771_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:11 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:11 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30772_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:13 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:13 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30773_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:14 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:14 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30774_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:16 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:16 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30775_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:17 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:17 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30776_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:18 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:18 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30777_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:19 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:19 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30778_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:20 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:20 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30779_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:22 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:22 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30780_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:23 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:23 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30781_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:28 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:28 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30782_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:30 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:30 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30783_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:31 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:31 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30784_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:33 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:33 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30785_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:34 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:34 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30786_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:35 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:35 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30787_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:36 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:36 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30788_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:37 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:37 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30789_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:38 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:38 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30790_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:39 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:14:39 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30791_0672478691.001
Errors with log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30791_0672478691.001
ORA-308 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:14:39 2010
ALTER DATABASE RECOVER CANCEL
Sat May 29 00:14:39 2010
Media Recovery Canceled
Completed: ALTER DATABASE RECOVER CANCEL
Sat May 29 00:17:57 2010
ALTER DATABASE RECOVER standby database
Sat May 29 00:17:57 2010
Media Recovery Start
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 3 processes
ORA-279 signalled during: ALTER DATABASE RECOVER standby database ...
Sat May 29 00:18:01 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:18:01 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30791_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:18:04 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:18:04 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30792_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:18:05 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:18:05 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30793_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:18:06 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:18:06 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30794_0672478691.001
ORA-279 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:18:08 2010
ALTER DATABASE RECOVER CONTINUE DEFAULT
Sat May 29 00:18:08 2010
Media Recovery Log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30795_0672478691.001
Errors with log J:\D801\ORACLE\VGSM\ARCHIVE\ARC30795_0672478691.001
ORA-308 signalled during: ALTER DATABASE RECOVER CONTINUE DEFAULT ...
Sat May 29 00:18:08 2010
ALTER DATABASE RECOVER CANCEL
Sat May 29 00:18:09 2010
Media Recovery Canceled
Completed: ALTER DATABASE RECOVER CANCEL
Sat May 29 00:19:26 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE
Sat May 29 00:19:26 2010
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 3 processes
Media Recovery Waiting for thread 1 sequence 30795
Sat May 29 00:21:54 2010
Recovery interrupted!
Sat May 29 00:21:54 2010
Media Recovery failed with error 3135
ORA-283 signalled during: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE...
Sat May 29 00:22:06 2010
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION
MRP0 started with pid=16, OS id=5940
Managed Standby Recovery starting Real Time Apply
parallel recovery started with 3 processes
Media Recovery Waiting for thread 1 sequence 30795
Sat May 29 00:22:12 2010
Completed: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE USING CURRENT LOGFILE DISCONNECT FROM SESSION
Similar Messages
-
Standby not in sync with primary
Hi,
I am having oracle 9.2.0.7 on AIX and having physical standby database running on another server. Since the last 2 days it is not in sync and the required archivelog files are removed from production.
Could you please help me out to resolve the issue?
ThanxHi
Step 1 On the standby database, find the SCN which will be used for the incremental
backup at the primary database:
SQL> SELECT CURRENT_SCN FROM V$DATABASE;
Step 2 In RMAN, connect to the primary database and create an incremental backup
from the SCN derived in the previous step:
Step 3 RMAN> BACKUP INCREMENTAL FROM SCN <SCN from previous step>
DATABASE FORMAT '/tmp/ForStandby_%U' tag 'FORSTANDBY';
step 4 Transfer all backup sets created on the primary system to the standby system
SCP /tmp/ForStandby_* standby:/tmp
Step 5 Connect to the standby database as the RMAN target, and catalog all incremental
backup pieces:
RMAN> CATALOG START WITH '/tmp/ForStandby';
Step 6 Recover the standby database with the cataloged incremental backup:
RMAN> RECOVER DATABASE NOREDO;
Step 7 In RMAN, connect to the primary database and create a standby control file
backup:
RMAN> BACKUP CURRENT CONTROLFILE FOR STANDBY FORMAT '/tmp/ForStandbyCTRL.bck';
Step 8 Copy the standby control file backup to the standby system. For example:
SCP /tmp/ForStandbyCTRL.bck standby:/tmp
Step 9 Shut down the standby database and startup nomount:
RMAN> SHUTDOWN;
RMAN> STARTUP NOMOUNT;
Step 10 In RMAN, connect to standby database and restore the standby control file:
RMAN> RESTORE STANDBY CONTROLFILE FROM '/tmp/ForStandbyCTRL.bck';
Step 11 Shut down the standby database and startup mount:
RMAN> SHUTDOWN;
RMAN> STARTUP MOUNT;
Step 12 If the primary and standby database data file directories are identical, skip to step13. If the primary and standby database data file directories are different, then in
RMAN, connect to the standby database, catalog the standby data files, and switch
the standby database to use the just-cataloged data files. For example:
RMAN> CATALOG START WITH '+DATA_1/CHICAGO/DATAFILE/';
RMAN> SWITCH DATABASE TO COPY;
Step 13 If the primary and standby database redo log directories are identical, skip to step 14. Otherwise, on the standby database, use an OS utility or the asmcmd utility (if
it is an ASM-managed database) to remove all online and standby redo logs from
the standby directories and ensure that the LOG_FILE_NAME_CONVERT parameter
is properly defined to translate log directory paths. For example, LOG_FILE_
NAME_CONVERT=’/BOSTON/’,’/CHICAGO/’.
Step 14 On the standby database, clear all standby redo log groups (there may be more
than 3):
SQL> ALTER DATABASE CLEAR LOGFILE GROUP 1;
SQL> ALTER DATABASE CLEAR LOGFILE GROUP 2;
SQL> ALTER DATABASE CLEAR LOGFILE GROUP 3;
Step 15 On the standby database, restart Flashback Database:
SQL> ALTER DATABASE FLASHBACK OFF;
SQL> ALTER DATABASE FLASHBACK ON;
Step 16 On the standby database, restart MRP:
SQL> ALTER DATABASE RECOVER MANAGED STANDBY DATABASE DISCONNECT;
With this you can recvoer your Standby . I wish it will works for You.
Thanks
Karan -
Standby not in sync because test on primary of transportable tablespace etc
This environment is new build environment , have not in use yet.
db version is 11.2.0.3 in linux, both primary/standby are configured in RAC two nodes and storage are in ASM storage.
primary db had tested by migration data using transportable tablespace methods. So the datafiles imported were put in a local filesystem which I have to switch to ASM afterwards.
In such way, the standby db got the impression that datafiles should be in local filesystem and it got invalidated.
Here is the error from standby log:
ORA-01157: cannot identify/lock data file 4 - see DBWR trace file
ORA-01110: data file 4: '/stage/index.341.785186191'
and datafiles names are all in local filesystem in standby: /stage/...../
However in primary datafile names are all in ASM instance:
+DAT/prd/datafile/arindex.320.788067609
How to resolve such situation?
ThanksMy steps for transportable tablespaces after scp the datafiles to linux are import the transportable datafiles into the database. and then using rman to copy it to "+DATA' in asm. and then switch dababase to copy.
Those procedure all worked on primary.
The standby was built before the transportable tablespace when there are only system, users, tools etc basic tablespaces. it worked and in sync with primary. However everytime the primary tested data migration with the transportable tablespaces, it will not work.
so what is the right way to perform this migration? how can I made standby in sync with primary and to read the datafiles in ASM storage?
Is there a way before the RMAN command to transfer the filesystem datafile to ASM, can I copy those local filesystem datafiles to ASM storage ? then do a import transportable datafiles with those on ASM?If you added any datafiles manually then those will be created in standby also as per the settings,
But here you performing TTS, of course DML/DDLs can be transfered to standby by archive logs, but what about actual datafiles? Here in this case files exist in primary & those files not exist in standby
AFAIK, you have to perform couple of steps. Once after your complete migration done in primary do as follows. (Do test it)
1) Complete your migration on primary
-- Check all data file status and location.
2) Now Restore standby controlfile & newly migrated tablespaces in standby Database
-- here you can directly restore to ASM using RMAN, because you are taking backup in primary using RMAN. So RMAN can restore them directly in ASM file system.
3) Make sure you have all the datafiles where you want and take care no one data file is missing. Crosscheck all tablespace information in primary & standby databases.
4) Now start *MRP*
Here is my above plan, But I suggest to test it...
One question, After *successful migration* are you able to SYNC standby with primary earlier ? -
Checking Whether Physical Standby is in Sync with the Primary
I writing script to alert dba if primary and standby database are not in sync. I use article - How To Check Whether Physical Standby is in Sync with the Primary? ID 861595.1
It suggests comparing Last Sequence Generated on primary and Last Sequence Received on standby for each thread. And if they are not equal - NOT in sync.
My assumption is that if there are multiple threads we running RAC. Is it correct ?
And if we running RAC as far as I am aware it's sufficient to have one thread in sync.
Please comment on this
Thanks in advance
Edited by: user613441 on Jan 6, 2010 9:16 PM
Edited by: user613441 on Jan 6, 2010 9:17 PMdeleted
-
Dataguard configured using RMAN not in sync with Primary
Hi All.
I have configured physical standby using RMAN it has errored out as below message since the Physical standby is came in Mount state and it is not in sync with Primary.
$ rman target sys/oracle1@PROD_st_STBY auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Jul 29 13:27:02 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD_ST (DBID=609107922)
connected to auxiliary database: PROD_ST (not mounted)
RMAN> duplicate target database for standby dorecover;
Starting Duplicate Db at 29-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=156 device type=DISK
contents of Memory Script:
set until scn 239665;
restore clone standby controlfile;
executing Memory Script
executing command: SET until clause
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/07ngg1p6_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/07ngg1p6_1_1 tag=TAG20120719T140110
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/oracle1/oraerp/PROD_st/cont_.ctl
Finished restore at 29-JUL-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 07/29/2012 13:27:29
RMAN-05501: aborting duplication of target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/undotbs1.dbf conflicts with a file used by the target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/sysaux.dbf conflicts with a file used by the target database
RMAN-05001: auxiliary file name /oracle1/oraerp/PROD_st/system01.dbf conflicts with a file used by the target database
RMAN>
SQL> select name,open_mode from v$database;
NAME OPEN_MODE
PROD_ST MOUNTED
SQL> select name,db_unique_name,database_role from v$database;
NAME DB_UNIQUE_NAME DATABASE_ROLE
PROD_ST PROD_st_STBY PHYSICAL STANDBY
SQL>
SQL> alter database recover managed standby database disconnect;
Database altered.
SQL>
SQL> alter system set log_archive_dest_state_2=enable;
System altered.
SQL> sho parameter log_archive_dest_2
NAME TYPE VALUE
log_archive_dest_2 string LOCATION=/oracle1/oraerp/PROD_
st/arch/ VALID_FOR=(ALL_LOGFIL
ES,ALL_ROLES)
On Primary
==========
SQL> SELECT THREAD# "Thread",SEQUENCE# "Last Sequence Generated"
FROM V$ARCHIVED_LOG
WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)
ORDER BY 1; 2 3 4
Thread Last Sequence Generated
1 281
ON STANDBY
SQL> SELECT ARCH.THREAD# "Thread", ARCH.SEQUENCE# "Last Sequence Received", APPL.SEQUENCE# "Last Sequence Applied", (ARCH.SEQUENCE# - APPL.SEQUENCE#) "Difference"
2 FROM
3 (SELECT THREAD# ,SEQUENCE# FROM V$ARCHIVED_LOG WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$ARCHIVED_LOG GROUP BY THREAD#)) ARCH,
4 (SELECT THREAD# ,SEQUENCE# FROM V$LOG_HISTORY WHERE (THREAD#,FIRST_TIME ) IN (SELECT THREAD#,MAX(FIRST_TIME) FROM V$LOG_HISTORY GROUP BY THREAD#)) APPL
5 WHERE
6 ARCH.THREAD# = APPL.THREAD#
ORDER BY 1; 7
no rows selected
SQL>
SQL> SELECT THREAD#, LOW_SEQUENCE#, HIGH_SEQUENCE# FROM V$ARCHIVE_GAP;
no rows selected
SQL>
Please suggest solution.
Best Regards,
Edited by: user13707876 on 19-Jul-2012 02:04Hi,
It has worked now since error with warnings encountered as below:
$ rman target sys/oracle1@PROD_st_STBY auxiliary /
Recovery Manager: Release 11.2.0.1.0 - Production on Sun Jul 29 15:57:39 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: PROD_ST (DBID=609107922)
connected to auxiliary database: PROD_ST (not mounted)
RMAN> duplicate target database for standby nofilenamecheck;
Starting Duplicate Db at 29-JUL-12
using target database control file instead of recovery catalog
allocated channel: ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: SID=156 device type=DISK
contents of Memory Script:
restore clone standby controlfile;
executing Memory Script
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: restoring control file
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/0enggc17_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/0enggc17_1_1 tag=TAG20120719T165607
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01
output file name=/oracle1/oraerp/PROD_st/cont_.ctl
Finished restore at 29-JUL-12
contents of Memory Script:
sql clone 'alter database mount standby database';
executing Memory Script
sql statement: alter database mount standby database
contents of Memory Script:
set newname for tempfile 1 to
"/oracle1/oraerp/PROD_st/temp01.dbf";
switch clone tempfile all;
set newname for datafile 1 to
"/oracle1/oraerp/PROD_st/system01.dbf";
set newname for datafile 2 to
"/oracle1/oraerp/PROD_st/sysaux.dbf";
set newname for datafile 3 to
"/oracle1/oraerp/PROD_st/undotbs1.dbf";
set newname for datafile 4 to
"/oracle1/oraerp/PROD_st/users01.dbf";
restore
clone database
executing Memory Script
executing command: SET NEWNAME
renamed tempfile 1 to /oracle1/oraerp/PROD_st/temp01.dbf in control file
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
executing command: SET NEWNAME
Starting restore at 29-JUL-12
using channel ORA_AUX_DISK_1
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00001 to /oracle1/oraerp/PROD_st/system01.dbf
channel ORA_AUX_DISK_1: restoring datafile 00004 to /oracle1/oraerp/PROD_st/users01.dbf
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/09nggc0j_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/09nggc0j_1_1 tag=TAG20120719T165547
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:03
channel ORA_AUX_DISK_1: starting datafile backup set restore
channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set
channel ORA_AUX_DISK_1: restoring datafile 00002 to /oracle1/oraerp/PROD_st/sysaux.dbf
channel ORA_AUX_DISK_1: restoring datafile 00003 to /oracle1/oraerp/PROD_st/undotbs1.dbf
channel ORA_AUX_DISK_1: reading from backup piece /oracle1/oraerp/PROD_st/rman/08nggc0j_1_1
channel ORA_AUX_DISK_1: piece handle=/oracle1/oraerp/PROD_st/rman/08nggc0j_1_1 tag=TAG20120719T165547
channel ORA_AUX_DISK_1: restored backup piece 1
channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:03
Finished restore at 29-JUL-12
contents of Memory Script:
switch clone datafile all;
executing Memory Script
datafile 1 switched to datafile copy
input datafile copy RECID=1 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/system01.dbf
datafile 2 switched to datafile copy
input datafile copy RECID=2 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/sysaux.dbf
datafile 3 switched to datafile copy
input datafile copy RECID=3 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/undotbs1.dbf
datafile 4 switched to datafile copy
input datafile copy RECID=4 STAMP=789926299 file name=/oracle1/oraerp/PROD_st/users01.dbf
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 1 thread 1: '/oracle1/oraerp/PROD_st/redo.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 2 thread 1: '/oracle1/oraerp/PROD_st/redo_2.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 5 thread 0: '/oracle1/oraerp/PROD_st/log5.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
ORACLE error from auxiliary database: ORA-19527: physical standby redo log must be renamed
ORA-00312: online log 6 thread 0: '/oracle1/oraerp/PROD_st/log6.log'
RMAN-05535: WARNING: All redo log files were not defined properly.
Finished Duplicate Db at 29-JUL-12
RMAN>
So please suggest can i rename them all redolog file.
Best Regards, -
Full message that pops up
"The iPod could not be synced because this computer is no longer authorized for purchased items that are on this iPod.
To authorize this computer for items purchased from iTunes Store, choose Store > Authorize This Computer."
I am unable to sync my music, applications, movies, etc. to my iPod touch. The only way I am able to bypass the message that pops out when I try to sync (the one in the title) is by clicking "Apply" instead of "Sync". To do this, I make changes to Apps, Music, or Movies (...) and the buttons "Revert" and "Apply" will replace the button "Sync".
My problem is most likely not due to using many accounts because I only have one and it is the only one that I use. I do not share accounts with my family members. Still, I have tried everything here, nothing has worked for me. Since I don't often listen to Podcasts, I have deleted them from my iPod. I have no idea why I am unable to sync and no one seems to have the same problem as me.
Thank you for your help in advance.
Details
iPod touch, 5th generation
iOS 8.1.2
iTunes 12.0.1.26
Windows 8
Purchases
Pre-ordered album "Froot" purchased from the account that is authorized to my computer
Podcast "Not Too Deep with Grace Helbig" also purchased from the account that is authorized to my computerTry backing up to iTunes and restoring from that backup
-
IPad could not be Synced because it is no longer authorized for purchased items that are on iPad
I recently purchased an IPAD AIR and synced ir with my comuter. 14 days later I try and SYNC it and I get a message " The IPAD could not be synced because this computer is no longe authorized for purchased items that are on this IPAD. The apple id's are the same and only 2 devices authorized. Meessage states to go to STORE and Authorize Computer. When I do I get a Message it is already authorized
The problem appeared to be a Pending Request on the IPAD for the new ICLOUD option to share Keychain. I cleared that up and it appears that fixed the issue. Thanks for your help
-
I want to move voice memos from iPhone to PC (not just sync to itunes)
Hi,
I want to move voice memos from my iPhone to Windows desktop. I saw several posts about syncing them to iTunes. Thats not what i want. I want to copy them to my desktop not just sync to iTunes. Unable to copy - paste from iTunes either.impossible to do anything simple on iTunes, I managed to wipe all my recorded voice memos when I tried to move my files from iphone to desktop, instead they just "sync" I never got the point with sync, why can't you just export files and import files from desktop, simple as that why make it so complicated
-
I'm having trouble updating my iphone 4 since i updated to 4.3.3 i can't update it anymore. initially itunes would let me go so far as downloadin the new software then an error poped up as soon as the download finished, and now when i connect it to my itunes, itunes freezes for about 5 minutes then says something like "could not load sync service, reconnect or try again later" any ideas on what i shud do?
Did you try to connect in recovery mode? iPhone and iPod touch: Unable to restore
-
my iPhone 5 won't sync even i restored. it always appeared "The iPhone could not be synced because the sync session failed to start.
https://discussions.apple.com/thread/3415227?start=0&tstart=0
https://discussions.apple.com/message/16400530#16400530 -
I can't figure out how to transfer my albums on my iphone to photo stream so that I can see them on my apple computer. It did not automatically sync.
kellyfromdanville wrote:
I am new to Apple!
Ah, new to routers too.
Perhaps it's best to have a local computer support person come set you up?
To explain everything would require writing a book here.
But this is what you want basically.
Router, new Wireless N, firmware updated.
1: Two accounts, one admin, one guest Internet access. Random +30 plus character lenght passwords each preferred.
(guest password to max password length of any iDevices)
2: Encryption: WPA2 AES. No Ping. No remote access. No MAC filtering. Visible.
3: Guest access on devices and computers only. Passwords written down and stored.
4: OpenDNS preferred but not mandatory.
If you get OpenDNS, you can log into their website for free and set parental controls on things like inappropriate sites for children. So whatever device is used on your network can't access a large portion of those sites (nothing is perfect) by most users who are not technical oriented.
What your doing now is running the bare bones unsecure router which can be used harmfully against you.
Even a Apple Airport router has to be very well secured. The defautl cd and out of the box setup is not a secure solution. -
My itunes library had been fine. I had been using an older ipod nano to sync with my itunes library and had been doing manual syncs, with the preferences in itunes set for not allowing "ipods or iphones" to sync automatically. I found out that apple had a program to replace the battery on this older ipod nano, so I sent it in. It was great, they didn't have an exact replacement and sent me a later ipod nano. However, this ipod nano is so new - I will have to get a newer computer with a later operating system to use it.
So, I thought I'd use my old iphone to listen to my old playlists. I thought the preferences were set for not automatically syncing iphone to itunes.
I've had problems in the past with the syncs with this iphone and my computer because of the USB port (1.1). I'm thinking this was the problem.
The apple store did something to update the software on my iphone when it wasn't working one day. I think that when I tried to sync the iphone to the g4 cube via the old port (1.1) it basically wiped out everything on my itunes. Whatever was my selected playlist for my iphone - that was the only music
that remained on my computer and the iphone. I only had about 20 songs purchased on my library, but alot of music that had been downloaded, I gave away those original cds. I did have a back up on my external drive, but that thing died a few weeks ago from some random power outtages we had this fall.
I'm not looking to purchase retrieval software or have some outside third party to retrieve it for me. It's not that much music lost. I just wanted confirmation that this is what happened: that my old iphone sync is what erased the music.The old iTunes library was lost with the old PC. However, it all that music and content is still on your iPod there are many ways you can extract this content from the iPod and import it back into iTunes.
Your iPod is designed to sync with only one iTunes library at a time. It will recognize the iTunes library on the new PC as a new library. If you sync the iPod with this new library, all content will be erased from the iPod and replaced with what is in the new library. So what you will want to do is copy everything from the iPod to your new iTunes library on your PC first.
See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
When I open iTunes it is slow to open for one, and two when it does see my iPhone and i go to sync it this is what I get in return... The iPhone "My Name here" could not be synced because the iPhone could not be found on the network. that is a pop up box in middle of screen that says that it does it like every time I go to sync the phone after i do app updates. I am getting very frustrated by this can someone please help. I have made 2 other discussion topics about this and no replies on them. Please if anyone can help I ask for help. This has occurred ever since the iOS 5.1 update and the iTunes 10.6.0 and still continues with the iTunes 10.6.1 update just yesterday and perhaps even worse now. PLEASE HELP IF YOU CAN. I have looked through my network settings etc and everything looks good here on my side.
-
I installed Mountain Lion so that I could sync my notes with my iPhone that already syncs notes with a specific email address I use for school, but during the install it automatically set up Notes to sync w the wrong email addy. It looked in Mail, which had 5 email accounts set up in it, and for some reason picked the only one that I no longer use because it is for a school that I no longer attend. How can I fix it so that it syncs with the correct email account for notes and calendar? There don't seem to be any settings available other than to check if you want to use the basic features. It also said during the set up that it was setting up 'find my mac' but if I look on the iCloud website there is nothing showing there for finding my mac.
At this point I feel like I wasted my money paying for this supposed upgrade. I got nothing for it but frustration. It even automatically set my security settings to allow only downloads from the Mac store so the first time I went to download something I had to stop what I was doing and go correct settings first. I feel like there should be a security setting to block downloads from the Mac store so I don't accidentally end up clicking the wrong thing and being charged.iCloud isn't syncing them on your phone. You simply added the email account to your phone and enabled calendar and notes syncing with the email provider, and the calendar and notes appear in the calendar and notes apps on your phone. You can do this with Gmail, Yahoo and other IMAP account. iCloud email is just another IMAP account, but syncs notes with Apple's iCloud server just as Gmail syncs notes and calendars with Google's server.
iCloud didnt' set up a non-iCloud account on your Mac. When you check Mail in System Preferences>iCloud, it only creates an iCloud email account. You can also add other email accounts to your Mac by going to System Preferences>Mail,Contacts,Calendars and clicking on the "+" sign on the bottom of the left sidebar. If you added these other email accounts to your Mac before you upgraded to Mountain Lion, these were simply maintained on your Mac after you upgraded. -
If you are attempting to update using a Mac or PC with which you do not normally sync
what happens when "If you are attempting to update using a Mac or PC with which you do not normally sync", & they say in step 2 or 3 in order not to loose your stuff "If you are updating your iOS device on a computer with which you do not normally sync , or if you disconnect your device before the sync process is complete, you may notice that some media content that was previously on your device is no longer there. You can restore this content by syncing with the Mac or PC with which you normally sync."
now what if the pc that was originally used to sync my ipod , has corrupt or bad systems files that are causing it from working correctly...? when i plug it in to the o.g. operating sysytems (win xp) it doesnt ever recognize or discover the ipod through itunes. the pc will pop up the "cameras been plugged in, what would you like to do...?" but nothing thru itunes. now if i reboot & run the windows 7 operating system w/itunes that has backed my ipod before & synced a few times as well, but not the o.g. op system used from the beginning (the very initial set up done on the ipod) it works fine, but DOES give me the warning "updating to 5.0 willdelete some of your apps & media, including ... ....will only preserve contacts, calenders," ....etc.
MY HUGE CONCERN IS if i do hit update & go through w/it, & not having been able to sync it to the one normally used to sync my ipod, will that back up i made be able to restore my game seetings, GAME SAVES, & data achievement type information....?
please, i'm very hesitant to go through w/it, so if you can please help me out here & let me know asap.....i canimagine you're all busy busy, so i thank you for your time here w/this
thank you
mike z
[email protected]Not that hard. One the computer you are using do the following:
- Transfer iTunes purchases.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer
- Transfer other music using a third-party program like one of those discussed here.
Copy music
- If you have synced photos you need a paid program like TouchCopy or PhoneView
- When all the media in on the computer, connect the iPod to the computer and make a backup by right clicking on the iPod under Devices in iTunes and select Back Up
- Restore the iPod from that backup.
That computer is now your syncing computer. Note that the iPod backup that iTunes makes does not included synced media like apps or music.
Maybe you are looking for
-
Firefox doesn't close when I'm trying to close it and links fail to complete.
I'm on Windows Vista Home Premium on a Dell Inspiron. When I first log into Firefox, it will come up (slowly), but if I try to go to a linked site, it seems to balk, and looks like it is partially connecting, but the connection doesn't actually take.
-
How to create a new value for template classification??
I want to classify a workflow template, I mean I will not classify my template as a general task. Using TA PFTC_CHG I get a list with all the entries that a customized in my system. My question is how to create a new entry in that list? System is 46C
-
How to syncronize billing document and accounting document numbers?
Hello, In RV60AFZC USEREXIT_NUMBER_RANGE_INV_DATE I changed the number range for the billing document from what is configured for F2. I need for the accounting document number to be the same as the billiing document number. I have created an new exte
-
How do I clear old MobileMe info from iCal?
I had such a bad experience with losing iCal data because of auto synch with the iCal MobileMe that I deleted my iCal Calendar, AddressBook and Mail files from MobileMe. (I still have an account but wonder why I am doing so.) Periodically I get a syn
-
The system ask for keychain password every few minutes
hi, if somebody can help me, please. The system ask me for a keychain password every few minutes, what i need to do?