Start up with no display

I am running a HDX 18 with the product number being NK148AV with windows vista 64 bit. No prior issues to this one.
I have the computer plugged in to the power strip and when I hit the power button it comes on. You hear everything running and see the lit up keyboard but the screen doesn't light up.
No back lighting either its just a black screen.
The actual power button will turn off but the other keys will say lit.
No response from the keyboard and no other sounds like the windows startup sound.
I also plugged it into a TV and used the hotkey to get it to connect but got no display or response.
When I hit the power button it fades on then off and doesn't light back up.
I have tried turning it off and on many a times and done so with and without the battery in. Normally I can fix any issue's with my two PC's but with no screen I can't do anything. Any idea on what I need to do to get it working without having to send it in? I have photos from a recent photoshoot on here I need to get to asap.
Thank you for taking the time to read...
Tiffany~

If you have tried a hard reset and it does not put out to an external monitor you need to start thinking in terms of a dead motherboard, which will likely require professional service unless you want to try to replace it your self.
Link to Your Service Manual
I would try hooking it to a standard vga external monitor if possible but with no startup sounds I think it is not POSTing and the motherboard is likely defective.

Similar Messages

Qosmio X770 starts up with no display.

My Qosmio X770 starts up normally but with no display, I tried connecting it to an external monitor but still nothing.
Sometimes I turn on the computer and the display goes on normally, I restart and it's gone again for another long period of no display. it's kind of random.. I opened it up and I didnt notice anything wrong, I cleaned it up and put it back together, turned it on and it worked.. then a few days later it blacked out again. This has been going on since the first week I bought the laptop a year and a half ago.. I never had the time to take it to the repair shop, as im always on the move, and now the warranty has expired and im looking for an easy fix up, if possible?
When I opened it up I noticed the case was kind of crumbling.. the plastic easily breaks. so I'm wondering if anyone else has these problems.. lousy plastic body and a faulty display.
Any help, suggestions are appreciated.

Intermittent problems are typically the hardest to diagnose. But let me try. Usually you can get an external monitor to show a display by doing an FN-F5 key combination. Hopefully you tried that. A black screen on the LCD can mean a bad LCD screen, bad FL inverter or a loose or bad cable. But if the external monitor doesn't work either then it goes down to the system board being at fault. With everything now being integrated into the system board including the video card, if the video isn't working internally or externally, the only fix is to replace the system board.

Satellite Pro A300-28R - Windows starts up with wrong display resolution

OK so I have a Toshiba Satellite Pro A300-28R with Windows 7 64 bit and an ATI Mobility Radeon 3470 HD graphics card.
I recently connected my laptop to a TV via the S-video connection. This worked fine. The problem is that ever since then every time I start my laptop Windows starts with the S-video display resolution of 600x800.
I have tried changing the settings in both Control Panel and using the ATI CCC, having both selected and applied these settings but each time Windows starts now it boots with the above display resolution.
Following this I have also uninstalled and reinstalled both my display driver and the Toshiba Value Added package but the same problem persists. I have searched with Google about this problem and haven't been able to find anything useful.
Any help would be greatly appreciated.

Hi thanks for your responses! Originally I used the method of closing the laptop screen while connected to the s-video and then opening the screen and logging into Windows. This then automatically detects the display and changes to that output. To get out of this you can do either do the reverse or pres Fn+ F5 to undo. This has worked perfectly for me before with VGA connections. Its only since connecting to s-video that now no matter what, every time the laptop starts up even when it is not connected to any external display, it loads with the resolution 800x600. This is not the first time I have used s-video, but it is the first time I have had this result after doing it.
Interestingly if I change to the appropriate resolution and do a restart. The system restarts and loads to the logon screen and then into Windows in the resolution I specified before the restart but then after fully loading Windows it then changes to 800x600. It is as if the laptop is detecting that there is something connected to the s-video when there is not. I have read a fix for this whereby you can go into the system registry and turn off the feature for automatically detecting displays but I use external displays frequently and this is not a satisfactory solution. This worked perfectly before.

IMac won't start with Thunderbolt Display connected after firmware update

After updating my thunderbolt display firmware to version 1.2 this morning via the App Store, my mid-2014 iMac won't start up with the external display connected. I can get the iMac to start up only by disconnecting the display's thunderbolt connector. After the iMac comes up, I can reconnect the display and everything appears to function normally. I've tried several restarts and the iMac won't start up with the display connected. Anyone else experience this?

Hello rameta,
It may help to reset your Mac's SMC and PRAM.
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/HT3964
Reset your computer’s PRAM
http://support.apple.com/kb/HT1379
Cheers,
Allen

HT1338 When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

When trying to update getting (error surle error domain error-1100). It started yesterday, any help would be great. I have Mountain Lion 10.8.1 on a new macbook pro with retina display.

There are many people suffering from this problem right now (including me). It appears to be a server issue. Just wait and try checking for updates again tomorrow.
Some things I have heard indicate that this may be a regional problem, though what parts of the world are affected I don't know yet. A few people have been helped by deleting the following preference file (paste the path into the Go -> Go to Folder window in the Finder to locate it), though most have not:
~/Library/Preferences/com.apple.SoftwareUpdate.plist
Note that if you are trying to download iTunes 10.7, that can be found here:
http://support.apple.com/kb/DL1576
Also, note that there is no reason to be anxious to get it, as the only thing added in iTunes 10.7 is compatibility with iOS 6, which will not be available until the 19th, and the new iPhone, which will not be available until later as well. The new iTunes that was announced is iTunes 11, which is also not yet available.

My iPhone was working properly n suddenly started vibrating for 5 mins with any display n then it turned off...i charged it overnight but its not turning on??? please help??

my iPhone was working properly n suddenly started vibrating for 5 mins with any display n then it turned off...i charged it overnight but its not turning on??? please help??ip

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Restart / Reset
http://support.apple.com/kb/ht1430
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414
If you try all these steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step...
Be sure to make an appointment first...

My display starts up with a black screen or fades to black after being on.

So just recently when I would turn my mac on, it starts up with just a black screen. The computer is on just no display. Sometimes it will take multiple times of restarting the computer to get the display to come on. When the display is finally on and working fine I found out that if I touch the top of the iMac near the iSight the screen will then slowly fade to black. And of course, the only fix is to restart. Anyone have a similar problem? Unfortunately I didn't purchase the extended warranty and my computer is one month past the 1 year mark. Thank you.

Restart the computer with the Option, Command, P, and R keys held down, and release them when you hear the second startup chime; this clears a setting which causes it to start up into verbose mode each time.
(35613)

I bought a mac book pro 15" with retina display and could not find the user's guide/manual anywhere, except for the wuick start manual. I couldn't even find it in apple's web site. Where is it?

I bought a mac book pro 15" with retina display yesterday and could not find the user's guide/manual anywhere. I couldn't even find it in apple's web site. Where is it?

here it is : http://manuals.info.apple.com/en_US/macbook_pro-13-inch-late-2012-quick_start.pd f
Apples dont come with say, a big manual like old things used to. Basically its a just a quick reference guide, everything on specifics is online
Heres a great book everyone raves about, as far as the OSX and being familiar with it> http://www.amazon.com/gp/product/1449330274/ref=s9_psimh_gw_p14_d1_i1?pf_rd_m=AT VPDKIKX0DER&pf_rd_s=center-2&pf_rd_r=0J2E0HXQBHJK423PADBV&pf_rd_t=101&pf_rd_p=13 89517282&pf_rd_i=507846

MBP with 27" Display performance question

I'm looking for advice regarding improving the performance, if possible, of my Macbook Pro and new 27'' Apple display combination. I'm using a 13" Macbook Pro 2.53Ghz with 4GB RAM, NVIDIA GeForce 9400M graphics card and I have 114GB of the 250GB of HD space available. What I'm really wondering is is this enough spec to run the 27" display easily. Apple says it is… and it does work, but I suspect that I'm working at the limit of what my MCB is capable of. My main applications are Photoshop CS5 with Camera RAW and Bridge. Everything works but I sometimes get lock ups and things are basically a bit jerky. Is the bottle neck my 2.53Ghz processor or the graphics card? I have experimented with the Open GL settings in Photoshop and tried closing all unused applications. Does anyone have any suggestions for tuning things and is there a feasible upgrade for the graphics card if such a thing would make a difference? I have recently started working with 21mb RAW files which I realise isn't helping. Any thoughts would be appreciated.
Matt.

I just added a gorgeous LCD 24" to my MBP setup (the G5 is not Happy) The answer to your question is yes. Just go into Display Preferences and drag the menu bar over to the the 24 this will make the 24 the Primary Display and the MBP the secondary when connected.

User command is not getting triggered in interactive ALV with LIST display

Hi experts,
I have developed an interactive ALV report with LIST display. Here, the issue is, when i double click a record in the primary ALV list, the control must go to the USER COMMAND event which i have written in my report. But the user command event is not getting triggered at all when i double click any record.
It gives the following information instead.
"Choose a valid function".
(My user command name and its respective form name are same.)
Here is my code..
START-OF-SELECTION.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_structure_name         = p_table
      i_callback_user_command = 'TST1'
      i_callback_pf_status_set = 'SET_PF_STATUS'
    TABLES
      t_outtab                 = <dyn_table>
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
IF sy-subrc <> 0.
ENDIF.
FORM tst1 USING r_ucomm LIKE sy-ucomm
                rs_selfield TYPE slis_selfield.
* Local data declaration
DATA: li_tab TYPE REF TO data,
        l_line TYPE REF TO data.
* Local field-symbols
FIELD-SYMBOLS:<l_tab> TYPE table,
                <l_wa> TYPE ANY.
* Create table
CREATE DATA li_tab TYPE STANDARD TABLE OF (p_table).
ASSIGN li_tab->* TO <l_tab>.
* Create workarea
CREATE DATA l_line LIKE LINE OF <l_tab>.
ASSIGN l_line->* TO <l_wa>. CASE r_ucomm.
*   When a record is selected
    WHEN '&IC1'.
*     Read the selected record
      READ TABLE <dyn_table> ASSIGNING <dyn_wa> INDEX
      rs_selfield-tabindex.      IF sy-subrc = 0.
*       Store the record in an internal table
        APPEND <dyn_wa> TO <l_tab>.
*       Fetch the field catalog info
        CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
          EXPORTING
            i_program_name         = 'Z_DEMO_PDF_JG'
            i_structure_name       = p_table
          CHANGING
            ct_fieldcat            = i_fieldcat
          EXCEPTIONS
            inconsistent_interface = 1
            program_error          = 2
            OTHERS                 = 3.
Please advice what is the msitake i have done here..

Read the following code:
pass the i_callback_user_command = g_user_command to the ALV function module and write the FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
as shown below.
thanx
Data for ALV display
DATA : gt_fieldcat TYPE slis_t_fieldcat_alv,
        gt_events           TYPE slis_t_event,
        g_variant LIKE disvariant,
        g_user_command      TYPE slis_formname VALUE 'USER_COMMAND',
        g_status            TYPE slis_formname VALUE 'SET_PF_STATUS',
        gt_list_top_of_page TYPE slis_t_listheader,
        g_repid LIKE sy-repid,
        gf_pos TYPE i
Data for ALV display
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
           EXPORTING
          i_callback_program      = g_repid
             i_callback_program      = sy-repid
             it_fieldcat             = gt_fieldcat[]
       it_events               = gt_events[]
          i_callback_user_command = g_user_command
             i_save                  = 'A'
             is_variant              = g_variant
           TABLES
             t_outtab                = it_print.
FORM user_command USING ucomm    LIKE sy-ucomm
                        selfield TYPE slis_selfield.
CASE ucomm.
    WHEN '&IC1'.
      CASE selfield-sel_tab_field.
        WHEN '1-KUNNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'BPA' FIELD wa_print-kunnr.
            CALL TRANSACTION 'BP'.
          ENDIF.
        WHEN '1-MATNR'.
          READ TABLE it_print INTO wa_print INDEX selfield-tabindex.
          IF sy-subrc = 0.
            SET PARAMETER ID 'JP_ISS' FIELD wa_print-matnr.
            CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN..
           GET PARAMETER ID 'WRK' FIELD wa_zprint-werks.
           SET PARAMETER ID 'VKO' FIELD wa_zprint-vkorg.
           SET PARAMETER ID 'VTW' FIELD wa_zprint-vtweg.
           CALL TRANSACTION 'JP29' AND SKIP FIRST SCREEN.
          ENDIF.
Endcase.
Endform.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

What's the right way to start up with Portal's dev?

Hi to all Portals experts,
I am really struggling to start up learning Portals and more specific their development.Here is the problem - I am a bit new in the NetWeaver but not new in J2EE environment. I went trough all WebDynpro tutorials and really the documentation was written nice.Good hands-on approach with lots of examples and that is what I found with WebDynpro - everything well explained step by step.
But when I started the Portals Tutorials I was a bit disappointed.
1.First of all, there is no explanation which tools one needs to start up with Portal Dev?
I only have SAP Netweaver Development Studio SP15 installed on my PC and I dont have any access to R/3, CRM or other system. Is this enough to at least start to learn Portal Development or not?
2. I realize well that at some point I will need real system to play with but , until than what useful practice I can do on my own and how?
- Even within the WebDynpro tutorial , the very first Part : Define a system - (http://help.sap.com/saphelp_nw04/helpdata/en/cb/f4bc3d42f46c33e10000000a11405a/frameset.htm) -In the portal, navigate to System Administration - System Configuration - System Landscape
Which Portal ? I dont have System Administration on my NWDS SP15?Is is something I should install?unclear?
3. My understanding is that NWDS SP15 contains EP , within its J2EE local engine , but is this EP.6.0, is this enough to develop complete Portal Application A-Z or not - unclear ?
4. PDK. Somewhere I read that Portal Application can be developed with either WebDynpro or with PDK. Ive read about PDK but It is not clear if it is Dev Kit as its name says , should it be downloaded , installed or imported into NWDS, again? And bottom line do I need PDK as a Portal Developer, and at which point?
I only need the starting point for Portal Develop. or some guide that should set milestones 1st ,2nd .. I would prefer the hands-on approach. If some of you has already taken this path and can help me with your directions, links, at least how to get started, I will highly appreciate it! Thanks in advance!Regards, Bob

Hi Bob,
The below reply is as per my experience with Development so far:
1> It is not necessary to have access to R/3 or any other SAP/non SAP application unless you are writing an application in connection to them.
Example: An application which is reading data from R/3 and displaying the same in a table. Yes, in this scenario you would require access to R/3.
2> System Administration is a role just like Home, User Administration, etc in Portal itself.
It contains all the configuration related to System Landscape, Knowledge Menegement, etc
If in case you have not been given this role, you may ask your System Administrator to create the required system (PCD Object). You may then use this system from your Profile (Personalize Portal) link directly.
3> NWDS resides over Portal so you may create your own standalone application or application thats talking to the underlying Portal.
WebDynpro is used to create UI & likewise you may build Web applications or EJB applications.
4> PDK stands for Portal Development Kit. YUou may ask your administrator to download and assign the same to you. This would appear as a "Java Developer" named role in your portal. It contains all APIs required for Java development.
If you do nto have this, you may still use the Javadocs provided on SDN itself.
Depending what custom developmetn you do, depending upon the type the .par (portal archieve), .ear (Enterprise archieve), .war (web archieve) needs to be deployed in portal, so that users may access/view the custom created data.
Hope this helps
All the best!
Warm Regards,
Ritu

On my MacBook Pro with Retina Display, Why does the "USB Devices Disabled Unplug the device using too much power to re-enable USB devices" keep coming up after I unplugged the usb device?

On my MacBook Pro with Retina Display 15", that I purchased a few weeks ago, started coming up with the following message on my desktop:
"USB Devices Disabled Unplug the device using too much power to re-enable USB devices".
I unplugged the device and the message still keeps coming up.
This is what I have done so far to troubleshoot:
I shut down the laptop. When booting up I pressed the command+option+p+r at the same time. It comes up with a menu to reinstall OSX, Get help online, Run Disk Utility, etc. I choose the disk utility and repair the disk and then restarted.
The message keeps popping up and I can't seem to get rid of it. Why does the message keep popping up even though I don't have any devices hooked up to the laptop at all? Any help to reenable my usb ports and get rid of the messaage would be helpful.

I talked to Apple Support and we at least stopped the bleeding, a little bit. These are the troubleshooting steps I did before I contacted Apple Support:
1. Reinstalled OSX
2. Restore the last known good Time Machine Backup.
This did not fix my issue, so I called Apple Support and they told me this:
1. Turn Power off.
2. Wait 15 seconds.
3. Plug in Magsafe adapter.
4. Wait 15 seconds.
5. Hold down the Shift+Option+Power Button for 20-30 seconds.
6. Turn Power back on.
Ok, this stopped the bleeding a little, but as soon as I plugged in a Apple USB Superdrive
and a Apple Mini Displayport to VGA Adapter. This "USB Devices Disabled" pop-up pops up like every 30 minutes now. At least, it is not constantly popping up after I close it, so I guess it will do for the temporary. Going to contact Apple support, later, though to see what else can be done.

I've plugged my ipod classic into my mbp 13 inch with retina display but I can't sync or charge it ?

I recently purchased a macbook pro 13 inch with retina display, am having a great time coming over from Windows! I went to try and sync my ipod today for the first time but unfortunately I cannot charge or sync my ipod when connected. I'm using the standard connector that came with my ipod classic and tried both usb ports on the macbook but have had no luck. I tried looking for the ipod as well on the computer but I can't see it .
I'm pretty sure I've done everything correctly, but am still trying to get used to using my macbook so have probably overlooked something !

HI Matt542, and welcome to the community.
Did you transfer your iTunes library over to the new mac? If not, you should because once the Mac recognizes your iPod it is going to delete the music on it unless you have transferred the old library.
Your iPod can only be synced with one iTunes library at a time. If you try to sync it to a new computer/iTunes library the process will erase what is currently on the iPod and replace it with the content that is now in your new iTunes library. If possible, copy your entire iTunes library from your PC to your Mac first. Here are a few ways to do it.
http://support.apple.com/kb/HT4527
One way to do it is to use your iPod Classic as an external hard drive and copy it that way.
http://support.apple.com/kb/HT1329
Otherwise, you'll need to use one of the methods described in this Apple support document to copy content from your iPod back to your Mac.
https://discussions.apple.com/thread/2452022?start=0&tstart=0

Configure New TM on a New Macbook pro with retina display Issue

I have bought a new New Macbook pro with retina display laptop (Lion moutain OS)and a new TM (2TB).
I have an internet router with wireless connect.
I plugged TM to the router with an ethernet cable.
Connect my TM to my macbook with an ethernet cable.(at this point I still cannot see TM on my Mac)
then I choose Time capsule from WiFi as shown below:
Then the airport utility (version 6.1) opened and start configuring TM but it gives an expected error when it is starting to join the TM!!!!
I have reset the TM several time but with no hope.
PS: I can configure the same TM on a normal laptop with windows 7 installed and Airport utility 5.6
I am struggling on this issue for weeks and I cannot yous TM on my macbook pro.
Help please.

Time Capsule .. TC is the hardware box you bought.. Time Machine is the software you use in the Mac computer.. so what you generally refer to as TM is really TC.. !!
I can configure the same TM on a normal laptop with windows 7 installed and Airport utility 5.6
That is great.. you do not need to setup the Time Capsule at all then. It is already setup.. forget using 6.1 utility.. it is useless toy version.
Just use it.. open Time Machine and see if you can connect to the TC drive to do backup.. and to the wireless.
From your statements..
Connect my TM to my macbook with an ethernet cable.(at this point I still cannot see TM on my Mac)
You are trying to connect with both wireless and ethernet at once.. This can mess things up. choose wireless or ethernet.. not both.
If you keep running into issues.. reset the TC.. I know yet again.
Set it up using SMB names.. for both the TC itself and wireless.
Then lock the wireless channel for 2.4ghz.. use channel 1, 6, or 11 (13 in europe) and see how it goes.

Start up with no display

Similar Messages

Maybe you are looking for