Starting global heartbeat for cluster "d8aed2bb8ab9381d": Failed

When I tries to start the O2cb it can't find the heartbeat region..
The heartbeat regions is on /dev/mapper/360060e8006d044000000d0440000012b, And as you can see it has "Bad magic number in inode",
Soo What can I do about that? Can I clear this disk and create a new one? Any suggestions?
# /etc/init.d/o2cb start
Setting cluster stack "o2cb": OK
Registering O2CB cluster "d8aed2bb8ab9381d": OK
Setting O2CB cluster timeouts : OK
Starting global heartbeat for cluster "d8aed2bb8ab9381d": Failed
o2cb: Heartbeat region could not be found 0004FB000005000018DD9ACEA2B4B918
Stopping global heartbeat on cluster "d8aed2bb8ab9381d": OK
[root@u139gw poolfsmnt]# mounted.ocfs2 -f
Device Stack Cluster F Nodes
/dev/sdb o2cb d8aed2bb8ab9381d G Unknown: Bad magic number in inode
/dev/sdc o2cb d8aed2bb8ab9381d G u139gw
/dev/sdd o2cb d8aed2bb8ab9381d G Unknown: Bad magic number in inode
/dev/sde o2cb d8aed2bb8ab9381d G u139gw
/dev/sdg o2cb d8aed2bb8ab9381d G u139gw
/dev/mapper/360060e8006d044000000d0440000012b o2cb d8aed2bb8ab9381d G Unknown: Bad magic number in inode
/dev/mapper/360060e8006d044000000d0440000008a o2cb d8aed2bb8ab9381d G u139gw
/dev/mapper/360060e8016503600000150360000000d o2cb d8aed2bb8ab9381d G u139gw
/dev/sdf o2cb d8aed2bb8ab9381d G u139gw

Magnus wrote:
The heartbeat regions is on /dev/mapper/360060e8006d044000000d0440000012b, And as you can see it has "Bad magic number in inode",
Soo What can I do about that? Can I clear this disk and create a new one? Any suggestions?Open an SR with Oracle Support. You could try dismounting that disk on all servers and running fsck.ocfs2 to see if it fixes the inode issue for you as well.

Similar Messages

Start Data Selection for Header Tabels fail

Hi!
The above mentioned activity fails because tabels COEP and COBK are vergy large and it seems that I run into a time out.
I found the note:
1166229 - Customizing the select statement within Fill Header Reports
I' am not a CO spezialist and I don't know which field I could take to add additional selection criterias on this tabels.
As much as I understand this tabel save CO data and since I transfer with TDMS just the last 2 month of our production system, my idea is to select e.g. just year 2009 for COEP and COBK.
Any hint or proposals??
BR
Werner

Hi,
1. Check if all the recommendations as per note 890797 are followed.
2. If yes, run the troubleshooter for the activity.
3. Here, under "Change Technical Settings for Conversion Objects", change the size category for the table to Large.
4. Go back to the Troubleshooter screen and run "Troubleshooter for Conversion Objects" -> "Automatic Repair"
5. Restart Data Selection
Hope this resolves the issue.
Regards,
Suman

Ohasd failed to start Inappropriate ioctl for device at roothas.pl

Hallo!I am trying to install Oracle database 11.2.0.1 on Oracle Linux 6.0 32 bit deployed on VirtualBox.I am setting up a single-instance database on ASM thus doing
Grid installation on a stand-alone server.I launched the Grid installer OUI and when I run the root script
/u01/app/oracle/product/11.2.0/grid/root.sh
I get the following error
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/oracle/product/11.2.0/grid/crs/install/roothas.pl line 296.
When I check the /u01/app/oracle/product/11.2.0/grid/log/joey-oel6/client/crsctl.log it gives me the following error messages
Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.
2012-06-28 14:47:26.259: [ CSSCLNT][3037951696]clssscConnect: gipc request failed with 29 (0x13)
2012-06-28 14:47:26.259: [ CSSCLNT][3037951696]clsssInitNative: connect failed, rc 29
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 0
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 1
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 2
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 3
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 4
2012-06-28 14:47:26.272: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 5
2012-06-28 14:47:26.273: [ OCRRAW][3037951696]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 0
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 1
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 2
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 3
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 4
2012-06-28 14:47:26.273: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 5
2012-06-28 14:47:26.274: [ OCRRAW][3037951696]ibctx: Failed to read the whole bootblock. Assumes invalid format.
2012-06-28 14:47:26.274: [ OCRRAW][3037951696]proprinit:problem reading the bootblock or superbloc 22
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 0
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 1
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 2
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 3
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 4
2012-06-28 14:47:26.274: [ OCROSD][3037951696]utread:3: Problem reading buffer 9586000 buflen 4096 retval 0 phy_offset 102400 retry 5
2012-06-28 14:47:26.274: [ OCRRAW][3037951696]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
2012-06-28 14:47:26.698: [ OCRRAW][3037951696]iniconfig:No 92 configuration
2012-06-28 14:47:26.698: [ OCRAPI][3037951696]a_init:6a: Backend init successful
2012-06-28 14:47:26.698: [ CRSCTL][3037951696]crsctlcss_GetEnvVar: Environment variable NLS_LANG not found
2012-06-28 14:47:26.699: [ CRSCTL][3037951696]crsctlcss_GetEnvVar: Error 21101 in getting environment variable ORACLE_HOME
2012-06-28 14:47:26.700: [ CRSCTL][3037951696]crsctlcss_doclusterkeys: the current number of pinned nodes 0, set is 1
2012-06-28 14:47:27.233: [ CRSCTL][3037951696]crsctl_pin_ocr: set OCR keys succ.
How do I solve this?

Hello,
Problem is indeed because of upstart/init incompatibility. Here is the working way:
1) Proceed with the installation as usual until root.sh invocation.
2) Before root.sh edit $GRID_HOME/crs/install/s_crsconfig_lib.pm, go to line 1173 (you should find a code like: if ($srv eq "ohasd") { # Start OHASD).
3) Insert a following snippet before starting OHASD part (line 1173)
my $UPSTART_OHASD_SERVICE = "oracle-ohasd";
my $INITCTL = "/sbin/initctl";
($status, @output) = system_cmd_capture ("$INITCTL start $UPSTART_OHASD_SERVICE");
if (0 != $status)
error ("Failed to start $UPSTART_OHASD_SERVICE, error: $!");
return $FAILED;
4) Create a file /etc/init/oracle-ohasd.conf with the following content inside
# Oracle OHASD startup
start on runlevel [35]
stop on runlevel [!35]
respawn
exec /etc/init.d/init.ohasd run >/dev/null 2>&1 </dev/null
5) Invoke root.sh
6) Finish the installation.
If you previously ran root.sh (not successfully), simply roll it back:
$GRID_HOME/crs/install/roothas.pl -deconfig -force -verbose
Make changes above and continue.
good luck
Anand

Ohasd failed to start: Inappropriate ioctl for device, CRS-4124:, CRS-4000:

New install on amazon, 11.2.0-64 image. Did NOT install canned 11.2.0 on the host, just downloaded the grid component and running the installer to configure Grid Infrastructure for a Stand-Alone Server.
Fails with the following error where I do Stand Alone Server or Grid Software only;
$ /u01/app/grid/1120/grid/perl/bin/perl -I/u01/app/grid/1120/grid/perl/lib -I/u01/app/grid/1120/grid/crs/install /u01/app/grid/1120/grid/crs/install/roothas.pl -verbose
2010-04-25 16:46:00: Checking for super user privileges
2010-04-25 16:46:00: User has super user privileges
2010-04-25 16:46:00: Parsing the host name
Using configuration parameter file: /u01/app/grid/1120/grid/crs/install/crsconfig_params
LOCAL ADD MODE
Creating OCR keys for user 'grid', privgrp 'oinstall'..
Operation successful.
CRS-4664: Node domu-12-31-36-00-35-b2 successfully pinned.
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start: Inappropriate ioctl for device at /u01/app/grid/1120/grid/crs/install/roothas.pl line 296.
root@domU-12-31-36-00-35-B2:[u01/app/grid/1120/grid/install/utl]
Been through the related noted to no avail;
Doc ID 1063552.1 ----> rm -rf /tmp/.oracle /usr/tmp/.oracle /var/tmp/.oracle
Doc ID 969878.1 ----> service syslog restart
And ipV6 is NOT in configured in the hosts file.
Any ideas / solutions?
TIA,
Neil
and restarted

Hi,
Ran into this myself and then found your note. After much investigating it turns out that the Linux run level on my AMI's is set to 4 (even though the inittab has it set to 3) and the CRS init script init.ohasd expects 3 and 5. Because of that problem, the "init" process was not able to launch the init.ohasd script.
For now the workaound for this problem is to run the system at run levels 3 or 5 before executing the root script. However, I am still trying to figure out why my AMI's are running at 4.
I am curious, if you do read this, did you get this error during the install and ignore it?
Run Level
This is a prerequisite condition to test whether the system is running with proper run level. (more details)
Expected Value
: 3,5
Actual Value
: 4
I did and of course it didn't work. Also, what Amazon AMI did you use?
Thanks,
Larry

Job for httpd.service failed. See 'systemctl status httpd.service' and

Hello,
I am the problem. I change "/etc/httpd/conf/httpd.conf" to install php5 on apache.
sudo systemctl start httpd
Job for httpd.service failed. See 'systemctl status httpd.service' and 'journalctl -xn' for details.
systemctl status httpd.service
● httpd.service - Apache Web Server
Loaded: loaded (/usr/lib/systemd/system/httpd.service; enabled)
Active: failed (Result: exit-code) since lun. 2014-08-25 12:19:31 CEST; 1min 18s ago
Process: 2208 ExecStop=/usr/bin/apachectl graceful-stop (code=exited, status=1/FAILURE)
Process: 2433 ExecStart=/usr/bin/apachectl start (code=exited, status=1/FAILURE)
Main PID: 2060 (code=exited, status=0/SUCCESS)
août 25 12:19:31 creaprog apachectl[2433]: httpd: Syntax error on line 66 o...y
août 25 12:19:31 creaprog systemd[1]: httpd.service: control process exite...=1
août 25 12:19:31 creaprog systemd[1]: Failed to start Apache Web Server.
août 25 12:19:31 creaprog systemd[1]: Unit httpd.service entered failed state.
Hint: Some lines were ellipsized, use -l to show in full.
cat /etc/httpd/conf/httpd.conf
# This is the main Apache HTTP server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://httpd.apache.org/docs/2.4/> for detailed information.
# In particular, see
# <URL:http://httpd.apache.org/docs/2.4/mod/directives.html>
# for a discussion of each configuration directive.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do *not* begin
# with "/", the value of ServerRoot is prepended -- so "logs/access_log"
# with ServerRoot set to "/usr/local/apache2" will be interpreted by the
# server as "/usr/local/apache2/logs/access_log", whereas "/logs/access_log"
# will be interpreted as '/logs/access_log'.
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do not add a slash at the end of the directory path. If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used. If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
ServerRoot "/srv/http"
# Mutex: Allows you to set the mutex mechanism and mutex file directory
# for individual mutexes, or change the global defaults
# Uncomment and change the directory if mutexes are file-based and the default
# mutex file directory is not on a local disk or is not appropriate for some
# other reason.
# Mutex default:/run/httpd
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
# Change this to Listen on specific IP addresses as shown below to
# prevent Apache from glomming onto all bound IP addresses.
#Listen 12.34.56.78:80
Listen 80
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
# Example:
# LoadModule foo_module modules/mod_foo.so
LoadModule authn_file_module modules/mod_authn_file.so
#LoadModule authn_dbm_module modules/mod_authn_dbm.so
#LoadModule authn_anon_module modules/mod_authn_anon.so
#LoadModule authn_dbd_module modules/mod_authn_dbd.so
#LoadModule authn_socache_module modules/mod_authn_socache.so
LoadModule authn_core_module modules/mod_authn_core.so
LoadModule authz_host_module modules/mod_authz_host.so
LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
LoadModule authz_user_module modules/mod_authz_user.so
#LoadModule authz_dbm_module modules/mod_authz_dbm.so
#LoadModule authz_owner_module modules/mod_authz_owner.so
#LoadModule authz_dbd_module modules/mod_authz_dbd.so
LoadModule authz_core_module modules/mod_authz_core.so
#LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
LoadModule access_compat_module modules/mod_access_compat.so
LoadModule auth_basic_module modules/mod_auth_basic.so
#LoadModule auth_form_module modules/mod_auth_form.so
#LoadModule auth_digest_module modules/mod_auth_digest.so
#LoadModule allowmethods_module modules/mod_allowmethods.so
#LoadModule file_cache_module modules/mod_file_cache.so
#LoadModule cache_module modules/mod_cache.so
#LoadModule cache_disk_module modules/mod_cache_disk.so
#LoadModule cache_socache_module modules/mod_cache_socache.so
#LoadModule socache_shmcb_module modules/mod_socache_shmcb.so
#LoadModule socache_dbm_module modules/mod_socache_dbm.so
#LoadModule socache_memcache_module modules/mod_socache_memcache.so
#LoadModule watchdog_module modules/mod_watchdog.so
#LoadModule macro_module modules/mod_macro.so
#LoadModule dbd_module modules/mod_dbd.so
#LoadModule dumpio_module modules/mod_dumpio.so
#LoadModule echo_module modules/mod_echo.so
#LoadModule buffer_module modules/mod_buffer.so
#LoadModule data_module modules/mod_data.so
#LoadModule ratelimit_module modules/mod_ratelimit.so
LoadModule reqtimeout_module modules/mod_reqtimeout.so
#LoadModule ext_filter_module modules/mod_ext_filter.so
#LoadModule request_module modules/mod_request.so
LoadModule include_module modules/mod_include.so
LoadModule filter_module modules/mod_filter.so
#LoadModule reflector_module modules/mod_reflector.so
#LoadModule substitute_module modules/mod_substitute.so
#LoadModule sed_module modules/mod_sed.so
#LoadModule charset_lite_module modules/mod_charset_lite.so
#LoadModule deflate_module modules/mod_deflate.so
#LoadModule xml2enc_module modules/mod_xml2enc.so
#LoadModule proxy_html_module modules/mod_proxy_html.so
LoadModule mime_module modules/mod_mime.so
#LoadModule ldap_module modules/mod_ldap.so
LoadModule log_config_module modules/mod_log_config.so
#LoadModule log_debug_module modules/mod_log_debug.so
#LoadModule log_forensic_module modules/mod_log_forensic.so
#LoadModule logio_module modules/mod_logio.so
#LoadModule lua_module modules/mod_lua.so
LoadModule env_module modules/mod_env.so
#LoadModule mime_magic_module modules/mod_mime_magic.so
#LoadModule cern_meta_module modules/mod_cern_meta.so
#LoadModule expires_module modules/mod_expires.so
LoadModule headers_module modules/mod_headers.so
#LoadModule ident_module modules/mod_ident.so
#LoadModule usertrack_module modules/mod_usertrack.so
#LoadModule unique_id_module modules/mod_unique_id.so
LoadModule setenvif_module modules/mod_setenvif.so
LoadModule version_module modules/mod_version.so
#LoadModule remoteip_module modules/mod_remoteip.so
LoadModule proxy_module modules/mod_proxy.so
LoadModule proxy_connect_module modules/mod_proxy_connect.so
LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
LoadModule proxy_http_module modules/mod_proxy_http.so
LoadModule proxy_fcgi_module modules/mod_proxy_fcgi.so
LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
#LoadModule proxy_fdpass_module modules/mod_proxy_fdpass.so
LoadModule proxy_wstunnel_module modules/mod_proxy_wstunnel.so
LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
LoadModule proxy_express_module modules/mod_proxy_express.so
#LoadModule session_module modules/mod_session.so
#LoadModule session_cookie_module modules/mod_session_cookie.so
#LoadModule session_crypto_module modules/mod_session_crypto.so
#LoadModule session_dbd_module modules/mod_session_dbd.so
LoadModule slotmem_shm_module modules/mod_slotmem_shm.so
#LoadModule slotmem_plain_module modules/mod_slotmem_plain.so
#LoadModule ssl_module modules/mod_ssl.so
#LoadModule dialup_module modules/mod_dialup.so
LoadModule lbmethod_byrequests_module modules/mod_lbmethod_byrequests.so
LoadModule lbmethod_bytraffic_module modules/mod_lbmethod_bytraffic.so
LoadModule lbmethod_bybusyness_module modules/mod_lbmethod_bybusyness.so
LoadModule lbmethod_heartbeat_module modules/mod_lbmethod_heartbeat.so
LoadModule mpm_event_module modules/mod_mpm_event.so
LoadModule unixd_module modules/mod_unixd.so
#LoadModule heartbeat_module modules/mod_heartbeat.so
#LoadModule heartmonitor_module modules/mod_heartmonitor.so
#LoadModule dav_module modules/mod_dav.so
LoadModule status_module modules/mod_status.so
LoadModule autoindex_module modules/mod_autoindex.so
#LoadModule asis_module modules/mod_asis.so
#LoadModule info_module modules/mod_info.so
#LoadModule suexec_module modules/mod_suexec.so
#LoadModule cgid_module modules/mod_cgid.so
#LoadModule cgi_module modules/mod_cgi.so
#LoadModule dav_fs_module modules/mod_dav_fs.so
#LoadModule dav_lock_module modules/mod_dav_lock.so
#LoadModule vhost_alias_module modules/mod_vhost_alias.so
LoadModule negotiation_module modules/mod_negotiation.so
LoadModule dir_module modules/mod_dir.so
#LoadModule imagemap_module modules/mod_imagemap.so
#LoadModule actions_module modules/mod_actions.so
#LoadModule speling_module modules/mod_speling.so
LoadModule userdir_module modules/mod_userdir.so
LoadModule alias_module modules/mod_alias.so
#LoadModule rewrite_module modules/mod_rewrite.so
#Load php5 module
LoadModule php5_module modules/libphp5.so
<IfModule unixd_module>
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
User http
Group http
</IfModule>
# 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents. e.g. [email protected]
ServerAdmin [email protected]
# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
# If your host doesn't have a registered DNS name, enter its IP address here.
#ServerName www.example.com:80
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other
# <Directory> blocks below.
<Directory />
AllowOverride none
Require all denied
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "/srv/http"
<Directory "/srv/http">
# Possible values for the Options directive are "None", "All",
# or any combination of:
# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
# Note that "MultiViews" must be named *explicitly* --- "Options All"
# doesn't give it to you.
# The Options directive is both complicated and important. Please see
# http://httpd.apache.org/docs/2.4/mod/core.html#options
# for more information.
Options Indexes FollowSymLinks
# AllowOverride controls what directives may be placed in .htaccess files.
# It can be "All", "None", or any combination of the keywords:
# AllowOverride FileInfo AuthConfig Limit
AllowOverride None
# Controls who can get stuff from this server.
Require all granted
</Directory>
# DirectoryIndex: sets the file that Apache will serve if a directory
# is requested.
<IfModule dir_module>
DirectoryIndex index.html
</IfModule>
# The following lines prevent .htaccess and .htpasswd files from being
# viewed by Web clients.
<Files ".ht*">
Require all denied
</Files>
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "/var/log/httpd/error_log"
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
<IfModule log_config_module>
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
<IfModule logio_module>
# You need to enable mod_logio.c to use %I and %O
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
</IfModule>
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you *do*
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and *not* in this file.
CustomLog "/var/log/httpd/access_log" common
# If you prefer a logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog "/var/log/httpd/access_log" combined
</IfModule>
<IfModule alias_module>
# Redirect: Allows you to tell clients about documents that used to
# exist in your server's namespace, but do not anymore. The client
# will make a new request for the document at its new location.
# Example:
# Redirect permanent /foo http://www.example.com/bar
# Alias: Maps web paths into filesystem paths and is used to
# access content that does not live under the DocumentRoot.
# Example:
# Alias /webpath /full/filesystem/path
# If you include a trailing / on /webpath then the server will
# require it to be present in the URL. You will also likely
# need to provide a <Directory> section to allow access to
# the filesystem path.
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the target directory are treated as applications and
# run by the server when requested rather than as documents sent to the
# client. The same rules about trailing "/" apply to ScriptAlias
# directives as to Alias.
ScriptAlias /cgi-bin/ "/srv/http/cgi-bin/"
</IfModule>
<IfModule cgid_module>
# ScriptSock: On threaded servers, designate the path to the UNIX
# socket used to communicate with the CGI daemon of mod_cgid.
#Scriptsock cgisock
</IfModule>
# "/srv/http/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "/srv/http/cgi-bin">
AllowOverride None
Options None
Require all granted
</Directory>
<IfModule mime_module>
# TypesConfig points to the file containing the list of mappings from
# filename extension to MIME-type.
TypesConfig conf/mime.types
# AddType allows you to add to or override the MIME configuration
# file specified in TypesConfig for specific file types.
#AddType application/x-gzip .tgz
# AddEncoding allows you to have certain browsers uncompress
# information on the fly. Note: Not all browsers support this.
#AddEncoding x-compress .Z
#AddEncoding x-gzip .gz .tgz
# If the AddEncoding directives above are commented-out, then you
# probably should define those extensions to indicate media types:
AddType application/x-compress .Z
AddType application/x-gzip .gz .tgz
# AddHandler allows you to map certain file extensions to "handlers":
# actions unrelated to filetype. These can be either built into the server
# or added with the Action directive (see below)
# To use CGI scripts outside of ScriptAliased directories:
# (You will also need to add "ExecCGI" to the "Options" directive.)
#AddHandler cgi-script .cgi
# For type maps (negotiated resources):
#AddHandler type-map var
# Filters allow you to process content before it is sent to the client.
# To parse .shtml files for server-side includes (SSI):
# (You will also need to add "Includes" to the "Options" directive.)
#AddType text/html .shtml
#AddOutputFilter INCLUDES .shtml
</IfModule>
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
#MIMEMagicFile conf/magic
# Customizable error responses come in three flavors:
# 1) plain text 2) local redirects 3) external redirects
# Some examples:
#ErrorDocument 500 "The server made a boo boo."
#ErrorDocument 404 /missing.html
#ErrorDocument 404 "/cgi-bin/missing_handler.pl"
#ErrorDocument 402 http://www.example.com/subscription_info.html
# MaxRanges: Maximum number of Ranges in a request before
# returning the entire resource, or one of the special
# values 'default', 'none' or 'unlimited'.
# Default setting is to accept 200 Ranges.
#MaxRanges unlimited
# EnableMMAP and EnableSendfile: On systems that support it,
# memory-mapping or the sendfile syscall may be used to deliver
# files. This usually improves server performance, but must
# be turned off when serving from networked-mounted
# filesystems or if support for these functions is otherwise
# broken on your system.
# Defaults: EnableMMAP On, EnableSendfile Off
#EnableMMAP off
#EnableSendfile on
# Supplemental configuration
# The configuration files in the conf/extra/ directory can be
# included to add extra features or to modify the default configuration of
# the server, or you may simply copy their contents here and change as
# necessary.
# Server-pool management (MPM specific)
Include conf/extra/httpd-mpm.conf
# Multi-language error messages
Include conf/extra/httpd-multilang-errordoc.conf
# Fancy directory listings
Include conf/extra/httpd-autoindex.conf
# Language settings
Include conf/extra/httpd-languages.conf
# User home directories
Include conf/extra/httpd-userdir.conf
# Real-time info on requests and configuration
#Include conf/extra/httpd-info.conf
# Virtual hosts
#Include conf/extra/httpd-vhosts.conf
# Local access to the Apache HTTP Server Manual
#Include conf/extra/httpd-manual.conf
# Distributed authoring and versioning (WebDAV)
#Include conf/extra/httpd-dav.conf
# Various default settings
Include conf/extra/httpd-default.conf
# PHP settings
Include conf/extra/php5_module.conf
# Configure mod_proxy_html to understand HTML4/XHTML1
<IfModule proxy_html_module>
Include conf/extra/proxy-html.conf
</IfModule>
# Secure (SSL/TLS) connections
#Include conf/extra/httpd-ssl.conf
# Note: The following must must be present to support
# starting without SSL on platforms with no /dev/random equivalent
# but a statically compiled-in mod_ssl.
<IfModule ssl_module>
SSLRandomSeed startup builtin
SSLRandomSeed connect builtin
</IfModule>
# uncomment out the below to deal with user agents that deliberately
# violate open standards by misusing DNT (DNT *must* be a specific
# end-user choice)
#<IfModule setenvif_module>
#BrowserMatch "MSIE 10.0;" bad_DNT
#</IfModule>
#<IfModule headers_module>
#RequestHeader unset DNT env=bad_DNT
#</IfModule>
Thanks, sorry my english is bad .
Last edited by Creaprog (2014-08-25 10:25:17)

I just noticed the exact same thing. It turns out that the httpd-ssl.conf file on my system is still the old v2.2 syntax, which means that the SSLMutex directive is still in there. This is an invalid directive after 2.2.
This is where things get interesting. At first, I simply thought I had forgotten to merge httpd-ssl.conf.pacnew after apache had been upgraded to 2.4. However, when I check my pacman.log, it appears that httpd-ssl.conf was never upgraded when apache went to 2.4 - (2.2.26-1 -> 2.4.7-1). There was never a pacnew file generated to be merged.
I took a look at the apache package via the abs and the "proper" httpd-ssl.conf is certainly in there, so why pacman never created a pacnew file is a mystery.
Anyway, to fix this: pull the httpd-ssl.conf from the apache package, either from your cache, using the abs and building it, or (I think) pacman may re-install it if you move the file to a backup location (not sure about this). Then merge your original httpd-ssl-conf with the new one.

Oracle Linux 6.2 with RAC 11g cluster install fails on root.sh ioctl

I have 2 HP Servers I'm trying to install a cluster to.
I've tried Oracle Linux 6.2 and 6.3 with the same error on both nodes when running the root.sh script.
I have tried the permissions, run-levels, etc that I have found in the forum and nothing has worked except the deconfigure works great. /u01/app/11.2.0/grid/crs/install/rootcrs.pl -deconfig -force
root.sh Errors:
Adding daemon to inittab
CRS-4124: Oracle High Availability Services startup failed.
CRS-4000: Command Start failed, or completed with errors.
ohasd failed to start: Inappropriate ioctl for device
ohasd failed to start at /u01/app/11.2.0/grid/crs/install/rootcrs.pl line 443.
I can't see whats wrong, I did use ASM to configure iSCSI disks from a storage device which appeared to work correctly:
# oracleasm listdisks
VOL1
VOL2
VOL3
VOL5
# ls /dev/oracleasm/disks/
VOL1 VOL2 VOL3 VOL5
When I created the disks with ASM I used multipath successfuly:
# oracleasm createdisk VOL1 /dev/mapper/23535333762373932
The other node can see the disks just fine with oracleasm listdisks
I chose 3 disks for the OCR - VOL1-3
There was one forum work around to edit the $GRID_HOME/crs/install/s_crsconfig_lib.pm which I did no Oracle Linux 6.3 to no avail. I also tried using NFS mounted volumes for the OCR drives but got the same error.
Using the install: linux.x64_11gR2_grid

oracleasm (aka asmlib) may not be supported on RHEL(OEL) 6.x. You do NOT need asmlib and it's days are numbered.
upon review of this document, even though it was for 10g, it still appears to be relevant
"10g: Using Openfiler iSCSI with an Oracle RAC database on Linux [ID 371434.1]"
and
udev utility can be used for disk mounting consistency between the nodes. It is the preferred tool. Note:371814.1 explains how to use the udev option.
and
Can't install GI 11gr2 (11.2.0.3) root.sh fail
Edited by: onedbguru on Dec 13, 2012 3:40 PM

Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid.

I'm stuck here trying to figure this error out.
2003 domain, 2012 hyper v core 3 nodes. (I have two of these hyper V groups, hvclust2012 is the problem group, hvclust2008 is okay)
In Failover Cluster Manager I see these errors, "Cluster network name resource 'Cluster Name' failed registration of one or more associated DNS name(s) for the following reason: The handle is invalid."
I restarted the host node that was listed in having the error then another node starts showing the errors.
I tried to follow this site: http://blog.subvertallmedia.com/2012/12/06/repairing-a-failover-cluster-in-windows-server-2012-live-migration-fails-dns-cluster-name-errors/
Then this error shows up when doing the repair: there was an error repairing the active directory object for 'Cluster Name'
I looked at our domain controller and noticed I don't have access to local users and groups. I can access our other hvclust2008 (both clusters are same version 2012).
<image here>
I came upon this thread: http://social.technet.microsoft.com/Forums/en-US/85fc2ad5-b0c0-41f0-900e-df1db8625445/windows-2012-cluster-resource-name-fails-dns-registration-evt-1196?forum=winserverClustering
Now, I'm stuck on adding a managed service account (mas). I'm not sure if I'm way off track to fix this. Any advice? Thanks in advance!
<image here>

Thanks Elton,
I restarted 3 hosts after applying the hotfix. Then I did the steps below and got stuck on step 5. That is when I get the error (image above). There
was an error repairing the active directory object for 'Cluster Name'. For more data, see 'Information Details'.
To reset the password on the affected name resource, perform the following steps:
From Failover Cluster Manager, locate the name resource.
Right-click on the resource, and click Properties.
On the Policies tab, select If resource fails, do not restart, and then click OK.
Right-click on the resource, click More Actions, and then click Simulate Failure.
When the name resource shows "Failed," right-click on the resource, click More Actions, and then click Repair.
After the name resource is online, right-click on the resource, and then click Properties.
On the Policies tab, select If resource fails, attempt restart on current node, and then click OK.
Thanks

Starting cluster ocfs2: Failed,Checking cluster ocfs2 is offline

Checking cluster ocfs2 is offline. And when I online the ocfs2 ,display the following error message,who can tell me what's wrong with the ocfs2? thanks!!!!
# /etc/init.d/o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Offline
# /etc/init.d/o2cb force-reload
Unmounting ocfs2_dlmfs filesystem: OK
Unloading module "ocfs2_dlmfs": OK
Unmounting configfs filesystem: OK
Unloading module "configfs": OK
Loading module "configfs": OK
Mounting configfs filesystem at /config: OK
Loading module "ocfs2_nodemanager": OK
Loading module "ocfs2_dlm": OK
Loading module "ocfs2_dlmfs": OK
Mounting ocfs2_dlmfs filesystem at /dlm: OK
Starting cluster ocfs2: Failed
Cluster ocfs2 created
o2cb_ctl: Configuration error discovered while populating cluster ocfs2. None of its nodes were considered local. A node is considered local when its node name in the configuration maches this machine's host name.
Stopping cluster ocfs2: OK
# /etc/init.d/o2cb online ocfs2
Starting cluster ocfs2: Failed
Cluster ocfs2 created
o2cb_ctl: Configuration error discovered while populating cluster ocfs2. None of its nodes were considered local. A node is considered local when its node name in the configuration maches this machine's host name.
Stopping cluster ocfs2: OK
ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted"
: Could not mount /dev/sdb1
o2cb_ctl: Unable to access cluster service while creating node

http://unirac.in/qtoa/122/o2cb_ctl-unable-access-cluster-service-while-creating-node
TODO:
- Quit ocfs2console
- Stop the service
- Remove file /etc/ocfs2/cluster.conf
- Restart ocfs2console
- Configure the nodes again
[root@rac1 ~]# /etc/init.d/ocfs2 stop
Stopping Oracle Cluster File System (OCFS2) [ OK ]
[root@rac1 ~]# /etc/init.d/o2cb offline ocfs2
[root@rac1 ~]# /etc/init.d/o2cb unload
Unmounting ocfs2_dlmfs filesystem: OK
Unloading module "ocfs2_dlmfs": OK
Unmounting configfs filesystem: OK
Unloading module "configfs": OK
[root@rac1 ~]# rm -f /etc/ocfs2/cluster.conf
[root@rac1 ~]# /usr/sbin/ocfs2console &

Checking cluster ocfs2 is offline,Starting cluster ocfs2: Failed

Checking cluster ocfs2 is offline. And when I online the ocfs2 ,display the following error message,who can tell me what's wrong with the ocfs2? thanks!!!!
# /etc/init.d/o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Offline
# /etc/init.d/o2cb force-reload
Unmounting ocfs2_dlmfs filesystem: OK
Unloading module "ocfs2_dlmfs": OK
Unmounting configfs filesystem: OK
Unloading module "configfs": OK
Loading module "configfs": OK
Mounting configfs filesystem at /config: OK
Loading module "ocfs2_nodemanager": OK
Loading module "ocfs2_dlm": OK
Loading module "ocfs2_dlmfs": OK
Mounting ocfs2_dlmfs filesystem at /dlm: OK
Starting cluster ocfs2: Failed
Cluster ocfs2 created
o2cb_ctl: Configuration error discovered while populating cluster ocfs2. None of its nodes were considered local. A node is considered local when its node name in the configuration maches this machine's host name.
Stopping cluster ocfs2: OK
# /etc/init.d/o2cb online ocfs2
Starting cluster ocfs2: Failed
Cluster ocfs2 created
o2cb_ctl: Configuration error discovered while populating cluster ocfs2. None of its nodes were considered local. A node is considered local when its node name in the configuration maches this machine's host name.
Stopping cluster ocfs2: OK
ocfs2_hb_ctl: Unable to access cluster service while starting heartbeat
mount.ocfs2: Error when attempting to run /sbin/ocfs2_hb_ctl: "Operation not permitted"
: Could not mount /dev/sdb1
o2cb_ctl: Unable to access cluster service while creating node

Hi
Getting exactly the same errors when trying to implement OCFS2 on a VMWARE solution
[root@raclinux1 init.d]# ./o2cb status
Module "configfs": Loaded
Filesystem "configfs": Mounted
Module "ocfs2_nodemanager": Loaded
Module "ocfs2_dlm": Loaded
Module "ocfs2_dlmfs": Loaded
Filesystem "ocfs2_dlmfs": Mounted
Checking cluster ocfs2: Offline
[root@raclinux1 init.d]# ./o2cb online ocfs2
Starting cluster ocfs2: Failed
Cluster ocfs2 created
o2cb_ctl: Configuration error discovered while populating cluster ocfs2. None of its nodes were considered local. A node is considered local when its node name in the configuration maches this machine's host name.
Stopping cluster ocfs2: OK
And from ocfs2console we get the following errors when trying to add our node to the configuration
o2cb_ctl: Unable to access cluster service while creating node
Could not add node raclinux1
Any one got it to work on VMWARE?
PMcM

My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?

My auto install for Premiere Elements failed and told me i needed to do a restart and try installing again. Having restarted my laptop, how do I install the software? There are two .exe files in the folder - oem and start-up. Which should i run?
thanks

for windows you should have an exe and a 7z file. put both in the same directory and double click the exe.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Failed to start Admin Server for Weblogic Server Domain

I Created a domain named mydomain in weblogic server 10.3 in server 2003.But when i start Admin Server for Weblogic Server Domain from startmenu, it failed.
I examined the log under domains\mydomain\servers\AdminServer\logs\AdminServer.log and got the following information:
java.lang.NoClassDefFoundError:weblogic/ldap/EmbeddedLDAPChange
at weblogic.ldap.EntryChangeListenerImpl.receiveEntryChanges(EntryChangeListenerImpl.java:28)
Caused by :java.lang.ClassNotFoundException: weblogic.ldap.EmbeddedLDAPChange
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
Caused by :java.util.zip.ZipException: error reading zip file
at java.util.zip.ZipFile.read(Native Method)
at java.util.zip.ZipFile.access$1200(ZipFile.java:29)
weblogic.security.service.SecurityServiceException: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at ...(CommonSecurityServiceManagerDelegateImpl.java:465)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (ServiceEngineImpl.java:365)
Caused by: com.bea.common.engine.ServiceInitializationException: weblogic.security.spi.ProviderInitializationException: A failure occurred attemping to load LDIF for provider RoleMapper from file ...\domains\mydomain\security\XACMLRoleMapperInit.ldift.
at .. (BootStrapServiceImpl.java:910)
Caused by: <openjpa-1.1.1-SNAPSHOT-r422266:891341 nofatal user error>kodo.jdo.UserException: This operation cannot be perfomed while a Transaction is active.
at org.apache.openjpa.kernel.BrokerImpl.close(BrokerImpl.java:4087)
####<Critical><WebLogicServer><SOA><Adminserver><main><<WLS Kernel>><><><1282012271468><BEA-000362><Server failed. Reason:
There are 1 nested errors:
weblogic.security.service.SecurityServiceRuntimeException: [Security:090399] Security Services Unavailable
at weblogic.security.service.CommonSecurityserviceManagerDelegateImpl.doBootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:916)
I ignored some detailed error message.The runtime environment is server 2003 Enterprise Edition sp2.
Thx in advance for any reply.

Hello Djam,
Please review the following:
The FMW WebLogic Server (WLS) installation has been configured to use a non-default Java temporary files directory,
i.e. the following has been set in the WebLogic startup or setDomainEnv.sh script:
EXTRA_JAVA_PROPERTIES="-Djava.io.tmpdir=/appl/oracle/temp_java_files ${EXTRA_JAVA_PROPERTIES}"
Reference: How to Change the WebLogic Server Location for Temporary Files (Doc ID 1336002.1)
When the Middleware home was restored the directory specified by java.io.tmpdir parameter was missing,
Therefore an IOException occurred when opening the wallet and WLS was unable to initialize the OPSS successfully.
To resolve the issue re-create the directory specified by the java.io.tmp dir parameter, and make sure the owner and group access are the same as for the FMW installation.
Unable Start AdminServer: JPS-01050: Opening of wallet based credential store failed. Reason java.io.IOException (Doc ID 1923395.1)
Bogdan

Solaris Cluster and Global Devices for sapmnt

Hi,
IHAC that is considering using Global Devices for /usr/sapmnt in a SAP environment, since they need all SAP nodes looking for the same sapmnt area. Is this a recommended approach?
Generally, we are working with S11.1/Solaris Cluster 4.1 to implement Netweaver 7.2 and ERP 6.0.
I appreciate your comments.
Regards, Rafael.

Hi Rafael,
/usr/sapmnt is a file system, as such I assume when you ask about usage of global devices you really mean to ask about using a global file system (ie. an UFS file system with mount option global)?
If that is true, then the answer is yes.
The data service guide for SAP NetWeaver (http://docs.oracle.com/cd/E29086_01/html/E29440/installconfig-10.html#installconfig-34) does mention in the section "configuration considerations":
"The SAP enqueue server and SAP replica server run on different cluster nodes. Therefore, the SAP application files (binary files, configuration files, and parameter files) can be installed either on the global file system or on the local file system. However, the application files for each of these applications must be accessible at all times from the nodes on which these applications are running."
And the deployment example in the appendix (http://docs.oracle.com/cd/E29086_01/html/E29440/gmlbt.html#scrolltoc) makes use of a global mounted /sapstore file system.
Regards
Thorsten

An error occured attempting to read properties for 'Cluster Group' group. The remote procedure call failed. Error ID:1726 (000006be).

Hi All,
I have a two node 2003 cluster, When any one of the cluster node holding resources goes down, the resources are not failing over to the running node.
In the running node I receive the pop-up error message
""An error occured attempting to read properties for 'Cluster Group' group. The remote procedure call failed. Error ID:1726 (000006be).""
After I click on ok on the pop-up error message the resources are coming online on the running node. If I dont click ok the pop-up error message. The Cluadmin screen is not responding and the resources are not coming online.
In the cluster log i see the below messages realted to Error ID 1726
00000874.00000b10::2014/03/17-23:38:58.276 WARN [EVT] EvtBroadcaster: EvPropEvents for node 2 failed. status 1726
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: ProcessId= 2164
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: SystemTime= 3/17/2014 23:38:58:276
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: GeneratingComponent= 2
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Status= 0xc002100b
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Detection Location= 641
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Flags= 0x0
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Number of Parameters= 2
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Long Val= 32000
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: Long Val= 32000
00000874.00000b10::2014/03/17-23:38:58.276 INFO [NM] RpcExtErrorInfo: ProcessId= 2164
How to FIX this issue?
Regards,
Stunner.

Hi,
Unfortunately, the available information is not enough to have a clear view of the occurred behavior. Base on my experience, it may cause by some of one resource abnormal
failure, I suggest that please schedule a down time to run “Repair Active Directory object” in “Simulate Failue of this resource” status. And the operation “Repair Active Directory Object” will force to update the object’s attributes.
More information:
Understanding the Repair Active Directory Object Recovery Action
http://blogs.msdn.com/b/clustering/archive/2013/12/13/9067582.aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Add GNS and Configure Oracle Infrastructure for Cluster failed

hi
i tried to install Oracle Grid 11g on Oracle Linux EnterPrise edition but i got the following error while
creating the Root.sh files.
*Add GNS 192.168.138.131 -d nisha.......failed
*Configure Oracle Infrastructure for Cluster failed.
plz help me out thanks in advance...

hi
thanks for reply.
if i did not give GNS name then i cannot install it because without GNS i am not able to install
is there anyway to install without GNS?
and if i want to install Typically then its also asking for Scan name
so plz guide me what is scan name and how to configure?
@Levi Pereira
because without that i am not able to install the software plz if i am wrong then
help me out how to install without GNS?
Edited by: nisha on May 17, 2011 4:56 AM

Hyper-V Guest Cluster Node Failing Regularly

Hi,
We currently have a 4-node Server 2012 R2 Cluster witch hosts among other things, a 3 node Guest Cluster running a single clustered file service.
Around once a week, the guest cluster node that is currently hosting the clustered file service will fail. It's as if the VM is blue screening. That in itself is fairly anoying and I'll be doing all the updates and checking event log for clues
as to the cause.
The problem then is that whichever physical cluster node that is hosting the VM when it fails, will not unlock some of the VM's files. The Virtual machine configuration lists as Online Pending. This means that the failed VM cannot be restarted
on any other cluster node. The only fix is to drain the physical host it failed on, and reboot.
Looking for suggestions on how to fix the following.
1. Crashing guest file cluster node
2. Failed VM with shared VHDX requiring Phyiscal host reboot.
Event messages for the physical host that was hosting the failed vm in order that they occured.
Hyper-V-Worker: Event ID 18590 - 'FS-03' has encountered a fatal error. The guest operating system reported that it failed with the following error codes: ErrorCode0: 0x9E, ErrorCode1: 0x6C2A17C0, ErrorCode2: 0x3C, ErrorCode3: 0xA, ErrorCode4:
0x0. If the problem persists, contact Product Support for the guest operating system. (Virtual machine ID 36166B47-D003-4E51-AFB5-7B967A3EFD2D)
FailoverClustering: Event ID 1069 - Cluster resource 'Virtual Machine FS-03' of type 'Virtual Machine' in clustered role 'FS-03' failed.
Hyper-V-High-Availability: Event ID 21128 - 'Virtual Machine FS-03' failed to shutdown the virtual machine during the resource termination. The virtual machine will be forcefully stopped.
Hyper-V-High-Availability: Event ID 21110 - 'Virtual Machine FS-03' failed to terminate.
Hyper-V-VMMS: Event ID 20108 - The Virtual Machine Management Service failed to start the virtual machine '36166B47-D003-4E51-AFB5-7B967A3EFD2D': The group or resource is not in the correct state to perform the requested operation. (0x8007139F).
Hyper-V-High-Availability: Event ID 21107 - 'Virtual Machine FS-03' failed to start.
FailoverClustering: Event ID 1205 - The Cluster service failed to bring clustered role 'FS-03' completely online or offline. One or more resources may be in a failed state. This may impact the availability of the clustered role.

Hi,
I don’t found the similar issue, Does your cluster can pass the cluster validation? Does all your Hyper-V host compatible with Server 2012r2? Have you try to disable all your
AV soft and firewall? Please rerun Storage validation on the Cluster in non-production hours, the cluster validation report will quickly locate the issue.
More information:
Cluster
http://technet.microsoft.com/en-us/library/dd581778(v=ws.10).aspx
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Starting global heartbeat for cluster "d8aed2bb8ab9381d": Failed

Similar Messages

Maybe you are looking for