--Static problem with inspire p5800 speaker setup--

Hi,
I have recently purchased this speaker system (refurbished) and after hooking it up, I noticed static, a permanent eerie sound that is coming out of the speakers and I dont know how to get rid of this. I have a SB Live card, don't know if it is compatible or not but I get output, its just that the static is present and very annoying. Any suggestions will be appreciated, thanks.

I think it depends on the soundcard, I don't know that model, but maybe it simply isn't able to sense a headphone is plugged in? I know SoundMax chips are able to, and Sound Blaster probably are too, but I can't seem to find that piece of information on realtek's site... So (please other users, correct me if I'm wrong!!?) I'm afraid you are just going to have to learn to live with muting center, LFE/Sub and surround channels when using headphones...
EDIT: I think the headphone jack will still work if you switch the set off, would be easier than resetting all volumelevels everytime you are done using the headphones.
Message Edited by hij on 01-28-2007 02:31 AM

Similar Messages

Problem with Inspire P5800

When I connect my headphones (Creative EP 80) to the remote control of Creative Inspire P5800, it's satellites don't mute automatically
I have integrated souncard based on ALC 655 and Windows XP (licensed).
What should I do to solve this problem?
sorry for my mistakes in english, it's not my native language
Message Edited by Konstantin on 01-27-2007 10:25 PM

I think it depends on the soundcard, I don't know that model, but maybe it simply isn't able to sense a headphone is plugged in? I know SoundMax chips are able to, and Sound Blaster probably are too, but I can't seem to find that piece of information on realtek's site... So (please other users, correct me if I'm wrong!!?) I'm afraid you are just going to have to learn to live with muting center, LFE/Sub and surround channels when using headphones...
EDIT: I think the headphone jack will still work if you switch the set off, would be easier than resetting all volumelevels everytime you are done using the headphones.
Message Edited by hij on 01-28-2007 02:31 AM

Having Problem With Inspire 5.1 5300 rear speaker...

After using my inspire 5.1 5300 for few year... right now im having problem with my rear speaker... just one channel was unable to start... Anyone know about repairing for speaker ? I Have try to switch to other channel it seem that just that rear speaker was unable to start... all should be ok... week before i still hearing sound from that rear speaker... but now it was unable to start. Anyone Have Any Idea Please Tell Me. Thank You

Just to clarify, by "FCP 5 friendly source material," he means video files that are a format (codec) that FCP 5 supports. What FCP 5 supports can be found in the EASY SETUP list. If the format you are working with isn't there, say if your footage is H.264 or MP4 or some other web compressed format, FCP won't work properly. It needs to be in an editing codec if you want FCP 5 to work with it.
Also, you need to make sure that your sequence settings match the settings of the footage you are trying to edit. If you add a clip to the sequence, and immediately have to render, that's a big clue to say that something isn't right. You should edit without rendering at all.
The most important thing you need to do is properly set up your project from the start, and the best way to do this is to choose a setting from the Easy Setups, located under the Final Cut Pro menu. Once you do this, you’ll need to create a new sequence. This is because the sequence that is already in your new project is setup for the typical default setting of DV/NTSC, or for the settings of your last project, which might not match what you are currently working with. So delete SEQUENCE 1 and create a new sequence:
This new sequence will contain the settings you chose in the Easy Setup menu, and should match the format you captured

After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

After upgrade to ios7, few time i am having problem with my sound/speaker with terroble sound effect like machine or something.but after restart it will be fine.but how this thing can be fix? Because i never had this problem before upgrade to ios7.tq

Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues.

I have a problem with the phone speaker

I started yesterday to have a problem with the phone speaker, I cant hear anything when using the normal speacker, but its ok when using the loud speaker. I dont know what happened. its not working nether with phone calls nor calling apps such as viber

If you have a docking station try putting it on there. I lost my sounds, docked it and they came back immediately.

Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update

Hi i am having problems with a crackling speaker on calls. Its started with every once a hour or so, to now being every call. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... What should i do. I have now resulted in using another phone as i cannot operate like this...

Hi i am also having problems with a crackling speaker on calls every few calls. Its starts crackling and then the person on the other side cannot hear me. I run iPhone 4 with iOS 5 an this happend after update to ios 5... I will watch to see what advice you get.

Problem with inspire 5100 digital decoder

I have some problem with the decoder included with the Inspire 500 digital. I usually have it connected by soundblaster's audigy digital out to decoder's coaxial digital in (SPDIF). and recently sound has dissaperas replaced by a chipping and cropping low noise. Have you any ideas about it's. When I connect the soundblaser's speakers out to decoder's line in works only for stereo (losing 5.1 capabilities), and bypassing the decoder i can get 5.1 sound, but i can't use the included remote control to change volume or anything.
Thank you.
I'm sorry for my poor english, it's not my native lenguage.

I'm not sure exactly how you're connecting things. You say you connected an optic out to a digital DIN on the receiver? These are totally different connectors.
The output on the card itself isn't optical. What you could use is a minijack to RCA (female) adapter, and then connect a standard RCA to RCA, male to male (SPDIF) cable to that, which plugs into the coaxial input on the receiver. Alternati'vely you could use a minijack to Digital DIN adapter and connect the DIN cable to that, and connect to the receiver.
Do you have the SBLi've 24-bit External? Do you mean you connected the optical output to the optical input on the receiver?
It may be best to contact Customer Support to speak to them one-on-one, to go over the connections and settings, if you're unsure of which to use.
Cat

Problem with inspire 280 speakers

well i own creative inspire 280 speakers but im having trouble with them. First when i connect it to some devices background electric noise appears when im not playing anything, then if I connect the jack till the end, the played sound will only be mono, the only way to play it stereo is if i dont put the 3,5mm jack till the end but it still shows some background noise. How can i solve this issue?

i have a similar problem with my 280 speakers.

Audio static problems with video playback - Anyone Else?

I went to archive.org and downloaded two movies for my iPod. Great. However, when played on the iPod there is this scratch/pop in the headphones every couple of seconds.
It doesn't matter what headphones you use.
It doesn't happen when you play the same video on the computer either in iTunes or Quicktime Player. And this is definitely more than the normal hiss and pop of old movies. Its piercing when you have in ear headphones on and quite distracting with apple buds.
What I am wondering if this is a problem with all iPods or just mine?
I don't have the problem with music videos or home made movies. Just the two movies I downloaded from archive.org. However, they do play fine on my computer. This is my last day to return the iPod and get a new one instead of service unit (which his actually probably new also because the Apple Service dept probably hasn't had refurbs yet, but I digress).

I'm having the same problem with a file from archive.org. The file plays back fine using QT on my PC, but on the ipod the audio has periodic bursts of static.
Here's a link to a file that exhibits the problem:
http://www.archive.org/download/disorderin_the_court/disorder_in_the_court256kb.mp4
Movie info is: MPEG-4, 320x240, Millions
AAC, Stereo (L R), 48.000 kHz
Movie FPS 29.97
Data Rate 346.70 kbits/sec

Problems with email on wizard setup

Hi
I have recently purchased a blackberry pearl 8110 on O2.
When I go into the wizard to set up my emails it only gives me two options
1. I want to use a work account with Blackberry Enterprise Server
2. Skip e-mail set up
I.e. it doesn't give me the option to enter an e-mail address - could there be a problem with my settings.
Thanks
C

ciara, Greetings, and welcome to the BlackBerry.com Support Forums.
You'll find that is the most often asked question in this forum. It's been asked and answered thousands of times.
Do you have a BlackBerry Data Plan enabled on your account with your carrier or mobile provider?
You must, in order to get the RIM push email setup screen for personal email, and the BlackBerry data services such as the internet browser, Facebook for BlackBerry, BlackBerry Messenger, and much more.
So, call your carrier and inquire about having the BlackBerry Data Plan added to your account.
Good luck.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Problem with inspire t7900

Hi,i just bought inspire t7900 speakers and i have a big problem..
there is no sound! actually i have tried everything..there is no connection problem,i also bought
the creative sound blaster audigy which is recomended for this kind of speakers,i have checked anything about settings but nothing...i also have tried different operating systems(xp home sp2,xp proffesional sp2) but the problem remains..
if you need additional information, my pc is new very good system(intel core quad proccessor,motherboard asus p5kc) so i can't find out where is the problem!
can anyone help me plz?

Hi, I have the same problem. Actually, it was working for a while, then all of a sudden: no sound from any of the speakers! Plugging headphones into the remote works, so there doesn't seem to be a problem with the connection between computer and the system; but there's definitely something wrong with the speakers... Any ideas here? I was really enjoying them up to this point...

HELP! K8N NEO4 SLI - SOUND PROBLEMS WITH INSPIRE 7.1

People, i bought K8N NEO4 SLI, and i'm having problems with my Creative Inspire 7.1. I have certain that everything is connected in a correct way, drivers ok, but the side surround speakers doen't make no noise. Creative media is set to 7.1 channels and the speakers too...
I'm thinking that the onboard audio is a bul....
Can someone help me with this? Who here has the same kit as me?
Thanks a lot
Edinho
(brazilian guy)

Man, i'm using those standart cables offered with the product....i thing its analog, i don't know certain...
i'm very about this onboard sound...
and the worst thing, i'vc contacted creative for explanation about it and they answer me that they could'nt help, cause it's a OEM product...no response about it, have to contact MSI..
here in brazil, it's real difficult, cause anoyone cares about it...
i have absolut certain that software and hardware configuration/instalation is ok...cause i had those speakers in other PC...
i've already head tons of audio-problem topics here, and i say: K8N N4 SLI Integrated Sound is a bul...

Has anyone had a problem with no ear-speaker noise when making calls on iPhone 5? Usually work after first call

So I got my iPhone. Had problems with the screen and took it back for a stock replacement. The replacement I noticed about two weeks later that when I make calls, 80% of the calls wouldn't make a noise. I would then look at the screen and see its been answered and the seconds are counting away. I'd hang up and try again which would always work.
I've tried a restore. Twice in facts.
Has anyone else had this problem? I'm running the up to date software but think it could be a hardware problem.

Thank you so much. You have solved my problem. I never thought to click the down arrow. In all the time I have been printing, on any program, the entire window opened up when I clicked on the print button. This one never did. I don't understand why Adobe support never told me about that when I called them.

Apple ID Problem with Incorrect username/password setup

Hello all,
I'm trying to help my sister-in-law with a problem with her Login details for Apple Store. She has no skills in this department, so she asked a friend (?!) to help her. Somehow things were done that allowed her to establish an account, altho frankly I am not sure how it was activated. She used her old email address at that time, which she has in the meantime replaced with a new address from another ISP. I managed to establish an ID using the new address, but she has an iPad registered under her old Apple ID.
Nothing was written down, and nowhere can I find an 8 letter password with the Capital Letter and Number system as required by Apple. The help questions which were established when compiling the old address can't be answered, because she didn't write down either the data, or the answer. From all this, you can judge that I'm frustrated at trying to do more for her.
I can't understand how, or if, one could cancel the old details in favor of the new. Or whether it might work if I "Restore" the iPad according to the instructions in iTunes when the iPad is attached, and try to register it under the new user/password I established.
We live very remotely, so popping into a local store for help is not possible. I've tried, with my limited knowledge, everything I can, but I've got nowhere. So, can any kind soul who might have had to go done this route, or who might have a possible clue to what I could do, perhaps help me out? I'll bet its staring me in the face, but as an old guy, my instincts aren't as sharp as they were.
Very many thanks to anyome reading this post, who might be able to give me some assistance.
Barrie

Hi barrie,
Well, sounds like you have half the problem fixed. But for the original account, even though you can't remember the answers to the original security questions, you CAN contact Apple Support to have them reset them for you. Once they are reset, also reset the password to whatever the password on the new account is so they are seamless.
Also, on both accounts be sure to set up a RESCUE EMAIL ADDRESS with the Security Questions. This will prevent any issues down the road with forgotton passwords/security questions, and will allow you to recover in a much easier way than this has been.
But again, for the original account. You need to do the following:
1. Contact Apple Support, provide them with the Original Apple ID, and let them know that you need to have the Security Questions reset.
2. Once that is done, set up new Security Questions for that old Apple ID as well as a RESCUE EMAIL ADDRESS with those new Secuity Questions
3. Reset the Password on that Old ID to be the same as the one on the new ID (and keep it consistent - any time you change the new one, change the old one)
4. Sign into iTunes one last time with that old ID and use up your $15
Now, forget the old ID altogether except when you need to update the password to match the new one. Once you have done your final redemption, only the new Apple ID should exist for you. All apps and music purchased in the same iTunes Library with either ID will be able to be loaded onto the iPad. When one of the apps needs to be updated, it may display the old ID, or it may display the new ID - if the password is the same, it won't matter which is displayed for the update. Put in the password, and it will update.
Whatever you do - Don't delete the apps purchased with the old ID. Once you get it squared away it will just be like a "phantom" id in the backround. Not really used, but still associated with the apps purchased under it. As long as they all live in the same iTunes Library, the ID they were purchased under is irrelevant. The only thing that matters after that is the password (as explained above) for any updates.
For the iPads themselves, make sure that the new Apple ID is showing for the iCloud account. This is what ties the Apple ID being used to do purchases via the iPad.
I hope the info I have provided has helped, and that your trip to Canberra will be a success. Sounds like an all-around nightmare, and you have been a very patient and sweet brother-in-law to stick with this whole thing.
Best of luck, and do let me know how it all turns out! I would love a line from you as the adventure progresses!!!
Cheers,
GB

Problem with Inspire 6.1 6600 subwoofer

Hello,
All of my other speakers work except for the Sub......
It is strange because everything is connected to the sub, the sound of the other speakers is good and the calibration via the Creative software reads good.
Still, the sub just doesn't make any sound.....
I have this speaker system since 2002......
Does anyone have any suggestion as to why my sub doesn't work?
Gal.

6.1 6600 speakers will have every satellites giving out different sounds and reverberation. If you have those all similare, your sound card might not be supporting channel output.
With my experience with creative, the speaker systems are not suposed to be operated at full volume, at full bass enhan*****t. The reasons are:
1) The power supply will be one-third more capable than the speaker rating. So, full amplification of the sound signal is not preferable.
2) Even if the fidility of sound card is excellent with more than 98 dB SNR, the amplifier at the speaker system need not be as good as that at the card (because, it amplifies the signal to much higher a value)
3) As I have seen with most of the speaker systems (including high end theatres), the bass enhan*****t is fully functional with woofer and subwoofers of more than 100 watt RMS. That too will exhibit chattering after an year or two, at high volumes.

--Static problem with inspire p5800 speaker setup--

Similar Messages

Maybe you are looking for