Steps in converting a xml file with an rtf template to a pdf

Hey all,
What are the steps in converting a xml file with an rtf template to a pdf using XML Publisher from command line.
Thanks
Ravi

I don't have any code to do exactly what you wish, but it shouldn't be too difficult and http://www.dadhi.com/2007/06/generate-and-store-pdf-file-in-same.html is a good starting point.
Paul

Similar Messages

HT1660 My "itunes library" folder is empty. My libray music (prior to upgrading itunes) is now in an .xml file in my itunes location under my music. How do I extract/convert this .xml file to a Itunes database and restore my Itunes music library??? Than

My "itunes library" folder is empty. My libray music (prior to upgrading itunes) is now in an .xml file in my itunes location under my music. How do I extract/convert this .xml file to a Itunes database and restore my Itunes music library??? Thanks, Tom

Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Failed to load XML file with Content ID 'XYZ'

Hello,
We are using UCM Version:11.1.1.8.1DEV-2014-01-06 04:18:30Z-r114490 (Build:7.3.5.185) with site studio for creating templates and web sites.
While switching to contribution mode, we find 'Failed to load XML file with Content ID 'XYZ' error.[Here XYZ is the local checkin content]
In region we are using dynamic converter to convert the style of native document here below are region and its element details.
<region id="region3" name="Add_Content_Here" flags="1111111100100" metadata="xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue" dccommand="ssIncDynamicConversionByRule(SS_DATAFILE, 'Colleges_Template_Rule')">
      
      <element id="region3_element1" name="Editor" label="Editor" type="1" flags="111111111111111111111100000111100000000000001111001110111010001111101000000000000000000000000000">
        
        <linktoregioncontent createnewxml="true" createnewnative="false" choosemanaged="true" chooselocal="false" choosenone="false">
          <choosemanagedquerytext corecontentonly="FALSE">
            <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
          </choosemanagedquerytext>
        </linktoregioncontent>
      </element>
      <switchregioncontent createnewxml="true" createnewnative="true" choosemanaged="true" chooselocal="false" choosenone="false">
        <createnewnativedoctypes >
          <![CDATA[.doc,.docx,.txt,.rtf]]>
        </createnewnativedoctypes>
        <choosemanagedquerytext corecontentonly="FALSE">
          <![CDATA[xWebsiteObjectType <Matches> `Data File` <OR> xWebsiteObjectType <Matches> `Native Document`]]>
        </choosemanagedquerytext>
        <defaultmetadata >
          <![CDATA[xIdcProfile%3AisHidden%3Dtrue%26xTemplateType%3AisHidden%3Dtrue%26xCollegesList%3AisHidden%3Dtrue%26xShowInStudents%3AisHidden%3Dtrue%26xShowInStaff%3AisHidden%3Dtrue%26xShowInVisitors%3AisHidden%3Dtrue%26xShowInFaculty%3AisHidden%3Dtrue%26xArticleSection%3AisHidden%3Dtrue%26xDiscussionCount%3AisHidden%3Dtrue%26xDiscussionType%3AisHidden%3Dtrue%26dpTriggerValue%3DCSE]]>
        </defaultmetadata>
      </switchregioncontent>
    </region>



Regardrs,
Syed

Hi Syed ,
Add the following trace sections :
requestaudit,sitestudio*,system + Full verbose tracing
Clear the server output .
Replicate the same steps and once error shows up , refresh server output and copy the logs to a text file and upload here .
Thanks,
Srinath

Does anyone know how to convert an XML file to a readable file?

All,
I have been using an APP called "SMS Backup & Restore" to backup my message conversations to my Laptop PC. It works fine BUT the backup file, once in my PC, has an XML extent such as "filename.XML"
I would like to read and/or print and/or save the text message file so does anyone know how to convert the XML file to something else so it shows all the messages without all the formatting instructions.
When I try to see the XML file it shows all the formatting. If I replace the .XML with .TXT that too shows all the formatting mixed in with the text message narrative.
When I look at the XML file in SMS Backup & Restore in the Charge phone it looks great showing all the messages just as they were on the phones display. The problem with this is that there is no way to print or read or save the messages as they appear in the file from the phone itself. I tried screen capture but if you have, let's say, a 28 message conversation you have to do 7 or 8 screen captures to get them all.
If only I could convert the XML in my PC to something that is printable or savable or readable that would be the "cats meow."
Anyone know how???
JerryF
PS, You might take a look at my related post.
https://community.verizonwireless.com/message/809832#809832

Ann154,
You were correct again. I deleted everything I had done to date and re-did the entire SMS backup of my 28 message conversation again and YES I was able to open it using IE-8. It looks great and it prints great and life is good! I am going to go make a donation.
Thanks again for the help. I marked this thread as answered by you.
JerryF

Steps for the IDOC TO FILE with ACKNOWLEDGMENT

Hello experts,
Kindly give me the step by step procedure for the following scenario.
My scenario is an IDOC( any idoc) for R/3 is coming to XI and send to FTP as XML file with out any modifications, and ftp have to send an response (acknowledgment) to XI and that to R/3 as an IDOC.
I have seen snd but i not able to find the exact steps for the above requirement. Probably i may failed to find it.
So kindly give me the steps or any blogs links explaining the above scenario.
Thanks inadvance.
Kiran.

Hi
Pls check the following docs.
ALEAUD not coming to SAP from XI & u0093Acknowledgment not possible" in idx5
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/903a0abc-e56e-2910-51a8-9dc616df56eb
if you are looking to receive the File Acknowledgements..pls check the below link
/people/michal.krawczyk2/blog/2006/06/22/xi-playing-with-the-file-adapters-acknowledgments
Regards
Abhijit

Modifying XML files with JDOM

Hi:
I've been trying to get up to speed with JDOM, and while it seems pretty intuitive, I've been having a problem w/ modifying XML documents.
Namely, once I get a Document object from a (skeleton) XML file, do changes made to the Document object through, say, addContent() propagate to the original file? My gut feeling is no, although this was certainly what I had expected initially.
Here's a code fragment of what I had tried to do to populate a barebones XML file:
               Document doc = builder.build(output);
          // add 100 elements, all the same
          for (int count = 0; count < 100; count++)
               Element curr = new Element("book");
               // create child nodes for book
               Element title = new Element("title");
               title.addContent("Book " + (count + 1));
               Element author = new Element("author");
               author.addContent("Author " + (count + 1));
               Element price = new Element("price");
               price.addContent("Price " + (count + 1));
               curr.addContent(title);
               curr.addContent(author);
               curr.addContent(price);
               doc.getRootElement().addContent( curr );
          }

Mikael,
This sounds like one of the many quirks (perhaps bugs) related to how FrameMaker handles non-FM files in books. The current book model doesn't play well with XML files as chapters and this seems like yet another problem. Apparently, if an xref does not target another .fm file in the book, Frame assumes that the target file is not in the book and therefore will not be in the book PDF.
There have been discussions here about this in the past. The solution that I use is to run an API client before publishing that converts all XML files to .fm files, and redirect all xrefs appropriately. Then, book features work as expected and PDFs come out as normal. This is not feasible, however, without the automation from the API client.
There may be some who would say that the best approach is to use XML and books the way that the designers did account for... that is, the whole book becomes an XML document with entity references to the separate chapters. In my work, though, this model was not appropriate... rather, I needed a binary FM book to act like a book, except with XML files as chapters. So, I think I understand your situation.
Is API programming or FrameScript an option for you? I think it may be the only way to get what you are looking for.
Russ

One to many xml files with file adaptor

Hi,
I have a scenario HCM-ABAPProxy--XI-File for one structure I need to generate multiple xml files with 100 records per file.
this is my input messag
MT_in
Node
     PositionIDs
        descrption
        job
        IsActive
what I was doing on the ABAP side for every node I have 100 PositionID's sub nodes. so each node should be a sperate file.
my output structure is
PositionIDs
    PositionID
      pid
      description
      job
so there should be one PositionIDs per file which contains 100 PositionID.
I've multi message mapping without BPM that did not work out just wondering if any one came across the same scenario.
thanks,
Joe

You can not create multiple files without BPM. You can pretty much perform multi mapping to achieve your split but to write it to a file, you will have to call the file adapter for each split which you can not do without using BPM. In BPM, for each split that you perform, you can use a send step in for-each loop which will give you the functionality you require.
Award if helpful,
Sarath.

Sending XML Files with Certificate

Hello everybody.
I need develop an abap program for sending XML files with a certificate.
How I can create this certificate?
Somebody have an idea?
Thank you everybody.
Nelson

Mikael,
This sounds like one of the many quirks (perhaps bugs) related to how FrameMaker handles non-FM files in books. The current book model doesn't play well with XML files as chapters and this seems like yet another problem. Apparently, if an xref does not target another .fm file in the book, Frame assumes that the target file is not in the book and therefore will not be in the book PDF.
There have been discussions here about this in the past. The solution that I use is to run an API client before publishing that converts all XML files to .fm files, and redirect all xrefs appropriately. Then, book features work as expected and PDFs come out as normal. This is not feasible, however, without the automation from the API client.
There may be some who would say that the best approach is to use XML and books the way that the designers did account for... that is, the whole book becomes an XML document with entity references to the separate chapters. In my work, though, this model was not appropriate... rather, I needed a binary FM book to act like a book, except with XML files as chapters. So, I think I understand your situation.
Is API programming or FrameScript an option for you? I think it may be the only way to get what you are looking for.
Russ

Converting an XML file to a DAT pipe delimited file

Hi
I'm trying to create an SSIS Package which converts an XML file into a dat file which is pipe delimited.
I want the package to be generic so that once that minimal modification is needed when using for different files.
I've so far had no luck with this and need some help/assistance.
All help fully appreciated.
Thank you
Umar Javed

The XML file can vary from fixed to variable.
for Fixed, i've done the same thing as you've suggested and parametrized the flat file connection manager.
For The XML source is there any way we can parametrize the location of the XML or XSD files?
For Variable, unfortunately due to restrictions we can not create an intermediate table and then export.
is there any other way?
Thanks
Umar Javed
XSD path can be made dynamic as below
http://picnicerror.net/development/sql-server/define-xsd-file-for-ssis-xml-source-using-expression-2012-04-21/
For variable you can even add them to configurations and then pass them from a file using xml configuration option.
Please Mark This As Answer if it solved your issue
Please Mark This As Helpful if it helps to solve your issue
Visakh
My MSDN Page
My Personal Blog
My Facebook Page

Read xml File with counter

I have a question, but I posted it on the wrong forum. This is the link:
https://social.msdn.microsoft.com/Forums/en-US/899c8291-70f5-4c1b-abf2-a1a1242e017a/read-xml-file-with-counter?forum=visualstudiogeneral&prof=required

Hi,
I have created a program that read an xml file like this:
<xas>
<information>
<list>"12345"</list>
<version>1.0.0.1</version>
</information>
<word><n>0</n><v>test123v</v><a>test123a</a></word>
<word><n>1</n><v>testv</v><a>testa</a></word>
</xas>
I read it to a listview called listview1:
The MainWindow.xaml:
<Window x:Class="MainWindow"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="" Height="1220" Width="1017" WindowStartupLocation="Manual" ScrollViewer.HorizontalScrollBarVisibility="Visible" ScrollViewer.CanContentScroll="True" UseLayoutRounding="False" WindowState="Maximized">
<Grid>
<ListView x:Name="ListView1" HorizontalAlignment="Left" Height="1220" VerticalAlignment="Top" Width="1017">
<ListView.View>
<GridView x:Name="Lijst">
<GridViewColumn x:Name="Vraag" Header="Vraag" DisplayMemberBinding="{Binding Vraag}">
</GridViewColumn>
<GridViewColumn x:Name="Antwoord" Header="Antwoord" DisplayMemberBinding="{Binding Antwoord}">
</GridViewColumn>
</GridView>
</ListView.View>
</ListView>
</Grid>
</Window>
And this is MainWindow.xaml.vb:
Imports System.IO
Imports System.Reflection.Assembly
Imports System.Xml
Imports System.Data
Class MainWindow
Dim VraagListBox As New ListBox
Dim AntwoordListBox As New ListBox
Dim Hoofdmap As String = GetExecutingAssembly().Location
Dim Bestand As String
Private Sub MainWindow_Loaded(sender As Object, e As RoutedEventArgs) Handles Me.Loaded
'RUNNEN MAAR!!!!
'Het bestand vinden in de commandline argumenten
Dim args() As String = System.Environment.GetCommandLineArgs()
Dim Teller As Integer = "0"
For Each arg As String In args
If Teller = "1" Then
Bestand = arg
Else
Teller = Teller + "1"
End If
Next
Bestand = "D:\Alles voor school!\Alles voor school!\Vakken\Stepping Stones\DATA1\Hoofdstuk 1\Leerlijsten\Hoofdstuk 1 Grammer 1.xas"
'Welk bestand? Set de title
Me.Title = Path.GetFileName(Bestand) & " - ListViewer (V.1.0.0.6)"
If Bestand <> "" Then
'Vragen en antwoorden toevoegen in de kolommen
If Path.GetExtension(Bestand) = ".xas" Then
Dim orderInfo = XElement.Load(Bestand)
For Each entry As XElement In orderInfo...<word>
Dim thisOrder As New Order
With thisOrder
.Vraag = entry...<v>.Value
.Antwoord = entry...<a>.Value
End With
ListView1.Items.Add(thisOrder)
Next
'Virtuele vraaglistbox toevoegen = kolom Vraag van LisView1
Dim orderInfoVraag = XElement.Load(Bestand)
For Each entry As XElement In orderInfoVraag...<word>
Dim thisOrderVraag As New VraagClass
With thisOrderVraag
.Vraag = entry...<v>.Value
End With
VraagListBox.Items.Add(thisOrderVraag)
Next
'Virtuele antwoordlistbox toevoegen = kolom Antwoord van LisView1
Dim orderInfoAntwoord = XElement.Load(Bestand)
For Each entry As XElement In orderInfoAntwoord...<word>
Dim thisOrderAntwoord As New AntwoordClass
With thisOrderAntwoord
.Antwoord = entry...<a>.Value
End With
AntwoordListBox.Items.Add(thisOrderAntwoord)
Next
'Check wat er fout is aan het bestand, en geef een melding
Else
MessageBox.Show("Er is een verkeerde extentie geselecteerd, namelijk: " & Path.GetExtension(Bestand) & ".", "Verkeerde extentie - ListViewer", MessageBoxButton.OK, MessageBoxImage.Error)
Me.Close()
End If
Else
If Bestand = "" Then
MessageBox.Show("Je hebt geen bestand geselecteerd", "Geen bestand geselecteerd - ListViewer", MessageBoxButton.OK, MessageBoxImage.Error)
Me.Close()
Else
MessageBox.Show("Er is iets misgegaan met het laden van het bestand, probeer het later opnieuw", "Onbekende error - ListViewer", MessageBoxButton.OK, MessageBoxImage.Error)
Me.Close()
End If
End If
End Sub
Private Sub ListView1_MouseDoubleClick(sender As Object, e As MouseButtonEventArgs) Handles ListView1.MouseDoubleClick
Directory.CreateDirectory(Path.GetTempPath & "110% Soft\ListViewer 1.0.0.6\" & Path.GetFileName(Bestand))
Dim SchrijfVraag As New StreamWriter(Path.GetTempPath & "110% Soft\ListViewer 1.0.0.6\Word.txt")
Dim SchrijfFile As New StreamWriter(Path.GetTempPath & "110% Soft\ListViewer 1.0.0.6\File.txt")
SchrijfVraag.WriteLine(ListView1.SelectedIndex)
SchrijfFile.WriteLine(Bestand)
SchrijfVraag.Close()
SchrijfFile.Close()
Dim WoordenScherm As ViewWord
WoordenScherm = New ViewWord()
WoordenScherm.ShowDialog()
End Sub
End Class
ViewWord.xaml is:
<Window x:Class="ViewWord"
xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation"
xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml"
Title="ViewWord" Height="155" Width="1017" ResizeMode="NoResize" SizeToContent="WidthAndHeight" Topmost="True" WindowStartupLocation="CenterScreen">
<Grid>
<Label x:Name="VraagLabel" Content="Vraag:" HorizontalAlignment="Left" Margin="23,11,0,0" VerticalAlignment="Top" Width="106"/>
<TextBox x:Name="VraagTextBox" HorizontalAlignment="Left" Height="24" Margin="134,13,0,0" TextWrapping="Wrap" VerticalAlignment="Top" Width="743" />
<Label x:Name="AntwoordLabel" Content="Antwoord:" HorizontalAlignment="Left" Margin="23,42,0,0" VerticalAlignment="Top" Width="106"/>
<TextBox x:Name="AntwoordTextBox" HorizontalAlignment="Left" Height="24" Margin="134,44,0,0" TextWrapping="Wrap" VerticalAlignment="Top" Width="743"/>
<Button x:Name="VraagAanpassenButton" Content="Aanpassen" HorizontalAlignment="Left" Margin="882,15,0,0" VerticalAlignment="Top" Width="107"/>
<Button x:Name="AntwoordAanpassenButton" Content="Aanpassen" HorizontalAlignment="Left" Margin="882,44,0,0" VerticalAlignment="Top" Width="107"/>
<Label x:Name="VraagNummerLabel" Content="Vraagnummer:" HorizontalAlignment="Left" Margin="23,72,0,0" VerticalAlignment="Top" Width="106"/>
<TextBox x:Name="VraagNummerTextBox" HorizontalAlignment="Left" Height="24" Margin="134,74,0,0" TextWrapping="Wrap" VerticalAlignment="Top" Width="743"/>
<Button x:Name="VraagNummerAanpassenButton" Content="Aanpassen" HorizontalAlignment="Left" Margin="882,74,0,0" VerticalAlignment="Top" Width="107"/>
</Grid>
</Window>
In VraagTextBox must come the entry <word><v>test123v</v></word>, in AntwoordTextBox must come the entry <word><a>test123a</a></word>, and in VraagNummerTextBox must come the entry <word><n>0</n></word>
This is the code to fix that (ViewWord.xaml.vb):
Imports System.IO
Public Class ViewWord
Private Structure AntwoordVraag
Public Vraag As String
Public Antwoord As String
End Structure
Private Sub ViewWord_Initialized(sender As Object, e As EventArgs) Handles Me.Initialized
End Sub
Private Sub AntwoordAanpassenButton_Click(sender As Object, e As RoutedEventArgs) Handles AntwoordAanpassenButton.Click
Dim Vraagnummer As String
Dim Bestandsnaam As String
Dim LeesVraag As New StreamReader(Path.GetTempPath & "110% Soft\ListViewer 1.0.0.6\Word.txt")
Dim LeesFile As New StreamReader(Path.GetTempPath & "110% Soft\ListViewer 1.0.0.6\File.txt")
Vraagnummer = LeesVraag.ReadLine()
Bestandsnaam = LeesFile.ReadLine()
LeesVraag.Close()
LeesFile.Close()
MessageBox.Show(Vraagnummer)
Dim teller As Integer = 0
Dim orderInfo = XElement.Load(Bestandsnaam)
If teller = Vraagnummer Then
VraagNummerTextBox.Text = orderInfo...<word>...<n>.Value
VraagTextBox.Text = orderInfo...<word>...<v>.Value
AntwoordTextBox.Text = orderInfo...<word>...<a>.Value
Else
teller = teller + 1
End If
End Sub
End Class
But the result isn't:
VraagTextBox.Text = testv
AntwoordTextBox.Text = testa
NummerTextBox.Text = 1
if i click on the number 2 of the listview (index = 1)
How can i fix it?

Binding Xml file with Xsd Schema

Hello
everybody there.
I am trying to make an application where word files are converted into xml.
For that i have used org.exolab.castor and org.apache.poi.hwpf.
Now the problem is that i was able to generate the xml file from word, but when i am binding it with XMLSchema.xsd following error is coming.
java.lang.IllegalArgumentException: getSimpleType: the simple type 'formChoice' is not a built-in type as defined in XML Schema specification.
     at org.exolab.castor.xml.schema.Schema.getSimpleType(Schema.java:1289)
     at org.exolab.castor.xml.schema.Schema.addSimpleType(Schema.java:583)
     at org.exolab.castor.xml.schema.reader.SchemaUnmarshaller.endElement(SchemaUnmarshaller.java:643)
     at org.exolab.castor.xml.schema.reader.Sax2ComponentReader.endElement(Sax2ComponentReader.java:198)
     at org.apache.xerces.parsers.SAXParser.endElement(SAXParser.java:1392)
     at org.apache.xerces.validators.common.XMLValidator.callEndElement(XMLValidator.java:1550)
     at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1149)
     at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:381)
     at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:1098)
     at org.exolab.castor.builder.SourceGenerator.generateSource(SourceGenerator.java:430)
     at org.exolab.castor.builder.SourceGenerator.generateSource(SourceGenerator.java:485)
     at TempHwpf.<init>(TempHwpf.java:35)
     at TempHwpf.main(TempHwpf.java:44)the code for binding my xml file with xsd schema is as under:-
SourceGenerator sourcegen = new SourceGenerator();
sourcegen.getVersion();
System.out.println(sourcegen.getVersion());
sourcegen.generateSource("XMLSchema.xsd","packagename");I have checked XMLSchema.xsd file, in that formChoice is already defined, than also error is coming.
can anyone help me out. first i thought that XMLSchema.xsd which i have is not proper, but i downloaded it again from w3c.org,
than also same error is shown.
please help me out.
waiting for reply.
milind

Please do not double-post. http://forum.java.sun.com/thread.jspa?threadID=5134447&tstart=0
Then use Stax (Woodstock) or Saxon.
- Saish

How can I save a XML file with JAXP1.1?

Dear All.
I write a program to create XML file with DOM model, but I can't know how to save it? My environment is JAXP1.1 and JDK1.3.1,I has been required not use other XML parser toolkits,only JAXP1.1.
How can I do? thank you.
Many person give me a idea the com.sun.xml.tree.XmlDocument, but I can't find the class in API document or JAXP1.1's packages. why?
what is it? How can i use it?
thank you very much.

The way to save an XML Document is using a Transformer.
To have access to a transformer use the packages :
import javax.xml.transform.*;
import javax.xml.transform.dom.*;
import javax.xml.transform.stream.*;
Then for saving your Document Object (named dXml) get a Transformer Object with the TransformerFactory Object :
TransformerFactory tf = TransformerFactory.newInstance();
Transformer t = tf.newTransformer();
Now you have got your Transformer Object, to save your Document Object use the method :
Document dXml = getMyDocument(); // this is your Document Object.
OutputStream osSave = getMySaveStream(); // this the OutputStream you need to save your Document.
try
t.transform(new DomSource(dXml), new StreamResult(new OutputStreamWriter(osSave)));
finally
osSave.close();
And your Document was now saved.

Generation of Xml file with java output

Hi i m new to xml and java combination. I have a name value pair kind of output returning from java program. I want to generate the new xml file with the data. Could some one help me out in generating xml file with the data. Could anyone send me the java code that does this task.

Let me know which parser are you using currently for reading xml files so that i assist you. For now, you can refer to STAX Parser API under this link
http://java.sun.com/webservices/docs/1.6/tutorial/doc/SJSXP3.html

Create XML file with worksheet's dynamically assigned through XSLT

Hi all
I have a requirement to create a xml file with worksheets dynamically created based on a field value in the internal table .
I have all my values in internal table, and am calling the transformation from bsp application.
Say the internal table has field dataxyz, for every change in value in this field dataxyz i need to create separate worksheet and populate that sheet with some corresponding values .
please guide me how to create worksheet dynamically.
thanks in advance.
Bharathy
Edited by: elam.bharathy on May 16, 2011 6:51 AM

Can you use a schema when we compose XML doc from Database tables?
Actually, I'm using SQL Server (sorry, wrong forum). But, I thought a Java tool would have a solution for me.

Create xml file with values from context

Hi experts!
I am trying to implement a WD application that will have some input fields, the value of those input fields will be used to create an xml file with a certain format and then sent to a certain application.
Apart from this i want to read an xml file back from the application and then fill some other context nodes with values from the xml file.
Is there any standard used code to do this??
If not how can i do this???
Thanx in advance!!!
P.S. Points will be rewarded to all usefull answers.
Edited by: Armin Reichert on Jun 30, 2008 6:12 PM
Please stop this P.S. nonsense!

Hi,
you need to create three util class for that:-
XMLHandler
XMLParser
XMLBuilder
for example in my XML two tag item will be there e.g. Title and Organizer,and from ur WebDynpro view you need to pass value for the XML tag.
And u need to call buildXML()function of builder class to generate XML, in that i have passed bean object to get the values of tags. you need to set the value in bean from the view ui context.
Code for XMLBuilder:-
Created on Apr 4, 2006
Author-Anish
This class is to created for having function for to build XML
and to get EncodedXML
and to get formated date
package com.idb.events.util;
import java.text.SimpleDateFormat;
import java.util.Date;
import com.idb.events.Event;
public class XMLBuilder {
This attribute represents the XML version
     private static final double VERSION_NUMBER = 1.0;
This attribute represents the encoding
     private static final String ENCODING_TYPE = "UTF-16";
     /*Begin of Function to buildXML
return: String
input: Event
     public String buildXML(Event event) {
          StringBuffer xmlBuilder = new StringBuffer("<?xml version=\"");
          xmlBuilder.append(VERSION_NUMBER);
          xmlBuilder.append("\" encoding=\"");
          xmlBuilder.append(ENCODING_TYPE);
          xmlBuilder.append("\" ?>");
          xmlBuilder.append("<event>");
          xmlBuilder.append(getEncodedXML(event.getTitle(), "title"));
          xmlBuilder.append(getEncodedXML(event.getOrganizer(), "organizer"));
          xmlBuilder.append("</event>");
          return xmlBuilder.toString();
     /End of Function to buildXML/
     /*Begin of Function to get EncodedXML
return: String
input: String,String
     public String getEncodedXML(String xmlString, String tag) {
          StringBuffer begin = new StringBuffer("");
          if ((tag != null) || (!tag.equalsIgnoreCase("null"))) {
               begin.append("<").append(tag).append(">");
               begin.append("<![CDATA[");
               begin.append(xmlString).append("]]>").append("</").append(
                    tag).append(
                    ">");
          return begin.toString();
     /End of Function to get EncodedXML/
     /*Begin of Function to get formated date
return: String
input: Date
     private final String formatDate(Date inputDateStr) {
          String date;
          try {
               SimpleDateFormat simpleDateFormat =
                    new SimpleDateFormat("yyyy-MM-dd");
               date = simpleDateFormat.format(inputDateStr);
          } catch (Exception e) {
               return "";
          return date;
     /End of Function to get formated date/
Code for XMLParser:-
Created on Apr 12, 2006
Author-Anish
This is a parser class
package com.idb.events.util;
import java.io.ByteArrayInputStream;
import java.io.IOException;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.XMLReader;
import com.idb.events.Event;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
public class XMLParser {
Enables namespace functionality in parser
     private final boolean isNameSpaceAware = true;
Enables validation in parser
     private final boolean isValidating = true;
The SAX parser used to parse the xml
     private SAXParser parser;
The XML reader used by the SAX parser
     private XMLReader reader;
This method creates the parser to parse the user details xml.
     private void createParser()
          throws SAXException, ParserConfigurationException {
          // Create a JAXP SAXParserFactory and configure it
          SAXParserFactory saxFactory = SAXParserFactory.newInstance();
          saxFactory.setNamespaceAware(isNameSpaceAware);
          saxFactory.setValidating(isValidating);
          // Create a JAXP SAXParser
          parser = saxFactory.newSAXParser();
          // Get the encapsulated SAX XMLReader
          reader = parser.getXMLReader();
          // Set the ErrorHandler
This method is used to collect the user details.
     public Event getEvent(
          String newsXML,
          XMLHandler xmlHandler,
          IWDMessageManager mgr)
          throws SAXException, ParserConfigurationException, IOException {
          //create the parser, if not already done
          if (parser == null) {
               this.createParser();
          //set the parser handler to extract the
          reader.setErrorHandler(xmlHandler);
          reader.setContentHandler(xmlHandler);
          InputSource source =
               new InputSource(new ByteArrayInputStream(newsXML.getBytes()));
          reader.parse(source);
          //return the results of the parse
          return xmlHandler.getEvent(mgr);
Code for XMLHandler:-
Created on Apr 12, 2006
Author-Anish
This is a parser class
package com.idb.events.util;
import java.io.ByteArrayInputStream;
import java.io.IOException;
import javax.xml.parsers.ParserConfigurationException;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.InputSource;
import org.xml.sax.SAXException;
import org.xml.sax.XMLReader;
import com.idb.events.Event;
Created on Apr 12, 2006
Author-Anish
*This handler class is created to have constant value for variables and function for get events,
    character values for bean variable,
    parsing thr date ......etc
package com.idb.events.util;
import java.sql.Timestamp;
import java.text.SimpleDateFormat;
import java.util.Date;
import java.util.Locale;
import org.xml.sax.Attributes;
import org.xml.sax.SAXException;
import org.xml.sax.SAXParseException;
import org.xml.sax.helpers.DefaultHandler;
import java.util.*;
import com.idb.events.Event;
import com.sap.tc.webdynpro.progmodel.api.IWDMessageManager;
public class XMLHandler extends DefaultHandler {
     private static final String TITLE = "title";
     private static final String ORGANIZER = "organizer";
     IWDMessageManager manager;
     private Event events;
     private String tagName;
     public void setManager(IWDMessageManager mgr) {
          manager = mgr;
This function is created to get events
     public Event getEvent(IWDMessageManager mgr) {
          manager = mgr;
          return this.events;
This function is created to get character for setting values through event's bean setter method
     public void characters(char[] charArray, int startVal, int length)
          throws SAXException {
          String tagValue = new String(charArray, startVal, length);
          if (TITLE.equals(this.tagName)) {
               this.events.setTitle(tagValue);
          if (ORGANIZER.equals(this.tagName)) {
               String orgName = tagValue;
               try {
                    orgName = getOrgName(orgName);
               } catch (Exception ex) {
               this.events.setOrganizer(orgName);
This function is created to parse boolean.
     private final boolean parseBoolean(String inputBooleanStr) {
          boolean b;
          if (inputBooleanStr.equals("true")) {
               b = true;
          } else {
               b = false;
          return b;
This function is used to call the super constructor.
     public void endElement(String uri, String localName, String qName)
          throws SAXException {
          super.endElement(uri, localName, qName);
     /* (non-Javadoc)
@see org.xml.sax.ErrorHandler#fatalError(org.xml.sax.SAXParseException)
This function is used to call the super constructor.
     public void fatalError(SAXParseException e) throws SAXException {
          super.fatalError(e);
This function is created to set the elements base on the tag name.
     public void startElement(
          String uri,
          String localName,
          String qName,
          Attributes attributes)
          throws SAXException {
          this.tagName = localName;
          if (ROOT.equals(tagName)) {
               this.events = new Event();
     public static void main(String a[]) {
          String cntry = "Nigeria";
          XMLHandler xml = new XMLHandler();
          ArrayList engList = new ArrayList();
          engList = xml.getCountries();
          ArrayList arList = xml.getArabicCountries();
          int engIndex = engList.indexOf(cntry);
          System.out.println("engIndex :: " + engIndex);
          String arCntryName = (String) arList.get(engIndex);
          System.out.println(
               ">>>>>>>>>>>>>>>>>>>>" + xml.getArabicCountryName(cntry));
Hope that may help you.
If need any help , you are most welcome.
Regards,
Deepak

Steps in converting a xml file with an rtf template to a pdf

Similar Messages

Maybe you are looking for