Sticky notes not saved - default notes on every start

I could not save my sticky notes.
When I start the Sticky notes, two default nots appear with some description about the application.
I can delete them, add new notes, but after quit and restart the application, the two default notes appear again and the new notes are lost. It seems, that the notes are not saved.
Any idea?
Allready tried: I deleted the plist in ~/Library. --> no success/difference

Same Prob.
I guess this has been the case for the past 4 updates of Leopard.
No solution found yet.
Are there any 'Mac Officials' listening to this?
If not, how do we notify them?
Message was edited by: Saran.

Similar Messages

My Notes from iPhone are not being saved to Notes in Outlook when I sync. How can i get Notes to back up in Outlook?

My Notes from iPhone are not being saved to Notes in Outlook when i sync. How can I get Notes to back up in Outlook?

I have iPhone 4S

ITunes library could not be saved. Not enough memory

I just began to get the dreaded "iTunes Library could not be saved. Not enough memory" error after downloading a concert DVD. I have 8 GB RAM and 1.54 TB of hard drive space available. I am running Win 8.1 and iTunes 11.4.0.18 which iTunes says is the latest version. Closing and restarting iTunes makes no difference. Shutting down all other applications makes no difference. Any ideas???

Might be something here that will help > iTunes Store: "Error (-50)" when downloading purchased content

"Allow AutoFill even for websites that request passwords not be saved." not appearing in Safari 7.0.3 prefs

A December 2, 2013 Apple FAQ says that you can go to Mavericks:Safari:Preferences:Passwords and select "Allow AutoFill even for websites that request passwords not be saved."
However, this checkbox does not appear.
The features and management of iCloud Keychain are causing concern among users.
I share these. For example, today I chose to let Safari produce a complex password for a Chase credit card site. Yet, when I went back to that site to sign in, I could not. Nor was that password in the list on Safari!
This is not good. For iCloud Keychain to be trusted, it must be very reliable, and we must be allowed to manage it.
I was forced to reset the password for Chase, and had to refuse Safari's offer to use their suggested password (as I would possibly never see it again!)

Safari version 7.0.4
That option is no more available.

Custom fields in Source of Supply screen - not getting saved

Hello Experts,
There is a requirement to create 2 customizing fields on Souce of Supply (SOS) screen of Shopping Cart in SRM7.0 and has to be updated in the Backend system (PR,PO etc).
I have created CUST1 and CUST2 in the standard include - INCL_EEW_PD_PARTNER_CSF (Customer Enhancements to Partner in Doc.) which is being used in the structure /SAPSRM/S_CLL_WD_SUPPLIER (CLL structure for SOS).
But while creating Shopping cart, these customizing fields are not getting saved and not transfered to backend.
NOTE:
1. I refered SAP Note - 672960 , but it has no information abt SOS enhancement.
2. I have enhanced the backed system accordingly to show these 2 customizing fields in PR and PO.
3. Webdynpro component for SOS screen is - /SAPSRM/WDC_DODC_SC_I_SOS, and the structure used is /SAPSRM/S_CLL_WD_SUPPLIER.
Awaiting the correct answer from you all
Thanks and Regards,
Prabhu

Hello All,
I'm facing exact same problem.
Steps followed:
1. Configuration from SPRO
Supplier Relationship Management -> SRM Server -> Cross-Application Basic Settings -> Extension and Field Control -> Configure Customer Fields -> Define Customer fields on item Level -> Append for Customer Fields on Shopping Cart Item
2. Add new fields in Webdynpro: /SAPSRM/WDC_DODC_SC_I_SOS
View:V_DODC_SC_I_VENDOR
Still i'm not able to get proper results.
Please help.
Thanks in advance.
Yogesh

Default credentials not being saved in Hyper-V Manager for a single VM

Greetings,
I have a Server 2008 R2 SP1 Standard Hyper-V box running about 8 virtual machines on it. The machine is joined to a 2008 domain.
Recently, I moved the .VHD file for a single machine from one folder to another folder. After doing so, when I connect to ONLY that specific machine via Hyper-V manager, I receive the error: "Your credentials did not work. Your system administrator
does not allow the use of default credentials to log on to the remote computer XXXXXX because its identity is not fully verified. Please enter new credentials."
I have the "Use default credentials automatically (no prompt)" option checked in the Hyper-V settings, and I have tried checking and unchecking this box and saving multiple times. I have also deleted the saved credentials and the system reports no
saved credentials.
I have attempted to change settings in the group policy (gpedit.msc) regarding enabling the Local Computer Policy > Computer Configuration > Administrative Templates > System > Credentials Delegation > Allow Delegating Saved Credentials with
NTLM-only Server Authenticaton setting, something I found in older blog posts here in the Hyper-V forum and on other websites, and it has not made any difference.
At this point, I can only assume this must be some sort of bug because I cannot identify any other possible solution for getting rid of this annoying Windows Security pop-up box. There are no entries in the Windows event log that indicate anything
odd. When I enter the correct username/password, I can still access the VM, but the credentials are never remembered, and ONLY for this single VM.
Does anybody have any knowledge of how to fix this issue? I can't believe that just moving a VHD caused all these problems.
Thanks!

Ah, finally found a solution! I cannot explain why this suddenly got changed other than to assume it must have had something to do with a recent Windows Update or me trying to install Remote Desktop Services and Network Policy and Access Services.
I roughly followed the directions from
KB954357 or this
older post on the Hyper-V forum.
FIX:
1) Run gpedit.msc on the Hyper-V host that exhibits the problem.
2) Enable the policy setting Local Computer Policy > Computer Configuration > Administrative Templates > System > Credentials Delegation > Allow Delegating Default Credentials with NTLM-only Server Authentication. Click the Show... button
next to "Add Servers to the list", and add the value "Microsoft Virtual Console Service/*" without the double quotes. Click OK. Click OK again to exit the dialog box.
3) Run a command prompt and execute gpupdate /force to refresh the group policy.
4) Now try to log into a machine in Hyper-V manager with default credentials enabled, and note that you are not prompted.
Again, I don't know why I had to do this, but it's working fine now.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

I've tried to d/l itunes 3 times and every time I get this message: .....Downloads\iTunesSetup.exe.part could not be saved, because the source file could not be read. I have no idea what I'm doing. Does anyone have any ideas to help? Cheers.

Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the

Adobe Acrobat Pro XI 11.0.06 when I reduce file size or try to optimize, I get this error: The document could not be saved. A number is out of range. I do the exact same thing every month and it works. I did it a few days ago and it worked. I receated the pdf, I renamed it. tried to do it before I imported more pages. no go. the 16 mg pdf will normally reduce to 5 or 6

Hi,
Are you facing the issue with any pdf file?
Please try updating Acrobat to 11.0.7 and check.
You might also want to repair Acrobat and see.
Regards,
Rave

My iMessage does not appear to be working. Every time I go to reply to an existing message it just appears as normal text. I have tried to create a new message but it still just defaults to normal messages. I have checked my settings but looks ok. Help?

My iMessage does not appear to be working. Every time I go to reply to an existing message it just appears as normal text. I have tried to create a new message but it still just defaults to normal messages. I have checked my settings but it is all set up as it should be. Is there anything I've missed or could try? Thanks

Try the following:
In Finder, select the problematic volume and then press command-I.
Expand the Sharing & permissions section if it's collapsed.
If the section is locked, then unlock it by pressing the padlock button and then authenticating as directed.
Tick/check Ignore ownership on this volume.

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Load remote images in html mail setting does not get saved. I have to turn it off every time I log in. Is this a bug?

Plug your phone into the wall charger for at least 30 minutes...make sure you have a sim card in the phone...then:
Leave the USB cable connected to your computer, but NOT your phone, iTunes running, press & hold the home button while connecting the USB cable to your dock connector, continue holding the home button until you see “Connect to iTunes” on the screen. You may now release the home button. iTunes should now display that it has detected your phone in recovery mode, if not quit and reopen iTunes. If you still don’t see the recovery message repeat these steps again. iTunes will give you the option to restore from a backup or set up as new.
Make sure you have no anti-virus software running or any firewalls...turn all of that stuff off.

Recently, my passwords on many websites are not being saved, forcing me to log in every 15 minutes or so. Is anyone else experiencing this? I am wondering if it is a result of a "bad" update?

For the past few weeks, I have noticed that passwords on many different websites are not being saved. I literally have to log back into each page every 15 minutes or so. Is this the result of a bad software update? Have an appointment at the Genius Bar tomorrow but if this can be resolved without going in, it would be preferred.

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

Acrobat Standard Ver. 7 Not saving Default preferences.

Seeking help on why Acrobat Standard Ver. 7 Not saving Default preferences. Specifically, the zoom level. It always reverts back to something other than the 100% I set it at. The operating systerm is Windows 7, Pro if that helps.

As I recall, you are the first person who has reported even getting AA7 to work in Win7. Any operations with that combination are likely to work with luck. I assume you mean the preferences set under the edit menu. You might try changing AA7 to run in compatibility mode and see if that does the job.

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

Hi every one if i connect wired headset to my new iPad it is not showing a headphone connected symbol .is it by default not visible or something happen thanks in advance

When you have kernel panics, the pertinent information is in the panic report.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the Console window, select
DIAGNOSTIC AND USAGE INFORMATION ▹ System Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar.
There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of reports. A panic report has a name that begins with "Kernel" and ends in ".panic". Select the most recent one. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
If you don't see any reports listed, but you know there was a panic, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report.
I know the report is long, maybe several hundred lines. Please post all of it anyway.

While Creation Of SaleOrder Char Values are not getting saved.(V C)

Hi SAP gurus,
One of my client can able to create a saleorder but when we go and see in VA03 Display mode,we found Charactrestic values getting miised out.What could be the probale reasons.
Note: I Have stimulate the required combination as per my client requirement in CU50,here i can able to indentify the Green Sign,but While Creation Of SaleOrder Char Values are not getting saved.
Awaiting for your valuable reply.
Cheers,
Kumar.S

Kumar ,
If you assign values in classification view or configuration profile they will become default for the product, and it willnot be changed in sales order.
another thing if the item category is incorrect you will not get the configuration pop up at all .
problem what i understand from your thred is at the time of sales ordeer creation there is some inconsistances in the configuration , may be some condition is not fullfilling.
If in CU50 the result shown are error free, same configuration should owrk properly in sales configuration process, please again try to create it in sales order with same value assignment also check all the messages.
see the result of configuration before saving the sales order , i hoep it will work for you.
I am assuming all the things from SD are properly configured ie item catageory, varient pricing etc.
Check and revert back.
Regards
Ritesh

Photoshop CC 2014 - The file can not be saved in path because an error has occurred

Hello,
I need again help regarding this issue. Sometimes but very often I receive an error, trying to save a PSD file, the error is: "The file can not be saved in <path> because an error has occurred". After that it is not possible to save the file in any format, using save or save in dialog. The only way to rescue the result is, to save for web as an jpeg. This error occours often using Topaz or NIK filter and until now only in PS-CC 2014. My workflow looks like this:
- Open NEF RAW file in Brdige
- Settings in ACR and give it into PS by clicking OK in ACR
- In PS doing a adjust some levels
- press SHIFT+STRG+ALT+E for a new summary layer
- Uing Topaz Adjust on the new level with 65% opacity
- press SHIFT+STRG+ALT+E for a new summary layer
- Using Topaz DeNoise on the new layer
- pres STRG+i and resize the image to 1200x797
- Using Topaz InFocus on the same layer as DeNoise
- create a vignette with brightness adjustlayer
After this workflow in nearly 90% it is not possible to save the file as PSD or something else, only to save for web as JPG. If I save the file after opening the RAW in PS and after every layer with Topaz Filter, I can save the file when I am done. Same issue occurs using NIK Filters in that way.
I tried to optimize the performance by using this guide: http://helpx.adobe.com/photoshop/kb/optimize-performance-photoshop-cs4-cs5.html doesn’t solve the issue.
I re- and installed all Adobe Products more than three times, doesn't solve the issu.
After that I ordered a new SSD drive and insall Windows 7 64bit inkl. All latest hotfixes, patches and drivers. I downloaded the newest Adobe Versions and the newest filter sets from Topaz and NIK. Doesn’t solve the issue.
This is my rig:
Gigabyte Z87X-UD4H mainboard
Intel Core i7 4770k
32GB Corsair RAM
250GB Samsung 840 Evo SSD Drive
nVidia Geforce GTX770
During my tests I took the same RAW File and created nearly 20 adjustment layers and summary layers, without using Topaz or NIK filters. No problem, I was able to save the file as PSD file.
From my point of view, actually, the error occurs only when I am using Topaz or NIK filters. Both supports doesn’t know the issue and if I search the web, I can’t find more then me. It seemed to depend on my settings, my rig or something else, perhaps a cache is overflowed or something like this. Adobe telephone support can’t help because I said I use a third party filter. But it occurs with two different manufactures…
So please guys, help me to figure out why this error occurs in my system.
Thanks in Advance and best regards,
Michael

Update: I tried several times to reproduce the error, actually it dosen't occur. I changed nothing on my system, without reboot it twice. This is what I said in my beginning times: it occurs sometimes but often. I will keep you up to date.

Sticky notes not saved - default notes on every start

Similar Messages

Maybe you are looking for