Strange Problem (easy - I hope)

Im amending a report due to an increase in the value of one column within the report. The values now total over a billion pounds and as a result the column needed widening to show the total.
It turned out to be the Format Mask restricting the column. I have changed this to allow the column total to be displayed (when the report is ran from reports builder)
However when compiled and ran standalone, the column still isn't displayed.
Any ideas? Do the columns widen when a report is ran standalone?
Cheers

Hi
Does your column appear all asterisk? Reports does it for columns that are not wide enough to display the value. Try increasing the width of the field object that displays the affected column. See if you can "safely" use the Horizontal Elasticity=Expand property of the field object.
Regards
Sripathy

Similar Messages

Strange problem with forms. browser does not send syn

We are having a strange problem and I hope someone can help (im
stumped).
setup
I have a webserver (iplanet 4.1 sp8) running in secure mode. It has a
weblogic nsapi plugin and forwards EVERYTHING over to an app server.
The app server runs weblogic 4.5 sp10 and hosts both servlets and
static html for an application we are developing.
customers load a long form and are given the ability to upload several
files, but upon pressing the submit button on the form (they must do
each file individually) we get an error message that the page cannot
be displayed.
upon investigation, I look at a tcp trace and find that when the
submit button is pressed, the browser sends an ack packet to the
netscape server and it responds (correctly IMO) with a rst flag.
Why doesn't the browser start communication with a syn/syn-ack/ack
sequence? The form appears to have been completely loaded.
To aggravate matters more, this problem does not always occur and
clearing the browser's cache seems to aggravate it.
I would appreciate ANY help that could be offered.
sorry for the long post,
-Chris
Chris Regenye
Supervisor Systems Services
PR Newswire
[email protected]

In article <[email protected]>,
Chris Regenye <[email protected]> wrote:
Barry Margolin <[email protected]> wrote in message
news:<vzdh7.8$5%1.649@burlma1-snr2>...
In article <[email protected]>,
Chris Regenye <[email protected]> wrote:
We are having a strange problem and I hope someone can help (im
stumped).
setup
I have a webserver (iplanet 4.1 sp8) running in secure mode. It has a
weblogic nsapi plugin and forwards EVERYTHING over to an app server.
The app server runs weblogic 4.5 sp10 and hosts both servlets and
static html for an application we are developing.
customers load a long form and are given the ability to upload several
files, but upon pressing the submit button on the form (they must do
each file individually) we get an error message that the page cannot
be displayed.
upon investigation, I look at a tcp trace and find that when the
submit button is pressed, the browser sends an ack packet to the
netscape server and it responds (correctly IMO) with a rst flag.
Why doesn't the browser start communication with a syn/syn-ack/ack
sequence? The form appears to have been completely loaded.It may be trying to reuse a persistent connection, as recommended in
HTTP/1.1.Great, but the server obviously doesn't believe this is the case. Any
idea how to correct this situation? also... as I mentioned this
problem is intermittant(sp?). When it does not occur, tcp
communications are normal.It sounds like the bug is in the browser. When it gets the RST, it should
realize that the old connection has been dropped (even if a server
implements persistent connections, like it should, it's allowed to close
idle connections after a timeout or if it's running out of resources).
When that happens it should automatically retry on a new connection.
This might explain why the problem is intermittent. The browser is happy
when the connection has remained open, but it doesn't handle the occasional
cases where the server has closed the connection unexpectedly.
Barry Margolin, [email protected]
Genuity, Woburn, MA
*** DON'T SEND TECHNICAL QUESTIONS DIRECTLY TO ME, post them to newsgroups.
Please DON'T copy followups to me -- I'll assume it wasn't posted to the group.

Creative zen : vision M 30gb strange problem

,Creative zen : vision M 30gb strange problem. Hi people,
My mp3 player is 2 and a half years old. A few months ago he didn't charge anymore. ?I thought i could repair it by buying a new battery and install him in my mp3.
Afther a few ours of ?assembling it was ready for charging a thought..
I used the usb charger and de sync adapter...
the morning after, my mp3 is not charged and only showing me a little red stripe in de battery (right top) i can listen music but only for a few minutes...
Also my PC does noet see my MP3
tested on :
windows xp service pack 3?
vista?
windows 7?
please help me
Stijn van Vilsteren?
DUTCH?
i am sorry for my pore english !

Squipy wrote:
Hi, I stopped using this MP3 for about 2 or so years because I bought a new one. I decided to start using it again and downloaded all the required software but as soon as I unplugged the MP3 from the power outlet, the player died. I can't get it to start up without plugging it into a power outlet. I think it has rechargable battery? Why didn't it recharge itself?
My second enquiry is about the capacity of the player. When my player was empty, I went into "Information" and it said Total Space: 28GB and Free Space: 2GB. Why is free space only 2GB? Shouldn't it be 28 as well?
Thanks in advance!
The battery will only last about 3yrs regardless of use.You will need to change it. Did you scroll down to see the album,picture,track counts? Did you partition part of the dri've for removable storage. You can find instructions to open here ? http://www.youtube.com/watch?v=_Drkr...e=channel_page & ? the battery here(very easy to do) http://cgi.ebay.com/Original-Creative-ZEN-Vision-M-30gb-Battery-LPCS285385_W0QQitemZ400028645679QQcmdZViewItemQQpt ZOther_MP3_Player_Accessories?hash=item40002864567 9&_trksid=p39.c0.m4&_trkparms=72%3A205|66%3A4|65%3 A2|39%3A|240%3A38|30%3A0|293%3A|294%3A200

Strange problems with Windows 7 running on Bootcamp

Hi there. I have just installed Windows 7 using Bootcamp on my Macbook with Leopard. I have a few strange problems and just wanted to see if I could gain any help or see if anyone else is experiencing these problems. Apart from those, its running great :P
Main one is when I close the macbook shut, then open it back up the screen stays black, i can hear it open back up but its like it just stays in Sleep mode. I then need to hold down the power button and switch it back on.
Secondly when I use the down, up left or right arrow button to scroll down in the respective direction the cursor is moving around like it would on a word document. It will scroll down eventually but only becuase the cursor has reached the end of the page.
Thanks for your time and I really hope someone can shed some light.

Hey, I'm having this issue too, however I also get freezes while the screen is still on, or while the screen power saves, and will not resume.
The computer stays on, and warm, meaning it never powers off, nor realizes its hung-up, and the only way to get back to work is a hard shutdown and reboot.
Details are below, and x64 Win 7 MSDNAA RTM Build 7600 - 4gb of Corsair 4-4-4-12 2x2 ram.
I have already gotten the newest commercial nVidea drivers and I am running RivaTuner with appropriate settings, and I have disabled the Wired NIC, and turned off the wireless NIC power-saving settings.

Strange problem in applet application

Hello Everybody,
I hava an applet whit an image. This image has to changed by color, and text has to be added to the image. The text color is also changable. Here is where it goes wrong.
When I change the background color of the applet, the transparant image will be colored. This is good.
At the start text can be added.
When you change the textcolor, the frame with the JColorChooser will get at the background of the image, like this:
[http://schaftwagen.ncamade.nl/schaftwagenfout.png|http://schaftwagen.ncamade.nl/schaftwagenfout.png] (image)
When you change the text with the "opschrift" button (vertical text) the old text stays under the new text.
When you change the background after this, everything seems to be okay.
At an other forum I've asked this question, and some of that people didn't had this "problem". I am using Windows 7RC with the newest java version. Tested it on an Windows vista and Windows XP all with the same problem.
The source is to big for this forum and can be found at [http://www.dreamincode.net/forums/showtopic117029.htm|http://www.dreamincode.net/forums/showtopic117029.htm]. This is the other forum, where I've asked about his issue. (I hope this link isn't against the rules to post this link to the other forum?)
I hope someone can help me with this problem. The applet can be tested here: [http://schaftwagen.ncamade.nl/colorchooser.asp|http://schaftwagen.ncamade.nl/colorchooser.asp]
Greats,
C.H.F.S.
Edited by: C.H.F.S. on Jul 28, 2009 4:01 AM

I've just tested it on different boxes, and sometimes it does work indeed, but sometimes other problems come up. On one the background color doesn't change but the text color does it right and changing the text work also correctly in that case.
Can anyone help me please solving this strange problem?

Strange problem with my ipod 2g after upgrade to os 4.2

Strange problem with my ipod 2g after upgrade to os 4.2
the problem with volume some times when i switch on the ipod i hear the sound
alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
i hope i get help

I would try in order:
- Reset the iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.
- Restore the iPod from backu via iTunes.
- Restore the iPod to factory defaults/new iPod.

Audigy Player: Strange problem w/ internal inp

Hello everybody!
Since I'm running WinXP Pro I've encountered a really strange problem with my internal inputs. I have a DVB-s card connected and cannot hear any sound. Currently I have to use the external output of the DVB-card and the external Line In of the Audigy - quite sloppy! The thing is, all worked fine using Win98. And - I can record sound from DVB but not listen to it simultaneously! This works (...) for all internal inputs, ie. CD, TAD, etc. I tried almost every driver I could get my hands on, but it didn't help.
Any help would be appreciated.
Greetings from Germany,
Lasse

Hello!!!!
I have the Ms-8348a ......is not big diference between them i think....for the beginig you need to know that this drive is the pourest cd-rom i ever see........The read of the cd's is the badest thing at this unit.......I recomend you to buy a separate cd-rom like Asus,Pioneer,Lg anyway one of the brands and no SONY (is not so good)......With the burning you will not have big problems it will work almost with all cd-blank brands....but with the reading of these cd's is other problem.....you will want to use this unit only for writting not for reading.....If you have WinXP you will have a problem with this unit with a limit speed of writing at 16x.....read my detailed post 'MS-8348a problems and SOLUTION!!!!'.......Here is the link with the latest firmware for the (MAKE SURE IS THE 'A' VERSION BEFORE FLASHING!!!!!!).........http://www.cdfreaks.com/drive/firmware/799...hope it help

Strange problem with WD component build

Hi all,
I have strange problem with building one wd component, which is part of SC. I'm getting few errors which stops me from building component (and transporting to other systems via CMS of course). I'm providing sample of the errors (3 types) and ant error:
[code]     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute startDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.RequisitionFoCust --> ContextValueAttribute stopDate [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_NAME_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SuppMatGroupView --> TextView MATERIAL_GROUP_ID_editor [text]: Context element and property are not compatible
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextModelNode SuppMatGroup [modelClass]: The context model node has not been bound to a model class (Hint: A Context model node has to be bound to a model class or mapped to a model node of another controller.)
     [wdgen] [Error]   com.gbs.gmob.SupplierCust --> ContextValueAttribute material_group_list [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
     [wdgen] [Warning] com.gbs.gmob.ApprovalRejectView --> TextEdit TextEdit: UIElement does not have a label
     [wdgen] [Info]    Catching throwable null
     [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:153)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2050)
     [wdgen]      at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1299)
     [wdgen]      at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:175)
     [wdgen]      at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:219)
     [wdgen]      at org.apache.tools.ant.Task.perform(Task.java:341)
     [wdgen]      at org.apache.tools.ant.Target.execute(Target.java:309)
     [wdgen]      at org.apache.tools.ant.Target.performTasks(Target.java:336)
     [wdgen]      at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
     [wdgen]      at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
     [wdgen]      at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:225)
     [wdgen]      at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:201)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     [wdgen]      at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     [wdgen]      at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     [wdgen]      at java.lang.reflect.Method.invoke(Method.java:324)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
     [wdgen]      at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:354)
     [wdgen]      at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:176)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
     [wdgen]      at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:5559)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.buildDCsForDevConfig(BuildAction.java:307)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction.access$200(BuildAction.java:58)
     [wdgen]      at com.sap.ide.eclipse.component.provider.actions.dcproject.BuildAction$1.run(BuildAction.java:212)
     [wdgen]      at org.eclipse.jface.operation.ModalContext$ModalContextThread.run(ModalContext.java:101)
     [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
     [wdgen] ERROR: Generation failed due to errors (6 seconds)
Ant runtime 9.234 seconds
Ant build finished with ERRORS
[Error]   Generation failed!
Error: Build stopped due to an error: [Error]   Generation failed!
[/code]
Strange is that if I try to rebuild and deploy locally, no errors occurs and I can normally deploy and run application manually!
Does anyone have experience with this problem?
Thanks in advance!
Regards,
Ivan

Hi Ivan
I have faced this problem earlier BUT ultimately I have to create the DC from scratch.
But you can check these things:
1.Have you copy/pasted Dictionary type from other location (check the path of the dictionary types ) --> If yes then deleted that and create again(do not use copy/paste)
2.This also happens if your "Used DC" has some problems in the JDI --> Remove the used DC and add it again.
3.Make sure the NWDI infastructure is perfect- this may be a cause.
4. Check Context mappings --> delete all mappings > save metadata > Create again.
5. Delete the model and recreate it again.
6.If you have done reimporting model make sure to restart J2EE instance.
Hope this solves the problem - if not please post
Regards
Ananda

A strang problem about Resin database connection pool

I am a beginner，hope somebody can help me.
my web site occured a strange problem after I used the Resin database connection pool instead of
connecting directly
the error message as follows:java.lang.IllegalArgumentException: Request cannot be null
at javax.servlet.ServletRequestWrapper.<init>(ServletRequestWrapper.java:100)
at javax.servlet.http.HttpServletRequestWrapper.<init>(HttpServletRequestWrapper.java:92)
at com.caucho.server.connection.RequestAdapter.<init>(RequestAdapter.java:96)
at com.caucho.server.webapp.DispatchRequest.<init>(DispatchRequest.java:97)
at com.caucho.server.webapp.IncludeDispatchRequest.<init>(IncludeDispatchRequest.java:77)
at com.caucho.server.webapp.IncludeDispatchRequest.createDispatch(IncludeDispatchRequest.java:87)
at com.caucho.server.webapp.RequestDispatcherImpl.include(RequestDispatcherImpl.java:389)
at com.caucho.server.webapp.RequestDispatcherImpl.include(RequestDispatcherImpl.java:345)
at com.caucho.jsp.PageContextImpl.include(PageContextImpl.java:807)
at _jsp._intro__jsp._jspService(/intro.jsp:60)
at com.caucho.jsp.JavaPage.service(JavaPage.java:75)
at com.caucho.jsp.Page.pageservice(Page.java:571)
at com.caucho.server.dispatch.PageFilterChain.doFilter(PageFilterChain.java:155)
at com.caucho.server.cache.CacheFilterChain.doFilter(CacheFilterChain.java:211)
at com.caucho.server.webapp.WebAppFilterChain.doFilter(WebAppFilterChain.java:177)
at com.caucho.server.dispatch.ServletInvocation.service(ServletInvocation.java:221)
at com.caucho.server.http.HttpRequest.handleRequest(HttpRequest.java:263)
at com.caucho.server.port.TcpConnection.run(TcpConnection.java:331)
at com.caucho.util.ThreadPool.runTasks(ThreadPool.java:464)
at com.caucho.util.ThreadPool.run(ThreadPool.java:408)
at java.lang.Thread.run(Thread.java:595)


<resin xmlns="http://caucho.com/ns/resin"
xmlns:resin="http://caucho.com/ns/resin/core">

<log name='' level='info' path='stdout:' timestamp='[%H:%M:%S.%s] '/>
<log name='com.caucho.java' level='config' path='stdout:'
timestamp='[%H:%M:%S.%s] '/>
<log name='com.caucho.loader' level='config' path='stdout:'
timestamp='[%H:%M:%S.%s] '/>

<dependency-check-interval>2s</dependency-check-interval>

<javac compiler="internal" args=""/>



<thread-pool>

<thread-max>128</thread-max>

<spare-thread-min>25</spare-thread-min>
</thread-pool>

<min-free-memory>1M</min-free-memory>
<server>

<class-loader>
<tree-loader path="$resin-home/lib"/>
</class-loader>

<keepalive-max>500</keepalive-max>
<keepalive-timeout>120s</keepalive-timeout>

<http server-id="" host="*" port="8080"/>


<cluster>
<srun server-id="" host="127.0.0.1" port="6802" index="1"/>
</cluster>

<ignore-client-disconnect>true</ignore-client-disconnect>

<cache path="cache" memory-size="10M"/>

<ping>

</ping>

<web-app-default>

<cache-mapping url-pattern="/" expires="5s"/>
<cache-mapping url-pattern="*.gif" expires="60s"/>
<cache-mapping url-pattern="*.jpg" expires="60s"/>

<servlet servlet-name="directory"
servlet-class="com.caucho.servlets.DirectoryServlet"/>
</web-app-default>

<database>
<jndi-name>jdbc/artunion</jndi-name>
<driver type="org.gjt.mm.mysql.Driver">
<url>jdbc:mysql://localhost:3306/union</url>
<user>as</user>
<password>as</password>
</driver>
<prepared-statement-cache-size>8</prepared-statement-cache-size>
<max-connections>20</max-connections>
<max-idle-time>30s</max-idle-time>
</database>

<host-default>
<class-loader>
<compiling-loader path='webapps/WEB-INF/classes'/>
<library-loader path='webapps/WEB-INF/lib'/>
</class-loader>

<access-log path='logs/access.log'
format='%h %l %u %t "%r" %s %b "%{Referer}i" "%{User-Agent}i"'
rollover-period='1W'/>

<web-app-deploy path='webapps'/>

<ear-deploy path='deploy'>
<ear-default>

</ear-default>
</ear-deploy>

<resource-deploy path='deploy'/>

<web-app-deploy path='deploy'/>
</host-default>

<resin:import path="${resinHome}/conf/app-default.xml"/>

<host id=''>
<document-directory>D:/artunion</document-directory>

<web-app id='/'>

<class-loader>
<simple-loader path="$host-root/xsl"/>
</class-loader>
<servlet-mapping url-pattern="/servlet/*" servlet-name="invoker"/>
</web-app>
</host>
</server>
</resin>
Thank you!

A strange problem in smart form?

Hi,
   I met a strange problem in my smart form. When I click "Check" button in each window of each page, system said "Window (my window name) does not fit onto page(height)". Even I create a new page and a new window in it, it still said this error when I click "Check" button in the new window.
   I have tried to enlarge or reduce the window's size, but this error still occured. But I can activate the form correctly. And there is a syntax error in the generated program:
   FORM %EV2.
    LOOP AT INTO .
    CALL FUNCTION 'SSFCOMP_TABLE_ROW_BEGIN'
    EXPORTING I_LINE_TYPE = 'LINE2'
You can see there's an error in loop statement.
Could you tell me the reason and how to solve it?
Thanks a lot!

hi
good
as you have maneioned in your error you have said that you have created your own window,but the check box as you mentioned which check box that it it is output options tab check box or in the condition tab check box.
in the general attribute select the secondary window from the dropdown box and output options tab select the page size as you need .
i hope you will get some output .
thanks
mrutyun

Web Service Strange problem

Hi
I have the following strange problem while calling a
web-service that is bind to a data grid on a popup container:
When I’m calling the web service using the popup
container automatic event (i.e. show, creation-completed, activate,
etc) the structure returned from the web service is an [Object
Proxy] type that needs to be decipher…
Changing the logic and calling the same web service by a user
interface action (click etc), returns an ArrayCollection Object.
The question is actually what is the difference between an
automatic and a user action?
Should there be such a difference?

Hi
Again you are trying to add an empty line and then delete it. Well what i am saying is you dont have to do the lines
complex.addRETURN(new ComplexType_BAPIRET2());
complex.addUSERLIST(new ComplexType_BAPIUSNAME());
ComplexType_BAPIUSSEXP d1 = new ComplexType_BAPIUSSEXP();
complex.addSELECTION_EXP(d1);
ComplexType_BAPIUSSRGE d2 = new ComplexType_BAPIUSSRGE();
complex.addSELECTION_RANGE(d2);
complex.removeSELECTION_EXP(d1);
complex.removeSELECTION_RANGE(d2);
input.setParameters(complex);
Just write the following code and you are good to go.
Bapi_User_Getlist_Input complex = new Bapi_User_Getlist_Input();
wdContext.nodeBapi_User_Getlist_Input().bind(complex);
complex.setMax_Rows(10);
complex.setWith_Username("X");
try
wdContext.currentBapi_User_Getlist_InputElement().modelObject().execute();
catch(Exception e)
wdComponentAPI.getMessageManager().reportException ("Exception occured "+e,true);
Hope that helps you. You dont have to pass any values to the table structures. This specific bapi does not require data to be passed to the structures and by doing so empty lines are added and that is what i was saying when i explained in my previous post. Hope that clarifies your doubt. Do let me know in case u require further clarifications.
If you are getting a error saying Return and Selection_EXP are required check the mapping.
It is enough if you just select the nodes under
   Bapi_User_List_Input
      |_Output
      |    |_Return (Model Node)
      |    |_Selection_Exp (Model Node)
      |    |_Selection_Range (Model Node)
      |    |_Userlist (Model Node)
      |    |_Rows (Model Attribute)
      |_Max_Rows (Model Attribute)
      |_With_Username (Model Attribute)
and of course select the Model Attributes MAX_ROWS and With_Username
Let me know if you require any more information
regards
ravi

Strange Problem - Cluster of References

Hello guys
I had a strange problems using a cluster with references.
How to reproduce the problem:
- open a blank VI;
- create two graphs in the front panel;
- in the block diagram, create references for both graphs;
- connect these references to a bundle (not bundle by name);
- create an indicator for the bundle;
- run the VI once;
- right click on the bundle indicator and change it to a control;
- delete references and bundle;
- select the control in the front panel, go to EDIT, CUSTOMIZE CONTROL;
- change to strict type def;
- save this control as Control1.ctl;
- connect the control to a unbundle by name;
- right click on the unbundle by name and select one of the two graphs as an item (doesn't matter which one you select);
- create a property node and feed its reference terminal with the reference from the unbundle by name;
- use the property "Label.Text" in the property node;
- create an indicator for the the property node;
- run the VI;
- the indicator will show the correct label for that graph;
- perfect!!!
If you save the VI and run it again, everything is fine.
But............... if you close it, open again and run.... you will get an error 1055 "Object reference is invalid".
Why it was working before closing?
Find attached the VI and the Control.
Thanks
Dan07
Solved!
Go to Solution.
Attachments:
Cluster References.vi ‏11 KB
Control1.ctl ‏7 KB

Let see if I can answer before I have to start working.
Do a quick experiment.
Use a Type cast to cast your ref as a U32 and show that value on the FP.
Save the VI run it and record the number on the FP.
Mod the vi save it clsoe it open it and run again. The number should have changed.
That is the issue you facing, the ref number changes so you need one that is valid when you run.
How I do it;
I use an Action Engine (see this Nugget to learn what an Action Engine is) that servse as a GUI controller and lets me get at refs where even I need them. The following is a case study.
First I collect all of th refs I will need and bundle them in a type def. I sue a state machine to do the bundling if there are a lot.
THe bundled clsuter get passed to an GUI Controller Action Engine
Inside the Init I check the refs to make sure they are vlid. THis has saved a lot of wated time chasing invalid refs.
If they were valid I cache the refs.
For major mode changes that demand a lot of GUI punching I create sub-VI to do the dirty work.
When ever other codes needs a ref to the GUI I have a method that returns the refs.
THe following shows another VI using those GUI refs.
I hope that helps,
Ben
Ben Rayner
I am currently active on.. MainStream Preppers
Rayner's Ridge is under construction

Strange problem in executing procedure using dblink

I have this strange problem coming in the execution of a procedure accessed using dblink. I will try to explain the scenario. We have one procedure in our schema which is executed using a dblink from another database as we have a integration of systems. This was working fine but after we did a fresh export and import of this schema as we migrated our database to a new better configuration DB server, the execution of this procedure is hanging when it is executed from the dblink from the other database. I hope, I have been able to explain the scenario.
I hope, my question is clear.
Please, help in solving the doubt.
regards

No starting version number.
No current version number.
No indication of whether the link is valid and you can SELECT across it.
No error message of any kind.
Nothing from your alert log.
No indication of whether you have a global names issue.
Please do the research required to identify the nature of the problem, check the related docs at metalink, and if you still have a problem give us the rest of the story.
Then perhaps we can help you.

Really strange problems by sending mail.

Hello.
I have a strange problem with apple Mail.
Sometimes, pushing the Sent-Button causes in a loss mail.
The new written mail disappears. nothing is in the Drafts or Sent-Massages
an no mail is sent. No Apple-Sount appears. Nothing.
I have a xserve with Mac OS X 10.5.8 as Mailserver and Apple Mail V3.2.
I hope, that someone can help me.
Best regards
Ornaminer

Hello.
Here is my third update.
I tried to delete the "com.apple.mail.plist"
and the file "mail" in "user/Library/"
but there are still the same problems.
Best Regards
Ornaminer

Strange problem with desktop

Hi, I have a very strange problem with desktops and dashboards something else. For example, when I am on desktop 2 and i go to desktop 1, when I click with the mouse on it, it goes again to desktop 2. or when I am on desktop 1 and I go to ddashboard, it returns again to desktop 1 when i click to something in the dashboard.
but, if i am on desktop 3, and i go to desktop 1 throguh desktop 2, there is no problem. the same if i go from desktop 2 to dashboard.
I hope i've been clear enough to let you understand this... explanation =P
Anyone can help?

My system has started "freezing". Actually, usually when I'm browsing the net, Chromium stops loading pages. Conky stops updating, and usually I can't switch to another programs. I can't start xkill from menu, menu opens but nothing starts. If I run "ls" etc in Terminal, nothing happens
I can however control+alt+F1 to CLI, but if I try to login nothing happens.If doesn't help even if I kill X (I started it with startx). And if I don't kill X, I can't go back from CLI with control+alt+F7, there's just a black screen.
I'm using Nvidia drivers also, and XFCE4. This started happening some time ago, I think I was using Gnome2 back then. And I have updated my system, and this has happened at least with 3 kernel versions. There's nothing on logs. Well, actually, there's "TCP: Possible SYN flooding on port 6881. Sending cookies" errors on everything.log. But those don't happen when system freezes. And sometimes Chromium stops loading pages but other programs don't freeze, I think it's a problem with cache or something.
Not really sure if this everything happens because of Chromium. I think I'm gonna switch back to Firefox and see what happens. Usually I'm running Chromium, Opera (use it just for a couple of pages), couple of Terminals and Kaffeine.

Strange Problem (easy - I hope)

Similar Messages

Maybe you are looking for