Strange problem: USB devices drawing too much power / not responding - multiple macs

Hi everyone
I was wondering if anyone had any solutions to a rather strange problem.
Yesterday my Lacie USB drive and my USB SD card both stopped working on my Macbook Air.
The USB SD card fails to mount (no power light), my Lacie USB drive brings up a warning that it is "Drawing too much power and will be disconnected".
The only thing I had done the day before was try and plug in a USB externally powered host to connect these two devices (and a printer).
This morning I tried these two devices (Lacie drive and SD card) on a different Mac and both still don't work - I get exactly the same issues as described above.
Is it a coincidence they have both gone wrong at the same time? Could it have been the external hub that broke these? Has anyone else come across anything like this?
I've done some searching and have run the SMC and Pram resets on these machines and it doesn't make any difference. I've also tried a different cable / used the cable on a different USB drive and it works fine.
Any help / advice would be awesome!
Thanks in advance
Martin

Are you talking about the CABLE ,the charger is the device that plugs into the wall socket
if it is the cable it has warranty with the iphone .Cable is intelligent ,they go wrong which is why you have  a warranty
If it is faulty Apple will exchange it but you will have to take it to an Apple store genius bar ,nothing else you can do

Similar Messages

  • USB device drawing too much power error message

    When I try to plug my iPod into my computer to charge or update my music, I get an error message that says, " Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled." I've tried this while my computer was plugged in and not plugged in and it still gives me the same message. My computer is completely new, I've only had it about 2 weeks, my iPod is about 3 years old, but the actual iPod works great. It's just the USB cord that is giving me a problem. What is wrong and how can I fix it?

    My only option is to click "ok." It has already ejected the USB connection, so I don't really have any other choice. Here is the complete text of the message:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled
    To prevent damaging your computer, the USB device drawing too much power has been disabled. Other devices may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again."

  • FOR GURUS: Over Current Notice - USB device drawing too much power

    Hi,
    When I plug a USB extender cable to any USB port on any Mac tested so far, I get the warning:
    "USB Over Current Notice. The USB device is currently drawing too much power. The port it is attached to will be deactivated".
    In fact, that freezes the Mac mouse and keyboard until the USB extender cable is unplugged, and renders the used USB port unusable until the next restart.
    What is going on? Such extender cable worked fine until Virtual PC was open with Windows XP XP2 in safe mode on an iMac G5 (20-inch) with Mac OS X 10.4.3. A 1GB flash pen was inserted, and its files were seen via "My computer". Then the flash pen was taken out (without properly ejecting it via Windows) and someone inserted a 2.2 GB USB hard disk, which froze the Mac and caused the reported problem from that moment.
    So it seems that the USB cable is now somehow defective, but I wonder if it could be fixed, since it does not seem to have any internal circuit but just the USB connectors and cables. So I wonder what is going on...
    Thanks.

    ¡Hola, Gabriel!
    USB Overcurrent Protection issues arise when one or more of the USB devices draw too much power or, by adding a device to a USB hub, one exceeds the current budget for the entire chain. A detailed explanation can be found in this article, where it states:"Should the cumulative current drawn by a group of downstream ports exceed a preset value, the overcurrent protector removes power from all downstream ports. Overcurrent circuits are used to protect against catastrophic device failures, software errors that lead to devices turning on when the current budget has been exceeded, and user-caused events such as the shorting out of connector pins."See also "USB: Hub Description" for important information on self-powered vs. bus-powered UBS hubs.
    Your Apple Pro keyboard is a bus-powered USB hub. Some displays continaing USB ports may act as either bus-powered or self-powered hubs: one has to consult the display's documentation for details.
    • If USB Overcurrent problems arise using a bus-powered, third-party USB hub, try a self-powered hub or connect the USB device directly to one of the built-in USB ports on the computer itself.
    • If USB Overcurrent Protection issues arise when a device is connected directly to one of the built-in USB ports on the computer itself, then the peripheral device or its cable is either damaged or defective.
    Note that you can not put two bus-powered hubs in series. In addition to the article "USB: Hub Description", see also "Apple Pro Keyboard: Devices Connected to Hub May Not Work."
    Good luck!
    Dr. Smoke
    Author: Troubleshooting Mac® OS X

  • USB device drawing too much power...

    I have a Mac Pro 1,1 that until this last software update (10.6.7) was running fine. After the download and reboot, my computer is now riddled with the same error message: "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    To give further understanding of my set up, I am running an ATI Radeon 5770 video card with three monitors attached: on the DVI port is a 32" Samsung flat panel TV, and attached to the two mini DVI ports were two 20" Apple Cinema Displays connected via dual link DVI connectors (each of which was connected to two of the three USB ports on the hub in the back of the Mac Pro tower).
    So, after the software updated and the computer rebooted, the Apple Cinema Displays did not come back on (obvisously because the USB hub in the back of the tower was shut down).
    I have tried repairing permissions. I have reset the PRAM and I have reset the SMC. None of these have thus far worked.
    After a visit to Apple, the Genius told me that it was because there was some discrepancy with the other third pary PCIe cards that have in slots one, two and three. So I confirmed with him that if I pull the cards and reboot, the error message should go away. I pulled all third party cards from the slots and I'm still experiencing the same problem.
    I realize that this sounds like a logic board replacement. But I'm hoping there's someone else out there in the community who may have had a similar problem and may be able to offer any other kinds of work around.
    Just for the record, I am running an RME HDSPe card in slot 1, UAD 1 in slot 2 and UAD 2 in slot three. Slots four and five are occupied by the ATI Radeon 5770.
    Any advice would be appreciated.
    Thank you.

    If you don't have any USB devices plugged in, then your Mac may just be confused. Try an SMC Reset:
    HT3964- Intel-based Macs: Resetting the System Management Controller (SMC)

  • Error message: "USB device drawing too much power"; Battery will no longer hold a charge. Help?

    A few months back a jump drive broke while inserted in my Macbook (the computer fell sideways and cracked the jump drive). That particular USB port no longer works and I keep receiving an error message that tells me a USB device is drawing too much power, even though nothing is plugged into either port.
    It wasn't a huge issue until my battery stopped holding a charge. The computer is usable while plugged in, but as soon as the cord is disconnected it will immediately shut down. I assume this has something to do with the faulty USB port.
    In addition, my CD drive will no longer burn CDs. It will read CDs and allow me to open content from them, but it will no longer burn content to a new disc.
    As soon as I am able I am taking the computer to the store to get checked out, but in the meantime I wanted to see if someone has experienced a similar problem and knows what needs to be replaced or repaired, and how much that might be.

    I guess I should say, abnormally warm. Does it feel like there's a small heater going in there?
    I don't think this is the kind of thing you want to undertake, not if you're asking about how to do it.   I don't know much about the insides of Macbooks other than the parts needing replacing are probably soldered to the rest of the computer.  It's really something you need an expert to investigate. 

  • How to fix: "One or more of your USB device drawing too much power..."

    Plugged my iPhone to do my usual download of photos off my phone into my iPhoto library so that I can edit them and post on eBay and Etsy.  Suddenly, I'm getting the error message: 
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    I'm surmising that it's because my USB cord (connected from my iPhone to MacBook Pro) might be damaged.  It's not charging correctly.  Keeps going on and off when plugged into wall or computer.
    So, will buying a new cord this solve the issue?  I have to get one anyway so I guess I'll find out!
    Meanwhile, for tonight I'll have to do just email the photos to myself.  Ugh.

    It should fix it.  I would unplug all of your other USB devices from the computer and see if it continues with that error.  If so, then certainly replace that cord (do it anyway since its having issues even in the wall)

  • Device drawing too much power...?

    Am trying to charge my original iPhone and both the wall charger as well as computer (mac) do not seem to allow it to charge. When I plug into my computer, I get an error message that says:
    +Because a USB device was drawing too much power from your computer, one or more of your devices have been disabled. To prevent damaging your computer, the USB device drawing too much power may have also been disabled. When you disconnect the device drawing too much power, your other USB devices will be enabled again.+
    When I press the power button on the phone, I get the low battery icon on the screen (red bar showing it needs to be plugged into a power source).
    Not sure what is happening or what to do... Can anyone help?
    Thanks so much in advance.

    Try it with a new cable. The one you have might be damaged.

  • USB port drawing too much power. The device that is plugged into it will be

    I get this strange message every so often, sometimes more often than other times. It says:
    USB port drawing too much power. The device that is plugged into it will be deactivated.
    There are only two things plugged into the USB-The keyboard and mouse. When I get this message, the mouse freezes. If I jiggle the mouse cable where it is plugged into the USB, it comes back and everything is fine until this message comes up again.
    Ever seen this before? What did you do?
    Thanks for your help.

    Ahh I guess I could have figured that out by reading your hardware tag huh...
    So it's giving you the message when booting up from a cold system with NO devices attached? (Not even the keyboard and mouse?).
    How long before you get this message?
    After you get this message, if you plug the mouse in to either USB port (As each port is a seperate bus), to clear the alert, and go into About this Mac, and More info, if you expand the USB info for each bus. Is there anything there that appears to be out the ordinary? (IE Only showing one bus, Showing a device plugged into a bus that isn't plugged in?)

  • Olympus xz-1 camera when connected to ipad2 with supplied ubs cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further!

    olympus xz-1 camera when connected to ipad2 with supplied usb cable into apple usb to 30pin adapter it prompts the ipad to display a message like " this device draws too much power to charge" and then i can go no further! if i take the  card from the camera and put it into the card to 30pin adapter and plug that into the ipad no problems. if i connect the camera with supplied usb cable to desktop imac , no problems. if i connect my olympus slr to the ipad using its usb cable into the apple usb to 30pin , no problem .  very frustrating , i don't want to always have to take the card out of the camera to down load photos to the ipad2,IDEAS?

    I'd ask that on the iPad forum.
    https://discussions.apple.com/community/ipad

  • My USB is dead after msg "USB drive draw too much power"...

    I connected a digital desktop photo thing to my macbook through USB intending to transfer pics to that device; however, my macbook popped out a msg something like, "USB drive draw too much power..." then the Macbook shut down suddenly by it self. After I restart Macbook, my USB is completed dead... how can I revive it?
    I tried plugging in wireless mouse or ipod ... USB has no reaction. Thank you for your help or input in advance!!
    Shally

    Same thing just happened to my Mini, my wife successfully used a SanDisk Micromate adapter to download photos, but when she tried to plug in her iPhone4 the dreaded USB drawing too much power ports will be shutdown msg appeared.  I can plug in the phone on my other Mac no problem, so its the Mini's usb ports.  Help anyone? SMC reset did not work.

  • I got lightning to usb camera adapter but get fault message on ipad mine "cannot use device" the connected usb device requires too much power

    I tried to use lightning to usb camera adapter but every time I plug it into my ipad mine it give cannot use device. the connected usb device requires too much power. how could I use this attachment.

    Or use the camera's SD card instead.
     Cheers, Tom

  • Error cannot use device the connected USB device requires too much power this error appeared  when I added my camera

    Error appeared when I connected my camera to iPad I used a camera connection device error  cannot use device t he connected USB device requires too much power
    Thanking you
    Wendy Banks

    Some cameras are designed to use the power suppled via USB when they're plugged into another device, usually a PC or laptop. The iPad does not supply sufficient power for a camera. The iPad Camera kit allows for either a camera to be plugged in only for the transfer of photos, not as a power sourse, or the removal of the SD Card from a camera so it can transfer photos as an alternative.

  • Lumix FZ47 to macbook, usb device draws to much power!

    i have been using my lumix FZ47 to transfer photos to my macbook and it always pops up with a window saying the usb device draws to much power! what can i do to fix this?
    i have tried all the easy things like plugging the cord to different usb ports, turning the computer on and off but i can't find a solution!
    any help would be great!

    What USB device did you connect - camera, SD card or USB flash drive?  This happens sometimes with cameras and some brands of USB drives. Shouldn't happen with an SD card. Nothing you can do. The device just requires more power than available from the iPad.
     Cheers, Tom

  • HT4101 What does it mean when it says that the USB device requires too much power?

    What does it mean when it says that the USB device requires too much power, when using the ipad lightening pin camera connection kit?

    Just that. The iPad allocates a certain amount of power to that port. If the device you're trying to plug in wants more than the iPad is willing to give, it'll trigger that warning.
    If it's something that you just must hook up you can try using a powered USB hub, but results are mixed at best.
    What are you trying to hook to your iPad?

  • Apple USB keyboard drawing too much power

    I had my apple slim keyboard for more than a year and it always worked perfectly.
    Last week I started receiving this error message at the login screen:
    "Because a USB device was drawing too much power from your computer, one or more of your USB devices have been disabled."
    Changing the USB port used to solve the problem. Since this Sunday I can't get the keyboard to work on any USB port.
    No other devices are using the keyboard as an HUB and the iMac has all the latest updates installed.
    I tried on a Macbook and got the same result, while if connected to an HP laptop it works.
    I already tried:
    - changing USB ports on the rear of the iMac
    - attaching it on an externally powered USB HUB
    - resetting PRAM
    - resetting SMC
    - cleaning the contacts of the USB cable and the ports on the keyboardù
    - attaching usb devices to the ports on the keyboard will give them power, but those are not recognized by the system
    Any clues? I ran out of ideas...
    thanks

    It's related to the current drawn through the USB port itself which us monitored by the SMC and interpreted by the OS. Without getting too technical, Macs are better "tuned" to detect these issues. It sounds like your keyboard is dead or dying as it is drawing more than it's allocated current threshold. Solution, replace the keyboard. Some possible causes over time include, sweaty hands, humidity, coffee - it's the sugar over time that does the damage.

Maybe you are looking for