Strings in a where statement?
A project I have to do says to prepare a report that shows the movie id (mid), title, and genre for all films in the science fiction category (genre=SF)
I wrote:
select mid, title, genre=SF
from movies;
or
select mid, title, genre
from movies
where genre=SF;
or
select mid, title, genre
from movies
where genre = "SF";
and both have errors, what am I doing wrong
I have gone through the chapters in the book and this looks like it should work
wow thank you....I have been working on this problem for three hours now and I didn't realize that I was typing " instead of '. I think I need to take a break from this for a bit...again thank you, I have tried all different commands and finally with your help I got the report I needed.
Similar Messages
-
Query WHERE statement to compare db record date pt 2
I'm sorry, I hit the answered button on my last post. I didn't mean to. I have been working on this code and have gotten closer to the solution. I just need to tweek out the WHERE statement to get rid of the time from the output, and I believe my cfif needs a little work to allow it to be taken into the actually dates. I cfdumped my variables from my query and finally got an output and not an [empty string]. This is my code now, and I will leave in the cfdump and abort tags so you can see where I put them:
<cfquery name="CaleventRec" datasource="#APPLICATION.dataSource#">
SELECT events.eventDate, events.ID AS ID
FROM events
WHERE eventDate Between #NextMonthYear# and #NextMonth# AND eventDate >= #dateFormat(Days, 'dd')#
</cfquery>
this is my cfif stement
<cfoutput query="CaleventRec">
<cfdump var="#eventDate#">
<cfabort>
<cfif Days EQ '#eventDate#'>
<a href = "detail.cfm?id=#ID#">#Days#</a>
</cfif>
</cfoutput>
this is the whole code:
<cfquery name="CaleventRec" datasource="#APPLICATION.dataSource#">
SELECT events.eventDate, events.ID AS ID
FROM events
WHERE eventDate Between #NextMonthYear# and #NextMonth# AND eventDate >= #dateFormat(Days, 'dd')#
</cfquery>
<!--- Set the ThisDay variable to 0. This value will remain 0 until the day of the week on which the first day of the month falls on is reached. --->
<cfset ThisDay = 0>
<!--- Loop through until the number of days in the month is reached. --->
<cfloop condition = "ThisDay LTE Days">
<tr>
<!--- Loop though each day of the week. --->
<cfloop from = "1" to = "7" index = "LoopDay">
<!--- This turns each day into a hyperlink if it is a current or future date --->
<cfoutput query="CaleventRec">
<cfdump var="#eventDate#">
<cfabort>
<cfif Days EQ '#eventDate#'>
<a href = "detail.cfm?id=#ID#">#Days#</a>
</cfif>
</cfoutput>
<!---
If ThisDay is still 0, check to see if the current day of the week in the loop matches the day of the week for the first day of the month.
If the values match, set ThisDay to 1.
Otherwise, the value will remain 0 until the correct day of the week is found.
--->
<cfif ThisDay IS 0>
<cfif DayOfWeek(ThisMonthYear) IS LoopDay>
<cfset ThisDay = 1>
</cfif>
</cfif>
<!---
If the ThisDay value is still 0, or is greater than the number of days in the month, display nothing in the column. Otherwise, dispplay
the day of the mnth and increment the value.
--->
<cfif (ThisDay IS NOT 0) AND (ThisDay LTE Days)>
<cfoutput>
<!--- I choose to highlight the current day of the year using an IF-ELSE. --->
<cfif (#ThisDay# EQ #currentday#) AND (#month# EQ #startmonth#) AND (#year# EQ #startyear#)>
<td align = "center" bgcolor="##FFFF99">
<cfset dayview = #dateformat(createdate(#year#, #month#, #thisday#), "mm/dd/yyyy")#>
<font class = "calendartoday">#ThisDay#</font>
</td>
<cfelse>
<td align = "center">
<cfset dayview = #dateformat(createdate(#year#, #month#, #thisday#), "mm/dd/yyyy")#>
<font class = "calendar">#ThisDay#</font>
</td>
</cfif>
</cfoutput>
<cfset ThisDay = ThisDay + 1>
<cfelse>
<td></td>
</cfif>
</cfloop>
</tr>
</cfloop>
the output from the cfdump is this: the first event date in the month of june.
I need this to match the thisday part of the code in the cfloop function through the days of the week.
Can anyone help me figure this part out?
thank you, and really sorry about the 2nd post. I just woke up and hit the wrong button. again, really sorry all.
CFmongerThis is a small calendar. it will move to the next month at the end of this one, it can also go to the next month with a next / prev button that will let you go as far as you want. It is like all we have seen before. What I need to do it get the eventDate in my DB, that is set as date and put in as mm/dd/yyyy now, basically what I believe the query needs to do it to not only tell what month the calendar is on, but it needs to match any db records with any of the days in that month. Say we are in June: I have 3 records in June, on the 5th, 20th, and 26th. In all the 31 days in the month of June, just those 3 will show a link with an ID to the record that matches in the DB.
I had it narrowed down with that query, but lose the variable once I try and cfif it. So I knew either my query is wrong, or my cfif is, probably both.
does that help? can I make this work? am I even close?
thank you.
CFmonger
By the way, here is the entire code with the next / prev nav for cycling through the months.
<!--- Declaration of the variables --->
<cfparam name = "month" default = "#DatePart('m', Now())#">
<cfparam name = "year" default = "#DatePart('yyyy', Now())#">
<cfparam name = "currentday" default = "#DatePart('d', Now())#">
<cfparam name = "startmonth" default = "#DatePart('m', Now())#">
<cfparam name = "startyear" default = "#DatePart('yyyy', Now())#">
<!--- Set a requested (or current) month/year date and determine the number of days in the month. --->
<cfset ThisMonthYear = CreateDate(year, month, '1')>
<cfset Days = DaysInMonth(ThisMonthYear)>
<!--- Set the values for the previous and next months for the back/next links.--->
<cfset LastMonthYear = DateAdd('m', -1, ThisMonthYear)>
<cfset LastMonth = DatePart('m', LastMonthYear)>
<cfset LastYear = DatePart('yyyy', LastMonthYear)>
<cfset NextMonthYear = DateAdd('m', 1, ThisMonthYear)>
<cfset NextMonth = DatePart('m', NextMonthYear)>
<cfset NextYear = DatePart('yyyy', NextMonthYear)>
<cfset PreviousDay = DateAdd('d', -1, ThisMonthYear)>
<cfset CurrentYear = DatePart('yyyy', Now())>
<table border="0" width="100%" bgcolor ="#ffffff">
<tr>
<td align = "center" valign="top">
<table border="0" width="100%" height="100%">
<tr>
<th align="center" colspan="7" bgcolor="#2b4e6e">
<cfoutput>
<table width="100%" border="0" cellspacing="0" cellpadding="0">
<tr>
<td width="15%" align="left" valign="middle">
<cfif (LastYear lt CurrentYear) OR (LastYear lte CurrentYear AND LastMonth lt startmonth)>
<cfelse>
<a href ="index.cfm?month=#LastMonth#&year=#LastYear#" class="calNav">Prev</a></cfif></td>
<td width="72%" align="center" valign="middle"><FONT SIZE="3" face="Arial, Helvetica, sans-serif" color="##ffffff">#MonthAsString(month)# #year#</FONT></td>
<td width="13%" align="right" valign="middle">
<cfif (NextYear lt CurrentYear) OR (NextYear lte CurrentYear AND NextMonth lt startmonth)>
<cfelse>
<a href = "index.cfm?month=#NextMonth#&year=#NextYear#" class="calNav">Next</a> </cfif></td>
</tr>
</table></cfoutput></th>
</tr>
<tr>
<td><FONT SIZE="2" face="Arial, Helvetica, sans-serif" color="#333366">Sun</FONT></td>
<td><FONT SIZE="2" face="Arial, Helvetica, sans-serif" color="#333366">Mon</FONT></td>
<td><FONT SIZE="2" face="Arial, Helvetica, sans-serif" color="#333366">Tue</FONT></td>
<td><FONT SIZE="2" face="Arial, Helvetica, sans-serif" color="#333366">Wed</FONT></td>
<td><FONT SIZE="2" face="Arial, Helvetica, sans-serif" color="#333366">Thu</FONT></td>
<td><FONT SIZE="2" face="Arial, Helvetica, sans-serif" color="#333366">Fri</FONT></td>
<td><FONT SIZE="2" face="Arial, Helvetica, sans-serif" color="#333366">Sat</FONT></td>
</tr>
<cfquery name="CaleventRec" datasource="#APPLICATION.dataSource#">
SELECT events.eventDate, events.ID AS ID
FROM events
WHERE eventDate Between #NextMonthYear# and #NextMonth# AND eventDate >= #dateFormat(Days, 'dd')#
</cfquery>
<!--- Set the ThisDay variable to 0. This value will remain 0 until the day of the week on which the first day of the month falls on is reached. --->
<cfset ThisDay = 0>
<!--- Loop through until the number of days in the month is reached. --->
<cfloop condition = "ThisDay LTE Days">
<tr>
<!--- Loop though each day of the week. --->
<cfloop from = "1" to = "7" index = "LoopDay">
<!--- This turns each day into a hyperlink if it is a current or future date --->
<cfoutput query="CaleventRec">
<!--- <cfdump var="#eventDate#">
<cfabort>--->
<cfif #dateFormat(eventDate, 'dd')# IS ('Days, LoopDay')>
<cfdump var="#eventDate#">
<cfabort>
<a href = "detail.cfm?id=#ID#">#Days#</a>
</cfif>
</cfoutput>
<!---
If ThisDay is still 0, check to see if the current day of the week in the loop matches the day of the week for the first day of the month.
If the values match, set ThisDay to 1.
Otherwise, the value will remain 0 until the correct day of the week is found.
--->
<cfif ThisDay IS 0>
<cfif DayOfWeek(ThisMonthYear) IS LoopDay>
<cfset ThisDay = 1>
</cfif>
</cfif>
<!---
If the ThisDay value is still 0, or is greater than the number of days in the month, display nothing in the column. Otherwise, dispplay
the day of the mnth and increment the value.
--->
<cfif (ThisDay IS NOT 0) AND (ThisDay LTE Days)>
<cfoutput>
<!--- I choose to highlight the current day of the year using an IF-ELSE. --->
<cfif (#ThisDay# EQ #currentday#) AND (#month# EQ #startmonth#) AND (#year# EQ #startyear#)>
<td align = "center" bgcolor="##FFFF99">
<cfset dayview = #dateformat(createdate(#year#, #month#, #thisday#), "mm/dd/yyyy")#>
<font class = "calendartoday">#ThisDay#</font>
</td>
<cfelse>
<td align = "center">
<cfset dayview = #dateformat(createdate(#year#, #month#, #thisday#), "mm/dd/yyyy")#>
<font class = "calendar">#ThisDay#</font>
</td>
</cfif>
</cfoutput>
<cfset ThisDay = ThisDay + 1>
<cfelse>
<td></td>
</cfif>
</cfloop>
</tr>
</cfloop>
</table>
</td>
</tr>
</table> -
String compare in select statement
Hi All,
i have a problem in select statement. i have a name field in my selection screen, i am using name field to comapre string in my select statement, but i am not getting the resule can anyone suggest me on this . please find my code below,s_name1 is my select option name.
IF s_name1-low IS NOT INITIAL.
LOOP AT S_NAME1.
CONCATENATE s_name1-low '%' INTO s_name1-low.
TRANSLATE s_name1-low TO UPPER CASE.
s_name1-option = 'CP'.
MODIFY s_name1.
ENDLOOP.
ENDIF.
SELECT lifnr land1 name1 ort01 ort02 pfach pstl2 pstlz regio stras
erdat ernam ktokk loevm sperr sperm sperz nodel
INTO (gs_vendor-vendor_num, gs_vendor-land1, gs_vendor-name,
gs_vendor-ort01, gs_vendor-ort02, gs_vendor-pfach,
gs_vendor-pstl2, gs_vendor-pstlz, gs_vendor-regio,
gs_vendor-stras, gs_vendor-created_on, gs_vendor-created_by,
gs_vendor-account_gp, gs_vendor-deletion_flag,
gs_vendor-central_post, gs_vendor-ctr_purch_block,
gs_vendor-payment_block, gs_vendor-central_deletion)
FROM lfa1
WHERE lifnr IN s_lifnr
AND name1 LIKE s_name1
Start of Change G9007789 03/12/2008 - D01K946651
Additional selection criteria added for City and Region
AND ort01 IN s_ort01
AND regio IN s_regio
End of Change G9007789 03/12/2008 - D01K946651
AND ktokk IN s_ktokk
AND ( ktokk NE 'ZHMT' AND ktokk NE 'ZTER' ).
APPEND gs_vendor TO gt_vendor.
CLEAR gs_vendor.
ENDSELECT.Hi,
Have you checked whether you have given proper events.
Check this code below.
AT selection screen output. "Change here
IF s_name1-low IS NOT INITIAL.
LOOP AT S_NAME1.
CONCATENATE s_name1-low '%' INTO s_name1-low.
TRANSLATE s_name1-low TO UPPER CASE.
s_name1-option = 'CP'.
MODIFY s_name1.
ENDLOOP.
ENDIF.
Start-of-Selection. " change here
SELECT lifnr land1 name1 ort01 ort02 pfach pstl2 pstlz regio stras
erdat ernam ktokk loevm sperr sperm sperz nodel
INTO (gs_vendor-vendor_num, gs_vendor-land1, gs_vendor-name,
gs_vendor-ort01, gs_vendor-ort02, gs_vendor-pfach,
gs_vendor-pstl2, gs_vendor-pstlz, gs_vendor-regio,
gs_vendor-stras, gs_vendor-created_on, gs_vendor-created_by,
gs_vendor-account_gp, gs_vendor-deletion_flag,
gs_vendor-central_post, gs_vendor-ctr_purch_block,
gs_vendor-payment_block, gs_vendor-central_deletion)
FROM lfa1
WHERE lifnr IN s_lifnr
AND name1 LIKE s_name1
Start of Change G9007789 03/12/2008 - D01K946651
Additional selection criteria added for City and Region
AND ort01 IN s_ort01
AND regio IN s_regio
End of Change G9007789 03/12/2008 - D01K946651
AND ktokk IN s_ktokk
AND ( ktokk NE 'ZHMT' AND ktokk NE 'ZTER' ).
APPEND gs_vendor TO gt_vendor.
CLEAR gs_vendor.
ENDSELECT.
Reward if helpful.
Regards. -
[PERSISTENCE CLASS] SELECT OPTION in WHERE statement
Hi Gurus,
I would like to know how could I code the WHERE statement with a SELECT OPTION, in Persistence Class ?
Currenlty, I would like to code this kind of request :
DELETE FROM ziTab
WHERE zdate IN so_date.
Do you know, how could I code it ?
Many thx for helps.
Best regards.
Rachid.Sorry Glen,
Unfortunately, I am trying to find the correct syntax to use a SELECT OPTION in a Query Request of Persistence Class:
Something like that:
SELECT-OPTIONS so_date FOR sy-datum .
DATA lo_query_manager TYPE REF TO if_os_query_manager .
DATA lo_query TYPE REF TO if_os_query .
DATA lo_agent TYPE REF TO zca_persistence_zint_rsbankinv.
DATA lo_base TYPE REF TO zcb_persistence_zint_rsbankinv.
DATA lo_rsbankinv TYPE REF TO zcl_persistence_zint_rsbankinv.
DATA lo_table TYPE osreftab .
DATA ls_table TYPE REF TO zcl_persistence_zint_rsbankinv.
DATA ls_tmp TYPE REF TO object .
DATA lv_string TYPE string .
DATA lo_exception TYPE REF TO cx_root .
TRY .
lo_agent = zca_persistence_zint_rsbankinv=>agent.
* Create Query
lo_query_manager = cl_os_system=>get_query_manager( ).
lo_query = lo_query_manager->create_query( i_filter = 'ZEXDAT IN PAR1' ).
lo_table =
lo_agent->if_os_ca_persistency~get_persistent_by_query(
i_query = lo_query
i_par1 = so_date
LOOP AT lo_table INTO ls_tmp.
ls_table ?= ls_tmp .
lv_string = ls_table->zget_all_fields( ).
WRITE lv_string.
ENDLOOP.
CATCH cx_root INTO lo_exception.
lv_string = lo_exception->get_text( ).
WRITE lv_string.
ENDTRY.
But I have an error message :
Syntax error when parsing a query : Excepected symbol 'IN' (row: O, column: 7)
Any idea ? -
Hello All.
I have a datagrid that pulls all its data from a database.
It has two colums - String and Visibile.
I would like to create a function, that acts as a "Where" statement. Its function should look at the datagrid and set the value of a label.text to the String from the datagrid whos Visible value is yes. Only one string can have a visible value of Yes, the rest are no.
So basically all its got to do is look thru the datagrid and set the text value of a label to the string of the item whos visible = Yes.
Im not sure if this can be done with a "Where" statement.
I have tried looking about on Google, but no luck.
Im not sure if i have explained this well enough. Let me know if i havent.
ThanksHello, Thanks again for the reply.
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
xmlns:mx="library://ns.adobe.com/flex/mx" minWidth="955" minHeight="600">
<fx:Declarations>
<!-- Place non-visual elements (e.g., services, value objects) here -->
</fx:Declarations>
<fx:Script>
<![CDATA[
import mx.collections.ArrayCollection;
import mx.collections.XMLListCollection;
import mx.controls.Alert;
import mx.events.FlexEvent;
import mx.events.ListEvent;
import mx.messaging.ChannelSet;
import mx.messaging.channels.AMFChannel;
import mx.messaging.events.MessageAckEvent;
import mx.messaging.events.MessageEvent;
import mx.messaging.messages.AsyncMessage;
import mx.rpc.events.FaultEvent;
import mx.rpc.events.ResultEvent;
import mx.rpc.xml.SimpleXMLEncoder;
import mx.utils.ObjectUtil;
import org.osmf.events.TimeEvent;
import spark.events.TextOperationEvent;
[Bindable] private var StringArr:ArrayCollection = new ArrayCollection(
[{id:"1", string:"String 1", vis:"no"},
{id:"2", string:"String 2", vis:"no"},
{id:"3", string:"String 3", vis:"no"},
{id:"2", string:"String 4", vis:"no"},
{id:"2", string:"String 5", vis:"yes"},
{id:"2", string:"String 6", vis:"no"},]);
protected function getString():void
]]>
</fx:Script>
<mx:DataGrid x="10" y="34" dataProvider="{StringArr}" editable="true">
<mx:columns>
<mx:DataGridColumn headerText="ID" dataField="id"/>
<mx:DataGridColumn headerText="String" dataField="string"/>
<mx:DataGridColumn headerText="Vis" dataField="vis"/>
</mx:columns>
</mx:DataGrid>
<s:Label x="10" y="184" id="VisString" width="210"/>
<s:Button x="237" y="184" label="Get String" click="getString()"/>
</s:Application>
here is my code, for the sake of the example, i have removed the connection to the database and just added an array into the code. But in real the array is pulled from the database.
Now what i want, when the user clicks the "Get String" button, i want the function "getString" to look at the datagrid's array and find the String that has the value vis:Yes. I then want it to return the String associated with that into the text value of VisString.
So for example, when you click "Get String" the function sees that string 5 has the visible Yes, so the text value of VisString should change to "String 5"
Hope you now understand what i mean ? -
Using alias in where statement
simple sql:
SELECT EMPLOYEE_ID,
FIRST_NAME,
LAST_NAME,
EMAIL,
PHONE_NUMBER,
HIRE_DATE,
JOB_ID,
SALARY,
COMMISSION_PCT,
MANAGER_ID,
DEPARTMENT_ID
FROM EMPLOYEES
WHERE EMPLOYEE_ID > 1000;
is it somehow possible to use alias in where statement like
SELECT EMPLOYEE_ID "ID",
FIRST_NAME,
LAST_NAME,
EMAIL,
PHONE_NUMBER,
HIRE_DATE,
JOB_ID,
SALARY,
COMMISSION_PCT,
MANAGER_ID,
DEPARTMENT_ID
FROM EMPLOYEES
WHERE "ID" > 1000;Hi,
is it somehow possible to use alias in where statement likeWhy do you need it?
To answer your question "Not directly"
SQL> select empno eno, sal
2 from emp
3 where eno = 7900;
where eno = 7900
ERROR at line 3:
ORA-00904: "ENO": invalid identifierColumn Alias are names given to give meaningful names to columns or the arithmetic operations' column.
Twinkle -
Revision: 3519
Author: [email protected]
Date: 2008-10-08 04:17:40 -0700 (Wed, 08 Oct 2008)
Log Message:
Fix typo in error string for situations where there are advanced messaging configuration settings from LCDS used in the configuration files but no AdvancedMessagingSupport service. The error string said that there was no flex.messaging.services.AdvancedMessagingService registered but it is the flex.messaging.services.AdvancedMessagingSupport service that needs to be registered.
Add configuration test that starts the server with a destination that has the reliable property set which is an advanced messaging feature but there is no AdvancedMessagingSupport service registered.
Modified Paths:
blazeds/trunk/modules/common/src/flex/messaging/errors.properties
Added Paths:
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/error.txt
blazeds/trunk/qa/apps/qa-regress/testsuites/config/tests/messagingService/ReliableDestina tionWithNoAdvancedMessagingSupport/services-config.xmlHi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲ -
Left outer join 3 tables with where-statement
Hi folks,
I hope you can understand (and maybe solve) my problem.
Generally I try to left outer join three tables. The third table is used for a WHERE-statement.
The three table structures are the following:
table 1 (user)
user1 | key
table 2 (detail)
key | ID
table 3 (header)
ID | user2
...and I want to achieve the following structure (as example filled with data):
user | key | ID
|-----|----
xy | a | 001
xy | b | #
z | b | #
The clue ist the usage of the third table. I need the table to set user1 and user2 equal (WHERE) but there are two problems:
1) Obviously I can't left outer join two tables with each other. In this case I already used the 'key' of table 1 to join it with the 'key' of table 2. So I can't left outer join the 'ID' of table 2 with the 'ID' of table 3. Error message that I can only left outer join a table once. Any proposals?
2) I have to include a WHERE to equal user1 with user2. But I am not allowed to use the user2 from table 3 because of the left outer join.
I tried this coding:
SELECT auser1 akey b~id INTO TABLE itab FROM ( table1 AS a
LEFT OUTER JOIN table2 AS b ON akey = bkey )
LEFT OUTER JOIN table3 AS c ON bID = cID )
WHERE auser1 = cuser2.
I would really appreciate your help.
Regards
MrclSpdlIF you want to join a DB table with an internal table, you need to use the 'FOR ALL ENTRIES' statement.
select dbfields
into table itab2
from dbtab
for all entries in itab
where dbfield1 = itab-field1.
This will get you a second internal table with all the corresponding data for the first selection. You can then join them with a loop through the first table and a read table on the second table (for 1 - 1 relation) or a nested loop statement on both tables (for 1 - N relation). Make itab a hashed table when using read table with key, use a sorted table if you need to loop without key access.
Regards,
Freek -
Deplayment Error: No local string defined -- inconsistent Module State
I'm using Netbeans 4.1 and when I tried to deploy and run the project I get the
No local string defined -- inconsistent module state error
This error showed up after I added a Stateless Session Bean using a Timer Service. Unfortunately, even after I got rid of the Stateless SB the error remained.
Does anyone know what this error mean and/or how to get rid of it?
Thanks in advance,
eac004Thanks,
I looked at the log file and what I noticed is that when the server is comming up it generates a couple warnings like:
default-locale attribute of locale-charset-info element has been deprecated and is being ignored. Use default-charset attribute of parameter-encoding element instead
I don't see any warnings when the apllication is being deployed except the Severe error mesaage No local string defined -- inconsistent Module State
Any ideas how I can clear the warning? -
No local string defined -- Inconsistent Module State
I am trying to deploy an Enterprise Application and during compilation I get the following error.
Any idea?
I am using Sun Java System Application Server 8.1 and jdk1.5.0_08,
javax.enterprise.system.tools.deployment|_ThreadID=14;|Se produjo una excepci�n en la fase de J2EEC
com.sun.enterprise.deployment.backend.IASDeploymentException: No local string defined -- Inconsistent Module State
at com.sun.enterprise.security.SecurityUtil.linkPolicyFile(SecurityUtil.java:321)
at com.sun.enterprise.deployment.backend.AppDeployerBase.generatePolicy(AppDeployerBase.java:377)
at com.sun.enterprise.deployment.backend.AppDeployer.doRequestFinish(AppDeployer.java:108)
at com.sun.enterprise.deployment.phasing.J2EECPhase.runPhase(J2EECPhase.java:146)
at com.sun.enterprise.deployment.phasing.DeploymentPhase.executePhase(DeploymentPhase.java:71)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.executePhases(PEDeploymentService.java:633)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:188)
at com.sun.enterprise.deployment.phasing.PEDeploymentService.deploy(PEDeploymentService.java:520)
at com.sun.enterprise.management.deploy.DeployThread.deploy(DeployThread.java:143)
at com.sun.enterprise.management.deploy.DeployThread.run(DeployThread.java:172)solved.
1. do a search for everything under domain1 with the given app name
2. delete those files
3. bounce the application server -
I find it annoying that you can't use aliases in where statements
I find it annoying that you can't use aliases in where
statements
for example:
SELECT TOP 1
CAST(amount
/ ( CASE WHEN ISNULL(rate, 0) <> 0 THEN rate
ELSE 1
END ) AS NUMERIC(10, 2)) AS num
FROM table
WHERE num > 1
ORDER BY num
Are there any workarounds?> I find it annoying that you can't use aliases in where
statements
This isn't really (or... "at all") a CF question. You're
better off asking
this sort of thing on a SQL Server forum.
You could use a derived table, I guess:
select top 1 num
from (
SELECT
CAST(amount
/ ( CASE WHEN ISNULL(rate, 0) <> 0 THEN
rate
ELSE 1
END ) AS NUMERIC(10, 2)) AS num
FROM table
where num > 1
order by num
(that might not preserve the intent of you SQL (sorry: it's
late, I'm
tired), but you get the idea.
Adam -
Group function is not allowed here - where statement
I have a select that is basically:
select a,b,
sum(c),sum(d),
sum(c) - sum(d)
from A
group by a, b
I would like to add:
where sum(c) - sum(d) <> 0
I know that I can't use the sum function in the where statement.
Any ideas how I can get around it?
Thanks.
LeahHi ,
for instance ... using the count aggregate function... which is the same as using sum function.....
SQL> select job , cnt_emp , cnt_sal
2 from
3 (
4 select job, count(empno) cnt_emp, count(sal) cnt_sal
5 from emp
6 group by job
7 )
8 where cnt_emp- cnt_sal=0
9 /
JOB CNT_EMP CNT_SAL
CLERK 5 5
SALESMAN 5 5
PRESIDENT 1 1
MANAGER 3 3
ANALYST 2 2Greetings.... -
Hi,
I need a possibility to enter the where-statement at runtime.
In the "SQL Query Statement" I can enter a query and parameters.
My Problem ist that at runtime my forms-application builds the where-Part of the sql-statement and then sends it to the report.
I know that reports has the &where_clause option.
In &where_clause I can enter the whole where-clause of every statement.
But how can I "tell" reports that it's query should based on this &where_clause???
In other words: can I set the "sql Query Statement" at runtime?
Thank you for your help
bye
FlorianHi Florian,
In the data model, you can create a user parameter "P_WHERE" varchar2(1000), set your query like this:
select col1,...coln
from table
where &P_WHERE;
At the run time, you should pass the Where value from
your form_application and send it to the parameter P_WHERE
of the report.
Hope this helps,
CB -
Trigger fails when variable used in WHERE statement
I have a trigger that works when the following statment is in it:
SELECT custcall.callrkey into v_callrkey from custcall where custcall.servno = 152345;
But the trigger fails when I attempt to use a variable in the where statement as follows.
SELECT custcall.callrkey into v_callrkey from custcall where custcall.servno = :new.servno ;
Even though I have verified that the value of :new.servno is set to 152345 by outputting the value . That is the only difference between the working version and the non-working version. By not working I mean that the email which is to be sent by the trigger is not received.
Can anyone give me any ideas of how I could troubleshoot this or what might me happening? I'm pretty new to this and
feel that I'm missing something very simple. My apologies in advance if this has been posted elsewhere. I did spend a lot of time searching the forum before posting.
This is Oracle 9i.
Thanks!
Full code probably not necessary but posted below just in case:
create or replace
TRIGGER EMAILNOTIFY_NEW_SR
AFTER INSERT ON CUSTPROB
FOR EACH ROW
DECLARE
--SMTP Variables
vreply utl_smtp.reply;
vreplies utl_smtp.replies;
mailCONN utl_smtp.connection;
mailHOST VARCHAR2(64) ;
--MESSAGE Variables
mailText VARCHAR2(64);
mailFROM VARCHAR2(64);
mailTO VARCHAR2(64);
mailDATE VARCHAR2(20);
v_servno number ;
v_callrkey number ;
--PROGRAM Variables
i number;
BEGIN
--get some values from the database
--set values for variables...
mailHOST:= '10.35.173.15'; --this will always stay the same
mailFROM := 'Facilities_Customer_Service_Center'; --this will always stay the same
mailTO := '[email protected]';
SELECT custcall.callrkey into v_callrkey from custcall where custcall.servno = :new.servno ;
SELECT TO_CHAR(SYSDATE,'MM/DD/YYYY HH24:MI:SS') INTO mailDATE FROM dual;
dbms_output.put_line('open_connection');
dbms_output.put_line('---------------');
vreply := utl_smtp.open_connection(mailHOST, 25, mailCONN);
dbms_output.put_line('helo');
dbms_output.put_line('----');
vreply := utl_smtp.helo(mailCONN, mailHOST);
dbms_output.put_line( 'code = ' || vreply.code );
dbms_output.put_line( 'text = ' || vreply.text );
dbms_output.put_line('mail');
dbms_output.put_line('----');
vreply := utl_smtp.mail(mailCONN, mailFROM);
dbms_output.put_line( 'code = ' || vreply.code );
dbms_output.put_line( 'text = ' || vreply.text );
dbms_output.put_line('rcpt to');
dbms_output.put_line('----');
vreply := utl_smtp.rcpt(mailCONN, mailTO);
dbms_output.put_line( 'code = ' || vreply.code );
dbms_output.put_line( 'text = ' || vreply.text );
dbms_output.put_line('open_data');
dbms_output.put_line('---------');
vreply := utl_smtp.open_data(mailCONN);
dbms_output.put_line( 'code = ' || vreply.code );
dbms_output.put_line( 'text = ' || vreply.text );
--SMTP ENVELOPE STUFF (In case it is needed later).
--utl_smtp.write_data(mailCONN, 'From:' ||mailFROM || chr(13));
-- utl_smtp.write_data(mailCONN, 'To: '||mailTo || chr(13));
--utl_smtp.write_data(mailCONN, 'CC: '||mailFROM || chr(13));
--utl_smtp.write_data(mailCONN, 'Date: '||mailDATE || chr(13));
--utl_smtp.write_data(mailCONN, 'BCC: '||mailFROM || chr(13));
--THE MESSAGE
utl_smtp.write_data(mailCONN, 'Subject: '||'Your Facilities Service Request ' ||'(SR '||v_servno||')'|| chr(13));
utl_smtp.write_data(mailCONN, '');
utl_smtp.write_data(mailCONN, '');
utl_smtp.write_data(mailCONN, 'Dear Customer ' || chr(13));
utl_smtp.write_data(mailCONN, '');
utl_smtp.write_data(mailCONN, 'This is to inform you of something.' || ' ' ||mailTO|| chr(13) );
utl_smtp.write_data(mailCONN, 'Please call us with any questions or concerns. ' || '' || chr(13));
--DEBUG
utl_smtp.write_data(mailCONN, 'DEBUG: ' || ''|| chr(13));
utl_smtp.write_data(mailCONN, 'v_Servno ' || v_servno || chr(13));
utl_smtp.write_data(mailCONN, 'v_callrkey ' || v_callrkey || chr(13));
--END THE MESSAGE
dbms_output.put_line('close_data');
dbms_output.put_line('----------');
vreply := utl_smtp.close_data(mailCONN);
dbms_output.put_line( 'code = ' || vreply.code );
dbms_output.put_line( 'text = ' || vreply.text );
dbms_output.put_line('quit');
dbms_output.put_line('----');
vreply := utl_smtp.quit(mailCONN);
dbms_output.put_line( 'code = ' || vreply.code );
dbms_output.put_line( 'text = ' || vreply.text );
END;Justin,
Thanks for the reply. I'm away for a couple of days but when I get back to this I'm going to follow up on your suggestion about servno. I'm starting to think that the issue isn't with servno but rather that the select query doesn't return anything because the value I'm trying to get is in another table and is not being inserted in time for me to get them. This will be easiy enough to test. To be honest, I don't know very much about how things are being inserted.
I appreciate your and Tubby's (and Tom's) concerns. Maybe I'll go back to the drawing board next week. But note that I'm not inserting anything with this trigger--only sending an email based on the insert that is happening through an application. So unless I'm really missing it, my email is dependent on the insert but not vice versa. Since my email is absolutely critical but rather jus a courtesy thing, I was taking a pretty laid back attitude about it but it would be good for me to learn a better way.
Thanks again to all! I'll report back what I find/decide. -
Nav attribute in where-statement
Hi Experts,
I have a routine in which I want to select 0MAT_SALES where my navigation attribute ZACCASGRP equals some values. I have written the code below but I get a syntax error when trying to compile it. I do not get any suggestions and I have not been able to figure out the problem.
data: BEGIN OF Z_FUNDGROUP occurs 0,
/BI0/OIMAT_SALES TYPE /BIC/AZBILCOPA00-MAT_SALES,
END OF Z_FUNDGROUP.
SELECT * FROM /BIC/AZBILCOPA00
Into corresponding fields of table Z_FUNDGROUP
where MAT_SALES-ZACCASGRP IN ('a', 'b', 'c').
My problem is the where-statement and I have also tried with the following combinations but non of them works:
/BI0/OIMAT_SALES-ZACCASGRP
/BI0/OIMAT_SALES-0MAT_SALES__ZACCASGRP
MAT_SALES-0MAT_SALES__ZACCASGRP
if I change it to only say: where MAT_SALES IN ('a', 'b', 'c'). I do not get the error (but this is of course useless since I am not restricting on my navigation attrivute).
Can somebody please help me with this.
Thank you in advance,
MikaelHi,
You are probably right regarding the Select-statement above. I therefore reasoned that I should be able to re-structure my problem and use the following select-statements instead:
SELECT MAT_SALES
FROM /BI0/PMAT_SALES
INTO TABLE Z_FUNDGROUP
WHERE
MAT_SALES IN (
SELECT DISTINCT MAT_SALES
FROM /BIC/AZBILCOPA00
AND /BIC/ZACCASGRP IN ('a', 'b', 'c').
but when I do this I still get errors. If I skip the "AND /BIC/ZACCASGRP IN ('a', 'b', 'c')" part it gives me valid results, but I have to be able to use this attribute. When I look at the master data table /BI0/PMAT_SALES in SE16 it shows me that there is a field named /BIC/ZACCASGRP and then I do not understand why I cannot use the above select.
Best regards,
Mikael
Maybe you are looking for
-
Not able to get the message from Queue using MQ adapter
HI Using Mq adapter am able to put the message in a queue and am able to get the message if i select the schema type as opaque, but am not able to get the message if i specify any schema type and am getting timed out exception. Kindly help to proceed
-
Custom user name validation in subscription to event
Hello, I am on R11.5.10.2 and trying to create fnd_users using FND_USER_PKG.CREATEUSER. But i am getting following error : ORA - 20001: Custom user name validation in subscription to event oracle.apps.fnd.user.name.validate failed. The above mention
-
Raido icon next to tracks in my libary
Not sure what happend but, I recently installed itunes 5 and now I am seeing some extra tracks in my libary. These tracks have the radio icon next to the check mark, they are duplicate tracks of songs I already have in my libary. Could someone please
-
Reinstalling Adobe XI previously installed on a PC which crashed since then
I have purchased Acrobat Reader XI less than two months ago and installed on my laptop however that one crashed last week so I had to acquire a brand new laptop. To reinstall Adobe Reader XI on my new laptop, I signed on my Adobe and I downloaded aga
-
An install service of Solaris 11.2 on the AI server of Solaris 11.1
Hi all, Is it possible to create an AI install service of Solaris 11.2 on the AI server of Solaris 11.1? Thanks